mirror of
https://github.com/dabeani/meshcoreterm.git
synced 2026-10-31 10:11:57 +01:00
Collected issues for firmware version 0.9.11. #147
Assignees
adam (Adam Wojcieszonek)
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
Notifications
Due Date
No due date set.
Dependencies
No dependencies set.
Reference: adam/meshcore#147
Reference in new issue
Block a user
Ahoj,
this is a collection of issues I see with firmware version 0.9.11 on LilyGo T-Deck Plus:
Newly discovered issues:
Map: Tapping on a repeater does open the popup with repeater name, time since last heard and distance only in zoom levels 1..10 and zoom levels 12..13.ISSUE: In zoom level 11, and from zoom level 14 onwards that does not open.(When I now purged almost all contacts, it also works in zoom levels 11 and 14+.)
Map: According to release notes:
That works really unreliably for me. Too fast tapping is not recognised, too slow of course also not, it is difficult to find the correct tapping speed.
Suggestion: No double tapping at all. Single tap opens the info box as it currently does, and tapping into the info box opens the details. This actually is also what I would expect from a user interface.
Room/ repeater login issue: After flashing 0.9.11, I could log in to a room server, and post there. Then I could log in to my repeater (zero-hop) as admin. I went to the CLI, issued one command, got a response. Further commands did not get any response anymore. From this point on, I also could not re-login to that repeater or any room server. Even over a reboot, I still cannot log in to the repeater or any room server that worked previously.Mgmt→Contacts→AutoAdd Max Hops: The value shown in the overview screen is one less than the value input via theEditbutton. This is confusing, and unclear which actually is the true value.Mgmt->WiFi: When entering a password before entering an SSID, password in the overview is shown as "(not set)", although it is saved: When entering the SSID, the previously entered password appears as set.Keyboard backlight stays on even after timeout when switched on via
<alt>+<b>Scan for nearby repeaters: According to release notes:
For repeaters which were discovered via the "scan" feature, only the 1-byte prefix of the hash is known (no full advert is sent via this functionality). In firmware version 0.9.10, those repeaters could be added with an "Add" button. Now they cannot. It is not clear weather they cannot because there is at least one repeater with the same prefix already in the contacts list or not; when I tap a so-discovered repeater it only says "no key" and not a more verbose message like "repeater(s) with that prefix already in contact list: [list of multiple repeaters with that prefix]".
Issues already observed in version 0.9.10 or older versions:
Map: As in firmware version 0.9.10, after a reboot all nodes still get a green-ish colour. According to this description, green means 0 hop, but definitely not all the repeaters have zero hop. Here is the original report for firmware 0.9.10, except for that in 0.9.11 now instead of the squares the first byte of the ID is shown, the colours are the same.
Map: As in firmware version 0.9.10, I still have on the map one repeater coloured in Purple, Magenta or Pink/Magenta (I cannot say which colour it is exactly), but I have a 0-hop login to it and in the "Contacts" screen when I tap on ot to see the details it says
Route: Direct. According to this description, it should be coloured in green. Here is the original report for firmware version 0.9.10.Room and channel messages are still not saved over a reboot.
Text input: Still cannot input characters not on the T-Deck's hardware keyboard. An optional on-screen keyboard that can be opened on request would be really helpful.
In messages screen, at the top: Channels within their boxes which would be partly visible are not rendered at all; they abruptly appear as soon as they would fit fully on the screen. At the bottom they just "normally" scroll out of screen; and in the "Contacts" screen they normally scroll at the top as well.
"Received messages are not save after reboot".
"Contacts list looses almost all last heard timestamps, then they reappear and for few contacts they are wrongly displayed (but correctly sorted).".
"Some usernames are not rendered correctly: Just as
<-->, and then "username: " followed behind in the normal text view.".For completeness: Issues I experienced in version 0.9.10 (or older) which I was not yet able to test:
"Tapping the screen on the "Contacts" tab makes some contact transiently changing their colour.",
[T-Deck] Sent messages do not synchronise between Companion app and T-Deck." (sub-issue doubled messages with 63 hops),seems to be fixed,
not all settings are saved to SD card,
if room server messages can be copied to clipboard now.
Regards!
If you prefer that I open an individual issue report for each new issue, @dabeani, please tell and I will do so and close this "collected issues" thread instead.
Regards!
Can not reproduce this issue anymore (log in now works again), so I treat it as a non-issue now.
When I purged almost all contacts this now does work also in zoom levels 11 and 14+.
I did split out the "Newly discovered issues" into individuals reports (#167, #168, #169, #170, #171) and so closing this "collected issues" thread.
This one seems to be fixed.