adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-10-31 02:51:58 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

Problems updating iGate from version 3.0 to 3.1.2 via OTA #220

New Issue
Closed
opened 2026-10-05 05:51:07 +02:00 by adam · 6 comments
adam commented 2026-10-05 05:51:07 +02:00
Owner
Copy link
Copy source

I had to upload the new firmware twice via OTA for it to be recognized. All the parameters seemed to be correct, but when I went to configure the new MQTT functionality, the board reset and reverted to a blank state (N0CALL-10, AP mode).

I tried several times, but always with the same result, as if the saved values ​​were causing a reset.

I reinstalled version 3.0 (June) via OTA, but I'm still having problems. Sometimes, by chance, when saving some values, others are deleted.

It feels like I'm working on the wrong memory areas.
It's important for me to work via OTA to update remote systems.

Am I the only one experiencing this incorrect behavior?
Thanks. 73

David IK5XMK

I had to upload the new firmware twice via OTA for it to be recognized. All the parameters seemed to be correct, but when I went to configure the new MQTT functionality, the board reset and reverted to a blank state (N0CALL-10, AP mode). I tried several times, but always with the same result, as if the saved values ​​were causing a reset. I reinstalled version 3.0 (June) via OTA, but I'm still having problems. Sometimes, by chance, when saving some values, others are deleted. It feels like I'm working on the wrong memory areas. It's important for me to work via OTA to update remote systems. Am I the only one experiencing this incorrect behavior? Thanks. 73 David IK5XMK <!-- github-sync-id:3458188250 -->
adam closed this issue 2026-10-05 05:51:07 +02:00
adam commented 2026-10-05 05:51:08 +02:00
Author
Owner
Copy link
Copy source

could you test with just all the data without mqtt?

what are your mqtt settings ?

could you test with just all the data without mqtt? what are your mqtt settings ? <!-- github-comment-id:3339337912 -->
adam commented 2026-10-05 05:51:09 +02:00
Author
Owner
Copy link
Copy source

mqtt is irrelevant, I also tried leaving the mqtt section unchanged and
trying only to operate on the usual values, but at every save something
saves and something deletes

Il giorno ven 26 set 2025 alle ore 17:56 Ricardo Guzman (Richonguzman) <
@.***> ha scritto:

richonguzman left a comment (richonguzman/LoRa_APRS_iGate#329)
https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339337912

could you test with just all the data without mqtt?

what are your mqtt settings ?

—
Reply to this email directly, view it on GitHub
https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339337912,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AEVZNEKRWSJZDAFTMIMBOCT3UVOZLAVCNFSM6AAAAACHTIFC6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMZZGMZTOOJRGI
.
You are receiving this because you authored the thread.Message ID:
@.***>

mqtt is irrelevant, I also tried leaving the mqtt section unchanged and trying only to operate on the usual values, but at every save something saves and something deletes Il giorno ven 26 set 2025 alle ore 17:56 Ricardo Guzman (Richonguzman) < ***@***.***> ha scritto: > *richonguzman* left a comment (richonguzman/LoRa_APRS_iGate#329) > <https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339337912> > > could you test with just all the data without mqtt? > > what are your mqtt settings ? > > — > Reply to this email directly, view it on GitHub > <https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339337912>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AEVZNEKRWSJZDAFTMIMBOCT3UVOZLAVCNFSM6AAAAACHTIFC6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMZZGMZTOOJRGI> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> > <!-- github-comment-id:3339426713 -->
adam commented 2026-10-05 05:51:10 +02:00
Author
Owner
Copy link
Copy source

which board? what are the values?... can you share the configuration.json ?

which board? what are the values?... can you share the configuration.json ? <!-- github-comment-id:3339435121 -->
adam commented 2026-10-05 05:51:11 +02:00
Author
Owner
Copy link
Copy source

lilygo tbeam 1.2

3.1.2 tested with new installation/new board (erasing all) and all is ok

i'll try as soon as possible an update via OTA again to share json

thank you

Il giorno ven 26 set 2025 alle ore 18:17 Ricardo Guzman (Richonguzman) <
@.***> ha scritto:

richonguzman left a comment (richonguzman/LoRa_APRS_iGate#329)
https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339435121

which board? what are the values?... can you share the configuration.json ?

—
Reply to this email directly, view it on GitHub
https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339435121,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AEVZNEMSEESYBPYCKGREPSD3UVRJNAVCNFSM6AAAAACHTIFC6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMZZGQZTKMJSGE
.
You are receiving this because you authored the thread.Message ID:
@.***>

lilygo tbeam 1.2 3.1.2 tested with new installation/new board (erasing all) and all is ok i'll try as soon as possible an update via OTA again to share json thank you Il giorno ven 26 set 2025 alle ore 18:17 Ricardo Guzman (Richonguzman) < ***@***.***> ha scritto: > *richonguzman* left a comment (richonguzman/LoRa_APRS_iGate#329) > <https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339435121> > > which board? what are the values?... can you share the configuration.json ? > > — > Reply to this email directly, view it on GitHub > <https://github.com/richonguzman/LoRa_APRS_iGate/issues/329#issuecomment-3339435121>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AEVZNEMSEESYBPYCKGREPSD3UVRJNAVCNFSM6AAAAACHTIFC6WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTGMZZGQZTKMJSGE> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> > <!-- github-comment-id:3339540480 -->
adam commented 2026-10-05 05:51:11 +02:00
Author
Owner
Copy link
Copy source

From 3.0 to 3.12 via OTA
Files attached
To get the new version, I had to do the OTA procedure twice.
After saving the settings, I lost the connection and data.
After restarting with Wi-Fi only, I found the data again.
I tried changing the reboot option and saving, but I lost the MQTT data.
I changed the reboot option again, saved, and found the MQTT data again.

There seems to be a problem saving and loading the data.

after_change_reboot_status_lost_mqtt_save_and_get_mqtt.json
after_change_reboot_status_lost_mqtt.json
all_clear_after_lost_and_save.json
after_lost_conn.json
after_ota2_and_2_reboot.json
after_ota.json
before_ota.json

From 3.0 to 3.12 via OTA Files attached To get the new version, I had to do the OTA procedure twice. After saving the settings, I lost the connection and data. After restarting with Wi-Fi only, I found the data again. I tried changing the reboot option and saving, but I lost the MQTT data. I changed the reboot option again, saved, and found the MQTT data again. There seems to be a problem saving and loading the data. [after_change_reboot_status_lost_mqtt_save_and_get_mqtt.json](https://github.com/user-attachments/files/22572439/after_change_reboot_status_lost_mqtt_save_and_get_mqtt.json) [after_change_reboot_status_lost_mqtt.json](https://github.com/user-attachments/files/22572444/after_change_reboot_status_lost_mqtt.json) [all_clear_after_lost_and_save.json](https://github.com/user-attachments/files/22572441/all_clear_after_lost_and_save.json) [after_lost_conn.json](https://github.com/user-attachments/files/22572445/after_lost_conn.json) [after_ota2_and_2_reboot.json](https://github.com/user-attachments/files/22572442/after_ota2_and_2_reboot.json) [after_ota.json](https://github.com/user-attachments/files/22572440/after_ota.json) [before_ota.json](https://github.com/user-attachments/files/22572443/before_ota.json) <!-- github-comment-id:3341468639 -->
adam commented 2026-10-05 05:51:12 +02:00
Author
Owner
Copy link
Copy source

new V3.1.3 is available

new V3.1.3 is available <!-- github-comment-id:3398254252 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#220