Hello, my board is LilyGo Q408-Mesh T-Beam 433Mhz AXP2101-V1.2
I flashed either tracker and iGate using Web Flash CA2RXU page but the board does not work after reset.
The board selection refers only to AXP1201 ... may be the AXP2101 firmware has not yet been released ?
Hello, my board is LilyGo Q408-Mesh T-Beam 433Mhz AXP2101-V1.2
I flashed either tracker and iGate using Web Flash CA2RXU page but the board does not work after reset.
The board selection refers only to AXP1201 ... may be the AXP2101 firmware has not yet been released ?
BTW using Platformio i've been able to compile an upload an other project (https://github.com/lora-aprs/LoRa_APRS_Tracker)
But i would like to install iGate on the board.
73, Fabio IZ0IBA
<!-- github-sync-id:3751628674 -->
please confirm the right selection of the board for each of your board (T-Beam V1.2 as you said) and that you connected to the WiFiAP for configuration process.
Hi Fabio,
please confirm the right selection of the board for each of your board (T-Beam V1.2 as you said) and that you connected to the WiFiAP for configuration process.
<!-- github-comment-id:3679506278 -->
Fabio, I don't know if you've resolved your issue, but I can confirm that I've flashed as trackers 3 T-Beam V1.2 units in the past few weeks and all work as expected. Cheers and 73 - Jon N7UV
Fabio, I don't know if you've resolved your issue, but I can confirm that I've flashed as trackers 3 T-Beam V1.2 units in the past few weeks and all work as expected. Cheers and 73 - Jon N7UV
<!-- github-comment-id:3860795417 -->
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Hello, my board is LilyGo Q408-Mesh T-Beam 433Mhz AXP2101-V1.2
I flashed either tracker and iGate using Web Flash CA2RXU page but the board does not work after reset.
The board selection refers only to AXP1201 ... may be the AXP2101 firmware has not yet been released ?
BTW using Platformio i've been able to compile an upload an other project (https://github.com/lora-aprs/LoRa_APRS_Tracker)
But i would like to install iGate on the board.
73, Fabio IZ0IBA
Hi Fabio,
please confirm the right selection of the board for each of your board (T-Beam V1.2 as you said) and that you connected to the WiFiAP for configuration process.
Fabio, I don't know if you've resolved your issue, but I can confirm that I've flashed as trackers 3 T-Beam V1.2 units in the past few weeks and all work as expected. Cheers and 73 - Jon N7UV