LilyGo T-Beam 1W 433 MHz not working #276

Closed
opened 2026-10-05 05:56:32 +02:00 by adam · 4 comments
Owner

I'm using a LilyGo T-Beam 1W 433 MHz with the following board specification:

start detect chip...please wait
chip sync ...
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: Wi-Fi, BT 5 (LE), Dual Core + LP Core, 240MHz, Embedded PSRAM 8MB (AP_3v3)
Crystal is 40MHz
MAC: 441bf6964940
Manufacturer: 46
Device: 4018
Status value: 0x200200
Detected flash size: 16MB

I can't load the Tracker firmware. The board will not accept any firmware version i tried.

Furthermore, I would like to use the T-Beam 1W as an i-Gate.
Any chance to get an i-Gate firmwware for the above board?

vy 73 de Angelo, DM1AC

I'm using a LilyGo T-Beam 1W 433 MHz with the following board specification: start detect chip...please wait chip sync ... Chip is ESP32-S3 (QFN56) (revision v0.2) Features: Wi-Fi, BT 5 (LE), Dual Core + LP Core, 240MHz, Embedded PSRAM 8MB (AP_3v3) Crystal is 40MHz MAC: 441bf6964940 Manufacturer: 46 Device: 4018 Status value: 0x200200 Detected flash size: 16MB I can't load the Tracker firmware. The board will not accept any firmware version i tried. Furthermore, I would like to use the T-Beam 1W as an i-Gate. Any chance to get an i-Gate firmwware for the above board? vy 73 de Angelo, DM1AC <!-- github-sync-id:4513022890 -->
adam closed this issue 2026-10-05 05:56:32 +02:00
Author
Owner
https://github.com/richonguzman/LoRa_APRS_Tracker/issues/367#issuecomment-4557584811 <!-- github-comment-id:4558709494 -->
Author
Owner

JerzyG84
Many thanks for your answer. I was able to flash the LilyGo T-Beam 1W as Tracker with VSCode and all runs fine.
But I would like to use the T-Beam as an i-Gate.
When using
[platformio]
default_envs = ttgo-t-beam-1W
VSCode shows an error that "ttgo-t-beam-1W" is not a valid option.
Any chance to help in this matter?

JerzyG84 Many thanks for your answer. I was able to flash the LilyGo T-Beam 1W as Tracker with VSCode and all runs fine. But I would like to use the T-Beam as an i-Gate. When using [platformio] default_envs = ttgo-t-beam-1W VSCode shows an error that "ttgo-t-beam-1W" is not a valid option. Any chance to help in this matter? <!-- github-comment-id:4563417665 -->
Author
Owner

But I would like to use the T-Beam as an i-Gate. When using [platformio] default_envs = ttgo-t-beam-1W VSCode shows an error that "ttgo-t-beam-1W" is not a valid option. Any chance to help in this matter?

I can't help you with this, as far as I know, there is no iGate firmware for this hardware.
You must ask Ricardo about for it.

> But I would like to use the T-Beam as an i-Gate. When using [platformio] default_envs = ttgo-t-beam-1W VSCode shows an error that "ttgo-t-beam-1W" is not a valid option. Any chance to help in this matter? I can't help you with this, as far as I know, there is no iGate firmware for this hardware. You must ask Ricardo about for it. <!-- github-comment-id:4567578040 -->
Author
Owner

iGate version will come in a while. Solving the web installer problem with this board is the main target for now

iGate version will come in a while. Solving the web installer problem with this board is the main target for now <!-- github-comment-id:4594813183 -->
Sign in to join this conversation.
No labels
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#276