readme update for T3S3

add Lilygo T3S3
added but reboots
2026-03-28 16:52:33 +01:00 · 2024-10-29 10:13:23 -03:00 · 2024-10-29 09:57:26 -03:00 · 2024-10-28 09:33:27 -03:00 · 2024-10-25 15:56:03 -03:00 · 2024-10-25 15:22:24 -03:00
21 changed files with 383 additions and 316 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -15,6 +15,8 @@ jobs:
                      chip: esp32
                    - name: ttgo-lora32-v21_915
                      chip: esp32
+                    - name: ttgo_lora32_t3s3_v1_2
+                      chip: esp32s3
                    - name: heltec-lora32-v2
                      chip: esp32
                    - name: heltec_wifi_lora_32_V3
@@ -73,6 +75,8 @@ jobs:
                      chip: esp32c3
                    - name: ESP32_C3_OctopusLab_LoRa
                      chip: esp32c3
+                    - name: QRPLabs_LightGateway_1_0
+                      chip: esp32s3
        steps:
            - uses: actions/checkout@v3

--- a/README.md
+++ b/README.md
@@ -32,11 +32,13 @@ ____________________________________________________

 (NOTE: all boards with 433-868-915 MHz versions)

- TTGO Lilygo LoRa32 v2.1 / v1.6 (they work the same).
+- TTGO Lilygo LoRa32 T3S3 V1.2 and LoRa32 V2.1 (V1.6 is the same).

- TTGO T-Beam v1.0 , v1.1, v1.2 (also variations with SX1262 and SX1268 LoRa Modules).
+- TTGO T-Beam V1.0 , V1.1, V1.2 (also variations with SX1262 and SX1268 LoRa Modules).

- HELTEC V2, V3 , Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker.
+- HELTEC V2, V3 , Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker, Wireless Paper.
+
+- QRP Labs LightGateway 1.0.

 - ESP32 Wroom + SX1278 LoRa Module or Ebyte 400M30S (or 900M30S) 1W LoRa Module for a DIY Versions.

@@ -50,6 +52,8 @@ ____________________________________________________

 ## Timeline (Versions):

+- 2024.10.29 Added LILYGO Lora32 T3S3 support.
+- 2024.10.25 Added QRP Labs LightGateway 1.0 support.
 - 2024.10.21 Boards with GPS can now send Real-GPS Beacon (also posible: GPS ambiguity of ~ 1 km).
 - 2024.10.14 Received Packets in WebUI show real Local Time (NTP with GMT offset).
 - 2024.10.08 New EcoMode for Remote Digirepeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP and all was 150mA). APRS Message/Queries can start/stop this mode too.
--- a/data_embed/index.html
+++ b/data_embed/index.html
@@ -492,7 +492,7 @@
                                            <label
                                                for="beacon.sendViaAPRSIS"
                                                class="form-label"
-                                                >Send our beacon to
+                                                >Send beacon to
                                                APRS-IS
                                            </label>
                                        </div>
--- a/images/Web001-Station.png
+++ b/images/Web001-Station.png
--- a/images/Web004-Beaconing.png
+++ b/images/Web004-Beaconing.png
--- a/images/Web005-Digirepeating.png
+++ b/images/Web005-Digirepeating.png
--- a/images/Web009-Telemetry.png
+++ b/images/Web009-Telemetry.png
--- a/images/Web013-AutoAP.png
+++ b/images/Web013-AutoAP.png
--- a/images/Web015-Admin.png
+++ b/images/Web015-Admin.png
--- a/images/Web016-NTP.png
+++ b/images/Web016-NTP.png
--- a/images/Web017-Experimental.png
+++ b/images/Web017-Experimental.png
--- a/images/WebFlasherGithub.png
+++ b/images/WebFlasherGithub.png
--- a/images/WebFlasheriGateGithub.png
+++ b/images/WebFlasheriGateGithub.png
--- a/platformio.ini
+++ b/platformio.ini
@@ -28,6 +28,29 @@ extra_scripts =
 debug_tool = esp-prog

 [common]
+build_flags =
+	-Werror -Wall
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+	-DRADIOLIB_EXCLUDE_CC1101=1
+	-DRADIOLIB_EXCLUDE_NRF24=1
+	-DRADIOLIB_EXCLUDE_RF69=1
+	-DRADIOLIB_EXCLUDE_SX1231=1
+	-DRADIOLIB_EXCLUDE_SX1233=1
+	-DRADIOLIB_EXCLUDE_SI443X=1
+	-DRADIOLIB_EXCLUDE_RFM2X=1
+	-DRADIOLIB_EXCLUDE_AFSK=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+	-DRADIOLIB_EXCLUDE_MORSE=1
+	-DRADIOLIB_EXCLUDE_RTTY=1
+	-DRADIOLIB_EXCLUDE_SSTV=1
+	-DRADIOLIB_EXCLUDE_AX25=1
+	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_PAGER=1
+	-DRADIOLIB_EXCLUDE_FSK4=1
+	-DRADIOLIB_EXCLUDE_APRS=1
+	-DRADIOLIB_EXCLUDE_LORAWAN=1
 lib_deps = 
 	jgromes/RadioLib @ 6.6.0
 	mikalhart/TinyGPSPlus @ 1.0.3
@@ -41,287 +64,251 @@ lib_deps =
 	mathieucarbou/ESPAsyncWebServer @ 3.2.3
 	mathieucarbou/AsyncTCP @ 3.2.5
 	arduino-libraries/NTPClient @ 3.2.1
+display_libs =
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+

 [env:ttgo-lora32-v21]
 board = ttgo-lora32-v21
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_LORA32_V2_1
+build_flags =
+	${common.build_flags}
+	-DTTGO_LORA32_V2_1
 	-DHAS_SX1278
-	-DHAS_ADC_CALIBRATION
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+	-DHAS_ADC_CALIBRATION	
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ttgo-lora32-v21_915]
 board = ttgo-lora32-v21
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_LORA32_V2_1_915
+build_flags =
+	${common.build_flags}
+	-DTTGO_LORA32_V2_1_915
 	-DHAS_SX1276
 	-DHAS_ADC_CALIBRATION
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:heltec-lora32-v2]
 board = ttgo-lora32-v21
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_V2
 	-DHAS_SX1278
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:heltec_wifi_lora_32_V3]
 board = heltec_wifi_lora_32_V3
 board_build.mcu = esp32s3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_V3
 	-DHAS_SX1262
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:heltec_wireless_stick]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_WS
 	-DHAS_SX1262
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:heltec_wireless_stick_lite_v3]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_WSL_V3
 	-DHAS_SX1262
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}

 [env:heltec_wireless_stick_lite_v3_display]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_WSL_V3_DISPLAY
 	-DHAS_SX1262
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}

 [env:ESP32_DIY_LoRa]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_LoRa
 	-DHAS_SX1278
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_DIY_LoRa_915]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_LoRa_915
 	-DHAS_SX1276
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_DIY_1W_LoRa]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_1W_LoRa
 	-DHAS_SX1268
 	-DHAS_1W_LORA
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_DIY_1W_LoRa_915]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_1W_LoRa_915
 	-DHAS_SX1262
 	-DHAS_1W_LORA
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_DIY_1W_LoRa_LLCC68]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_1W_LoRa_LLCC68
 	-DHAS_LLCC68
 	-DHAS_1W_LORA
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
- 	adafruit/Adafruit GFX Library @ 1.11.9
- 	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_DIY_1W_LoRa_Mesh_V1_2]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_1W_LoRa_Mesh_V1_2
 	-DHAS_SX1268
 	-DHAS_1W_LORA
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}


 [env:ttgo-t-beam-v1_2]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_2
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_2
 	-DHAS_SX1278
 	-DHAS_AXP2101
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ttgo-t-beam-v1_2_915]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_2_915
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_2_915
 	-DHAS_SX1276
 	-DHAS_AXP2101
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ttgo-t-beam-v1]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_0
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_0
 	-DHAS_SX1278
 	-DHAS_AXP192
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ttgo-t-beam-v1_915]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_0_915
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_0_915
 	-DHAS_SX1276
 	-DHAS_AXP192
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ttgo-t-beam-v1_SX1268]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_0_SX1268
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_0_SX1268
 	-DHAS_SX1268
 	-DHAS_AXP192
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ttgo-t-beam-v1_2_SX1262]
 board = ttgo-t-beam
-build_flags = 
-	-Werror -Wall
-	-DTTGO_T_Beam_V1_2_SX1262
+build_flags =
+	${common.build_flags}
+	-DTTGO_T_BEAM_V1_2_SX1262
 	-DHAS_SX1262
 	-DHAS_AXP2101
 	-DHAS_GPS
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	lewisxhe/XPowersLib @ 0.2.4

 [env:ESP32_DIY_LoRa_A7670]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_LoRa_A7670
 	-DHAS_SX1278
 	-DHAS_A7670
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	vshymanskyy/TinyGSM @ 0.12.0
 	vshymanskyy/StreamDebugger @ 1.0.1

 [env:ESP32_DIY_LoRa_A7670_915]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DESP32_DIY_LoRa_A7670_915
 	-DHAS_SX1276
 	-DHAS_A7670
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
 	vshymanskyy/TinyGSM @ 0.12.0
 	vshymanskyy/StreamDebugger @ 1.0.1

@@ -329,8 +316,8 @@ lib_deps =
 [env:heltec_wireless_tracker]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_WIRELESS_TRACKER
 	-DHAS_SX1262
 	-DHAS_GPS
@@ -360,130 +347,139 @@ build_flags =
 	-D USE_HSPI_PORT
 	-DARDUINO_USB_MODE=1
 	-DARDUINO_USB_CDC_ON_BOOT=1
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43

 [env:heltec_ht-ct62]
 board = heltec_wireless_stick_lite
 board_build.mcu = esp32c3
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DHELTEC_HTCT62
 	-DHAS_SX1262
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:heltec_wireless_paper]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
-	-Werror -Wall
+	${common.build_flags}
 	-DHELTEC_WP
 	-DHAS_SX1262
 	-DHAS_EPAPER
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps =
 	${common.lib_deps}


 [env:OE5HWN_MeshCom]
 board = esp32dev
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DOE5HWN_MeshCom
 	-DHAS_SX1268
 	-DHAS_1W_LORA
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:WEMOS-LOLIN32-OLED-DIY]
 board = lolin32
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DWEMOS_LOLIN32_OLED_DIY_LoRa
 	-DHAS_SX1278
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:WEMOS-D1-R32-RA02]
 board = wemos_d1_uno32
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DWEMOS_D1_R32_RA02
 	-DHAS_SX1278
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:WEMOS_S2_MINI_DIY_LoRa]
 board = lolin_s2_mini
-build_flags = 
-	-Werror -Wall
+build_flags =
+	${common.build_flags}
 	-DWEMOS_S2_MINI_DIY_LoRa
 	-DHAS_SX1278
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-lib_deps = 
+lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:esp32c3_DIY_1W_LoRa]
 board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
 build_flags =
-	-Werror -Wall
+	${common.build_flags}
 	-DESP32C3_DIY_1W_LoRa
 	-DHAS_SX1268
 	-DHAS_1W_LORA
 	-DARDUINO_USB_MODE=1
 	-DARDUINO_USB_CDC_ON_BOOT=1
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:esp32c3_DIY_1W_LoRa_915]
 board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
 build_flags =
-	-Werror -Wall
+	${common.build_flags}
 	-DESP32C3_DIY_1W_LoRa_915
 	-DHAS_SX1262
 	-DHAS_1W_LORA
 	-DARDUINO_USB_MODE=1
 	-DARDUINO_USB_CDC_ON_BOOT=1
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}

 [env:ESP32_C3_OctopusLab_LoRa]
 board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
 build_flags =
-	-Werror -Wall
+	${common.build_flags}
 	-DESP32_C3_OctopusLab_LoRa
 	-DHAS_SX1268
 	-DRADIO_HAS_XTAL
 	-DARDUINO_USB_MODE=1
 	-DARDUINO_USB_CDC_ON_BOOT=1
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps =
 	${common.lib_deps}
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
+	${common.display_libs}
+
+[env:QRPLabs_LightGateway_1_0]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-DLIGHTGATEWAY_1_0
+	-DHAS_SX1268
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+
+[env:ttgo_lora32_t3s3_v1_2]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+board_upload.flash_size = 4MB
+build_flags =
+    ${common.build_flags}
+    -DTTGO_LORA32_T3S3_V1_2
+    -DHAS_SX1262
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/src/LoRa_APRS_iGate.cpp
+++ b/src/LoRa_APRS_iGate.cpp
@@ -40,7 +40,7 @@ ________________________________________________________________________________
    #include "A7670_utils.h"
 #endif

-String              versionDate             = "2024.10.21";
+String              versionDate             = "2024.10.29";
 Configuration       Config;
 WiFiClient          espClient;
 #ifdef HAS_GPS
--- a/src/battery_utils.cpp
+++ b/src/battery_utils.cpp
@@ -23,7 +23,7 @@ int     telemetryCounter                = random(1,999);
 #ifdef HAS_ADC_CALIBRATION
    #include <esp_adc_cal.h>

-    #if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
+    #if defined(TTGO_LORA32_V2_1) || defined(TTGO_LORA32_V2_1_915)
        #define InternalBattery_ADC_Channel ADC1_CHANNEL_7  // t_lora32 pin35
        #define ExternalVoltage_ADC_Channel ADC1_CHANNEL_6  // t_lora32 pin34
    #endif
--- a/src/boards_pinout.h
+++ b/src/boards_pinout.h
@@ -9,67 +9,67 @@


 // LORA MODULES
-#if defined(TTGO_T_LORA32_V2_1) || defined(HELTEC_V2) || defined(ESP32_DIY_LoRa) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0_915)
-    #define RADIO_SCLK_PIN  5       // GPIO5    - SX1278 SCK
-    #define RADIO_MISO_PIN  19      // GPIO19   - SX1278 MISO
-    #define RADIO_MOSI_PIN  27      // GPIO27   - SX1278 MOSI
-    #define RADIO_CS_PIN    18      // GPIO18   - SX1278 CS ---> NSS
-    #define RADIO_RST_PIN   14      // GPIO14   - SX1278 RST
-    #define RADIO_BUSY_PIN  26      // GPIO26   - SX1278 IRQ ---->DIO0
+#if defined(TTGO_LORA32_V2_1) || defined(HELTEC_V2) || defined(ESP32_DIY_LoRa) || defined(TTGO_T_BEAM_V1_2) || defined(TTGO_T_BEAM_V1_0) || defined(TTGO_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_BEAM_V1_2_915) || defined(TTGO_T_BEAM_V1_0_915)
+    #define RADIO_SCLK_PIN      5       // GPIO5    - SX1278 SCK
+    #define RADIO_MISO_PIN      19      // GPIO19   - SX1278 MISO
+    #define RADIO_MOSI_PIN      27      // GPIO27   - SX1278 MOSI
+    #define RADIO_CS_PIN        18      // GPIO18   - SX1278 CS ---> NSS
+    #define RADIO_RST_PIN       14      // GPIO14   - SX1278 RST
+    #define RADIO_BUSY_PIN      26      // GPIO26   - SX1278 IRQ ---->DIO0
 #endif

 #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS) || defined(HELTEC_WP)
-    #define RADIO_SCLK_PIN  9       // SX1262 SCK
-    #define RADIO_MISO_PIN  11      // SX1262 MISO
-    #define RADIO_MOSI_PIN  10      // SX1262 MOSI
-    #define RADIO_CS_PIN    8       // SX1262 NSS
-    #define RADIO_RST_PIN   12      // SX1262 RST
-    #define RADIO_DIO1_PIN  14      // SX1262 DIO1
-    #define RADIO_BUSY_PIN  13      // SX1262 BUSY
+    #define RADIO_SCLK_PIN      9       // SX1262 SCK
+    #define RADIO_MISO_PIN      11      // SX1262 MISO
+    #define RADIO_MOSI_PIN      10      // SX1262 MOSI
+    #define RADIO_CS_PIN        8       // SX1262 NSS
+    #define RADIO_RST_PIN       12      // SX1262 RST
+    #define RADIO_DIO1_PIN      14      // SX1262 DIO1
+    #define RADIO_BUSY_PIN      13      // SX1262 BUSY
 #endif

 #if defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68)   // Ebyte E22 400M30S (SX1268) or E22 900M30S (SX1262) or E220 LLCC68
-    #define RADIO_SCLK_PIN  18
-    #define RADIO_MISO_PIN  19
-    #define RADIO_MOSI_PIN  23
-    #define RADIO_CS_PIN    5
-    #define RADIO_RST_PIN   27
-    #define RADIO_DIO1_PIN  12
-    #define RADIO_BUSY_PIN  14
-    #define RADIO_RXEN      32
-    #define RADIO_TXEN      25
+    #define RADIO_SCLK_PIN      18
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      23
+    #define RADIO_CS_PIN        5
+    #define RADIO_RST_PIN       27
+    #define RADIO_DIO1_PIN      12
+    #define RADIO_BUSY_PIN      14
+    #define RADIO_RXEN          32
+    #define RADIO_TXEN          25
 #endif

 #if defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)  // https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.02-2LCD-FreePins
-    #define RADIO_SCLK_PIN  5
-    #define RADIO_MISO_PIN  19
-    #define RADIO_MOSI_PIN  27
-    #define RADIO_CS_PIN    18
-    #define RADIO_RST_PIN   23
-    #define RADIO_DIO1_PIN  33
-    #define RADIO_BUSY_PIN  32
-    #define RADIO_RXEN      14
-    #define RADIO_TXEN      13
+    #define RADIO_SCLK_PIN      5
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      27
+    #define RADIO_CS_PIN        18
+    #define RADIO_RST_PIN       23
+    #define RADIO_DIO1_PIN      33
+    #define RADIO_BUSY_PIN      32
+    #define RADIO_RXEN          14
+    #define RADIO_TXEN          13
 #endif

 #ifdef WEMOS_LOLIN32_OLED_DIY_LoRa
-    #define RADIO_SCLK_PIN  15
-    #define RADIO_MISO_PIN  13
-    #define RADIO_MOSI_PIN  12
-    #define RADIO_CS_PIN    14
-    #define RADIO_RST_PIN   2
-    #define RADIO_BUSY_PIN  25
+    #define RADIO_SCLK_PIN      15
+    #define RADIO_MISO_PIN      13
+    #define RADIO_MOSI_PIN      12
+    #define RADIO_CS_PIN        14
+    #define RADIO_RST_PIN       2
+    #define RADIO_BUSY_PIN      25
 #endif

-#if defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262)
-    #define RADIO_SCLK_PIN  5
-    #define RADIO_MISO_PIN  19
-    #define RADIO_MOSI_PIN  27
-    #define RADIO_CS_PIN    18
-    #define RADIO_DIO0_PIN  26
-    #define RADIO_RST_PIN   23
-    #define RADIO_DIO1_PIN  33
-    #define RADIO_BUSY_PIN  32
+#if defined(TTGO_T_BEAM_V1_0_SX1268) || defined(TTGO_T_BEAM_V1_2_SX1262)
+    #define RADIO_SCLK_PIN      5
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      27
+    #define RADIO_CS_PIN        18
+    #define RADIO_DIO0_PIN      26
+    #define RADIO_RST_PIN       23
+    #define RADIO_DIO1_PIN      33
+    #define RADIO_BUSY_PIN      32
 #endif

 #if defined(OE5HWN_MeshCom)
@@ -85,39 +85,39 @@
 #endif

 #if defined(HELTEC_HTCT62)
-    #define RADIO_SCLK_PIN  10   // SX1262 SCK
-    #define RADIO_MISO_PIN  6    // SX1262 MISO
-    #define RADIO_MOSI_PIN  7    // SX1262 MOSI
-    #define RADIO_CS_PIN    8    // SX1262 NSS
-    #define RADIO_RST_PIN   5    // SX1262 RST
-    #define RADIO_DIO1_PIN  3    // SX1262 DIO1
-    #define RADIO_BUSY_PIN  4    // SX1262 BUSY
+    #define RADIO_SCLK_PIN      10   // SX1262 SCK
+    #define RADIO_MISO_PIN      6    // SX1262 MISO
+    #define RADIO_MOSI_PIN      7    // SX1262 MOSI
+    #define RADIO_CS_PIN        8    // SX1262 NSS
+    #define RADIO_RST_PIN       5    // SX1262 RST
+    #define RADIO_DIO1_PIN      3    // SX1262 DIO1
+    #define RADIO_BUSY_PIN      4    // SX1262 BUSY
 #endif

 #if defined(ESP32_DIY_LoRa_A7670) || defined(ESP32_DIY_LoRa_A7670_915)
-    #define RADIO_SCLK_PIN  18
-    #define RADIO_MISO_PIN  19
-    #define RADIO_MOSI_PIN  23
-    #define RADIO_CS_PIN    2
-    #define RADIO_RST_PIN   0
-    #define RADIO_BUSY_PIN  32
-    #define A7670_PWR_PIN   4
-    #define A7670_ResetPin  5
-    #define A7670_TX_PIN    26
-    #define A7670_RX_PIN    27
+    #define RADIO_SCLK_PIN      18
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      23
+    #define RADIO_CS_PIN        2
+    #define RADIO_RST_PIN       0
+    #define RADIO_BUSY_PIN      32
+    #define A7670_PWR_PIN       4
+    #define A7670_ResetPin      5
+    #define A7670_TX_PIN        26
+    #define A7670_RX_PIN        27
 #endif

 #ifdef WEMOS_D1_R32_RA02
-    #define RADIO_SCLK_PIN  18
-    #define RADIO_MISO_PIN  19
-    #define RADIO_MOSI_PIN  23
-    #define RADIO_CS_PIN    5
-    #define RADIO_BUSY_PIN  12
-    #define RADIO_RST_PIN   13
-    #define RADIO_DIO1_PIN  14
-    #define OLED_SDA        21
-    #define OLED_SCL        22
-    #define OLED_RST        36
+    #define RADIO_SCLK_PIN      18
+    #define RADIO_MISO_PIN      19
+    #define RADIO_MOSI_PIN      23
+    #define RADIO_CS_PIN        5
+    #define RADIO_BUSY_PIN      12
+    #define RADIO_RST_PIN       13
+    #define RADIO_DIO1_PIN      14
+    #define OLED_SDA            21
+    #define OLED_SCL            22
+    #define OLED_RST            36
 #endif

 #if defined(ESP32C3_DIY_1W_LoRa) || defined(ESP32C3_DIY_1W_LoRa_915)
@@ -133,17 +133,30 @@
 #endif

 #ifdef WEMOS_S2_MINI_DIY_LoRa
-    #define RADIO_SCLK_PIN  36
-    #define RADIO_MISO_PIN  37
-    #define RADIO_MOSI_PIN  35
-    #define RADIO_CS_PIN    34
-    #define RADIO_BUSY_PIN  38
-    #define RADIO_RST_PIN   33
+    #define RADIO_SCLK_PIN      36
+    #define RADIO_MISO_PIN      37
+    #define RADIO_MOSI_PIN      35
+    #define RADIO_CS_PIN        34
+    #define RADIO_BUSY_PIN      38
+    #define RADIO_RST_PIN       33
+#endif
+
+#ifdef LIGHTGATEWAY_1_0
+    #define RADIO_VCC_PIN       21
+    #define RADIO_SCLK_PIN      12
+    #define RADIO_MISO_PIN      13
+    #define RADIO_MOSI_PIN      11
+    #define RADIO_CS_PIN        10
+    #define RADIO_RST_PIN       9
+    #define RADIO_DIO1_PIN      5
+    #define RADIO_BUSY_PIN      6
+    #define RADIO_RXEN          42
+    #define RADIO_TXEN          14
 #endif


 // OLED 
-#if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
+#if defined(TTGO_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_BEAM_V1_0) || defined(TTGO_T_BEAM_V1_2) || defined(TTGO_T_BEAM_V1_0_SX1268) || defined(TTGO_T_BEAM_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_BEAM_V1_0_915) || defined(TTGO_T_BEAM_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
    #define OLED_SDA    21
    #define OLED_SCL    22
    #define OLED_RST    -1      // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -167,10 +180,18 @@
    #define OLED_RST    -1
 #endif

+#ifdef LIGHTGATEWAY_1_0
+    #define OLED_SDA    3
+    #define OLED_SCL    4
+    #define OLED_RST    -1
+#endif
+
+
 #if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915) && !defined(WEMOS_S2_MINI_DIY_LoRa)
    #define HAS_DISPLAY
 #endif

+
 // Leds and other stuff
 #ifdef HELTEC_HTCT62
    #define BATTERY_PIN         1
@@ -178,7 +199,7 @@
 #ifdef WEMOS_S2_MINI_DIY_LoRa
    #define INTERNAL_LED_PIN    15
 #endif
-#if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
+#if defined(TTGO_LORA32_V2_1) || defined(TTGO_LORA32_V2_1_915)
    #define INTERNAL_LED_PIN    25      // Green Led
    #define BATTERY_PIN         35
 #endif
@@ -256,7 +277,14 @@
    #define RADIO_BUSY_PIN      8
 #endif

-#if defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262)
+#ifdef LIGHTGATEWAY_1_0
+    #define BUTTON_PIN          0
+    #define INTERNAL_LED_PIN    16
+#endif
+
+
+//      GPS
+#if defined(TTGO_T_BEAM_V1_2) || defined(TTGO_T_BEAM_V1_2_915) || defined(TTGO_T_BEAM_V1_0) || defined(TTGO_T_BEAM_V1_0_915) || defined(TTGO_T_BEAM_V1_0_SX1268) || defined(TTGO_T_BEAM_V1_2_SX1262)
    #define GPS_RX              12
    #define GPS_TX              34
 #endif
@@ -266,6 +294,7 @@
    #define GPS_TX              33
 #endif

+
 /* (Same pins for LILYGO LoRa32 and ESP32 Wroom Dev )
 SX1278-------------------> ESP32 ttgo-lora32-v21 and ESP32 WROOM Dev
 GND                         GND
@@ -281,4 +310,22 @@ DIO0                        26
 REST                        14
 GND                         -  */

+
+#ifdef TTGO_LORA32_T3S3_V1_2
+    #define RADIO_SCLK_PIN      5       // SX1262 SCK
+    #define RADIO_MISO_PIN      3       // SX1262 MISO
+    #define RADIO_MOSI_PIN      6       // SX1262 MOSI
+    #define RADIO_CS_PIN        7       // SX1262 NSS
+    #define RADIO_RST_PIN       8       // SX1262 RST
+    #define RADIO_DIO1_PIN      33      // SX1262 DIO1
+    #define RADIO_BUSY_PIN      34      // SX1262 BUSY
+
+    #define OLED_SDA            18
+    #define OLED_SCL            17
+    #define OLED_RST            -1
+
+    #define INTERNAL_LED_PIN    37      // Green Led
+    #define BATTERY_PIN         1
+#endif
+
 #endif
--- a/src/display.cpp
+++ b/src/display.cpp
@@ -33,9 +33,11 @@
    #endif
 #endif
    
-extern Configuration Config;
+extern  Configuration   Config;
+
+String  oldHeader, oldFirstLine, oldSecondLine, oldThirdLine, oldFourthLine, oldFifthLine, oldSixthLine;
+bool    displayFound    = false;

-String oldHeader, oldFirstLine, oldSecondLine, oldThirdLine, oldFourthLine, oldFifthLine, oldSixthLine;

 void cleanTFT() {
    #ifdef HAS_TFT
@@ -67,20 +69,19 @@ void displaySetup() {
                    digitalWrite(OLED_RST, HIGH);
                #endif

-                if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { 
-                    Serial.println(F("SSD1306 allocation failed"));
-                    for(;;); // Don't proceed, loop forever
-                }
-                if (Config.display.turn180) {
+                if(display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
+                    displayFound = true;
+                    if (Config.display.turn180) {
                    display.setRotation(2);
-                }
-                display.clearDisplay();
-                display.setTextColor(WHITE);
-                display.setTextSize(1);
-                display.setCursor(0, 0);
-                display.ssd1306_command(SSD1306_SETCONTRAST);
-                display.ssd1306_command(1);
-                display.display();
+                    }
+                    display.clearDisplay();
+                    display.setTextColor(WHITE);
+                    display.setTextSize(1);
+                    display.setCursor(0, 0);
+                    display.ssd1306_command(SSD1306_SETCONTRAST);
+                    display.ssd1306_command(1);
+                    display.display();
+                }                
            #endif
        #endif
        delay(1000);
@@ -96,7 +97,7 @@ void displayToggle(bool toggle) {
                #if HAS_EPAPER
                    // ... to be continued
                #else
-                    display.ssd1306_command(SSD1306_DISPLAYON);
+                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYON);
                #endif
            #endif
        } else {
@@ -106,7 +107,7 @@ void displayToggle(bool toggle) {
                #if HAS_EPAPER
                    // ... to be continued
                #else
-                    display.ssd1306_command(SSD1306_DISPLAYOFF);
+                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYOFF);
                #endif
            #endif
        }
@@ -160,18 +161,20 @@ void displayShow(const String& header, const String& line1, const String& line2,
            #ifdef HAS_EPAPER
                // ... to be continued
            #else
-                display.clearDisplay();
-                display.setTextColor(WHITE);
-                display.setTextSize(1);
-                display.setCursor(0, 0);
-                display.println(header);
-                for (int i = 0; i < 3; i++) {
-                    display.setCursor(0, 8 + (8 * i));
-                    display.println(*lines[i]);
+                if (displayFound) {
+                    display.clearDisplay();
+                    display.setTextColor(WHITE);
+                    display.setTextSize(1);
+                    display.setCursor(0, 0);
+                    display.println(header);
+                    for (int i = 0; i < 3; i++) {
+                        display.setCursor(0, 8 + (8 * i));
+                        display.println(*lines[i]);
+                    }
+                    display.ssd1306_command(SSD1306_SETCONTRAST);
+                    display.ssd1306_command(1);
+                    display.display();
                }
-                display.ssd1306_command(SSD1306_SETCONTRAST);
-                display.ssd1306_command(1);
-                display.display();
            #endif
        #endif
        delay(wait);
@@ -198,19 +201,21 @@ void displayShow(const String& header, const String& line1, const String& line2,
            #ifdef HAS_EPAPER
                // ... to be continued
            #else
-                display.clearDisplay();
-                display.setTextColor(WHITE);
-                display.setTextSize(2);
-                display.setCursor(0, 0);
-                display.println(header);
-                display.setTextSize(1);
-                for (int i = 0; i < 6; i++) {
-                    display.setCursor(0, 16 + (8 * i));
-                    display.println(*lines[i]);
+                if (displayFound) {
+                    display.clearDisplay();
+                    display.setTextColor(WHITE);
+                    display.setTextSize(2);
+                    display.setCursor(0, 0);
+                    display.println(header);
+                    display.setTextSize(1);
+                    for (int i = 0; i < 6; i++) {
+                        display.setCursor(0, 16 + (8 * i));
+                        display.println(*lines[i]);
+                    }
+                    display.ssd1306_command(SSD1306_SETCONTRAST);
+                    display.ssd1306_command(1);
+                    display.display();
                }
-                display.ssd1306_command(SSD1306_SETCONTRAST);
-                display.ssd1306_command(1);
-                display.display();
            #endif
        #endif
        delay(wait);
--- a/src/lora_utils.cpp
+++ b/src/lora_utils.cpp
@@ -20,7 +20,12 @@ bool transmitFlag    = true;
    SX1262 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
 #endif
 #ifdef HAS_SX1268
-    SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
+    #if defined(LIGHTGATEWAY_1_0)
+        SPIClass loraSPI(FSPI);
+        SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN, loraSPI); 
+    #else
+        SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
+    #endif
 #endif
 #ifdef HAS_SX1278
    SX1278 radio = new Module(RADIO_CS_PIN, RADIO_BUSY_PIN, RADIO_RST_PIN);
@@ -42,7 +47,13 @@ namespace LoRa_Utils {
    }

    void setup() {
-        SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
+        #ifdef LIGHTGATEWAY_1_0
+            pinMode(RADIO_VCC_PIN,OUTPUT);
+            digitalWrite(RADIO_VCC_PIN,HIGH);
+            loraSPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN, RADIO_CS_PIN);
+        #else
+            SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
+        #endif
        float freq = (float)Config.loramodule.rxFreq / 1000000;
        #if defined(RADIO_HAS_XTAL)
            radio.XTAL = true;
@@ -70,7 +81,7 @@ namespace LoRa_Utils {
        radio.setCodingRate(Config.loramodule.codingRate4);
        radio.setCRC(true);

-        #if defined(RADIO_RXEN) && defined(RADIO_TXEN)
+        #if (defined(RADIO_RXEN) && defined(RADIO_TXEN)) || defined(LIGHTGATEWAY_1_0)   // QRP Labs LightGateway has 400M22S (SX1268)
            radio.setRfSwitchPins(RADIO_RXEN, RADIO_TXEN);
        #endif

--- a/src/power_utils.cpp
+++ b/src/power_utils.cpp
@@ -205,7 +205,7 @@ namespace POWER_Utils {
            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
        #endif

-        #if defined(HELTEC_V3) || defined(HELTEC_WS)
+        #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(TTGO_LORA32_T3S3_V1_2)
            Wire.begin(OLED_SDA, OLED_SCL);
        #endif
        
--- a/src/wifi_utils.cpp
+++ b/src/wifi_utils.cpp
@@ -27,11 +27,11 @@ namespace WIFI_Utils {
            if (backUpDigiMode) {
                uint32_t WiFiCheck = millis() - lastBackupDigiTime;
                if (WiFi.status() != WL_CONNECTED && WiFiCheck >= 15 * 60 * 1000) {
-                    Serial.println("*** Stoping BackUp Digi Mode ***");
+                    Serial.println("*** Stopping BackUp Digi Mode ***");
                    backUpDigiMode = false;
                    wifiCounter = 0;
                } else if (WiFi.status() == WL_CONNECTED) {
-                    Serial.println("*** WiFi Reconnect Success (Stoping Backup Digi Mode) ***");
+                    Serial.println("*** WiFi Reconnect Success (Stopping Backup Digi Mode) ***");
                    backUpDigiMode = false;
                    wifiCounter = 0;
                }
@@ -78,7 +78,7 @@ namespace WIFI_Utils {
            WiFi.disconnect();
            delay(500);
            unsigned long start = millis();
-            displayShow("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
+            displayShow("", "Connecting to WiFi:", "", currentWiFi->ssid + " ...", 0);
            Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
            WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
            while (WiFi.status() != WL_CONNECTED && wifiCounter<myWiFiAPSize) {
@@ -103,7 +103,7 @@ namespace WIFI_Utils {
                    currentWiFi = &Config.wifiAPs[myWiFiAPIndex];
                    start = millis();
                    Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
-                    displayShow("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
+                    displayShow("", "Connecting to WiFi:", "", currentWiFi->ssid + " ...", 0);
                    WiFi.disconnect();
                    WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
                }
Author	SHA1	Message	Date
richonguzman	3c27e52df7	readme update for T3S3	2024-10-29 10:13:23 -03:00
richonguzman	3d5f3a4914	add Lilygo T3S3	2024-10-29 09:57:26 -03:00
richonguzman	db6292ce59	added but reboots	2024-10-28 09:33:27 -03:00
richonguzman	7995d23779	cleaned	2024-10-25 15:56:03 -03:00
richonguzman	7f150bc4a0	minor letter fix	2024-10-25 15:22:24 -03:00
richonguzman	ff5650f0c5	readme and build update	2024-10-25 12:50:15 -03:00
richonguzman	a91f0f3f3c	WIRE update	2024-10-25 11:50:57 -03:00
richonguzman	c9577b6c21	more display testing	2024-10-25 11:08:00 -03:00
richonguzman	10cb7c6e45	added LightGateway	2024-10-25 10:42:15 -03:00
richonguzman	99052e594a	typo fix	2024-10-23 12:09:24 -03:00
richonguzman	a05917c494	update	2024-10-22 22:14:29 -03:00
richonguzman	e2e935797f	images update for V2.1	2024-10-21 12:26:40 -03:00