2026-05-01 - 2026-10-31
Overview
5 Releases published by 1 user
Published
V4.0.4
Published
V4.0.3
Published
V4.0.2
Published
V4.0.1
Published
V4.0.0
245 Issues closed from 1 user
Closed
#300 How to build for RAK4631?
Closed
#299 CAD setting not respected
Closed
#298 iGate Firmware 4.0.4 / T-Beam 1W / Power setting max 22dBm
Closed
#296 Wiki needs improvement for connecting BME280
Closed
#295 Not sure if its my device or not
Closed
#294 RF-to-APRS-IS path does not suppress locally repeated packets
Closed
#291 iGate - Not sending received APRS packets to APRS server
Closed
#289 RAK4631 Digipeater v.4.0.0 uploader of firmware issue
Closed
#288 Tactical Callsign Is Not Being Passed to APRS Network
Closed
#287 Time zone offsets are not only by hours worldwide
Closed
#285 Disabling AutoAP with no SSID configured causes a boot loop (lwip assert in WEB_Utils::setup)
Closed
#284 Heltec V3.2 does not sent telemetry and gps possition to APRS-FI
Closed
#283 Digipeater emits malformed path with a double asterisk (CALL**) in WIDE2-n mode
Closed
#279 Heltec V3.2 very dim display.
Closed
#277 TTGO T-Beam V1.0 , V1.1, V1.2 (also variations with SX1262 and SX1268 LoRa Modules) and Supreme V3.
Closed
#276 LilyGo T-Beam 1W 433 MHz not working
Closed
#274 LilyGo T-Beam Supreme V3.0 OLED Doesn't Work
Closed
#273 Please add Send beacon via APRS-IS and Send beacon via RF on different times.
Closed
#267 Can't start Wi-Fi mode on t114 tracker
Closed
#266 GPS (DIY) problem
Closed
#265 Using USB or Bluetooth to connect KISS
Closed
#264 Firmware 3.2.3 not work APRS
Closed
#263 Bug in LILYGO LORA32 433MHz ESP32 GPS?
Closed
#262 WEBUI needs to show current time.
Closed
#261 LilyGo Display Not Timing Out
Closed
#260 V_ext problem in the latest version (Heltec WSL)
Closed
#259 Is it possible to have no Beacon Path
Closed
#258 Won't upload APRS spots
Closed
#257 Display stays dark on Heltec Wireless Tracker v1.2
Closed
#256 Link to PDF manual on Wiki page not working
Closed
#255 OTA update not working
Closed
#254 Allow "Beacon Comment" to send at an interval, not every time
Closed
#253 ?APRSP --> 2 or 3 decimals?
Closed
#252 Wiki add (LoRa APRS iGate CA2RXU Firmware Manual)
Closed
#251 Heltec Wireless stick lite V3 (433Mhz) wont connect to Wi-Fi after saving setting. wont start own AP as well.
Closed
#250 Add explanations to the beacon symbol selection field
Closed
#249 Digipeating issue ...
Closed
#248 No Screen Heltec V3
Closed
#245 Command ?APRSSR doesn't work reliably
Closed
#244 Beacon time
Closed
#243 Specify IS server
Closed
#242 T-Beam problem
Closed
#241 update OTA
Closed
#239 Send Status every XXXX minutes
Closed
#238 Battery timer?
Closed
#237 No display on Heltec V3
Closed
#236 BMP280 + AHT20
Closed
#235 Core 1 panic'ed
Closed
#233 APRS Message/Queries - The LilyGO T-Deck appears to have no "equal" "=" symbol key available?
Closed
#232 NTP GMT correction
Closed
#231 Heltec Wireless Paper 1.2 version
Closed
#230 PDF con error
Closed
#229 QRPLabs LightGateway Plus (Solar) 1.0 reboot loop at startup when unable to find programmed network
Closed
#228 Send beacon over MQTT
Closed
#227 OTA updates not working on Heltec V3.2
Closed
#226 NTP not working on V3.1.3
Closed
#225 Frames received from TNC client not transmitted to APRS-IS
Closed
#221 Possible leading zero bug for Callsign designations.
Closed
#220 Problems updating iGate from version 3.0 to 3.1.2 via OTA
Closed
#219 Issue reporting negative elevations
Closed
#216 Possible new WebUI configuration bug in version 25-09-09:
Closed
#215 Feature request: Show DATE in LAST 10 RECEIVED PACKETS LIST
Closed
#213 QRP-LABS LightGateway Plus (Solar) 1.0 solar voltage input pin?
Closed
#212 Heltec V3.2 not receiving packets
Closed
#211 Heltec Wireless Bridge
Closed
#210 T-DECK PLUS NO KEYBOARD ERROR
Closed
#209 433 MHz Heltec V3 Output Power
Closed
#208 Multiple SYSLOG servers
Closed
#207 Igate Will not connect to wifi extender
Closed
#206 Automatic power on
Closed
#205 T-Beam Supreme V3 Corrupt Display
Closed
#204 add support to ina219/ina3221
Closed
#203 Version 3 and WX sensor support in Ultra ECO mode
Closed
#202 Error opening serial port - YAAC
Closed
#201 Version 3 iGate firmware - error with negative longitude
Closed
#200 No field control on callsign
Closed
#199 Not showing on map @ https://lora-aprs.live
Closed
#197 Feature request: NTP server customization
Closed
#196 alternative WX data source
Closed
#195 feature request - received Packets display of the date
Closed
#194 Manager's call upper case
Closed
#191 Can't seem to connect to Wifi that doesn't use password
Closed
#190 LoRa iGate Received Packets refresh intermittent or not populating
Closed
#188 Blacklist not working as expected
Closed
#187 what is /dev/tty* for KISS TNC LoRa IGate?
Closed
#186 Add option to enable wifi AP with a button when in Eco mode
Closed
#184 Enable APRS-IS connection iusse
Closed
#183 Voltage telemetry sending - what's the conditions?
Closed
#182 Barometer altitude from GPS
Closed
#181 igate 433mhz v2025.01.22 on Heltec v3 doesn't send information to aprs from other trackers/stations.
Closed
#178 T-beam versions - AXP192 is replaced by an AXP2101. And sending temperature in degrees of Celsius.
Closed
#177 OLED time out activation
Closed
#176 APRS-IS filter activation
Closed
#172 Circuit for ESP32 and Lora module connection?
Closed
#169 Heltec V3.2
Closed
#168 Eco Mode - How to?
Closed
#167 aprs
Closed
#166 Heltec Lora32 new revision V3.2
Closed
#165 Igate/Repeater in repeater ony mode does not send beacon
Closed
#164 too fast(?) reboot after restoring from backup
Closed
#163 A lot of CRC ERROR
Closed
#161 Feature Request: Add Minutes to GMT Time Correction Option
Closed
#160 Invalid TX packet
Closed
#159 LILYGO T3 TCXO - New board
Closed
#158 Is it possible to set a different TX and RX frequency as Digirepeater
Closed
#156 Eco Mode exit for HT-CT62 not working
Closed
#155 Igate on Lilygo T Beam Supreme
Closed
#154 Heltec Esp32 V3 TX non stop
Closed
#153 incorrectly decoded gps coordinates from some packets in syslog
Closed
#151 igate not reconnecting to Wi-Fi after wake from sleep
Closed
#150 Question: How do I setup 2024.11.06 for digi only?
Closed
#149 Variant heltec_wireless_tracker_v1.1
Closed
#148 TX RX frequency parameter
Closed
#147 Heltec Lora 32 V2 LCD not working
Closed
#144 Web page: Can't delete WiFi network
Closed
#143 TX on wrong frequency
Closed
#140 No more connect to APRS-server possible
Closed
#139 Just a small TYPO ...
Closed
#138 Feature request: Headless iGate (without OLED display) #173
Closed
#137 Portable iGate: How to use the internal GPS of T-Beam
Closed
#136 Disable the GPS module on ttgo-t-beam-v1
Closed
#133 Public syslog server + signal tracking web page / API
Closed
#131 External Voltage Measurement Heltec Wireless LoRa V3
Closed
#130 HELTEC Wireless Stick No Display
Closed
#128 Heltec Lora 32 V3 Display Timeout
Closed
#127 Heltec Lora 32 V3 Display problem
Closed
#124 feature request: system time via ntp
Closed
#123 Support for LLCC68
Closed
#122 Heltec Lora V3 entering sleep on boot with voltage present
Closed
#121 Web Flasher for Trackers?
Closed
#120 Error when trying to OTA update
Closed
#119 More issues with Wifi AutoAP
Closed
#117 no feeedback when invalid passcode
Closed
#116 Wheater data rainfall
Closed
#115 Add support for Meshtastic-DIY board
Closed
#114 [Feature Request]Print WiFi MAC address at boot
Closed
#113 Callsign does not pass validation.
Closed
#112 Add support for ANDFLmsg
Closed
#111 [Feature Request] Option to send battery voltage as telemetry data
Closed
#110 iGate on SSID-11 won't beacon via KISS over IP set to same SSID as iGate
Closed
#109 Fix for iGate never returning from Auto AP
Closed
#107 Support for Lillygo Ver1 boards
Closed
#106 Add Support / Documentation for WOAD on Android
Closed
#105 Add support for YAAC
Closed
#104 Add support for PAT
Closed
#103 Switch between battery and USB
Closed
#102 Question: restore from config file
Closed
#101 After the update mine no longer works.
Closed
#100 Question: unused Pin's
Closed
#99 Igate KISS via TCP not discoverable on IOS: Avahi service?
Closed
#98 Web page: BATTERY section layout - group Internal and external voltage options
Closed
#97 web page : Received packets
Closed
#96 Digipeater name not added to some packet
Closed
#95 Web page: EXPERIMENTAL section - Low voltage cut off (Deep sleep below specific voltage)
Closed
#94 Feature Request - Power fail recovery
Closed
#93 Crash after SAVE with option Send External Voltage/Monitor External Voltage Health
Closed
#92 Syslog messages don't show up in Visual Syslog Server nor WinSyslog
Closed
#91 Heltec WSL V3 with BME280 sensor is sending "g...t...r...p...P...h.. b...."
Closed
#90 OLED display AlwaysOn
Closed
#89 internal and external voltage as Telemetry
Closed
#88 BME280 not work
Closed
#87 USB power monitoring
Closed
#86 Configuration Restore not working
Closed
#85 Packet Gated from IS to RF are not sent using proper thirdpartyformat
Closed
#84 Support for Lilygo 1.6.1
Closed
#83 WiFi not connecting if iGate is turned on before WiFi AP
Closed
#82 Support Heltec Wireless Tracker
Closed
#81 Removing WiFi network doesn't work in Web UI
Closed
#80 RADIOLIB_ERR_CRC_MISMATCH / 0dBm / 0.00dB / 0Hz
Closed
#79 TTGO TCP 8001 connection error
Closed
#78 Display do not shut down after time-out
Closed
#77 no position when "Send our beacon to APRS-IS" on || Lilygo T3 v1.6.1
Closed
#76 Backup / Restore does not recover everything
Closed
#75 BME680 not working on Lilygo T3 V1.6.1
Closed
#74 Release build
Closed
#73 Heltec V3 SPIFFS mount failed
Closed
#72 Heltec WiFi LoRa V3.1 - Starting LoRa failed!
Closed
#71 Got TBeam v1.1 915Mhz works
Closed
#70 Support for Destination Address Digipeating
Closed
#69 LoRa Chip issue
Closed
#67 Heltec V3 (esp32 s3) install failed - invalid header: 0xffffffff [Web flasher]
Closed
#66 APRSdroid kiss tnc connection lost (TNC KISS Server)
Closed
#65 voltage battery on Heltec V2
Closed
#64 Beacon logic issue
Closed
#63 Feature request: Bluetooth
Closed
#62 Feature request: Note field in webgui
Closed
#61 NEW feature - Traccar (OsmAnd protocol)
Closed
#60 Display always on
Closed
#59 PinPoint serial KISS only produces a callsign and not a callsign-SSID position report
Closed
#58 Compressed location details
Closed
#57 Feature request : comment text in syslog output
Closed
#56 BME heightCorrection
Closed
#55 2024-04-13 version
Closed
#54 OTA username/pw is not read from config
Closed
#53 BME280
Closed
#52 version 2024.04.09 config issue
Closed
#51 No battery voltage in beacon
Closed
#50 Connect to Findu-Server
Closed
#49 Connection time to wifi
Closed
#47 Feature request: add version number to the WebUI
Closed
#46 Unstable Wifi ?
Closed
#45 Feature Request: GPS in iGate
Closed
#44 heltec_wireless_stick_lite envelop in platform.ini
Closed
#43 Feature request: Turn wifi off after 10 minutes to save battery in Digimode
Closed
#42 Feature request: behaviour similar to old StationMode=5, but triggered by APRS-IS connect
Closed
#41 Feature Request: KISS output
Closed
#40 Measure external volatage is greyed out in WebUI
Closed
#39 Radiolib bandwidth
Closed
#38 Packet corruption
Closed
#37 Beacon path issue
Closed
#36 Secure access to Web Configuration UI.
Closed
#35 Web: Removing WiFi-APs ruins whole config
Closed
#34 Cross-band-like APRS connectivity
Closed
#33 OTA upgrade procedure
Closed
#32 Virus detected in Source files
Closed
#31 Web interface - coding rate configuration issue
Closed
#30 Recommended Settings for Pinpoint APRS
Closed
#29 OTA password issue
Closed
#28 Cannot compile
Closed
#27 Use GPS for iGate coordinates
Closed
#26 BME280 Sensor: Atmospheric pressure values not correct
Closed
#25 Static IP address
Closed
#24 PSE Help or FAQ for Syslog
Closed
#23 igate and digi + wx ?
Closed
#22 Option to send battery voltage as telemetry.
Closed
#21 Is support for the LILYGO®TTGO T-Echo and similar nRF52 boards possible?
Closed
#20 Not hearing APRS
Closed
#19 qAO substring is misplaced in IS-packet, when string contains a ":"
Closed
#18 free band
Closed
#17 Error stationMode Not valid
Closed
#16 No Syslog with stationMode = 5
Closed
#15 Wrong Battery Voltage
Closed
#14 stationMode position 2
Closed
#13 StationMode Not Valid
Closed
#11 Lilygo APX2101
Closed
#10 igate asl elevation in config.json
Closed
#9 Security issue with OTA
Closed
#8 stationMode Not Valid in Heltec WiFi LoRa 32 V2
Closed
#7 Add auto reboot
Closed
#6 Igate to digipeater mode if wifi fails
Closed
#5 Mode symbols
Closed
#4 Aprs beacon
Closed
#3 Display always on
Closed
#2 Send voltage/Current charge/discharge from the battery in the comment or telemetry
Closed
#1 Support for telemetry
300 Issues created by 1 user
Opened
#1 Support for telemetry
Opened
#2 Send voltage/Current charge/discharge from the battery in the comment or telemetry
Opened
#3 Display always on
Opened
#4 Aprs beacon
Opened
#5 Mode symbols
Opened
#6 Igate to digipeater mode if wifi fails
Opened
#7 Add auto reboot
Opened
#8 stationMode Not Valid in Heltec WiFi LoRa 32 V2
Opened
#9 Security issue with OTA
Opened
#10 igate asl elevation in config.json
Opened
#11 Lilygo APX2101
Opened
#12 Please add support for W32-ETH01 board
Opened
#13 StationMode Not Valid
Opened
#14 stationMode position 2
Opened
#15 Wrong Battery Voltage
Opened
#16 No Syslog with stationMode = 5
Opened
#17 Error stationMode Not valid
Opened
#18 free band
Opened
#19 qAO substring is misplaced in IS-packet, when string contains a ":"
Opened
#20 Not hearing APRS
Opened
#21 Is support for the LILYGO®TTGO T-Echo and similar nRF52 boards possible?
Opened
#22 Option to send battery voltage as telemetry.
Opened
#23 igate and digi + wx ?
Opened
#24 PSE Help or FAQ for Syslog
Opened
#25 Static IP address
Opened
#26 BME280 Sensor: Atmospheric pressure values not correct
Opened
#27 Use GPS for iGate coordinates
Opened
#28 Cannot compile
Opened
#29 OTA password issue
Opened
#30 Recommended Settings for Pinpoint APRS
Opened
#31 Web interface - coding rate configuration issue
Opened
#32 Virus detected in Source files
Opened
#33 OTA upgrade procedure
Opened
#34 Cross-band-like APRS connectivity
Opened
#35 Web: Removing WiFi-APs ruins whole config
Opened
#36 Secure access to Web Configuration UI.
Opened
#37 Beacon path issue
Opened
#38 Packet corruption
Opened
#39 Radiolib bandwidth
Opened
#40 Measure external volatage is greyed out in WebUI
Opened
#41 Feature Request: KISS output
Opened
#42 Feature request: behaviour similar to old StationMode=5, but triggered by APRS-IS connect
Opened
#43 Feature request: Turn wifi off after 10 minutes to save battery in Digimode
Opened
#44 heltec_wireless_stick_lite envelop in platform.ini
Opened
#45 Feature Request: GPS in iGate
Opened
#46 Unstable Wifi ?
Opened
#47 Feature request: add version number to the WebUI
Opened
#48 NEW feature. E-ink
Opened
#49 Connection time to wifi
Opened
#50 Connect to Findu-Server
Opened
#51 No battery voltage in beacon
Opened
#52 version 2024.04.09 config issue
Opened
#53 BME280
Opened
#54 OTA username/pw is not read from config
Opened
#55 2024-04-13 version
Opened
#56 BME heightCorrection
Opened
#57 Feature request : comment text in syslog output
Opened
#58 Compressed location details
Opened
#59 PinPoint serial KISS only produces a callsign and not a callsign-SSID position report
Opened
#60 Display always on
Opened
#61 NEW feature - Traccar (OsmAnd protocol)
Opened
#62 Feature request: Note field in webgui
Opened
#63 Feature request: Bluetooth
Opened
#64 Beacon logic issue
Opened
#65 voltage battery on Heltec V2
Opened
#66 APRSdroid kiss tnc connection lost (TNC KISS Server)
Opened
#67 Heltec V3 (esp32 s3) install failed - invalid header: 0xffffffff [Web flasher]
Opened
#68 TTGO T-Internet-POE
Opened
#69 LoRa Chip issue
Opened
#70 Support for Destination Address Digipeating
Opened
#71 Got TBeam v1.1 915Mhz works
Opened
#72 Heltec WiFi LoRa V3.1 - Starting LoRa failed!
Opened
#73 Heltec V3 SPIFFS mount failed
Opened
#74 Release build
Opened
#75 BME680 not working on Lilygo T3 V1.6.1
Opened
#76 Backup / Restore does not recover everything
Opened
#77 no position when "Send our beacon to APRS-IS" on || Lilygo T3 v1.6.1
Opened
#78 Display do not shut down after time-out
Opened
#79 TTGO TCP 8001 connection error
Opened
#80 RADIOLIB_ERR_CRC_MISMATCH / 0dBm / 0.00dB / 0Hz
Opened
#81 Removing WiFi network doesn't work in Web UI
Opened
#82 Support Heltec Wireless Tracker
Opened
#83 WiFi not connecting if iGate is turned on before WiFi AP
Opened
#84 Support for Lilygo 1.6.1
Opened
#85 Packet Gated from IS to RF are not sent using proper thirdpartyformat
Opened
#86 Configuration Restore not working
Opened
#87 USB power monitoring
Opened
#88 BME280 not work
Opened
#89 internal and external voltage as Telemetry
Opened
#90 OLED display AlwaysOn
Opened
#91 Heltec WSL V3 with BME280 sensor is sending "g...t...r...p...P...h.. b...."
Opened
#92 Syslog messages don't show up in Visual Syslog Server nor WinSyslog
Opened
#93 Crash after SAVE with option Send External Voltage/Monitor External Voltage Health
Opened
#94 Feature Request - Power fail recovery
Opened
#95 Web page: EXPERIMENTAL section - Low voltage cut off (Deep sleep below specific voltage)
Opened
#96 Digipeater name not added to some packet
Opened
#97 web page : Received packets
Opened
#98 Web page: BATTERY section layout - group Internal and external voltage options
Opened
#99 Igate KISS via TCP not discoverable on IOS: Avahi service?
Opened
#100 Question: unused Pin's
Opened
#101 After the update mine no longer works.
Opened
#102 Question: restore from config file
Opened
#103 Switch between battery and USB
Opened
#104 Add support for PAT
Opened
#105 Add support for YAAC
Opened
#106 Add Support / Documentation for WOAD on Android
Opened
#107 Support for Lillygo Ver1 boards
Opened
#108 iGate relaying Lora APRS tracker positions to RF
Opened
#109 Fix for iGate never returning from Auto AP
Opened
#110 iGate on SSID-11 won't beacon via KISS over IP set to same SSID as iGate
Opened
#111 [Feature Request] Option to send battery voltage as telemetry data
Opened
#112 Add support for ANDFLmsg
Opened
#113 Callsign does not pass validation.
Opened
#114 [Feature Request]Print WiFi MAC address at boot
Opened
#115 Add support for Meshtastic-DIY board
Opened
#116 Wheater data rainfall
Opened
#117 no feeedback when invalid passcode
Opened
#118 No longer able to ping device
Opened
#119 More issues with Wifi AutoAP
Opened
#120 Error when trying to OTA update
Opened
#121 Web Flasher for Trackers?
Opened
#122 Heltec Lora V3 entering sleep on boot with voltage present
Opened
#123 Support for LLCC68
Opened
#124 feature request: system time via ntp
Opened
#125 feature request: transmitting objects
Opened
#126 Suggest adding iGate Digipeater symbol to UI
Opened
#127 Heltec Lora 32 V3 Display problem
Opened
#128 Heltec Lora 32 V3 Display Timeout
Opened
#129 Feature request: Headless iGate (without OLED display)
Opened
#130 HELTEC Wireless Stick No Display
Opened
#131 External Voltage Measurement Heltec Wireless LoRa V3
Opened
#132 Calculate a proper IAQ when BME680 is in use
Opened
#133 Public syslog server + signal tracking web page / API
Opened
#134 Add watchdog timer function for a more robust firmware
Opened
#135 voltage as telemetry - logic bugs
Opened
#136 Disable the GPS module on ttgo-t-beam-v1
Opened
#137 Portable iGate: How to use the internal GPS of T-Beam
Opened
#138 Feature request: Headless iGate (without OLED display) #173
Opened
#139 Just a small TYPO ...
Opened
#140 No more connect to APRS-server possible
Opened
#141 Feature Request: Add CallSign and Timestamp to Backup Filename + JSON Formatting
Opened
#142 Question: which format/encoding is used for sending data on LoRA?
Opened
#143 TX on wrong frequency
Opened
#144 Web page: Can't delete WiFi network
Opened
#145 Internal voltage level controll
Opened
#146 Error pinout for "ESP32+LoRa SX1278" board
Opened
#147 Heltec Lora 32 V2 LCD not working
Opened
#148 TX RX frequency parameter
Opened
#149 Variant heltec_wireless_tracker_v1.1
Opened
#150 Question: How do I setup 2024.11.06 for digi only?
Opened
#151 igate not reconnecting to Wi-Fi after wake from sleep
Opened
#152 No display on the Heltec wireless paper
Opened
#153 incorrectly decoded gps coordinates from some packets in syslog
Opened
#154 Heltec Esp32 V3 TX non stop
Opened
#155 Igate on Lilygo T Beam Supreme
Opened
#156 Eco Mode exit for HT-CT62 not working
Opened
#157 How to disable auto connection to WiFi?
Opened
#158 Is it possible to set a different TX and RX frequency as Digirepeater
Opened
#159 LILYGO T3 TCXO - New board
Opened
#160 Invalid TX packet
Opened
#161 Feature Request: Add Minutes to GMT Time Correction Option
Opened
#162 When voltage telemetry and wx telemetry are enabled, neither of them works
Opened
#163 A lot of CRC ERROR
Opened
#164 too fast(?) reboot after restoring from backup
Opened
#165 Igate/Repeater in repeater ony mode does not send beacon
Opened
#166 Heltec Lora32 new revision V3.2
Opened
#167 aprs
Opened
#168 Eco Mode - How to?
Opened
#169 Heltec V3.2
Opened
#170 APRS raw packets display and battery percentage stuck.
Opened
#171 MESHCOM 4.0 MODE no PACKET RX
Opened
#172 Circuit for ESP32 and Lora module connection?
Opened
#173 freeze on lora power 1
Opened
#174 TTGO T-A7670 E board - No Internet connection via LTE
Opened
#175 Static IP Adress
Opened
#176 APRS-IS filter activation
Opened
#177 OLED time out activation
Opened
#178 T-beam versions - AXP192 is replaced by an AXP2101. And sending temperature in degrees of Celsius.
Opened
#179 One-Wire e.g. DS18B20 Sensor ?
Opened
#180 Ethernet / POE
Opened
#181 igate 433mhz v2025.01.22 on Heltec v3 doesn't send information to aprs from other trackers/stations.
Opened
#182 Barometer altitude from GPS
Opened
#183 Voltage telemetry sending - what's the conditions?
Opened
#184 Enable APRS-IS connection iusse
Opened
#185 iGate as serial KISS TNC for PinPoint APRS
Opened
#186 Add option to enable wifi AP with a button when in Eco mode
Opened
#187 what is /dev/tty* for KISS TNC LoRa IGate?
Opened
#188 Blacklist not working as expected
Opened
#189 SenseCap Card Tracker Support
Opened
#190 LoRa iGate Received Packets refresh intermittent or not populating
Opened
#191 Can't seem to connect to Wifi that doesn't use password
Opened
#192 Primary symbols not configurable
Opened
#193 Change Request: GMT Time Correction Option
Opened
#194 Manager's call upper case
Opened
#195 feature request - received Packets display of the date
Opened
#196 alternative WX data source
Opened
#197 Feature request: NTP server customization
Opened
#198 Impossible to change a map icon - version 2025.03.20
Opened
#199 Not showing on map @ https://lora-aprs.live
Opened
#200 No field control on callsign
Opened
#201 Version 3 iGate firmware - error with negative longitude
Opened
#202 Error opening serial port - YAAC
Opened
#203 Version 3 and WX sensor support in Ultra ECO mode
Opened
#204 add support to ina219/ina3221
Opened
#205 T-Beam Supreme V3 Corrupt Display
Opened
#206 Automatic power on
Opened
#207 Igate Will not connect to wifi extender
Opened
#208 Multiple SYSLOG servers
Opened
#209 433 MHz Heltec V3 Output Power
Opened
#210 T-DECK PLUS NO KEYBOARD ERROR
Opened
#211 Heltec Wireless Bridge
Opened
#212 Heltec V3.2 not receiving packets
Opened
#213 QRP-LABS LightGateway Plus (Solar) 1.0 solar voltage input pin?
Opened
#214 Feature Request: RAK13800 WisBlock Ethernet Module support
Opened
#215 Feature request: Show DATE in LAST 10 RECEIVED PACKETS LIST
Opened
#216 Possible new WebUI configuration bug in version 25-09-09:
Opened
#217 display stays "connected!!, loading..."
Opened
#218 Send altitude in an APRS-standard format
Opened
#219 Issue reporting negative elevations
Opened
#220 Problems updating iGate from version 3.0 to 3.1.2 via OTA
Opened
#221 Possible leading zero bug for Callsign designations.
Opened
#222 Propose to change LoRa configurations from Country Abbreviation to "MODE"
Opened
#223 Beaconing: get GPS position from a local UDP NMEA0183 stream
Opened
#224 LILYGO ® Ttgo loRa32 v2.1_1.6 - VHF 144 188 MHz
Opened
#225 Frames received from TNC client not transmitted to APRS-IS
Opened
#226 NTP not working on V3.1.3
Opened
#227 OTA updates not working on Heltec V3.2
Opened
#228 Send beacon over MQTT
Opened
#229 QRPLabs LightGateway Plus (Solar) 1.0 reboot loop at startup when unable to find programmed network
Opened
#230 PDF con error
Opened
#231 Heltec Wireless Paper 1.2 version
Opened
#232 NTP GMT correction
Opened
#233 APRS Message/Queries - The LilyGO T-Deck appears to have no "equal" "=" symbol key available?
Opened
#234 Weather data displaying
Opened
#235 Core 1 panic'ed
Opened
#236 BMP280 + AHT20
Opened
#237 No display on Heltec V3
Opened
#238 Battery timer?
Opened
#239 Send Status every XXXX minutes
Opened
#240 Difference in I2C usage between boards
Opened
#241 update OTA
Opened
#242 T-Beam problem
Opened
#243 Specify IS server
Opened
#244 Beacon time
Opened
#245 Command ?APRSSR doesn't work reliably
Opened
#246 Improved interface with T-Deck plus
Opened
#247 BME280
Opened
#248 No Screen Heltec V3
Opened
#249 Digipeating issue ...
Opened
#250 Add explanations to the beacon symbol selection field
Opened
#251 Heltec Wireless stick lite V3 (433Mhz) wont connect to Wi-Fi after saving setting. wont start own AP as well.
Opened
#252 Wiki add (LoRa APRS iGate CA2RXU Firmware Manual)
Opened
#253 ?APRSP --> 2 or 3 decimals?
Opened
#254 Allow "Beacon Comment" to send at an interval, not every time
Opened
#255 OTA update not working
Opened
#256 Link to PDF manual on Wiki page not working
Opened
#257 Display stays dark on Heltec Wireless Tracker v1.2
Opened
#258 Won't upload APRS spots
Opened
#259 Is it possible to have no Beacon Path
Opened
#260 V_ext problem in the latest version (Heltec WSL)
Opened
#261 LilyGo Display Not Timing Out
Opened
#262 WEBUI needs to show current time.
Opened
#263 Bug in LILYGO LORA32 433MHz ESP32 GPS?
Opened
#264 Firmware 3.2.3 not work APRS
Opened
#265 Using USB or Bluetooth to connect KISS
Opened
#266 GPS (DIY) problem
Opened
#267 Can't start Wi-Fi mode on t114 tracker
Opened
#268 E22-400M30S (SX1268) - sensitivity of the receiver, AGC?
Opened
#269 request Ra-01SC-P
Opened
#270 Unexpected issue with Ultra Eco Mode on the HSL board
Opened
#271 Dedicated power for beacon
Opened
#272 [REQUEST] Cross-Frequency Digi -> Digipeat Messages on RX frequency
Opened
#273 Please add Send beacon via APRS-IS and Send beacon via RF on different times.
Opened
#274 LilyGo T-Beam Supreme V3.0 OLED Doesn't Work
Opened
#275 APRS-IS Filter filter not working
Opened
#276 LilyGo T-Beam 1W 433 MHz not working
Opened
#277 TTGO T-Beam V1.0 , V1.1, V1.2 (also variations with SX1262 and SX1268 LoRa Modules) and Supreme V3.
Opened
#278 Heltec HT-CT62 board: invalid header: Oxffffffff
Opened
#279 Heltec V3.2 very dim display.
Opened
#280 Lylgo T-Echo Lite
Opened
#281 [WiFi] Display warning message on screen if the WiFi password is invalid
Opened
#282 No WX with RAK 4631+19003 base
Opened
#283 Digipeater emits malformed path with a double asterisk (CALL**) in WIDE2-n mode
Opened
#284 Heltec V3.2 does not sent telemetry and gps possition to APRS-FI
Opened
#285 Disabling AutoAP with no SSID configured causes a boot loop (lwip assert in WEB_Utils::setup)
Opened
#286 Station status information not available from device other than APRS
Opened
#287 Time zone offsets are not only by hours worldwide
Opened
#288 Tactical Callsign Is Not Being Passed to APRS Network
Opened
#289 RAK4631 Digipeater v.4.0.0 uploader of firmware issue
Opened
#290 Link WiFi SSID with Location
Opened
#291 iGate - Not sending received APRS packets to APRS server
Opened
#292 Dynamic APRS-IS Friend Filters for Recently Heard LoRa Stations Summary
Opened
#293 Add ESP32-C3 SuperMini + LoRa SX1278 (RA-01/RA-02) board variant with I2C telemetry
Opened
#294 RF-to-APRS-IS path does not suppress locally repeated packets
Opened
#295 Not sure if its my device or not
Opened
#296 Wiki needs improvement for connecting BME280
Opened
#297 support for SH1106 1.3" OLED displays
Opened
#298 iGate Firmware 4.0.4 / T-Beam 1W / Power setting max 22dBm
Opened
#299 CAD setting not respected
Opened
#300 How to build for RAK4631?