adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-11-03 04:02:20 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

Web page: BATTERY section layout - group Internal and external voltage options #98

New Issue
Closed
opened 2026-10-05 05:36:02 +02:00 by adam · 5 comments
adam commented 2026-10-05 05:36:02 +02:00
Owner
Copy link
Copy source

I'd like to ask you about group this options as my example if no problem of course.
I'm sorry for ms paint ;)

Current layout:
image

My two proposal layouts:
Battery

I'd like to ask you about group this options as my example if no problem of course. I'm sorry for ms paint ;) **Current layout:** ![image](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/f79e1fba-ca09-416c-a7d6-04ff6565c53b) **My two proposal layouts:** ![Battery](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/cf7c9d3b-5c74-4b91-97e0-d0dbcfda83ba) <!-- github-sync-id:2379325335 -->
adam closed this issue 2026-10-05 05:36:02 +02:00
adam commented 2026-10-05 05:36:03 +02:00
Author
Owner
Copy link
Copy source

Check how it's now and let me know

Check how it's now and let me know <!-- github-comment-id:2196016941 -->
adam commented 2026-10-05 05:36:04 +02:00
Author
Owner
Copy link
Copy source

I see the last build from 2024.06.25. I have stupid question: I didn't understand if I should wait for the next release or compile on my own from sources and confirm if that's what I meant?

image

Regards

HF5F | Pawel | Poland

I see the last build from 2024.06.25. I have stupid question: I didn't understand if I should wait for the next release or compile on my own from sources and confirm if that's what I meant? ![image](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/760f7b0b-df62-4749-93d6-0591ec2a8870) Regards --- HF5F | Pawel | Poland <!-- github-comment-id:2196277226 -->
adam commented 2026-10-05 05:36:05 +02:00
Author
Owner
Copy link
Copy source

this was meant for you to compile and upload from VSCODE with github new info as I have to build the process to update the web installer still

and I always give a few days of tries before this to validate all with more users if available

this was meant for you to compile and upload from VSCODE with github new info as I have to build the process to update the web installer still and I always give a few days of tries before this to validate all with more users if available <!-- github-comment-id:2196947196 -->
adam commented 2026-10-05 05:36:05 +02:00
Author
Owner
Copy link
Copy source

Sure. I'll be compiling and testing over the weekend (same as issue #123).

Sure. I'll be compiling and testing over the weekend (same as issue #123). <!-- github-comment-id:2196963629 -->
adam commented 2026-10-05 05:36:06 +02:00
Author
Owner
Copy link
Copy source

It looks very cool. The divider configuration I was just about to report to you, so you read my mind well.
image

Q1: I see that some of my colleagues who want to use your software have no technical knowledge. They won't know where R1 and R2 are - I suggest adding a schematic. Ideally, you should put a pin configuration box next to the place on the schematic where it is drawn.

Q2: Not all pins on the board are analog and cannot measure voltage. Maybe find a common part of the pins to select from the supported boards and only allow those to be selected from the list?

Q3: Is pin 35 reserved? It is analog and unfortunately after configuring it did not show anything. I found this but did not analyze all the code.
image

Q4: Could Monitor External Voltage Health start 1 minute after startup? This is probably my case from #123 - after accidentally turning it on, the only option is to reload the firmware or connect the voltage source to the pin that was configured - user have to remember what configured.

Meybe as this?
image

It looks very cool. The divider configuration I was just about to report to you, so you read my mind well. ![image](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/7f98d103-6c69-4521-ae05-fbe91b9bed0e) Q1: I see that some of my colleagues who want to use your software have no technical knowledge. They won't know where R1 and R2 are - I suggest adding a schematic. Ideally, you should put a pin configuration box next to the place on the schematic where it is drawn. Q2: Not all pins on the board are analog and cannot measure voltage. Maybe find a common part of the pins to select from the supported boards and only allow those to be selected from the list? Q3: Is pin 35 reserved? It is analog and unfortunately after configuring it did not show anything. I found this but did not analyze all the code. ![image](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/6886d4f4-b6e0-4f13-92aa-bc5732db272e) Q4: Could Monitor External Voltage Health start 1 minute after startup? This is probably my case from #123 - after accidentally turning it on, the only option is to reload the firmware or connect the voltage source to the pin that was configured - user have to remember what configured. Meybe as this? ![image](https://github.com/richonguzman/LoRa_APRS_iGate/assets/161824071/316f047c-613e-467b-ada1-86fc9c7a4688) <!-- github-comment-id:2198500318 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#98