mirror of
https://github.com/richonguzman/LoRa_APRS_iGate.git
synced 2026-10-31 02:51:58 +01:00
Question: How do I setup 2024.11.06 for digi only? #150
Assignees
adam (Adam Wojcieszonek)
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
Notifications
Due Date
No due date set.
Dependencies
No dependencies set.
Reference: adam/LoRa_APRS_iGate#150
Reference in new issue
Block a user
I am currently using version 2024.01.12 for digi. On the screen I see
Rx: 433.775 Tx: 433.775
<< DigiRepeater >>
The above on-screen message lets me know the TTGO-LoRa32 is operating as a digi.
When I attempt to setup 2024.11.06 for digi only I cannot replicate the above screen, and I am not sure if digi is setup correctly.
Is the igate_conf.json below correct for digi only?
In version 2024.01.12 should I expect to see a screen like I see in version 2024.01.12? I do eventually see LoRa RX ----> LoRa Tx, which would suggest that digi is working.
How do I edit igate_conf.json to get the digipeater simplex green star?
"overlay": "L",
"symbol": "a",
Can the on-screen WiFi: AP APRS-IS: OFF IP: 192.168.4.1 message be removed from the screen by toggling a setting in the igate_conf.json?
Anything else I should do or know for digi only using version 2024.11.06?
Thank you.
{
"callsign": "AG7U-40",
"wifi": {
"autoAP": {
"password": "1234567890",
"timeout": 10
},
"AP": []
},
"beacon": {
"latitude": 39.529639,
"longitude": -104.824333,
"comment": "LoRa APRS",
"interval": 15,
"overlay": "L",
"symbol": "a",
"path": "WIDE1-1",
"sendViaAPRSIS": false,
"sendViaRF": true
},
"aprs_is": {
"active": false,
"passcode": "XYZVW",
"server": "rotate.aprs2.net",
"port": 14580,
"filter": "m/10",
"messagesToRF": false,
"objectsToRF": false
},
"digi": {
"mode": 2,
"ecoMode": false
},
"lora": {
"txFreq": 433775000,
"rxFreq": 433775000,
"spreadingFactor": 12,
"signalBandwidth": 125000,
"codingRate4": 5,
"power": 20,
"txActive": true,
"rxActive": true
},
"display": {
"alwaysOn": true,
"timeout": 4,
"turn180": false
},
"battery": {
"sendInternalVoltage": false,
"monitorInternalVoltage": false,
"internalSleepVoltage": 2.9,
"sendExternalVoltage": false,
"externalVoltagePin": 34,
"monitorExternalVoltage": false,
"externalSleepVoltage": 10.9,
"voltageDividerR1": 100.0,
"voltageDividerR2": 27.0,
"sendVoltageAsTelemetry": false
},
"wxsensor": {
"active": false,
"heightCorrection": 0,
"temperatureCorrection": 0.0
},
"syslog": {
"active": false,
"server": "192.168.0.100",
"port": 514
},
"tnc": {
"enableServer": false,
"enableSerial": false,
"acceptOwn": false
},
"ota": {
"username": "",
"password": ""
},
"webadmin": {
"username": "admin",
"password": ""
},
"ntp": {
"gmtCorrection": 0
},
"other": {
"rememberStationTime": 30,
"lowPowerMode": false,
"lowVoltageCutOff": 0,
"backupDigiMode": true,
"rebootMode": true,
"rebootModeTime": 12
},
"personalNote": ""
}
Can you edit all through the WebConfig UI created for all of this?
uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.
symbol is selected over WebConfig UI without any problem.
but if you need green star and still do it manually --> "symbol": "#",
at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours
Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.
From: Ricardo Guzman (Richonguzman) @.>
Sent: Saturday, November 30, 2024 5:14 PM
To: richonguzman/LoRa_APRS_iGate @.>
Cc: AG7U @.>; Author @.>
Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
Can you edit all through the WebConfig UI created for all of this?
uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.
symbol is selected over WebConfig UI without any problem.
but if you need green star and still do it manually --> "symbol": "#",
at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI.
You are receiving this because you authored the thread.Message ID: @.***>
but can you confirm its repeating? (besides the screen problem?)
De: AG7U @.>
Enviado: domingo, 1 de diciembre de 2024 9:24
Para: richonguzman/LoRa_APRS_iGate @.>
Cc: Ricardo Guzman (Richonguzman) @.>; Comment @.>
Asunto: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.
From: Ricardo Guzman (Richonguzman) @.>
Sent: Saturday, November 30, 2024 5:14 PM
To: richonguzman/LoRa_APRS_iGate @.>
Cc: AG7U @.>; Author @.>
Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
Can you edit all through the WebConfig UI created for all of this?
uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.
symbol is selected over WebConfig UI without any problem.
but if you need green star and still do it manually --> "symbol": "#",
at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI.
You are receiving this because you authored the thread.Message ID: @.***>
—
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509743662, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWBUGQ66AOCFUKDBUSTSML2DL5WVAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42DGNRWGI.
You are receiving this because you commented.Message ID: @.***>
Yes, I can confirm it is repeating.
Screenshot attached.
Two examples (raw from aprs.fi) proving WA0DE-T3 digipeated through AG7U-40, which was heard by two other iGates.
2024-12-01 11:20:41 MST: WA0DE-T3>APLRT1,AG7U-40*,qAR,K8ZTT-40:!/:OZ74!$C<!!Q
2024-12-01 11:23:04 MST: WA0DE-T3>APLRT1,AG7U-40*,qAO,N0KV-40:>https://github.com/richonguzman/LoRa_APRS_Tracker 2024.08.21
From: Ricardo Guzman (Richonguzman) @.>
Sent: Sunday, December 1, 2024 5:56 AM
To: richonguzman/LoRa_APRS_iGate @.>
Cc: AG7U @.>; Author @.>
Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
but can you confirm its repeating? (besides the screen problem?)
De: AG7U @.mailto:***@***.***>
Enviado: domingo, 1 de diciembre de 2024 9:24
Para: richonguzman/LoRa_APRS_iGate @.mailto:***@***.***>
Cc: Ricardo Guzman (Richonguzman) @.mailto:***@***.***>; Comment @.mailto:***@***.***>
Asunto: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
Using VSCODE I erased flash and performed a full clean. Using WebConfig UI I configured TTGO-LoRa32 for digipeater WIDE1. I do not see the word DIGIREPEATER on the LoRa32 screen. Attached is the WebConfig UI configuration. What am I doing wrong? This digipeater will be going back to an environment with no WiFi, which is why I did not update WiFi Access or APRS-IS settings.
From: Ricardo Guzman (Richonguzman) @.mailto:***@***.***>
Sent: Saturday, November 30, 2024 5:14 PM
To: richonguzman/LoRa_APRS_iGate @.mailto:***@***.***>
Cc: AG7U @.mailto:***@***.***>; Author @.mailto:***@***.***>
Subject: Re: [richonguzman/LoRa_APRS_iGate] Question: How do I setup 2024.11.06 for digi only? (Issue #199)
Can you edit all through the WebConfig UI created for all of this?
uploading from VSCODE filesystem igate_conf.json may lead to missing a variable or editing errors.
symbol is selected over WebConfig UI without any problem.
but if you need green star and still do it manually --> "symbol": "#",
at last, display should show DIGIREPEATEr without any problem, let me know if this is shown on yours
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509487152, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGLBNHGQ2BR6ECMFJUL2DJIGHAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZGQ4DOMJVGI.
You are receiving this because you authored the thread.Message ID: @.***mailto:***@***.***>
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509743662, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AQWBUGQ66AOCFUKDBUSTSML2DL5WVAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42DGNRWGI.
You are receiving this because you commented.Message ID: @.***mailto:***@***.***>
Reply to this email directly, view it on GitHubhttps://github.com/richonguzman/LoRa_APRS_iGate/issues/199#issuecomment-2509755865, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3P5BGPA5E5BNE2LD6YJADL2DMBPRAVCNFSM6AAAAABSY6WJL6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBZG42TKOBWGU.
You are receiving this because you authored the thread.Message ID: @.@.>>