adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-10-31 02:51:58 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

too fast(?) reboot after restoring from backup #164

New Issue
Closed
opened 2026-10-05 05:44:15 +02:00 by adam · 6 comments
adam commented 2026-10-05 05:44:15 +02:00
Owner
Copy link
Copy source

I did backup of my TTGO and flash RDZ_sonde fw to it to check oled display work.
After test I flashed igate fw again and tried to restore settings.
After Save in browser there was no Save confirmation in browser.
Save confirmation - succes is showed after reboot.
But from ttgo is served not changed (with restred data) data, but from full flash (nocall-10, etc.)
Maybe it is to much data to save and 2 seconds or less is not enogh before reboot.
Saving only AP and password is succesfull.

Maybe there should be some wait?
https://github.com/richonguzman/LoRa_APRS_iGate/blob/1ad13e3c09368cca0b4d7b6928254409b54af01f/src/web_utils.cpp#L225

Pic from Chrome DevTools
image

I did backup of my TTGO and flash RDZ_sonde fw to it to check oled display work. After test I flashed igate fw again and tried to restore settings. After Save in browser there was no Save confirmation in browser. Save confirmation - succes is showed after reboot. But from ttgo is served not changed (with restred data) data, but from full flash (nocall-10, etc.) Maybe it is to much data to save and 2 seconds or less is not enogh before reboot. Saving only AP and password is succesfull. Maybe there should be some wait? https://github.com/richonguzman/LoRa_APRS_iGate/blob/1ad13e3c09368cca0b4d7b6928254409b54af01f/src/web_utils.cpp#L225 Pic from Chrome DevTools ![image](https://github.com/user-attachments/assets/47011737-d22a-4047-bc0d-873dbfc3174b) <!-- github-sync-id:2769429719 -->
adam closed this issue 2026-10-05 05:44:15 +02:00
adam commented 2026-10-05 05:44:16 +02:00
Author
Owner
Copy link
Copy source

when you save, WIFIAP is killed and no web confirmation will appear.
did it work ok after saving the data?

when you save, WIFIAP is killed and no web confirmation will appear. did it work ok after saving the data? <!-- github-comment-id:2576214160 -->
adam commented 2026-10-05 05:44:16 +02:00
Author
Owner
Copy link
Copy source

Works, but save was no succesfull, no change in data, still old NOCALL instead my SQ9CWN, etc.

Works, but save was no succesfull, no change in data, still old NOCALL instead my SQ9CWN, etc. <!-- github-comment-id:2576217825 -->
adam commented 2026-10-05 05:44:17 +02:00
Author
Owner
Copy link
Copy source

could you flash it again with latest, erase all , and then only change your callsign and save to test?

could you flash it again with latest, erase all , and then only change your callsign and save to test? <!-- github-comment-id:2576229014 -->
adam commented 2026-10-05 05:44:18 +02:00
Author
Owner
Copy link
Copy source

Flashed v2.2.1
Call changed and saved succesesfully.
But after reconnection tried again importing backup json file, saving and no success, still only call changed like before restore try.
The same was when I was only adding my WiFi data after flashing.

But. I set all manually, did additional backup and flash with erase again, and from this fresh backup all was restored succesfully.

Flashed v2.2.1 Call changed and saved succesesfully. But after reconnection tried again importing backup json file, saving and no success, still only call changed like before restore try. The same was when I was only adding my WiFi data after flashing. But. I set all manually, did additional backup and flash with erase again, and from this fresh backup all was restored succesfully. <!-- github-comment-id:2576368659 -->
adam commented 2026-10-05 05:44:19 +02:00
Author
Owner
Copy link
Copy source

so it may be that your "old" restoring json file did not have all that was needed in the new "updated" version?

I've seen this bug sometimes when I add a few new things to the webUI to control more things

please confirm that adding the data manually did work

so it may be that your "old" restoring json file did not have all that was needed in the new "updated" version? I've seen this bug sometimes when I add a few new things to the webUI to control more things please confirm that adding the data manually did work <!-- github-comment-id:2576402001 -->
adam commented 2026-10-05 05:44:19 +02:00
Author
Owner
Copy link
Copy source

Yes

Yes <!-- github-comment-id:2576405281 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#164