adam/LoRa_APRS_iGate
1
0 Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-10-31 02:51:58 +01:00
Code Issues 55 Packages Projects Releases Wiki Activity

2024-04-13 version #55

New Issue
Closed
opened 2026-10-05 05:32:26 +02:00 by adam · 5 comments
adam commented 2026-10-05 05:32:26 +02:00
Owner
Copy link
Copy source

today I updated my Solar test digi +WX and noticed a few things:

  • in the digi+WX, if the BME is disconnected the digi/iGate do not start and display "error, BME configured but BME missing" would it be possible to bypass this, and have the digi working even in case the BME lost connectivity or get damaged?
  • the display is not shutting down even if selected.
  • I enabled "power saving mode", and system "shut down at low level:". When I write the level, how the parameter is written? with coma, or point? with decimal? I put 3.2 with a point and one decimal but not sure it is the right format.
  • The wiki warm about carefull connection to monitor external battery, and indicate to check for a specific information. But in fact this specific information is missing (or I couldn't found)
    Thanks for the great job
    iw2ejh
today I updated my Solar test digi +WX and noticed a few things: - in the digi+WX, if the BME is disconnected the digi/iGate do not start and display "error, BME configured but BME missing" would it be possible to bypass this, and have the digi working even in case the BME lost connectivity or get damaged? - the display is not shutting down even if selected. - I enabled "power saving mode", and system "shut down at low level:". When I write the level, how the parameter is written? with coma, or point? with decimal? I put 3.2 with a point and one decimal but not sure it is the right format. - The wiki warm about carefull connection to monitor external battery, and indicate to check for a specific information. But in fact this specific information is missing (or I couldn't found) Thanks for the great job iw2ejh <!-- github-sync-id:2252697162 -->
adam closed this issue 2026-10-05 05:32:26 +02:00
adam commented 2026-10-05 05:32:27 +02:00
Author
Owner
Copy link
Copy source
  1. good idea... will check it out
  2. will check it out
  3. with "." always
  4. where does it say specific information? do you mean about voltage divider?
1) good idea... will check it out 2) will check it out 3) with "." always 4) where does it say specific information? do you mean about voltage divider? <!-- github-comment-id:2066609740 -->
adam commented 2026-10-05 05:32:27 +02:00
Author
Owner
Copy link
Copy source
#"where does it say specific information? do you mean about voltage divider?"

-but I cannot found other special info.

#"where does it say specific information? do you mean about voltage divider?" - In the wiki, https://github.com/richonguzman/LoRa_APRS_iGate/wiki/11.-VSCODE-iGate-Configuration -OTHER - "externalVoltageMeasurement" : true will measure a 12V battery through a voltage divider resistor net and send its Voltage to APRS-IS. Default is false. **_Look for special info on this Wiki to connect the battery and voltage divider to avoid burning the board._** -but I cannot found other special info. <!-- github-comment-id:2066665676 -->
adam commented 2026-10-05 05:32:28 +02:00
Author
Owner
Copy link
Copy source

between all the changes this was moved and deleted... will add it soon

meanwhile:

its a voltage divider for external voltage measurement.
Max Voltage to read 15v
resistor 1: 100K (between + of battery to ESP32 pin)
resistor 2: 27K from ESP32 pin to GND

between all the changes this was moved and deleted... will add it soon meanwhile: its a voltage divider for external voltage measurement. Max Voltage to read 15v resistor 1: 100K (between + of battery to ESP32 pin) resistor 2: 27K from ESP32 pin to GND <!-- github-comment-id:2066682798 -->
adam commented 2026-10-05 05:32:28 +02:00
Author
Owner
Copy link
Copy source

In "Received Packets" the last 20 received packets should be listed, but here on my end it only shows 11.

The "Received Packets" list also has a long delay time ... received packets (e.g. from my own tracker) are sent to APRS-IS immediately, but in the list these packets appear much later (sometimes up to 30 minutes).

73 Martin
OE5REO

In "Received Packets" the last 20 received packets should be listed, but here on my end it only shows 11. The "Received Packets" list also has a long delay time ... received packets (e.g. from my own tracker) are sent to APRS-IS immediately, but in the list these packets appear much later (sometimes up to 30 minutes). 73 Martin OE5REO <!-- github-comment-id:2072108068 -->
adam commented 2026-10-05 05:32:29 +02:00
Author
Owner
Copy link
Copy source

many things of the list are already done... I have taken notes of the missing ones to add/Check them soon

many things of the list are already done... I have taken notes of the missing ones to add/Check them soon <!-- github-comment-id:2174754513 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/LoRa_APRS_iGate#55