adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-10-31 02:51:58 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

One-Wire e.g. DS18B20 Sensor ? #179

New Issue
Open
opened 2026-10-05 05:46:00 +02:00 by adam · 8 comments
adam commented 2026-10-05 05:46:00 +02:00
Owner
Copy link
Copy source

Is it possible adding one-wire sensor e.g e.g. DS18B20? will use a waterresistant Temperature Probe
tnx any info
Herbert dl4sdr

Is it possible adding one-wire sensor e.g e.g. DS18B20? will use a waterresistant Temperature Probe tnx any info Herbert dl4sdr <!-- github-sync-id:2818190644 -->
adam commented 2026-10-05 05:46:01 +02:00
Author
Owner
Copy link
Copy source

Hi Herbert,

besides adding this sensor, what is the intended goal beside getting T° info? send it as a comment? as Telemetry?

Hi Herbert, besides adding this sensor, what is the intended goal beside getting T° info? send it as a comment? as Telemetry? <!-- github-comment-id:2623148577 -->
adam commented 2026-10-05 05:46:01 +02:00
Author
Owner
Copy link
Copy source

Hallo Ricardo,

if possible Telemetry. 73

Hallo Ricardo, if possible Telemetry. 73 <!-- github-comment-id:2623660003 -->
adam commented 2026-10-05 05:46:02 +02:00
Author
Owner
Copy link
Copy source

Ok

But WX telemetry or generic telemetry?

Ok But WX telemetry or generic telemetry? <!-- github-comment-id:2623663707 -->
adam commented 2026-10-05 05:46:03 +02:00
Author
Owner
Copy link
Copy source

GM es sri.......WX please....mni tnx

GM es sri.......WX please....mni tnx <!-- github-comment-id:2623676515 -->
adam commented 2026-10-05 05:46:04 +02:00
Author
Owner
Copy link
Copy source

will search a way to add this too

will search a way to add this too <!-- github-comment-id:2624820263 -->
adam commented 2026-10-05 05:46:04 +02:00
Author
Owner
Copy link
Copy source

I'd prefer the temp sensor be part of general telemetry, as I have concerns about battery temperature. Ricardo, is there a way to allow the temperature to be selectable as wx or as general tlm? Also, I'd prefer temp in degrees C, since battery ratings are primarily specified in C

I'd prefer the temp sensor be part of general telemetry, as I have concerns about battery temperature. Ricardo, is there a way to allow the temperature to be selectable as wx or as general tlm? Also, I'd prefer temp in degrees C, since battery ratings are primarily specified in C <!-- github-comment-id:2744088559 -->
adam commented 2026-10-05 05:46:05 +02:00
Author
Owner
Copy link
Copy source

I'm returning to see how to do this... I was thinking this could be used in a encoded telemetry packet instead of the regular WX packet.

I'm returning to see how to do this... I was thinking this could be used in a encoded telemetry packet instead of the regular WX packet. <!-- github-comment-id:2744130773 -->
adam commented 2026-10-05 05:46:06 +02:00
Author
Owner
Copy link
Copy source

#241 Here I also wrote about the possibility to show the temperature in C in the comment (my wish). And there is also an issue ( I can't find it) where we discussed the modes of sending Igate beacon with connected BME280 sensor (beacon with WX data) and the voltage as telemetry packet at the same time (why not). And the possibility to send both voltage and temperature in one telemetry packet (Bme280 or DS18B20 - both send raw data in C)...

And one more question: Has anyone considered supporting SHT11 sensors? I know it doesn't use standard I2C, but the Sensibus protocol. But these sensors are also used and are quite accurate.

#241 Here I also wrote about the possibility to show the temperature in C in the comment (my wish). And there is also an issue ( I can't find it) where we discussed the modes of sending Igate beacon with connected BME280 sensor (beacon with WX data) and the voltage as telemetry packet at the same time (why not). And the possibility to send both voltage and temperature in one telemetry packet (Bme280 or DS18B20 - both send raw data in C)... And one more question: Has anyone considered supporting SHT11 sensors? I know it doesn't use standard I2C, but the Sensibus protocol. But these sensors are also used and are quite accurate. <!-- github-comment-id:2746060393 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#179