iarv/loradar_tool
1
0
Fork 0
mirror of https://github.com/loradar/loradar_tool.git synced 2026-05-03 12:02:55 +02:00
Code Issues Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
loradar
2019-10-28 19:16:32 +11:00
committed by GitHub
parent ed1c2ddf5f
commit af42f7d31e
1 changed files with 10 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
Version 1 (mTAC-LoRa)/README.md
View File

@@ -15,14 +15,17 @@ This version setup uses the following hardware:
*The Raspberry Pi has been configured to initiate the 'Packet logger software' upon powering on and obtaining the correct time via the Internet (A delay of 5 minutes has been placed).*
## Instructions
1) Download the Raspberry Pi (RPi) image from https://drive.google.com/file/d/1OAoVtyabDzkLRxGgQARBqh3THc2MbKr8/view?usp=sharing
1) Download the Raspberry Pi (RPi) image according to the frequency bandplan of interest, from https://drive.google.com/file/d/1OAoVtyabDzkLRxGgQARBqh3THc2MbKr8/view?usp=sharing
2) Flash the image onto an SD card, using _balenaEtcher_ (https://www.balena.io/etcher/)
3) Insert the SD card into the RPi and power it on
4) In Rpi, open a console and run the following codes
`code goes here`
5) Reboot the RPi, and the data collection should commence in 5 minutes (It is recommended that you connect the RPi to a wired or wireless network so that the correct time can be obtained)
3) Insert the SD card into the RPi and power it on, and the data collection should commence in 5 minutes (It is recommended that you connect the RPi to a wired or wireless network so that the correct time can be obtained)
## Information extraction
To extract the information, follow the steps below:
1) Download the _LoRadar data extraction.py_ python script from above
2)
1) Download the _Ver1\_LoRadar\_Extractor.py_ python script from above and place it in the _Downloads_ folder of the Raspberry Pi
2) Open a terminal and enter run the following commands to install the required libraries:
`sudo apt-get install python3-matplotlib --assume-yes`
`sudo apt-get install python3-pandas --assume-yes`
3) Open the python script with _Python 3 (IDLE)_
4) Run the module
5) Upon successful extraction, a csv file will be created in the same directory as the _Ver1\_LoRadar\_Extractor.py_ python script