Add upgrade script for pyMC Repeater: automate updates, service management, and error handling

README.md

@@ -26,6 +26,47 @@ My hope is that **pyMC_repeater** serves as a solid, approachable foundation tha
 
 The repeater daemon runs continuously as a background process, forwarding LoRa packets using `pymc_core`'s Dispatcher and packet routing.
 
+Supported Hardware (Out of the Box)
+
+The following hardware is currently supported out-of-the-box:
+
+Waveshare LoRaWAN/GNSS HAT
+
+    Hardware: Waveshare SX1262 LoRa HAT
+    Platform: Raspberry Pi (or compatible single-board computer)
+    Frequency: 868MHz (EU) or 915MHz (US)
+    TX Power: Up to 22dBm
+    SPI Bus: SPI0
+    GPIO Pins: CS=21, Reset=18, Busy=20, IRQ=16
+
+HackerGadgets uConsole
+
+    Hardware: uConsole RTL-SDR/LoRa/GPS/RTC/USB Hub
+    Platform: Clockwork uConsole (Raspberry Pi CM4/CM5)
+    Frequency: 433/915MHz (configurable)
+    TX Power: Up to 22dBm
+    SPI Bus: SPI1
+    GPIO Pins: CS=-1, Reset=25, Busy=24, IRQ=26
+    Additional Setup: Requires SPI1 overlay and GPS/RTC configuration (see uConsole setup guide)
+
+Frequency Labs meshadv-mini
+
+    Hardware: FrequencyLabs meshadv-mini Hat
+    Platform: Raspberry Pi (or compatible single-board computer)
+    Frequency: 868MHz (EU) or 915MHz (US)
+    TX Power: Up to 22dBm
+    SPI Bus: SPI0
+    GPIO Pins: CS=8, Reset=24, Busy=20, IRQ=16
+
+Frequency Labs meshadv
+
+    Hardware: FrequencyLabs meshadv-mini Hat
+    Platform: Raspberry Pi (or compatible single-board computer)
+    Frequency: 868MHz (EU) or 915MHz (US)
+    TX Power: Up to 22dBm
+    SPI Bus: SPI0
+    GPIO Pins: CS=21, Reset=18, Busy=20, IRQ=16, TXEN=13, RXEN=12
+
 ...
 
 ## Screenshots
@@ -84,7 +125,28 @@ To reconfigure radio and hardware settings after installation, run:
 ```bash
 sudo bash setup-radio-config.sh /etc/pymc_repeater
 sudo systemctl restart pymc-repeater
+
 ```
+## Upgrading
+
+To upgrade an existing installation to the latest version:
+
+```bash
+# Navigate to your pyMC_Repeater directory
+cd pyMC_Repeater
+
+# Run the upgrade script
+sudo ./upgrade.sh
+```
+
+The upgrade script will:
+- Pull the latest code from the main branch
+- Update all application files
+- Upgrade Python dependencies if needed
+- Restart the service automatically
+- Preserve your existing configuration
+
+
 
 
 ## Uninstallation
@@ -162,3 +224,7 @@ Pre-commit hooks will automatically:
 ## License
 
 This project is licensed under the MIT License - see the LICENSE file for details.
+
+
+
+

upgrade.sh

@@ -0,0 +1,88 @@
+#!/bin/bash
+# Simple upgrade script for pyMC Repeater
+
+set -e
+
+INSTALL_DIR="/opt/pymc_repeater"
+SERVICE_USER="repeater"
+
+echo "=== pyMC Repeater Upgrade ==="
+
+# Check if running as root
+if [ "$EUID" -ne 0 ]; then
+    echo "Error: This script must be run as root"
+    exit 1
+fi
+
+# Check if pyMC Repeater is installed
+if [ ! -d "$INSTALL_DIR" ]; then
+    echo "Error: pyMC Repeater is not installed in $INSTALL_DIR"
+    echo "Please run deploy.sh to install first."
+    exit 1
+fi
+
+# Check if we're in a git repository
+if [ ! -d ".git" ]; then
+    echo "Error: This script must be run from the pyMC Repeater git repository root"
+    exit 1
+fi
+
+# Check service status
+SERVICE_WAS_RUNNING=false
+if systemctl is-active --quiet pymc-repeater; then
+    SERVICE_WAS_RUNNING=true
+    echo "Stopping pyMC Repeater service..."
+    systemctl stop pymc-repeater
+fi
+
+# Pull latest changes
+echo "Pulling latest code from main branch..."
+git fetch origin
+git checkout main
+git pull origin main
+
+# Copy updated files
+echo "Installing updated files..."
+cp -r repeater "$INSTALL_DIR/"
+cp pyproject.toml "$INSTALL_DIR/"
+cp README.md "$INSTALL_DIR/"
+cp setup-radio-config.sh "$INSTALL_DIR/"
+cp radio-settings.json "$INSTALL_DIR/"
+
+# Update systemd service if changed
+if [ -f "pymc-repeater.service" ]; then
+    cp pymc-repeater.service /etc/systemd/system/
+    systemctl daemon-reload
+fi
+
+# Update Python package and dependencies
+echo "Updating Python package and dependencies..."
+cd "$INSTALL_DIR"
+pip install --break-system-packages --upgrade --force-reinstall -e .
+
+# Set permissions
+chown -R "$SERVICE_USER:$SERVICE_USER" "$INSTALL_DIR"
+
+# Restart service if it was running
+if [ "$SERVICE_WAS_RUNNING" = true ]; then
+    echo "Starting pyMC Repeater service..."
+    systemctl start pymc-repeater
+    sleep 2
+    
+    if systemctl is-active --quiet pymc-repeater; then
+        echo "✓ Service restarted successfully"
+    else
+        echo "✗ Service failed to start - check logs:"
+        journalctl -u pymc-repeater --no-pager -n 10
+        exit 1
+    fi
+fi
+
+echo ""
+echo "=== Upgrade Complete ==="
+echo "Updated to: $(git rev-parse --short HEAD)"
+echo ""
+echo "Check status: systemctl status pymc-repeater"
+echo "View logs: journalctl -u pymc-repeater -f"
+echo "Dashboard: http://$(hostname -I | awk '{print $1}'):8000"
+echo "----------------------------------"