mirror of
https://github.com/RonMeier/LoRa-Monitor.git
synced 2026-04-30 10:35:06 +02:00
40 lines
2.0 KiB
Markdown
40 lines
2.0 KiB
Markdown
# LoRa P2P + LoRaWAN Node
|
||
|
||
## Overview
|
||
* integrated web server
|
||
|
||
* LoRa to MQTT, LoRa to HTTP, LoRa to UDP
|
||
|
||
* receive + transmit LoRa P2P and LoRaWAN packets
|
||
|
||
* Rules to execute specific commands, Scanner with LoRaWAN and Mesh activity measurement, switchable relay outputs, Auto-Discovery, Simplex-, Duplex-, Repeater-mode, etc.
|
||
|
||
* "LoRa to LoRaWAN - Bridge" for example, you can forward sensor data received via P2P to LoRaAWN
|
||
or send control commands received via LoRaWAN back out via LoRa P2P
|
||
|
||
* The corresponding 433 MHz models are also supported
|
||
<br>
|
||
|
||
## Hardware Requirements
|
||
|
||
Heltec WIFI LoRa esp32 [V2](https://heltec.org/project/wifi-lora-32v2/) [V3](https://heltec.org/project/wifi-lora-32v3/)
|
||
[V4](https://heltec.org/project/wifi-lora-32-v4/) [VM E213](https://heltec.org/project/vision-master-e213) (868/915)
|
||
|
||
[LilyGo TTGO LoRa esp32 V2 1.6.1](https://github.com/LilyGO/TTGO-LoRa32-V2.1) + SD-card support (433/868/915)
|
||
|
||
[LilyGo TTGO T3S3 H596 with SX1276](https://www.lilygo.cc/products/t3s3-v1-0?variant=42586879688885) (868/915)
|
||
|
||
[LilyGo TTGO T3S3 H595 with SX1262](https://www.lilygo.cc/products/t3s3-v1-0?variant=42586879721653) (868/915)
|
||
support for SD, Oled-Display or [E-Paper-Display](https://www.bastelgarage.ch/lora/lora-kits-boards/lilygo-lora-t3s3-e-paper-esp32-s3-868mhz-sx1262)
|
||
<br>
|
||
|
||
|
||
You can flash your device directly using the [LoRa Monitor – Firmware Flasher](https://ronmeier.github.io/Lora-Web-Flasher)
|
||
Note: Not all web browsers support flashing via the serial port. Please use a compatible browser (e.g., Chrome or Edge).
|
||
|
||
After flashing, the device will open a WiFi access point (AP) named "Lora-Monitor".
|
||
Connect your smartphone (or computer) to this network, then open 192.168.4.1 in your web browser.
|
||
On the configuration page, enter your WiFi network name (SSID) and password. After saving, the ESP will automatically connect to your own network the next time it starts.
|
||
|
||
In order for the graphics to be displayed, 3 js files must be loaded from the /lib directory via WebUI
|