gps payload decoding fix

definition fix for VisionMaster
Merge pull request #375 from richonguzman/richonguzman-patch-16
2026-03-28 16:52:33 +01:00 · 2025-12-28 10:06:34 -03:00 · 2025-12-23 08:32:06 -03:00 · 2025-12-22 23:02:46 -03:00 · 2025-12-22 22:59:21 -03:00 · 2025-12-22 21:34:58 -03:00
88 changed files with 565 additions and 129 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -71,6 +71,10 @@ jobs:
                      chip: esp32c3
                    - name: heltec_wireless_paper_v1
                      chip: esp32s3
+                    - name: heltec_wireless_paper_v1_2
+                      chip: esp32s3
+                    - name: heltec_vision_master_e290
+                      chip: esp32s3
                    - name: OE5HWN_MeshCom
                      chip: esp32
                    - name: WEMOS-LOLIN32-OLED-DIY
--- a/README.md
+++ b/README.md
@@ -12,7 +12,7 @@ ____________________________________________________
 # <a href="https://richonguzman.github.io/lora-igate-web-flasher/installer.html" target="_blank">WEB FLASHER/INSTALLER</a>


-# <a href="https://drive.google.com/file/d/1-jafzOWis_qOaNUl4WGVcFKjh_uCJtB6/view?usp=share_link" target="_blank">LoRa APRS iGate CA2RXU Firmware Manual</a>
+# <a href="https://drive.google.com/file/d/1Hff_Szd7ks8RC7_RiV6POxPJlclbO05M/view?usp=sharing" target="_blank">LoRa APRS iGate CA2RXU Firmware Manual</a>

 ____________________________________________________

@@ -51,6 +51,9 @@ ____________________________________________________
 <br />

 # Timeline (Versions):
+- 2025-12-22 Heltec Wireless Paper V1.2 and VisionMaster E290 Added. Thanks HA5SZI.
+- 2025-12-18 TCXO and packet decoding updates.
+- 2025-12-01 APRSPacketLib updates, AHT20 sensor added, INA219 support added.
 - 2025-10-15 APRS Bridge for TNC added.
 - 2025-10-13 Rx and Tx Frequencies are now with fully configurable.
 - 2025-10-13 Startup Delay to allow the Router/Modem to start WiFiAP before connecting.
--- a/common_settings.ini
+++ b/common_settings.ini
@@ -2,32 +2,33 @@
 build_flags =
 	-Werror -Wall
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-	-DRADIOLIB_EXCLUDE_CC1101=1
-	-DRADIOLIB_EXCLUDE_NRF24=1
-	-DRADIOLIB_EXCLUDE_RF69=1
-	-DRADIOLIB_EXCLUDE_SX1231=1
-	-DRADIOLIB_EXCLUDE_SX1233=1
-	-DRADIOLIB_EXCLUDE_SI443X=1
-	-DRADIOLIB_EXCLUDE_RFM2X=1
-	-DRADIOLIB_EXCLUDE_AFSK=1
-	-DRADIOLIB_EXCLUDE_BELL=1
-	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-	-DRADIOLIB_EXCLUDE_MORSE=1
-	-DRADIOLIB_EXCLUDE_RTTY=1
-	-DRADIOLIB_EXCLUDE_SSTV=1
-	-DRADIOLIB_EXCLUDE_AX25=1
-	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-	-DRADIOLIB_EXCLUDE_BELL=1
-	-DRADIOLIB_EXCLUDE_PAGER=1
-	-DRADIOLIB_EXCLUDE_FSK4=1
-	-DRADIOLIB_EXCLUDE_APRS=1
-	-DRADIOLIB_EXCLUDE_LORAWAN=1
+	-D RADIOLIB_EXCLUDE_CC1101=1
+	-D RADIOLIB_EXCLUDE_RF69=1
+	-D RADIOLIB_EXCLUDE_RFM2X=1
+	-D RADIOLIB_EXCLUDE_SX1231=1
+	-D RADIOLIB_EXCLUDE_SX1233=1
+	-D RADIOLIB_EXCLUDE_SI443X=1
+	-D RADIOLIB_EXCLUDE_NRF24=1
+	-D RADIOLIB_EXCLUDE_AFSK=1
+	-D RADIOLIB_EXCLUDE_APRS=1
+	-D RADIOLIB_EXCLUDE_AX25=1
+	-D RADIOLIB_EXCLUDE_BELL=1
+	-D RADIOLIB_EXCLUDE_FSK4=1
+	-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
+	-D RADIOLIB_EXCLUDE_LORAWAN=1
+	-D RADIOLIB_EXCLUDE_MORSE=1
+	-D RADIOLIB_EXCLUDE_PAGER=1
+	-D RADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+	-D RADIOLIB_EXCLUDE_RTTY=1
+	-D RADIOLIB_EXCLUDE_SSTV=1
 	-I variants/${PIOENV}
 lib_deps =
 	adafruit/Adafruit Unified Sensor @ 1.1.14
+	adafruit/Adafruit AHTX0 @ 2.0.5
 	adafruit/Adafruit BME280 Library @ 2.2.4
 	adafruit/Adafruit BMP280 Library @ 2.6.8
 	adafruit/Adafruit BME680 Library @ 2.0.4
+	adafruit/Adafruit INA219 @ 1.2.3
 	adafruit/Adafruit Si7021 Library @ 1.5.3
 	arduino-libraries/NTPClient @ 3.2.1
 	ayushsharma82/ElegantOTA @ 3.1.5
@@ -37,7 +38,7 @@ lib_deps =
 	mathieucarbou/AsyncTCP @ 3.2.5
 	mathieucarbou/ESPAsyncWebServer @ 3.2.3
 	mikalhart/TinyGPSPlus @ 1.0.3
-	richonguzman/APRSPacketLib @1.0.4
+	richonguzman/APRSPacketLib @ 1.0.4
 display_libs =
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10
--- a/data/igate_conf.json
+++ b/data/igate_conf.json
@@ -61,11 +61,12 @@
        "monitorInternalVoltage": false,
        "internalSleepVoltage": 2.9,
        "sendExternalVoltage": false,
-        "externalVoltagePin": 34,
        "monitorExternalVoltage": false,
        "externalSleepVoltage": 10.9,
+        "useExternalI2CSensor": false,
        "voltageDividerR1": 100.0,
        "voltageDividerR2": 27.0,
+        "externalVoltagePin": 34,
        "sendVoltageAsTelemetry": false
 	},
    "wxsensor": {
--- a/data_embed/index.html
+++ b/data_embed/index.html
@@ -1196,7 +1196,20 @@
                                                >Send External Voltage</label
                                            >
                                        </div>
-                                        <div class="form-check form-switch mt-5">
+                                        <div class="form-check form-switch">
+                                            <input
+                                                type="checkbox"
+                                                name="battery.useExternalI2CSensor"
+                                                id="battery.useExternalI2CSensor"
+                                                class="form-check-input"
+                                            />
+                                            <label
+                                                for="battery.useExternalI2CSensor"
+                                                class="form-label"
+                                                >Use External I2C Voltage Sensor</label
+                                            >
+                                        </div>
+                                        <div class="form-check form-switch">
                                            <input
                                                type="checkbox"
                                                name="battery.monitorExternalVoltage"
@@ -2009,6 +2022,7 @@
                                            name="remoteManagement.managers"
                                            id="remoteManagement.managers"
                                            class="form-control"
+                                            oninput="this.value = this.value.toUpperCase();"
                                        />
                                    </div>
                                </div>
--- a/data_embed/script.js
+++ b/data_embed/script.js
@@ -168,13 +168,16 @@ function loadSettings(settings) {
    MonitorInternalSleepVoltage.disabled    = !MonitorInternalVoltageCheckbox.checked;

    document.getElementById("battery.sendExternalVoltage").checked      = settings.battery.sendExternalVoltage;
+    document.getElementById("battery.useExternalI2CSensor").checked     = settings.battery.useExternalI2CSensor;
    document.getElementById("battery.externalVoltagePin").value         = settings.battery.externalVoltagePin;
    document.getElementById("battery.voltageDividerR1").value           = settings.battery.voltageDividerR1.toFixed(1);
    document.getElementById("battery.voltageDividerR2").value           = settings.battery.voltageDividerR2.toFixed(1);
    SendExternalVoltageCheckbox.checked     = settings.battery.sendExternalVoltage;
-    ExternalVoltagePin.disabled             = !SendExternalVoltageCheckbox.checked;
-    ExternalVoltageDividerR1.disabled       = !SendExternalVoltageCheckbox.checked;
-    ExternalVoltageDividerR2.disabled       = !SendExternalVoltageCheckbox.checked;
+    UseExternalI2CSensorCheckbox.disabled   = !SendExternalVoltageCheckbox.checked;
+    ExternalVoltagePin.disabled             = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR1.disabled       = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR2.disabled       = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
+

    document.getElementById("battery.monitorExternalVoltage").checked   = settings.battery.monitorExternalVoltage;
    document.getElementById("battery.externalSleepVoltage").value       = settings.battery.externalSleepVoltage.toFixed(1);
@@ -218,12 +221,12 @@ function loadSettings(settings) {
    document.getElementById("mqtt.port").value                          = settings.mqtt.port;
    document.getElementById("mqtt.beaconOverMqtt").checked              = settings.mqtt.beaconOverMqtt;
    MqttCheckbox.checked        = settings.mqtt.active;
-    MqttServer.disabled         = !MqttCheckbox.check;
-    MqttTopic.disabled          = !MqttCheckbox.check;
-    MqttUsername.disabled       = !MqttCheckbox.check;
-    MqttPassword.disabled       = !MqttCheckbox.check;
-    MqttPort.disabled           = !MqttCheckbox.check;
-    MqttBeaconOverMqtt.disabled = !MqttCheckbox.check;
+    MqttServer.disabled         = !MqttCheckbox.checked;
+    MqttTopic.disabled          = !MqttCheckbox.checked;
+    MqttUsername.disabled       = !MqttCheckbox.checked;
+    MqttPassword.disabled       = !MqttCheckbox.checked;
+    MqttPort.disabled           = !MqttCheckbox.checked;
+    MqttBeaconOverMqtt.disabled = !MqttCheckbox.checked;

    // Reboot
    document.getElementById("other.rebootMode").checked                 = settings.other.rebootMode;
@@ -360,13 +363,21 @@ MonitorExternalVoltageCheckbox.addEventListener("change", function () {
    MonitorExternalSleepVoltage.disabled    = !this.checked;
 });
 const SendExternalVoltageCheckbox           = document.querySelector('input[name="battery.sendExternalVoltage"]');
+const UseExternalI2CSensorCheckbox          = document.querySelector('input[name="battery.useExternalI2CSensor"]');
 const ExternalVoltagePin                    = document.querySelector('input[name="battery.externalVoltagePin"]');
 const ExternalVoltageDividerR1              = document.querySelector('input[name="battery.voltageDividerR1"]');
 const ExternalVoltageDividerR2              = document.querySelector('input[name="battery.voltageDividerR2"]');
 SendExternalVoltageCheckbox.addEventListener("change", function () {
-    ExternalVoltagePin.disabled             = !this.checked;
-    ExternalVoltageDividerR1.disabled       = !this.checked;
-    ExternalVoltageDividerR2.disabled       = !this.checked;
+    UseExternalI2CSensorCheckbox.disabled   = !this.checked;
+    ExternalVoltagePin.disabled             = !this.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR1.disabled       = !this.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR2.disabled       = !this.checked || UseExternalI2CSensorCheckbox.checked;
+});
+
+UseExternalI2CSensorCheckbox.addEventListener("change", function () {
+    ExternalVoltagePin.disabled             = this.checked;
+    ExternalVoltageDividerR1.disabled       = this.checked;
+    ExternalVoltageDividerR2.disabled       = this.checked;
 });

 // Telemetry Switches
--- a/include/configuration.h
+++ b/include/configuration.h
@@ -102,6 +102,7 @@ public:
    int     externalVoltagePin;
    bool    monitorExternalVoltage;
    float   externalSleepVoltage;
+    bool    useExternalI2CSensor;
    float   voltageDividerR1;
    float   voltageDividerR2;
    bool    sendVoltageAsTelemetry;
--- a/include/wx_utils.h
+++ b/include/wx_utils.h
@@ -20,6 +20,7 @@
 #define WX_UTILS_H_

 #include <Adafruit_Sensor.h>
+#include <Adafruit_AHTX0.h> 
 #include <Adafruit_BME280.h>
 #include <Adafruit_BMP280.h>
 #include <Adafruit_BME680.h>
--- a/src/LoRa_APRS_iGate.cpp
+++ b/src/LoRa_APRS_iGate.cpp
@@ -67,8 +67,8 @@ ___________________________________________________________________*/
 #endif


-String              versionDate             = "2025-11-30";
-String              versionNumber           = "3.1.5";
+String              versionDate             = "2025-12-28";
+String              versionNumber           = "3.1.6.3";
 Configuration       Config;
 WiFiClient          aprsIsClient;
 WiFiClient          mqttClient;
--- a/src/aprs_is_utils.cpp
+++ b/src/aprs_is_utils.cpp
@@ -278,8 +278,9 @@ namespace APRS_IS_Utils {
        if (!passcodeValid && packet.indexOf(Config.callsign) != -1) {
            if (packet.indexOf("unverified") != -1 ) {
                Serial.println("\n****APRS PASSCODE NOT VALID****\n");
-                displayShow(firstLine, "", "    APRS PASSCODE", "    NOT VALID !!!", "", "", "", 0);
-                while (1) {};
+                displayShow(firstLine, "", "    APRS PASSCODE", "    NOT VALID !!!", "", "", "", 3000);
+                aprsIsClient.stop();
+                Config.aprs_is.active = false;
            } else if (packet.indexOf("verified") != -1 ) {
                passcodeValid = true;
            }
--- a/src/battery_utils.cpp
+++ b/src/battery_utils.cpp
@@ -16,7 +16,7 @@
 * along with LoRa APRS iGate. If not, see <https://www.gnu.org/licenses/>.
 */

-#include <Arduino.h>
+#include <Adafruit_INA219.h>
 #include "battery_utils.h"
 #include "configuration.h"
 #include "board_pinout.h"
@@ -37,6 +37,10 @@ float   multiplyCorrection              = 0.035;

 float   voltageDividerTransformation    = 0.0;

+uint8_t externalI2CSensorAddress        = 0x00;
+int     externalI2CSensorType           = 0; // 0 = None | 1 = INA219
+
+Adafruit_INA219     ina219;


 #ifdef HAS_ADC_CALIBRATION
@@ -98,6 +102,30 @@ namespace BATTERY_Utils {
        #endif
    }

+    void getI2CVoltageSensorAddress() {
+        uint8_t err, addr;
+        for(addr = 1; addr < 0x7F; addr++) {
+            #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+                Wire1.beginTransmission(addr);
+                err = Wire1.endTransmission();
+            #else
+                Wire.beginTransmission(addr);
+                err = Wire.endTransmission();
+            #endif
+            delay(5);
+            if (err == 0) {
+                if (addr == 0x40) { // INA219
+                    externalI2CSensorAddress = addr;
+                }
+            }
+        }
+    }
+
+    bool detectINA219(uint8_t addr) {
+        ina219 = Adafruit_INA219(addr);
+        return ina219.begin();
+    }
+
    void setup() {
        if ((Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) && Config.battery.voltageDividerR2 != 0) voltageDividerTransformation = (Config.battery.voltageDividerR1 + Config.battery.voltageDividerR2) / Config.battery.voltageDividerR2;

@@ -107,6 +135,14 @@ namespace BATTERY_Utils {
                adcCalibration();
            }
        #endif
+
+        getI2CVoltageSensorAddress();
+        if (externalI2CSensorAddress != 0x00) {
+            if (detectINA219(externalI2CSensorAddress)) {
+                Serial.println("INA219 sensor found");
+                externalI2CSensorType = 1;  // INA219
+            }
+        }
    }

    float checkInternalVoltage() { 
@@ -177,37 +213,49 @@ namespace BATTERY_Utils {
    }

    float checkExternalVoltage() {
-        int sample;
-        int sampleSum = 0;
-        for (int i = 0; i < 100; i++) {
-            #ifdef HAS_ADC_CALIBRATION
-                if (calibrationEnable){
-                    sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
-                } else {
+        if (externalI2CSensorType == 0) {
+            int sample;
+            int sampleSum = 0;
+            for (int i = 0; i < 100; i++) {
+                #ifdef HAS_ADC_CALIBRATION
+                    if (calibrationEnable){
+                        sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
+                    } else {
+                        sample = analogRead(Config.battery.externalVoltagePin);
+                    }
+                #else
                    sample = analogRead(Config.battery.externalVoltagePin);
+                #endif
+                sampleSum += sample;
+                delayMicroseconds(50);
+            }
+
+            float extVoltage;
+            #ifdef HAS_ADC_CALIBRATION
+                if (calibrationEnable) {
+                    extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100.0, &adc_chars) * voltageDividerTransformation; // in mV
+                    extVoltage /= 1000.0;
+                } else {
+                    extVoltage = ((((sampleSum/100.0)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
                }
            #else
-                sample = analogRead(Config.battery.externalVoltagePin);
+                extVoltage = ((((sampleSum/100.0)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
            #endif
-            sampleSum += sample;
-            delayMicroseconds(50);
-        }
+            
+            return extVoltage; // raw voltage without mapping

-        float extVoltage;
-        #ifdef HAS_ADC_CALIBRATION
-            if (calibrationEnable){
-                extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars) * voltageDividerTransformation; // in mV
-                extVoltage /= 1000;
-            } else {
-                extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
+            // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
+        } else if (externalI2CSensorType == 1) { // INA219
+            int sampleSum = 0;
+            for (int i = 0; i < 100; i++) {
+                sampleSum += ina219.getBusVoltage_V() * 1000.0;
+                delayMicroseconds(50);
            }
-        #else
-            extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
-        #endif
-        
-        return extVoltage; // raw voltage without mapping
-
-        // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
+            float extVoltage = sampleSum/100.0;
+            return extVoltage/1000.0;
+        } else {
+            return 0.0;
+        }
    }

    void startupBatteryHealth() {
--- a/src/configuration.cpp
+++ b/src/configuration.cpp
@@ -111,11 +111,12 @@ bool Configuration::writeFile() {
        data["battery"]["internalSleepVoltage"]     = battery.internalSleepVoltage;

        data["battery"]["sendExternalVoltage"]      = battery.sendExternalVoltage;
-        data["battery"]["externalVoltagePin"]       = battery.externalVoltagePin;
        data["battery"]["monitorExternalVoltage"]   = battery.monitorExternalVoltage;
        data["battery"]["externalSleepVoltage"]     = battery.externalSleepVoltage;
+        data["battery"]["useExternalI2CSensor"]     = battery.useExternalI2CSensor;
        data["battery"]["voltageDividerR1"]         = battery.voltageDividerR1;
        data["battery"]["voltageDividerR2"]         = battery.voltageDividerR2;
+        data["battery"]["externalVoltagePin"]       = battery.externalVoltagePin;

        data["battery"]["sendVoltageAsTelemetry"]   = battery.sendVoltageAsTelemetry;

@@ -289,7 +290,11 @@ bool Configuration::readFile() {
        if (!data["display"].containsKey("alwaysOn") ||
            !data["display"].containsKey("timeout") ||
            !data["display"].containsKey("turn180")) needsRewrite = true;
-        display.alwaysOn                = data["display"]["alwaysOn"] | true;
+        #ifdef HAS_EPAPER
+            display.alwaysOn            = true;
+        #else
+            display.alwaysOn            = data["display"]["alwaysOn"] | true;
+        #endif
        display.timeout                 = data["display"]["timeout"] | 4;
        display.turn180                 = data["display"]["turn180"] | false;

@@ -297,21 +302,23 @@ bool Configuration::readFile() {
            !data["battery"].containsKey("monitorInternalVoltage") ||
            !data["battery"].containsKey("internalSleepVoltage") ||
            !data["battery"].containsKey("sendExternalVoltage") ||
-            !data["battery"].containsKey("externalVoltagePin") ||
            !data["battery"].containsKey("monitorExternalVoltage") ||
            !data["battery"].containsKey("externalSleepVoltage") ||
+            !data["battery"].containsKey("useExternalI2CSensor") ||
            !data["battery"].containsKey("voltageDividerR1") ||
            !data["battery"].containsKey("voltageDividerR2") ||
+            !data["battery"].containsKey("externalVoltagePin") ||
            !data["battery"].containsKey("sendVoltageAsTelemetry")) needsRewrite = true;
        battery.sendInternalVoltage     = data["battery"]["sendInternalVoltage"] | false;
        battery.monitorInternalVoltage  = data["battery"]["monitorInternalVoltage"] | false;
        battery.internalSleepVoltage    = data["battery"]["internalSleepVoltage"] | 2.9;
        battery.sendExternalVoltage     = data["battery"]["sendExternalVoltage"] | false;
-        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"] | 34;
        battery.monitorExternalVoltage  = data["battery"]["monitorExternalVoltage"] | false;
        battery.externalSleepVoltage    = data["battery"]["externalSleepVoltage"] | 10.9;
+        battery.useExternalI2CSensor    = data["battery"]["useExternalI2CSensor"] | false;
        battery.voltageDividerR1        = data["battery"]["voltageDividerR1"] | 100.0;
        battery.voltageDividerR2        = data["battery"]["voltageDividerR2"] | 27.0;
+        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"] | 34;
        battery.sendVoltageAsTelemetry  = data["battery"]["sendVoltageAsTelemetry"] | false;

        if (!data["wxsensor"].containsKey("active") ||
@@ -479,11 +486,12 @@ void Configuration::setDefaultValues() {
    battery.internalSleepVoltage    = 2.9;

    battery.sendExternalVoltage     = false;
-    battery.externalVoltagePin      = 34;
    battery.monitorExternalVoltage  = false;
    battery.externalSleepVoltage    = 10.9;
+    battery.useExternalI2CSensor    = false;
    battery.voltageDividerR1        = 100.0;
    battery.voltageDividerR2        = 27.0;
+    battery.externalVoltagePin      = 34;

    battery.sendVoltageAsTelemetry  = false;

--- a/src/display.cpp
+++ b/src/display.cpp
@@ -47,9 +47,13 @@
            #ifdef HELTEC_WP_V1
                EInkDisplay_WirelessPaperV1_1 display;
            #endif
-            /*#ifdef HELTEC_WP_V1_2         // SOON!
+            #ifdef HELTEC_WP_V1_2
                EInkDisplay_WirelessPaperV1_2 display;
-            #endif*/
+            #endif
+            #ifdef HELTEC_VM_E290
+                EInkDisplay_VisionMasterE290 display;
+            #endif
+
            String lastEpaperText;
        #else
            #include <Adafruit_GFX.h>
@@ -88,15 +92,22 @@ void displaySetup() {
            tft.setTextFont(0);
            tft.fillScreen(TFT_BLACK);
            #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
-                sprite.createSprite(320,240);
+                sprite.createSprite(320, 240);
            #else
-                sprite.createSprite(160,80);
+                sprite.createSprite(160, 80);
            #endif
        #else
            #ifdef HAS_EPAPER
                display.landscape();
                display.printCenter("LoRa APRS iGate Initialising...");
-                if (Config.display.turn180) display.setRotation(2);
+                if (Config.display.turn180) {
+                    #if defined(HELTEC_VM_E290) || defined(HELTEC_WP_V1)
+                        display.setRotation(3);
+                    #endif
+                    #if defined(HELTEC_WP_V1_2)
+                        display.setRotation(1);
+                    #endif
+                }
                display.update();
            #else
                #ifdef OLED_DISPLAY_HAS_RST_PIN
@@ -158,7 +169,6 @@ void displayToggle(bool toggle) {
                digitalWrite(TFT_BL, LOW);
            #else
                #ifdef HAS_EPAPER
-                    display.printCenter("Enabled EPAPER Display...");
                    display.update();
                #else
                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
@@ -196,7 +206,7 @@ void displayShow(const String& header, const String& line1, const String& line2,
                sprite.drawString(*lines[i], 3, (lineSpacing * (2 + i)) - 2);
            }

-            sprite.pushSprite(0,0);
+            sprite.pushSprite(0, 0);
        #else
            #ifdef HAS_EPAPER
                display.clearMemory();
@@ -261,7 +271,7 @@ void displayShow(const String& header, const String& line1, const String& line2,
                sprite.drawString(*lines[i], 3, (lineSpacing * (2 + i)) - 2);
            }

-            sprite.pushSprite(0,0);
+            sprite.pushSprite(0, 0);
        #else
            #ifdef HAS_EPAPER
                lastEpaperText = header + line1 + line2 + line3 + line4 + line5 + line6;
--- a/src/gps_utils.cpp
+++ b/src/gps_utils.cpp
@@ -138,30 +138,37 @@ namespace GPS_Utils {

    String getDistanceAndComment(const String& packet) {
        int indexOfAt = packet.indexOf(":@");
-        if (indexOfAt > 10) {
-            return getReceivedGPS(packet);
-        } else {
-            const uint8_t ENCODED_BYTE_OFFSET = 14;     // Offset for encoded data in the packet
-            int indexOfExclamation  = packet.indexOf(":!");
-            int indexOfEqual        = packet.indexOf(":=");
-            uint8_t encodedBytePosition = 0;
-            if (indexOfExclamation > 10) {              // Determine the position where encoded data starts
-                encodedBytePosition = indexOfExclamation + ENCODED_BYTE_OFFSET;
-            } else if (indexOfEqual > 10) {
-                encodedBytePosition = indexOfEqual + ENCODED_BYTE_OFFSET;
-            }
+        if (indexOfAt > 10) return getReceivedGPS(packet);

-            if (encodedBytePosition != 0) {
-                char currentChar = packet[encodedBytePosition];
-                if (currentChar == 'G' || currentChar == 'Q' || currentChar == '[' || currentChar == 'H' || currentChar == 'X') {
-                    return decodeEncodedGPS(packet);    // If valid encoded data position is found, decode it
-                } else {
-                    return getReceivedGPS(packet);
-                }
-            } else {
-                return " _ / _ / _ ";
-            }
+        const uint8_t nonEncondedLatitudeOffset     = 9;    // "N" / "S"
+        const uint8_t nonEncondedLongitudeOffset    = 19;   // "E" / "W"
+        const uint8_t encondedByteOffset            = 14;
+        
+        int indexOfExclamation  = packet.indexOf(":!");
+        int indexOfEqual        = packet.indexOf(":=");
+        int baseIndex           = - 1;
+        if (indexOfExclamation > 10) {
+            baseIndex = indexOfExclamation;
+        } else if (indexOfEqual > 10) {
+            baseIndex = indexOfEqual;
        }
+        if (baseIndex == -1) return " _ / _ / _ ";
+
+        int latitudeIndex       = baseIndex + nonEncondedLatitudeOffset;
+        int longitudeIndex      = baseIndex + nonEncondedLongitudeOffset;
+        int encondedByteIndex   = baseIndex + encondedByteOffset;
+        int packetLength        = packet.length();
+
+        if (latitudeIndex >= packetLength || longitudeIndex >= packetLength || encondedByteIndex >= packetLength) return " _ / _ / _ ";
+
+        char latChar = packet[latitudeIndex];
+        char lngChar = packet[longitudeIndex];
+        if ((latChar == 'N' || latChar == 'S') && (lngChar == 'E' || lngChar == 'W')) return getReceivedGPS(packet);
+        
+        char byteChar = packet[encondedByteIndex];
+        if (byteChar == 'G' || byteChar == 'Q' || byteChar == '[' || byteChar == 'H' || byteChar == 'X' || byteChar == '3') return decodeEncodedGPS(packet);
+
+        return " _ / _ / _ ";
    }

    void setup() {
--- a/src/lora_utils.cpp
+++ b/src/lora_utils.cpp
@@ -93,6 +93,16 @@ namespace LoRa_Utils {
        #if defined(HAS_SX1278) || defined(HAS_SX1276)
            radio.setDio0Action(setFlag, RISING);
        #endif
+
+        /*#ifdef SX126X_DIO3_TCXO_VOLTAGE
+            if (radio.setTCXO(float(SX126X_DIO3_TCXO_VOLTAGE)) == RADIOLIB_ERR_NONE) {
+                Utils::println("Set LoRa Module TCXO Voltage to:" + String(SX126X_DIO3_TCXO_VOLTAGE));
+            } else {
+                Utils::println("Set LoRa Module TCXO Voltage failed! State: " + String(state));
+                while (true);
+        }
+         #endif*/
+         
        radio.setSpreadingFactor(Config.loramodule.rxSpreadingFactor);
        radio.setCodingRate(Config.loramodule.rxCodingRate4);
        float signalBandwidth = Config.loramodule.rxSignalBandwidth/1000;
@@ -103,6 +113,11 @@ namespace LoRa_Utils {
            radio.setRfSwitchPins(RADIO_RXEN, RADIO_TXEN);
        #endif

+        /*#ifdef SX126X_DIO2_AS_RF_SWITCH
+        radio.setRfSwitchPins(RADIO_RXEN, RADIOLIB_NC);
+        radio.setDio2AsRfSwitch(true);
+        #endif*/
+
        #ifdef HAS_1W_LORA  // Ebyte E22 400M30S (SX1268) / 900M30S (SX1262) / Ebyte E220 400M30S (LLCC68)
            state = radio.setOutputPower(Config.loramodule.power); // max value 20dB for 1W modules as they have Low Noise Amp
            radio.setCurrentLimit(140); // to be validated (100 , 120, 140)?
@@ -120,6 +135,13 @@ namespace LoRa_Utils {
            radio.setRxBoostedGainMode(true);
        #endif

+        #if defined(HAS_TCXO) && !defined(HAS_1W_LORA)
+            radio.setDio2AsRfSwitch();
+        #endif
+        #ifdef HAS_TCXO
+            radio.setTCXO(1.8);
+        #endif
+
        if (state == RADIOLIB_ERR_NONE) {
            Utils::println("init : LoRa Module    ...     done!");
        } else {
--- a/src/ntp_utils.cpp
+++ b/src/ntp_utils.cpp
@@ -45,7 +45,7 @@ namespace NTP_Utils {
    }

    String getFormatedTime() {
-        if (Config.digi.ecoMode == 0) return timeClient->getFormattedTime();
+        if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0) return timeClient->getFormattedTime();
        return "DigiEcoMode Active";
    }

--- a/src/power_utils.cpp
+++ b/src/power_utils.cpp
@@ -49,19 +49,19 @@ namespace POWER_Utils {

    #ifdef VEXT_CTRL
        void vext_ctrl_ON() {
-            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3)
+            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3) || defined(HELTEC_VM_E290)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? LOW : HIGH);
            #endif
-            #if defined(HELTEC_WP_V1) || defined(HELTEC_WS) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3)
+            #if defined(HELTEC_WP_V1) || defined(HELTEC_WP_V1_2) || defined(HELTEC_WS) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? HIGH : LOW);
            #endif
        }

        void vext_ctrl_OFF() {
-            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3)
+            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3) || defined(HELTEC_VM_E290)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? HIGH : LOW);
            #endif
-            #if defined(HELTEC_WP_V1) || defined(HELTEC_WS) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3)
+            #if defined(HELTEC_WP_V1) || defined(HELTEC_WP_V1_2) || defined(HELTEC_WS) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? LOW : HIGH);
            #endif
        }
@@ -70,19 +70,19 @@ namespace POWER_Utils {

    #ifdef ADC_CTRL
        void adc_ctrl_ON() {
-            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2)
+            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2) || defined(HELTEC_VM_E290)
                digitalWrite(ADC_CTRL, HIGH);
            #endif
-            #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP_V1)
+            #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP_V1) || defined(HELTEC_WP_V1_2)
                digitalWrite(ADC_CTRL, LOW);
            #endif
        }

        void adc_ctrl_OFF() {
-            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2)
+            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2) || defined(HELTEC_VM_E290)
                digitalWrite(ADC_CTRL, LOW);
            #endif
-            #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP_V1)
+            #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP_V1) || defined(HELTEC_WP_V1_2)
                digitalWrite(ADC_CTRL, HIGH);
            #endif
        }
--- a/src/telemetry_utils.cpp
+++ b/src/telemetry_utils.cpp
@@ -122,7 +122,7 @@ namespace TELEMETRY_Utils {
        telemetryCounter++;
        if (telemetryCounter == 1000) telemetryCounter = 0;
        if (Config.battery.sendInternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkInternalVoltage(), false, 0);
-        if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkExternalVoltage(), false, 1);
+        if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkExternalVoltage(), false, Config.battery.useExternalI2CSensor ? 0 : 1);
        telemetry += "|";
        return telemetry;
    }
--- a/src/utils.cpp
+++ b/src/utils.cpp
@@ -158,6 +158,8 @@ namespace Utils {

            showActiveStations();

+            beaconPacket            = iGateBeaconPacket;
+            secondaryBeaconPacket   = iGateLoRaBeaconPacket;
            #ifdef HAS_GPS
                if (Config.beacon.gpsActive && Config.digi.ecoMode == 0) {
                    GPS_Utils::getData();
@@ -176,9 +178,6 @@ namespace Utils {
                        secondaryBeaconPacket   += encodedGPS;
                    }
                }
-            #else
-                beaconPacket            = iGateBeaconPacket;
-                secondaryBeaconPacket   = iGateLoRaBeaconPacket;
            #endif

            if (Config.wxsensor.active) {
--- a/src/web_utils.cpp
+++ b/src/web_utils.cpp
@@ -228,6 +228,9 @@ namespace WEB_Utils {
        }

        Config.battery.sendExternalVoltage          = request->hasParam("battery.sendExternalVoltage", true);
+        if (Config.battery.sendExternalVoltage) {
+            Config.battery.useExternalI2CSensor     = request->hasParam("battery.useExternalI2CSensor", true);
+        }
        if (Config.battery.sendExternalVoltage) {
            Config.battery.externalVoltagePin       = getParamIntSafe("battery.externalVoltagePin", Config.battery.externalVoltagePin);
            Config.battery.voltageDividerR1         = getParamFloatSafe("battery.voltageDividerR1", Config.battery.voltageDividerR1);
--- a/src/wifi_utils.cpp
+++ b/src/wifi_utils.cpp
@@ -132,7 +132,7 @@ namespace WIFI_Utils {
            digitalWrite(INTERNAL_LED_PIN,LOW);
        #endif
        if (WiFi.status() == WL_CONNECTED) {
-            Serial.print("Connected as ");
+            Serial.print("\nConnected as ");
            Serial.print(WiFi.localIP());
            Serial.print(" / MAC Address: ");
            Serial.println(WiFi.macAddress());
--- a/src/wx_utils.cpp
+++ b/src/wx_utils.cpp
@@ -42,6 +42,7 @@ float newHum, newTemp, newPress, newGas;


 Adafruit_BME280     bme280;
+Adafruit_AHTX0      aht20; 
 #if defined(HELTEC_V3) || defined(HELTEC_V3_2)
 Adafruit_BMP280     bmp280(&Wire1);
 Adafruit_Si7021     si7021  = Adafruit_Si7021();
@@ -119,15 +120,19 @@ namespace WX_Utils {
                            Serial.println("BMP280 sensor found");
                            wxModuleType    = 2;
                            wxModuleFound   = true;
+                            if (aht20.begin()) {
+                                Serial.println("AHT20 sensor found");
+                                if (wxModuleType == 2) wxModuleType = 6;
+                            }
                        }
                    }
-                } else if (wxModuleAddress == 0x40) {
+                } else if (wxModuleAddress == 0x40 && Config.battery.useExternalI2CSensor == false) {
                    if(si7021.begin()) {
                        Serial.println("Si7021 sensor found");
                        wxModuleType    = 4;
                        wxModuleFound   = true;
                    }
-                } 
+                }
                #ifdef LIGHTGATEWAY_PLUS_1_0
                else if (wxModuleAddress == 0x70) {
                    if (shtc3.begin()) {
@@ -265,15 +270,27 @@ namespace WX_Utils {
                newPress    = 0;
                break;
            case 5: // SHTC3
-                #ifdef LIGHTGATEWAY_PLUS_1_0
-                    sensors_event_t humidity, temp;
-                    shtc3.getEvent(&humidity, &temp);
-                    newTemp     = temp.temperature;
-                    newHum      = humidity.relative_humidity;
-                    newPress    = 0;
-                #endif
+                {
+                    #ifdef LIGHTGATEWAY_PLUS_1_0
+                        sensors_event_t humidity, temp;
+                        shtc3.getEvent(&humidity, &temp);
+                        newTemp     = temp.temperature;
+                        newHum      = humidity.relative_humidity;
+                        newPress    = 0;
+                    #endif
+                }
                break;
-        }    
+            case 6: // BMP280 + AHT20
+                {
+                    bmp280.takeForcedMeasurement();
+                    newTemp     = bmp280.readTemperature();
+                    newPress    = (bmp280.readPressure() / 100.0F);
+                    sensors_event_t humidity, temp;
+                    aht20.getEvent(&humidity, &temp);
+                    newHum      = humidity.relative_humidity;
+                }
+                break;
+        }

        if (isnan(newTemp) || isnan(newHum) || isnan(newPress)) {
            Serial.println("BME/BMP/Si7021 Module data failed");
@@ -281,16 +298,16 @@ namespace WX_Utils {
            return ".../...g...t...";
        } else {
            String tempStr = generateTempString(((newTemp + Config.wxsensor.temperatureCorrection) * 1.8) + 32);
-            
+
            String humStr;
-            if (wxModuleType == 1 || wxModuleType == 3 || wxModuleType == 4 || wxModuleType == 5) {
+            if (wxModuleType == 1 || wxModuleType == 3 || wxModuleType == 4 || wxModuleType == 5 || wxModuleType == 6) {
                humStr  = generateHumString(newHum);
            } else if (wxModuleType == 2) {
                humStr  = "..";
            }
-            
+
            String presStr = (wxModuleType == 4 || wxModuleType == 5) 
-                ? "....." 
+                ? "....."
                : generatePresString(newPress + getAltitudeCorrection() / CORRECTION_FACTOR);

            fifthLine = "BME-> ";
--- a/variants/ESP32_C3_OctopusLab_LoRa/platformio.ini
+++ b/variants/ESP32_C3_OctopusLab_LoRa/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_C3_OctopusLab_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_1W_LoRa/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1268
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          18
    #define RADIO_MISO_PIN          19
    #define RADIO_MOSI_PIN          23
--- a/variants/ESP32_DIY_1W_LoRa/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_1W_LoRa_915/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa_915/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1262
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          18
    #define RADIO_MISO_PIN          19
    #define RADIO_MOSI_PIN          23
--- a/variants/ESP32_DIY_1W_LoRa_915/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_915/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_1W_LoRa_LLCC68/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_LLCC68/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa_LLCC68
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa_Mesh_V1_2
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_LoRa/platformio.ini
+++ b/variants/ESP32_DIY_LoRa/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_LoRa_915/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_915/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_LoRa_A7670/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_A7670/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_A7670
 lib_deps =
 	${common.lib_deps}
--- a/variants/ESP32_DIY_LoRa_A7670_915/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_A7670_915/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_A7670_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/LoRaHAM_V2/platformio.ini
+++ b/variants/LoRaHAM_V2/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LoRaHAM_V2
 lib_deps =
 	${common.lib_deps}
--- a/variants/OE5HWN_MeshCom/board_pinout.h
+++ b/variants/OE5HWN_MeshCom/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1268
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          18
    #define RADIO_MISO_PIN          19
    #define RADIO_MOSI_PIN          23
--- a/variants/OE5HWN_MeshCom/platformio.ini
+++ b/variants/OE5HWN_MeshCom/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D OE5HWN_MeshCom
 lib_deps =
 	${common.lib_deps}
--- a/variants/QRPLabs_LightGateway_1_0/platformio.ini
+++ b/variants/QRPLabs_LightGateway_1_0/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LIGHTGATEWAY_1_0
 lib_deps =
 	${common.lib_deps}
--- a/variants/QRPLabs_LightGateway_Plus_1_0/board_pinout.h
+++ b/variants/QRPLabs_LightGateway_Plus_1_0/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1268
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_VCC_PIN           21
    #define RADIO_SCLK_PIN          12
    #define RADIO_MISO_PIN          13
--- a/variants/QRPLabs_LightGateway_Plus_1_0/platformio.ini
+++ b/variants/QRPLabs_LightGateway_Plus_1_0/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LIGHTGATEWAY_PLUS_1_0
 lib_deps =
 	${common.lib_deps}
--- a/variants/TROY_LoRa_APRS/platformio.ini
+++ b/variants/TROY_LoRa_APRS/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TROY_LoRa_APRS
 lib_deps =
 	${common.lib_deps}
--- a/variants/WEMOS-D1-R32-RA02/platformio.ini
+++ b/variants/WEMOS-D1-R32-RA02/platformio.ini
@@ -2,6 +2,9 @@
 board = wemos_d1_uno32
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_D1_R32_RA02
 lib_deps =
 	${common.lib_deps}
--- a/variants/WEMOS-LOLIN32-OLED-DIY/platformio.ini
+++ b/variants/WEMOS-LOLIN32-OLED-DIY/platformio.ini
@@ -2,6 +2,9 @@
 board = lolin32
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_LOLIN32_OLED_DIY_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/WEMOS_S2_MINI_DIY_LoRa/platformio.ini
+++ b/variants/WEMOS_S2_MINI_DIY_LoRa/platformio.ini
@@ -2,6 +2,9 @@
 board = lolin_s2_mini
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_S2_MINI_DIY_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/XIAO_ESP32S3_WIO_SX1262/board_pinout.h
+++ b/variants/XIAO_ESP32S3_WIO_SX1262/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN      7
    #define RADIO_MISO_PIN      8
    #define RADIO_MOSI_PIN      9
--- a/variants/XIAO_ESP32S3_WIO_SX1262/platformio.ini
+++ b/variants/XIAO_ESP32S3_WIO_SX1262/platformio.ini
@@ -3,6 +3,9 @@ board = seeed_xiao_esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D XIAO_ESP32S3_LORA
 lib_deps =
 	${common.lib_deps}
--- a/variants/esp32c3_DIY_1W_LoRa/board_pinout.h
+++ b/variants/esp32c3_DIY_1W_LoRa/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1268
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          8
    #define RADIO_MISO_PIN          9
    #define RADIO_MOSI_PIN          10
--- a/variants/esp32c3_DIY_1W_LoRa/platformio.ini
+++ b/variants/esp32c3_DIY_1W_LoRa/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32C3_DIY_1W_LoRa
 lib_deps =
 	${common.lib_deps}
--- a/variants/esp32c3_DIY_1W_LoRa_915/board_pinout.h
+++ b/variants/esp32c3_DIY_1W_LoRa_915/board_pinout.h
@@ -22,6 +22,7 @@
    //  LoRa Radio
    #define HAS_SX1262
    #define HAS_1W_LORA
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          8
    #define RADIO_MISO_PIN          9
    #define RADIO_MOSI_PIN          10
--- a/variants/esp32c3_DIY_1W_LoRa_915/platformio.ini
+++ b/variants/esp32c3_DIY_1W_LoRa_915/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32C3_DIY_1W_LoRa_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec-lora32-v2/platformio.ini
+++ b/variants/heltec-lora32-v2/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V2
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_ht-ct62/board_pinout.h
+++ b/variants/heltec_ht-ct62/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          10
    #define RADIO_MISO_PIN          6
    #define RADIO_MOSI_PIN          7
--- a/variants/heltec_ht-ct62/platformio.ini
+++ b/variants/heltec_ht-ct62/platformio.ini
@@ -3,6 +3,9 @@ board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_HTCT62
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_vision_master_e290/board_pinout.h
+++ b/variants/heltec_vision_master_e290/board_pinout.h
@@ -0,0 +1,56 @@
+/* Copyright (C) 2025 Ricardo Guzman - CA2RXU
+ * 
+ * This file is part of LoRa APRS iGate.
+ * 
+ * LoRa APRS iGate is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or 
+ * (at your option) any later version.
+ * 
+ * LoRa APRS iGate is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with LoRa APRS iGate. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define HAS_TCXO
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
+
+    //  I2C
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           39
+    #define BOARD_I2C_SCL           38
+
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_EPAPER
+    #define EPAPER_BUSY             6
+    #define EPAPER_RST              5
+    #define EPAPER_DC               4
+    #define EPAPER_CS               3
+    #define EPAPER_SCL              2
+    #define EPAPER_SDA              1
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        45
+    #define BATTERY_PIN             7
+    #define ADC_CTRL                46
+    #define VEXT_CTRL               18
+
+#endif
--- a/variants/heltec_vision_master_e290/platformio.ini
+++ b/variants/heltec_vision_master_e290/platformio.ini
@@ -0,0 +1,13 @@
+[env:heltec_vision_master_e290]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
+	-D HELTEC_VM_E290
+	-D Vision_Master_E290
+lib_deps =
+	${common.lib_deps}
+	https://github.com/todd-herbert/heltec-eink-modules.git
--- a/variants/heltec_wifi_lora_32_V3/board_pinout.h
+++ b/variants/heltec_wifi_lora_32_V3/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wifi_lora_32_V3/platformio.ini
+++ b/variants/heltec_wifi_lora_32_V3/platformio.ini
@@ -3,6 +3,9 @@ board = heltec_wifi_lora_32_V3
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V3
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wifi_lora_32_V3_2/board_pinout.h
+++ b/variants/heltec_wifi_lora_32_V3_2/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wifi_lora_32_V3_2/platformio.ini
+++ b/variants/heltec_wifi_lora_32_V3_2/platformio.ini
@@ -3,6 +3,9 @@ board = heltec_wifi_lora_32_V3
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V3_2
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wireless_bridge/platformio.ini
+++ b/variants/heltec_wireless_bridge/platformio.ini
@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WIRELESS_BRIDGE
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wireless_paper_v1/board_pinout.h
+++ b/variants/heltec_wireless_paper_v1/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/heltec_wireless_paper_v1/platformio.ini
@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WP_V1
 	-D WIRELESS_PAPER
 lib_deps =
--- a/variants/heltec_wireless_paper_v1_2/board_pinout.h
+++ b/variants/heltec_wireless_paper_v1_2/board_pinout.h
@@ -0,0 +1,56 @@
+/* Copyright (C) 2025 Ricardo Guzman - CA2RXU
+ * 
+ * This file is part of LoRa APRS iGate.
+ * 
+ * LoRa APRS iGate is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or 
+ * (at your option) any later version.
+ * 
+ * LoRa APRS iGate is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with LoRa APRS iGate. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define HAS_TCXO
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
+
+    //  I2C
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           37
+    #define BOARD_I2C_SCL           36
+
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_EPAPER
+    #define EPAPER_BUSY             7
+    #define EPAPER_RST              6
+    #define EPAPER_DC               5
+    #define EPAPER_CS               4
+    #define EPAPER_SCL              3
+    #define EPAPER_SDA              2
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        18
+    #define BATTERY_PIN             20
+    #define ADC_CTRL                19
+    #define VEXT_CTRL               45
+
+#endif
--- a/variants/heltec_wireless_paper_v1_2/platformio.ini
+++ b/variants/heltec_wireless_paper_v1_2/platformio.ini
@@ -0,0 +1,14 @@
+[env:heltec_wireless_paper_v1_2]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
+	-D HELTEC_WP_V1_2
+	-D WIRELESS_PAPER
+	-D V1_2
+lib_deps =
+	${common.lib_deps}
+	https://github.com/todd-herbert/heltec-eink-modules.git
--- a/variants/heltec_wireless_stick/board_pinout.h
+++ b/variants/heltec_wireless_stick/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wireless_stick/platformio.ini
+++ b/variants/heltec_wireless_stick/platformio.ini
@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WS
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wireless_stick_lite_v3/board_pinout.h
+++ b/variants/heltec_wireless_stick_lite_v3/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wireless_stick_lite_v3/platformio.ini
+++ b/variants/heltec_wireless_stick_lite_v3/platformio.ini
@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WSL_V3
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wireless_stick_lite_v3_display/board_pinout.h
+++ b/variants/heltec_wireless_stick_lite_v3_display/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9
    #define RADIO_MISO_PIN          11
    #define RADIO_MOSI_PIN          10
--- a/variants/heltec_wireless_stick_lite_v3_display/platformio.ini
+++ b/variants/heltec_wireless_stick_lite_v3_display/platformio.ini
@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WSL_V3_DISPLAY
 lib_deps =
 	${common.lib_deps}
--- a/variants/heltec_wireless_tracker/board_pinout.h
+++ b/variants/heltec_wireless_tracker/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          9       // SX1262 SCK
    #define RADIO_MISO_PIN          11      // SX1262 MISO
    #define RADIO_MOSI_PIN          10      // SX1262 MOSI
--- a/variants/heltec_wireless_tracker/platformio.ini
+++ b/variants/heltec_wireless_tracker/platformio.ini
@@ -27,6 +27,9 @@ build_flags =
 	-D LOAD_FONT8
 	-D SPI_FREQUENCY=27000000
 	-D USE_HSPI_PORT
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43
--- a/variants/ttgo-lora32-v21/platformio.ini
+++ b/variants/ttgo-lora32-v21/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_LORA32_V2_1
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-lora32-v21_915/platformio.ini
+++ b/variants/ttgo-lora32-v21_915/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_LORA32_V2_1_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1/platformio.ini
+++ b/variants/ttgo-t-beam-v1/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1_2/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1_2_915/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2_915/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1_2_SX1262/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_2_SX1262/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          5
    #define RADIO_MISO_PIN          19
    #define RADIO_MOSI_PIN          27
--- a/variants/ttgo-t-beam-v1_2_SX1262/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2_SX1262/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2_SX1262
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1_915/platformio.ini
+++ b/variants/ttgo-t-beam-v1_915/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0_915
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo-t-beam-v1_SX1268/platformio.ini
+++ b/variants/ttgo-t-beam-v1_SX1268/platformio.ini
@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0_SX1268
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo_lora32_t3s3_v1_2/board_pinout.h
+++ b/variants/ttgo_lora32_t3s3_v1_2/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          5
    #define RADIO_MISO_PIN          3
    #define RADIO_MOSI_PIN          6
--- a/variants/ttgo_lora32_t3s3_v1_2/platformio.ini
+++ b/variants/ttgo_lora32_t3s3_v1_2/platformio.ini
@@ -5,6 +5,9 @@ board_upload.flash_size = 4MB
 build_flags =
    ${common.build_flags}
 	${common.usb_flags}
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
    -D TTGO_LORA32_T3S3_V1_2
 lib_deps =
 	${common.lib_deps}
--- a/variants/ttgo_t_beam_s3_SUPREME_v3/board_pinout.h
+++ b/variants/ttgo_t_beam_s3_SUPREME_v3/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          12
    #define RADIO_MISO_PIN          13
    #define RADIO_MOSI_PIN          11
--- a/variants/ttgo_t_beam_s3_SUPREME_v3/platformio.ini
+++ b/variants/ttgo_t_beam_s3_SUPREME_v3/platformio.ini
@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
    -D TTGO_T_Beam_S3_SUPREME_V3
 lib_deps =
  	${common.lib_deps}
--- a/variants/ttgo_t_deck_GPS/board_pinout.h
+++ b/variants/ttgo_t_deck_GPS/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          40
    #define RADIO_MISO_PIN          38
    #define RADIO_MOSI_PIN          41
--- a/variants/ttgo_t_deck_GPS/platformio.ini
+++ b/variants/ttgo_t_deck_GPS/platformio.ini
@@ -44,6 +44,9 @@ build_flags =
    -D LOAD_FONT8
    -D SPI_FREQUENCY=40000000
    -D SPI_READ_FREQUENCY=16000000
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43
--- a/variants/ttgo_t_deck_plus/board_pinout.h
+++ b/variants/ttgo_t_deck_plus/board_pinout.h
@@ -21,6 +21,7 @@

    //  LoRa Radio
    #define HAS_SX1262
+    #define HAS_TCXO
    #define RADIO_SCLK_PIN          40
    #define RADIO_MISO_PIN          38
    #define RADIO_MOSI_PIN          41
--- a/variants/ttgo_t_deck_plus/platformio.ini
+++ b/variants/ttgo_t_deck_plus/platformio.ini
@@ -44,6 +44,9 @@ build_flags =
    -D LOAD_FONT8
    -D SPI_FREQUENCY=40000000
    -D SPI_READ_FREQUENCY=16000000
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43
Author	SHA1	Message	Date
Ricardo Guzman (Richonguzman)	ff8c7581fa	gps payload decoding fix	2025-12-28 10:06:34 -03:00
Ricardo Guzman (Richonguzman)	449a8557d2	definition fix for VisionMaster	2025-12-23 08:32:06 -03:00
Ricardo Guzman (Richonguzman)	4419c98920	Merge pull request #375 from richonguzman/richonguzman-patch-16 added Heltec VisionMaster E290 and WirelessPaper V1.2	2025-12-22 23:02:46 -03:00
Ricardo Guzman (Richonguzman)	45bf90817b	added Heltec VisionMaster E290 and WirelessPaper V1.2	2025-12-22 22:59:21 -03:00
Ricardo Guzman (Richonguzman)	ef30a1bf58	readme update	2025-12-22 21:34:58 -03:00
Ricardo Guzman (Richonguzman)	9a705d3dfa	Heltec Wireless Paper V1.2 added	2025-12-22 21:29:50 -03:00
Ricardo Guzman (Richonguzman)	63f74396d2	Heltec Vision Master update	2025-12-22 21:15:03 -03:00
Ricardo Guzman (Richonguzman)	400b77c2d3	date update	2025-12-22 19:57:18 -03:00
Ricardo Guzman (Richonguzman)	31daddf917	invalid Passcode non blocking fix	2025-12-22 19:56:15 -03:00
Ricardo Guzman (Richonguzman)	529a44018f	readme and version update	2025-12-18 09:47:56 -03:00
Ricardo Guzman (Richonguzman)	5ba9c5b382	test	2025-12-18 09:28:56 -03:00
Ricardo Guzman (Richonguzman)	c7a0e3773b	ina bme update	2025-12-14 05:53:43 -03:00
Ricardo Guzman (Richonguzman)	a5f9e5b844	typo TCXO fix	2025-12-12 12:25:41 -03:00
Ricardo Guzman (Richonguzman)	24f407d51c	TCXO add	2025-12-12 12:24:53 -03:00
Ricardo Guzman (Richonguzman)	2c6665b557	FIX for boards with GPS onboard	2025-12-11 13:44:06 -03:00
Ricardo Guzman (Richonguzman)	38f52564f1	lib def fix	2025-12-11 10:27:29 -03:00
Ricardo Guzman (Richonguzman)	49e92c622f	README UPDATE for v3.1.5 manual	2025-12-07 08:46:45 -03:00
Ricardo Guzman (Richonguzman)	5370850ae1	update to fix ntp without wifi	2025-12-03 12:31:36 -03:00
Ricardo Guzman (Richonguzman)	984e9f9561	encoded telemetry fix for INA219	2025-12-01 19:53:14 -03:00
Ricardo Guzman (Richonguzman)	f60252ef94	fix for same declaration of variables	2025-12-01 16:02:26 -03:00
Ricardo Guzman (Richonguzman)	63257d6329	readme update	2025-12-01 13:30:37 -03:00
Ricardo Guzman (Richonguzman)	18929ad379	INA219 final test	2025-12-01 13:29:54 -03:00
Ricardo Guzman (Richonguzman)	cda901142d	INA219 3	2025-12-01 12:45:14 -03:00
Ricardo Guzman (Richonguzman)	8008143267	configuration INA219 add	2025-12-01 10:55:31 -03:00
Ricardo Guzman (Richonguzman)	3416e21a8c	ready radiolib excludes	2025-12-01 10:45:14 -03:00
Ricardo Guzman (Richonguzman)	5882b54c62	radiolib exclude start	2025-12-01 10:11:15 -03:00
Ricardo Guzman (Richonguzman)	6a4c0ef01a	readme update	2025-12-01 09:38:37 -03:00
Ricardo Guzman (Richonguzman)	0bd3201ef7	AHT20 add	2025-12-01 09:37:02 -03:00