Heltec Lora 32 V3 Display Timeout #128

Closed
opened 2026-10-05 05:39:25 +02:00 by adam · 6 comments
Owner

Hoping to save power I set my display to switch off - but it remains on all the time.

Hoping to save power I set my display to switch off - but it remains on all the time. <!-- github-sync-id:2510437679 -->
adam closed this issue 2026-10-05 05:39:25 +02:00
Author
Owner

Not the solution to your problem, but to put some perspective on how much can we realistically gain by switching the OLED display off. Based on excellent measurements on https://bitbanksoftware.blogspot.com/2019/06/how-much-current-do-oled-displays-use.html , the 0.96" 128x64 monochrome OLED that we typically run on our Lora devices has an average consumption around 8mA at 3.3V. This translates to approx 2mA on a 12V solar system.

Is it really worth switching it off?

Edit: on this level of power saving we should look at the power consumption of various LEDs on the board, suddenly they aren't trivial anymore in comparison to the display.

Not the solution to your problem, but to put some perspective on how much can we realistically gain by switching the OLED display off. Based on excellent measurements on https://bitbanksoftware.blogspot.com/2019/06/how-much-current-do-oled-displays-use.html , the 0.96" 128x64 monochrome OLED that we typically run on our Lora devices has an average consumption around 8mA at 3.3V. This translates to approx 2mA on a 12V solar system. Is it really worth switching it off? Edit: on this level of power saving we should look at the power consumption of various LEDs on the board, suddenly they aren't trivial anymore in comparison to the display. <!-- github-comment-id:2334400832 -->
Author
Owner

This translates to approx 2mA on a 12V solar system.

The display feels warm to the touch - but maybe that's components inderneath it?

>This translates to approx 2mA on a 12V solar system. The display feels warm to the touch - but maybe that's components inderneath it? <!-- github-comment-id:2334409815 -->
Author
Owner

On your device the LoRa radio SX1262 is under the display.

On your device the LoRa radio SX1262 is under the display. <!-- github-comment-id:2334423645 -->
Author
Owner

i made a few mods to the igate firmware to solve some HELTEC V3 oled not working

please test if you can.

i made a few mods to the igate firmware to solve some HELTEC V3 oled not working please test if you can. <!-- github-comment-id:2341587827 -->
Author
Owner

Tested the latest igate firmware. The display is now back on (fixed) - thanks. The display and Wifi timeouts are not working at the moment.

Tested the latest igate firmware. The display is now back on (**fixed**) - thanks. The display and Wifi timeouts are not working at the moment. <!-- github-comment-id:2344073229 -->
Author
Owner

added a WIFI KILL Switch (on Wifi AP section of webUI config)

this is to kill Wifi and WifiAP completely from restart for pure Remote Digirepeater which should lower power comsumption a lot (as we need for this special cases)

please test it a comment

added a WIFI KILL Switch (on Wifi AP section of webUI config) this is to kill Wifi and WifiAP completely from restart for pure Remote Digirepeater which should lower power comsumption a lot (as we need for this special cases) please test it a comment <!-- github-comment-id:2395783820 -->
Sign in to join this conversation.
No labels
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#128