hwt not ready

.github/workflows/build.yml

@@ -21,6 +21,8 @@ jobs:
                       chip: esp32
                     - name: heltec_wifi_lora_32_V3
                       chip: esp32s3
+                    - name: heltec_wifi_lora_32_V3_2
+                      chip: esp32s3
                     - name: heltec_wireless_stick
                       chip: esp32s3
                     - name: heltec_wireless_stick_lite_v3
@@ -51,6 +53,12 @@ jobs:
                       chip: esp32
                     - name: ttgo-t-beam-v1_2_SX1262
                       chip: esp32
+                    - name: ttgo_t_deck_plus
+                      chip: esp32s3
+                    - name: ttgo_t_deck_GPS
+                      chip: esp32s3
+                    - name: ttgo_t_beam_s3_SUPREME_v3
+                      chip: esp32s3
                     - name: ESP32_DIY_LoRa_A7670
                       chip: esp32
                     - name: ESP32_DIY_LoRa_A7670_915
@@ -77,6 +85,10 @@ jobs:
                       chip: esp32c3
                     - name: QRPLabs_LightGateway_1_0
                       chip: esp32s3
+                    - name: XIAO_ESP32S3_WIO_SX1262
+                      chip: esp32s3
+                    - name: TROY_LoRa_APRS
+                      chip: esp32                    
         steps:
             - uses: actions/checkout@v3
 

README.md

@@ -36,6 +36,8 @@ ____________________________________________________
 
 - TTGO T-Beam V1.0 , V1.1, V1.2 (also variations with SX1262 and SX1268 LoRa Modules).
 
+- T-Deck Plus (and also regular T-Deck with/without GPS).
+
 - HELTEC V2, V3 , Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker, Wireless Paper.
 
 - QRP Labs LightGateway 1.0.
@@ -52,12 +54,22 @@ ____________________________________________________
 
 ## Timeline (Versions):
 
+- 2025.03.20 Manager List added to enable/disable DigiEcoMode and Tx Control. Thanks LB5JJ.
+- 2025.03.03 T-Beam Supreme board added and more BlackList rules added.
+- 2025.02.28 Heltec Wireless Paper with Epaper working. Thanks SzymonPriv for pointing to the right library.
+- 2025.02.25 Objects Rules update, GPS Boards: Satellites on Screen, Wx Height Correction from GPS Data.
+- 2025.01.22 Added LILYGO T-DECK PLUS (and DIY+GPS version) board support.
+- 2025.01.11 Added HELTEC V3.2 board support.
+- 2025.01.07 TROY_LoRa_APRS board added. GMT in quarter hour fix and Beacon fix for TNC.
+- 2025.01.02 Callsign Black List added.
+- 2024.12.30 Fixed missing validation for correct Digipeater mode when not connected to APRS-IS.
+- 2024.12.06 APRS-IS connnection and passcode validation added.
 - 2024.11.06 (Silent Update) Working now with Board "VARIANTS".
 - 2024.10.29 Added LILYGO Lora32 T3S3 support.
 - 2024.10.25 Added QRP Labs LightGateway 1.0 support.
 - 2024.10.21 Boards with GPS can now send Real-GPS Beacon (also posible: GPS ambiguity of ~ 1 km).
 - 2024.10.14 Received Packets in WebUI show real Local Time (NTP with GMT offset).
-- 2024.10.08 New EcoMode for Remote Digipeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP and all was 150mA). APRS Message/Queries can start/stop this mode too.
+- 2024.10.08 New EcoMode for Remote Digipeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP 150mA). APRS Message/Queries can start/stop this mode too.
 - 2024.10.06 Cross Frequency Digipeater Rules added.
 - 2024.09.23 Libraries Update for SDK3
 - 2024.09.23 Added Enconded Telemetry for Battery (+ External Voltage) in Station GPS Beacon Packet. 

common_settings.ini

@@ -32,7 +32,7 @@ lib_deps =
 	arduino-libraries/NTPClient @ 3.2.1
 	ayushsharma82/ElegantOTA @ 3.1.5
 	bblanchon/ArduinoJson @ 6.21.3
-	jgromes/RadioLib @ 6.6.0
+	jgromes/RadioLib @ 7.1.0
 	mathieucarbou/AsyncTCP @ 3.2.5
 	mathieucarbou/ESPAsyncWebServer @ 3.2.3
 	mikalhart/TinyGPSPlus @ 1.0.3	

data/igate_conf.json

@@ -29,7 +29,7 @@
     },
     "digi": {
         "mode": 0,
-        "ecoMode": false
+        "ecoMode": 0
     },
     "lora": {
         "txFreq": 433775000,
@@ -56,7 +56,7 @@
         "externalSleepVoltage": 10.9,
         "voltageDividerR1": 100.0,
         "voltageDividerR2": 27.0,
-        "sendVoltageAsTelemetry": true
+        "sendVoltageAsTelemetry": false
 	},
     "wxsensor": {
         "active": false,
@@ -65,8 +65,8 @@
 	},
     "syslog": {
         "active": false,
-        "server": "192.168.0.100",
-        "port": 514
+        "server": "lora.link9.net",
+        "port": 1514
     },
     "tnc": {
         "enableServer": false,
@@ -82,15 +82,18 @@
         "password": ""
     },
     "ntp": {
-        "gmtCorrection": 0
+        "gmtCorrection": 0.0
     },
+    "remoteManagement": {
+        "managers": "",
+        "rfOnly": true
+    },        
     "other": {
         "rememberStationTime": 30,
-        "lowPowerMode": false,
-        "lowVoltageCutOff": 0,
         "backupDigiMode": false,
         "rebootMode": false,
         "rebootModeTime": 6
     },
-    "personalNote": ""
+    "personalNote": "",
+    "blacklist": ""
 }

data_embed/index.html

@@ -77,7 +77,7 @@
                             </tbody>
                         </table>
                         <span>List refresh automatically every 15 seconds.</span><br>
-                        <small>(Local Time is NPT-Time adjusted with your GMT Offset)</small>
+                        <small>(Local Time is NTP-Time adjusted with your GMT Offset)</small>
                     </div>
                 </div>
                 <hr />
@@ -573,6 +573,47 @@
                         </div>
                         <hr />
 
+                        <div class="row my-5 d-flex align-items-top">
+                            <div class="col-lg-3 col-sm-12">
+                                <h5>
+                                    <svg
+                                        xmlns="http://www.w3.org/2000/svg"
+                                        width="20"
+                                        height="20"
+                                        fill="currentColor"
+                                        class="bi bi-broadcast-pin"
+                                        viewBox="0 0 16 16"
+                                    >
+                                        <path
+                                            d="M3.05 3.05a7 7 0 0 0 0 9.9.5.5 0 0 1-.707.707 8 8 0 0 1 0-11.314.5.5 0 0 1 .707.707m2.122 2.122a4 4 0 0 0 0 5.656.5.5 0 1 1-.708.708 5 5 0 0 1 0-7.072.5.5 0 0 1 .708.708m5.656-.708a.5.5 0 0 1 .708 0 5 5 0 0 1 0 7.072.5.5 0 1 1-.708-.708 4 4 0 0 0 0-5.656.5.5 0 0 1 0-.708m2.122-2.12a.5.5 0 0 1 .707 0 8 8 0 0 1 0 11.313.5.5 0 0 1-.707-.707 7 7 0 0 0 0-9.9.5.5 0 0 1 0-.707zM6 8a2 2 0 1 1 2.5 1.937V15.5a.5.5 0 0 1-1 0V9.937A2 2 0 0 1 6 8"
+                                        />
+                                    </svg>
+                                    Black List
+                                </h5>
+                                <small>Add Callsigns with space between them to Blacklist them (* wild card allowed)</small>
+                            </div>
+                            <div class="col-9 mt-2">
+                                <div class="row">
+                                    <div class="col-12">
+                                        <label
+                                            for="blacklist"
+                                            class="form-label"
+                                            >Blacklist</label
+                                        >
+                                        <input
+                                            type="text"
+                                            name="blacklist"
+                                            id="blacklist"
+                                            class="form-control"
+                                            placeholder="Station Callsign"
+                                            oninput="this.value = this.value.toUpperCase();"
+                                        />
+                                    </div>
+                                </div>
+                            </div>
+                        </div>
+                        <hr />
+
                         <div class="row my-5 d-flex align-items-top">
                             <div class="col-lg-3 col-sm-12">
                                 <h5>
@@ -605,7 +646,9 @@
                                             name="digi.mode"
                                             id="digi.mode"
                                         >
-                                            <option value="0">off</option>
+                                            <option value="0">
+                                                OFF
+                                            </option>
                                             <option value="2">
                                                 WIDE1 (fill-in) Digi
                                             </option>
@@ -614,20 +657,27 @@
                                             </option>
                                         </select>
                                     </div>
-                                    <div class="col-12 mt-5">
-                                        <div class="form-check form-switch">
-                                            <input
-                                                type="checkbox"
-                                                name="digi.ecoMode"
-                                                id="digi.ecoMode"
-                                                class="form-check-input"
-                                            />
-                                            <label
-                                                for="digi.ecoMode"
-                                                class="form-label"
-                                                >Eco Mode<small> This will disable WiFi, Display, Leds and lower CPU Speed for Low Power Digipeater. (<strong>Caution:</strong> Active means No WebUI Configuration, so <strong>ONLY</strong> activate this for Remote Digipeater)</small></label
-                                            >
-                                        </div>
+                                    <div class="col-12 mt-3">
+                                        <label
+                                            for="digi.ecoMode"
+                                            class="form-label"
+                                            >Eco Mode</label
+                                        >
+                                        <select
+                                            class="form-select form-select"
+                                            name="digi.ecoMode"
+                                            id="digi.ecoMode"
+                                        >
+                                            <option value="0">
+                                                OFF (Normal Mode)
+                                            </option>
+                                            <option value="1">
+                                                Ultra Eco Mode (Sleep till Packet Rx (WiFiAP/WebUI & Display disabled))
+                                            </option>
+                                            <option value="2">
+                                                OFF (Normal Mode without WiFiAP)
+                                            </option>
+                                        </select>
                                     </div>
                                 </div>
                             </div>
@@ -1310,7 +1360,7 @@
                                             type="text"
                                             name="syslog.port"
                                             id="syslog.port"
-                                            placeholder="514"
+                                            placeholder="1514"
                                             class="form-control"
                                             disabled
                                         />
@@ -1667,6 +1717,65 @@
                         </div>
                         <hr />
 
+                        <div class="row my-5 d-flex align-items-top">
+                            <div class="col-lg-3 col-sm-12">
+                                <h5>
+                                    <svg
+                                        xmlns="http://www.w3.org/2000/svg"
+                                        width="20"
+                                        height="20"
+                                        fill="currentColor"
+                                        class="bi bi-cloud-upload-fill"
+                                        viewBox="0 0 16 16"
+                                    >
+                                        <path
+                                            fill-rule="evenodd"
+                                            d="M8 0a5.53 5.53 0 0 0-3.594 1.342c-.766.66-1.321 1.52-1.464 2.383C1.266 4.095 0 5.555 0 7.318 0 9.366 1.708 11 3.781 11H7.5V5.707L5.354 7.854a.5.5 0 1 1-.708-.708l3-3a.5.5 0 0 1 .708 0l3 3a.5.5 0 0 1-.708.708L8.5 5.707V11h4.188C14.502 11 16 9.57 16 7.773c0-1.636-1.242-2.969-2.834-3.194C12.923 1.999 10.69 0 8 0m-.5 14.5V11h1v3.5a.5.5 0 0 1-1 0"
+                                        />
+                                    </svg>
+                                    Remote Management
+                                </h5>
+                                <small
+                                    >Manage Station via APRS Messages. Leave empty to disable!
+                                </small>
+                            </div>
+                            <div class="col-lg-9 col-sm-12">
+                                <div class="col-12">
+                                    <label
+                                        for="remoteManagement.managers"
+                                        class="form-label"
+                                        >Callsign-SSID of Managers, space separated, trailing * wildcard allowed (ex: AB1CDE-9, AB1CDE*)</label
+                                    >
+                                    <div class="input-group">
+                                        <input
+                                            type="text"
+                                            name="remoteManagement.managers"
+                                            id="remoteManagement.managers"
+                                            class="form-control"
+                                        />
+                                    </div>
+                                </div>
+                                <div class="row">
+                                    <div class="col-12">
+                                        <div class="form-check form-switch">
+                                            <input
+                                                type="checkbox"
+                                                name="remoteManagement.rfOnly"
+                                                id="remoteManagement.rfOnly"
+                                                class="form-check-input"
+                                            />
+                                            <label
+                                                for="remoteManagement.rfOnly"
+                                                class="form-label"
+                                                >Managers commands only via RF (not APRS-IS)</label
+                                            >
+                                        </div>
+                                    </div>
+                                </div>
+                            </div>
+                        </div>
+                        <hr />
+
                         <div class="row my-5 d-flex align-items-top">
                             <div class="col-lg-3 col-sm-12">
                                 <h5>
@@ -1703,9 +1812,9 @@
                                             id="ntp.gmtCorrection"
                                             placeholder="0"
                                             class="form-control"
-                                            step="1"
-                                            min="-23"
-                                            max="23"
+                                            step="0.25"
+                                            min="-23.75"
+                                            max="23.75"
                                         />
                                         <span class="input-group-text"
                                             >hours</span
@@ -1758,46 +1867,6 @@
                                             >
                                         </div>
                                     </div>
-                                    <div class="col-12">
-                                        <div class="form-check form-switch">
-                                            <div class="form-text">
-                                                WiFi disabled. Sleep mode. Best for solar Digi with SX126X.
-                                            </div>
-                                            <input
-                                                type="checkbox"
-                                                name="other.lowPowerMode"
-                                                id="other.lowPowerMode"
-                                                class="form-check-input"
-                                            />
-                                            <label
-                                                for="other.lowPowerMode"
-                                                class="form-label"
-                                                >Low power mode (only for HT-CT62)</label
-                                            >
-                                        </div>
-                                    </div>
-                                    <div class="col-12 mt-3">
-                                        <label
-                                            for="other.lowVoltageCutOff"
-                                            class="form-label"
-                                            >Low voltage cut off <small>(Deep sleep below specific voltage)</small></label
-                                        >
-                                        <input
-                                            type="text"
-                                            name="other.lowVoltageCutOff"
-                                            id="other.lowVoltageCutOff"
-                                            placeholder="0"
-                                            min="0"
-                                            step="0.01"
-                                            class="form-control"
-                                        />
-                                        <span class="input-group-text"
-                                                >Volts</span
-                                        >
-                                        <div class="form-text">
-                                            MCU will deep sleep when below provided battery voltage to save power. Set to <strong>0</strong> if you don't want this option. <u>Please calibrate your voltage reading first!</u>
-                                        </div>
-                                    </div>
                                 </div>
                             </div>
                         </div>

data_embed/script.js

@@ -137,6 +137,9 @@ function loadSettings(settings) {
     document.getElementById("beacon.gpsActive").checked                 = settings.beacon.gpsActive;
     document.getElementById("beacon.gpsAmbiguity").checked              = settings.beacon.gpsAmbiguity;
 
+    // Black List
+    document.getElementById("blacklist").value                          = settings.blacklist;
+
     // Digi
     document.getElementById("digi.mode").value                          = settings.digi.mode;
     document.getElementById("digi.ecoMode").checked                     = settings.digi.ecoMode;
@@ -217,8 +220,9 @@ function loadSettings(settings) {
     // Experimental
     document.getElementById("other.backupDigiMode").checked             = settings.other.backupDigiMode;
 
-    document.getElementById("other.lowPowerMode").checked               = settings.other.lowPowerMode;
-    document.getElementById("other.lowVoltageCutOff").value             = settings.other.lowVoltageCutOff || 0
+    // Management over APRS
+    document.getElementById("remoteManagement.managers").value          = settings.remoteManagement.managers;
+    document.getElementById("remoteManagement.rfOnly").checked          = settings.remoteManagement.rfOnly;
 
     updateImage();
     refreshSpeedStandard();

include/README

@@ -1,39 +0,0 @@
-
-This directory is intended for project header files.
-
-A header file is a file containing C declarations and macro definitions
-to be shared between several project source files. You request the use of a
-header file in your project source file (C, C++, etc) located in `src` folder
-by including it, with the C preprocessing directive `#include'.
-
-```src/main.c
-
-#include "header.h"
-
-int main (void)
-{
- ...
-}
-```
-
-Including a header file produces the same results as copying the header file
-into each source file that needs it. Such copying would be time-consuming
-and error-prone. With a header file, the related declarations appear
-in only one place. If they need to be changed, they can be changed in one
-place, and programs that include the header file will automatically use the
-new version when next recompiled. The header file eliminates the labor of
-finding and changing all the copies as well as the risk that a failure to
-find one copy will result in inconsistencies within a program.
-
-In C, the usual convention is to give header files names that end with `.h'.
-It is most portable to use only letters, digits, dashes, and underscores in
-header file names, and at most one dot.
-
-Read more about using header files in official GCC documentation:
-
-* Include Syntax
-* Include Operation
-* Once-Only Headers
-* Computed Includes
-
-https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

include/aprs_is_utils.h

@@ -8,6 +8,7 @@ namespace APRS_IS_Utils {
 
     void    upload(const String& line);
     void    connect();
+    
     void    checkStatus();
     String  checkForStartingBytes(const String& packet);
     
@@ -19,6 +20,8 @@ namespace APRS_IS_Utils {
     void    processAPRSISPacket(const String& packet);
     void    listenAPRSIS();
 
+    void    firstConnection();
+
 }
 
 #endif

include/battery_utils.h

@@ -8,10 +8,10 @@ namespace BATTERY_Utils {
 
     void    adcCalibration();
     void    adcCalibrationCheck();
+    
     void    setup();
     float   checkInternalVoltage();
     float   checkExternalVoltage();
-    void    checkIfShouldSleep(); // ????
     void    startupBatteryHealth();
 
     String  generateEncodedTelemetryBytes(float value, bool firstBytes, byte voltageType);

include/configuration.h

@@ -47,10 +47,9 @@ public:
 class DIGI {
 public:
     int     mode;
-    bool    ecoMode;
+    int     ecoMode;        // 0 = Not Active | 1 = Ultra EcoMode | 2 = Not Active (WiFi OFF, Serial ON)
 };
 
-
 class LoraModule {
 public:
     long    txFreq;
@@ -120,21 +119,24 @@ public:
 
 class NTP {
 public:
-    int     gmtCorrection;
+    float   gmtCorrection;
 };
 
-
+class REMOTE_MANAGEMENT {
+public:
+    String  managers;
+    bool    rfOnly;
+};
 
 class Configuration {
 public:
     String                  callsign;
     int                     rememberStationTime;
-    bool                    lowPowerMode;
-    double                  lowVoltageCutOff;
     bool                    backupDigiMode;
     bool                    rebootMode;
     int                     rebootModeTime;
     String                  personalNote;
+    String                  blacklist;
     std::vector<WiFi_AP>    wifiAPs;
     WiFi_Auto_AP            wifiAutoAP;
     BEACON                  beacon;
@@ -148,7 +150,8 @@ public:
     TNC                     tnc;  
     OTA                     ota;
     WEBADMIN                webadmin;
-    NTP                     ntp;
+    NTP                     ntp;    
+    REMOTE_MANAGEMENT       remoteManagement;
   
     void init();
     void writeFile();

include/display.h

@@ -5,14 +5,9 @@
 
 #define SCREEN_ADDRESS  0x3C    ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
 
-
-void cleanTFT();
 void displaySetup();
 void displayToggle(bool toggle);
 
-bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3);
-bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6);
-
 void displayShow(const String& header, const String& line1, const String& line2, const String& line3, int wait = 0);
 void displayShow(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6, int wait = 0);
 

include/lora_utils.h

@@ -8,11 +8,12 @@ namespace LoRa_Utils {
 
     void    setup();
     void    sendNewPacket(const String& newPacket);
-    //String  packetSanitization(const String& packet);
+    String  receivePacketFromSleep();
     String  receivePacket();
     void    changeFreqTx();
     void    changeFreqRx();
-    void    startReceive();
+    void    wakeRadio();
+    //void    startReceive();
     void    sleepRadio();
 
 }

include/sleep_utils.h

@@ -0,0 +1,14 @@
+#ifndef SLEEP_UTILS_H_
+#define SLEEP_UTILS_H_
+
+#include <Arduino.h>
+
+namespace SLEEP_Utils {
+    
+    void setup();
+    void checkWakeUpFlag();
+    void startSleeping();
+
+}
+
+#endif

include/station_utils.h

@@ -18,11 +18,16 @@ struct LastHeardStation {
 
 namespace STATION_Utils {
 
+    void loadBlacklistAndManagers();
+    bool isBlacklisted(const String& callsign);
+    bool isManager(const String& callsign);
+    bool checkObjectTime(const String& packet);
     void deleteNotHeard();
     void updateLastHeard(const String& station);
     bool wasHeard(const String& station);
     void clean25SegBuffer();
     bool check25SegBuffer(const String& station, const String& textMessage);
+    void processOutputPacketBufferUltraEcoMode();
     void processOutputPacketBuffer();
     void addToOutputPacketBuffer(const String& packet);
 

platformio.ini

@@ -13,7 +13,7 @@ default_envs = ttgo-lora32-v21
 
 extra_configs =
 	common_settings.ini
-  	variants/*/platformio.ini
+	variants/*/platformio.ini
 
 [env]
 platform = espressif32 @ 6.7.0

src/A7670_utils.cpp

@@ -6,6 +6,7 @@
 #include "display.h"
 #include "utils.h"
 
+
 #ifdef HAS_A7670
     #define TINY_GSM_MODEM_SIM7600      //The AT instruction of A7670 is compatible with SIM7600 
     #define TINY_GSM_RX_BUFFER 1024     // Set RX buffer to 1Kb

src/LoRa_APRS_iGate.cpp

@@ -26,14 +26,13 @@ ___________________________________________________________________*/
 #include <WiFi.h>
 #include <vector>
 #include "configuration.h"
-#include "battery_utils.h"
 #include "aprs_is_utils.h"
 #include "station_utils.h"
 #include "battery_utils.h"
 #include "board_pinout.h"
 #include "syslog_utils.h"
-#include "query_utils.h"
 #include "power_utils.h"
+#include "sleep_utils.h"
 #include "lora_utils.h"
 #include "wifi_utils.h"
 #include "digi_utils.h"
@@ -48,12 +47,15 @@ ___________________________________________________________________*/
     #include "A7670_utils.h"
 #endif
 
-String              versionDate             = "2024.11.06";
+
+String              versionDate             = "2025-04-24";
 Configuration       Config;
 WiFiClient          espClient;
 #ifdef HAS_GPS
     HardwareSerial  gpsSerial(1);
     TinyGPSPlus     gps;
+    uint32_t        gpsSatelliteTime        = 0;
+    bool            gpsInfoToggle           = false;
 #endif
 
 uint8_t             myWiFiAPIndex           = 0;
@@ -66,12 +68,17 @@ uint32_t            lastBatteryCheck        = 0;
 bool                backUpDigiMode          = false;
 bool                modemLoggedToAPRSIS     = false;
 
+#ifdef HAS_EPAPER
+    uint32_t        lastEpaperTime          = 0;
+    extern String   lastEpaperText;
+#endif
+
 std::vector<ReceivedPacket> receivedPackets;
 
 String firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine;
-
 //#define STARTUP_DELAY 5 //min
 
+
 void setup() {
     Serial.begin(115200);
     POWER_Utils::setup();
@@ -79,53 +86,14 @@ void setup() {
     LoRa_Utils::setup();
     Utils::validateFreqs();
     GPS_Utils::setup();
+    STATION_Utils::loadBlacklistAndManagers();
 
     #ifdef STARTUP_DELAY    // (TEST) just to wait for WiFi init of Routers
         displayShow("", "  STARTUP DELAY ...", "", "", 0);
         delay(STARTUP_DELAY * 60 * 1000);
     #endif
 
-    #ifdef HELTEC_HTCT62
-        if (Config.lowPowerMode) {
-            gpio_wakeup_enable(GPIO_NUM_3, GPIO_INTR_HIGH_LEVEL);
-            esp_deep_sleep_enable_gpio_wakeup(GPIO_NUM_3, ESP_GPIO_WAKEUP_GPIO_HIGH);
-            long lastBeacon = 0;
-            LoRa_Utils::startReceive();
-            while (true) {
-                auto wakeup_reason = esp_sleep_get_wakeup_cause();
-                if (wakeup_reason == 7) { // packet received
-                    Serial.println("Received packet");
-                    String packet = LoRa_Utils::receivePacket();
-                    Serial.println(packet);
-                    if (Config.digi.mode == 2) DIGI_Utils::processLoRaPacket(packet);
-
-                    if (packet.indexOf(Config.callsign + ":?APRSELP{") != -1) { // Send `?APRSELP` to exit low power
-                        Serial.println("Got ?APRSELP message, exiting from low power mode");
-                        break;
-                    };
-                }
-                long time = esp_timer_get_time() / 1000000;
-                if (lastBeacon == 0 || time - lastBeacon >= Config.beacon.interval * 60) {
-                    Serial.println("Sending beacon");
-                    String comment = Config.beacon.comment;
-                    if (Config.battery.sendInternalVoltage) comment += " Batt=" + String(BATTERY_Utils::checkInternalVoltage(),2) + "V";
-                    if (Config.battery.sendExternalVoltage) comment += " Ext=" + String(BATTERY_Utils::checkExternalVoltage(),2) + "V";
-                    LoRa_Utils::sendNewPacket(GPS_Utils::getiGateLoRaBeaconPacket() + comment);
-                    lastBeacon = time;
-                }
-
-                LoRa_Utils::startReceive();
-                Serial.println("Sleeping");
-                long sleep = (Config.beacon.interval * 60) - (time - lastBeacon);
-                Serial.flush();
-                esp_sleep_enable_timer_wakeup(sleep * 1000000);
-                esp_light_sleep_start();
-                Serial.println("Waked up");
-            }
-            Config.loramodule.rxActive = false;
-        }
-    #endif
-    DIGI_Utils::checkEcoMode();
+    SLEEP_Utils::setup();
     WIFI_Utils::setup();
     NTP_Utils::setup();
     SYSLOG_Utils::setup();
@@ -136,68 +104,110 @@ void setup() {
         A7670_Utils::setup();
     #endif
     Utils::checkRebootMode();
+    APRS_IS_Utils::firstConnection();
 }
 
 void loop() {
-    WIFI_Utils::checkAutoAPTimeout();
+    if (Config.digi.ecoMode == 1) {
+        SLEEP_Utils::checkWakeUpFlag();
+        Utils::checkBeaconInterval();
+        STATION_Utils::processOutputPacketBufferUltraEcoMode();
+        Utils::checkSleepByLowBatteryVoltage(1);
+        SLEEP_Utils::startSleeping();
+    } else {
+        WIFI_Utils::checkAutoAPTimeout();
 
-    if (isUpdatingOTA) {
-        ElegantOTA.loop();
-        return; // Don't process IGate and Digi during OTA update
-    }
+        if (isUpdatingOTA) {
+            ElegantOTA.loop();
+            return; // Don't process IGate and Digi during OTA update
+        }
+        
+        #ifdef HAS_GPS
+            if (Config.beacon.gpsActive) {
+                if (millis() - gpsSatelliteTime > 5000) {
+                    gpsInfoToggle = !gpsInfoToggle;
+                    gpsSatelliteTime = millis();
+                }
+                if (gpsInfoToggle) {
+                    thirdLine = "Satellite(s): ";
+                    String gpsData = String(gps.satellites.value());
+                    if (gpsData.length() < 2) gpsData = "0" + gpsData;  // Ensure two-digit formatting
+                    thirdLine += gpsData;
+                } else {
+                    thirdLine = Utils::getLocalIP();
+                }
+            } else {
+                thirdLine = Utils::getLocalIP();
+            }
+        #else
+            thirdLine = Utils::getLocalIP();
+        #endif
 
-    if (Config.lowVoltageCutOff > 0) {
-        BATTERY_Utils::checkIfShouldSleep();
-    }
+        #ifdef HAS_A7670
+            if (Config.aprs_is.active && !modemLoggedToAPRSIS) A7670_Utils::APRS_IS_connect();
+        #else
+            WIFI_Utils::checkWiFi();
+            if (Config.aprs_is.active && (WiFi.status() == WL_CONNECTED) && !espClient.connected()) APRS_IS_Utils::connect();
+        #endif
 
-    thirdLine = Utils::getLocalIP();
+        NTP_Utils::update();
+        TNC_Utils::loop();
 
-    WIFI_Utils::checkWiFi();
+        Utils::checkDisplayInterval();
+        Utils::checkBeaconInterval();
+        
+        APRS_IS_Utils::checkStatus(); // Need that to update display, maybe split this and send APRSIS status to display func?
 
-    #ifdef HAS_A7670
-        if (Config.aprs_is.active && !modemLoggedToAPRSIS) A7670_Utils::APRS_IS_connect();
-    #else
-        if (Config.aprs_is.active && (WiFi.status() == WL_CONNECTED) && !espClient.connected()) APRS_IS_Utils::connect();
-    #endif
-
-    NTP_Utils::update();
-    TNC_Utils::loop();
-
-    Utils::checkDisplayInterval();
-    Utils::checkBeaconInterval();
-    
-    APRS_IS_Utils::checkStatus(); // Need that to update display, maybe split this and send APRSIS status to display func?
-
-    String packet = "";
-    if (Config.loramodule.rxActive) {
-        packet = LoRa_Utils::receivePacket(); // We need to fetch LoRa packet above APRSIS and Digi
-    }
-
-    if (packet != "") {
-        if (Config.aprs_is.active) { // If APRSIS enabled
-            APRS_IS_Utils::processLoRaPacket(packet); // Send received packet to APRSIS
+        String packet = "";
+        if (Config.loramodule.rxActive) {
+            packet = LoRa_Utils::receivePacket(); // We need to fetch LoRa packet above APRSIS and Digi
         }
 
-        if (Config.loramodule.txActive && (Config.digi.mode == 2 || Config.digi.mode == 3 || backUpDigiMode)) { // If Digi enabled
-            STATION_Utils::clean25SegBuffer();
-            DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi
+        if (packet != "") {
+            if (Config.aprs_is.active) { // If APRSIS enabled
+                APRS_IS_Utils::processLoRaPacket(packet); // Send received packet to APRSIS
+            }
+
+            if (Config.loramodule.txActive && (Config.digi.mode == 2 || Config.digi.mode == 3 || backUpDigiMode)) { // If Digi enabled
+                STATION_Utils::clean25SegBuffer();
+                DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi
+            }
+
+            if (Config.tnc.enableServer) { // If TNC server enabled
+                TNC_Utils::sendToClients(packet); // Send received packet to TNC KISS
+            }
+            if (Config.tnc.enableSerial) { // If Serial KISS enabled
+                TNC_Utils::sendToSerial(packet); // Send received packet to Serial KISS
+            }
         }
 
-        if (Config.tnc.enableServer) { // If TNC server enabled
-            TNC_Utils::sendToClients(packet); // Send received packet to TNC KISS
-        }
-        if (Config.tnc.enableSerial) { // If Serial KISS enabled
-            TNC_Utils::sendToSerial(packet); // Send received packet to Serial KISS
+        if (Config.aprs_is.active) {
+            APRS_IS_Utils::listenAPRSIS(); // listen received packet from APRSIS
         }
+
+        STATION_Utils::processOutputPacketBuffer();
+
+        #ifdef HAS_EPAPER   // Only consider updating every 10 seconds (when data to show is different from before)
+            if(lastEpaperTime == 0 || millis() - lastEpaperTime > 10000) {
+                String posibleEpaperText = firstLine + secondLine + thirdLine + fourthLine + fifthLine + sixthLine + seventhLine;
+                if (lastEpaperText != posibleEpaperText) {
+                    displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+                    lastEpaperText = posibleEpaperText;
+                    lastEpaperTime = millis();
+                }
+            }
+        #else
+            displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+        #endif
+
+        Utils::checkRebootTime();
+        Utils::checkSleepByLowBatteryVoltage(1);
     }
+}
 
-    if (Config.aprs_is.active) { // If APRSIS enabled
-        APRS_IS_Utils::listenAPRSIS(); // listen received packet from APRSIS
-    }
-    
-    STATION_Utils::processOutputPacketBuffer();
 
-    displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
-    Utils::checkRebootTime();
-    Utils::checkSleepByLowBatteryVoltage(1);
-}
+// HWT not sleeping!
+
+// ESP32C3 : 
+//    -   HT-CT62 ??
+//    -  and others?

src/aprs_is_utils.cpp

@@ -2,6 +2,7 @@
 #include "configuration.h"
 #include "aprs_is_utils.h"
 #include "station_utils.h"
+#include "board_pinout.h"
 #include "syslog_utils.h"
 #include "query_utils.h"
 #include "A7670_utils.h"
@@ -9,6 +10,7 @@
 #include "display.h"
 #include "utils.h"
 
+
 extern Configuration        Config;
 extern WiFiClient           espClient;
 extern uint32_t             lastScreenOn;
@@ -22,7 +24,8 @@ extern String               seventhLine;
 extern bool                 modemLoggedToAPRSIS;
 extern bool                 backUpDigiMode;
 
-uint32_t lastRxTime         = millis();
+uint32_t    lastRxTime      = millis();
+bool        passcodeValid   = false;
 
 #ifdef HAS_A7670
     extern bool                 stationBeacon;
@@ -50,19 +53,16 @@ namespace APRS_IS_Utils {
         }
         if (count == 20) {
             Serial.println("Tried: " + String(count) + " FAILED!");
-        }
-        else {
+        } else {
             Serial.println("Connected!\n(Server: " + String(Config.aprs_is.server) + " / Port: " + String(Config.aprs_is.port) + ")");
             // String filter = "t/m/" + Config.callsign + "/" + (String)Config.aprs_is.reportingDistance;
-
             String aprsAuth = "user ";
             aprsAuth += Config.callsign;
             aprsAuth += " pass ";
             aprsAuth += Config.aprs_is.passcode;
-            aprsAuth += " vers CA2RXU_LoRa_iGate 2.0 filter ";
+            aprsAuth += " vers CA2RXU_iGate 2.3 filter ";
             aprsAuth += Config.aprs_is.filter;
             upload(aprsAuth);
-            delay(200);
         }
     }
 
@@ -71,7 +71,7 @@ namespace APRS_IS_Utils {
         if (WiFi.status() == WL_CONNECTED) {
             wifiState = "OK";
         } else {
-            if (backUpDigiMode || Config.digi.ecoMode) {
+            if (backUpDigiMode || Config.digi.ecoMode == 1 || Config.digi.ecoMode == 2) {
                 wifiState = "--";
             } else {
                 wifiState = "AP";
@@ -174,38 +174,36 @@ namespace APRS_IS_Utils {
     }
 
     void processLoRaPacket(const String& packet) {
-        if (espClient.connected() || modemLoggedToAPRSIS) {
-            if (packet != "") {
-                if ((packet.substring(0, 3) == "\x3c\xff\x01")  && (packet.indexOf("NOGATE") == -1) && (packet.indexOf("RFONLY") == -1)) {
-                    int firstColonIndex = packet.indexOf(":");
-                    if (firstColonIndex > 5 && firstColonIndex < (packet.length() - 1) && packet[firstColonIndex + 1] != '}' && packet.indexOf("TCPIP") == -1) {
-                        const String& Sender = packet.substring(3, packet.indexOf(">"));
-                        if (Sender != Config.callsign && Utils::checkValidCallsign(Sender)) {
-                            STATION_Utils::updateLastHeard(Sender);
-                            Utils::typeOfPacket(packet.substring(3), 0);  // LoRa-APRS
-                            const String& AddresseeAndMessage = packet.substring(packet.indexOf("::") + 2);
-                            String Addressee = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
-                            Addressee.trim();
-                            bool queryMessage = false;
-                            if (packet.indexOf("::") > 10 && Addressee == Config.callsign) {      // its a message for me!
-                                queryMessage = processReceivedLoRaMessage(Sender, checkForStartingBytes(AddresseeAndMessage), false);
-                            }
-                            if (!queryMessage) {
-                                const String& aprsPacket = buildPacketToUpload(packet);
-                                if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                                    displayToggle(true);
-                                }
-                                lastScreenOn = millis();
-                                #ifdef HAS_A7670
-                                    stationBeacon = true;
-                                    A7670_Utils::uploadToAPRSIS(aprsPacket);
-                                    stationBeacon = false;
-                                #else
-                                    upload(aprsPacket);
-                                #endif
-                                Utils::println("---> Uploaded to APRS-IS");
-                                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+        if (passcodeValid && (espClient.connected() || modemLoggedToAPRSIS)) {
+            if (packet.indexOf("NOGATE") == -1 && packet.indexOf("RFONLY") == -1) {
+                int firstColonIndex = packet.indexOf(":");
+                if (firstColonIndex > 5 && firstColonIndex < (packet.length() - 1) && packet[firstColonIndex + 1] != '}' && packet.indexOf("TCPIP") == -1) {
+                    const String& Sender = packet.substring(3, packet.indexOf(">"));
+                    if (Sender != Config.callsign && Utils::checkValidCallsign(Sender)) {
+                        STATION_Utils::updateLastHeard(Sender);
+                        Utils::typeOfPacket(packet.substring(3), 0);  // LoRa-APRS
+                        const String& AddresseeAndMessage = packet.substring(packet.indexOf("::") + 2);
+                        String Addressee = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
+                        Addressee.trim();
+                        bool queryMessage = false;
+                        if (packet.indexOf("::") > 10 && Addressee == Config.callsign) {      // its a message for me!
+                            queryMessage = processReceivedLoRaMessage(Sender, checkForStartingBytes(AddresseeAndMessage), false);
+                        }
+                        if (!queryMessage) {
+                            const String& aprsPacket = buildPacketToUpload(packet);
+                            if (!Config.display.alwaysOn && Config.display.timeout != 0) {
+                                displayToggle(true);
                             }
+                            lastScreenOn = millis();
+                            #ifdef HAS_A7670
+                                stationBeacon = true;
+                                A7670_Utils::uploadToAPRSIS(aprsPacket);
+                                stationBeacon = false;
+                            #else
+                                upload(aprsPacket);
+                            #endif
+                            Utils::println("---> Uploaded to APRS-IS");
+                            displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
                         }
                     }
                 }
@@ -259,13 +257,22 @@ namespace APRS_IS_Utils {
     }
 
     void processAPRSISPacket(const String& packet) {
-        if (!packet.startsWith("#")) {
+        if (!passcodeValid && packet.indexOf(Config.callsign) != -1) {
+            if (packet.indexOf("unverified") != -1 ) {
+                Serial.println("\n****APRS PASSCODE NOT VALID****\n");
+                displayShow(firstLine, "", "    APRS PASSCODE", "    NOT VALID !!!", "", "", "", 0);
+                while (1) {};
+            } else if (packet.indexOf("verified") != -1 ) {
+                passcodeValid = true;
+            }
+        }
+        if (passcodeValid && !packet.startsWith("#")) {
             if (Config.aprs_is.messagesToRF && packet.indexOf("::") > 0) {
                 String Sender = packet.substring(0, packet.indexOf(">"));
                 const String& AddresseeAndMessage = packet.substring(packet.indexOf("::") + 2);
                 String Addressee = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
                 Addressee.trim();
-                if (Addressee == Config.callsign) {             // its for me!
+                if (Addressee == Config.callsign) {                 // its for me!
                     String receivedMessage;
                     if (AddresseeAndMessage.indexOf("{") > 0) {     // ack?
                         String ackMessage = "ack";
@@ -291,7 +298,8 @@ namespace APRS_IS_Utils {
                         receivedMessage = AddresseeAndMessage.substring(AddresseeAndMessage.indexOf(":") + 1);
                     }
                     if (receivedMessage.indexOf("?") == 0) {
-                        Utils::println("Received Query APRS-IS : " + packet);
+                        Utils::println("Rx Query (APRS-IS)  : " + packet);
+                        Sender.trim();
                         String queryAnswer = QUERY_Utils::process(receivedMessage, Sender, true, false);
                         //Serial.println("---> QUERY Answer : " + queryAnswer.substring(0,queryAnswer.indexOf("\n")));
                         if (!Config.display.alwaysOn && Config.display.timeout != 0) {
@@ -315,22 +323,28 @@ namespace APRS_IS_Utils {
                         seventhLine = "QUERY = ";
                         seventhLine += receivedMessage;
                     }
+                    displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
                 } else {
-                    Utils::print("Received Message from APRS-IS  : " + packet);
-                    if (STATION_Utils::wasHeard(Addressee)) {
+                    Utils::print("Rx Message (APRS-IS): " + packet);
+                    if (STATION_Utils::wasHeard(Addressee) && packet.indexOf("EQNS.") == -1 && packet.indexOf("UNIT.") == -1 && packet.indexOf("PARM.") == -1) {
                         STATION_Utils::addToOutputPacketBuffer(buildPacketToTx(packet, 1));
                         displayToggle(true);
                         lastScreenOn = millis();
                         Utils::typeOfPacket(packet, 1); // APRS-LoRa
+                        displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
                     }
                 }
-                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
             } else if (Config.aprs_is.objectsToRF && packet.indexOf(":;") > 0) {
-                Utils::println("Received Object from APRS-IS  : " + packet);
-                STATION_Utils::addToOutputPacketBuffer(buildPacketToTx(packet, 5));
-                displayToggle(true);
-                lastScreenOn = millis();
-                Utils::typeOfPacket(packet, 1); // APRS-LoRa
+                Utils::print("Rx Object (APRS-IS) : " + packet);
+                if (STATION_Utils::checkObjectTime(packet)) {
+                    STATION_Utils::addToOutputPacketBuffer(buildPacketToTx(packet, 5));
+                    displayToggle(true);
+                    lastScreenOn = millis();
+                    Utils::typeOfPacket(packet, 1); // APRS-LoRa
+                    Serial.println();
+                } else {
+                    Serial.println(" ---> Rejected (Time): No Tx");
+                }
             }
         }
     }
@@ -342,7 +356,7 @@ namespace APRS_IS_Utils {
             if (espClient.connected()) {
                 if (espClient.available()) {
                     String aprsisPacket = espClient.readStringUntil('\r');
-                    // Serial.println(aprsisPacket);
+                    aprsisPacket.trim();    // Serial.println(aprsisPacket);
                     processAPRSISPacket(aprsisPacket);
                     lastRxTime = millis();
                 }
@@ -350,4 +364,24 @@ namespace APRS_IS_Utils {
         #endif
     }
 
+    void firstConnection() {
+        if (Config.aprs_is.active && (WiFi.status() == WL_CONNECTED) && !espClient.connected()) {
+            connect();
+            while (!passcodeValid) {
+                listenAPRSIS();
+            }
+        }
+        if (Config.digi.ecoMode == 1) {
+            displayToggle(false);
+            #ifdef VEXT_CTRL
+                #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3) 
+                    digitalWrite(VEXT_CTRL, LOW);
+                #endif
+                #if defined(HELTEC_WP) || defined(HELTEC_WS) || defined(HELTEC_V3_2)
+                    digitalWrite(VEXT_CTRL, HIGH);
+                #endif
+            #endif
+        }
+    }
+
 }

src/battery_utils.cpp

@@ -5,6 +5,7 @@
 #include "power_utils.h"
 #include "utils.h"
 
+
 extern  Configuration                   Config;
 extern  uint32_t                        lastBatteryCheck;
 
@@ -101,7 +102,7 @@ namespace BATTERY_Utils {
             int sample;
             int sampleSum = 0;
             #ifdef ADC_CTRL
-                #if defined(HELTEC_WIRELESS_TRACKER)
+                #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2)
                     digitalWrite(ADC_CTRL, HIGH);
                 #endif
                 #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
@@ -132,7 +133,7 @@ namespace BATTERY_Utils {
             }
 
             #ifdef ADC_CTRL
-                #if defined(HELTEC_WIRELESS_TRACKER)
+                #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2)
                     digitalWrite(ADC_CTRL, LOW);
                 #endif
                 #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
@@ -197,15 +198,6 @@ namespace BATTERY_Utils {
         // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
     }
 
-    void checkIfShouldSleep() {
-        if (lastBatteryCheck == 0 || millis() - lastBatteryCheck >= 15 * 60 * 1000) {
-            lastBatteryCheck = millis();            
-            if (checkInternalVoltage() < Config.lowVoltageCutOff) {
-                ESP.deepSleep(1800000000); // 30 min sleep (60s = 60e6)
-            }
-        }
-    }
-
     void startupBatteryHealth() {
         #ifdef BATTERY_PIN
             if (Config.battery.monitorInternalVoltage && checkInternalVoltage() < Config.battery.internalSleepVoltage + 0.1) {

src/configuration.cpp

@@ -4,8 +4,11 @@
 #include "display.h"
 
 
+bool shouldSleepStop = true;
+
+
 void Configuration::writeFile() {
-    Serial.println("Saving config..");
+    Serial.println("Saving config...");
 
     StaticJsonDocument<2560> data;
     File configFile = SPIFFS.open("/igate_conf.json", "w");
@@ -94,22 +97,25 @@ void Configuration::writeFile() {
 
     data["other"]["backupDigiMode"]             = backupDigiMode;
 
-    data["other"]["lowPowerMode"]               = lowPowerMode;
-    data["other"]["lowVoltageCutOff"]           = lowVoltageCutOff;
-
     data["personalNote"]                        = personalNote;
 
+    data["blacklist"]                           = blacklist;
+
     data["webadmin"]["active"]                  = webadmin.active;
     data["webadmin"]["username"]                = webadmin.username;
     data["webadmin"]["password"]                = webadmin.password;
 
     data["ntp"]["gmtCorrection"]                = ntp.gmtCorrection;
 
+    data["remoteManagement"]["managers"]        = remoteManagement.managers;
+    data["remoteManagement"]["rfOnly"]          = remoteManagement.rfOnly;
+
     serializeJson(data, configFile);
 
     configFile.close();
 
     Serial.println("Config saved");
+    delay(200);
 }
 
 bool Configuration::readFile() {
@@ -162,7 +168,8 @@ bool Configuration::readFile() {
         aprs_is.objectsToRF             = data["aprs_is"]["objectsToRF"] | false;
 
         digi.mode                       = data["digi"]["mode"] | 0;
-        digi.ecoMode                    = data["digi"]["ecoMode"] | false;
+        digi.ecoMode                    = data["digi"]["ecoMode"] | 0;
+        if (digi.ecoMode == 1) shouldSleepStop = false;
 
         loramodule.txFreq               = data["lora"]["txFreq"] | 433775000;
         loramodule.rxFreq               = data["lora"]["rxFreq"] | 433775000;
@@ -196,7 +203,7 @@ bool Configuration::readFile() {
 
         syslog.active                   = data["syslog"]["active"] | false;
         syslog.server                   = data["syslog"]["server"] | "lora.link9.net";
-        syslog.port                     = data["syslog"]["port"] | 514;
+        syslog.port                     = data["syslog"]["port"] | 1514;
 
         tnc.enableServer                = data["tnc"]["enableServer"] | false;
         tnc.enableSerial                = data["tnc"]["enableSerial"] | false;
@@ -209,17 +216,19 @@ bool Configuration::readFile() {
         webadmin.username               = data["webadmin"]["username"] | "admin";
         webadmin.password               = data["webadmin"]["password"] | "";
 
-        ntp.gmtCorrection               = data["ntp"]["gmtCorrection"] | 0;
-
-        lowPowerMode                    = data["other"]["lowPowerMode"] | false;
-        lowVoltageCutOff                = data["other"]["lowVoltageCutOff"] | 0;
+        ntp.gmtCorrection               = data["ntp"]["gmtCorrection"] | 0.0;
 
         backupDigiMode                  = data["other"]["backupDigiMode"] | false;
 
         rebootMode                      = data["other"]["rebootMode"] | false;
         rebootModeTime                  = data["other"]["rebootModeTime"] | 6;
 
-        personalNote    	            = data["personalNote"] | "personal note here...";
+        personalNote    	            = data["personalNote"] | "personal note here";
+
+        blacklist                       = data["blacklist"] | "station callsign";
+
+        remoteManagement.managers       = data["remoteManagement"]["managers"] | "";
+        remoteManagement.rfOnly         = data["remoteManagement"]["rfOnly"] | true;
 
         if (wifiAPs.size() == 0) { // If we don't have any WiFi's from config we need to add "empty" SSID for AUTO AP
             WiFi_AP wifiap;
@@ -264,7 +273,7 @@ void Configuration::init() {
     beacon.gpsAmbiguity             = false;
 
     digi.mode                       = 0;
-    digi.ecoMode                    = false;
+    digi.ecoMode                    = 0;
 
     tnc.enableServer                = false;
     tnc.enableSerial                = false;
@@ -293,7 +302,7 @@ void Configuration::init() {
 
     syslog.active                   = false;
     syslog.server                   = "lora.link9.net";
-    syslog.port                     = 514;
+    syslog.port                     = 1514;
 
     wxsensor.active                 = false;
     wxsensor.heightCorrection       = 0;
@@ -317,9 +326,6 @@ void Configuration::init() {
 
     battery.sendVoltageAsTelemetry  = false;
 
-    lowPowerMode                    = false;
-    lowVoltageCutOff                = 0;
-
     backupDigiMode                  = false;
 
     rebootMode                      = false;
@@ -327,11 +333,16 @@ void Configuration::init() {
 
     personalNote                    = "";
 
+    blacklist                       = "";
+
     webadmin.active                 = false;
     webadmin.username               = "admin";
     webadmin.password               = "";
 
-    ntp.gmtCorrection               = 0;
+    ntp.gmtCorrection               = 0.0;
+
+    remoteManagement.managers       = "";
+    remoteManagement.rfOnly         = true;
 
     Serial.println("All is Written!");
 }

src/digi_utils.cpp

@@ -2,7 +2,6 @@
 #include "configuration.h"
 #include "station_utils.h"
 #include "aprs_is_utils.h"
-#include "query_utils.h"
 #include "digi_utils.h"
 #include "wifi_utils.h"
 #include "lora_utils.h"
@@ -10,6 +9,7 @@
 #include "display.h"
 #include "utils.h"
 
+
 extern Configuration    Config;
 extern uint32_t         lastScreenOn;
 extern String           iGateBeaconPacket;
@@ -117,46 +117,40 @@ namespace DIGI_Utils {
     }
 
     void processLoRaPacket(const String& packet) {        
-        if (packet != "") {
-            if ((packet.substring(0, 3) == "\x3c\xff\x01") && (packet.indexOf("NOGATE") == -1)) {
-                bool thirdPartyPacket = false;
-                String temp, Sender;
-                int firstColonIndex = packet.indexOf(":");
-                if (firstColonIndex > 5 && firstColonIndex < (packet.length() - 1) && packet[firstColonIndex + 1] == '}' && packet.indexOf("TCPIP") > 0) {   // 3rd Party 
-                    thirdPartyPacket = true;
-                    temp    = packet.substring(packet.indexOf(":}") + 2);
-                    Sender  = temp.substring(0, temp.indexOf(">"));
-                } else {
-                    temp    = packet.substring(3);
-                    Sender  = packet.substring(3, packet.indexOf(">"));
+        if (packet.indexOf("NOGATE") == -1) {
+            bool thirdPartyPacket = false;
+            String temp, Sender;
+            int firstColonIndex = packet.indexOf(":");
+            if (firstColonIndex > 5 && firstColonIndex < (packet.length() - 1) && packet[firstColonIndex + 1] == '}' && packet.indexOf("TCPIP") > 0) {   // 3rd Party 
+                thirdPartyPacket = true;
+                temp    = packet.substring(packet.indexOf(":}") + 2);
+                Sender  = temp.substring(0, temp.indexOf(">"));
+            } else {
+                temp    = packet.substring(3);
+                Sender  = packet.substring(3, packet.indexOf(">"));
+            }
+            if (Sender != Config.callsign) {        // Avoid listening to own packets
+                if (!thirdPartyPacket && !Utils::checkValidCallsign(Sender)) {
+                    return;
                 }
-                if (Sender != Config.callsign) {        // Avoid listening to own packets
-                    if (!thirdPartyPacket && !Utils::checkValidCallsign(Sender)) {
-                        return;
-                    }
-                    if (STATION_Utils::check25SegBuffer(Sender, temp.substring(temp.indexOf(":") + 2)) || Config.lowPowerMode) {
-                        STATION_Utils::updateLastHeard(Sender);
-                        Utils::typeOfPacket(temp, 2);    // Digi
-                        bool queryMessage = false;
-                        if (temp.indexOf("::") > 10) {   // it's a message
-                            String AddresseeAndMessage  = temp.substring(temp.indexOf("::") + 2);
-                            String Addressee            = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
-                            Addressee.trim();
-                            if (Addressee == Config.callsign) {     // it's a message for me!
-                                queryMessage = APRS_IS_Utils::processReceivedLoRaMessage(Sender, AddresseeAndMessage, thirdPartyPacket);
-                            }
+                if (STATION_Utils::check25SegBuffer(Sender, temp.substring(temp.indexOf(":") + 2))) {
+                    STATION_Utils::updateLastHeard(Sender);
+                    Utils::typeOfPacket(temp, 2);    // Digi
+                    bool queryMessage = false;
+                    if (temp.indexOf("::") > 10) {   // it's a message
+                        String AddresseeAndMessage  = temp.substring(temp.indexOf("::") + 2);
+                        String Addressee            = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
+                        Addressee.trim();
+                        if (Addressee == Config.callsign) {     // it's a message for me!
+                            queryMessage = APRS_IS_Utils::processReceivedLoRaMessage(Sender, AddresseeAndMessage, thirdPartyPacket);
                         }
-                        if (!queryMessage) {
-                            String loraPacket = generateDigipeatedPacket(packet.substring(3), thirdPartyPacket);
-                            if (loraPacket != "") {
-                                if (Config.lowPowerMode) {
-                                    LoRa_Utils::sendNewPacket(loraPacket);
-                                } else {
-                                    STATION_Utils::addToOutputPacketBuffer(loraPacket);
-                                }
-                                displayToggle(true);
-                                lastScreenOn = millis();
-                            }
+                    }
+                    if (!queryMessage) {
+                        String loraPacket = generateDigipeatedPacket(packet.substring(3), thirdPartyPacket);
+                        if (loraPacket != "") {
+                            STATION_Utils::addToOutputPacketBuffer(loraPacket);
+                            if (Config.digi.ecoMode != 1) displayToggle(true);
+                            lastScreenOn = millis();
                         }
                     }
                 }
@@ -164,12 +158,4 @@ namespace DIGI_Utils {
         }
     }
 
-    void checkEcoMode() {
-        if (Config.digi.ecoMode) {
-            Config.display.alwaysOn     = false;
-            Config.display.timeout      = 0;
-            setCpuFrequencyMhz(10);
-        }
-    }
-
 }

src/display.cpp

@@ -9,25 +9,37 @@
         #include <TFT_eSPI.h>
 
         TFT_eSPI tft = TFT_eSPI(); 
+        TFT_eSprite sprite  = TFT_eSprite(&tft);
 
         #ifdef HELTEC_WIRELESS_TRACKER
             #define bigSizeFont     2
             #define smallSizeFont   1
             #define lineSpacing     10
         #endif
+        #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
+            #define bigSizeFont     5
+            #define smallSizeFont   2
+            #define lineSpacing     25
+        #endif
+        uint16_t redColor           = 0xc8a2;
     #else
         #ifdef HAS_EPAPER
-            //
+            #include <heltec-eink-modules.h>
+            #include "Fonts/FreeSansBold9pt7b.h"
+            EInkDisplay_WirelessPaperV1_1 display;
+            String lastEpaperText;
         #else
             #include <Adafruit_GFX.h>
-            #include <Adafruit_SSD1306.h>
-            #if defined(HELTEC_V3) || defined(HELTEC_WS)
-                #define OLED_DISPLAY_HAS_RST_PIN
-            #endif
-            #ifdef HELTEC_WSL_V3_DISPLAY
-                Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST);
+            #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                #include <Adafruit_SH110X.h>
+                Adafruit_SH1106G display(128, 64, &Wire, OLED_RST);
             #else
-                Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
+                #include <Adafruit_SSD1306.h>
+                #ifdef HELTEC_WSL_V3_DISPLAY
+                    Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST);
+                #else
+                    Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
+                #endif
             #endif
         #endif
     #endif
@@ -35,16 +47,8 @@
     
 extern  Configuration   Config;
 
-String  oldHeader, oldFirstLine, oldSecondLine, oldThirdLine, oldFourthLine, oldFifthLine, oldSixthLine;
 bool    displayFound    = false;
 
-
-void cleanTFT() {
-    #ifdef HAS_TFT
-        tft.fillScreen(TFT_BLACK);
-    #endif
-}
-
 void displaySetup() {
     #ifdef HAS_DISPLAY
         delay(500);
@@ -56,11 +60,20 @@ void displaySetup() {
             } else {
                 tft.setRotation(1);
             }
+            pinMode(TFT_BL, OUTPUT);
+            digitalWrite(TFT_BL, HIGH);
             tft.setTextFont(0);
             tft.fillScreen(TFT_BLACK);
+            #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
+                sprite.createSprite(320,240);
+            #else
+                sprite.createSprite(160,80);
+            #endif
         #else
             #ifdef HAS_EPAPER
-                //
+                display.landscape();
+                display.printCenter("LoRa APRS iGate Initialising...");
+                display.update();
             #else
                 #ifdef OLED_DISPLAY_HAS_RST_PIN
                     pinMode(OLED_RST, OUTPUT);
@@ -69,17 +82,30 @@ void displaySetup() {
                     digitalWrite(OLED_RST, HIGH);
                 #endif
 
-                if(display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
-                    displayFound = true;
-                    if (Config.display.turn180) display.setRotation(2);
-                    display.clearDisplay();
-                    display.setTextColor(WHITE);
-                    display.setTextSize(1);
-                    display.setCursor(0, 0);
-                    display.ssd1306_command(SSD1306_SETCONTRAST);
-                    display.ssd1306_command(1);
-                    display.display();
-                }
+                #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                    if (!display.begin(0x3c, false)) {
+                        displayFound = true;
+                        if (Config.display.turn180) display.setRotation(2);
+                        display.clearDisplay();
+                        display.setTextColor(SH110X_WHITE);
+                        display.setTextSize(1);
+                        display.setCursor(0, 0);
+                        display.setContrast(1);
+                        display.display();
+                    }
+                #else
+                    if(display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
+                        displayFound = true;
+                        if (Config.display.turn180) display.setRotation(2);
+                        display.clearDisplay();
+                        display.setTextColor(WHITE);
+                        display.setTextSize(1);
+                        display.setCursor(0, 0);
+                        display.ssd1306_command(SSD1306_SETCONTRAST);
+                        display.ssd1306_command(1);
+                        display.display();
+                    }
+                #endif
             #endif
         #endif
         delay(1000);
@@ -93,9 +119,14 @@ void displayToggle(bool toggle) {
                 digitalWrite(TFT_BL, HIGH);
             #else
                 #ifdef HAS_EPAPER
-                    // ... to be continued
+                    display.printCenter("EPAPER Display Disabled by toggle...");
+                    display.update();
                 #else
-                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYON);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        if (displayFound) display.oled_command(SH110X_DISPLAYON);
+                    #else
+                        if (displayFound) display.ssd1306_command(SSD1306_DISPLAYON);
+                    #endif
                 #endif
             #endif
         } else {
@@ -103,65 +134,65 @@ void displayToggle(bool toggle) {
                 digitalWrite(TFT_BL, LOW);
             #else
                 #ifdef HAS_EPAPER
-                    // ... to be continued
+                    display.printCenter("Enabled EPAPER Display...");
+                    display.update();
                 #else
-                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYOFF);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        if (displayFound) display.oled_command(SH110X_DISPLAYOFF);
+                    #else
+                        if (displayFound) display.ssd1306_command(SSD1306_DISPLAYOFF);
+                    #endif
+                    
                 #endif
             #endif
         }
     #endif
 }
 
-bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3) {
-    if (oldHeader != header || oldFirstLine != line1 || oldSecondLine != line2 || oldThirdLine != line3) {
-        oldHeader       = header;
-        oldFirstLine    = line1;
-        oldSecondLine   = line2;
-        oldThirdLine    = line3;
-        return true;
-    } else {
-        return false;
-    }
-}
-
-bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6) {
-    if (oldHeader != header || oldFirstLine != line1 || oldSecondLine != line2 || oldThirdLine != line3 || oldFourthLine != line4 || oldFifthLine != line5 || oldSixthLine != line6) {
-        oldHeader       = header;
-        oldFirstLine    = line1;
-        oldSecondLine   = line2;
-        oldThirdLine    = line3;
-        oldFourthLine   = line4;
-        oldFifthLine    = line5;
-        oldSixthLine    = line6;
-        return true;
-    } else {
-        return false;
-    }
-}
-
 void displayShow(const String& header, const String& line1, const String& line2, const String& line3, int wait) {
     #ifdef HAS_DISPLAY
         const String* const lines[] = {&line1, &line2, &line3};
         #ifdef HAS_TFT
-            if (shouldCleanTFT(header, line1, line2, line3)) {
-                cleanTFT();
-            }
-            tft.setTextColor(TFT_WHITE,TFT_BLACK);
-            tft.setTextSize(bigSizeFont);
-            tft.setCursor(0, 0);
-            tft.print(header);
-            tft.setTextSize(smallSizeFont);
+            sprite.fillSprite(TFT_BLACK);
+            #if defined(HELTEC_WIRELESS_TRACKER)
+                sprite.fillRect(0, 0, 160, 19, redColor);
+            #endif
+            #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
+                sprite.fillRect(0, 0, 320, 43, redColor);
+            #endif
+            sprite.setTextFont(0);
+            sprite.setTextSize(bigSizeFont);
+            sprite.setTextColor(TFT_WHITE, redColor);
+            sprite.drawString(header, 3, 3);
+
+            sprite.setTextSize(smallSizeFont);
+            sprite.setTextColor(TFT_WHITE, TFT_BLACK);
+
             for (int i = 0; i < 3; i++) {
-                tft.setCursor(0, ((lineSpacing * (2 + i)) - 2));
-                tft.print(*lines[i]);
+                sprite.drawString(*lines[i], 3, (lineSpacing * (2 + i)) - 2);
             }
+
+            sprite.pushSprite(0,0);
         #else
             #ifdef HAS_EPAPER
-                // ... to be continued
+                display.clearMemory();
+                display.setCursor(5,10);
+                display.setFont(&FreeSansBold9pt7b);
+                display.println(header);
+                display.setFont(NULL);
+                for (int i = 0; i < 3; i++) {
+                    display.setCursor(0, 25 + (14 * i));
+                    display.println(*lines[i]);
+                }
+                display.update();
             #else
                 if (displayFound) {
                     display.clearDisplay();
-                    display.setTextColor(WHITE);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        display.setTextColor(SH110X_WHITE);
+                    #else
+                        display.setTextColor(WHITE);
+                    #endif
                     display.setTextSize(1);
                     display.setCursor(0, 0);
                     display.println(header);
@@ -169,8 +200,12 @@ void displayShow(const String& header, const String& line1, const String& line2,
                         display.setCursor(0, 8 + (8 * i));
                         display.println(*lines[i]);
                     }
-                    display.ssd1306_command(SSD1306_SETCONTRAST);
-                    display.ssd1306_command(1);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        display.setContrast(1);
+                    #else
+                        display.ssd1306_command(SSD1306_SETCONTRAST);
+                        display.ssd1306_command(1);
+                    #endif
                     display.display();
                 }
             #endif
@@ -183,25 +218,47 @@ void displayShow(const String& header, const String& line1, const String& line2,
     #ifdef HAS_DISPLAY
         const String* const lines[] = {&line1, &line2, &line3, &line4, &line5, &line6};
         #ifdef HAS_TFT
-            if (shouldCleanTFT(header, line1, line2, line3, line4, line5, line6)) {
-                cleanTFT();
-            }
-            tft.setTextColor(TFT_WHITE,TFT_BLACK);
-            tft.setTextSize(bigSizeFont);
-            tft.setCursor(0, 0);
-            tft.print(header);
-            tft.setTextSize(smallSizeFont);
+            sprite.fillSprite(TFT_BLACK);
+            #if defined(HELTEC_WIRELESS_TRACKER)
+                sprite.fillRect(0, 0, 160, 19, redColor);
+            #endif
+            #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
+                sprite.fillRect(0, 0, 320, 43, redColor);
+            #endif
+            sprite.setTextFont(0);
+            sprite.setTextSize(bigSizeFont);
+            sprite.setTextColor(TFT_WHITE, redColor);
+            sprite.drawString(header, 3, 3);
+
+            sprite.setTextSize(smallSizeFont);
+            sprite.setTextColor(TFT_WHITE, TFT_BLACK);
+
             for (int i = 0; i < 6; i++) {
-                tft.setCursor(0, ((lineSpacing * (2 + i)) - 2));
-                tft.print(*lines[i]);
+                sprite.drawString(*lines[i], 3, (lineSpacing * (2 + i)) - 2);
             }
+
+            sprite.pushSprite(0,0);
         #else
             #ifdef HAS_EPAPER
-                // ... to be continued
+                lastEpaperText = header + line1 + line2 + line3 + line4 + line5 + line6;
+                display.clearMemory();
+                display.setCursor(5,10);
+                display.setFont(&FreeSansBold9pt7b);
+                display.println(header);
+                display.setFont(NULL);
+                for (int i = 0; i < 6; i++) {
+                    display.setCursor(0, 25 + (14 * i));
+                    display.println(*lines[i]);
+                }
+                display.update();
             #else
                 if (displayFound) {
                     display.clearDisplay();
-                    display.setTextColor(WHITE);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        display.setTextColor(SH110X_WHITE);
+                    #else
+                        display.setTextColor(WHITE);
+                    #endif
                     display.setTextSize(2);
                     display.setCursor(0, 0);
                     display.println(header);
@@ -210,8 +267,12 @@ void displayShow(const String& header, const String& line1, const String& line2,
                         display.setCursor(0, 16 + (8 * i));
                         display.println(*lines[i]);
                     }
-                    display.ssd1306_command(SSD1306_SETCONTRAST);
-                    display.ssd1306_command(1);
+                    #if defined(TTGO_T_Beam_S3_SUPREME_V3)
+                        display.setContrast(1);
+                    #else
+                        display.ssd1306_command(SSD1306_SETCONTRAST);
+                        display.ssd1306_command(1);
+                    #endif
                     display.display();
                 }
             #endif

src/gps_utils.cpp

@@ -110,22 +110,30 @@ namespace GPS_Utils {
     }
 
     String decodeEncodedGPS(const String& packet) {
-        const String& GPSPacket         = packet.substring(packet.indexOf(":!")+3);
-        const String& encodedLatitude   = GPSPacket.substring(0,4);
-        const String& encodedLongtitude = GPSPacket.substring(4,8);
-        const String& comment           = GPSPacket.substring(12);
+        int indexOfExclamation  = packet.indexOf(":!");
+        int indexOfEqual        = packet.indexOf(":=");
 
-        int Y1 = int(encodedLatitude[0]);
-        int Y2 = int(encodedLatitude[1]);
-        int Y3 = int(encodedLatitude[2]);
-        int Y4 = int(encodedLatitude[3]);
-        float decodedLatitude = 90.0 - ((((Y1-33) * pow(91,3)) + ((Y2-33) * pow(91,2)) + ((Y3-33) * 91) + Y4-33) / 380926.0);
-        
-        int X1 = int(encodedLongtitude[0]);
-        int X2 = int(encodedLongtitude[1]);
-        int X3 = int(encodedLongtitude[2]);
-        int X4 = int(encodedLongtitude[3]);
-        float decodedLongitude = -180.0 + ((((X1-33) * pow(91,3)) + ((X2-33) * pow(91,2)) + ((X3-33) * 91) + X4-33) / 190463.0);
+        const uint8_t OFFSET = 3;     // Offset for encoded data in the packet
+        String GPSPacket;
+        if (indexOfExclamation > 10) {
+            GPSPacket = packet.substring(indexOfExclamation + OFFSET);
+        } else if (indexOfEqual > 10) {
+            GPSPacket = packet.substring(indexOfEqual + OFFSET);
+        }
+
+        String encodedLatitude = GPSPacket.substring(0,4);
+        int Y1 = encodedLatitude[0] - 33;
+        int Y2 = encodedLatitude[1] - 33;
+        int Y3 = encodedLatitude[2] - 33;
+        int Y4 = encodedLatitude[3] - 33;
+        float decodedLatitude = 90.0 - (((Y1 * pow(91,3)) + (Y2 * pow(91,2)) + (Y3 * 91) + Y4) / 380926.0);
+
+        String encodedLongitude = GPSPacket.substring(4,8);
+        int X1 = encodedLongitude[0] - 33;
+        int X2 = encodedLongitude[1] - 33;
+        int X3 = encodedLongitude[2] - 33;
+        int X4 = encodedLongitude[3] - 33;
+        float decodedLongitude = -180.0 + (((X1 * pow(91,3)) + (X2 * pow(91,2)) + (X3 * 91) + X4) / 190463.0);
 
         distance = String(calculateDistanceTo(decodedLatitude, decodedLongitude),1);
 
@@ -136,6 +144,7 @@ namespace GPS_Utils {
         decodedGPS += distance;
         decodedGPS += "km";
 
+        String comment = GPSPacket.substring(12);
         if (comment != "") {
             decodedGPS += " / ";
             decodedGPS += comment;
@@ -144,33 +153,30 @@ namespace GPS_Utils {
     }
 
     String getReceivedGPS(const String& packet) {
-        String infoGPS;
-        if (packet.indexOf(":!") > 10) {
-            infoGPS = packet.substring(packet.indexOf(":!") + 2);
-        } else if (packet.indexOf(":=") > 10) {
-            infoGPS = packet.substring(packet.indexOf(":=") + 2);
-        }
-        const String& Latitude      = infoGPS.substring(0,8);
-        const String& Longitude     = infoGPS.substring(9,18);
-        const String& comment       = infoGPS.substring(19);  
-        
-        float convertedLatitude, convertedLongitude;
-        const String& firstLatPart   = Latitude.substring(0,2);
-        const String& secondLatPart  = Latitude.substring(2,4);
-        const String& thirdLatPart   = Latitude.substring(Latitude.indexOf(".") + 1, Latitude.indexOf(".") + 3);
-        convertedLatitude     = firstLatPart.toFloat() + (secondLatPart.toFloat()/60) + (thirdLatPart.toFloat()/(60*100));
+        int indexOfExclamation  = packet.indexOf(":!");
+        int indexOfEqual        = packet.indexOf(":=");
+        int indexOfAt           = packet.indexOf(":@");
 
-        const String& firstLngPart   = Longitude.substring(0,3);
-        const String& secondLngPart  = Longitude.substring(3,5);
-        const String& thirdLngPart   = Longitude.substring(Longitude.indexOf(".") + 1, Longitude.indexOf(".") + 3);        
-        convertedLongitude    = firstLngPart.toFloat() + (secondLngPart.toFloat()/60) + (thirdLngPart.toFloat()/(60*100));
-        
-        if (String(Latitude[7]) == "S") {
-            convertedLatitude = -convertedLatitude;
-        } 
-        if (String(Longitude[8]) == "W") {
-            convertedLongitude = -convertedLongitude;
+        String infoGPS;
+        if (indexOfExclamation > 10) {
+            infoGPS = packet.substring(indexOfExclamation + 2);
+        } else if (indexOfEqual > 10) {
+            infoGPS = packet.substring(indexOfEqual + 2);
+        } else if (indexOfAt > 10) {
+            infoGPS = packet.substring(indexOfAt + 9);  // 9 = 2+7 (when 7 is timestamp characters)
         }
+
+        String Latitude             = infoGPS.substring(0,8);                   // First 8 characters are Latitude
+        float convertedLatitude     = Latitude.substring(0,2).toFloat();        // First 2 digits (Degrees)
+        convertedLatitude += Latitude.substring(2,4).toFloat() / 60;            // Next 2 digits (Minutes)
+        convertedLatitude += Latitude.substring(Latitude.indexOf(".") + 1, Latitude.indexOf(".") + 3).toFloat() / (60*100);
+        if (Latitude.endsWith("S")) convertedLatitude = -convertedLatitude;     // Handle Southern Hemisphere
+
+        String Longitude            = infoGPS.substring(9,18);                  // Next 9 characters are Longitude
+        float convertedLongitude    = Longitude.substring(0,3).toFloat();       // First 3 digits (Degrees)
+        convertedLongitude += Longitude.substring(3,5).toFloat() / 60;          // Next 2 digits (Minutes)
+        convertedLongitude += Longitude.substring(Longitude.indexOf(".") + 1, Longitude.indexOf(".") + 3).toFloat() / (60*100);
+        if (Longitude.endsWith("W")) convertedLongitude = -convertedLongitude;  // Handle Western Hemisphere
         
         distance = String(calculateDistanceTo(convertedLatitude, convertedLongitude),1);
 
@@ -181,6 +187,7 @@ namespace GPS_Utils {
         decodedGPS += distance;
         decodedGPS += "km";
 
+        String comment = infoGPS.substring(19);  
         if (comment != "") {
             decodedGPS += " / ";
             decodedGPS += comment;
@@ -189,27 +196,36 @@ namespace GPS_Utils {
     }
 
     String getDistanceAndComment(const String& packet) {
-        uint8_t encodedBytePosition = 0;
-        if (packet.indexOf(":!") > 10) {
-            encodedBytePosition = packet.indexOf(":!") + 14;
-        }
-        if (packet.indexOf(":=") > 10) {
-            encodedBytePosition = packet.indexOf(":=") + 14;
-        }
-        if (encodedBytePosition != 0) {
-            if (String(packet[encodedBytePosition]) == "G" || String(packet[encodedBytePosition]) == "Q" || String(packet[encodedBytePosition]) == "[" || String(packet[encodedBytePosition]) == "H") {
-                return decodeEncodedGPS(packet);
-            } else {
-                return getReceivedGPS(packet);
-            }
+        int indexOfAt = packet.indexOf(":@");
+        if (indexOfAt > 10) {
+            return getReceivedGPS(packet);
         } else {
-            return " _ / _ / _ ";
+            const uint8_t ENCODED_BYTE_OFFSET = 14;     // Offset for encoded data in the packet
+            int indexOfExclamation  = packet.indexOf(":!");
+            int indexOfEqual        = packet.indexOf(":=");
+            uint8_t encodedBytePosition = 0;
+            if (indexOfExclamation > 10) {              // Determine the position where encoded data starts
+                encodedBytePosition = indexOfExclamation + ENCODED_BYTE_OFFSET;
+            } else if (indexOfEqual > 10) {
+                encodedBytePosition = indexOfEqual + ENCODED_BYTE_OFFSET;
+            }
+
+            if (encodedBytePosition != 0) {
+                char currentChar = packet[encodedBytePosition];
+                if (currentChar == 'G' || currentChar == 'Q' || currentChar == '[' || currentChar == 'H' || currentChar == 'X') {
+                    return decodeEncodedGPS(packet);    // If valid encoded data position is found, decode it
+                } else {
+                    return getReceivedGPS(packet);
+                }
+            } else {
+                return " _ / _ / _ ";
+            }
         }
     }
 
     void setup() {
         #ifdef HAS_GPS
-            if (Config.beacon.gpsActive) {
+            if (Config.beacon.gpsActive && Config.digi.ecoMode != 1) {
                 gpsSerial.begin(GPS_BAUD, SERIAL_8N1, GPS_TX, GPS_RX);
             }
         #endif

src/kiss_utils.cpp

@@ -1,6 +1,7 @@
 #include <Arduino.h>
 #include "kiss_protocol.h"
 
+
 bool validateTNC2Frame(const String& tnc2FormattedFrame) {
     return (tnc2FormattedFrame.indexOf(':') != -1) && (tnc2FormattedFrame.indexOf('>') != -1);
 }

src/lora_utils.cpp

@@ -2,12 +2,14 @@
 #include <WiFi.h>
 #include "configuration.h"
 #include "aprs_is_utils.h"
+#include "station_utils.h"
 #include "board_pinout.h"
 #include "syslog_utils.h"
 #include "ntp_utils.h"
 #include "display.h"
 #include "utils.h"
 
+
 extern Configuration    Config;
 extern uint32_t         lastRxTime;
 
@@ -67,11 +69,11 @@ namespace LoRa_Utils {
             while (true);
         }
         #if defined(HAS_SX1262) || defined(HAS_SX1268) || defined(HAS_LLCC68)
-            if (!Config.lowPowerMode) {
-                radio.setDio1Action(setFlag);
-            } else {
+            //if (!Config.lowPowerMode) {
+            radio.setDio1Action(setFlag);
+            /*} else {
                 radio.setDIOMapping(1, RADIOLIB_SX126X_IRQ_RX_DONE);
-            }
+            }*/
         #endif
         #if defined(HAS_SX1278) || defined(HAS_SX1276)
             radio.setDio0Action(setFlag, RISING);
@@ -131,7 +133,7 @@ namespace LoRa_Utils {
         }
         
         #ifdef INTERNAL_LED_PIN
-            if (!Config.digi.ecoMode) digitalWrite(INTERNAL_LED_PIN, HIGH);
+            if (Config.digi.ecoMode != 1) digitalWrite(INTERNAL_LED_PIN, HIGH);     // disabled in Ultra Eco Mode
         #endif
         int state = radio.transmit("\x3c\xff\x01" + newPacket);
         transmitFlag = true;
@@ -139,70 +141,69 @@ namespace LoRa_Utils {
             if (Config.syslog.active && WiFi.status() == WL_CONNECTED) {
                 SYSLOG_Utils::log(3, newPacket, 0, 0.0, 0);    // TX
             }
-            Utils::print("---> LoRa Packet Tx    : ");
+            Utils::print("---> LoRa Packet Tx : ");
             Utils::println(newPacket);
         } else {
             Utils::print(F("failed, code "));
             Utils::println(String(state));
         }
         #ifdef INTERNAL_LED_PIN
-            if (!Config.digi.ecoMode) digitalWrite(INTERNAL_LED_PIN, LOW);
+            if (Config.digi.ecoMode != 1) digitalWrite(INTERNAL_LED_PIN, LOW);      // disabled in Ultra Eco Mode
         #endif
         if (Config.loramodule.txFreq != Config.loramodule.rxFreq) {
             changeFreqRx();
         }
     }
 
-    /*String packetSanitization(const String& packet) {
-        String sanitizedPacket = packet;
-        if (packet.indexOf("\0") > 0) {
-            sanitizedPacket.replace("\0", "");
+    String receivePacketFromSleep() {
+        String packet = "";
+        int state = radio.readData(packet);
+        if (state == RADIOLIB_ERR_NONE) {
+            Utils::println("<--- LoRa Packet Rx : " + packet.substring(3));
+        } else {
+            packet = "";
         }
-        if (packet.indexOf("\r") > 0) {
-            sanitizedPacket.replace("\r", "");
-        }
-        if (packet.indexOf("\n") > 0) {
-            sanitizedPacket.replace("\n", "");
-        }
-        return sanitizedPacket;
-    }*/
-
-    void startReceive() {
-        radio.startReceive();
+        return packet;
     }
 
     String receivePacket() {
         String packet = "";
-        if (operationDone || Config.lowPowerMode) {
+        if (operationDone) {
             operationDone = false;
-            if (transmitFlag && !Config.lowPowerMode) {
+            if (transmitFlag) {
                 radio.startReceive();
                 transmitFlag = false;
             } else {
                 int state = radio.readData(packet);
                 if (state == RADIOLIB_ERR_NONE) {
                     if (packet != "") {
-                        rssi        = radio.getRSSI();
-                        snr         = radio.getSNR();
-                        freqError   = radio.getFrequencyError();
-                        Utils::println("<--- LoRa Packet Rx    : " + packet.substring(3));
-                        Utils::println("(RSSI:" + String(rssi) + " / SNR:" + String(snr) + " / FreqErr:" + String(freqError) + ")");
 
-                        if (!Config.lowPowerMode && !Config.digi.ecoMode) {
-                            if (receivedPackets.size() >= 10) {
-                                receivedPackets.erase(receivedPackets.begin());
+                        String sender   = packet.substring(3, packet.indexOf(">"));
+                        if (packet.substring(0,3) == "\x3c\xff\x01" && !STATION_Utils::isBlacklisted(sender)){   // avoid processing BlackListed stations
+                            rssi        = radio.getRSSI();
+                            snr         = radio.getSNR();
+                            freqError   = radio.getFrequencyError();
+                            Utils::println("<--- LoRa Packet Rx : " + packet.substring(3));
+                            Utils::println("(RSSI:" + String(rssi) + " / SNR:" + String(snr) + " / FreqErr:" + String(freqError) + ")");
+
+                            if (Config.digi.ecoMode == 0) {
+                                if (receivedPackets.size() >= 10) {
+                                    receivedPackets.erase(receivedPackets.begin());
+                                }
+                                ReceivedPacket receivedPacket;
+                                receivedPacket.rxTime   = NTP_Utils::getFormatedTime();
+                                receivedPacket.packet   = packet.substring(3);
+                                receivedPacket.RSSI     = rssi;
+                                receivedPacket.SNR      = snr;
+                                receivedPackets.push_back(receivedPacket);
                             }
-                            ReceivedPacket receivedPacket;
-                            receivedPacket.rxTime   = NTP_Utils::getFormatedTime();
-                            receivedPacket.packet   = packet.substring(3);
-                            receivedPacket.RSSI     = rssi;
-                            receivedPacket.SNR      = snr;
-                            receivedPackets.push_back(receivedPacket);
-                        }
 
-                        if (Config.syslog.active && WiFi.status() == WL_CONNECTED) {
-                            SYSLOG_Utils::log(1, packet, rssi, snr, freqError); // RX
-                        }
+                            if (Config.syslog.active && WiFi.status() == WL_CONNECTED) {
+                                SYSLOG_Utils::log(1, packet, rssi, snr, freqError); // RX
+                            }
+                        } else {
+                            packet = "";
+                        }                        
                         lastRxTime = millis();
                         return packet;
                     }
@@ -225,6 +226,10 @@ namespace LoRa_Utils {
         return packet;
     }
 
+    void wakeRadio() {
+        radio.startReceive();
+    }
+
     void sleepRadio() {
         radio.sleep();
     }

src/ntp_utils.cpp

@@ -15,7 +15,7 @@ NTPClient   timeClient(ntpUDP, "pool.ntp.org", 0, 15 * 60 * 1000);  // Update in
 namespace NTP_Utils {
 
     void setup() {
-        if (WiFi.status() == WL_CONNECTED && !Config.digi.ecoMode && Config.callsign != "NOCALL-10") {
+        if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0 && Config.callsign != "NOCALL-10") {
             int gmt = Config.ntp.gmtCorrection * 3600;
             timeClient.setTimeOffset(gmt);
             timeClient.begin();
@@ -23,11 +23,11 @@ namespace NTP_Utils {
     }
 
     void update() {
-        if (WiFi.status() == WL_CONNECTED && !Config.digi.ecoMode && Config.callsign != "NOCALL-10") timeClient.update();
+        if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0 && Config.callsign != "NOCALL-10") timeClient.update();
     }
 
     String getFormatedTime() {
-        if (!Config.digi.ecoMode) return timeClient.getFormattedTime();
+        if (Config.digi.ecoMode == 0) return timeClient.getFormattedTime();
         return "DigiEcoMode Active";
     }
 

src/ota_utils.cpp

@@ -5,6 +5,7 @@
 #include "ota_utils.h"
 #include "display.h"
 
+
 extern Configuration        Config;
 extern uint32_t             lastScreenOn;
 extern bool                 isUpdatingOTA;
@@ -48,13 +49,13 @@ namespace OTA_Utils {
     void onOTAEnd(bool success) {
         displayToggle(true);
         lastScreenOn = millis();
-        if (success) {
-            Serial.println("OTA update finished successfully!");
-            displayShow("", "", " OTA update success!", "", "    Rebooting ...", "", "", 4000);
-        } else {
-            Serial.println("There was an error during OTA update!");
-            displayShow("", "", " OTA update fail!", "", "", "", "", 4000);
-        }
+
+        String statusMessage = success ? "OTA update success!" : "OTA update fail!";
+        String rebootMessage = success ? "Rebooting ..." : "";
+
+        Serial.println(success ? "OTA update finished successfully!" : "There was an error during OTA update!");
+        displayShow("", "", statusMessage, "", rebootMessage, "", "", 4000);
+        
         isUpdatingOTA = false;
     }
     

src/power_utils.cpp

@@ -4,9 +4,17 @@
 #include "power_utils.h"
 
 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
-    #define I2C_SDA 21
-    #define I2C_SCL 22
-    #define IRQ_PIN 35
+    #ifdef TTGO_T_Beam_S3_SUPREME_V3
+        #define I2C0_SDA 17
+        #define I2C0_SCL 18
+        #define I2C1_SDA 42
+        #define I2C1_SCL 41
+        #define IRQ_PIN  40
+    #else
+        #define I2C_SDA 21
+        #define I2C_SCL 22
+        #define IRQ_PIN 35
+    #endif
 #endif
 
 #ifdef HAS_AXP192
@@ -54,8 +62,13 @@ namespace POWER_Utils {
         #endif
 
         #ifdef HAS_AXP2101
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                PMU.setALDO4Voltage(3300);
+                PMU.enableALDO4();
+            #else
                 PMU.setALDO3Voltage(3300);
                 PMU.enableALDO3();
+            #endif
         #endif
         #ifdef HELTEC_WIRELESS_TRACKER
             digitalWrite(VEXT_CTRL, HIGH);
@@ -69,7 +82,11 @@ namespace POWER_Utils {
         #endif
 
         #ifdef HAS_AXP2101
-            PMU.disableALDO3();
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                PMU.disableALDO4();
+            #else
+                PMU.disableALDO3();
+            #endif
         #endif
         #ifdef HELTEC_WIRELESS_TRACKER
             digitalWrite(VEXT_CTRL, LOW);
@@ -83,8 +100,13 @@ namespace POWER_Utils {
             PMU.enableLDO2();
         #endif
         #ifdef HAS_AXP2101
-            PMU.setALDO2Voltage(3300);
-            PMU.enableALDO2();
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                PMU.setALDO3Voltage(3300);
+                PMU.enableALDO3();
+            #else
+                PMU.setALDO2Voltage(3300);
+                PMU.enableALDO2();
+            #endif
         #endif
     }
 
@@ -93,7 +115,11 @@ namespace POWER_Utils {
             PMU.disableLDO2();
         #endif
         #ifdef HAS_AXP2101
-            PMU.disableALDO2();
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                PMU.disableALDO3();
+            #else
+                PMU.disableALDO2();
+            #endif
         #endif
     }
 
@@ -111,20 +137,29 @@ namespace POWER_Utils {
             }
             return result;
         #elif defined(HAS_AXP2101)
-            bool result = PMU.begin(Wire, AXP2101_SLAVE_ADDRESS, I2C_SDA, I2C_SCL);
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                bool result = PMU.begin(Wire1, AXP2101_SLAVE_ADDRESS, I2C1_SDA, I2C1_SCL);
+            #else
+                bool result = PMU.begin(Wire, AXP2101_SLAVE_ADDRESS, I2C_SDA, I2C_SCL);
+            #endif
             if (result) {
                 PMU.disableDC2();
                 PMU.disableDC3();
                 PMU.disableDC4();
                 PMU.disableDC5();
-                PMU.disableALDO1();
-                PMU.disableALDO4();
+                #ifndef TTGO_T_Beam_S3_SUPREME_V3
+                    PMU.disableALDO1();
+                    PMU.disableALDO4();
+                #endif
                 PMU.disableBLDO1();
                 PMU.disableBLDO2();
                 PMU.disableDLDO1();
                 PMU.disableDLDO2();
                 PMU.setDC1Voltage(3300);
                 PMU.enableDC1();
+                #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                    PMU.setALDO1Voltage(3300);
+                #endif
                 PMU.setButtonBatteryChargeVoltage(3300);
                 PMU.enableButtonBatteryCharge();
                 PMU.disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
@@ -152,8 +187,16 @@ namespace POWER_Utils {
         #endif
 
         #ifdef HAS_AXP2101
-            Wire.begin(SDA, SCL);
-            if (begin(Wire)) {
+            bool beginStatus = false;
+            #ifdef TTGO_T_Beam_S3_SUPREME_V3
+                Wire1.begin(I2C1_SDA, I2C1_SCL);
+                Wire.begin(I2C0_SDA, I2C0_SCL);
+                if (begin(Wire1)) beginStatus = true;
+            #else
+                Wire.begin(SDA, SCL);
+                if (begin(Wire)) beginStatus = true;
+            #endif
+            if (beginStatus) {
                 Serial.println("AXP2101 init done!");
             } else {
                 Serial.println("AXP2101 init failed!");
@@ -181,16 +224,16 @@ namespace POWER_Utils {
 
         #ifdef VEXT_CTRL
             pinMode(VEXT_CTRL,OUTPUT); // GPS + TFT on HELTEC Wireless_Tracker and only for Oled in HELTEC V3
-            #ifndef HELTEC_WSL_V3
+            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3)
                 digitalWrite(VEXT_CTRL, HIGH);
             #endif
-            #ifdef HELTEC_WP
+            #if defined(HELTEC_WP) || defined(HELTEC_WS) || defined(HELTEC_V3_2)
                 digitalWrite(VEXT_CTRL, LOW);
             #endif
         #endif
         
         #ifdef HAS_GPS
-            if (Config.beacon.gpsActive) activateGPS();
+            if (Config.beacon.gpsActive && Config.digi.ecoMode != 1) activateGPS();
         #endif
 
         #ifdef ADC_CTRL
@@ -201,17 +244,34 @@ namespace POWER_Utils {
             Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
-        #if defined(HELTEC_V3) || defined(HELTEC_WP) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(TTGO_LORA32_T3S3_V1_2) || defined(HELTEC_V2)
+            Wire.begin(OLED_SDA, OLED_SCL);
+        #endif
+
+        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WP) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
             Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
-        #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(TTGO_LORA32_T3S3_V1_2)
-            Wire.begin(OLED_SDA, OLED_SCL);
+        #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
+            pinMode(BOARD_POWERON, OUTPUT);
+            digitalWrite(BOARD_POWERON, HIGH);
+
+            pinMode(BOARD_SDCARD_CS, OUTPUT);
+            pinMode(RADIO_CS_PIN, OUTPUT);
+            pinMode(TFT_CS, OUTPUT);
+
+            digitalWrite(BOARD_SDCARD_CS, HIGH);
+            digitalWrite(RADIO_CS_PIN, HIGH);
+            digitalWrite(TFT_CS, HIGH);
+
+            delay(500);
+            Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
         
         delay(1000);
         BATTERY_Utils::setup();
         BATTERY_Utils::startupBatteryHealth();
+        setCpuFrequencyMhz(80);
     }
 
 }

src/query_utils.cpp

@@ -1,4 +1,5 @@
 #include "configuration.h"
+#include "battery_utils.h"
 #include "station_utils.h"
 #include "query_utils.h"
 #include "lora_utils.h"
@@ -10,6 +11,8 @@ extern String                           versionDate;
 extern int                              rssi;
 extern float                            snr;
 extern int                              freqError;
+extern bool                             shouldSleepLowVoltage;
+extern bool                             saveNewDigiEcoModeConfig;
 
 
 namespace QUERY_Utils {
@@ -19,9 +22,9 @@ namespace QUERY_Utils {
         String queryQuestion = query;
         queryQuestion.toUpperCase();
         if (queryQuestion == "?APRS?" || queryQuestion == "H" || queryQuestion == "HELP" || queryQuestion=="?") {
-            answer.concat("?APRSV ?APRSP ?APRSL ?APRSH ?WHERE callsign");
+            answer.concat("?APRSV ?APRSP ?APRSL ?APRSSSR ?EM=? ?TX=? "); // ?APRSH ?WHERE callsign
         } else if (queryQuestion == "?APRSV") {
-            answer.concat("CA2RXU_LoRa_iGate 2.0 v");
+            answer.concat("CA2RXU_LoRa_iGate 2.3 v");
             answer.concat(versionDate);
         } else if (queryQuestion == "?APRSP") {
             answer.concat("iGate QTH: ");
@@ -43,25 +46,75 @@ namespace QUERY_Utils {
             char signalData[35];
             snprintf(signalData, sizeof(signalData), " %ddBm / %.2fdB / %dHz", rssi, snr, freqError);
             answer.concat(signalData);        
-        } else if (queryQuestion.indexOf("?APRSH") == 0) {
+        } /*else if (queryQuestion.indexOf("?APRSH") == 0) {
             // sacar callsign despues de ?APRSH
             Serial.println("escuchaste a X estacion? en las ultimas 24 o 8 horas?");
             answer.concat("?APRSH on development 73!");
-        } else if (queryQuestion.indexOf("?WHERE") == 0) { 
+        } *//*else if (queryQuestion.indexOf("?WHERE") == 0) { 
             // agregar callsign para completar donde esta X callsign --> posicion
             Serial.println("estaciones escuchadas directo (ultimos 30 min)");
             answer.concat("?WHERE on development 73!");
-        } else if (queryQuestion.indexOf("?APRSEEM") == 0 && Config.digi.ecoMode == true) {    // Exit Digipeater EcoMode
-            answer = "DigiEcoMode:Stop";
-            Config.digi.ecoMode     = false;
-            Config.display.alwaysOn = true;
-            Config.display.timeout  = 10;
-        } else if (queryQuestion.indexOf("?APRSSEM") == 0 && Config.digi.ecoMode == false) {    // Start Digipeater EcoMode
-            answer = "DigiEcoMode:Start";
-            Config.digi.ecoMode     = true;
-        } else if (queryQuestion.indexOf("?APRSEMS") == 0) {    // Digipeater EcoMode Status
-            answer = (Config.digi.ecoMode) ? "DigiEcoMode:ON" : "DigiEcoMode:OFF";
+        } */
+        else if (STATION_Utils::isManager(station) && (!queryFromAPRSIS || !Config.remoteManagement.rfOnly)) {
+            if (queryQuestion.indexOf("?EM=OFF") == 0) {
+                if ((Config.digi.mode == 2 || Config.digi.mode == 3) && Config.loramodule.txActive && Config.loramodule.rxActive && !Config.aprs_is.active) {
+                    if (Config.digi.ecoMode == 1) {     // Exit Digipeater EcoMode
+                        answer = "DigiEcoMode:OFF";
+                        Config.digi.ecoMode         = 0;
+                        Config.display.alwaysOn     = true;
+                        Config.display.timeout      = 10;
+                        shouldSleepLowVoltage       = true;     // to make sure all packets in outputPacketBuffer are sended before restart.
+                        saveNewDigiEcoModeConfig    = true;
+                    } else {
+                        answer = "DigiEcoMode was OFF";
+                    }
+                } else {
+                    answer = "DigiEcoMode control not possible";
+                }
+            } else if (queryQuestion.indexOf("?EM=ON") == 0) {
+                if ((Config.digi.mode == 2 || Config.digi.mode == 3) && Config.loramodule.txActive && Config.loramodule.rxActive && !Config.aprs_is.active) {
+                    if (Config.digi.ecoMode == 0) {     // Start Digipeater EcoMode
+                        answer = "DigiEcoMode:ON";
+                        Config.digi.ecoMode         = 1;
+                        shouldSleepLowVoltage       = true;     // to make sure all packets in outputPacketBuffer are sended before restart.
+                        saveNewDigiEcoModeConfig    = true;
+                    } else {
+                        answer = "DigiEcoMode was ON";
+                    }
+                } else {
+                    answer = "DigiEcoMode control not possible";
+                }
+            } else if (queryQuestion.indexOf("?EM=?") == 0) {    // Digipeater EcoMode Status
+                if (Config.digi.ecoMode == 0) {
+                    answer = "DigiEcoMode:OFF";
+                } else if (Config.digi.ecoMode == 1) {
+                    answer = "DigiEcoMode:ON";
+                } else {
+                    answer = "DigiEcoMode:OFF/Only Serial Output";
+                }
+            } else  if (queryQuestion.indexOf("?TX=ON") == 0) {
+                if (Config.loramodule.txActive) {
+                    answer = "TX was ON";
+                } else {
+                    Config.loramodule.txActive = true;
+                    answer = "TX=ON";
+                }
+            } else if (queryQuestion.indexOf("?TX=OFF") == 0) {
+                if (!Config.loramodule.txActive) {
+                    answer = "TX was OFF";
+                } else {
+                    Config.loramodule.txActive = false;
+                    answer = "TX=OFF";
+                } 
+            } else if (queryQuestion.indexOf("?TX=?") == 0) {
+                answer = (Config.loramodule.txActive) ? "TX=ON" : "TX=OFF";
+            } else if (queryQuestion.indexOf("?COMMIT") == 0) {     // saving for next reboot
+                answer = "New Config Saved";
+                Config.writeFile();
+            }
         }
+        
+        if (answer == "") return "";
 
         String queryAnswer = Config.callsign;
         queryAnswer += ">APLRG1";
@@ -83,6 +136,11 @@ namespace QUERY_Utils {
         queryAnswer += processedStation;
         queryAnswer += ":";
         queryAnswer += answer;
+
+        queryAnswer += " *";
+        queryAnswer += char(random(97, 123));
+        queryAnswer += char(random(97, 123));
+        queryAnswer += "*";
         return queryAnswer;
     }
 

src/sleep_utils.cpp

@@ -0,0 +1,63 @@
+#include "configuration.h"
+#include "board_pinout.h"
+#include "sleep_utils.h"
+#include "digi_utils.h"
+#include "lora_utils.h"
+
+
+extern  Configuration   Config;
+extern  bool            shouldSleepStop;
+extern  uint32_t        lastBeaconTx;
+
+bool    wakeUpFlag      = false;
+
+
+namespace SLEEP_Utils {
+
+    void wakeUpLoRaPacketReceived() {
+        wakeUpFlag = true;
+    }
+
+    void checkWakeUpFlag() {
+        if (wakeUpFlag) {
+            String packet = LoRa_Utils::receivePacketFromSleep();
+            if (packet != "") {
+                DIGI_Utils::processLoRaPacket(packet);
+            }
+            wakeUpFlag = false;
+        }
+    }
+    
+    void setup() {
+        if (Config.digi.ecoMode == 1) {
+            pinMode(RADIO_WAKEUP_PIN, INPUT);
+            attachInterrupt(digitalPinToInterrupt(RADIO_WAKEUP_PIN), wakeUpLoRaPacketReceived, RISING);
+            LoRa_Utils::wakeRadio();
+            #if defined(TTGO_LORA32_V2_1) || defined(TTGO_LORA32_V2_1_915) || defined(TTGO_LORA32_T3S3_V1_2) || defined(TTGO_T_BEAM_V1_0) || defined(TTGO_T_BEAM_V1_0_915) || defined(TTGO_T_BEAM_V1_0_SX1268) || defined(TTGO_T_BEAM_V1_2) || defined(TTGO_T_BEAM_V1_2_915) || defined(TTGO_T_BEAM_V1_2_SX1262) || defined(TTGO_T_DECK_PLUS) || defined(TTGO_T_DECK_GPS) || defined(TTGO_T_Beam_S3_SUPREME_V3) || defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WP) || defined(HELTEC_WS) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V2) || defined(XIAO_ESP32S3_LORA) || defined(LIGHTGATEWAY_1_0) || defined(TROY_LoRa_APRS) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2) || defined(WEMOS_S2_MINI_DIY_LoRa) || defined(WEMOS_D1_R32_RA02) || defined(WEMOS_LOLIN32_OLED_DIY_LoRa)
+                esp_sleep_enable_ext1_wakeup(GPIO_WAKEUP_PIN, ESP_EXT1_WAKEUP_ANY_HIGH);
+            #endif
+            #if defined(HELTEC_HTCT62) || defined(ESP32C3_DIY_1W_LoRa) || defined(ESP32C3_DIY_1W_LoRa_915) || defined(ESP32_C3_OctopusLab_LoRa)
+                esp_deep_sleep_enable_gpio_wakeup(1ULL << GPIO_WAKEUP_PIN, ESP_GPIO_WAKEUP_GPIO_HIGH);
+            #endif
+        }
+    }
+
+    uint32_t getSecondsToSleep() {
+        uint32_t elapsedTime    = (millis() - lastBeaconTx) / 1000; // in secs
+        uint32_t intervalTime   = Config.beacon.interval * 60;      // in secs
+        return (elapsedTime < intervalTime) ? (intervalTime - elapsedTime) : 0;
+    }
+
+    void startSleeping() {
+        if (!shouldSleepStop) {
+            uint32_t timeToSleep = getSecondsToSleep();
+            esp_sleep_enable_timer_wakeup(timeToSleep * 1000000);   // 1 min = 60sec
+            Serial.print("(Sleeping : "); Serial.print(timeToSleep); Serial.println("seconds)");
+            delay(100);
+            LoRa_Utils::wakeRadio();
+            esp_light_sleep_start();
+        }
+        
+    }
+
+}

src/station_utils.cpp

@@ -7,6 +7,7 @@
 #include "utils.h"
 #include <vector>
 
+
 extern Configuration            Config;
 extern uint32_t                 lastRxTime;
 extern String                   fourthLine;
@@ -16,10 +17,84 @@ uint32_t lastTxTime             = millis();
 std::vector<LastHeardStation>   lastHeardStations;
 std::vector<String>             outputPacketBuffer;
 std::vector<Packet25SegBuffer>  packet25SegBuffer;
+std::vector<String>             blacklist;
+std::vector<String>             managers;
+std::vector<LastHeardStation>   lastHeardObjects;
+
+bool saveNewDigiEcoModeConfig   = false;
 
 
 namespace STATION_Utils {
 
+    std::vector<String> loadCallSignList(const String& list) {
+        std::vector<String> loadedList;
+
+        String callsigns = list;
+        callsigns.trim();
+
+        while (callsigns.length() > 0) {    // != ""
+            int spaceIndex = callsigns.indexOf(" ");
+            if (spaceIndex == -1) {         // No more spaces, add the last part
+                loadedList.push_back(callsigns);
+                break;
+            }
+            loadedList.push_back(callsigns.substring(0, spaceIndex));
+            callsigns = callsigns.substring(spaceIndex + 1);
+            callsigns.trim();               // Trim in case of multiple spaces
+        }
+        return loadedList;
+    }
+
+    void loadBlacklistAndManagers() {
+        blacklist   = loadCallSignList(Config.blacklist);
+        managers    = loadCallSignList(Config.remoteManagement.managers);
+    }
+
+    bool checkCallsignList(const std::vector<String>& list, const String& callsign) {
+        for (int i = 0; i < list.size(); i++) {
+            int wildcardIndex = list[i].indexOf("*");
+            if (wildcardIndex >= 0) {
+                String wildcard = list[i].substring(0, wildcardIndex);
+                if (callsign.startsWith(wildcard)) return true;
+            } else {
+                if (list[i] == callsign) return true;
+            }                
+        }
+        return false;
+    }    
+
+    bool isBlacklisted(const String& callsign) {
+        return checkCallsignList(blacklist, callsign);
+    }
+
+    bool isManager(const String& callsign) {
+        return checkCallsignList(managers, callsign);
+    }
+
+    void cleanObjectsHeard() {
+        for (auto it = lastHeardObjects.begin(); it != lastHeardObjects.end(); ) {
+            if (millis() - it->lastHeardTime >= 9.75 * 60 * 1000) { // 9.75 = 9min 45secs
+                it = lastHeardObjects.erase(it);    // erase() returns the next valid iterator
+            } else {
+                ++it;                               // Only increment if not erasing
+            }
+        }
+    }
+
+    bool checkObjectTime(const String& packet) {
+        cleanObjectsHeard();
+
+        int objectIDIndex = packet.indexOf(":;");
+        String object = packet.substring(objectIDIndex + 2, objectIDIndex + 11);
+        object.trim();
+
+        for (int i = 0; i < lastHeardObjects.size(); i++) {                 // Check if i should Tx object
+            if (lastHeardObjects[i].station == object) return false;
+        }
+        lastHeardObjects.emplace_back(LastHeardStation{millis(), object});  // Add new object and Tx
+        return true;
+    }
+    
     void deleteNotHeard() {
         std::vector<LastHeardStation>  lastHeardStation_temp;
         for (int i = 0; i < lastHeardStations.size(); i++) {
@@ -41,22 +116,11 @@ namespace STATION_Utils {
             if (lastHeardStations[i].station == station) {
                 lastHeardStations[i].lastHeardTime = millis();
                 stationHeard = true;
+                break;
             }
         }
-        if (!stationHeard) {
-            LastHeardStation lastStation;
-            lastStation.lastHeardTime   = millis();
-            lastStation.station         = station;
-            lastHeardStations.push_back(lastStation);
-        }
-
-        fourthLine = "Stations (";
-        fourthLine += String(Config.rememberStationTime);
-        fourthLine += "min) = ";
-        if (lastHeardStations.size() < 10) {
-            fourthLine += " ";
-        }
-        fourthLine += String(lastHeardStations.size());
+        if (!stationHeard) lastHeardStations.emplace_back(LastHeardStation{millis(), station});
+        Utils::activeStations();
     }
 
     bool wasHeard(const String& station) {
@@ -67,50 +131,48 @@ namespace STATION_Utils {
                 return true;
             }
         }
-        Utils::println(" ---> Station not Heard for last 30 min (Not Tx)\n");
+        Utils::println(" ---> Station not Heard in " + String(Config.rememberStationTime) + " min: No Tx");
         return false;
     }
 
     void clean25SegBuffer() {
-        if (!packet25SegBuffer.empty()) {
-            if ((millis() - packet25SegBuffer[0].receivedTime) >  25 * 1000) {
-                packet25SegBuffer.erase(packet25SegBuffer.begin());
-            }
-        }
+        if (!packet25SegBuffer.empty() && (millis() - packet25SegBuffer[0].receivedTime) >  25 * 1000) packet25SegBuffer.erase(packet25SegBuffer.begin());
     }
 
     bool check25SegBuffer(const String& station, const String& textMessage) {
-        bool shouldBeIgnored = false;
         if (!packet25SegBuffer.empty()) {
             for (int i = 0; i < packet25SegBuffer.size(); i++) {
-                if (packet25SegBuffer[i].station == station && packet25SegBuffer[i].payload == textMessage) {
-                    shouldBeIgnored = true;
-                }
+                if (packet25SegBuffer[i].station == station && packet25SegBuffer[i].payload == textMessage) return false;
             }
         }
-        if (shouldBeIgnored) {
-            return false;
-        } else {
-            Packet25SegBuffer packet;
-            packet.receivedTime = millis();
-            packet.station      = station;
-            packet.payload      = textMessage;
-            packet25SegBuffer.push_back(packet);
-            return true;
+        packet25SegBuffer.emplace_back(Packet25SegBuffer{millis(), station, textMessage});
+        return true;
+    }
+
+    void processOutputPacketBufferUltraEcoMode() { 
+        size_t currentIndex = 0;
+        while (currentIndex < outputPacketBuffer.size()) {                  // this sends all packets from output buffer
+            delay(3000);                                                    // and cleans buffer to avoid sending packets with time offset
+            LoRa_Utils::sendNewPacket(outputPacketBuffer[currentIndex]);    // next time it wakes up
+            currentIndex++;
+        }                               
+        outputPacketBuffer.clear();
+        //
+        if (saveNewDigiEcoModeConfig) {
+            Config.writeFile();
+            delay(1000);
+            displayToggle(false);
+            ESP.restart();
         }
+        //
     }
 
     void processOutputPacketBuffer() {
         int timeToWait                  = 3 * 1000;      // 3 segs between packet Tx and also Rx ???
         uint32_t lastRx                 = millis() - lastRxTime;
         uint32_t lastTx                 = millis() - lastTxTime;
-        bool saveNewDigiEcoModeConfig   = false;
         if (outputPacketBuffer.size() > 0 && lastTx > timeToWait && lastRx > timeToWait) {
             LoRa_Utils::sendNewPacket(outputPacketBuffer[0]);
-            if (outputPacketBuffer[0].indexOf("DigiEcoMode:Start") != -1 || outputPacketBuffer[0].indexOf("DigiEcoMode:Stop") != -1) {
-                saveNewDigiEcoModeConfig    = true;
-                shouldSleepLowVoltage       = true; // to make sure all packets in outputPacketBuffer are sended before restart.
-            }
             outputPacketBuffer.erase(outputPacketBuffer.begin());
             lastTxTime = millis();
         }
@@ -123,6 +185,7 @@ namespace STATION_Utils {
         }
         if (saveNewDigiEcoModeConfig) {
             Config.writeFile();
+            delay(1000);
             displayToggle(false);
             ESP.restart();
         }

src/syslog_utils.cpp

@@ -4,6 +4,7 @@
 #include "syslog_utils.h"
 #include "gps_utils.h"
 
+
 extern Configuration    Config;
 
 WiFiUDP udpClient;
@@ -20,6 +21,10 @@ namespace SYSLOG_Utils {
             char signalData[35];
             snprintf(signalData, sizeof(signalData), " / %ddBm / %.2fdB / %dHz", rssi, snr, freqError);
 
+            int colonIndex  = packet.indexOf(":");
+            char nextChar   = packet[colonIndex + 1];
+            String sender   = packet.substring(3, packet.indexOf(">"));
+
             switch (type) {
                 case 0:     // CRC
                     syslogPacket.concat("CRC / CRC-ERROR / ");
@@ -28,59 +33,57 @@ namespace SYSLOG_Utils {
                     break;
                 case 1:     // RX
                     syslogPacket.concat("RX / ");
-                    if (packet.indexOf("::") > 10) {
+                    if (nextChar == ':') {
                         syslogPacket.concat("MESSAGE / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
-                        syslogPacket.concat(" ---> "); syslogPacket.concat(packet.substring(packet.indexOf("::") + 2));
-                        syslogPacket.concat(signalData);
-                    } else if (packet.indexOf(":!") > 10 || packet.indexOf(":=") > 10) {
+                        syslogPacket.concat(sender);
+                        syslogPacket.concat(" ---> "); 
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
+                    } else if (nextChar == '!' || nextChar == '=' || nextChar == '@') {
                         syslogPacket.concat("GPS / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
+                        syslogPacket.concat(sender);
                         syslogPacket.concat(" / ");
+                        int greaterThanIndex = packet.indexOf(">");
                         if (packet.indexOf("WIDE1-1") > 10) {
-                            syslogPacket.concat(packet.substring(packet.indexOf(">") + 1, packet.indexOf(",")));
+                            syslogPacket.concat(packet.substring(greaterThanIndex + 1, packet.indexOf(",")));
                             syslogPacket.concat(" / WIDE1-1");
                         } else {
-                            syslogPacket.concat(packet.substring(packet.indexOf(">") + 1, packet.indexOf(":")));
+                            syslogPacket.concat(packet.substring(greaterThanIndex + 1, colonIndex));
                             syslogPacket.concat(" / -");
                         }
-                        syslogPacket.concat(signalData);
-                        syslogPacket.concat(" / ");
-                        syslogPacket.concat(GPS_Utils::getDistanceAndComment(packet));
-                    } else if (packet.indexOf(":>") > 10) {
+                    } else if (nextChar == '>') {
                         syslogPacket.concat("STATUS / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
+                        syslogPacket.concat(sender);
                         syslogPacket.concat(" ---> ");
-                        syslogPacket.concat(packet.substring(packet.indexOf(":>") + 2));
-                        syslogPacket.concat(signalData);
-                    } else if (packet.indexOf(":`") > 10) {
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
+                    } else if (nextChar == '`') {
                         syslogPacket.concat("MIC-E / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
+                        syslogPacket.concat(sender);
                         syslogPacket.concat(" ---> ");
-                        syslogPacket.concat(packet.substring(packet.indexOf(":`") + 2));
-                        syslogPacket.concat(signalData);
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
+                    } else if (nextChar == ';') {
+                        syslogPacket.concat("OBJECT / ");
+                        syslogPacket.concat(sender);
+                        syslogPacket.concat(" ---> ");
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
                     } else if (packet.indexOf(":T#") >= 10 && packet.indexOf(":=/") == -1) {
                         syslogPacket.concat("TELEMETRY / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
+                        syslogPacket.concat(sender);
                         syslogPacket.concat(" ---> ");
                         syslogPacket.concat(packet.substring(packet.indexOf(":T#") + 3));
-                        syslogPacket.concat(signalData);
-                    } else if (packet.indexOf(":;") > 10) {
-                        syslogPacket.concat("OBJECT / ");
-                        syslogPacket.concat(packet.substring(3, packet.indexOf(">")));
-                        syslogPacket.concat(" ---> ");
-                        syslogPacket.concat(packet.substring(packet.indexOf(":;") + 2));
-                        syslogPacket.concat(signalData);
                     } else {
                         syslogPacket.concat(packet);
-                        syslogPacket.concat(signalData);
+                    }
+                    syslogPacket.concat(signalData);
+                    if (nextChar == '!' || nextChar == '=' || nextChar == '@') {
+                        syslogPacket.concat(" / ");
+                        syslogPacket.concat(GPS_Utils::getDistanceAndComment(packet));
                     }
                     break;
                 case 2:     // APRSIS TX
                     syslogPacket.concat("APRSIS TX / ");
-                    if (packet.indexOf(":>") > 10) {
+                    if (nextChar == '>') {
                         syslogPacket.concat("StartUp_Status / ");
-                        syslogPacket.concat(packet.substring(packet.indexOf(":>") + 2));
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
                     } else {
                         syslogPacket.concat("QUERY / ");
                         syslogPacket.concat(packet);
@@ -91,11 +94,11 @@ namespace SYSLOG_Utils {
                     if (packet.indexOf("RFONLY") > 10) {
                         syslogPacket.concat("RFONLY / ");
                         syslogPacket.concat(packet);
-                    } else if (packet.indexOf("::") > 10) {
+                    } else if (nextChar == ':') {
                         syslogPacket.concat("MESSAGE / ");
-                        syslogPacket.concat(packet.substring(0,packet.indexOf(">")));
+                        syslogPacket.concat(sender);
                         syslogPacket.concat(" ---> ");
-                        syslogPacket.concat(packet.substring(packet.indexOf("::") + 2));
+                        syslogPacket.concat(packet.substring(colonIndex + 2));
                     } else {
                         syslogPacket.concat(packet);
                     }

src/tnc_utils.cpp

@@ -5,6 +5,7 @@
 #include "station_utils.h"
 #include "utils.h"
 
+
 extern Configuration        Config;
 
 #define MAX_CLIENTS 4
@@ -23,7 +24,7 @@ String inputSerialBuffer = "";
 namespace TNC_Utils {
     
     void setup() {
-        if (Config.tnc.enableServer && !Config.digi.ecoMode) {
+        if (Config.tnc.enableServer && Config.digi.ecoMode == 0) {
             tncServer.stop();
             tncServer.begin();
         }
@@ -44,16 +45,9 @@ namespace TNC_Utils {
     }
 
     void handleInputData(char character, int bufferIndex) {
-        String* data;
-        if (bufferIndex == -1) {
-            data = &inputSerialBuffer;
-        } else {
-            data = &inputServerBuffer[bufferIndex];
-        }
-        if (data->length() == 0 && character != (char)FEND) {
-            return;
-        }
-
+        String* data = (bufferIndex == -1) ? &inputSerialBuffer : &inputServerBuffer[bufferIndex];
+        if (data->length() == 0 && character != (char)FEND) return;
+        
         data->concat(character);
 
         if (character == (char)FEND && data->length() > 3) {
@@ -134,7 +128,7 @@ namespace TNC_Utils {
     }
 
     void loop() {
-        if (!Config.digi.ecoMode) {
+        if (Config.digi.ecoMode == 0) {
             if (Config.tnc.enableServer) {
                 checkNewClients();
                 readFromClients();

src/utils.cpp

@@ -37,12 +37,13 @@ extern int                  wxModuleType;
 extern bool                 backUpDigiMode;
 extern bool                 shouldSleepLowVoltage;
 extern bool                 transmitFlag;
+extern bool                 passcodeValid;
 
 extern std::vector<LastHeardStation>    lastHeardStations;
 
 bool        statusAfterBoot     = true;
 bool        sendStartTelemetry  = true;
-bool        beaconUpdate        = true;
+bool        beaconUpdate        = false;
 uint32_t    lastBeaconTx        = 0;
 uint32_t    lastScreenOn        = millis();
 String      beaconPacket;
@@ -75,7 +76,7 @@ namespace Utils {
     }
 
     String getLocalIP() {
-        if (Config.digi.ecoMode) {
+        if (Config.digi.ecoMode == 1 || Config.digi.ecoMode == 2) {
             return "** WiFi AP  Killed **";
         } else if (!WiFiConnected) {
             return "IP :  192.168.4.1";
@@ -92,7 +93,14 @@ namespace Utils {
             digitalWrite(INTERNAL_LED_PIN,HIGH);
         #endif
         Serial.println("\nStarting Station: " + Config.callsign + "   Version: " + versionDate);
-        Serial.println((Config.digi.ecoMode) ? "(DigiEcoMode: ON)" : "(DigiEcoMode: OFF)");
+        Serial.print("(DigiEcoMode: ");
+        if (Config.digi.ecoMode == 0) {
+            Serial.println("OFF)");
+        } else if (Config.digi.ecoMode == 1) {
+            Serial.println("ON)");
+        } else {
+            Serial.println("ON / Only Serial Output)");
+        }
         displayShow(" LoRa APRS", "", "", "   ( iGATE & DIGI )", "", "" , "  CA2RXU  " + versionDate, 4000);
         #ifdef INTERNAL_LED_PIN
             digitalWrite(INTERNAL_LED_PIN,LOW);
@@ -102,20 +110,15 @@ namespace Utils {
     }
 
     void activeStations() {
-        fourthLine = "Stations (";
-        fourthLine.concat(String(Config.rememberStationTime));
-        fourthLine.concat("min) = ");
-        if (lastHeardStations.size() < 10) {
-            fourthLine += " ";
-        }
-        fourthLine.concat(String(lastHeardStations.size()));
+        char buffer[30]; // Adjust size as needed
+        sprintf(buffer, "Stations (%dmin) = %2d", Config.rememberStationTime, lastHeardStations.size());
+        fourthLine = buffer;
     }
 
     void sendInitialTelemetryPackets() {
-        String sender = Config.callsign;
-        for (int i = sender.length(); i < 9; i++) {
-            sender += ' ';
-        }
+        char sender[10];                                                    // 9 characters + null terminator
+        snprintf(sender, sizeof(sender), "%-9s", Config.callsign.c_str());  // Left-align with spaces
+
         String baseAPRSISTelemetryPacket = Config.callsign;
         baseAPRSISTelemetryPacket += ">APLRG1,TCPIP,qAC::";
         baseAPRSISTelemetryPacket += sender;
@@ -136,7 +139,7 @@ namespace Utils {
             telemetryPacket1 += "0,0.01,0";
         }
         if (Config.battery.sendExternalVoltage) {
-            telemetryPacket1 += String(Config.battery.sendInternalVoltage ? "," : "") + "0,0.02,0";
+            telemetryPacket1 += String(Config.battery.sendInternalVoltage ? ",0,0.02,0" : "0,0.02,0");
         }
 
         String telemetryPacket2 = "UNIT.";
@@ -144,7 +147,7 @@ namespace Utils {
             telemetryPacket2 += "VDC";
         }
         if (Config.battery.sendExternalVoltage) {
-            telemetryPacket2 += String(Config.battery.sendInternalVoltage ? "," : "") + "VDC";
+            telemetryPacket2 += String(Config.battery.sendInternalVoltage ? ",VDC" : "VDC");
         }
 
         String telemetryPacket3 = "PARM.";
@@ -152,7 +155,7 @@ namespace Utils {
             telemetryPacket3 += "V_Batt";
         }
         if (Config.battery.sendExternalVoltage) {
-            telemetryPacket3 += String(Config.battery.sendInternalVoltage ? "," : "") + "V_Ext";
+            telemetryPacket3 += String(Config.battery.sendInternalVoltage ? ",V_Ext" : "V_Ext");
         }
 
         if (Config.beacon.sendViaAPRSIS) {
@@ -197,11 +200,13 @@ namespace Utils {
         #endif
 
         if (beaconUpdate) {
-            if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                displayToggle(true);
-            }
+            if (!Config.display.alwaysOn && Config.display.timeout != 0) displayToggle(true);
 
-            if (sendStartTelemetry && Config.battery.sendVoltageAsTelemetry && !Config.wxsensor.active && (Config.battery.sendInternalVoltage || Config.battery.sendExternalVoltage)) {
+            if (sendStartTelemetry && 
+                Config.battery.sendVoltageAsTelemetry &&
+                !Config.wxsensor.active && 
+                (Config.battery.sendInternalVoltage || Config.battery.sendExternalVoltage) &&
+                (lastBeaconTx > 0)) {
                 sendInitialTelemetryPackets();
             }
 
@@ -212,7 +217,7 @@ namespace Utils {
             beaconPacket            = iGateBeaconPacket;
             secondaryBeaconPacket   = iGateLoRaBeaconPacket;
             #ifdef HAS_GPS
-                if (Config.beacon.gpsActive && !Config.digi.ecoMode) {
+                if (Config.beacon.gpsActive && Config.digi.ecoMode == 0) {
                     GPS_Utils::getData();
                     if (gps.location.isUpdated() && gps.location.lat() != 0.0 && gps.location.lng() != 0.0) {
                         GPS_Utils::generateBeaconFirstPart();
@@ -223,13 +228,10 @@ namespace Utils {
                 }
             #endif
 
-            if (Config.wxsensor.active && wxModuleType != 0) {
-                String sensorData = WX_Utils::readDataSensor();
-                beaconPacket += sensorData;
-                secondaryBeaconPacket += sensorData;
-            } else if (Config.wxsensor.active && wxModuleType == 0) {
-                beaconPacket += ".../...g...t...";
-                secondaryBeaconPacket += ".../...g...t...";
+            if (Config.wxsensor.active) {
+                const char* sensorData = (wxModuleType == 0) ? ".../...g...t..." : WX_Utils::readDataSensor().c_str();
+                beaconPacket            += sensorData;
+                secondaryBeaconPacket   += sensorData;
             }
             beaconPacket            += Config.beacon.comment;
             secondaryBeaconPacket   += Config.beacon.comment;
@@ -243,11 +245,14 @@ namespace Utils {
                         shouldSleepLowVoltage   = true;
                     }
 
-                    String internalVoltageInfo  = String(internalVoltage,2) + "V";
                     if (Config.battery.sendInternalVoltage) {
-                        sixthLine               = "    (Batt=";
-                        sixthLine               += internalVoltageInfo;
-                        sixthLine               += ")";
+                        char internalVoltageInfo[10];   // Enough to hold "xx.xxV\0"
+                        snprintf(internalVoltageInfo, sizeof(internalVoltageInfo), "%.2fV", internalVoltage);
+
+                        char sixthLineBuffer[25];       // Enough to hold "    (Batt=xx.xxV)"
+                        snprintf(sixthLineBuffer, sizeof(sixthLineBuffer), "    (Batt=%s)", internalVoltageInfo);
+                        sixthLine = sixthLineBuffer;
+
                         if (!Config.battery.sendVoltageAsTelemetry) {
                             beaconPacket            += " Batt=";
                             beaconPacket            += internalVoltageInfo;
@@ -267,11 +272,14 @@ namespace Utils {
                         shouldSleepLowVoltage   = true;
                     }
 
-                    String externalVoltageInfo  = String(externalVoltage,2) + "V";
                     if (Config.battery.sendExternalVoltage) {
-                        sixthLine               = "    (Ext V=";
-                        sixthLine               += externalVoltageInfo;
-                        sixthLine               += ")";
+                        char externalVoltageInfo[10];  // "xx.xxV\0" (max 7 chars)
+                        snprintf(externalVoltageInfo, sizeof(externalVoltageInfo), "%.2fV", externalVoltage);
+                    
+                        char sixthLineBuffer[25];  // Ensure enough space
+                        snprintf(sixthLineBuffer, sizeof(sixthLineBuffer), "    (Ext V=%s)", externalVoltageInfo);
+                        sixthLine = sixthLineBuffer;
+
                         if (!Config.battery.sendVoltageAsTelemetry) {
                             beaconPacket            += " Ext=";
                             beaconPacket            += externalVoltageInfo;
@@ -288,7 +296,7 @@ namespace Utils {
                 secondaryBeaconPacket += encodedTelemetry;
             }
 
-            if (Config.aprs_is.active && Config.beacon.sendViaAPRSIS && !backUpDigiMode) {
+            if (Config.beacon.sendViaAPRSIS && Config.aprs_is.active && passcodeValid && !backUpDigiMode) {
                 Utils::println("-- Sending Beacon to APRSIS --");
                 displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING IGATE BEACON", 0);
                 seventhLine = "     listening...";
@@ -346,54 +354,45 @@ namespace Utils {
                 fifthLine = "LoRa Rx ----> LoRa Tx";
                 break;
         }
+
+        int firstColonIndex = packet.indexOf(":");
+        char nextChar       = packet[firstColonIndex + 1];
+
         for (int i = sender.length(); i < 9; i++) {
             sender += " ";
         }
         sixthLine = sender;
-        String seventhLineHelper = "RSSI:";
-        seventhLineHelper += String(rssi);
-        seventhLineHelper += "dBm SNR: ";
-        seventhLineHelper += String(snr);
-        seventhLineHelper += "dBm";
 
-        int firstColonIndex = packet.indexOf(":");
-        if (packet[firstColonIndex + 1] == ':') {
+        if (nextChar == ':') {
             sixthLine += "> MESSAGE";
-            seventhLine = seventhLineHelper;
-        } else if (packet[firstColonIndex + 1] == '>') {
+        } else if (nextChar == '>') {
             sixthLine += "> NEW STATUS";
-            seventhLine = seventhLineHelper;
-        } else if (packet[firstColonIndex + 1] == '!' || packet[firstColonIndex + 1] == '=' || packet[firstColonIndex + 1] == '@') {
+        } else if (nextChar == '!' || nextChar == '=' || nextChar == '@') {
             sixthLine += "> GPS BEACON";
-            if (!Config.syslog.active) {
-                GPS_Utils::getDistanceAndComment(packet);       // to be checked!!!
-            }
+            if (!Config.syslog.active) GPS_Utils::getDistanceAndComment(packet);       // to be checked!!!
             seventhLine = "RSSI:";
             seventhLine += String(rssi);
             seventhLine += "dBm";
-            if (rssi <= -100) {
-                seventhLine += " ";
-            } else {
-                seventhLine += "  ";
-            }
-            if (distance.indexOf(".") == 1) {
-                seventhLine += " ";
-            }
+            seventhLine += (rssi <= -100) ? " " : "  ";
+            if (distance.indexOf(".") == 1) seventhLine += " ";
             seventhLine += "D:";
             seventhLine += distance;
             seventhLine += "km";
-        } else if (packet[firstColonIndex + 1] == '`' || packet[firstColonIndex + 1] == '\'') {
+        } else if (nextChar == '`' || nextChar == '\'') {
             sixthLine += ">  MIC-E";
-            seventhLine = seventhLineHelper;
-        } else if (packet[firstColonIndex + 1] == ';') {
+        } else if (nextChar == ';') {
             sixthLine += ">  OBJECT";
-            seventhLine = seventhLineHelper;
         } else if (packet.indexOf(":T#") >= 10 && packet.indexOf(":=/") == -1) {
             sixthLine += "> TELEMETRY";
-            seventhLine = seventhLineHelper;
         } else {
             sixthLine += "> ??????????";
-            seventhLine = seventhLineHelper;
+        }
+        if (nextChar != '!' && nextChar != '=' && nextChar != '@') {    // Common assignment for non-GPS cases
+            seventhLine = "RSSI:";
+            seventhLine += String(rssi);
+            seventhLine += "dBm SNR: ";
+            seventhLine += String(snr);
+            seventhLine += "dBm";
         }
     }
 

src/web_utils.cpp

@@ -5,6 +5,7 @@
 #include "display.h"
 #include "utils.h"
 
+
 extern Configuration               Config;
 extern uint32_t                    lastBeaconTx;
 extern std::vector<ReceivedPacket> receivedPackets;
@@ -140,7 +141,7 @@ namespace WEB_Utils {
 
 
         Config.digi.mode                    = request->getParam("digi.mode", true)->value().toInt();
-        Config.digi.ecoMode                 = request->hasParam("digi.ecoMode", true);
+        Config.digi.ecoMode                 = request->getParam("digi.ecoMode", true)->value().toInt();;
 
 
         Config.loramodule.txFreq            = request->getParam("lora.txFreq", true)->value().toInt();
@@ -201,18 +202,21 @@ namespace WEB_Utils {
         Config.rememberStationTime          = request->getParam("other.rememberStationTime", true)->value().toInt();
 
         Config.backupDigiMode               = request->hasParam("other.backupDigiMode", true);
-        Config.lowPowerMode                 = request->hasParam("other.lowPowerMode", true);
-        Config.lowVoltageCutOff             = request->getParam("other.lowVoltageCutOff", true)->value().toDouble();
 
         Config.personalNote                 = request->getParam("personalNote", true)->value();
 
+        Config.blacklist                    = request->getParam("blacklist", true)->value();
+
         Config.webadmin.active              = request->hasParam("webadmin.active", true);
         if (Config.webadmin.active) {
             Config.webadmin.username        = request->getParam("webadmin.username", true)->value();
             Config.webadmin.password        = request->getParam("webadmin.password", true)->value();
         }
 
-        Config.ntp.gmtCorrection            = request->getParam("ntp.gmtCorrection", true)->value().toInt();
+        Config.ntp.gmtCorrection            = request->getParam("ntp.gmtCorrection", true)->value().toFloat();
+
+        Config.remoteManagement.managers    = request->getParam("remoteManagement.managers", true)->value();
+        Config.remoteManagement.rfOnly      = request->getParam("remoteManagement.rfOnly", true);
 
         Config.writeFile();
 
@@ -220,6 +224,7 @@ namespace WEB_Utils {
         response->addHeader("Location", "/");
         request->send(response);
         displayToggle(false);
+        delay(200);
         ESP.restart();
     }
 
@@ -265,7 +270,7 @@ namespace WEB_Utils {
     }
 
     void setup() {
-        if (!Config.digi.ecoMode) {
+        if (Config.digi.ecoMode == 0) {
             server.on("/", HTTP_GET, handleHome);
             server.on("/status", HTTP_GET, handleStatus);
             server.on("/received-packets.json", HTTP_GET, handleReceivedPackets);

src/wifi_utils.cpp

@@ -5,6 +5,7 @@
 #include "display.h"
 #include "utils.h"
 
+
 extern Configuration    Config;
 
 extern uint8_t          myWiFiAPIndex;
@@ -23,7 +24,7 @@ uint32_t    lastBackupDigiTime  = millis();
 namespace WIFI_Utils {
 
     void checkWiFi() {
-        if (!Config.digi.ecoMode) {
+        if (Config.digi.ecoMode == 0) {
             if (backUpDigiMode) {
                 uint32_t WiFiCheck = millis() - lastBackupDigiTime;
                 if (WiFi.status() != WL_CONNECTED && WiFiCheck >= 15 * 60 * 1000) {
@@ -153,7 +154,7 @@ namespace WIFI_Utils {
     }
 
     void setup() {
-        if (!Config.digi.ecoMode) startWiFi();
+        if (Config.digi.ecoMode == 0) startWiFi();
         btStop();
     }
 

src/wx_utils.cpp

@@ -1,4 +1,6 @@
+#include <TinyGPS++.h>
 #include "configuration.h"
+#include "board_pinout.h"
 #include "wx_utils.h"
 #include "display.h"
 
@@ -8,6 +10,9 @@
 
 extern Configuration            Config;
 extern String                   fifthLine;
+#ifdef HAS_GPS
+extern TinyGPSPlus              gps;
+#endif
 
 int         wxModuleType        = 0;
 uint8_t     wxModuleAddress     = 0x00;
@@ -16,7 +21,7 @@ float newHum, newTemp, newPress, newGas;
 
 
 Adafruit_BME280     bme280;
-#ifdef HELTEC_V3
+#if defined(HELTEC_V3) || defined(HELTEC_V3_2)
 Adafruit_BMP280     bmp280(&Wire1);
 Adafruit_Si7021     sensor = Adafruit_Si7021();
 #else
@@ -26,13 +31,12 @@ Adafruit_Si7021     sensor = Adafruit_Si7021();
 #endif
 
 
-
 namespace WX_Utils {
 
     void getWxModuleAddres() {
         uint8_t err, addr;
         for(addr = 1; addr < 0x7F; addr++) {
-            #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+            #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
                 Wire1.beginTransmission(addr);
                 err = Wire1.endTransmission();
             #else
@@ -58,7 +62,7 @@ namespace WX_Utils {
             if (wxModuleAddress != 0x00) {
                 bool wxModuleFound = false;
                 if (wxModuleAddress == 0x76 || wxModuleAddress == 0x77) {
-                    #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+                    #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
                         if (bme280.begin(wxModuleAddress, &Wire1)) {
                             Serial.println("BME280 sensor found");
                             wxModuleType = 1;
@@ -115,7 +119,7 @@ namespace WX_Utils {
                             Serial.println("BMP280 Module init done!");
                             break;
                         case 3:
-                            #ifndef HELTEC_V3
+                            #if !defined(HELTEC_V3) && !defined(HELTEC_V3_2)
                                 bme680.setTemperatureOversampling(BME680_OS_1X);
                                 bme680.setHumidityOversampling(BME680_OS_1X);
                                 bme680.setPressureOversampling(BME680_OS_1X);
@@ -195,7 +199,7 @@ namespace WX_Utils {
                 newHum      = 0;
                 break;
             case 3: // BME680
-                #ifndef HELTEC_V3
+                #if !defined(HELTEC_V3) && !defined(HELTEC_V3_2)
                     bme680.performReading();
                     delay(50);
                     if (bme680.endReading()) {
@@ -227,13 +231,14 @@ namespace WX_Utils {
                 humStr  = "..";
             }
             
-            String presStr;
-            if (wxModuleAddress == 4) {
-                presStr = ".....";
-            } else {
-                presStr = generatePresString(newPress + (Config.wxsensor.heightCorrection/CORRECTION_FACTOR));
-            }
-            
+            String presStr = (wxModuleAddress == 4) 
+                ? "....." 
+            #ifdef HAS_GPS
+                : generatePresString(newPress + (gps.altitude.meters() / CORRECTION_FACTOR));
+            #else
+                : generatePresString(newPress + (Config.wxsensor.heightCorrection / CORRECTION_FACTOR));
+            #endif
+                       
             fifthLine = "BME-> ";
             fifthLine += String(int(newTemp + Config.wxsensor.temperatureCorrection));
             fifthLine += "C ";

test/README

@@ -1,11 +0,0 @@
-
-This directory is intended for PlatformIO Test Runner and project tests.
-
-Unit Testing is a software testing method by which individual units of
-source code, sets of one or more MCU program modules together with associated
-control data, usage procedures, and operating procedures, are tested to
-determine whether they are fit for use. Unit testing finds problems early
-in the development cycle.
-
-More information about PlatformIO Unit Testing:
-- https://docs.platformio.org/en/latest/advanced/unit-testing/index.html

variants/ESP32_C3_OctopusLab_LoRa/board_pinout.h

@@ -11,6 +11,8 @@
     #define RADIO_DIO1_PIN          3
     #define RADIO_RST_PIN           -1
     #define RADIO_BUSY_PIN          8
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         RADIO_DIO1_PIN
 
     //  Display
     #define HAS_DISPLAY

variants/ESP32_DIY_1W_LoRa/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          14
     #define RADIO_RXEN              32
     #define RADIO_TXEN              25
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
     //  Display
     #define HAS_DISPLAY

variants/ESP32_DIY_1W_LoRa_915/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          14
     #define RADIO_RXEN              32
     #define RADIO_TXEN              25
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
     //  Display
     #define HAS_DISPLAY    

variants/ESP32_DIY_1W_LoRa_LLCC68/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          14
     #define RADIO_RXEN              32
     #define RADIO_TXEN              25
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
     //  Display
     #define HAS_DISPLAY

variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          32
     #define RADIO_RXEN              14
     #define RADIO_TXEN              13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
     //  Display
     #define HAS_DISPLAY

variants/ESP32_DIY_LoRa/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ESP32_DIY_LoRa_915/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/OE5HWN_MeshCom/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          26
     #define RADIO_RXEN              14
     #define RADIO_TXEN              13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
     //  Display
     #define HAS_DISPLAY

variants/QRPLabs_LightGateway_1_0/board_pinout.h

@@ -13,6 +13,8 @@
     #define RADIO_BUSY_PIN          6
     #define RADIO_RXEN              42
     #define RADIO_TXEN              14
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_5
 
     //  Display
     #define HAS_DISPLAY

variants/TROY_LoRa_APRS/board_pinout.h

@@ -0,0 +1,35 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN      5
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      27
+    #define RADIO_CS_PIN        18
+    #define RADIO_RST_PIN       23
+    #define RADIO_BUSY_PIN      26
+    #define RADIO_WAKEUP_PIN    RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN     GPIO_SEL_26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA            21
+    #define OLED_SCL            22
+    #define OLED_RST            -1
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX              12
+    #define GPS_TX              34
+
+    //  OTHER
+    #define INTERNAL_LED_PIN    2
+    #define BATTERY_PIN         35
+
+#endif

variants/TROY_LoRa_APRS/platformio.ini

@@ -0,0 +1,8 @@
+[env:TROY_LoRa_APRS]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D TROY_LoRa_APRS
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}

variants/WEMOS-D1-R32-RA02/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           13
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          12
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
     //  Display
     #define HAS_DISPLAY

variants/WEMOS-LOLIN32-OLED-DIY/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            14
     #define RADIO_RST_PIN           2
     #define RADIO_BUSY_PIN          25
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_25
 
     //  Display    
     #define HAS_DISPLAY

variants/WEMOS_S2_MINI_DIY_LoRa/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            34
     #define RADIO_RST_PIN           33
     #define RADIO_BUSY_PIN          38
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_38
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        15

variants/XIAO_ESP32S3_WIO_SX1262/board_pinout.h

@@ -0,0 +1,22 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN      7
+    #define RADIO_MISO_PIN      8
+    #define RADIO_MOSI_PIN      9
+    #define RADIO_CS_PIN        41
+    #define RADIO_RST_PIN       42
+    #define RADIO_DIO1_PIN      39
+    #define RADIO_BUSY_PIN      40
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_39
+
+    #define RADIO_HAS_RF_SWITCH //  DIO02
+    #define RADIO_RF_SWITCH     38
+
+    #define BUTTON_PIN          21
+    #define INTERNAL_LED_PIN    48
+    
+#endif

variants/XIAO_ESP32S3_WIO_SX1262/platformio.ini

@@ -0,0 +1,8 @@
+[env:XIAO_ESP32S3_WIO_SX1262]
+board = seeed_xiao_esp32s3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D XIAO_ESP32S3_LORA
+lib_deps =
+	${common.lib_deps}

variants/esp32c3_DIY_1W_LoRa/board_pinout.h

@@ -13,5 +13,7 @@
     #define RADIO_BUSY_PIN          3
     #define RADIO_RXEN              6
     #define RADIO_TXEN              7
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         RADIO_DIO1_PIN
 
 #endif

variants/esp32c3_DIY_1W_LoRa_915/board_pinout.h

@@ -13,5 +13,7 @@
     #define RADIO_BUSY_PIN          3
     #define RADIO_RXEN              6
     #define RADIO_TXEN              7
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         RADIO_DIO1_PIN
 
 #endif

variants/heltec-lora32-v2/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY
@@ -20,6 +22,7 @@
     #define OLED_SDA                4
     #define OLED_SCL                15
     #define OLED_RST                16
+    #define OLED_DISPLAY_HAS_RST_PIN
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        25

variants/heltec_ht-ct62/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           5
     #define RADIO_DIO1_PIN          3
     #define RADIO_BUSY_PIN          4
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         RADIO_DIO1_PIN
 
     //  Aditional Config
     #define BATTERY_PIN             1

variants/heltec_wifi_lora_32_V3/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  Display
     #define HAS_DISPLAY
@@ -21,6 +23,7 @@
     #define OLED_SDA                17
     #define OLED_SCL                18
     #define OLED_RST                21
+    #define OLED_DISPLAY_HAS_RST_PIN
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        35

variants/heltec_wifi_lora_32_V3_2/board_pinout.h

@@ -0,0 +1,36 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                17
+    #define OLED_SCL                18
+    #define OLED_RST                21
+    #define OLED_DISPLAY_HAS_RST_PIN
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        35
+    #define BATTERY_PIN             1
+    #define VEXT_CTRL               36
+    #define ADC_CTRL                37
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
+#endif

variants/heltec_wifi_lora_32_V3_2/platformio.ini

@@ -0,0 +1,9 @@
+[env:heltec_wifi_lora_32_V3_2]
+board = heltec_wifi_lora_32_V3
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_V3_2
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}

variants/heltec_wireless_paper/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  Display
     #define HAS_DISPLAY

variants/heltec_wireless_paper/platformio.ini

@@ -4,5 +4,7 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	-D HELTEC_WP
+	-D WIRELESS_PAPER
 lib_deps =
-	${common.lib_deps}
+	${common.lib_deps}
+	todd-herbert/heltec-eink-modules@^4.4.0

variants/heltec_wireless_stick/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  Display
     #define HAS_DISPLAY
@@ -18,9 +20,10 @@
     #undef  OLED_SCL
     #undef  OLED_RST
 
-    #define OLED_SDA                4
-    #define OLED_SCL                15
-    #define OLED_RST                16
+    #define OLED_SDA                17
+    #define OLED_SCL                18
+    #define OLED_RST                21
+    #define OLED_DISPLAY_HAS_RST_PIN
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        35

variants/heltec_wireless_stick_lite_v3/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        35

variants/heltec_wireless_stick_lite_v3_display/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12
     #define RADIO_DIO1_PIN          14
     #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  Display
     #define HAS_DISPLAY

variants/heltec_wireless_tracker/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           12      // SX1262 RST
     #define RADIO_DIO1_PIN          14      // SX1262 DIO1
     #define RADIO_BUSY_PIN          13      // SX1262 BUSY
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_14
     
     //  Display
     #define HAS_DISPLAY

variants/ttgo-lora32-v21/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-lora32-v21_915/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1_2/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26    
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1_2_915/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1_2_SX1262/board_pinout.h

@@ -11,6 +11,8 @@
     #define RADIO_RST_PIN           23
     #define RADIO_DIO1_PIN          33
     #define RADIO_BUSY_PIN          32
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1_915/board_pinout.h

@@ -9,6 +9,8 @@
     #define RADIO_CS_PIN            18
     #define RADIO_RST_PIN           14
     #define RADIO_BUSY_PIN          26
+    #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo-t-beam-v1_SX1268/board_pinout.h

@@ -11,6 +11,8 @@
     #define RADIO_RST_PIN           23
     #define RADIO_DIO1_PIN          33
     #define RADIO_BUSY_PIN          32
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
     //  Display
     #define HAS_DISPLAY    

variants/ttgo_lora32_t3s3_v1_2/board_pinout.h

@@ -10,6 +10,8 @@
     #define RADIO_RST_PIN           8
     #define RADIO_DIO1_PIN          33
     #define RADIO_BUSY_PIN          34
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
     //  Display
     #define HAS_DISPLAY

variants/ttgo_t_beam_s3_SUPREME_v3/board_pinout.h

@@ -0,0 +1,39 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          12
+    #define RADIO_MISO_PIN          13
+    #define RADIO_MOSI_PIN          11
+    #define RADIO_CS_PIN            10
+    #define RADIO_DIO0_PIN          -1
+    #define RADIO_RST_PIN           5
+    #define RADIO_DIO1_PIN          1
+    #define RADIO_BUSY_PIN          4
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_1
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                17
+    #define OLED_SCL                18
+    #define OLED_RST                16
+    #define OLED_DISPLAY_HAS_RST_PIN
+
+    //  Aditional Config
+    #define HAS_AXP2101
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  8
+    #define GPS_TX                  9
+
+    #define BOARD_HAS_PSRAM
+
+#endif

variants/ttgo_t_beam_s3_SUPREME_v3/platformio.ini

@@ -0,0 +1,12 @@
+[env:ttgo_t_beam_s3_SUPREME_v3]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+    -D TTGO_T_Beam_S3_SUPREME_V3
+lib_deps =
+  	${common.lib_deps}
+	${common.display_libs}
+  	lewisxhe/XPowersLib @ 0.2.4
+	adafruit/Adafruit SH110X @ 2.1.10

variants/ttgo_t_deck_GPS/board_pinout.h

@@ -0,0 +1,38 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          40
+    #define RADIO_MISO_PIN          38
+    #define RADIO_MOSI_PIN          41
+    #define RADIO_CS_PIN            9
+    #define RADIO_RST_PIN           17
+    #define RADIO_DIO1_PIN          45
+    #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_45
+
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_TFT
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST 
+
+    //  GPS
+    #define GPS_RX                  43
+    #define GPS_TX                  44
+
+    //  Aditional Config
+    #define BATTERY_PIN             4
+
+    #define BOARD_POWERON           10
+    #define BOARD_SDCARD_CS         39
+    #define BOARD_BL_PIN            42
+
+    #define BOARD_I2C_SDA           18
+    #define BOARD_I2C_SCL           8
+
+#endif

variants/ttgo_t_deck_GPS/platformio.ini

@@ -0,0 +1,50 @@
+[env:ttgo_t_deck_GPS]
+framework = arduino
+monitor_speed = 115200
+platform = espressif32 @ 6.3.1
+board_build.partitions = min_spiffs.csv
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+board_build.embed_files = 
+	data_embed/index.html.gz
+	data_embed/style.css.gz
+	data_embed/script.js.gz
+	data_embed/bootstrap.css.gz
+	data_embed/bootstrap.js.gz
+	data_embed/favicon.png.gz
+extra_scripts =
+	pre:tools/compress.py
+debug_tool = esp-prog
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D TTGO_T_DECK_GPS
+	-D BOARD_HAS_PSRAM
+    -D USER_SETUP_LOADED
+    -D ST7789_DRIVER
+	-D TFT_WIDTH=240
+	-D TFT_HEIGHT=320
+    -D TFT_RGB_ORDER=TFT_BGR
+    -D TFT_INVERSION_ON
+    -D TFT_MISO=38
+    -D TFT_MOSI=41
+    -D TFT_SCLK=40
+    -D TFT_CS=12
+    -D TFT_DC=11
+    -D TFT_RST=-1
+	-D TFT_BUSY=-1
+	-D TFT_BL=42
+	-D TFT_BACKLIGHT_ON=1
+    -D TOUCH_CS=-1
+    -D LOAD_GLCD
+    -D LOAD_FONT2
+    -D LOAD_FONT4
+    -D LOAD_FONT6
+    -D LOAD_FONT7
+    -D LOAD_FONT8
+    -D SPI_FREQUENCY=40000000
+    -D SPI_READ_FREQUENCY=16000000
+lib_deps =
+	${common.lib_deps}
+	bodmer/TFT_eSPI @ 2.5.43
+    https://github.com/mmMicky/TouchLib.git

variants/ttgo_t_deck_plus/board_pinout.h

@@ -0,0 +1,39 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          40
+    #define RADIO_MISO_PIN          38
+    #define RADIO_MOSI_PIN          41
+    #define RADIO_CS_PIN            9
+    #define RADIO_RST_PIN           17
+    #define RADIO_DIO1_PIN          45
+    #define RADIO_BUSY_PIN          13
+    #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
+    #define GPIO_WAKEUP_PIN         GPIO_SEL_45
+
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_TFT
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST 
+
+    //  GPS
+    #define GPS_RX                  43
+    #define GPS_TX                  44
+    #define GPS_BAUDRATE            38400
+
+    //  Aditional Config
+    #define BATTERY_PIN             4
+
+    #define BOARD_POWERON           10
+    #define BOARD_SDCARD_CS         39
+    #define BOARD_BL_PIN            42
+
+    #define BOARD_I2C_SDA           18
+    #define BOARD_I2C_SCL           8
+
+#endif

variants/ttgo_t_deck_plus/platformio.ini

@@ -0,0 +1,50 @@
+[env:ttgo_t_deck_plus]
+framework = arduino
+monitor_speed = 115200
+platform = espressif32 @ 6.3.1
+board_build.partitions = min_spiffs.csv
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+board_build.embed_files = 
+	data_embed/index.html.gz
+	data_embed/style.css.gz
+	data_embed/script.js.gz
+	data_embed/bootstrap.css.gz
+	data_embed/bootstrap.js.gz
+	data_embed/favicon.png.gz
+extra_scripts =
+	pre:tools/compress.py
+debug_tool = esp-prog
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D TTGO_T_DECK_PLUS
+	-D BOARD_HAS_PSRAM
+    -D USER_SETUP_LOADED
+    -D ST7789_DRIVER
+	-D TFT_WIDTH=240
+	-D TFT_HEIGHT=320
+    -D TFT_RGB_ORDER=TFT_BGR
+    -D TFT_INVERSION_ON
+    -D TFT_MISO=38
+    -D TFT_MOSI=41
+    -D TFT_SCLK=40
+    -D TFT_CS=12
+    -D TFT_DC=11
+    -D TFT_RST=-1
+	-D TFT_BUSY=-1
+	-D TFT_BL=42
+	-D TFT_BACKLIGHT_ON=1
+    -D TOUCH_CS=-1
+    -D LOAD_GLCD
+    -D LOAD_FONT2
+    -D LOAD_FONT4
+    -D LOAD_FONT6
+    -D LOAD_FONT7
+    -D LOAD_FONT8
+    -D SPI_FREQUENCY=40000000
+    -D SPI_READ_FREQUENCY=16000000
+lib_deps =
+	${common.lib_deps}
+	bodmer/TFT_eSPI @ 2.5.43
+    https://github.com/mmMicky/TouchLib.git