Update mesh_bot.py

Update config.template
tuypo
2025-08-12 11:54:17 -07:00 · 2025-08-12 11:50:05 -07:00 · 2025-08-12 11:42:13 -07:00 · 2025-08-12 11:35:42 -07:00 · 2025-08-04 18:54:46 -07:00 · 2025-08-03 17:43:10 -07:00
19 changed files with 708 additions and 295 deletions
--- a/README.md
+++ b/README.md
@@ -38,6 +38,7 @@ Welcome to the Mesh Bot project! This feature-rich bot is designed to enhance yo

 ### Proximity Alerts
 - **Location-Based Alerts**: Get notified when members arrive back at a configured lat/long, perfect for remote locations like campsites.
+- **High Flying Alerts**: Get notified when nodes with high altitude are seen on mesh

 ### CheckList / Check In Out
 - **Asset Tracking**: Maintain a list of node/asset checkin and checkout. Usefull for accountability of people, assets. Radio-Net, FEMA, Trailhead.
@@ -71,23 +72,97 @@ Welcome to the Mesh Bot project! This feature-rich bot is designed to enhance yo
 ## Getting Started
 This project is developed on Linux (specifically a Raspberry Pi) but should work on any platform where the [Meshtastic protobuf API](https://meshtastic.org/docs/software/python/cli/) modules are supported, and with any compatible [Meshtastic](https://meshtastic.org/docs/getting-started/) hardware. For pico or low-powered devices, see projects for embedding, [buildroot](https://github.com/buildroot-meshtastic/buildroot-meshtastic), also see [femtofox](https://github.com/noon92/femtofox). 🥔 Please use responsibly and follow local rulings for such equipment. This project captures packets, logs them, and handles over the air communications which can include PII such as GPS locations.

-### Installation
-
+### Quick Setup 
 #### Clone the Repository
 If you dont have git you will need it `sudo apt-get install git`
 ```sh
 git clone https://github.com/spudgunman/meshing-around
 ```
-The code is under active development, so make sure to pull the latest changes regularly!
-
-#### Quick setup
 - **Automated Installation**: `install.sh` will automate optional venv and requirements installation.
 - **Launch Script**: `launch.sh` only used in a venv install, to launch the bot and the report generator.

-#### Docker Installation
+## Full list of commands for the bot
+
+### Networking
+| Command | Description | ✅ Works Off-Grid |
+|---------|-------------|-
+| `ping`, `ack` | Return data for signal. Example: `ping 15 #DrivingI5` (activates auto-ping every 20 seconds for count 15) | ✅ |
+| `cmd` | Returns the list of commands (the help message) | ✅ |
+| `history` | Returns the last commands run by user(s) | ✅ |
+| `lheard` | Returns the last 5 heard nodes with SNR. Can also use `sitrep` | ✅ |
+| `motd` | Displays the message of the day or sets it. Example: `motd $New Message Of the day` | ✅ |
+| `sysinfo` | Returns the bot node telemetry info | ✅ |
+| `test` | used to test the limits of data transfer `test 4` sends data to the maxBuffer limit (default 220) | ✅ |
+| `whereami` | Returns the address of the sender's location if known |
+| `whoami` | Returns details of the node asking, also returned when position exchanged 📍 | ✅ |
+| `whois` | Returns details known about node, more data with bbsadmin node | ✅ |
+
+### Radio Propagation & Weather Forcasting
+| Command | Description | |
+|---------|-------------|-------------------
+| `ea` and `ealert` | Return FEMA iPAWS/EAS alerts in USA or DE Headline or expanded details for USA | |
+| `hfcond` | Returns a table of HF solar conditions | |
+| `rlist` | Returns a table of nearby repeaters from RepeaterBook | |
+| `riverflow` | Return information from NOAA for river flow info. Example: `riverflow modules/settings.py`| |
+| `solar` | Gives an idea of the x-ray flux | |
+| `sun` and `moon` | Return info on rise and set local time | ✅ |
+| `tide` | Returns the local tides (NOAA data source) | |
+| `valert` | Returns USGS Volcano Data | |
+| `wx` | Return local weather forecast, NOAA or Open Meteo (which also has `wxc` for metric and imperial) | |
+| `wxa` and `wxalert` | Return NOAA alerts. Short title or expanded details | |
+| `mwx` | Return the NOAA Coastal Marine Forcast data | |
+
+### Bulletin Board & Mail
+| Command | Description | |
+|---------|-------------|-
+| `bbshelp` | Returns the following help message | ✅ |
+| `bbslist` | Lists the messages by ID and subject | ✅ |
+| `bbsread` | Reads a message. Example: `bbsread #1` | ✅ |
+| `bbspost` | Posts a message to the public board or sends a DM(Mail) Examples: `bbspost $subject #message`, `bbspost @nodeNumber #message`, `bbspost @nodeShortName #message` | ✅ |
+| `bbsdelete` | Deletes a message. Example: `bbsdelete #4` | ✅ |
+| `bbsinfo` | Provides stats on BBS delivery and messages (sysop) | ✅ |
+| `bbslink` | Links Bulletin Messages between BBS Systems | ✅ |
+| `email:`  | Sends email to address on file for the node or `email: bob@test.net # hello from mesh` | |
+| `sms:`    | Send sms-email to multiple address on file | |
+| `setemail`| Sets the email for easy communciations | |
+| `setsms` | Adds the SMS-Email for quick communications | |
+| `clearsms` | Clears all SMS-Emails on file for node | |
+
+### Data Lookup 
+| Command | Description | |
+|---------|-------------|-
+| `askai` and `ask:` | Ask Ollama LLM AI for a response. Example: `askai what temp do I cook chicken` | ✅ |
+| `messages` | Replays the last messages heard, like Store and Forward | ✅ |
+| `readnews` | returns the contents of a file (news.txt, by default) via the chunker on air | ✅ |
+| `satpass` | returns the pass info from API for defined NORAD ID in config or Example: `satpass 25544,33591`| |
+| `wiki:` | Searches Wikipedia and returns the first few sentences of the first result if a match. Example: `wiki: lora radio` |
+
+### CheckList
+| Command | Description | |
+|---------|-------------|-
+| `checkin` | Check in the node to the checklist database, you can add a note like `checkin ICO` or `checkin radio4` | ✅ |
+| `checkout` | Checkout the node in the checklist database, checkout all from node | ✅ |
+| `checklist` | Display the checklist database, with note | ✅ |
+
+### Games (via DM)
+| Command | Description | |
+|---------|-------------|-
+| `blackjack` | Plays Blackjack (Casino 21) | ✅ |
+| `dopewars` | Plays the classic drug trader game | ✅ |
+| `golfsim` | Plays a 9-hole Golf Simulator | ✅ |
+| `hamtest` | FCC/ARRL Quiz `hamtest general` or `hamtest extra` and `score` | ✅ |
+| `hangman` | Plays the classic word guess game | ✅ |
+| `joke` | Tells a joke | ✅ |
+| `lemonstand` | Plays the classic Lemonade Stand finance game | ✅ |
+| `mastermind` | Plays the classic code-breaking game | ✅ |
+| `videopoker` | Plays basic 5-card hold Video Poker | ✅ |
+
+## Other Install Options
+
+### Docker Installation - handy for windows
 See further info on the [docker.md](script/docker/README.md)

-#### Manual Install
+### Manual Install
 Install the required dependencies using pip:
 ```sh
 pip install -r requirements.txt
@@ -147,7 +222,12 @@ enabled = True
 lat = 48.50
 lon = -123.0
 UseMeteoWxAPI = True
-riverListDefault = # NOAA Hydrology data, unique identifiers, LID or USGS ID
+
+coastalEnabled = False # NOAA Coastal Data Enable NOAA Coastal Waters Forecasts and Tide
+# Find the correct costal weather directory at https://tgftp.nws.noaa.gov/data/forecasts/marine/coastal/
+# this map can help https://www.weather.gov/marine select location and then look at the 'Forecast-by-Zone Map'
+myCoastalZone = https://tgftp.nws.noaa.gov/data/forecasts/marine/coastal/pz/pzz135.txt # myCoastalZone is the .txt file with the forecast data
+castalForecastDays = 3 # number of data points to return, default is 3
 ```

 ### Module Settings
@@ -181,6 +261,8 @@ SentryRadius = 100 # radius in meters to detect someone close to the bot
 SentryChannel = 9 # holdoff time multiplied by seconds(20) of the watchdog
 SentryHoldoff = 2 # channel to send a message to when the watchdog is triggered
 sentryIgnoreList = # list of ignored nodes numbers ex: 2813308004,4258675309
+highFlyingAlert = True # HighFlying Node alert
+highFlyingAlertAltitude = 2000 # Altitude in meters to trigger the alert
 ```

 ### E-Mail / SMS Settings
@@ -212,20 +294,21 @@ alert_interface = 1
 To Alert on Mesh with the EAS API you can set the channels and enable, checks every 20min.

 #### FEMA iPAWS/EAS and NINA
-This uses USA: SAME, FIPS, ZIP code to locate the alerts in the feed. By default ignoring Test messages.
+This uses USA: SAME, FIPS, to locate the alerts in the feed. By default ignoring Test messages.

 ```ini
 eAlertBroadcastEnabled = False # Goverment IPAWS/CAP Alert Broadcast
 eAlertBroadcastCh = 2,3 # Goverment Emergency IPAWS/CAP Alert Broadcast Channels
 ignoreFEMAenable = True # Ignore any headline that includes followig word list
 ignoreFEMAwords = test,exercise
-# comma separated list of codes (e.g., SAME,FIPS,ZIP) trigger local alert.
-# find your SAME https://www.weather.gov/nwr/counties
-mySAME = 053029,053073
+# comma separated list of FIPS codes to trigger local alert. find your FIPS codes at https://en.wikipedia.org/wiki/Federal_Information_Processing_Standard_state_code
+myFIPSList = 57,58,53
+# find your SAME https://www.weather.gov/nwr/counties comma separated list of SAME code to further refine local alert.
+mySAMEList = 053029,053073

 # To use other country services enable only a single optional serivce
-
 enableDEalerts = False # Use DE Alert Broadcast Data see template for filters
+myRegionalKeysDE = 110000000000,120510000000
 ```

 #### NOAA EAS
@@ -236,6 +319,22 @@ enableDEalerts = False # Use DE Alert Broadcast Data see template for filters
 wxAlertBroadcastEnabled = True
 # EAS Alert Broadcast Channels
 wxAlertBroadcastCh = 2,4
+ignoreEASenable = True # Ignore any headline that includes followig word list
+ignoreEASwords = test,advisory
+```
+
+#### USGS River flow data and Volcano alerts
+Using the USGS water data page locate a water flow device, for example Columbia River at Vancouver, WA - USGS-14144700
+
+Volcano Alerts use lat/long to determine ~1000km radius
+```ini
+[location]
+# USGS Hydrology unique identifiers, LID or USGS ID https://waterdata.usgs.gov
+riverListDefault = 14144700
+
+# USGS Volcano alerts Enable USGS Volcano Alert Broadcast
+volcanoAlertBroadcastEnabled = False
+volcanoAlertBroadcastCh = 2
 ```

 ### Repeater Settings
@@ -334,9 +433,20 @@ In the config.ini enable the module
 ```ini
 [scheduler]
 # enable or disable the scheduler module
-enabled = True
+enabled = False
+# interface to send the message to
+interface = 1
+# channel to send the message to
+channel = 2
+message = "MeshBot says Hello! DM for more info."
+# value can be min,hour,day,mon,tue,wed,thu,fri,sat,sun
+value =
+# interval to use when time is not set (e.g. every 2 days)
+interval = 
+# time of day in 24:00 hour format when value is 'day' and interval is not set
+time =
 ```
- The actions are via code only at this time. See mesh_bot.py around line [1097](https://github.com/SpudGunMan/meshing-around/blob/e94581936530c76ea43500eebb43f32ba7ed5e19/mesh_bot.py#L1097) to edit the schedule. See [schedule documentation](https://schedule.readthedocs.io/en/stable/) for more. Recomend to backup changes so they dont get lost.
+ The basic brodcast message can be setup in condig.ini. For advanced, See mesh_bot.py around the bottom of file, line [1491](https://github.com/SpudGunMan/meshing-around/blob/e94581936530c76ea43500eebb43f32ba7ed5e19/mesh_bot.py#L1491) to edit the schedule. See [schedule documentation](https://schedule.readthedocs.io/en/stable/) for more. Recomend to backup changes so they dont get lost.

 ```python
 #Send WX every Morning at 08:00 using handle_wxc function to channel 2 on device 1
@@ -362,81 +472,6 @@ There is no direct support for MQTT in the code, however, reports from Discord a

 ~~There also seems to be a quicker way to enable MQTT by having your bot node with the enabled [serial](https://meshtastic.org/docs/configuration/module/serial/) module with echo enabled and MQTT uplink and downlink. These two~~ 

-## Full list of commands for the bot
-
-### Networking
-| Command | Description | ✅ Works Off-Grid |
-|---------|-------------|-
-| `ping`, `ack` | Return data for signal. Example: `ping 15 #DrivingI5` (activates auto-ping every 20 seconds for count 15) | ✅ |
-| `cmd` | Returns the list of commands (the help message) | ✅ |
-| `history` | Returns the last commands run by user(s) | ✅ |
-| `lheard` | Returns the last 5 heard nodes with SNR. Can also use `sitrep` | ✅ |
-| `motd` | Displays the message of the day or sets it. Example: `motd $New Message Of the day` | ✅ |
-| `sysinfo` | Returns the bot node telemetry info | ✅ |
-| `test` | used to test the limits of data transfer `test 4` sends data to the maxBuffer limit (default 220) | ✅ |
-| `whereami` | Returns the address of the sender's location if known |
-| `whoami` | Returns details of the node asking, also returned when position exchanged 📍 | ✅ |
-| `whois` | Returns details known about node, more data with bbsadmin node | ✅ |
-
-### Radio Propagation & Weather Forcasting
-| Command | Description | |
-|---------|-------------|-------------------
-| `ea` and `ealert` | Return FEMA iPAWS/EAS alerts in USA or DE Headline or expanded details for USA | |
-| `hfcond` | Returns a table of HF solar conditions | |
-| `rlist` | Returns a table of nearby repeaters from RepeaterBook | |
-| `riverflow` | Return information from NOAA for river flow info. Example: `riverflow modules/settings.py`| |
-| `solar` | Gives an idea of the x-ray flux | |
-| `sun` and `moon` | Return info on rise and set local time | ✅ |
-| `tide` | Returns the local tides (NOAA data source) | |
-| `valert` | Returns USGS Volcano Data | |
-| `wx` and `wxc` | Return local weather forecast (wxc is metric value), NOAA or Open Meteo for weather forecasting | |
-| `wxa` and `wxalert` | Return NOAA alerts. Short title or expanded details | |
-
-### Bulletin Board & Mail
-| Command | Description | |
-|---------|-------------|-
-| `bbshelp` | Returns the following help message | ✅ |
-| `bbslist` | Lists the messages by ID and subject | ✅ |
-| `bbsread` | Reads a message. Example: `bbsread #1` | ✅ |
-| `bbspost` | Posts a message to the public board or sends a DM(Mail) Examples: `bbspost $subject #message`, `bbspost @nodeNumber #message`, `bbspost @nodeShortName #message` | ✅ |
-| `bbsdelete` | Deletes a message. Example: `bbsdelete #4` | ✅ |
-| `bbsinfo` | Provides stats on BBS delivery and messages (sysop) | ✅ |
-| `bbslink` | Links Bulletin Messages between BBS Systems | ✅ |
-| `email:`  | Sends email to address on file for the node or `email: bob@test.net # hello from mesh` | |
-| `sms:`    | Send sms-email to multiple address on file | |
-| `setemail`| Sets the email for easy communciations | |
-| `setsms` | Adds the SMS-Email for quick communications | |
-| `clearsms` | Clears all SMS-Emails on file for node | |
-
-### Data Lookup 
-| Command | Description | |
-|---------|-------------|-
-| `askai` and `ask:` | Ask Ollama LLM AI for a response. Example: `askai what temp do I cook chicken` | ✅ |
-| `messages` | Replays the last messages heard, like Store and Forward | ✅ |
-| `readnews` | returns the contents of a file (news.txt, by default) via the chunker on air | ✅ |
-| `satpass` | returns the pass info from API for defined NORAD ID in config or Example: `satpass 25544,33591`| |
-| `wiki:` | Searches Wikipedia and returns the first few sentences of the first result if a match. Example: `wiki: lora radio` |
-
-### CheckList
-| Command | Description | |
-|---------|-------------|-
-| `checkin` | Check in the node to the checklist database, you can add a note like `checkin ICO` or `checkin radio4` | ✅ |
-| `checkout` | Checkout the node in the checklist database, checkout all from node | ✅ |
-| `checklist` | Display the checklist database, with note | ✅ |
-
-### Games (via DM)
-| Command | Description | |
-|---------|-------------|-
-| `blackjack` | Plays Blackjack (Casino 21) | ✅ |
-| `dopewars` | Plays the classic drug trader game | ✅ |
-| `golfsim` | Plays a 9-hole Golf Simulator | ✅ |
-| `hamtest` | FCC/ARRL Quiz `hamtest general` or `hamtest extra` and `score` | ✅ |
-| `hangman` | Plays the classic word guess game | ✅ |
-| `joke` | Tells a joke | ✅ |
-| `lemonstand` | Plays the classic Lemonade Stand finance game | ✅ |
-| `mastermind` | Plays the classic code-breaking game | ✅ |
-| `videopoker` | Plays basic 5-card hold Video Poker | ✅ |
-
 # Recognition

 I used ideas and snippets from other responder bots and want to call them out!
@@ -466,6 +501,7 @@ I used ideas and snippets from other responder bots and want to call them out!
 - **Josh**: For more bashing on installer!
 - **dj505**: trying it on windows!
 - **mikecarper**: ideas, and testing. hamtest
+- **c.merphy360**: high altitude alerts
 - **Cisien, bitflip, **Woof**, **propstg**, **trs2982**, **Josh** and Hailo1999**: For testing and feature ideas on Discord and GitHub.
 - **Meshtastic Discord Community**: For tossing out ideas and testing code.

--- a/config.template
+++ b/config.template
@@ -60,6 +60,9 @@ ollama = False
 # ollamaModel = llama3.1
 # server instance to use (defaults to local machine install)
 ollamaHostName = http://localhost:11434
+# Produce LLM replies to messages that aren't commands?
+# If False, the LLM only replies to the "ask:" and "askai" commands.
+llmReplyToNonCommands = True

 # StoreForward Enabled and Limits
 StoreForward = True
@@ -84,6 +87,9 @@ sysloglevel = DEBUG
 # Number of log files to keep in days, 0 to keep all
 log_backup_count = 32

+#Do not retry enabling interface if it fails, just exit to let OS restart the bot
+dont_retry_disconnect = False
+
 [emergencyHandler]
 # enable or disable the emergency response handler
 enabled = False
@@ -102,7 +108,16 @@ SentryChannel = 2
 # holdoff time multiplied by seconds(20) of the watchdog
 SentryHoldoff = 9
 # list of ignored nodes numbers ex: 2813308004,4258675309
-sentryIgnoreList = 
+sentryIgnoreList =
+
+# HighFlying Node alert
+highFlyingAlert = True
+# Altitude in meters to trigger the alert
+highFlyingAlertAltitude = 2000
+# Channel to send Alert when the high flying node is detected
+highFlyingAlertChannel = 2
+# list of nodes numbers to ignore high flying alert ex: 2813308004,4258675309
+highFlyingIgnoreList =

 [bbs]
 enabled = True
@@ -135,11 +150,24 @@ NOAAalertCount = 2
 # use Open-Meteo API for weather data not NOAA useful for non US locations
 UseMeteoWxAPI = False

-# NOAA Hydrology unique identifiers, LID or USGS ID
+# NOAA Coastal Data Enable NOAA Coastal Waters Forecasts and Tide
+coastalEnabled = False
+# Find the correct costal weather directory at https://tgftp.nws.noaa.gov/data/forecasts/marine/coastal/
+# pz = Puget Sound, ph = Honolulu HI, gm = Florida Keys, pk = Alaska
+# this map can help https://www.weather.gov/marine select location and then look at the 'Forecast-by-Zone Map'
+# myCoastalZone is the .txt file with the forecast data
+myCoastalZone = https://tgftp.nws.noaa.gov/data/forecasts/marine/coastal/pz/pzz135.txt
+# number of data points to return, default is 3
+coastalForecastDays = 3
+
+# USGS Hydrology unique identifiers, LID or USGS ID https://waterdata.usgs.gov
 riverListDefault = 

 # NOAA EAS Alert Broadcast
 wxAlertBroadcastEnabled = False
+#  Enable Ignore any message that includes following word list
+ignoreEASenable = False
+ignoreEASwords = test,advisory
 # EAS Alert Broadcast Channels
 wxAlertBroadcastCh = 2
 # Add extra location to the weather alert
@@ -147,20 +175,22 @@ enableExtraLocationWx = False

 # Goverment Alert Broadcast defaults to FEMA IPAWS
 eAlertBroadcastEnabled = False
+# comma separated list of FIPS codes to trigger local alert. find your FIPS codes at https://en.wikipedia.org/wiki/Federal_Information_Processing_Standard_state_code
+myFIPSList = 57,58,53
+# find your SAME https://www.weather.gov/nwr/counties comma separated list of SAME code to further refine local alert.
+mySAMEList = 053029,053073
 # Goverment Alert Broadcast Channels
 eAlertBroadcastCh = 2
-
-# FEMA Alert Broadcast Settings
-#  Enable Ignore any headline that includes followig word list
+#  Enable Ignore, headline that includes following word list
 ignoreFEMAenable = True
 ignoreFEMAwords = test,exercise
-# comma separated list of codes (e.g., SAME,FIPS,ZIP) trigger local alert.
-# find your SAME https://www.weather.gov/nwr/counties
-mySAME = 053029,053073

 # USGS Volcano alerts Enable USGS Volcano Alert Broadcast
 volcanoAlertBroadcastEnabled = False
 volcanoAlertBroadcastCh = 2
+# Enable Ignore any message that includes following word list
+ignoreUSGSEnable = False
+ignoreUSGSWords = test,advisory

 # Use DE Alert Broadcast Data
 enableDEalerts = False
@@ -184,7 +214,7 @@ reverse_in_out = False
 # QRZ Hello to new nodes with message
 enabled = False
 qrz_db = data/qrz.db
-qrz_hello_string = "send CMD or DM me for more info."
+qrz_hello_string = "MeshBot says Hello! DM for more info."
 # Training mode will not send the hello message to new nodes
 training = True

@@ -200,6 +230,17 @@ repeater_channels =
 [scheduler]
 # enable or disable the scheduler module
 enabled = False
+# interface to send the message to
+interface = 1
+# channel to send the message to
+channel = 2
+message = "MeshBot says Hello! DM for more info."
+# value can be min,hour,day,mon,tue,wed,thu,fri,sat,sun
+value =
+# interval to use when time is not set (e.g. every 2 days)
+interval = 
+# time of day in 24:00 hour format when value is 'day' and interval is not set
+time =

 [radioMon]
 # using Hamlib rig control will monitor and alert on channel use
@@ -266,15 +307,17 @@ hangman = True
 hamtest = True

 [messagingSettings]
-# delay in seconds for response to avoid message collision
-responseDelay = 1.2
-# delay in seconds for splits in messages to avoid message collision
-splitDelay = 0.0
+# delay in seconds for response to avoid message collision /throttling
+responseDelay = 2.2
+# delay in seconds for splits in messages to avoid message collision /throttling
+splitDelay = 2.5
 # message chunk size for sending at high success rate, chunkr allows exceeding by 3 characters
 MESSAGE_CHUNK_SIZE = 160
 # Request Acknowledgement of message OTA
 wantAck = False
-# Max limit buffer for radio testing. 233 is hard limit 2.5+ firmware
+# Max limit buffer for radio testing
 maxBuffer = 200
+#Enable Extra logging of Hop count data
+enableHopLogs = False


--- a/etc/report_generator.py
+++ b/etc/report_generator.py
@@ -350,7 +350,8 @@ def get_database_info():
                     os.path.join(base_dir, 'mmind_hs.pkl'),
                     os.path.join(base_dir, 'golfsim_hs.pkl'),
                     os.path.join(base_dir, 'bbsdb.pkl'),
-                     os.path.join(base_dir, 'bbsdm.pkl')]
+                     os.path.join(base_dir, 'bbsdm.pkl'),
+                     os.path.join(base_dir, 'qrz.db')]
    
    for file in databaseFiles:
        try:
@@ -371,6 +372,16 @@ def get_database_info():
                    bbsdb = pickle.load(f)
                elif 'bbsdm' in file:
                    bbsdm = pickle.load(f)
+                elif 'qrz.db' in file:
+                    # open the qrz.db sqllite file 
+                    import sqlite3
+                    conn = sqlite3.connect(file)
+                    cursor = conn.cursor()
+                    cursor.execute("SELECT * FROM qrz")
+                    qrz_db = cursor.fetchall()
+                    # convert to a list of strings
+                    qrz_db = [f"{row[0]}: {row[1]} {row[2]}" for row in qrz_db]
+                    conn.close()
        except Exception as e:
            print(f"Warning issue reading database file: {str(e)}")
            if 'lemonstand' in file:
@@ -425,7 +436,8 @@ def get_database_info():
        'golfsim_score': golfsim_score,
        'banList': banList,
        'adminList': adminList,
-        'sentryIgnoreList': sentryIgnoreList
+        'sentryIgnoreList': sentryIgnoreList,
+        'qrz_db': qrz_db if 'qrz_db' in locals() else "no data"
    }

 def generate_main_html(log_data, system_info):
@@ -913,6 +925,11 @@ def generate_database_html(database_info):
            <tr><td>Mastermind</td><td>${mmind_score}</td></tr>
            <tr><td>Golf Simulator</td><td>${golfsim_score}</td></tr>
        </table>
+        <h1>QRZ Database</h1>
+        <p>QRZ Database holds heard nodeID and Shortname</p>
+        <table>
+            <tr><td>${qrz_db}</td></tr>
+        </table>
    </body>
    </html>
    """
--- a/etc/report_generator5.py
+++ b/etc/report_generator5.py
@@ -359,7 +359,8 @@ def get_database_info():
                     os.path.join(base_dir, 'mmind_hs.pkl'),
                     os.path.join(base_dir, 'golfsim_hs.pkl'),
                     os.path.join(base_dir, 'bbsdb.pkl'),
-                     os.path.join(base_dir, 'bbsdm.pkl')]
+                     os.path.join(base_dir, 'bbsdm.pkl'),
+                     os.path.join(base_dir, 'qrz.db')]
    
    for file in databaseFiles:
        try:
@@ -380,6 +381,16 @@ def get_database_info():
                    bbsdb = pickle.load(f)
                elif 'bbsdm' in file:
                    bbsdm = pickle.load(f)
+                elif 'qrz.db' in file:
+                    #open the qrz.db sqllite file 
+                    import sqlite3
+                    conn = sqlite3.connect(file)
+                    cursor = conn.cursor()
+                    cursor.execute("SELECT * FROM qrz")
+                    qrz_db = cursor.fetchall()
+                    # convert to a list of strings
+                    qrz_db = [f"{row[0]}: {row[1]} {row[2]}" for row in qrz_db]
+                    conn.close()
        except Exception as e:
            print(f"Warning issue reading database file: {str(e)}")
            if 'lemonstand' in file:
@@ -434,7 +445,8 @@ def get_database_info():
        'golfsim_score': golfsim_score,
        'banList': banList,
        'adminList': adminList,
-        'sentryIgnoreList': sentryIgnoreList
+        'sentryIgnoreList': sentryIgnoreList,
+        'qrz_db': qrz_db if 'qrz_db' in locals() else "no data"
    }

 def generate_main_html(log_data, system_info):
@@ -1207,6 +1219,11 @@ def generate_database_html(database_info):
            <tr><td>Mastermind</td><td>${mmind_score}</td></tr>
            <tr><td>Golf Simulator</td><td>${golfsim_score}</td></tr>
        </table>
+        <h1>QRZ Database</h1>
+        <p>QRZ Database holds heard nodeID and Shortname</p>
+        <table>
+            <tr><td>${qrz_db}</td></tr>
+        </table>
    </body>
    </html>
    """
--- a/install.sh
+++ b/install.sh
@@ -4,6 +4,7 @@
 # install.sh
 cd "$(dirname "$0")"
 program_path=$(pwd)
+chronjob="0 1 * * * /usr/bin/python3 $program_path/etc/report_generator5.py"
 printf "\n########################"
 printf "\nMeshing Around Installer\n"
 printf "########################\n"
@@ -193,17 +194,19 @@ if [[ $(echo "${meshbotservice}" | grep -i "^y") ]] || [[ $(echo "${embedded}" |
    sudo usermod -a -G meshbot meshbot
    whoami="meshbot"
    echo "Added user meshbot with no home directory"
-    sudo usermod -a -G dialout $whoami
-    sudo usermod -a -G tty $whoami
-    sudo usermod -a -G bluetooth $whoami
-    echo "Added meshbot to dialout, tty, and bluetooth groups"
-
-    sudo chown -R $whoami:$whoami $program_path/logs
-    sudo chown -R $whoami:$whoami $program_path/data
-    echo "Permissions set for meshbot on logs and data directories"
 else
    whoami=$(whoami)
 fi
+# set basic permissions for the bot user
+sudo usermod -a -G dialout $whoami
+sudo usermod -a -G tty $whoami
+sudo usermod -a -G bluetooth $whoami
+echo "Added user $whoami to dialout, tty, and bluetooth groups"
+
+sudo chown -R $whoami:$whoami $program_path/logs
+sudo chown -R $whoami:$whoami $program_path/data
+echo "Permissions set for meshbot on logs and data directories"
+
 # set the correct user in the service file
 replace="s|User=pi|User=$whoami|g"
 sed -i $replace etc/pong_bot.service
@@ -276,6 +279,8 @@ if [[ $(echo "${embedded}" | grep -i "^n") ]]; then
    printf "sudo journalctl -u %s.service\n" "$service" >> install_notes.txt
    printf "sudo systemctl stop %s.service\n" "$service" >> install_notes.txt
    printf "sudo systemctl disable %s.service\n" "$service" >> install_notes.txt
+    printf "Reporting chron job added to run report_generator5.py\n" >> install_notes.txt
+    printf "chronjob: %s\n" "$chronjob" >> install_notes.txt
    
    if [[ $(echo "${venv}" | grep -i "^y") ]]; then
        printf "\nFor running on venv, virtual launch bot with './launch.sh mesh' in path $program_path\n" >> install_notes.txt
@@ -305,6 +310,14 @@ else
    sudo systemctl daemon-reload
    sudo systemctl enable $service.service
    sudo systemctl start $service.service
+    # check if the cron job already exists
+    if ! crontab -l | grep -q "$chronjob"; then
+        # add the cron job to run the report_generator5.py script
+        (crontab -l 2>/dev/null; echo "$chronjob") | crontab -
+        printf "\nAdded cron job to run report_generator5.py\n"
+    else
+        printf "\nCron job already exists, skipping\n"
+    fi
    printf "Reference following commands:\n\n" "$service" > install_notes.txt
    printf "sudo systemctl status %s.service\n" "$service" >> install_notes.txt
    printf "sudo systemctl start %s.service\n" "$service" >> install_notes.txt
@@ -328,7 +341,6 @@ exit 0
 # sudo systemctl stop mesh_bot_reporting
 # sudo systemctl disable mesh_bot_reporting
 # sudo rm /etc/systemd/system/mesh_bot.service
-# sudo rm /etc/systemd/system/mesh_bot_reporting.service
 # sudo rm /etc/systemd/system/mesh_bot_w3.service
 # sudo rm /etc/systemd/system/pong_bot.service
 # sudo systemctl daemon-reload
@@ -344,5 +356,5 @@ exit 0


 # after install shenannigans
-# add 'bee = True' to config.ini General section. You will likley want to clean the txt up a bit
-# wget https://courses.cs.washington.edu/courses/cse163/20wi/files/lectures/L04/bee-movie.txt -O bee.txt
+# add 'bee = True' to config.ini General section.
+# wget https://gist.github.com/MattIPv4/045239bc27b16b2bcf7a3a9a4648c08a -O bee.txt
--- a/logs/README.md
+++ b/logs/README.md
@@ -24,4 +24,18 @@ log_backup_count = 32
 ## Web Reporting WebServer
 There is a web-server module. You can run `python3 modules/web.py` from the project root directory and it will serve up the web content.

-find it at. http://localhost:8420
+find it at. http://localhost:8420
+
+If you have linux-native running and errors such as..
+```bash
+  File "/usr/lib/python3.11/http/server.py", line 136, in server_bind
+    socketserver.TCPServer.server_bind(self)
+  File "/usr/lib/python3.11/socketserver.py", line 472, in server_bind
+    self.socket.bind(self.server_address)
+```
+modify the modules/web.py to use a real IP address, meshtasticD-native is binding to 127.0.0.1
+
+```python
+# Set the desired IP address
+server_ip = '127.0.0.1'
+```
--- a/mesh_bot.py
+++ b/mesh_bot.py
@@ -20,7 +20,6 @@ restrictedResponse = "🤖only available in a Direct Message📵" # "" for none

 # Global Variables
 DEBUGpacket = False # Debug print the packet rx
-DEBUGhops = False # Debug print hop info and bad hop count packets

 def auto_response(message, snr, rssi, hop, pkiStatus, message_from_id, channel_number, deviceID, isDM):
    global cmdHistory
@@ -68,6 +67,7 @@ def auto_response(message, snr, rssi, hop, pkiStatus, message_from_id, channel_n
    "messages": lambda: handle_messages(message, deviceID, channel_number, msg_history, publicChannel, isDM),
    "moon": lambda: handle_moon(message_from_id, deviceID, channel_number),
    "motd": lambda: handle_motd(message, message_from_id, isDM),
+    "mwx": lambda: handle_mwx(message_from_id, deviceID, channel_number),
    "ping": lambda: handle_ping(message_from_id, deviceID, message, hop, snr, rssi, isDM, channel_number),
    "pinging": lambda: handle_ping(message_from_id, deviceID, message, hop, snr, rssi, isDM, channel_number),
    "pong": lambda: "🏓PING!!🛜",
@@ -751,6 +751,12 @@ def handle_riverFlow(message, message_from_id, deviceID):
        msg = get_flood_noaa(location[0], location[1], userRiver)
        return msg

+def handle_mwx(message_from_id, deviceID, cmd):
+    # NOAA Coastal and Marine Weather
+    if myCoastalZone is None:
+        logger.warning("System: Coastal Zone not set, please set in config.ini")
+        return NO_ALERTS
+    return get_nws_marine(zone=myCoastalZone, days=castalForecastDays)

 def handle_wxc(message_from_id, deviceID, cmd):
    location = get_node_location(message_from_id, deviceID)
@@ -805,7 +811,7 @@ def handle_bbspost(message, message_from_id, deviceID):
                toNode = int(toNode.strip("!"),16)
            except ValueError as e:
                toNode = 0
-        elif toNode.isalpha() or not toNode.isnumeric():
+        elif toNode.isalpha() or not toNode.isnumeric() or len(toNode) < 5:
            # try short name
            toNode = get_num_from_short_name(toNode, deviceID)

@@ -904,7 +910,7 @@ def handle_history(message, nodeid, deviceID, isDM, lheard=False):
            prettyTime = getPrettyTime(cmdTime)

            # history display output
-            if nodeid in bbs_admin_list and cmdHistory[i]['nodeID'] not in lheardCmdIgnoreNode:
+            if str(nodeid) in bbs_admin_list and cmdHistory[i]['nodeID'] not in lheardCmdIgnoreNode:
                buffer.append((get_name_from_number(cmdHistory[i]['nodeID'], 'short', deviceID), cmdHistory[i]['cmd'], prettyTime))
            elif cmdHistory[i]['nodeID'] == nodeid and cmdHistory[i]['nodeID'] not in lheardCmdIgnoreNode:
                buffer.append((get_name_from_number(nodeid, 'short', deviceID), cmdHistory[i]['cmd'], prettyTime))
@@ -1108,16 +1114,15 @@ def onReceive(packet, interface):
    
    if rxType == 'TCPInterface':
        rxHost = interface.__dict__.get('hostname', 'unknown')
-        if hostname1 in rxHost and interface1_type == 'tcp': rxNode = 1
-        elif multiple_interface and hostname2 in rxHost and interface2_type == 'tcp': rxNode = 2
-        elif multiple_interface and hostname3 in rxHost and interface3_type == 'tcp': rxNode = 3
-        elif multiple_interface and hostname4 in rxHost and interface4_type == 'tcp': rxNode = 4
-        elif multiple_interface and hostname5 in rxHost and interface5_type == 'tcp': rxNode = 5
-        elif multiple_interface and hostname6 in rxHost and interface6_type == 'tcp': rxNode = 6
-        elif multiple_interface and hostname7 in rxHost and interface7_type == 'tcp': rxNode = 7
-        elif multiple_interface and hostname8 in rxHost and interface8_type == 'tcp': rxNode = 8
-        elif multiple_interface and hostname9 in rxHost and interface9_type == 'tcp': rxNode = 9
-
+        if rxHost and hostname1 in rxHost and interface1_type == 'tcp': rxNode = 1
+        elif multiple_interface and rxHost and hostname2 in rxHost and interface2_type == 'tcp': rxNode = 2
+        elif multiple_interface and rxHost and hostname3 in rxHost and interface3_type == 'tcp': rxNode = 3
+        elif multiple_interface and rxHost and hostname4 in rxHost and interface4_type == 'tcp': rxNode = 4
+        elif multiple_interface and rxHost and hostname5 in rxHost and interface5_type == 'tcp': rxNode = 5
+        elif multiple_interface and rxHost and hostname6 in rxHost and interface6_type == 'tcp': rxNode = 6
+        elif multiple_interface and rxHost and hostname7 in rxHost and interface7_type == 'tcp': rxNode = 7
+        elif multiple_interface and rxHost and hostname8 in rxHost and interface8_type == 'tcp': rxNode = 8
+        elif multiple_interface and rxHost and hostname9 in rxHost and interface9_type == 'tcp': rxNode = 9
    if rxType == 'BLEInterface':
        if interface1_type == 'ble': rxNode = 1
        elif multiple_interface and interface2_type == 'ble': rxNode = 2
@@ -1194,7 +1199,7 @@ def onReceive(packet, interface):
                else:
                    hop_start = 0
            
-            if DEBUGhops:
+            if enableHopLogs:
                logger.debug(f"System: Packet HopDebugger: hop_away:{hop_away} hop_limit:{hop_limit} hop_start:{hop_start}")
                if hop_away == 0 and hop_limit == 0 and hop_start == 0:
                    logger.debug(f"System: Packet HopDebugger: No hop count found in PACKET {packet} END PACKET")
@@ -1226,7 +1231,7 @@ def onReceive(packet, interface):
                isDM = True
                # check if the message contains a trap word, DMs are always responded to
                if (messageTrap(message_string) and not llm_enabled) or messageTrap(message_string.split()[0]):
-                    # log the message to the message log
+                    # log the message to stdout
                    logger.info(f"Device:{rxNode} Channel: {channel_number} " + CustomFormatter.green + f"Received DM: " + CustomFormatter.white + f"{message_string} " + CustomFormatter.purple +\
                                "From: " + CustomFormatter.white + f"{get_name_from_number(message_from_id, 'long', rxNode)}")
                    # respond with DM
@@ -1244,7 +1249,7 @@ def onReceive(packet, interface):
                            playingGame = False

                    if not playingGame:
-                        if llm_enabled:
+                        if llm_enabled and llmReplyToNonCommands:
                            # respond with LLM
                            llm = handle_llm(message_from_id, channel_number, rxNode, message_string, publicChannel)
                            send_message(llm, channel_number, message_from_id, rxNode)
@@ -1273,7 +1278,8 @@ def onReceive(packet, interface):
                            time.sleep(responseDelay)
                            
                    # log the message to the message log
-                    msgLogger.info(f"Device:{rxNode} Channel:{channel_number} | {get_name_from_number(message_from_id, 'long', rxNode)} | " + message_string.replace('\n', '-nl-'))
+                    if log_messages_to_file:
+                        msgLogger.info(f"Device:{rxNode} Channel:{channel_number} | {get_name_from_number(message_from_id, 'long', rxNode)} | DM | " + message_string.replace('\n', '-nl-'))
            else:
                # message is on a channel
                if messageTrap(message_string):
@@ -1399,6 +1405,8 @@ async def start_rx():
            logger.debug("System: Location Telemetry Enabled using NOAA API")
    if dad_jokes_enabled:
        logger.debug("System: Dad Jokes Enabled!")
+    if coastalEnabled:
+        logger.debug("System: Coastal Forcast and Tide Enabled!")
    if games_enabled:
        logger.debug("System: Games Enabled!")
    if wikipedia_enabled:
@@ -1407,6 +1415,8 @@ async def start_rx():
        logger.debug(f"System: MOTD Enabled using {MOTD}")
    if sentry_enabled:
        logger.debug(f"System: Sentry Mode Enabled {sentry_radius}m radius reporting to channel:{secure_channel}")
+    if highfly_enabled:
+        logger.debug(f"System: HighFly Enabled using {highfly_altitude}m limit reporting to channel:{highfly_channel}")
    if store_forward_enabled:
        logger.debug(f"System: Store and Forward Enabled using limit: {storeFlimit}")
    if useDMForResponse:
@@ -1426,7 +1436,10 @@ async def start_rx():
    if wxAlertBroadcastEnabled:
        logger.debug(f"System: Weather Alert Broadcast Enabled on channels {wxAlertBroadcastChannel}")
    if emergencyAlertBrodcastEnabled:
-        logger.debug(f"System: Emergency Alert Broadcast Enabled on channels {emergencyAlertBroadcastCh}")
+        logger.debug(f"System: Emergency Alert Broadcast Enabled on channels {emergencyAlertBroadcastCh} for FIPS codes {myStateFIPSList}")
+        # check if the FIPS codes are set
+        if myStateFIPSList == ['']:
+            logger.warning(f"System: No FIPS codes set for iPAWS Alerts")
    if emergency_responder_enabled:
        logger.debug(f"System: Emergency Responder Enabled on channels {emergency_responder_alert_channel} for interface {emergency_responder_alert_interface}")
    if volcanoAlertBroadcastEnabled:
@@ -1445,11 +1458,51 @@ async def start_rx():
        else:
            logger.debug(f"System: SMTP Email Alerting Enabled")
    if scheduler_enabled:
-        # Examples of using the scheduler, Times here are in 24hr format
-        # https://schedule.readthedocs.io/en/stable/
-        
        # Reminder Scheduler is enabled every Monday at noon send a log message
-        schedule.every().monday.at("12:00").do(lambda: logger.info("System: Scheduled Broadcast Reminder"))
+        schedule.every().monday.at("12:00").do(lambda: logger.info("System: Scheduled Broadcast Enabled Reminder"))
+
+        # basic scheduler
+        if schedulerValue != '':
+            logger.debug(f"System: Starting the broadcast scheduler from config.ini")
+            if schedulerValue.lower() == 'day':
+                if schedulerTime != '':
+                    # Send a message every day at the time set in schedulerTime
+                    schedule.every().day.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+                else:
+                    # Send a message every day at the time set in schedulerInterval
+                    schedule.every(int(schedulerInterval)).days.do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'mon' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Monday at the time set in schedulerTime
+                schedule.every().monday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'tue' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Tuesday at the time set in schedulerTime
+                schedule.every().tuesday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'wed' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Wednesday at the time set in schedulerTime
+                schedule.every().wednesday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'thu' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Thursday at the time set in schedulerTime
+                schedule.every().thursday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'fri' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Friday at the time set in schedulerTime
+                schedule.every().friday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'sat' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Saturday at the time set in schedulerTime
+                schedule.every().saturday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'sun' in schedulerValue.lower() and schedulerTime != '':
+                # Send a message every Sunday at the time set in schedulerTime
+                schedule.every().sunday.at(schedulerTime).do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'hour' in schedulerValue.lower():
+                # Send a message every hour at the time set in schedulerTime
+                schedule.every(int(schedulerInterval)).hours.do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+            elif 'min' in schedulerValue.lower():
+                # Send a message every minute at the time set in schedulerTime
+                schedule.every(int(schedulerInterval)).minutes.do(lambda: send_message(schedulerMessage, schedulerChannel, 0, schedulerInterface))
+        else:
+            logger.debug(f"System: Starting the broadcast scheduler")
+
+        # Enhanced Examples of using the scheduler, Times here are in 24hr format
+        # https://schedule.readthedocs.io/en/stable/

        # Good Morning Every day at 09:00 using send_message function to channel 2 on device 1
        #schedule.every().day.at("09:00").do(lambda: send_message("Good Morning", 2, 0, 1))
@@ -1483,8 +1536,6 @@ async def start_rx():

        # Send bbslink looking for peers every other day at 10:00 using send_message function to channel 3 on device 1
        #schedule.every(2).days.at("10:00").do(lambda: send_message("bbslink MeshBot looking for peers", 3, 0, 1))
-        
-        logger.debug("System: Starting the broadcast scheduler")
        await BroadcastScheduler()

    # here we go loopty loo
@@ -1509,10 +1560,11 @@ async def main():

    await asyncio.sleep(0.01)

-try:
-    if __name__ == "__main__":
+if __name__ == "__main__":
+    try:
        asyncio.run(main())
-except KeyboardInterrupt:
-    exit_handler()
-    pass
+    except KeyboardInterrupt:
+        exit_handler()
+    except SystemExit:
+        pass
 # EOF
--- a/modules/README.md
+++ b/modules/README.md
@@ -39,4 +39,16 @@ To help with code testing see `etc/simulator.py` to simulate a bot. I also enjoy
    ```

 5. **Test the New Command**:
-   Run MeshBot and test the new command by sending a message with the command `newcommand` to ensure it responds correctly.
+   Run MeshBot and test the new command by sending a message with the command `newcommand` to ensure it responds correctly.
+
+
+### Running a Shell command
+
+Using the above example and enabling the filemon module, you can make a command which calls a bash file to do things on the system.
+
+```python
+def auto_response(message, snr, rssi, hop, pkiStatus, message_from_id, channel_number, deviceID, isDM):
+    #...
+    "switchON": lambda: call_external_script(message)
+```
+This would call the default script located in script/runShell.sh and return its output.
--- a/modules/filemon.py
+++ b/modules/filemon.py
@@ -31,7 +31,7 @@ def read_file(file_monitor_file_path, random_line_only=False):
    
 def read_news():
    # read the news file on demand
-    return read_file(news_file_path, read_news_enabled)
+    return read_file(news_file_path, news_random_line_only)


 def write_news(content, append=False):
--- a/modules/games/videopoker.py
+++ b/modules/games/videopoker.py
@@ -164,7 +164,7 @@ class PlayerVP:
                return self.show_hand()    
            except Exception as e:
                pass
-    
+
        return "ex:1,3,4 deals them new, and keeps 2,5 or (N)o to keep current (H)and"

    # Method for scoring hand, calculating winnings, and outputting message
@@ -390,7 +390,7 @@ def playVideoPoker(nodeID, message):
        else:
            if drawCount <= 1:
                msg = player.redraw(deck, message)
-                if msg.startswith("Send Card"):
+                if msg.startswith("ex:"):
                    # if returned error message, return it
                    return msg
                drawCount += 1
@@ -403,7 +403,7 @@ def playVideoPoker(nodeID, message):
                if drawCount == 2:
                    # this is the last draw will carry on to endGame for scoring
                    msg = player.redraw(deck, message) + f"\n"
-                    if msg.startswith("Send Card"):
+                    if msg.startswith("ex:"):
                        # if returned error message, return it
                        return msg
                    # redraw done
--- a/modules/llm.py
+++ b/modules/llm.py
@@ -146,6 +146,12 @@ def llm_query(input, nodeID=0, location_name=None):
    googleResults = []
    if not location_name:
        location_name = "no location provided "
+    
+    # remove askai: and ask: from the input
+    for trap in trap_list_llm:
+        if input.lower().startswith(trap):
+            input = input[len(trap):].strip()
+            break

    # add the naughty list here to stop the function before we continue
    # add a list of allowed nodes only to use the function
--- a/modules/locationdata.py
+++ b/modules/locationdata.py
@@ -9,7 +9,7 @@ import bs4 as bs # pip install beautifulsoup4
 import xml.dom.minidom 
 from modules.log import *

-trap_list_location = ("whereami", "tide", "wx", "wxc", "wxa", "wxalert", "rlist", "ea", "ealert", "riverflow","valert")
+trap_list_location = ("whereami", "wx", "wxa", "wxalert", "rlist", "ea", "ealert", "riverflow", "valert")

 def where_am_i(lat=0, lon=0, short=False, zip=False):
    whereIam = ""
@@ -397,6 +397,12 @@ def alertBrodcastNOAA():
    elif currentAlert == NO_ALERTS:
        wxAlertCacheNOAA = ""
        return False
+    if ignoreEASenable:
+        # check if the alert is in the ignoreEAS list
+        for word in ignoreEASwords:
+            if word.lower() in currentAlert[0].lower():
+                logger.debug(f"Location:Ignoring NOAA Alert: {currentAlert[0]} containing {word}")
+                return False
    # broadcast the alerts send to wxBrodcastCh
    elif currentAlert[0] not in wxAlertCacheNOAA:
        # Check if the current alert is not in the weather alert cache
@@ -447,7 +453,7 @@ def getActiveWeatherAlertsDetailNOAA(lat=0, lon=0):
    alerts = alerts.split("\n***\n")[:numWxAlerts]
    
    if alerts == "" or alerts == ['']:
-        return ERROR_FETCHING_DATA
+        return NO_ALERTS

    # trim off last newline
    if alerts[-1] == "\n":
@@ -461,12 +467,11 @@ def getIpawsAlert(lat=0, lon=0, shortAlerts = False):
    # get the latest IPAWS alert from FEMA
    alert = ''
    alerts = []
+    linked_data = ''
    
    # set the API URL for IPAWS
    namespace = "urn:oasis:names:tc:emergency:cap:1.2"
    alert_url = "https://apps.fema.gov/IPAWSOPEN_EAS_SERVICE/rest/feed"
-    if ipawsPIN != "000000":
-        alert_url += "?pin=" + ipawsPIN

    # get the alerts from FEMA
    try:
@@ -484,23 +489,49 @@ def getIpawsAlert(lat=0, lon=0, shortAlerts = False):
    # extract alerts from main feed
    for entry in alertxml.getElementsByTagName("entry"):
        link = entry.getElementsByTagName("link")[0].getAttribute("href")
+
+        ## state FIPS
+        ## This logic is being added to reduce load on FEMA server.
+        stateFips = None
+        for cat in entry.getElementsByTagName("category"):
+            if cat.getAttribute("label") == "statefips":
+                stateFips = cat.getAttribute("term")
+                break
+
+        if stateFips is None:
+            # no stateFIPS found — skip
+            continue
+
+        # check if it matches your list
+        if stateFips not in myStateFIPSList:
+            #logger.debug(f"Skipping FEMA record link {link} with stateFIPS code of: {stateFips} because it doesn't match our StateFIPSList {myStateFIPSList}")
+            continue  # skip to next entry
+
        try:
-            #pin check
-            if ipawsPIN != "000000":
-                link += "?pin=" + ipawsPIN
            # get the linked alert data from FEMA
            linked_data = requests.get(link, timeout=urlTimeoutSeconds)
-            if not linked_data.ok:
+            if not linked_data.ok or not linked_data.text.strip():
+                # if the linked data is not ok, skip this alert
                #logger.warning(f"System: iPAWS Error fetching linked alert data from {link}")
                continue
+            else:
+                linked_xml = xml.dom.minidom.parseString(linked_data.text)
+                # this alert is a full CAP alert
        except (requests.exceptions.RequestException):
            logger.warning(f"System: iPAWS Error fetching embedded alert data from {link}")
            continue
-        
-        # this alert is a full CAP alert
-        linked_xml = xml.dom.minidom.parseString(linked_data.text)
+        except xml.parsers.expat.ExpatError:
+            logger.warning(f"System: iPAWS Error parsing XML from {link}")
+            continue
+        except Exception as e:
+            logger.debug(f"System: iPAWS Error processing alert data from {link}: {e}")
+            continue

        for info in linked_xml.getElementsByTagName("info"):
+            # only get en-US language alerts (alternative is es-US)
+            language_nodes = info.getElementsByTagName("language")
+            if not any(node.firstChild and node.firstChild.nodeValue.strip() == "en-US" for node in language_nodes):
+                    continue  # skip if not en-US
            # extract values from XML
            sameVal = "NONE"
            geocode_value = "NONE"
@@ -518,27 +549,31 @@ def getIpawsAlert(lat=0, lon=0, shortAlerts = False):

                area_table = info.getElementsByTagName("area")[0]
                areaDesc = area_table.getElementsByTagName("areaDesc")[0].childNodes[0].nodeValue
-                
                geocode_table = area_table.getElementsByTagName("geocode")[0]
                geocode_type = geocode_table.getElementsByTagName("valueName")[0].childNodes[0].nodeValue
                geocode_value = geocode_table.getElementsByTagName("value")[0].childNodes[0].nodeValue
                if geocode_type == "SAME":
                    sameVal = geocode_value
+                
            except Exception as e:
                logger.debug(f"System: iPAWS Error extracting alert data: {link}")
                #print(f"DEBUG: {info.toprettyxml()}")
                continue

-            # check if the alert is for the current location, if wanted keep alert
-            if (sameVal in mySAME) or (geocode_value in mySAME):
+             # check if the alert is for the SAME location, if wanted keep alert
+            if (sameVal in mySAMEList) or (geocode_value in mySAMEList) or mySAMEList == ['']:
                # ignore the FEMA test alerts
                if ignoreFEMAenable:
+                    ignore_alert = False
                    for word in ignoreFEMAwords:
                        if word.lower() in headline.lower():
-                            logger.debug(f"System: Ignoring FEMA Alert: {headline} containing {word} at {areaDesc}")
-                            continue
+                            logger.debug(f"System: Filtering FEMA Alert by WORD: {headline} containing {word} at {areaDesc}")
+                            ignore_alert = True
+                            break
+                if ignore_alert:
+                    continue

-                # add to alerts list
+                # add to alert list
                alerts.append({
                    'alertType': alertType,
                    'alertCode': alertCode,
@@ -548,10 +583,10 @@ def getIpawsAlert(lat=0, lon=0, shortAlerts = False):
                    'geocode_value': geocode_value,
                    'description': description
                })
-            # else:
-            #     # these are discarded some day but logged for debugging currently
-            #     logger.debug(f"Debug iPAWS: Type:{alertType} Code:{alertCode} Desc:{areaDesc} GeoType:{geocode_type} GeoVal:{geocode_value}, Headline:{headline}")
-    
+            else:
+                logger.debug(f"System: iPAWS Alert not in SAME List: {sameVal} or {geocode_value} for {headline} at {areaDesc}")
+                continue
+
    # return the numWxAlerts of alerts
    if len(alerts) > 0:
        for alertItem in alerts[:numWxAlerts]:
@@ -626,26 +661,36 @@ def get_volcano_usgs(lat=0, lon=0):
    try:
        volcano_data = requests.get(usgs_volcano_url, timeout=urlTimeoutSeconds)
        if not volcano_data.ok:
-            logger.warning("System: USGS fetching volcano alerts from USGS")
+            logger.warning("System: Issue with fetching volcano alerts from USGS")
            return ERROR_FETCHING_DATA
    except (requests.exceptions.RequestException):
-        logger.warning("System: USGS fetching volcano alerts from USGS")
+        logger.warning("System: Issue with fetching volcano alerts from USGS")
        return ERROR_FETCHING_DATA
    volcano_json = volcano_data.json()
    # extract alerts from main feed
-    for alert in volcano_json:
-        # check if the alert lat long is within the range of bot latitudeValue and longitudeValue
-        if (alert['latitude'] >= latitudeValue - 10 and alert['latitude'] <= latitudeValue + 10) and (alert['longitude'] >= longitudeValue - 10 and alert['longitude'] <= longitudeValue + 10):
-            volcano_name = alert['volcano_name_appended']
-            alert_level = alert['alert_level']
-            color_code = alert['color_code']
-            cap_severity = alert['cap_severity']
-            synopsis = alert['synopsis']
-            # format Alert
-            alerts += f"🌋🚨: {volcano_name}, {alert_level} {color_code}, {cap_severity}.\n{synopsis}\n"
-        else:
-            #logger.debug(f"System: USGS volcano alert not in range: {alert['volcano_name_appended']}")
-            continue
+    if volcano_json and isinstance(volcano_json, list):
+        for alert in volcano_json:
+            # check ignore list
+            if ignoreUSGSEnable:
+                for word in ignoreUSGSwords:
+                    if word.lower() in alert['volcano_name_appended'].lower():
+                        logger.debug(f"System: Ignoring USGS Alert: {alert['volcano_name_appended']} containing {word}")
+                        continue
+            # check if the alert lat long is within the range of bot latitudeValue and longitudeValue
+            if (alert['latitude'] >= latitudeValue - 10 and alert['latitude'] <= latitudeValue + 10) and (alert['longitude'] >= longitudeValue - 10 and alert['longitude'] <= longitudeValue + 10):
+                volcano_name = alert['volcano_name_appended']
+                alert_level = alert['alert_level']
+                color_code = alert['color_code']
+                cap_severity = alert['cap_severity']
+                synopsis = alert['synopsis']
+                # format Alert
+                alerts += f"🌋🚨: {volcano_name}, {alert_level} {color_code}, {cap_severity}.\n{synopsis}\n"
+            else:
+                #logger.debug(f"System: USGS volcano alert not in range: {alert['volcano_name_appended']}")
+                continue
+    else:
+        logger.debug("Location:Error fetching volcano data from USGS")
+        return NO_ALERTS
    if alerts == "":
        return NO_ALERTS
    # trim off last newline
@@ -655,4 +700,60 @@ def get_volcano_usgs(lat=0, lon=0):
    alerts = abbreviate_noaa(alerts)
    return alerts

+def get_nws_marine(zone, days=3):
+    # forcast from NWS coastal products
+    try:
+        marine_pzz_data = requests.get(zone, timeout=urlTimeoutSeconds)
+        if not marine_pzz_data.ok:
+            logger.warning("Location:Error fetching NWS Marine PZ data")
+            return ERROR_FETCHING_DATA
+    except (requests.exceptions.RequestException):
+        logger.warning("Location:Error fetching NWS Marine PZ data")
+        return ERROR_FETCHING_DATA
+    
+    marine_pzz_data = marine_pzz_data.text
+    #validate data
+    todayDate = today.strftime("%Y%m%d")
+    if marine_pzz_data.startswith("Expires:"):
+        expires = marine_pzz_data.split(";;")[0].split(":")[1]
+        expires_date = expires[:8]
+        if expires_date < todayDate:
+            logger.debug("Location: NWS Marine PZ data expired")
+            return ERROR_FETCHING_DATA
+    else:
+        logger.debug("Location: NWS Marine PZ data not valid")
+        return ERROR_FETCHING_DATA
+    
+    # process the marine forecast data
+    marine_pzz_lines = marine_pzz_data.split("\n")
+    marine_pzz_report = ""
+    day_blocks = []
+    current_block = ""
+    in_forecast = False
+
+    for line in marine_pzz_lines:
+        if line.startswith(".") and "..." in line:
+            in_forecast = True
+            if current_block:
+                day_blocks.append(current_block.strip())
+                current_block = ""
+            current_block += line.strip() + " "
+        elif in_forecast and line.strip() != "":
+            current_block += line.strip() + " "
+    if current_block:
+        day_blocks.append(current_block.strip())
+
+    # Only keep up to pzzDays blocks
+    for block in day_blocks[:days]:
+        marine_pzz_report += block + "\n"
+
+    # remove last newline
+    if marine_pzz_report.endswith("\n"):
+        marine_pzz_report = marine_pzz_report[:-1]
+
+    # abbreviate the report
+    marine_pzz_report = abbreviate_noaa(marine_pzz_report)
+    if marine_pzz_report == "":
+        return NO_DATA_NOGPS
+    return marine_pzz_report

--- a/modules/log.py
+++ b/modules/log.py
@@ -83,18 +83,14 @@ if log_messages_to_file:

 # Pretty Timestamp
 def getPrettyTime(seconds):
-    # convert unix time to minutes, hours, or days, or years for simple display
-    designator = "s"
-    if seconds > 0:
-        seconds = round(seconds / 60)
-        designator = "m"
-    if seconds > 60:
-        seconds = round(seconds / 60)
-        designator = "h"
-    if seconds > 24:
-        seconds = round(seconds / 24)
-        designator = "d"
-    if seconds > 365:
-        seconds = round(seconds / 365)
-        designator = "y"
-    return str(seconds) + designator
+    # convert unix time to minutes, hours, days, or years for simple display
+    if seconds < 60:
+        return f"{int(seconds)}s"
+    elif seconds < 3600:
+        return f"{int(round(seconds / 60))}m"
+    elif seconds < 86400:
+        return f"{int(round(seconds / 3600))}h"
+    elif seconds < 31536000:
+        return f"{int(round(seconds / 86400))}d"
+    else:
+        return f"{int(round(seconds / 31536000))}y"
--- a/modules/settings.py
+++ b/modules/settings.py
@@ -21,8 +21,7 @@ ping_enabled = True # ping feature to respond to pings, ack's etc.
 sitrep_enabled = True # sitrep feature to respond to sitreps
 lastHamLibAlert = 0 # last alert from hamlib
 lastFileAlert = 0 # last alert from file monitor
-max_retry_count1 = 4 # max retry count for interface 1
-max_retry_count2 = 4 # max retry count for interface 2
+max_retry_count1 = max_retry_count2 = max_retry_count3 = max_retry_count4 = max_retry_count5 = max_retry_count6 = max_retry_count7 = max_retry_count8 = max_retry_count9 = 4 # default retry count for interfaces
 retry_int1 = False
 retry_int2 = False
 wiki_return_limit = 3 # limit the number of sentences returned off the first paragraph first hit
@@ -222,6 +221,8 @@ try:
    llm_enabled = config['general'].getboolean('ollama', False) # https://ollama.com
    llmModel = config['general'].get('ollamaModel', 'gemma2:2b') # default gemma2:2b
    ollamaHostName = config['general'].get('ollamaHostName', 'http://localhost:11434') # default localhost
+    llmReplyToNonCommands = config['general'].getboolean('llmReplyToNonCommands', True)
+    dont_retry_disconnect = config['general'].getboolean('dont_retry_disconnect', False) # default False, retry on disconnect
    # emergency response
    emergency_responder_enabled = config['emergencyHandler'].getboolean('enabled', False)
    emergency_responder_alert_channel = config['emergencyHandler'].getint('alert_channel', 2) # default 2
@@ -235,6 +236,10 @@ try:
    sentryIgnoreList = config['sentry'].get('sentryIgnoreList', '').split(',')
    sentry_radius = config['sentry'].getint('SentryRadius', 100) # default 100 meters
    email_sentry_alerts = config['sentry'].getboolean('emailSentryAlerts', False) # default False
+    highfly_enabled = config['sentry'].getboolean('highFlyingAlert', True) # default True
+    highfly_altitude = config['sentry'].getint('highFlyingAlertAltitude', 2000) # default 2000 meters
+    highfly_channel = config['sentry'].getint('highFlyingAlertChannel', 2) # default 2
+    highfly_ignoreList = config['sentry'].get('highFlyingIgnoreList', '').split(',') # default empty

    # location
    location_enabled = config['location'].getboolean('enabled', True)
@@ -246,24 +251,32 @@ try:
    n2yoAPIKey = config['location'].get('n2yoAPIKey', '') # default empty
    satListConfig = config['location'].get('satList', '25544').split(',') # default 25544 ISS
    riverListDefault = config['location'].get('riverList', '').split(',') # default 12061500 Skagit River
+    coastalEnabled = config['location'].getboolean('coastalEnabled', False) # default False
+    myCoastalZone = config['location'].get('myCoastalZone', None) # default None
+    coastalForecastDays = config['location'].getint('coastalForecastDays', 3) # default 3 days
+
    # location alerts
    emergencyAlertBrodcastEnabled = config['location'].getboolean('eAlertBroadcastEnabled', False) # default False
    wxAlertBroadcastEnabled = config['location'].getboolean('wxAlertBroadcastEnabled', False) # default False
    enableGBalerts = config['location'].getboolean('enableGBalerts', False) # default False
    enableDEalerts = config['location'].getboolean('enableDEalerts', False) # default False
    wxAlertsEnabled = config['location'].getboolean('NOAAalertsEnabled', True) # default True
-    mySAME = config['location'].get('mySAME', '').split(',') # default empty
+    ignoreEASenable = config['location'].getboolean('ignoreEASenable', False) # default False
+    ignoreEASwords = config['location'].get('ignoreEASwords', 'test,advisory').split(',') # default test,advisory
    myRegionalKeysDE = config['location'].get('myRegionalKeysDE', '110000000000').split(',') # default city Berlin
    forecastDuration = config['location'].getint('NOAAforecastDuration', 4) # NOAA forcast days
    numWxAlerts = config['location'].getint('NOAAalertCount', 2) # default 2 alerts
    enableExtraLocationWx = config['location'].getboolean('enableExtraLocationWx', False) # default False
-    ipawsPIN = config['location'].get('ipawsPIN', '000000') # default 000000
+    myStateFIPSList = config['location'].get('myFIPSList', '').split(',') # default empty
+    mySAMEList = config['location'].get('mySAMEList', '').split(',') # default empty
    ignoreFEMAenable = config['location'].getboolean('ignoreFEMAenable', True) # default True
    ignoreFEMAwords = config['location'].get('ignoreFEMAwords', 'test,exercise').split(',') # default test,exercise
    wxAlertBroadcastChannel = config['location'].get('wxAlertBroadcastCh', '2').split(',') # default Channel 2
    emergencyAlertBroadcastCh = config['location'].get('eAlertBroadcastCh', '2').split(',') # default Channel 2
    volcanoAlertBroadcastEnabled = config['location'].getboolean('volcanoAlertBroadcastEnabled', False) # default False
    volcanoAlertBroadcastChannel = config['location'].get('volcanoAlertBroadcastCh', '2').split(',') # default Channel 2
+    ignoreUSGSEnable = config['location'].getboolean('ignoreVolcanoEnable', False) # default False
+    ignoreUSGSWords = config['location'].get('ignoreVolcanoWords', 'test,advisory').split(',') # default test,advisory
    
    # bbs
    bbs_enabled = config['bbs'].getboolean('enabled', False)
@@ -281,7 +294,7 @@ try:
    # qrz hello
    qrz_hello_enabled = config['qrz'].getboolean('enabled', False)
    qrz_db = config['qrz'].get('qrz_db', 'data/qrz.db')
-    qrz_hello_string = config['qrz'].get('qrz_hello_string', 'send CMD or DM me for more info.')
+    qrz_hello_string = config['qrz'].get('qrz_hello_string', 'MeshBot says Hello! DM for more info.')
    train_qrz = config['qrz'].getboolean('training', True)
    
    # E-Mail Settings
@@ -307,6 +320,12 @@ try:

    # scheduler
    scheduler_enabled = config['scheduler'].getboolean('enabled', False)
+    schedulerInterface = config['scheduler'].getint('interface', 1) # default interface 1
+    schedulerChannel = config['scheduler'].getint('channel', 2) # default channel 2
+    schedulerMessage = config['scheduler'].get('message', 'Scheduled message') # default message
+    schedulerInterval = config['scheduler'].get('interval', '') # default empty
+    schedulerTime = config['scheduler'].get('time', '') # default empty
+    schedulerValue = config['scheduler'].get('value', '') # default empty

    # radio monitoring
    radio_detection_enabled = config['radioMon'].getboolean('enabled', False)
@@ -320,7 +339,7 @@ try:
    # file monitor
    file_monitor_enabled = config['fileMon'].getboolean('filemon_enabled', False)
    file_monitor_file_path = config['fileMon'].get('file_path', 'alert.txt') # default alert.txt
-    file_monitor_broadcastCh = config['fileMon'].getint('broadcastCh', 2) # default 2
+    file_monitor_broadcastCh = config['fileMon'].get('broadcastCh', '2').split(',') # default Channel 2
    read_news_enabled = config['fileMon'].getboolean('enable_read_news', False) # default disabled
    news_file_path = config['fileMon'].get('news_file_path', 'news.txt') # default news.txt
    news_random_line_only = config['fileMon'].getboolean('news_random_line', False) # default False
@@ -343,6 +362,7 @@ try:
    MESSAGE_CHUNK_SIZE = config['messagingSettings'].getint('MESSAGE_CHUNK_SIZE', 160) # default 160
    wantAck = config['messagingSettings'].getboolean('wantAck', False) # default False
    maxBuffer = config['messagingSettings'].getint('maxBuffer', 220) # default 220
+    enableHopLogs = config['messagingSettings'].getboolean('enableHopLogs', False) # default False

 except KeyError as e:
    print(f"System: Error reading config file: {e}")
--- a/modules/system.py
+++ b/modules/system.py
@@ -18,6 +18,7 @@ help_message = "Bot CMD?:"
 asyncLoop = asyncio.new_event_loop()
 games_enabled = False
 multiPingList = [{'message_from_id': 0, 'count': 0, 'type': '', 'deviceID': 0, 'channel_number': 0, 'startCount': 0}]
+interface_retry_count = 3

 # Ping Configuration
 if ping_enabled:
@@ -69,12 +70,12 @@ else:
 if enableCmdHistory:
    trap_list = trap_list + ("history",)
    #help_message = help_message + ", history"
-
+    
 # Location Configuration
 if location_enabled:
    from modules.locationdata import * # from the spudgunman/meshing-around repo
-    trap_list = trap_list + trap_list_location # items tide, whereami, wxc, wx
-    help_message = help_message + ", whereami, wx, wxc, rlist"
+    trap_list = trap_list + trap_list_location
+    help_message = help_message + ", whereami, wx"
    if enableGBalerts and not enableDEalerts:
        from modules.globalalert import * # from the spudgunman/meshing-around repo
        logger.warning(f"System: GB Alerts not functional at this time need to find a source API")
@@ -86,17 +87,25 @@ if location_enabled:
    
    # Open-Meteo Configuration for worldwide weather
    if use_meteo_wxApi:
+        trap_list = trap_list + ("wxc",)
+        help_message = help_message + ", wxc"
        from modules.wx_meteo import * # from the spudgunman/meshing-around repo
    else:
        # NOAA only features
-        help_message = help_message + ", wxa, tide"
+        help_message = help_message + ", wxa"

 # NOAA alerts needs location module
 if wxAlertBroadcastEnabled or emergencyAlertBrodcastEnabled or volcanoAlertBroadcastEnabled:
    from modules.locationdata import * # from the spudgunman/meshing-around repo
    # limited subset, this should be done better but eh..
-    trap_list = trap_list + ("wx", "wxc", "wxa", "wxalert", "ea", "ealert", "valert")
+    trap_list = trap_list + ("wx", "wxa", "wxalert", "ea", "ealert", "valert")
    help_message = help_message + ", wxalert, ealert, valert"
+
+# NOAA Coastal Waters Forecasts
+if coastalEnabled:
+    from modules.locationdata import * # from the spudgunman/meshing-around repo
+    trap_list = trap_list + ("mwx","tide",)
+    help_message = help_message + ", mwx, tide"
        
 # BBS Configuration
 if bbs_enabled:
@@ -255,6 +264,7 @@ if ble_count > 1:
 logger.debug(f"System: Initializing Interfaces")
 interface1 = interface2 = interface3 = interface4 = interface5 = interface6 = interface7 = interface8 = interface9 = None
 retry_int1 = retry_int2 = retry_int3 = retry_int4 = retry_int5 = retry_int6 = retry_int7 = retry_int8 = retry_int9 = False
+max_retry_count1 = max_retry_count2 = max_retry_count3 = max_retry_count4 = max_retry_count5 = max_retry_count6 = max_retry_count7 = max_retry_count8 = max_retry_count9 = interface_retry_count
 for i in range(1, 10):
    interface_type = globals().get(f'interface{i}_type')
    if not interface_type or interface_type == 'none' or globals().get(f'interface{i}_enabled') == False:
@@ -384,27 +394,27 @@ def get_node_list(nodeInt=1):
    
    return node_list

-def get_node_location(number, nodeInt=1, channel=0):
+def get_node_location(nodeID, nodeInt=1, channel=0):
    interface = globals()[f'interface{nodeInt}']
    # Get the location of a node by its number from nodeDB on device
+    # if no location data, return default location
    latitude = latitudeValue
    longitude = longitudeValue
    position = [latitudeValue,longitudeValue]
-    lastheard = 0
    if interface.nodes:
        for node in interface.nodes.values():
-            if number == node['num']:
-                if 'position' in node:
+            if nodeID == node['num']:
+                if 'position' in node and node['position'] is not {}:
                    try:
                        latitude = node['position']['latitude']
                        longitude = node['position']['longitude']
+                        logger.debug(f"System: location data for {nodeID} is {latitude},{longitude}")
+                        position = [latitude,longitude]
                    except Exception as e:
-                        logger.warning(f"System: Error getting location data for {number}")
-                    logger.debug(f"System: location data for {number} is {latitude},{longitude}")
-                    position = [latitude,longitude]
+                        logger.debug(f"System: No location data for {nodeID} use default location")
                    return position
                else:
-                    logger.warning(f"System: No location data for {number} using default location")
+                    logger.debug(f"System: No location data for {nodeID} using default location")
                    # request location data
                    # try:
                    #     logger.debug(f"System: Requesting location data for {number}")
@@ -413,7 +423,7 @@ def get_node_location(number, nodeInt=1, channel=0):
                    #     logger.error(f"System: Error requesting location data for {number}. Error: {e}")
                    return position
        else:
-            logger.warning(f"System: No nodes found")
+            logger.warning(f"System: Location for NodeID {nodeID} not found in nodeDb")
            return position


@@ -540,6 +550,15 @@ def messageChunker(message):
                if current_chunk:
                    message_list.append(current_chunk)

+        # Consolidate any adjacent messages that can fit in a single chunk.
+        idx = 0
+        while idx < len(message_list) - 1:
+            if len(message_list[idx]) + len(message_list[idx+1]) < MESSAGE_CHUNK_SIZE:
+                message_list[idx] += '\n' + message_list[idx+1]
+                del message_list[idx+1]
+            else:
+                idx += 1
+
        # Ensure no chunk exceeds MESSAGE_CHUNK_SIZE
        final_message_list = []
        for chunk in message_list:
@@ -779,7 +798,7 @@ def handleAlertBroadcast(deviceID=1):
                send_message(ukAlert, emergencyAlertBroadcastCh, 0, deviceID)
            return True

-        if NO_ALERTS not in deAlert:
+        if NO_ALERTS not in alertDe:
            if isinstance(emergencyAlertBroadcastCh, list):
                for channel in emergencyAlertBroadcastCh:
                    send_message(ukAlert, int(channel), 0, deviceID)
@@ -804,7 +823,7 @@ def handleAlertBroadcast(deviceID=1):

    if volcanoAlertBroadcastEnabled:
        volcanoAlert = get_volcano_usgs(latitudeValue, longitudeValue)
-        if volcanoAlert and volcanoAlert != NO_ALERTS and volcanoAlert != ERROR_FETCHING_DATA:
+        if volcanoAlert and NO_ALERTS not in volcanoAlert and ERROR_FETCHING_DATA not in volcanoAlert:
            # check if the alert is different from the last one
            if volcanoAlert != priorVolcanoAlert:
                priorVolcanoAlert = volcanoAlert
@@ -816,40 +835,9 @@ def handleAlertBroadcast(deviceID=1):
                return True

 def onDisconnect(interface):
-    global retry_int1, retry_int2, retry_int3, retry_int4, retry_int5, retry_int6, retry_int7, retry_int8, retry_int9
-    rxType = type(interface).__name__
-    if rxType in ['SerialInterface', 'TCPInterface', 'BLEInterface']:
-        identifier = interface.__dict__.get('devPath', interface.__dict__.get('hostname', 'BLE'))
-        logger.critical(f"System: Lost Connection to Device {identifier}")
-        for i in range(1, 10):
-            if globals().get(f'interface{i}_enabled'):
-                if (rxType == 'SerialInterface' and globals().get(f'port{i}') in identifier) or \
-                   (rxType == 'TCPInterface' and globals().get(f'hostname{i}') in identifier) or \
-                   (rxType == 'BLEInterface' and globals().get(f'interface{i}_type') == 'ble'):
-                    globals()[f'retry_int{i}'] = True
-                    break
-
-def exit_handler():
-    # Close the interface and save the BBS messages
-    logger.debug(f"System: Closing Autoresponder")
-    try:
-        logger.debug(f"System: Closing Interface1")
-        interface1.close()
-        if multiple_interface:
-            for i in range(2, 10):
-                if globals().get(f'interface{i}_enabled'):
-                    logger.debug(f"System: Closing Interface{i}")
-                    globals()[f'interface{i}'].close()
-    except Exception as e:
-        logger.error(f"System: closing: {e}")
-    if bbs_enabled:
-        save_bbsdb()
-        save_bbsdm()
-        logger.debug(f"System: BBS Messages Saved")
-    logger.debug(f"System: Exiting")
-    asyncLoop.stop()
-    asyncLoop.close()
-    exit (0)
+    # Handle disconnection of the interface
+    logger.warning(f"System: Abrupt Disconnection of Interface detected")
+    interface.close()

 # Telemetry Functions
 telemetryData = {}
@@ -978,8 +966,15 @@ def consumeMetadata(packet, rxNode=0):
        
                for key in keys:
                    positionMetadata[nodeID][key] = position_data.get(key, 0)
+
+                # if altitude is over 2000 send a log and message for high-flying nodes and not in highfly_ignoreList
+                if position_data.get('altitude', 0) > highfly_altitude and highfly_enabled and str(nodeID) not in highfly_ignoreList:
+                    logger.info(f"System: High Altitude {position_data['altitude']}m on Device: {rxNode} NodeID: {nodeID}")
+                    altFeet = round(position_data['altitude'] * 3.28084, 2)
+                    send_message(f"High Altitude {altFeet}ft ({position_data['altitude']}m) on Device:{rxNode} Node:{get_name_from_number(nodeID,'short',rxNode)}", highfly_channel, 0, rxNode)
+                    time.sleep(responseDelay)
        
-                # Keep the positionMetadata dictionary at 5 records
+                # Keep the positionMetadata dictionary at a maximum size of 20
                if len(positionMetadata) > 20:
                    # Remove the oldest entry
                    oldest_nodeID = next(iter(positionMetadata))
@@ -1096,7 +1091,7 @@ async def handleFileWatcher():
                # if fileWatchBroadcastCh list contains multiple channels, broadcast to all
                if type(file_monitor_broadcastCh) is list:
                    for ch in file_monitor_broadcastCh:
-                        if antiSpam and ch != publicChannel:
+                        if antiSpam and int(ch) != publicChannel:
                            send_message(msg, int(ch), 0, 1)
                            time.sleep(responseDelay)
                            if multiple_interface:
@@ -1122,21 +1117,26 @@ async def handleFileWatcher():
        pass

 async def retry_interface(nodeID):
-    global max_retry_count
+    global retry_int1, retry_int2, retry_int3, retry_int4, retry_int5, retry_int6, retry_int7, retry_int8, retry_int9
+    global max_retry_count1, max_retry_count2, max_retry_count3, max_retry_count4, max_retry_count5, max_retry_count6, max_retry_count7, max_retry_count8, max_retry_count9
    interface = globals()[f'interface{nodeID}']
    retry_int = globals()[f'retry_int{nodeID}']
-    max_retry_count = globals()[f'max_retry_count{nodeID}']
+
+    if dont_retry_disconnect:
+        logger.critical(f"System: dont_retry_disconnect is set, not retrying interface{nodeID}")
+        exit_handler()

    if interface is not None:
-        retry_int = True
-        max_retry_count -= 1
+        globals()[f'retry_int{nodeID}'] = True
+        globals()[f'max_retry_count{nodeID}'] -= 1
+        logger.debug(f"System: Retrying interface{nodeID} {globals()[f'max_retry_count{nodeID}']} attempts left")
        try:
            interface.close()
+            logger.debug(f"System: Retrying interface{nodeID} in 15 seconds")
        except Exception as e:
            logger.error(f"System: closing interface{nodeID}: {e}")

-    logger.debug(f"System: Retrying interface{nodeID} in 15 seconds")
-    if max_retry_count == 0:
+    if globals()[f'max_retry_count{nodeID}'] == 0:
        logger.critical(f"System: Max retry count reached for interface{nodeID}")
        exit_handler()

@@ -1146,15 +1146,19 @@ async def retry_interface(nodeID):
        if retry_int:
            interface = None
            globals()[f'interface{nodeID}'] = None
-            logger.debug(f"System: Retrying Interface{nodeID}")
            interface_type = globals()[f'interface{nodeID}_type']
            if interface_type == 'serial':
+                logger.debug(f"System: Retrying Interface{nodeID} Serial on port: {globals().get(f'port{nodeID}')}")
                globals()[f'interface{nodeID}'] = meshtastic.serial_interface.SerialInterface(globals().get(f'port{nodeID}'))
            elif interface_type == 'tcp':
+                logger.debug(f"System: Retrying Interface{nodeID} TCP on hostname: {globals().get(f'hostname{nodeID}')}")
                globals()[f'interface{nodeID}'] = meshtastic.tcp_interface.TCPInterface(globals().get(f'hostname{nodeID}'))
            elif interface_type == 'ble':
+                logger.debug(f"System: Retrying Interface{nodeID} BLE on mac: {globals().get(f'mac{nodeID}')}")
                globals()[f'interface{nodeID}'] = meshtastic.ble_interface.BLEInterface(globals().get(f'mac{nodeID}'))
            logger.debug(f"System: Interface{nodeID} Opened!")
+            # reset the retry_int and retry_count
+            globals()[f'max_retry_count{nodeID}'] = interface_retry_count
            globals()[f'retry_int{nodeID}'] = False
    except Exception as e:
        logger.error(f"System: Error Opening interface{nodeID} on: {e}")
@@ -1242,3 +1246,24 @@ async def watchdog():
                except Exception as e:
                    logger.error(f"System: retrying interface{i}: {e}")

+def exit_handler():
+    # Close the interface and save the BBS messages
+    logger.debug(f"System: Closing Autoresponder")
+    try:
+        logger.debug(f"System: Closing Interface1")
+        interface1.close()
+        if multiple_interface:
+            for i in range(2, 10):
+                if globals().get(f'interface{i}_enabled'):
+                    logger.debug(f"System: Closing Interface{i}")
+                    globals()[f'interface{i}'].close()
+    except Exception as e:
+        logger.error(f"System: closing: {e}")
+    if bbs_enabled:
+        save_bbsdb()
+        save_bbsdm()
+        logger.debug(f"System: BBS Messages Saved")
+    logger.debug(f"System: Exiting")
+    asyncLoop.stop()
+    asyncLoop.close()
+    exit (0)
--- a/modules/web.py
+++ b/modules/web.py
@@ -40,8 +40,8 @@ class QuietHandler(http.server.SimpleHTTPRequestHandler):
 # Change the current working directory to webRoot
 os.chdir(webRoot)

-# boot up simple HTTP server
-httpd = http.server.HTTPServer(('127.0.0.1', PORT), QuietHandler)
+# Create the HTTP server instance with the desired IP address
+httpd = http.server.HTTPServer((server_ip, PORT), QuietHandler)

 if SSL:
    ctx = ssl.create_default_context(ssl.Purpose.CLIENT_AUTH)
@@ -51,12 +51,9 @@ if SSL:
        print("SSL certificate file not found. Please generate it using the command provided in the comments.")
        exit(1)
    httpd.socket = ctx.wrap_socket(httpd.socket, server_side=True)
-
-# Create the HTTP server instance with the desired IP address
-httpd = http.server.HTTPServer((server_ip, PORT), QuietHandler)
-
-# Print out the URL using the IP address stored in server_ip
-print(f"Serving reports at http://{server_ip}:{PORT} Press ^C to quit.\n\n")
+    print(f"Serving reports at https://{server_ip}:{PORT} Press ^C to quit.\n\n")
+else:
+    print(f"Serving reports at http://{server_ip}:{PORT} Press ^C to quit.\n\n")

 if not webServerLogs:
    print("Server Logs are disabled")
--- a/pong_bot.py
+++ b/pong_bot.py
@@ -217,15 +217,15 @@ def onReceive(packet, interface):
    
    if rxType == 'TCPInterface':
        rxHost = interface.__dict__.get('hostname', 'unknown')
-        if hostname1 in rxHost and interface1_type == 'tcp': rxNode = 1
-        elif multiple_interface and hostname2 in rxHost and interface2_type == 'tcp': rxNode = 2
-        elif multiple_interface and hostname3 in rxHost and interface3_type == 'tcp': rxNode = 3
-        elif multiple_interface and hostname4 in rxHost and interface4_type == 'tcp': rxNode = 4
-        elif multiple_interface and hostname5 in rxHost and interface5_type == 'tcp': rxNode = 5
-        elif multiple_interface and hostname6 in rxHost and interface6_type == 'tcp': rxNode = 6
-        elif multiple_interface and hostname7 in rxHost and interface7_type == 'tcp': rxNode = 7
-        elif multiple_interface and hostname8 in rxHost and interface8_type == 'tcp': rxNode = 8
-        elif multiple_interface and hostname9 in rxHost and interface9_type == 'tcp': rxNode = 9
+        if rxHost and hostname1 in rxHost and interface1_type == 'tcp': rxNode = 1
+        elif multiple_interface and rxHost and hostname2 in rxHost and interface2_type == 'tcp': rxNode = 2
+        elif multiple_interface and rxHost and hostname3 in rxHost and interface3_type == 'tcp': rxNode = 3
+        elif multiple_interface and rxHost and hostname4 in rxHost and interface4_type == 'tcp': rxNode = 4
+        elif multiple_interface and rxHost and hostname5 in rxHost and interface5_type == 'tcp': rxNode = 5
+        elif multiple_interface and rxHost and hostname6 in rxHost and interface6_type == 'tcp': rxNode = 6
+        elif multiple_interface and rxHost and hostname7 in rxHost and interface7_type == 'tcp': rxNode = 7
+        elif multiple_interface and rxHost and hostname8 in rxHost and interface8_type == 'tcp': rxNode = 8
+        elif multiple_interface and rxHost and hostname9 in rxHost and interface9_type == 'tcp': rxNode = 9

    if rxType == 'BLEInterface':
        if interface1_type == 'ble': rxNode = 1
@@ -310,7 +310,7 @@ def onReceive(packet, interface):
                isDM = True
                # check if the message contains a trap word, DMs are always responded to
                if (messageTrap(message_string) and not llm_enabled) or messageTrap(message_string.split()[0]):
-                    # log the message to the message log
+                    # log the message to stdout
                    logger.info(f"Device:{rxNode} Channel: {channel_number} " + CustomFormatter.green + f"Received DM: " + CustomFormatter.white + f"{message_string} " + CustomFormatter.purple +\
                                "From: " + CustomFormatter.white + f"{get_name_from_number(message_from_id, 'long', rxNode)}")
                    # respond with DM
@@ -321,7 +321,8 @@ def onReceive(packet, interface):
                    time.sleep(responseDelay)
                    
                    # log the message to the message log
-                    msgLogger.info(f"Device:{rxNode} Channel:{channel_number} | {get_name_from_number(message_from_id, 'long', rxNode)} | " + message_string.replace('\n', '-nl-'))
+                    if log_messages_to_file:
+                        msgLogger.info(f"Device:{rxNode} Channel:{channel_number} | {get_name_from_number(message_from_id, 'long', rxNode)} | DM | " + message_string.replace('\n', '-nl-'))
            else:
                # message is on a channel
                if messageTrap(message_string):
@@ -443,10 +444,11 @@ async def main():

    await asyncio.sleep(0.01)

-try:
-    if __name__ == "__main__":
+if __name__ == "__main__":
+    try:
        asyncio.run(main())
-except KeyboardInterrupt:
-    exit_handler()
-    pass
+    except KeyboardInterrupt:
+        exit_handler()
+    except SystemExit:
+        pass
 # EOF
--- a/script/sysEnv.sh
+++ b/script/sysEnv.sh
@@ -24,4 +24,21 @@ else
 fi

 # print telemetry data rounded to 2 decimal places
-printf "Disk:%s RAM:%.2f%% CPU:%.2f%% CPU-T:%.2f°C (%.2f°F)\n" "$free_space" "$ram_usage" "$cpu_usage" "$temp" "$tempf"
+printf "Disk:%s RAM:%.2f%% CPU:%.2f%% CPU-T:%.2f°C (%.2f°F)\n" "$free_space" "$ram_usage" "$cpu_usage" "$temp" "$tempf"
+
+# attempt check for updates
+if command -v git &> /dev/null
+then
+    if [ -d ../.git ]; then
+        # check for updates
+        git fetch --quiet
+        local_branch=$(git rev-parse --abbrev-ref HEAD)
+        if [ "$local_branch" != "HEAD" ] && git show-ref --verify --quiet "refs/remotes/origin/$local_branch"; then
+            local_commit=$(git rev-parse "$local_branch")
+            remote_commit=$(git rev-parse "origin/$local_branch")
+            if [ "$local_commit" != "$remote_commit" ]; then
+                echo "Bot Update Available!"
+            fi
+        fi
+    fi
+fi
--- a/update.sh
+++ b/update.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+# MeshBot Update Script
+# Usage: bash update.sh or ./update.sh after making it executable with chmod +x update.sh
+
+# Check if the mesh_bot.service or pong_bot.service 
+if systemctl is-active --quiet mesh_bot.service; then
+    echo "Stopping mesh_bot.service..."
+    systemctl stop mesh_bot.service
+fi
+if systemctl is-active --quiet pong_bot.service; then
+    echo "Stopping pong_bot.service..."
+    systemctl stop pong_bot.service
+fi
+if systemctl is-active --quiet mesh_bot_reporting.service; then
+    echo "Stopping mesh_bot_reporting.service..."
+    systemctl stop mesh_bot_reporting.service
+fi
+if systemctl is-active --quiet mesh_bot_w3.service; then
+    echo "Stopping mesh_bot_w3.service..."
+    systemctl stop mesh_bot_w3.service
+fi
+
+# Update the local repository
+echo "Updating local repository..."
+#git fetch --all
+#git reset --hard origin/main    # Replace 'main' with your branch name if different
+git pull origin main --rebase  # Fetch and rebase to keep local changes if any
+echo "Local repository updated."
+
+# Install or update dependencies
+echo "Installing or updating dependencies..."
+pip install -r requirements.txt --upgrade
+
+echo "Dependencies installed or updated."
+
+# Restart the services
+echo "Restarting services..."
+systemctl start mesh_bot.service
+systemctl start pong_bot.service
+systemctl start mesh_bot_reporting.service
+systemctl start mesh_bot_w3.service
+echo "Services restarted."
+# Print completion message
+echo "Update completed successfully?"
+exit 0
+# End of script
Author	SHA1	Message	Date
SpudGunMan	bc9ada91b4	Update mesh_bot.py	2025-08-12 11:54:17 -07:00
SpudGunMan	28f06f0a21	Update config.template	2025-08-12 11:50:05 -07:00
SpudGunMan	267fe392e3	tuypo	2025-08-12 11:42:13 -07:00
SpudGunMan	6c1f7940ca	refactor coastal weather changes to config.ini template if you use tide or mwx	2025-08-12 11:35:42 -07:00
SpudGunMan	2fc9281394	Update system.py	2025-08-04 18:54:46 -07:00
SpudGunMan	b5bd1008c2	HowHigh? divideBy3 https://github.com/SpudGunMan/meshing-around/discussions/170	2025-08-03 17:43:10 -07:00
SpudGunMan	ee1db5b7be	Update locationdata.py	2025-08-02 19:21:46 -07:00
SpudGunMan	7395b96337	Update locationdata.py	2025-07-30 10:16:33 -07:00
SpudGunMan	f3c6f77b23	Update mesh_bot.py	2025-07-30 10:13:14 -07:00
SpudGunMan	f6e04a42a0	Update system.py	2025-07-30 10:11:34 -07:00
SpudGunMan	3fcd588d02	bugs and docs Consolidated Tide with MWX fixed up readme and cleaned up rlist in help	2025-07-30 10:05:04 -07:00
SpudGunMan	e1b47484f2	NOAA Coastal Marine Forcast data using older but handy products with new mwx	2025-07-30 08:34:20 -07:00
SpudGunMan	14798cb992	alertDe	2025-07-22 09:28:08 -07:00
Kelly	41c8f0044b	Merge pull request #163 from SudoRand/efficient-chunking Allow chunker to consolidate lines when possible	2025-07-22 08:23:42 -07:00
SpudGunMan	45eefb24d8	enhance retry	2025-07-22 07:02:08 -07:00
SpudGunMan	410d32947c	Update system.py	2025-07-21 20:13:07 -07:00
SpudGunMan	748652ac62	onDisconnect correcting multiple issues adding config.ini feature for dont_retry_disconnect https://github.com/SpudGunMan/meshing-around/issues/137 https://github.com/SpudGunMan/meshing-around/issues/156	2025-07-21 20:10:59 -07:00
SpudGunMan	d715cb6b4d	Update system.py	2025-07-21 04:33:04 -07:00
SpudGunMan	1895a365ae	fix retry and failure correcting multiple issues with some bad code https://github.com/SpudGunMan/meshing-around/issues/137 https://github.com/SpudGunMan/meshing-around/issues/156	2025-07-20 05:41:50 -07:00
SpudGunMan	cc58a38165	Update system.py	2025-07-18 21:24:55 -07:00
SpudGunMan	a8ccb05d56	Update system.py bug of undefined for interface retry	2025-07-16 08:57:39 -07:00
SpudGunMan	a90a533a30	USGS Alerts documented	2025-07-15 21:20:37 -07:00
SpudGunMan	57a4e5d68c	Update README.md	2025-07-15 21:12:23 -07:00
SpudGunMan	7c99b684ad	riverflow never got documented well	2025-07-15 21:11:48 -07:00
SpudGunMan	b957c89d70	Update README.md	2025-07-15 20:32:51 -07:00
SpudGunMan	9b986dd57a	Update locationdata.py allow FIPS only	2025-07-15 20:30:43 -07:00
SpudGunMan	9e348332e5	SAME code back in iPAWS the state only FIPS codes are too wide	2025-07-15 19:09:27 -07:00
SpudGunMan	0cfe759ef6	Update mesh_bot.py	2025-07-15 15:34:32 -07:00
SpudGunMan	e95902ef98	fix Excessive queries to FEMA issue raised https://github.com/SpudGunMan/meshing-around/issues/165 Co-Authored-By: DEVAFRS <180097515+devafrs@users.noreply.github.com>	2025-07-15 15:22:53 -07:00
SpudGunMan	c7df4d88d1	Update config.template Co-Authored-By: Russell Schmidt <836646+rfschmid@users.noreply.github.com>	2025-07-15 14:28:25 -07:00
SpudGunMan	6d01c5a986	further adjustments for 2.7.2 https://github.com/SpudGunMan/meshing-around/pull/164#pullrequestreview-3021705851 and https: //github.com/SpudGunMan/meshing-around/issues/162 Co-Authored-By: SudoRand <25190078+sudorand@users.noreply.github.com>	2025-07-15 11:14:29 -07:00
SpudGunMan	3f882dcfcd	fix message.log fixing issue for log in https://github.com/SpudGunMan/meshing-around/pull/161 Co-Authored-By: SudoRand <25190078+sudorand@users.noreply.github.com>	2025-07-15 09:41:34 -07:00
SpudGunMan	b146fd6f64	Revert "enhance sysinfo" This reverts commit `8709e5aed5`.	2025-07-14 22:55:41 -07:00
SpudGunMan	8709e5aed5	enhance sysinfo ChUtil/Node value	2025-07-14 22:13:49 -07:00
SpudGunMan	caf8a2708b	Update log.py fix time display	2025-07-14 22:04:22 -07:00
SpudGunMan	9b4200c198	Update config.template adjustments for 2.7.2 firmware might change again	2025-07-14 21:54:30 -07:00
SudoRand	097cae6e94	Allow chunker to consolidate lines when possible This allows the chunker to consolidate lines into significantly fewer messages in many cases without exceeding the max chunk size. Without this change, the chunker will either emit all lines in one message (if it fits in a single chunk) or else each line will be in a separate message. This often creates a long series of short messages, which doesn't transmit as quickly or display as compact. Instead, this consolidates as many lines as possible into each message, while being sure to stay within the chunk size limit. This should reduce the load on the mesh, and it's also more readable.	2025-07-14 12:27:14 -06:00
SpudGunMan	0a260b28b6	Update llm.py last time?	2025-06-26 19:30:33 -07:00
SpudGunMan	3f5c6f2e9a	Update llm.py	2025-06-26 19:03:13 -07:00
SpudGunMan	8a4f7a904a	Update llm.py	2025-06-26 18:49:16 -07:00
SpudGunMan	0bc3d392cf	fix Interface logic a condition where TCP interfaces can fail leaving a none condition. this should resolve the errored interface better.	2025-06-25 07:30:46 -07:00
SpudGunMan	5eaef8b5b8	Update sysEnv.sh enhance with git update check Co-Authored-By: Johannes le Roux <dade@dade.co.za>	2025-06-25 07:25:04 -07:00
SpudGunMan	3a0007771d	Update update.sh	2025-06-22 20:04:18 -07:00
SpudGunMan	67ba2b1fb5	Create update.sh	2025-06-22 19:59:31 -07:00
SpudGunMan	f2e7a9aa5c	Update config.template	2025-06-18 12:15:44 -07:00
SpudGunMan	9d22270dde	highfly_ignoreList some nodes have bad altimeters	2025-06-18 12:14:14 -07:00
SpudGunMan	409d07436e	Update settings.py	2025-06-10 11:22:32 -07:00
SpudGunMan	5ab0001f2b	Update system.py https://github.com/SpudGunMan/meshing-around/issues/154	2025-06-08 20:32:28 -07:00
SpudGunMan	5e34537af7	fix reference https://github.com/SpudGunMan/meshing-around/issues/154	2025-06-08 19:26:51 -07:00
SpudGunMan	1764bdf4f3	enhance the database page to include qrz.db	2025-06-07 21:05:49 -07:00
SpudGunMan	2290f07351	Update locationdata.py	2025-06-06 17:54:31 -07:00
SpudGunMan	ee01051cf7	Update config.template	2025-06-06 17:54:29 -07:00
Kelly	de50a52fa6	Merge pull request #153 from rfschmid/allow-dms-to-numeric-short-names	2025-06-05 19:38:44 -07:00
SpudGunMan	8eabfaa9c4	enhance ignore logic	2025-06-04 10:37:58 -07:00
Russell Schmidt	ca7114b058	Allow DMs to numeric short names	2025-06-04 11:55:30 -05:00
Kelly	8b94dc8111	Merge pull request #152 from SudoRand/main	2025-06-01 19:03:01 -07:00
SudoRand	5b26aabb00	Config for whether ollama responds to non-commands The current behavior is that whenever ollama is enabled the LLM replies to all non-command message. This setting allows limiting it the LLM to run only in response to the "ask:" and "askai" commands. Default is True to keep consistent with previous behavior.	2025-06-01 15:32:08 -06:00
SudoRand	67b3c67348	Fix bug that always enabled news_random_line_only This looks like a simple typo that accidentally used read_news_enabled for the news_random_line_only parameter. As a result, the news_random_line_only setting was always treated as True (since this line it only executed if read_news_enabled was True). Now it obeys the configuration value.	2025-06-01 14:02:19 -06:00
SpudGunMan	860cceec59	Update locationdata.py	2025-05-28 15:20:33 -07:00
Kelly	53a0535e55	Merge pull request #149 from SpudGunMan/lab High Altitude Alerts	2025-05-23 19:14:51 -07:00
SpudGunMan	621f4ad916	enhance	2025-05-23 19:10:15 -07:00
SpudGunMan	118857ec15	Update system.py	2025-05-21 16:52:01 -07:00
SpudGunMan	1be13be92a	highfly enhancements	2025-05-21 16:43:56 -07:00
SpudGunMan	895fc3fd37	Update README.md	2025-05-21 16:36:55 -07:00
SpudGunMan	0e0bda60ad	Update system.py	2025-05-21 16:36:52 -07:00
SpudGunMan	903767f4b3	Update settings.py	2025-05-21 16:36:46 -07:00
SpudGunMan	f54d362ea0	Update config.template	2025-05-21 16:36:43 -07:00
SpudGunMan	60bb68c6b5	Update system.py	2025-05-21 16:20:54 -07:00
SpudGunMan	feb9a1d9b3	FlightDetector high alt detection	2025-05-21 16:18:46 -07:00
SpudGunMan	d055c35c96	Update install.sh	2025-05-11 13:07:52 -07:00
SpudGunMan	27820daaf4	Cron4W3	2025-05-10 15:34:33 -07:00
SpudGunMan	56e8e1c0d5	🐇🪵 config register set in config.ini for hop logs	2025-05-01 10:35:43 -07:00
SpudGunMan	4545b8f4a4	Update locationdata.py	2025-04-28 23:10:52 -07:00
SpudGunMan	6ed48d49ce	Update videopoker.py fix gameplay	2025-04-24 15:54:47 -07:00
SpudGunMan	a3a54b081d	Update system.py	2025-04-23 19:34:13 -07:00
SpudGunMan	ab420af63e	Update system.py	2025-04-23 09:24:51 -07:00
SpudGunMan	a55c61c47d	Update web.py	2025-04-23 07:17:02 -07:00
SpudGunMan	7236f47eb7	Update README.md	2025-04-17 13:30:53 -07:00
SpudGunMan	05e11ae5f8	Update README.md	2025-04-13 10:04:15 -07:00
SpudGunMan	f8ffcc19b1	Update config.template	2025-04-13 10:04:13 -07:00
SpudGunMan	ea20eec604	Update README.md	2025-04-11 14:51:50 -07:00
SpudGunMan	d1204d2c26	ignoreEAS and USGS alert word enhance with list to ignore words not wanted for broadcast	2025-04-11 14:32:51 -07:00
SpudGunMan	654d8b3ff7	Update README.md	2025-04-10 16:14:32 -07:00
SpudGunMan	3bf12d62b5	Update mesh_bot.py	2025-04-10 16:09:15 -07:00
SpudGunMan	0ec8613d27	Update install.sh issues raised https://github.com/SpudGunMan/meshing-around/issues/139	2025-04-10 15:57:56 -07:00
SpudGunMan	10dd413ae7	Update config.template	2025-04-10 15:50:12 -07:00
SpudGunMan	09ac7525b3	Update mesh_bot.py	2025-04-10 15:48:47 -07:00
SpudGunMan	aac497dfa0	config.ini Scheduler enhancments request from https://github.com/SpudGunMan/meshing-around/issues/141 enhances with a basic announcement from config.ini	2025-04-10 15:46:36 -07:00