adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-11-03 12:12:20 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

Support for Lillygo Ver1 boards #107

New Issue
Closed
opened 2026-10-05 05:36:56 +02:00 by adam · 24 comments
adam commented 2026-10-05 05:36:56 +02:00
Owner
Copy link
Copy source

I have several LILYGO TTGO Ver1 boards which would could be utilised as I Gates, would it be possible to add support for these please?

I have several LILYGO TTGO Ver1 boards which would could be utilised as I Gates, would it be possible to add support for these please? <!-- github-sync-id:2421296222 -->
adam closed this issue 2026-10-05 05:36:56 +02:00
adam commented 2026-10-05 05:36:57 +02:00
Author
Owner
Copy link
Copy source

Are these boards v1.6??

Are these boards v1.6?? <!-- github-comment-id:2241618095 -->
adam commented 2026-10-05 05:36:57 +02:00
Author
Owner
Copy link
Copy source

The boards are version 1 boards exactly like this https://meshtastic.org/docs/hardware/devices/lora/?t-lora=v1

The OLED pin outs are different from the later versions of this board but the LoRa pin outs appear to be the same?

The boards are version 1 boards exactly like this https://meshtastic.org/docs/hardware/devices/lora/?t-lora=v1 The OLED pin outs are different from the later versions of this board but the LoRa pin outs appear to be the same? <!-- github-comment-id:2241627818 -->
adam commented 2026-10-05 05:36:58 +02:00
Author
Owner
Copy link
Copy source

So I will need your help to add this:

Can you provide the pinout list needed for this to work?

So I will need your help to add this: Can you provide the pinout list needed for this to work? <!-- github-comment-id:2241640897 -->
adam commented 2026-10-05 05:36:59 +02:00
Author
Owner
Copy link
Copy source

Jugué con 2 placas 868 Mhz de este modelo (ahora no los tengo a mano). Los pines OLED se corresponden al modelo de pines del "HELTEC_V2". Faltaría comprobar el pin de Batería para ver donde está.

En su día, lo programé como si fuera un "TGO_T_LORA32_V2_1_915" pero cambié en el código los pines OLED igual que el "HELTEC_V2". Todo funcionó bien, después me di cuenta que las lecturas de voltaje eran incorrectas, pero no le dediqué mas tiempo.

Jugué con 2 placas 868 Mhz de este modelo (ahora no los tengo a mano). Los pines OLED se corresponden al modelo de pines del "HELTEC_V2". Faltaría comprobar el pin de Batería para ver donde está. En su día, lo programé como si fuera un "TGO_T_LORA32_V2_1_915" pero cambié en el código los pines OLED igual que el "HELTEC_V2". Todo funcionó bien, después me di cuenta que las lecturas de voltaje eran incorrectas, pero no le dediqué mas tiempo. <!-- github-comment-id:2241641586 -->
adam commented 2026-10-05 05:37:00 +02:00
Author
Owner
Copy link
Copy source

Pero lo demás funciona con heltec v2 ?

Porque no intentas con Lora32_915?

Pero lo demás funciona con heltec v2 ? Porque no intentas con Lora32_915? <!-- github-comment-id:2241712726 -->
adam commented 2026-10-05 05:37:00 +02:00
Author
Owner
Copy link
Copy source

Here is the pin out diagram:-
lilygo ver1

Here is the pin out diagram:- ![lilygo ver1](https://github.com/user-attachments/assets/68a6f5c0-37cd-4e91-9eb9-af61240c7db6) <!-- github-comment-id:2241731283 -->
adam commented 2026-10-05 05:37:01 +02:00
Author
Owner
Copy link
Copy source

Pero lo demás funciona con heltec v2 ?

Porque no intentas con Lora32_915?

Buenas tardes,
De este modelo solo tengo uno para hacer pruebas (lo tenia escuchando satélites) y no tengo mas para 868 para poder testear al 100%.

Con "heltec-lora32-v2".

  • Inicia bien
  • Lectura de voltaje interno incorrecto, marca en el lcd 0.28v
  • Al cambiar las frecuencias a 868 se bloquea en la pantalla de inicio.

Con "Lora32_915" y TGO_T_LORA32_V2_1_915

  • Hay que cambiar la asignación de pines del LCD a 4, 15 y 16
  • La lectura de voltaje sigue dando 0.28v
  • No hay bloqueo al cambiar las frecuencias a 868 y puedo escuchar que emite las tramas con un sdr.

Sobre la lectura de la batería no encuentro información clara y he probado con todos los ADC por lo que imagino que esta placa no tiene divisor interno para la lectura.

> Pero lo demás funciona con heltec v2 ? > > Porque no intentas con Lora32_915? Buenas tardes, De este modelo solo tengo uno para hacer pruebas (lo tenia escuchando satélites) y no tengo mas para 868 para poder testear al 100%. Con "heltec-lora32-v2". - Inicia bien - Lectura de voltaje interno incorrecto, marca en el lcd 0.28v - Al cambiar las frecuencias a 868 se bloquea en la pantalla de inicio. Con "Lora32_915" y TGO_T_LORA32_V2_1_915 - Hay que cambiar la asignación de pines del LCD a 4, 15 y 16 - La lectura de voltaje sigue dando 0.28v - No hay bloqueo al cambiar las frecuencias a 868 y puedo escuchar que emite las tramas con un sdr. Sobre la lectura de la batería no encuentro información clara y he probado con todos los ADC por lo que imagino que esta placa no tiene divisor interno para la lectura. <!-- github-comment-id:2241788013 -->
adam commented 2026-10-05 05:37:02 +02:00
Author
Owner
Copy link
Copy source

there is not much info about the pinouts of V1.0

sadly its not recommended to use with battery in meshtastic at all

there is not much info about the pinouts of V1.0 sadly its not recommended to use with battery in meshtastic at all <!-- github-comment-id:2244170732 -->
adam commented 2026-10-05 05:37:02 +02:00
Author
Owner
Copy link
Copy source

This is the pin configuration from the Meshtatsic Github https://github.com/meshtastic/firmware/blob/master/variants/tlora_v1/variant.h

I have never used a battery on these devices as per recommendations and have only been powered by the USB port.

This is the pin configuration from the Meshtatsic Github https://github.com/meshtastic/firmware/blob/master/variants/tlora_v1/variant.h I have never used a battery on these devices as per recommendations and have only been powered by the USB port. <!-- github-comment-id:2244346353 -->
adam commented 2026-10-05 05:37:03 +02:00
Author
Owner
Copy link
Copy source

Hi,
It has been a while since anyone posted, has anyone had any more thoughts on adding support for this board for IGATE only, running off USB power supply?

Many thanks.

Hi, It has been a while since anyone posted, has anyone had any more thoughts on adding support for this board for IGATE only, running off USB power supply? Many thanks. <!-- github-comment-id:2394997880 -->
adam commented 2026-10-05 05:37:04 +02:00
Author
Owner
Copy link
Copy source

Hi, It has been a while since anyone posted, has anyone had any more thoughts on adding support for this board for IGATE only, running off USB power supply?

Many thanks.

could you help me out with all the pinout verification?

I cant find any info about this board to add it

> Hi, It has been a while since anyone posted, has anyone had any more thoughts on adding support for this board for IGATE only, running off USB power supply? > > Many thanks. could you help me out with all the pinout verification? I cant find any info about this board to add it <!-- github-comment-id:2395021332 -->
adam commented 2026-10-05 05:37:04 +02:00
Author
Owner
Copy link
Copy source

Does this help?
LILYGO LORA32 V1.0 Details

ESP32 0.96 Freq 886/915 Mhz

RADIO_SCLK_PIN 5 // GPIO5 - SX1276 SCK
RADIO_MISO_PIN 19 // GPIO19 - SX1276 MISO
RADIO_MOSI_PIN 27 // GPIO27 - SX1276 MOSI
RADIO_CS_PIN 18 // GPIO18 - SX1276 CS
RADIO_RST_PIN 14 // GPIO14 - SX1276 RST
RADIO_BUSY_PIN 26 // GPIO26 - SX1276 IRQ

OLED Details

Type SSD 1306

OLED_SDA 4
OLED_SCL 15
OLED_RST 16

Does this help? LILYGO LORA32 V1.0 Details ESP32 0.96 Freq 886/915 Mhz RADIO_SCLK_PIN 5 // GPIO5 - SX1276 SCK RADIO_MISO_PIN 19 // GPIO19 - SX1276 MISO RADIO_MOSI_PIN 27 // GPIO27 - SX1276 MOSI RADIO_CS_PIN 18 // GPIO18 - SX1276 CS RADIO_RST_PIN 14 // GPIO14 - SX1276 RST RADIO_BUSY_PIN 26 // GPIO26 - SX1276 IRQ OLED Details Type SSD 1306 OLED_SDA 4 OLED_SCL 15 OLED_RST 16 <!-- github-comment-id:2395123633 -->
adam commented 2026-10-05 05:37:05 +02:00
Author
Owner
Copy link
Copy source

It looks similar to the Heltec board.

It looks similar to the Heltec board. <!-- github-comment-id:2395123920 -->
adam commented 2026-10-05 05:37:05 +02:00
Author
Owner
Copy link
Copy source

It looks similar to the Heltec board.

Thats in respect to the pin outs.

> It looks similar to the Heltec board. Thats in respect to the pin outs. <!-- github-comment-id:2395399296 -->
adam commented 2026-10-05 05:37:06 +02:00
Author
Owner
Copy link
Copy source

I take this issue is still open

I take this issue is still open <!-- github-comment-id:2395399883 -->
adam commented 2026-10-05 05:37:07 +02:00
Author
Owner
Copy link
Copy source

Does this help? LILYGO LORA32 V1.0 Details

ESP32 0.96 Freq 886/915 Mhz

RADIO_SCLK_PIN 5 // GPIO5 - SX1276 SCK RADIO_MISO_PIN 19 // GPIO19 - SX1276 MISO RADIO_MOSI_PIN 27 // GPIO27 - SX1276 MOSI RADIO_CS_PIN 18 // GPIO18 - SX1276 CS RADIO_RST_PIN 14 // GPIO14 - SX1276 RST RADIO_BUSY_PIN 26 // GPIO26 - SX1276 IRQ

OLED Details

Type SSD 1306

OLED_SDA 4 OLED_SCL 15 OLED_RST 16

> Does this help? LILYGO LORA32 V1.0 Details > > ESP32 0.96 Freq 886/915 Mhz > > RADIO_SCLK_PIN 5 // GPIO5 - SX1276 SCK RADIO_MISO_PIN 19 // GPIO19 - SX1276 MISO RADIO_MOSI_PIN 27 // GPIO27 - SX1276 MOSI RADIO_CS_PIN 18 // GPIO18 - SX1276 CS RADIO_RST_PIN 14 // GPIO14 - SX1276 RST RADIO_BUSY_PIN 26 // GPIO26 - SX1276 IRQ > > OLED Details > > Type SSD 1306 > > OLED_SDA 4 OLED_SCL 15 OLED_RST 16 <!-- github-comment-id:2399864156 -->
adam commented 2026-10-05 05:37:07 +02:00
Author
Owner
Copy link
Copy source

Hi All,
I have now managed to get the board working as an Igate, all appears to be working except I am unable to get the OLED display working. Has anyone got any ideas why this does not work with this firmware, I am using ports
OLED_SDA 4
OLED_SCL 15
OLED_RST 16

Many thanks.

Hi All, I have now managed to get the board working as an Igate, all appears to be working except I am unable to get the OLED display working. Has anyone got any ideas why this does not work with this firmware, I am using ports OLED_SDA 4 OLED_SCL 15 OLED_RST 16 Many thanks. <!-- github-comment-id:2399865930 -->
adam commented 2026-10-05 05:37:08 +02:00
Author
Owner
Copy link
Copy source

just as a test, there is in /src/display.cpp , line 24 a :

#if defined(HELTEC_V3) || defined(HELTEC_WS) #define OLED_DISPLAY_HAS_RST_PIN #endif

maybe add to it " || defined(YourBoardsDefinitionName)"

so that it may need the RST pin to be managed

just as a test, there is in /src/display.cpp , line 24 a : `#if defined(HELTEC_V3) || defined(HELTEC_WS) #define OLED_DISPLAY_HAS_RST_PIN #endif` maybe add to it " || defined(YourBoardsDefinitionName)" so that it may need the RST pin to be managed <!-- github-comment-id:2399884968 -->
adam commented 2026-10-05 05:37:09 +02:00
Author
Owner
Copy link
Copy source

I have added that to the display.cpp and re-flashed the board, unfortunately it is still the same, I must be missing something? You are correct in your diagnosis as I have had a look at other coding with this board version and it shows a similar reset sequence for the OLED board.

I have added that to the display.cpp and re-flashed the board, unfortunately it is still the same, I must be missing something? You are correct in your diagnosis as I have had a look at other coding with this board version and it shows a similar reset sequence for the OLED board. <!-- github-comment-id:2400209769 -->
adam commented 2026-10-05 05:37:09 +02:00
Author
Owner
Copy link
Copy source

I have added that to the display.cpp and re-flashed the board, unfortunately it is still the same, I must be missing something? You are correct in your diagnosis as I have had a look at other coding with this board version and it shows a similar reset sequence for the OLED board.

show please how you added this

> I have added that to the display.cpp and re-flashed the board, unfortunately it is still the same, I must be missing something? You are correct in your diagnosis as I have had a look at other coding with this board version and it shows a similar reset sequence for the OLED board. show please how you added this <!-- github-comment-id:2400307842 -->
adam commented 2026-10-05 05:37:10 +02:00
Author
Owner
Copy link
Copy source

Buenas tardes,
Por si sirve de interés, a mi en la versión actual tampoco enciende la pantalla.
Con la build "2024-10-08" que tenía guardada de la última vez que lo probé, enciende bien. Solo cambié los pines.

foto

Buenas tardes, Por si sirve de interés, a mi en la versión actual tampoco enciende la pantalla. Con la build "2024-10-08" que tenía guardada de la última vez que lo probé, enciende bien. Solo cambié los pines. ![foto](https://github.com/user-attachments/assets/59611488-21e0-412b-91ea-7c61a5a9cc65) <!-- github-comment-id:2400354698 -->
adam commented 2026-10-05 05:37:11 +02:00
Author
Owner
Copy link
Copy source

Still no further forward ..... will try again with a new build.

Still no further forward ..... will try again with a new build. <!-- github-comment-id:2400535660 -->
adam commented 2026-10-05 05:37:11 +02:00
Author
Owner
Copy link
Copy source

Buenas tardes, Por si sirve de interés, a mi en la versión actual tampoco enciende la pantalla. Con la build "2024-10-08" que tenía guardada de la última vez que lo probé, enciende bien. Solo cambié los pines.

foto

cuentame, ahora si te funciono? para estar atento a hacer las modificaciones necesarias

> Buenas tardes, Por si sirve de interés, a mi en la versión actual tampoco enciende la pantalla. Con la build "2024-10-08" que tenía guardada de la última vez que lo probé, enciende bien. Solo cambié los pines. > > ![foto](https://private-user-images.githubusercontent.com/31318417/374649106-59611488-21e0-412b-91ea-7c61a5a9cc65.jpg?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.s-gPSuL214JskYDFUB_6lEP9YOK4hyWEsFau6dms8v0) cuentame, ahora si te funciono? para estar atento a hacer las modificaciones necesarias <!-- github-comment-id:2400552588 -->
adam commented 2026-10-05 05:37:12 +02:00
Author
Owner
Copy link
Copy source

These are my modifications:-

platformio.ini

default_envs = ttgo-lora32-v21_915

Display.cpp

ifdef HAS_DISPLAY
#ifdef HAS_TFT
#include <TFT_eSPI.h>

    TFT_eSPI tft = TFT_eSPI(); 

    #ifdef HELTEC_WIRELESS_TRACKER
        #define bigSizeFont     2.5
        #define smallSizeFont   1.5
        #define lineSpacing     12
    #endif
#else
    #if HAS_EPAPER
        //
    #else
        #include <Adafruit_GFX.h>
        #include <Adafruit_SSD1306.h>
        #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(TGO_T_LORA32_V2_1_915)
            #define OLED_DISPLAY_HAS_RST_PIN
        #endif
        #ifdef HELTEC_WSL_V3_DISPLAY
            Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST);
        #else
            Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
        #endif
    #endif

boards_pinout.h

#endif// LORA MODULES

#if defined(TTGO_T_LORA32_V2_1) || defined(HELTEC_V2) || defined(ESP32_DIY_LoRa) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0_915)
#define RADIO_SCLK_PIN 5 // GPIO5 - SX1278 SCK
#define RADIO_MISO_PIN 19 // GPIO19 - SX1278 MISO
#define RADIO_MOSI_PIN 27 // GPIO27 - SX1278 MOSI
#define RADIO_CS_PIN 18 // GPIO18 - SX1278 CS ---> NSS
#define RADIO_RST_PIN 14 // GPIO14 - SX1278 RST
#define RADIO_BUSY_PIN 26 // GPIO26 - SX1278 IRQ ---->DIO0
#endif

// OLED
#if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
#define OLED_SDA 4
#define OLED_SCL 15
#define OLED_RST 16 // Reset pin # (or -1 if sharing Arduino reset pin)
#endif

These are my modifications:- **platformio.ini** default_envs = ttgo-lora32-v21_915 **Display.cpp** ifdef HAS_DISPLAY #ifdef HAS_TFT #include <TFT_eSPI.h> TFT_eSPI tft = TFT_eSPI(); #ifdef HELTEC_WIRELESS_TRACKER #define bigSizeFont 2.5 #define smallSizeFont 1.5 #define lineSpacing 12 #endif #else #if HAS_EPAPER // #else #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(TGO_T_LORA32_V2_1_915) #define OLED_DISPLAY_HAS_RST_PIN #endif #ifdef HELTEC_WSL_V3_DISPLAY Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST); #else Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST); #endif #endif **boards_pinout.h** #endif// LORA MODULES #if defined(TTGO_T_LORA32_V2_1) || defined(HELTEC_V2) || defined(ESP32_DIY_LoRa) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0_915) #define RADIO_SCLK_PIN 5 // GPIO5 - SX1278 SCK #define RADIO_MISO_PIN 19 // GPIO19 - SX1278 MISO #define RADIO_MOSI_PIN 27 // GPIO27 - SX1278 MOSI #define RADIO_CS_PIN 18 // GPIO18 - SX1278 CS ---> NSS #define RADIO_RST_PIN 14 // GPIO14 - SX1278 RST #define RADIO_BUSY_PIN 26 // GPIO26 - SX1278 IRQ ---->DIO0 #endif // OLED #if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2) #define OLED_SDA 4 #define OLED_SCL 15 #define OLED_RST 16 // Reset pin # (or -1 if sharing Arduino reset pin) #endif <!-- github-comment-id:2401642633 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#107