readme update

eliminando espacios en blanco
update
2024-11-06 12:49:37 -03:00 · 2024-11-06 12:47:42 -03:00 · 2024-11-06 10:07:44 -03:00 · 2024-11-05 23:51:10 -03:00 · 2024-11-05 23:21:05 -03:00 · 2024-11-05 19:14:22 -03:00
100 changed files with 1412 additions and 861 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -15,6 +15,8 @@ jobs:
                      chip: esp32
                    - name: ttgo-lora32-v21_915
                      chip: esp32
+                    - name: ttgo_lora32_t3s3_v1_2
+                      chip: esp32s3
                    - name: heltec-lora32-v2
                      chip: esp32
                    - name: heltec_wifi_lora_32_V3
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# CA2RXU LoRa APRS iGate/Digirepeater
+# CA2RXU LoRa APRS iGate/Digipeater

 This firmware is for using ESP32 based boards with LoRa Modules and GPS to live in the APRS world.

@@ -32,11 +32,11 @@ ____________________________________________________

 (NOTE: all boards with 433-868-915 MHz versions)

- TTGO Lilygo LoRa32 v2.1 / v1.6 (they work the same).
+- TTGO Lilygo LoRa32 T3S3 V1.2 and LoRa32 V2.1 (V1.6 is the same).

- TTGO T-Beam v1.0 , v1.1, v1.2 (also variations with SX1262 and SX1268 LoRa Modules).
+- TTGO T-Beam V1.0 , V1.1, V1.2 (also variations with SX1262 and SX1268 LoRa Modules).

- HELTEC V2, V3 , Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker.
+- HELTEC V2, V3 , Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker, Wireless Paper.

 - QRP Labs LightGateway 1.0.

@@ -52,17 +52,19 @@ ____________________________________________________

 ## Timeline (Versions):

+- 2024.11.06 (Silent Update) Working now with Board "VARIANTS".
+- 2024.10.29 Added LILYGO Lora32 T3S3 support.
 - 2024.10.25 Added QRP Labs LightGateway 1.0 support.
 - 2024.10.21 Boards with GPS can now send Real-GPS Beacon (also posible: GPS ambiguity of ~ 1 km).
 - 2024.10.14 Received Packets in WebUI show real Local Time (NTP with GMT offset).
- 2024.10.08 New EcoMode for Remote Digirepeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP and all was 150mA). APRS Message/Queries can start/stop this mode too.
- 2024.10.06 Cross Frequency Digirepeater Rules added.
+- 2024.10.08 New EcoMode for Remote Digipeaters without WiFi/WiFiAP, Screen, Leds (Example: LILYGO LoRa32 uses only 24mA, with WifiAP and all was 150mA). APRS Message/Queries can start/stop this mode too.
+- 2024.10.06 Cross Frequency Digipeater Rules added.
 - 2024.09.23 Libraries Update for SDK3
 - 2024.09.23 Added Enconded Telemetry for Battery (+ External Voltage) in Station GPS Beacon Packet. 
 - 2024.08.23 Wemos S2 Mini DIY LoRa added.
 - 2024.08.19 HELTEC Wireless Paper working (still missing Epaper code).
 - 2024.08.13 Web Authentication for WebUI. Thanks Mitja S57PNX.
- 2024.08.05 WIDE2-n added to WIDE1-n in Digirepeater Modes.
+- 2024.08.05 WIDE2-n added to WIDE1-n in Digipeater Modes.
 - 2024.06.27 External Voltage Divider Resistor configuration on WebUI. Thanks Tilen S54B.
 - 2024.06.26 Personal Note information on WebUI for the Station. Thanks Tilen S54B.
 - 2024.06.24 Callsign Validation fix. Thanks Helge SA7SKY.
@@ -73,7 +75,7 @@ ____________________________________________________
 - 2024.06.08 Callsign Validation for all Station that iGate/Digi hears.
 - 2024.05.27 Battery Monitor for internal and External Voltages (to make board sleep and avoid low discharge of batterys) T-Beam boards now with Battery readings as well.
 - 2024.05.23 Forced Reboot Mode added.
- 2024.05.22 Experimental backup-Digirepeater-Mode when "only" iGate mode loses WiFi connection added.
+- 2024.05.22 Experimental backup-Digipeater-Mode when "only" iGate mode loses WiFi connection added.
 - 2024.05.20 WebConfig update to control whether Messages and Objects should be Tx to RF.
 - 2024.05.17 HELTEC Wireless Stick Lite v3 support added.
 - 2024.05.14 BME modules will be autodetected (I2C Address and if it is BME280/BMP280/BME680).
@@ -85,12 +87,12 @@ ____________________________________________________
 - 2024.04.21 WEB INSTALLER (thanks Damian SQ2CPA).
 - 2024.04.20 New Output Buffer process: no more packets lost.
 - 2024.04.13 Received Packets added on WebUI.
- 2024.04.09 iGate/Digirepeater own GPS beacon is encoded (Base91) now.
+- 2024.04.09 iGate/Digipeater own GPS beacon is encoded (Base91) now.
 - 2024.03.18 OE5HWN MeshCom board support added.
 - 2024.02.25 New Web Configuration UI with WiFi AP (thanks Damian SQ2CPA).
 - 2023.01.28 Updated to ElegantOTA v.3 (AsyncElegantOTA was deprecated).
 - 2024.01.19 TextSerialOutputForApp added to get text from Serial-Output over USB into PC for PinPoint App (https://www.pinpointaprs.com) and APRSIS32 App (http://aprsisce.wikidot.com)
- 2024.01.12 Added iGate Mode to also repeat packets (like a iGate+DigiRepeater) in stationMode 2 and 5.
+- 2024.01.12 Added iGate Mode to also repeat packets (like a iGate+Digipeater) in stationMode 2 and 5.
 - 2024.01.11 Added iGate Mode to enable APRS-IS and LoRa beacon report at the same time.
 - 2024.01.05 Lilygo TTGO T-Beam V1, V1.2, V1 + SX1268, V1.2 + SX1262 support added.
 - 2024.01.02 EByte 400M30S 1 Watt LoRa module for DIY ESP32 iGate support added.
@@ -99,18 +101,18 @@ ____________________________________________________
 - 2023.12.07 MIC-E process and Syslog added.
 - 2023.12.06 HELTEC V2 board support added.
 - 2023.11.26 Small correction to enable Syslog in stationMode5.
- 2023.10.09 Added "WIDE1-1" to Tx packets from iGate to be *repeated* by Digirepeaters.
+- 2023.10.09 Added "WIDE1-1" to Tx packets from iGate to be *repeated* by Digipeaters.
 - 2023.10.09 BMP280 module support added.
 - 2023.08.20 Added External Voltage Measurement (Max 15V!)
 - 2023.08.05 Ground Height Correction for Pressure readings added.
- 2023.07.31 StationMode5 added: iGate when WiFi and APRS available, DigiRepeater when not.
+- 2023.07.31 StationMode5 added: iGate when WiFi and APRS available, Digipeater when not.
 - 2023.07.16 Small OTA, BME module update.
 - 2023.07.05 Adding monitor info of Battery connected.
 - 2023.06.18 Info on Oled Screen mayor update, added RSSI and Distance to Listened Station.
 - 2023.06.17 BME280 Module (Temperature, Humidity, Pressure) support added.
 - 2023.06.12 Syslog added.
 - 2023.06.10 OTA update support for Firmware and Filesystem.
- 2023.06.08 Adding Digirepeater Functions.
+- 2023.06.08 Adding Digipeater Functions.
 - 2023.06.06 Full repack of Code and adding _enableTx_ only for Ham Ops.
 - 2023.05.23 Processing Query's from RF/LoRa or APRS-IS (Send "Help" Message to test).
 - 2023.05.19 Saving Last-Heard Stations for validating Tx Responses.
--- a/common_settings.ini
+++ b/common_settings.ini
@@ -0,0 +1,44 @@
+[common]
+build_flags =
+	-Werror -Wall
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+	-DRADIOLIB_EXCLUDE_CC1101=1
+	-DRADIOLIB_EXCLUDE_NRF24=1
+	-DRADIOLIB_EXCLUDE_RF69=1
+	-DRADIOLIB_EXCLUDE_SX1231=1
+	-DRADIOLIB_EXCLUDE_SX1233=1
+	-DRADIOLIB_EXCLUDE_SI443X=1
+	-DRADIOLIB_EXCLUDE_RFM2X=1
+	-DRADIOLIB_EXCLUDE_AFSK=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+	-DRADIOLIB_EXCLUDE_MORSE=1
+	-DRADIOLIB_EXCLUDE_RTTY=1
+	-DRADIOLIB_EXCLUDE_SSTV=1
+	-DRADIOLIB_EXCLUDE_AX25=1
+	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+	-DRADIOLIB_EXCLUDE_BELL=1
+	-DRADIOLIB_EXCLUDE_PAGER=1
+	-DRADIOLIB_EXCLUDE_FSK4=1
+	-DRADIOLIB_EXCLUDE_APRS=1
+	-DRADIOLIB_EXCLUDE_LORAWAN=1
+	-I variants/${PIOENV}
+lib_deps =
+	adafruit/Adafruit Unified Sensor @ 1.1.14
+	adafruit/Adafruit BME280 Library @ 2.2.4
+	adafruit/Adafruit BMP280 Library @ 2.6.8
+	adafruit/Adafruit BME680 Library @ 2.0.4
+	adafruit/Adafruit Si7021 Library @ 1.5.3
+	arduino-libraries/NTPClient @ 3.2.1
+	ayushsharma82/ElegantOTA @ 3.1.5
+	bblanchon/ArduinoJson @ 6.21.3
+	jgromes/RadioLib @ 6.6.0
+	mathieucarbou/AsyncTCP @ 3.2.5
+	mathieucarbou/ESPAsyncWebServer @ 3.2.3
+	mikalhart/TinyGPSPlus @ 1.0.3	
+display_libs =
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+usb_flags=
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1 
--- a/data_embed/index.html
+++ b/data_embed/index.html
@@ -121,7 +121,7 @@
                                <div class="row">
                                    <div class="col-12">
                                        <label for="callsign" class="form-label"
-                                            >Callsign and SSID</label
+                                            >Callsign - SSID</label
                                        >
                                        <input
                                            type="text"
@@ -152,7 +152,7 @@
                                        <label
                                            for="beacon.path"
                                            class="form-label"
-                                            >Beacon path</label
+                                            >Beacon Path</label
                                        >
                                        <input
                                            type="text"
@@ -492,8 +492,7 @@
                                            <label
                                                for="beacon.sendViaAPRSIS"
                                                class="form-label"
-                                                >Send beacon to
-                                                APRS-IS
+                                                >Send beacon via APRS-IS
                                            </label>
                                        </div>
                                    </div>
@@ -516,12 +515,12 @@
                                        <button class="btn btn-primary" id="send-beacon">Send beacon now</button>
                                    </div>
                                </div>
-                                <div class="row mt-3">
+                                <div class="row mt-4">
                                    <div class="col-12">
                                        <label
                                            for="beacon.interval"
                                            class="form-label"
-                                            >Interval
+                                            >Beacon Interval
                                        </label>
                                        <div class="input-group">
                                            <input
@@ -626,7 +625,7 @@
                                            <label
                                                for="digi.ecoMode"
                                                class="form-label"
-                                                >Eco Mode<small> This will disable WiFi, Display, Leds and lower CPU Speed for Low Power Digirepeater. (<strong>Caution:</strong> Active means No WebUI Configuration, so <strong>ONLY</strong> activate this for Remote Digirepeater)</small></label
+                                                >Eco Mode<small> This will disable WiFi, Display, Leds and lower CPU Speed for Low Power Digipeater. (<strong>Caution:</strong> Active means No WebUI Configuration, so <strong>ONLY</strong> activate this for Remote Digipeater)</small></label
                                            >
                                        </div>
                                    </div>
@@ -1198,7 +1197,7 @@
                                                class="form-label"
                                                ><b>Activate Wx Telemetry</b>
                                                <small
-                                                    >Requires a BME/BMP280, BME680 or Si7021 sensor installed</small
+                                                    >Requires a BME/BMP280, BME680 or Si7021 sensor.</small
                                                ></label
                                            >
                                        </div>
@@ -1296,7 +1295,7 @@
                                            type="text"
                                            name="syslog.server"
                                            id="syslog.server"
-                                            placeholder="192.168.0.100"
+                                            placeholder="lora.link9.net"
                                            class="form-control"
                                            disabled
                                        />
@@ -1744,7 +1743,7 @@
                                    <div class="col-12">
                                        <div class="form-check form-switch">
                                            <div class="form-text">
-                                                When "only" iGate Mode loses WiFi, it will change into a Digirepeater Mode and after 15 min check if WiFi available and return to "only" iGate Mode.
+                                                When "only" iGate Mode loses WiFi, it will change into a Digipeater Mode and after 15 min check if WiFi available and return to "only" iGate Mode.
                                            </div>
                                            <input
                                                type="checkbox"
@@ -1755,7 +1754,7 @@
                                            <label
                                                for="other.backupDigiMode"
                                                class="form-label"
-                                                >Backup Digirepeater Mode</label
+                                                >Backup Digipeater Mode</label
                                            >
                                        </div>
                                    </div>
--- a/data_embed/script.js
+++ b/data_embed/script.js
@@ -251,8 +251,6 @@ document.getElementById('reboot').addEventListener('click', function (e) {

 const wxsensorCheckbox = document.querySelector("input[name='wxsensor.active']");

-const stationModeSelect = document.querySelector("select[name='stationMode']");
-
 function updateImage() {
    const value = document.getElementById("beacon.overlay").value + document.getElementById("beacon.symbol").value;

--- a/platformio.ini
+++ b/platformio.ini
@@ -11,6 +11,10 @@
 [platformio]
 default_envs = ttgo-lora32-v21

+extra_configs =
+	common_settings.ini
+  	variants/*/platformio.ini
+
 [env]
 platform = espressif32 @ 6.7.0
 board_build.partitions = min_spiffs.csv
@@ -25,447 +29,4 @@ board_build.embed_files =
 	data_embed/favicon.png.gz
 extra_scripts = 
 	pre:tools/compress.py
-debug_tool = esp-prog
-
-[common]
-build_flags =
-	-Werror -Wall
-	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-	-DRADIOLIB_EXCLUDE_CC1101=1
-	-DRADIOLIB_EXCLUDE_NRF24=1
-	-DRADIOLIB_EXCLUDE_RF69=1
-	-DRADIOLIB_EXCLUDE_SX1231=1
-	-DRADIOLIB_EXCLUDE_SX1233=1
-	-DRADIOLIB_EXCLUDE_SI443X=1
-	-DRADIOLIB_EXCLUDE_RFM2X=1
-	-DRADIOLIB_EXCLUDE_AFSK=1
-	-DRADIOLIB_EXCLUDE_BELL=1
-	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
-	-DRADIOLIB_EXCLUDE_MORSE=1
-	-DRADIOLIB_EXCLUDE_RTTY=1
-	-DRADIOLIB_EXCLUDE_SSTV=1
-	-DRADIOLIB_EXCLUDE_AX25=1
-	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-	-DRADIOLIB_EXCLUDE_BELL=1
-	-DRADIOLIB_EXCLUDE_PAGER=1
-	-DRADIOLIB_EXCLUDE_FSK4=1
-	-DRADIOLIB_EXCLUDE_APRS=1
-	-DRADIOLIB_EXCLUDE_LORAWAN=1
-lib_deps = 
-	jgromes/RadioLib @ 6.6.0
-	mikalhart/TinyGPSPlus @ 1.0.3
-	bblanchon/ArduinoJson @ 6.21.3
-	adafruit/Adafruit Unified Sensor @ 1.1.14
-	adafruit/Adafruit BME280 Library @ 2.2.4
-	adafruit/Adafruit BMP280 Library @ 2.6.8
-	adafruit/Adafruit BME680 Library @ 2.0.4
-	adafruit/Adafruit Si7021 Library @ 1.5.3
-	ayushsharma82/ElegantOTA @ 3.1.5
-	mathieucarbou/ESPAsyncWebServer @ 3.2.3
-	mathieucarbou/AsyncTCP @ 3.2.5
-	arduino-libraries/NTPClient @ 3.2.1
-display_libs =
-	adafruit/Adafruit GFX Library @ 1.11.9
-	adafruit/Adafruit SSD1306 @ 2.5.10
-
-
-[env:ttgo-lora32-v21]
-board = ttgo-lora32-v21
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_LORA32_V2_1
-	-DHAS_SX1278
-	-DHAS_ADC_CALIBRATION	
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ttgo-lora32-v21_915]
-board = ttgo-lora32-v21
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_LORA32_V2_1_915
-	-DHAS_SX1276
-	-DHAS_ADC_CALIBRATION
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:heltec-lora32-v2]
-board = ttgo-lora32-v21
-build_flags =
-	${common.build_flags}
-	-DHELTEC_V2
-	-DHAS_SX1278
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:heltec_wifi_lora_32_V3]
-board = heltec_wifi_lora_32_V3
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_V3
-	-DHAS_SX1262
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:heltec_wireless_stick]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_WS
-	-DHAS_SX1262
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:heltec_wireless_stick_lite_v3]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_WSL_V3
-	-DHAS_SX1262
-lib_deps =
-	${common.lib_deps}
-
-[env:heltec_wireless_stick_lite_v3_display]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_WSL_V3_DISPLAY
-	-DHAS_SX1262
-lib_deps =
-	${common.lib_deps}
-
-[env:ESP32_DIY_LoRa]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_LoRa
-	-DHAS_SX1278
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_DIY_LoRa_915]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_LoRa_915
-	-DHAS_SX1276
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_DIY_1W_LoRa]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_1W_LoRa
-	-DHAS_SX1268
-	-DHAS_1W_LORA
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_DIY_1W_LoRa_915]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_1W_LoRa_915
-	-DHAS_SX1262
-	-DHAS_1W_LORA
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_DIY_1W_LoRa_LLCC68]
-board = esp32dev
-build_flags =
-	${common.build_flags}
- 	-DESP32_DIY_1W_LoRa_LLCC68
- 	-DHAS_LLCC68
- 	-DHAS_1W_LORA
-lib_deps =
- 	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_DIY_1W_LoRa_Mesh_V1_2]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_1W_LoRa_Mesh_V1_2
-	-DHAS_SX1268
-	-DHAS_1W_LORA
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-
-[env:ttgo-t-beam-v1_2]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_2
-	-DHAS_SX1278
-	-DHAS_AXP2101
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ttgo-t-beam-v1_2_915]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_2_915
-	-DHAS_SX1276
-	-DHAS_AXP2101
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ttgo-t-beam-v1]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_0
-	-DHAS_SX1278
-	-DHAS_AXP192
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ttgo-t-beam-v1_915]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_0_915
-	-DHAS_SX1276
-	-DHAS_AXP192
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ttgo-t-beam-v1_SX1268]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_0_SX1268
-	-DHAS_SX1268
-	-DHAS_AXP192
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ttgo-t-beam-v1_2_SX1262]
-board = ttgo-t-beam
-build_flags =
-	${common.build_flags}
-	-DTTGO_T_Beam_V1_2_SX1262
-	-DHAS_SX1262
-	-DHAS_AXP2101
-	-DHAS_GPS
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	lewisxhe/XPowersLib @ 0.2.4
-
-[env:ESP32_DIY_LoRa_A7670]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_LoRa_A7670
-	-DHAS_SX1278
-	-DHAS_A7670
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	vshymanskyy/TinyGSM @ 0.12.0
-	vshymanskyy/StreamDebugger @ 1.0.1
-
-[env:ESP32_DIY_LoRa_A7670_915]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DESP32_DIY_LoRa_A7670_915
-	-DHAS_SX1276
-	-DHAS_A7670
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-	vshymanskyy/TinyGSM @ 0.12.0
-	vshymanskyy/StreamDebugger @ 1.0.1
-
-
-[env:heltec_wireless_tracker]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_WIRELESS_TRACKER
-	-DHAS_SX1262
-	-DHAS_GPS
-	-DGPS_BAUDRATE=115200
-	-DHAS_TFT
-	-D USER_SETUP_LOADED
-	-D TFT_WIDTH=80
-	-D TFT_HEIGHT=160
-	-D ST7735_DRIVER
-	-D ST7735_GREENTAB160x80
-	-D TFT_RGB_ORDER=TFT_BGR
-	-D TFT_MOSI=42
-	-D TFT_SCLK=41
-	-D TFT_CS=38
-	-D TFT_DC=40
-	-D TFT_RST=39
-	-D TFT_BL=21
-	-D TFT_BACKLIGHT_ON=1
-	-D TOUCH_CS=-1
-	-D LOAD_GLCD
-	-D LOAD_FONT2
-	-D LOAD_FONT4
-	-D LOAD_FONT6
-	-D LOAD_FONT7
-	-D LOAD_FONT8
-	-D SPI_FREQUENCY=27000000
-	-D USE_HSPI_PORT
-	-DARDUINO_USB_MODE=1
-	-DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps =
-	${common.lib_deps}
-	bodmer/TFT_eSPI @ 2.5.43
-
-[env:heltec_ht-ct62]
-board = heltec_wireless_stick_lite
-board_build.mcu = esp32c3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_HTCT62
-	-DHAS_SX1262
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:heltec_wireless_paper]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DHELTEC_WP
-	-DHAS_SX1262
-	-DHAS_EPAPER
-lib_deps =
-	${common.lib_deps}
-
-
-[env:OE5HWN_MeshCom]
-board = esp32dev
-build_flags =
-	${common.build_flags}
-	-DOE5HWN_MeshCom
-	-DHAS_SX1268
-	-DHAS_1W_LORA
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:WEMOS-LOLIN32-OLED-DIY]
-board = lolin32
-build_flags =
-	${common.build_flags}
-	-DWEMOS_LOLIN32_OLED_DIY_LoRa
-	-DHAS_SX1278
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:WEMOS-D1-R32-RA02]
-board = wemos_d1_uno32
-build_flags =
-	${common.build_flags}
-	-DWEMOS_D1_R32_RA02
-	-DHAS_SX1278
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:WEMOS_S2_MINI_DIY_LoRa]
-board = lolin_s2_mini
-build_flags =
-	${common.build_flags}
-	-DWEMOS_S2_MINI_DIY_LoRa
-	-DHAS_SX1278
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:esp32c3_DIY_1W_LoRa]
-board = esp32-c3-devkitm-1
-board_build.mcu = esp32c3
-build_flags =
-	${common.build_flags}
-	-DESP32C3_DIY_1W_LoRa
-	-DHAS_SX1268
-	-DHAS_1W_LORA
-	-DARDUINO_USB_MODE=1
-	-DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:esp32c3_DIY_1W_LoRa_915]
-board = esp32-c3-devkitm-1
-board_build.mcu = esp32c3
-build_flags =
-	${common.build_flags}
-	-DESP32C3_DIY_1W_LoRa_915
-	-DHAS_SX1262
-	-DHAS_1W_LORA
-	-DARDUINO_USB_MODE=1
-	-DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:ESP32_C3_OctopusLab_LoRa]
-board = esp32-c3-devkitm-1
-board_build.mcu = esp32c3
-build_flags =
-	${common.build_flags}
-	-DESP32_C3_OctopusLab_LoRa
-	-DHAS_SX1268
-	-DRADIO_HAS_XTAL
-	-DARDUINO_USB_MODE=1
-	-DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
-
-[env:QRPLabs_LightGateway_1_0]
-board = esp32-s3-devkitc-1
-board_build.mcu = esp32s3
-build_flags =
-	${common.build_flags}
-	-DLIGHTGATEWAY_1_0
-	-DHAS_SX1268
-	-DARDUINO_USB_MODE=1
-	-DARDUINO_USB_CDC_ON_BOOT=1
-lib_deps =
-	${common.lib_deps}
-	${common.display_libs}
+debug_tool = esp-prog
--- a/src/A7670_utils.cpp
+++ b/src/A7670_utils.cpp
@@ -1,6 +1,6 @@
 #include "configuration.h"
 #include "aprs_is_utils.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "A7670_utils.h"
 #include "lora_utils.h"
 #include "display.h"
@@ -200,6 +200,6 @@
                }
            }
            delay(1);
-        } 
+        }
    }
 #endif
--- a/src/A7670_utils.h
+++ b/src/A7670_utils.h
@@ -3,6 +3,7 @@

 #include <Arduino.h>

+
 namespace A7670_Utils {

    bool checkModemOn();
--- a/src/LoRa_APRS_iGate.cpp
+++ b/src/LoRa_APRS_iGate.cpp
@@ -1,16 +1,24 @@
-/*______________________________________________________________________________________________________________
+/*___________________________________________________________________

-██╗      ██████╗ ██████╗  █████╗      █████╗ ██████╗ ██████╗ ███████╗    ██╗ ██████╗  █████╗ ████████╗███████╗
-██║     ██╔═══██╗██╔══██╗██╔══██╗    ██╔══██╗██╔══██╗██╔══██╗██╔════╝    ██║██╔════╝ ██╔══██╗╚══██╔══╝██╔════╝
-██║     ██║   ██║██████╔╝███████║    ███████║██████╔╝██████╔╝███████╗    ██║██║  ███╗███████║   ██║   █████╗  
-██║     ██║   ██║██╔══██╗██╔══██║    ██╔══██║██╔═══╝ ██╔══██╗╚════██║    ██║██║   ██║██╔══██║   ██║   ██╔══╝  
-███████╗╚██████╔╝██║  ██║██║  ██║    ██║  ██║██║     ██║  ██║███████║    ██║╚██████╔╝██║  ██║   ██║   ███████╗
-╚══════╝ ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝    ╚═╝  ╚═╝╚═╝     ╚═╝  ╚═╝╚══════╝    ╚═╝ ╚═════╝ ╚═╝  ╚═╝   ╚═╝   ╚══════╝
+██╗      ██████╗ ██████╗  █████╗      █████╗ ██████╗ ██████╗ ███████╗
+██║     ██╔═══██╗██╔══██╗██╔══██╗    ██╔══██╗██╔══██╗██╔══██╗██╔════╝
+██║     ██║   ██║██████╔╝███████║    ███████║██████╔╝██████╔╝███████╗
+██║     ██║   ██║██╔══██╗██╔══██║    ██╔══██║██╔═══╝ ██╔══██╗╚════██║
+███████╗╚██████╔╝██║  ██║██║  ██║    ██║  ██║██║     ██║  ██║███████║
+╚══════╝ ╚═════╝ ╚═╝  ╚═╝╚═╝  ╚═╝    ╚═╝  ╚═╝╚═╝     ╚═╝  ╚═╝╚══════╝
+                                                                     
+                ██╗ ██████╗  █████╗ ████████╗███████╗
+                ██║██╔════╝ ██╔══██╗╚══██╔══╝██╔════╝
+                ██║██║  ███╗███████║   ██║   █████╗
+                ██║██║   ██║██╔══██║   ██║   ██╔══╝
+                ██║╚██████╔╝██║  ██║   ██║   ███████╗
+                ╚═╝ ╚═════╝ ╚═╝  ╚═╝   ╚═╝   ╚══════╝

-                                          Ricardo Guzman - CA2RXU 
-                              https://github.com/richonguzman/LoRa_APRS_Tracker
-                                 (donations : http://paypal.me/richonguzman)
-______________________________________________________________________________________________________________*/
+
+                       Ricardo Guzman - CA2RXU 
+          https://github.com/richonguzman/LoRa_APRS_Tracker
+             (donations : http://paypal.me/richonguzman)
+___________________________________________________________________*/

 #include <ElegantOTA.h>
 #include <TinyGPS++.h>
@@ -21,8 +29,8 @@ ________________________________________________________________________________
 #include "battery_utils.h"
 #include "aprs_is_utils.h"
 #include "station_utils.h"
-#include "boards_pinout.h"
 #include "battery_utils.h"
+#include "board_pinout.h"
 #include "syslog_utils.h"
 #include "query_utils.h"
 #include "power_utils.h"
@@ -40,7 +48,7 @@ ________________________________________________________________________________
    #include "A7670_utils.h"
 #endif

-String              versionDate             = "2024.10.25";
+String              versionDate             = "2024.11.06";
 Configuration       Config;
 WiFiClient          espClient;
 #ifdef HAS_GPS
@@ -172,7 +180,7 @@ void loop() {

        if (Config.loramodule.txActive && (Config.digi.mode == 2 || Config.digi.mode == 3 || backUpDigiMode)) { // If Digi enabled
            STATION_Utils::clean25SegBuffer();
-            DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi            
+            DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi
        }

        if (Config.tnc.enableServer) { // If TNC server enabled
--- a/src/aprs_is_utils.cpp
+++ b/src/aprs_is_utils.cpp
@@ -101,7 +101,7 @@ namespace APRS_IS_Utils {
            if(aprsisState == "--" && !Config.display.alwaysOn && Config.display.timeout != 0) {
                displayToggle(true);
                lastScreenOn = millis();
-            }            
+            }
        }
        secondLine = "WiFi: ";
        secondLine += wifiState;
@@ -176,7 +176,7 @@ namespace APRS_IS_Utils {
    void processLoRaPacket(const String& packet) {
        if (espClient.connected() || modemLoggedToAPRSIS) {
            if (packet != "") {
-                if ((packet.substring(0, 3) == "\x3c\xff\x01")  && (packet.indexOf("NOGATE") == -1) && (packet.indexOf("RFONLY") == -1)) {                    
+                if ((packet.substring(0, 3) == "\x3c\xff\x01")  && (packet.indexOf("NOGATE") == -1) && (packet.indexOf("RFONLY") == -1)) {
                    int firstColonIndex = packet.indexOf(":");
                    if (firstColonIndex > 5 && firstColonIndex < (packet.length() - 1) && packet[firstColonIndex + 1] != '}' && packet.indexOf("TCPIP") == -1) {
                        const String& Sender = packet.substring(3, packet.indexOf(">"));
@@ -207,7 +207,7 @@ namespace APRS_IS_Utils {
                                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
                            }
                        }
-                    }                    
+                    }
                }
            }
        }
@@ -285,7 +285,7 @@ namespace APRS_IS_Utils {
                            A7670_Utils::uploadToAPRSIS(ackPacket);
                        #else
                            upload(ackPacket);
-                        #endif                        
+                        #endif
                        receivedMessage = AddresseeAndMessage.substring(AddresseeAndMessage.indexOf(":") + 1, AddresseeAndMessage.indexOf("{"));
                    } else {
                        receivedMessage = AddresseeAndMessage.substring(AddresseeAndMessage.indexOf(":") + 1);
--- a/src/battery_utils.cpp
+++ b/src/battery_utils.cpp
@@ -1,7 +1,7 @@
 #include <Arduino.h>
 #include "battery_utils.h"
 #include "configuration.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "power_utils.h"
 #include "utils.h"

@@ -23,7 +23,7 @@ int     telemetryCounter                = random(1,999);
 #ifdef HAS_ADC_CALIBRATION
    #include <esp_adc_cal.h>

-    #if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
+    #if defined(TTGO_LORA32_V2_1) || defined(TTGO_LORA32_V2_1_915)
        #define InternalBattery_ADC_Channel ADC1_CHANNEL_7  // t_lora32 pin35
        #define ExternalVoltage_ADC_Channel ADC1_CHANNEL_6  // t_lora32 pin34
    #endif
@@ -126,7 +126,7 @@ namespace BATTERY_Utils {
                            sample = 0;
                        #endif
                    #endif
-                #endif                
+                #endif
                sampleSum += sample;
                delayMicroseconds(50); 
            }
@@ -182,7 +182,7 @@ namespace BATTERY_Utils {

        float extVoltage;
        #ifdef HAS_ADC_CALIBRATION
-            if (calibrationEnable){       
+            if (calibrationEnable){
                extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars) * voltageDividerTransformation; // in mV
                extVoltage /= 1000;
            } else {
@@ -240,7 +240,7 @@ namespace BATTERY_Utils {
                    tempValue = value;
                    break;
            }
-        }        
+        }

        int firstByte   = tempValue / 91;
        tempValue       -= firstByte * 91;
--- a/src/boards_pinout.h
+++ b/src/boards_pinout.h
@@ -1,313 +0,0 @@
-#ifndef PINS_CONFIG_H_
-#define PINS_CONFIG_H_
-
-#include <Arduino.h>
-
-#undef OLED_SDA
-#undef OLED_SCL
-#undef OLED_RST
-
-
-// LORA MODULES
-#if defined(TTGO_T_LORA32_V2_1) || defined(HELTEC_V2) || defined(ESP32_DIY_LoRa) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0_915)
-    #define RADIO_SCLK_PIN      5       // GPIO5    - SX1278 SCK
-    #define RADIO_MISO_PIN      19      // GPIO19   - SX1278 MISO
-    #define RADIO_MOSI_PIN      27      // GPIO27   - SX1278 MOSI
-    #define RADIO_CS_PIN        18      // GPIO18   - SX1278 CS ---> NSS
-    #define RADIO_RST_PIN       14      // GPIO14   - SX1278 RST
-    #define RADIO_BUSY_PIN      26      // GPIO26   - SX1278 IRQ ---->DIO0
-#endif
-
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS) || defined(HELTEC_WP)
-    #define RADIO_SCLK_PIN      9       // SX1262 SCK
-    #define RADIO_MISO_PIN      11      // SX1262 MISO
-    #define RADIO_MOSI_PIN      10      // SX1262 MOSI
-    #define RADIO_CS_PIN        8       // SX1262 NSS
-    #define RADIO_RST_PIN       12      // SX1262 RST
-    #define RADIO_DIO1_PIN      14      // SX1262 DIO1
-    #define RADIO_BUSY_PIN      13      // SX1262 BUSY
-#endif
-
-#if defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68)   // Ebyte E22 400M30S (SX1268) or E22 900M30S (SX1262) or E220 LLCC68
-    #define RADIO_SCLK_PIN      18
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      23
-    #define RADIO_CS_PIN        5
-    #define RADIO_RST_PIN       27
-    #define RADIO_DIO1_PIN      12
-    #define RADIO_BUSY_PIN      14
-    #define RADIO_RXEN          32
-    #define RADIO_TXEN          25
-#endif
-
-#if defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)  // https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.02-2LCD-FreePins
-    #define RADIO_SCLK_PIN      5
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      27
-    #define RADIO_CS_PIN        18
-    #define RADIO_RST_PIN       23
-    #define RADIO_DIO1_PIN      33
-    #define RADIO_BUSY_PIN      32
-    #define RADIO_RXEN          14
-    #define RADIO_TXEN          13
-#endif
-
-#ifdef WEMOS_LOLIN32_OLED_DIY_LoRa
-    #define RADIO_SCLK_PIN      15
-    #define RADIO_MISO_PIN      13
-    #define RADIO_MOSI_PIN      12
-    #define RADIO_CS_PIN        14
-    #define RADIO_RST_PIN       2
-    #define RADIO_BUSY_PIN      25
-#endif
-
-#if defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262)
-    #define RADIO_SCLK_PIN      5
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      27
-    #define RADIO_CS_PIN        18
-    #define RADIO_DIO0_PIN      26
-    #define RADIO_RST_PIN       23
-    #define RADIO_DIO1_PIN      33
-    #define RADIO_BUSY_PIN      32
-#endif
-
-#if defined(OE5HWN_MeshCom)
-    #define RADIO_SCLK_PIN      18
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      23
-    #define RADIO_CS_PIN        5
-    #define RADIO_RST_PIN       27
-    #define RADIO_DIO1_PIN      33
-    #define RADIO_BUSY_PIN      26
-    #define RADIO_RXEN          14
-    #define RADIO_TXEN          13
-#endif
-
-#if defined(HELTEC_HTCT62)
-    #define RADIO_SCLK_PIN      10   // SX1262 SCK
-    #define RADIO_MISO_PIN      6    // SX1262 MISO
-    #define RADIO_MOSI_PIN      7    // SX1262 MOSI
-    #define RADIO_CS_PIN        8    // SX1262 NSS
-    #define RADIO_RST_PIN       5    // SX1262 RST
-    #define RADIO_DIO1_PIN      3    // SX1262 DIO1
-    #define RADIO_BUSY_PIN      4    // SX1262 BUSY
-#endif
-
-#if defined(ESP32_DIY_LoRa_A7670) || defined(ESP32_DIY_LoRa_A7670_915)
-    #define RADIO_SCLK_PIN      18
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      23
-    #define RADIO_CS_PIN        2
-    #define RADIO_RST_PIN       0
-    #define RADIO_BUSY_PIN      32
-    #define A7670_PWR_PIN       4
-    #define A7670_ResetPin      5
-    #define A7670_TX_PIN        26
-    #define A7670_RX_PIN        27
-#endif
-
-#ifdef WEMOS_D1_R32_RA02
-    #define RADIO_SCLK_PIN      18
-    #define RADIO_MISO_PIN      19
-    #define RADIO_MOSI_PIN      23
-    #define RADIO_CS_PIN        5
-    #define RADIO_BUSY_PIN      12
-    #define RADIO_RST_PIN       13
-    #define RADIO_DIO1_PIN      14
-    #define OLED_SDA            21
-    #define OLED_SCL            22
-    #define OLED_RST            36
-#endif
-
-#if defined(ESP32C3_DIY_1W_LoRa) || defined(ESP32C3_DIY_1W_LoRa_915)
-    #define RADIO_SCLK_PIN      8
-    #define RADIO_MISO_PIN      9
-    #define RADIO_MOSI_PIN      10
-    #define RADIO_CS_PIN        5
-    #define RADIO_RST_PIN       4
-    #define RADIO_DIO1_PIN      2
-    #define RADIO_BUSY_PIN      3
-    #define RADIO_RXEN          6
-    #define RADIO_TXEN          7
-#endif
-
-#ifdef WEMOS_S2_MINI_DIY_LoRa
-    #define RADIO_SCLK_PIN      36
-    #define RADIO_MISO_PIN      37
-    #define RADIO_MOSI_PIN      35
-    #define RADIO_CS_PIN        34
-    #define RADIO_BUSY_PIN      38
-    #define RADIO_RST_PIN       33
-#endif
-
-#ifdef LIGHTGATEWAY_1_0
-    #define RADIO_VCC_PIN       21
-    #define RADIO_SCLK_PIN      12
-    #define RADIO_MISO_PIN      13
-    #define RADIO_MOSI_PIN      11
-    #define RADIO_CS_PIN        10
-    #define RADIO_RST_PIN       9
-    #define RADIO_DIO1_PIN      5
-    #define RADIO_BUSY_PIN      6
-    #define RADIO_RXEN          42
-    #define RADIO_TXEN          14
-#endif
-
-
-// OLED 
-#if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
-    #define OLED_SDA    21
-    #define OLED_SCL    22
-    #define OLED_RST    -1      // Reset pin # (or -1 if sharing Arduino reset pin)
-#endif
-
-#if defined(HELTEC_V2) || defined(HELTEC_WS)
-    #define OLED_SDA    4
-    #define OLED_SCL    15
-    #define OLED_RST    16
-#endif
-
-#if defined(HELTEC_V3)
-    #define OLED_SDA    17
-    #define OLED_SCL    18
-    #define OLED_RST    21
-#endif
-
-#ifdef WEMOS_LOLIN32_OLED_DIY_LoRa
-    #define OLED_SDA    5
-    #define OLED_SCL    4
-    #define OLED_RST    -1
-#endif
-
-#ifdef LIGHTGATEWAY_1_0
-    #define OLED_SDA    3
-    #define OLED_SCL    4
-    #define OLED_RST    -1
-#endif
-
-
-#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915) && !defined(WEMOS_S2_MINI_DIY_LoRa)
-    #define HAS_DISPLAY
-#endif
-
-
-// Leds and other stuff
-#ifdef HELTEC_HTCT62
-    #define BATTERY_PIN         1
-#endif
-#ifdef WEMOS_S2_MINI_DIY_LoRa
-    #define INTERNAL_LED_PIN    15
-#endif
-#if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
-    #define INTERNAL_LED_PIN    25      // Green Led
-    #define BATTERY_PIN         35
-#endif
-#if defined(HELTEC_V2)
-    #define INTERNAL_LED_PIN    25
-    #define BATTERY_PIN         37
-    #define ADC_CTRL            21
-#endif
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WS)
-    #define INTERNAL_LED_PIN    35
-    #define BATTERY_PIN         1
-    #define VEXT_CTRL           36
-    #define ADC_CTRL            37  
-    #define BOARD_I2C_SDA       41
-    #define BOARD_I2C_SCL       42
-    #ifdef HELTEC_WSL_V3_DISPLAY
-        #define OLED_RST    -1
-    #endif
-#endif
-
-#if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)
-    #define INTERNAL_LED_PIN    2
-#endif
-#if defined(ESP32_DIY_LoRa_A7670) || defined(ESP32_DIY_LoRa_A7670_915)
-    #define INTERNAL_LED_PIN    13      // 13 for V1.1 and 12 for V1.0
-    #define BATTERY_PIN         35
-#endif
-
-#ifdef HELTEC_WIRELESS_TRACKER
-    #define INTERNAL_LED_PIN    18
-    #define BATTERY_PIN         1
-    #define ADC_CTRL            2   // HELTEC Wireless Tracker ADC_CTRL = HIGH powers the voltage divider to read BatteryPin. Only on V05 = V1.1
-    #define VEXT_CTRL           3   // To turn on GPS and TFT
-    #define BOARD_I2C_SDA       7
-    #define BOARD_I2C_SCL       6
-#endif
-
-#ifdef HELTEC_WP
-    #define INTERNAL_LED_PIN    18
-    #define BATTERY_PIN         20
-    #define ADC_CTRL            19
-    #define VEXT_CTRL           45
-    #define BOARD_I2C_SDA       37
-    #define BOARD_I2C_SCL       36
-    #define EPAPER_BUSY         7
-    #define EPAPER_RST          6
-    #define EPAPER_DC           5
-    #define EPAPER_CS           4
-    #define EPAPER_SCL          3
-    #define EPAPER_SDA          2
-#endif
-
-#ifdef ESP32_C3_DIY_LoRa        // just testing!
-    #define OLED_SDA         8
-    #define OLED_SCL         9
-    #define OLED_RST         10
-    #define RADIO_SCLK_PIN   4
-    #define RADIO_MISO_PIN   5
-    #define RADIO_MOSI_PIN   6
-    #define RADIO_CS         7
-    #define RADIO_RST_PIN    3
-    #define RADIO_IRQ_PIN    2
-#endif
-
-#if defined(ESP32_C3_OctopusLab_LoRa)
-    #define OLED_SDA            0
-    #define OLED_SCL            1
-    #define OLED_RST            -1
-    #define RADIO_SCLK_PIN      6
-    #define RADIO_MISO_PIN      4
-    #define RADIO_MOSI_PIN      7
-    #define RADIO_CS_PIN        5
-    #define RADIO_DIO1_PIN      3
-    #define RADIO_RST_PIN       -1
-    #define RADIO_BUSY_PIN      8
-#endif
-
-#ifdef LIGHTGATEWAY_1_0
-    #define BUTTON_PIN          0
-    #define INTERNAL_LED_PIN    16
-#endif
-
-
-//      GPS
-#if defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_2_915) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262)
-    #define GPS_RX              12
-    #define GPS_TX              34
-#endif
-
-#if defined( HELTEC_WIRELESS_TRACKER)
-    #define GPS_RX              34
-    #define GPS_TX              33
-#endif
-
-
-/* (Same pins for LILYGO LoRa32 and ESP32 Wroom Dev )
-SX1278-------------------> ESP32 ttgo-lora32-v21 and ESP32 WROOM Dev
-GND                         GND
-DIO1                        -
-DIO2                        -
-DIO3                        -
-VCC                         3.3V
-MISO                        19
-MOSI                        27
-SCLK                        5
-NSS                         18
-DIO0                        26
-REST                        14
-GND                         -  */
-
-#endif
--- a/src/configuration.cpp
+++ b/src/configuration.cpp
@@ -71,7 +71,7 @@ void Configuration::writeFile() {
    data["battery"]["voltageDividerR2"]         = battery.voltageDividerR2;

    data["battery"]["sendVoltageAsTelemetry"]   = battery.sendVoltageAsTelemetry;
-    
+
    data["wxsensor"]["active"]                  = wxsensor.active;
    data["wxsensor"]["heightCorrection"]        = wxsensor.heightCorrection;
    data["wxsensor"]["temperatureCorrection"]   = wxsensor.temperatureCorrection;
@@ -152,7 +152,7 @@ bool Configuration::readFile() {

        beacon.gpsActive                = data["beacon"]["gpsActive"] | false;
        beacon.gpsAmbiguity             = data["beacon"]["gpsAmbiguity"] | false;
-        
+
        aprs_is.active                  = data["aprs_is"]["active"] | false;
        aprs_is.passcode                = data["aprs_is"]["passcode"] | "XYZWV";
        aprs_is.server                  = data["aprs_is"]["server"] | "rotate.aprs2.net";
@@ -160,7 +160,7 @@ bool Configuration::readFile() {
        aprs_is.filter                  = data["aprs_is"]["filter"] | "m/10";
        aprs_is.messagesToRF            = data["aprs_is"]["messagesToRF"] | false;
        aprs_is.objectsToRF             = data["aprs_is"]["objectsToRF"] | false;
-        
+
        digi.mode                       = data["digi"]["mode"] | 0;
        digi.ecoMode                    = data["digi"]["ecoMode"] | false;

@@ -195,7 +195,7 @@ bool Configuration::readFile() {
        wxsensor.temperatureCorrection  = data["wxsensor"]["temperatureCorrection"] | 0.0;

        syslog.active                   = data["syslog"]["active"] | false;
-        syslog.server                   = data["syslog"]["server"] | "192.168.0.100";
+        syslog.server                   = data["syslog"]["server"] | "lora.link9.net";
        syslog.port                     = data["syslog"]["port"] | 514;

        tnc.enableServer                = data["tnc"]["enableServer"] | false;
@@ -262,7 +262,7 @@ void Configuration::init() {

    beacon.gpsActive                = false;
    beacon.gpsAmbiguity             = false;
-    
+
    digi.mode                       = 0;
    digi.ecoMode                    = false;

@@ -292,7 +292,7 @@ void Configuration::init() {
    display.turn180                 = false;

    syslog.active                   = false;
-    syslog.server                   = "192.168.0.100";
+    syslog.server                   = "lora.link9.net";
    syslog.port                     = 514;

    wxsensor.active                 = false;
@@ -315,7 +315,7 @@ void Configuration::init() {
    battery.voltageDividerR1        = 100.0;
    battery.voltageDividerR2        = 27.0;

-    battery.sendVoltageAsTelemetry  = true;
+    battery.sendVoltageAsTelemetry  = false;

    lowPowerMode                    = false;
    lowVoltageCutOff                = 0;
--- a/src/configuration.h
+++ b/src/configuration.h
@@ -5,6 +5,7 @@
 #include <vector>
 #include <FS.h>

+
 class WiFi_AP {
 public:
    String  ssid;
--- a/src/digi_utils.cpp
+++ b/src/digi_utils.cpp
@@ -54,7 +54,7 @@ namespace DIGI_Utils {
                packetToRepeat += APRS_IS_Utils::checkForStartingBytes(packet.substring(packet.indexOf(":")));
            }
            return packetToRepeat;
-        } else {   // CrossFreq Digirepeater
+        } else {   // CrossFreq Digipeater
            String suffix = thirdParty ? ":}" : ":";
            String packetToRepeat = packet.substring(0, packet.indexOf(suffix));
            
@@ -73,7 +73,7 @@ namespace DIGI_Utils {
        }
    }

-    String generateDigiRepeatedPacket(const String& packet, bool thirdParty){
+    String generateDigipeatedPacket(const String& packet, bool thirdParty){
        String temp;
        if (thirdParty) { // only header is used
            const String& header = packet.substring(0, packet.indexOf(":}"));
@@ -147,7 +147,7 @@ namespace DIGI_Utils {
                            }
                        }
                        if (!queryMessage) {
-                            String loraPacket = generateDigiRepeatedPacket(packet.substring(3), thirdPartyPacket);
+                            String loraPacket = generateDigipeatedPacket(packet.substring(3), thirdPartyPacket);
                            if (loraPacket != "") {
                                if (Config.lowPowerMode) {
                                    LoRa_Utils::sendNewPacket(loraPacket);
--- a/src/digi_utils.h
+++ b/src/digi_utils.h
@@ -7,7 +7,7 @@
 namespace DIGI_Utils {

    String  buildPacket(const String& path, const String& packet, bool thirdParty, bool crossFreq);
-    String  generateDigiRepeatedPacket(const String& packet, bool thirdParty);
+    String  generateDigipeatedPacket(const String& packet, bool thirdParty);
    void    processLoRaPacket(const String& packet);
    void    checkEcoMode();

--- a/src/display.cpp
+++ b/src/display.cpp
@@ -1,6 +1,6 @@
 #include <Wire.h>
 #include "configuration.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "display.h"


@@ -11,12 +11,12 @@
        TFT_eSPI tft = TFT_eSPI(); 

        #ifdef HELTEC_WIRELESS_TRACKER
-            #define bigSizeFont     2.5
-            #define smallSizeFont   1.5
-            #define lineSpacing     12
+            #define bigSizeFont     2
+            #define smallSizeFont   1
+            #define lineSpacing     10
        #endif
    #else
-        #if HAS_EPAPER
+        #ifdef HAS_EPAPER
            //
        #else
            #include <Adafruit_GFX.h>
@@ -59,7 +59,7 @@ void displaySetup() {
            tft.setTextFont(0);
            tft.fillScreen(TFT_BLACK);
        #else
-            #if HAS_EPAPER
+            #ifdef HAS_EPAPER
                //
            #else
                #ifdef OLED_DISPLAY_HAS_RST_PIN
@@ -71,9 +71,7 @@ void displaySetup() {

                if(display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
                    displayFound = true;
-                    if (Config.display.turn180) {
-                    display.setRotation(2);
-                    }
+                    if (Config.display.turn180) display.setRotation(2);
                    display.clearDisplay();
                    display.setTextColor(WHITE);
                    display.setTextSize(1);
@@ -81,7 +79,7 @@ void displaySetup() {
                    display.ssd1306_command(SSD1306_SETCONTRAST);
                    display.ssd1306_command(1);
                    display.display();
-                }                
+                }
            #endif
        #endif
        delay(1000);
@@ -94,7 +92,7 @@ void displayToggle(bool toggle) {
            #ifdef HAS_TFT
                digitalWrite(TFT_BL, HIGH);
            #else
-                #if HAS_EPAPER
+                #ifdef HAS_EPAPER
                    // ... to be continued
                #else
                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYON);
@@ -104,7 +102,7 @@ void displayToggle(bool toggle) {
            #ifdef HAS_TFT
                digitalWrite(TFT_BL, LOW);
            #else
-                #if HAS_EPAPER
+                #ifdef HAS_EPAPER
                    // ... to be continued
                #else
                    if (displayFound) display.ssd1306_command(SSD1306_DISPLAYOFF);
--- a/src/display.h
+++ b/src/display.h
@@ -5,6 +5,7 @@

 #define SCREEN_ADDRESS  0x3C    ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32

+
 void cleanTFT();
 void displaySetup();
 void displayToggle(bool toggle);
--- a/src/gps_utils.cpp
+++ b/src/gps_utils.cpp
@@ -1,7 +1,7 @@
 #include <TinyGPS++.h>
 #include <WiFi.h>
 #include "configuration.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "gps_utils.h"
 #include "display.h"
 #include "utils.h"
--- a/src/kiss_utils.h
+++ b/src/kiss_utils.h
@@ -3,6 +3,7 @@

 #include <Arduino.h>

+
 String encodeAddressAX25(String tnc2Address);
 String decodeAddressAX25(const String& ax25Address, bool& isLast, bool isRelay);

--- a/src/lora_utils.cpp
+++ b/src/lora_utils.cpp
@@ -2,7 +2,7 @@
 #include <WiFi.h>
 #include "configuration.h"
 #include "aprs_is_utils.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "syslog_utils.h"
 #include "ntp_utils.h"
 #include "display.h"
@@ -40,6 +40,7 @@ bool transmitFlag    = true;
 int rssi, freqError;
 float snr;

+
 namespace LoRa_Utils {

    void setFlag(void) {
@@ -204,7 +205,7 @@ namespace LoRa_Utils {
                        }
                        lastRxTime = millis();
                        return packet;
-                    }                
+                    }
                } else if (state == RADIOLIB_ERR_CRC_MISMATCH) {
                    rssi        = radio.getRSSI();
                    snr         = radio.getSNR();
--- a/src/lora_utils.h
+++ b/src/lora_utils.h
@@ -12,7 +12,7 @@ namespace LoRa_Utils {
    String  receivePacket();
    void    changeFreqTx();
    void    changeFreqRx();
-    void    startReceive(); // ???
+    void    startReceive();
    void    sleepRadio();

 }
--- a/src/ntp_utils.h
+++ b/src/ntp_utils.h
@@ -3,6 +3,7 @@

 #include <Arduino.h>

+
 namespace NTP_Utils {

    void    setup();
--- a/src/power_utils.cpp
+++ b/src/power_utils.cpp
@@ -1,6 +1,6 @@
 #include "configuration.h"
 #include "battery_utils.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "power_utils.h"

 #if defined(HAS_AXP192) || defined(HAS_AXP2101)
@@ -205,7 +205,7 @@ namespace POWER_Utils {
            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
        #endif

-        #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0)
+        #if defined(HELTEC_V3) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(TTGO_LORA32_T3S3_V1_2)
            Wire.begin(OLED_SDA, OLED_SCL);
        #endif
        
--- a/src/query_utils.cpp
+++ b/src/query_utils.cpp
@@ -51,15 +51,15 @@ namespace QUERY_Utils {
            // agregar callsign para completar donde esta X callsign --> posicion
            Serial.println("estaciones escuchadas directo (ultimos 30 min)");
            answer.concat("?WHERE on development 73!");
-        } else if (queryQuestion.indexOf("?APRSEEM") == 0 && Config.digi.ecoMode == true) {    // Exit DigiRepeater EcoMode
+        } else if (queryQuestion.indexOf("?APRSEEM") == 0 && Config.digi.ecoMode == true) {    // Exit Digipeater EcoMode
            answer = "DigiEcoMode:Stop";
            Config.digi.ecoMode     = false;
            Config.display.alwaysOn = true;
            Config.display.timeout  = 10;
-        } else if (queryQuestion.indexOf("?APRSSEM") == 0 && Config.digi.ecoMode == false) {    // Start DigiRepeater EcoMode
+        } else if (queryQuestion.indexOf("?APRSSEM") == 0 && Config.digi.ecoMode == false) {    // Start Digipeater EcoMode
            answer = "DigiEcoMode:Start";
            Config.digi.ecoMode     = true;
-        } else if (queryQuestion.indexOf("?APRSEMS") == 0) {    // DigiRepeater EcoMode Status
+        } else if (queryQuestion.indexOf("?APRSEMS") == 0) {    // Digipeater EcoMode Status
            answer = (Config.digi.ecoMode) ? "DigiEcoMode:ON" : "DigiEcoMode:OFF";
        }

--- a/src/station_utils.h
+++ b/src/station_utils.h
@@ -16,7 +16,6 @@ struct LastHeardStation {
    String      station;
 };

-
 namespace STATION_Utils {

    void deleteNotHeard();
--- a/src/tnc_utils.cpp
+++ b/src/tnc_utils.cpp
@@ -19,6 +19,7 @@ WiFiServer tncServer(TNC_PORT);
 String inputServerBuffer[INPUT_BUFFER_SIZE];
 String inputSerialBuffer = "";

+
 namespace TNC_Utils {
    
    void setup() {
--- a/src/tnc_utils.h
+++ b/src/tnc_utils.h
@@ -3,6 +3,7 @@

 #include <Arduino.h>

+
 namespace TNC_Utils {

    void setup();
--- a/src/utils.cpp
+++ b/src/utils.cpp
@@ -4,7 +4,7 @@
 #include "station_utils.h"
 #include "battery_utils.h"
 #include "aprs_is_utils.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "syslog_utils.h"
 #include "A7670_utils.h"
 #include "lora_utils.h"
@@ -83,7 +83,7 @@ namespace Utils {
            return "- BACKUP DIGI MODE -";
        } else {
            return "IP :  " + String(WiFi.localIP()[0]) + "." + String(WiFi.localIP()[1]) + "." + String(WiFi.localIP()[2]) + "." + String(WiFi.localIP()[3]);
-        }        
+        }
    }

    void setupDisplay() {
@@ -122,11 +122,15 @@ namespace Utils {
        baseAPRSISTelemetryPacket += ":";

        String baseRFTelemetryPacket = Config.callsign;
-        baseRFTelemetryPacket += ">APLRG1,WIDE1-1::";
+        baseRFTelemetryPacket += ">APLRG1";
+        if (Config.beacon.path.indexOf("WIDE") != -1) {
+            baseRFTelemetryPacket += ",";
+            baseRFTelemetryPacket += Config.beacon.path;
+        }
+        baseRFTelemetryPacket += "::";
        baseRFTelemetryPacket += sender;
        baseRFTelemetryPacket += ":";

-
        String telemetryPacket1 = "EQNS.";
        if (Config.battery.sendInternalVoltage) {
            telemetryPacket1 += "0,0.01,0";
@@ -177,7 +181,7 @@ namespace Utils {
            delay(3000);
        }
        sendStartTelemetry = false;
-    }            
+    }

    void checkBeaconInterval() {
        uint32_t lastTx = millis() - lastBeaconTx;
@@ -200,7 +204,7 @@ namespace Utils {
            if (sendStartTelemetry && Config.battery.sendVoltageAsTelemetry && !Config.wxsensor.active && (Config.battery.sendInternalVoltage || Config.battery.sendExternalVoltage)) {
                sendInitialTelemetryPackets();
            }
-            
+
            STATION_Utils::deleteNotHeard();

            activeStations();
@@ -250,7 +254,7 @@ namespace Utils {
                            secondaryBeaconPacket   += " Batt=";
                            secondaryBeaconPacket   += internalVoltageInfo;
                        }
-                    }      
+                    }
                }
            #endif

@@ -273,8 +277,8 @@ namespace Utils {
                            beaconPacket            += externalVoltageInfo;
                            secondaryBeaconPacket   += " Ext=";
                            secondaryBeaconPacket   += externalVoltageInfo;
-                        }                        
-                    }                    
+                        }
+                    }
                }
            #endif

@@ -286,7 +290,7 @@ namespace Utils {

            if (Config.aprs_is.active && Config.beacon.sendViaAPRSIS && !backUpDigiMode) {
                Utils::println("-- Sending Beacon to APRSIS --");
-                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING IGATE BEACON", 0); 
+                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING IGATE BEACON", 0);
                seventhLine = "     listening...";
                #ifdef HAS_A7670
                    A7670_Utils::uploadToAPRSIS(beaconPacket);
@@ -338,7 +342,7 @@ namespace Utils {
            case 1: // APRS-LoRa
                fifthLine = "APRS-IS ----> LoRa Tx";
                break;
-            case 2: // Digi
+            case 2: // Digipeater
                fifthLine = "LoRa Rx ----> LoRa Tx";
                break;
        }
--- a/src/utils.h
+++ b/src/utils.h
@@ -3,6 +3,7 @@

 #include <Arduino.h>

+
 class ReceivedPacket {
 public:
    String  rxTime;
--- a/src/web_utils.cpp
+++ b/src/web_utils.cpp
@@ -34,6 +34,7 @@ extern const unsigned char favicon_data[] asm("_binary_data_embed_favicon_png_gz
 extern const unsigned char favicon_data_end[] asm("_binary_data_embed_favicon_png_gz_end");
 extern const size_t favicon_data_len = favicon_data_end - favicon_data;

+
 namespace WEB_Utils {

    AsyncWebServer server(80);
@@ -136,7 +137,7 @@ namespace WEB_Utils {

        Config.beacon.gpsActive             = request->hasParam("beacon.gpsActive", true);
        Config.beacon.gpsAmbiguity          = request->hasParam("beacon.gpsAmbiguity", true);
-        
+

        Config.digi.mode                    = request->getParam("digi.mode", true)->value().toInt();
        Config.digi.ecoMode                 = request->hasParam("digi.ecoMode", true);
@@ -186,7 +187,7 @@ namespace WEB_Utils {
            Config.syslog.server            = request->getParam("syslog.server", true)->value();
            Config.syslog.port              = request->getParam("syslog.port", true)->value().toInt();
        }
-        
+
        Config.tnc.enableServer             = request->hasParam("tnc.enableServer", true);
        Config.tnc.enableSerial             = request->hasParam("tnc.enableSerial", true);
        Config.tnc.acceptOwn                = request->hasParam("tnc.acceptOwn", true);
--- a/src/web_utils.h
+++ b/src/web_utils.h
@@ -13,10 +13,6 @@ namespace WEB_Utils {
    void handleNotFound(AsyncWebServerRequest *request);
    void handleStatus(AsyncWebServerRequest *request);
    void handleHome(AsyncWebServerRequest *request);
-
-    //void handleReadConfiguration(AsyncWebServerRequest *request);
-    //void handleWriteConfiguration(AsyncWebServerRequest *request);
-
    void handleStyle(AsyncWebServerRequest *request);
    void handleScript(AsyncWebServerRequest *request);
    void handleBootstrapStyle(AsyncWebServerRequest *request);
--- a/src/wifi_utils.cpp
+++ b/src/wifi_utils.cpp
@@ -1,6 +1,6 @@
 #include <WiFi.h>
 #include "configuration.h"
-#include "boards_pinout.h"
+#include "board_pinout.h"
 #include "wifi_utils.h"
 #include "display.h"
 #include "utils.h"
--- a/src/wx_utils.cpp
+++ b/src/wx_utils.cpp
@@ -125,7 +125,7 @@ namespace WX_Utils {
                            break;
                    }
                }
-            }            
+            }
        }
    }

@@ -232,7 +232,7 @@ namespace WX_Utils {
                presStr = ".....";
            } else {
                presStr = generatePresString(newPress + (Config.wxsensor.heightCorrection/CORRECTION_FACTOR));
-            }           
+            }
            
            fifthLine = "BME-> ";
            fifthLine += String(int(newTemp + Config.wxsensor.temperatureCorrection));
--- a/variants/ESP32_C3_OctopusLab_LoRa/board_pinout.h
+++ b/variants/ESP32_C3_OctopusLab_LoRa/board_pinout.h
@@ -0,0 +1,26 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define RADIO_HAS_XTAL
+    #define RADIO_SCLK_PIN          6
+    #define RADIO_MISO_PIN          4
+    #define RADIO_MOSI_PIN          7
+    #define RADIO_CS_PIN            5
+    #define RADIO_DIO1_PIN          3
+    #define RADIO_RST_PIN           -1
+    #define RADIO_BUSY_PIN          8
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                0
+    #define OLED_SCL                1
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+    
+#endif
--- a/variants/ESP32_C3_OctopusLab_LoRa/platformio.ini
+++ b/variants/ESP32_C3_OctopusLab_LoRa/platformio.ini
@@ -0,0 +1,10 @@
+[env:ESP32_C3_OctopusLab_LoRa]
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D ESP32_C3_OctopusLab_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_1W_LoRa/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa/board_pinout.h
@@ -0,0 +1,31 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           27
+    #define RADIO_DIO1_PIN          12
+    #define RADIO_BUSY_PIN          14
+    #define RADIO_RXEN              32
+    #define RADIO_TXEN              25
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        2
+
+#endif
--- a/variants/ESP32_DIY_1W_LoRa/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_1W_LoRa]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_1W_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_1W_LoRa_915/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa_915/board_pinout.h
@@ -0,0 +1,31 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           27
+    #define RADIO_DIO1_PIN          12
+    #define RADIO_BUSY_PIN          14
+    #define RADIO_RXEN              32
+    #define RADIO_TXEN              25
+
+    //  Display
+    #define HAS_DISPLAY    
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        2
+
+#endif
--- a/variants/ESP32_DIY_1W_LoRa_915/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_915/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_1W_LoRa_915]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_1W_LoRa_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_1W_LoRa_LLCC68/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa_LLCC68/board_pinout.h
@@ -0,0 +1,28 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_LLCC68
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           27
+    #define RADIO_DIO1_PIN          12
+    #define RADIO_BUSY_PIN          14
+    #define RADIO_RXEN              32
+    #define RADIO_TXEN              25
+
+    //  Display
+    #define HAS_DISPLAY
+    
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+#endif
--- a/variants/ESP32_DIY_1W_LoRa_LLCC68/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_LLCC68/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_1W_LoRa_LLCC68]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+ 	-D ESP32_DIY_1W_LoRa_LLCC68
+lib_deps =
+ 	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h
+++ b/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h
@@ -0,0 +1,28 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          5   // https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.02-2LCD-FreePins
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           23
+    #define RADIO_DIO1_PIN          33
+    #define RADIO_BUSY_PIN          32
+    #define RADIO_RXEN              14
+    #define RADIO_TXEN              13
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+#endif
--- a/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/platformio.ini
+++ b/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_1W_LoRa_Mesh_V1_2]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_1W_LoRa_Mesh_V1_2
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_LoRa/board_pinout.h
+++ b/variants/ESP32_DIY_LoRa/board_pinout.h
@@ -0,0 +1,27 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        2
+
+#endif
--- a/variants/ESP32_DIY_LoRa/platformio.ini
+++ b/variants/ESP32_DIY_LoRa/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_LoRa]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_LoRa_915/board_pinout.h
+++ b/variants/ESP32_DIY_LoRa_915/board_pinout.h
@@ -0,0 +1,27 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1276
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        2
+
+#endif
--- a/variants/ESP32_DIY_LoRa_915/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_915/platformio.ini
@@ -0,0 +1,8 @@
+[env:ESP32_DIY_LoRa_915]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_LoRa_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ESP32_DIY_LoRa_A7670/board_pinout.h
+++ b/variants/ESP32_DIY_LoRa_A7670/board_pinout.h
@@ -0,0 +1,34 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            2
+    #define RADIO_RST_PIN           0
+    #define RADIO_BUSY_PIN          32
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        13      // 13 for V1.1 and 12 for V1.0
+    #define BATTERY_PIN             35    
+    
+    #define HAS_A7670
+    #define A7670_PWR_PIN           4
+    #define A7670_ResetPin          5
+    #define A7670_TX_PIN            26
+    #define A7670_RX_PIN            27
+
+#endif
--- a/variants/ESP32_DIY_LoRa_A7670/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_A7670/platformio.ini
@@ -0,0 +1,10 @@
+[env:ESP32_DIY_LoRa_A7670]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_LoRa_A7670
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	vshymanskyy/TinyGSM @ 0.12.0
+	vshymanskyy/StreamDebugger @ 1.0.1
--- a/variants/ESP32_DIY_LoRa_A7670_915/board_pinout.h
+++ b/variants/ESP32_DIY_LoRa_A7670_915/board_pinout.h
@@ -0,0 +1,34 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1276
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            2
+    #define RADIO_RST_PIN           0
+    #define RADIO_BUSY_PIN          32
+
+    //  Display    
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        13      // 13 for V1.1 and 12 for V1.0
+    #define BATTERY_PIN             35
+
+    #define HAS_A7670
+    #define A7670_PWR_PIN           4
+    #define A7670_ResetPin          5
+    #define A7670_TX_PIN            26
+    #define A7670_RX_PIN            27
+
+#endif
--- a/variants/ESP32_DIY_LoRa_A7670_915/platformio.ini
+++ b/variants/ESP32_DIY_LoRa_A7670_915/platformio.ini
@@ -0,0 +1,10 @@
+[env:ESP32_DIY_LoRa_A7670_915]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D ESP32_DIY_LoRa_A7670_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	vshymanskyy/TinyGSM @ 0.12.0
+	vshymanskyy/StreamDebugger @ 1.0.1
--- a/variants/OE5HWN_MeshCom/board_pinout.h
+++ b/variants/OE5HWN_MeshCom/board_pinout.h
@@ -0,0 +1,28 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           27
+    #define RADIO_DIO1_PIN          33
+    #define RADIO_BUSY_PIN          26
+    #define RADIO_RXEN              14
+    #define RADIO_TXEN              13
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+#endif
--- a/variants/OE5HWN_MeshCom/platformio.ini
+++ b/variants/OE5HWN_MeshCom/platformio.ini
@@ -0,0 +1,8 @@
+[env:OE5HWN_MeshCom]
+board = esp32dev
+build_flags =
+	${common.build_flags}
+	-D OE5HWN_MeshCom
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/QRPLabs_LightGateway_1_0/board_pinout.h
+++ b/variants/QRPLabs_LightGateway_1_0/board_pinout.h
@@ -0,0 +1,33 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define RADIO_VCC_PIN           21
+    #define RADIO_SCLK_PIN          12
+    #define RADIO_MISO_PIN          13
+    #define RADIO_MOSI_PIN          11
+    #define RADIO_CS_PIN            10
+    #define RADIO_RST_PIN           9
+    #define RADIO_DIO1_PIN          5
+    #define RADIO_BUSY_PIN          6
+    #define RADIO_RXEN              42
+    #define RADIO_TXEN              14
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                3
+    #define OLED_SCL                4
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        16
+    #define BATTERY_PIN             1
+    #define BUTTON_PIN              0
+
+#endif
--- a/variants/QRPLabs_LightGateway_1_0/platformio.ini
+++ b/variants/QRPLabs_LightGateway_1_0/platformio.ini
@@ -0,0 +1,10 @@
+[env:QRPLabs_LightGateway_1_0]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D LIGHTGATEWAY_1_0
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/WEMOS-D1-R32-RA02/board_pinout.h
+++ b/variants/WEMOS-D1-R32-RA02/board_pinout.h
@@ -0,0 +1,25 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          18
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          23
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           13
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          12
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                36
+
+#endif
--- a/variants/WEMOS-D1-R32-RA02/platformio.ini
+++ b/variants/WEMOS-D1-R32-RA02/platformio.ini
@@ -0,0 +1,8 @@
+[env:WEMOS-D1-R32-RA02]
+board = wemos_d1_uno32
+build_flags =
+	${common.build_flags}
+	-D WEMOS_D1_R32_RA02
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/WEMOS-LOLIN32-OLED-DIY/board_pinout.h
+++ b/variants/WEMOS-LOLIN32-OLED-DIY/board_pinout.h
@@ -0,0 +1,24 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          15
+    #define RADIO_MISO_PIN          13
+    #define RADIO_MOSI_PIN          12
+    #define RADIO_CS_PIN            14
+    #define RADIO_RST_PIN           2
+    #define RADIO_BUSY_PIN          25
+
+    //  Display    
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                5
+    #define OLED_SCL                4
+    #define OLED_RST                -1
+
+#endif
--- a/variants/WEMOS-LOLIN32-OLED-DIY/platformio.ini
+++ b/variants/WEMOS-LOLIN32-OLED-DIY/platformio.ini
@@ -0,0 +1,8 @@
+[env:WEMOS-LOLIN32-OLED-DIY]
+board = lolin32
+build_flags =
+	${common.build_flags}
+	-D WEMOS_LOLIN32_OLED_DIY_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/WEMOS_S2_MINI_DIY_LoRa/board_pinout.h
+++ b/variants/WEMOS_S2_MINI_DIY_LoRa/board_pinout.h
@@ -0,0 +1,16 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          36
+    #define RADIO_MISO_PIN          37
+    #define RADIO_MOSI_PIN          35
+    #define RADIO_CS_PIN            34
+    #define RADIO_RST_PIN           33
+    #define RADIO_BUSY_PIN          38
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        15
+
+#endif
--- a/variants/WEMOS_S2_MINI_DIY_LoRa/platformio.ini
+++ b/variants/WEMOS_S2_MINI_DIY_LoRa/platformio.ini
@@ -0,0 +1,8 @@
+[env:WEMOS_S2_MINI_DIY_LoRa]
+board = lolin_s2_mini
+build_flags =
+	${common.build_flags}
+	-D WEMOS_S2_MINI_DIY_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/esp32c3_DIY_1W_LoRa/board_pinout.h
+++ b/variants/esp32c3_DIY_1W_LoRa/board_pinout.h
@@ -0,0 +1,17 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          8
+    #define RADIO_MISO_PIN          9
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           4
+    #define RADIO_DIO1_PIN          2
+    #define RADIO_BUSY_PIN          3
+    #define RADIO_RXEN              6
+    #define RADIO_TXEN              7
+
+#endif
--- a/variants/esp32c3_DIY_1W_LoRa/platformio.ini
+++ b/variants/esp32c3_DIY_1W_LoRa/platformio.ini
@@ -0,0 +1,10 @@
+[env:esp32c3_DIY_1W_LoRa]
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D ESP32C3_DIY_1W_LoRa
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/esp32c3_DIY_1W_LoRa_915/board_pinout.h
+++ b/variants/esp32c3_DIY_1W_LoRa_915/board_pinout.h
@@ -0,0 +1,17 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define HAS_1W_LORA
+    #define RADIO_SCLK_PIN          8
+    #define RADIO_MISO_PIN          9
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            5
+    #define RADIO_RST_PIN           4
+    #define RADIO_DIO1_PIN          2
+    #define RADIO_BUSY_PIN          3
+    #define RADIO_RXEN              6
+    #define RADIO_TXEN              7
+
+#endif
--- a/variants/esp32c3_DIY_1W_LoRa_915/platformio.ini
+++ b/variants/esp32c3_DIY_1W_LoRa_915/platformio.ini
@@ -0,0 +1,10 @@
+[env:esp32c3_DIY_1W_LoRa_915]
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D ESP32C3_DIY_1W_LoRa_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/heltec-lora32-v2/board_pinout.h
+++ b/variants/heltec-lora32-v2/board_pinout.h
@@ -0,0 +1,29 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                4
+    #define OLED_SCL                15
+    #define OLED_RST                16
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        25
+    #define BATTERY_PIN             37
+    #define ADC_CTRL                21
+    
+#endif
--- a/variants/heltec-lora32-v2/platformio.ini
+++ b/variants/heltec-lora32-v2/platformio.ini
@@ -0,0 +1,8 @@
+[env:heltec-lora32-v2]
+board = ttgo-lora32-v21
+build_flags =
+	${common.build_flags}
+	-D HELTEC_V2
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/heltec_ht-ct62/board_pinout.h
+++ b/variants/heltec_ht-ct62/board_pinout.h
@@ -0,0 +1,17 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          10
+    #define RADIO_MISO_PIN          6
+    #define RADIO_MOSI_PIN          7
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           5
+    #define RADIO_DIO1_PIN          3
+    #define RADIO_BUSY_PIN          4
+
+    //  Aditional Config
+    #define BATTERY_PIN             1
+
+#endif
--- a/variants/heltec_ht-ct62/platformio.ini
+++ b/variants/heltec_ht-ct62/platformio.ini
@@ -0,0 +1,9 @@
+[env:heltec_ht-ct62]
+board = heltec_wireless_stick_lite
+board_build.mcu = esp32c3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_HTCT62
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/heltec_wifi_lora_32_V3/board_pinout.h
+++ b/variants/heltec_wifi_lora_32_V3/board_pinout.h
@@ -0,0 +1,33 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                17
+    #define OLED_SCL                18
+    #define OLED_RST                21
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        35
+    #define BATTERY_PIN             1
+    #define VEXT_CTRL               36
+    #define ADC_CTRL                37
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
+#endif
--- a/variants/heltec_wifi_lora_32_V3/platformio.ini
+++ b/variants/heltec_wifi_lora_32_V3/platformio.ini
@@ -0,0 +1,9 @@
+[env:heltec_wifi_lora_32_V3]
+board = heltec_wifi_lora_32_V3
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_V3
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/heltec_wireless_paper/board_pinout.h
+++ b/variants/heltec_wireless_paper/board_pinout.h
@@ -0,0 +1,32 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_EPAPER
+    #define EPAPER_BUSY             7
+    #define EPAPER_RST              6
+    #define EPAPER_DC               5
+    #define EPAPER_CS               4
+    #define EPAPER_SCL              3
+    #define EPAPER_SDA              2
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        18
+    #define BATTERY_PIN             20
+    #define ADC_CTRL                19
+    #define VEXT_CTRL               45
+    #define BOARD_I2C_SDA           37
+    #define BOARD_I2C_SCL           36
+
+#endif
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -0,0 +1,8 @@
+[env:heltec_wireless_paper]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_WP
+lib_deps =
+	${common.lib_deps}
--- a/variants/heltec_wireless_stick/board_pinout.h
+++ b/variants/heltec_wireless_stick/board_pinout.h
@@ -0,0 +1,33 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                4
+    #define OLED_SCL                15
+    #define OLED_RST                16
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        35
+    #define BATTERY_PIN             1
+    #define VEXT_CTRL               36
+    #define ADC_CTRL                37
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
+#endif
--- a/variants/heltec_wireless_stick/platformio.ini
+++ b/variants/heltec_wireless_stick/platformio.ini
@@ -0,0 +1,9 @@
+[env:heltec_wireless_stick]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_WS
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/heltec_wireless_stick_lite_v3/board_pinout.h
+++ b/variants/heltec_wireless_stick_lite_v3/board_pinout.h
@@ -0,0 +1,22 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        35
+    #define BATTERY_PIN             1
+    #define VEXT_CTRL               36
+    #define ADC_CTRL                37
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
+#endif
--- a/variants/heltec_wireless_stick_lite_v3/platformio.ini
+++ b/variants/heltec_wireless_stick_lite_v3/platformio.ini
@@ -0,0 +1,8 @@
+[env:heltec_wireless_stick_lite_v3]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_WSL_V3
+lib_deps =
+	${common.lib_deps}
--- a/variants/heltec_wireless_stick_lite_v3_display/board_pinout.h
+++ b/variants/heltec_wireless_stick_lite_v3_display/board_pinout.h
@@ -0,0 +1,26 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9
+    #define RADIO_MISO_PIN          11
+    #define RADIO_MOSI_PIN          10
+    #define RADIO_CS_PIN            8
+    #define RADIO_RST_PIN           12
+    #define RADIO_DIO1_PIN          14
+    #define RADIO_BUSY_PIN          13
+
+    //  Display
+    #define HAS_DISPLAY
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        35
+    #define BATTERY_PIN             1
+    #define VEXT_CTRL               36
+    #define ADC_CTRL                37
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
+#endif
--- a/variants/heltec_wireless_stick_lite_v3_display/platformio.ini
+++ b/variants/heltec_wireless_stick_lite_v3_display/platformio.ini
@@ -0,0 +1,8 @@
+[env:heltec_wireless_stick_lite_v3_display]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	-D HELTEC_WSL_V3_DISPLAY
+lib_deps =
+	${common.lib_deps}
--- a/variants/heltec_wireless_tracker/board_pinout.h
+++ b/variants/heltec_wireless_tracker/board_pinout.h
@@ -0,0 +1,32 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          9       // SX1262 SCK
+    #define RADIO_MISO_PIN          11      // SX1262 MISO
+    #define RADIO_MOSI_PIN          10      // SX1262 MOSI
+    #define RADIO_CS_PIN            8       // SX1262 NSS
+    #define RADIO_RST_PIN           12      // SX1262 RST
+    #define RADIO_DIO1_PIN          14      // SX1262 DIO1
+    #define RADIO_BUSY_PIN          13      // SX1262 BUSY
+    
+    //  Display
+    #define HAS_DISPLAY
+    #define HAS_TFT
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        18
+    #define BATTERY_PIN             1    
+    #define ADC_CTRL                2   // HELTEC Wireless Tracker ADC_CTRL = HIGH powers the voltage divider to read BatteryPin. Only on V05 = V1.1
+    #define VEXT_CTRL               3   // To turn on GPS and TFT
+    #define BOARD_I2C_SDA           7
+    #define BOARD_I2C_SCL           6
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_BAUDRATE            115200
+    #define GPS_RX                  34
+    #define GPS_TX                  33
+
+#endif
--- a/variants/heltec_wireless_tracker/platformio.ini
+++ b/variants/heltec_wireless_tracker/platformio.ini
@@ -0,0 +1,32 @@
+[env:heltec_wireless_tracker]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	${common.build_flags}
+	${common.usb_flags}
+	-D HELTEC_WIRELESS_TRACKER
+	-D USER_SETUP_LOADED
+	-D TFT_WIDTH=80
+	-D TFT_HEIGHT=160
+	-D ST7735_DRIVER
+	-D ST7735_GREENTAB160x80
+	-D TFT_RGB_ORDER=TFT_BGR
+	-D TFT_MOSI=42
+	-D TFT_SCLK=41
+	-D TFT_CS=38
+	-D TFT_DC=40
+	-D TFT_RST=39
+	-D TFT_BL=21
+	-D TFT_BACKLIGHT_ON=1
+	-D TOUCH_CS=-1
+	-D LOAD_GLCD
+	-D LOAD_FONT2
+	-D LOAD_FONT4
+	-D LOAD_FONT6
+	-D LOAD_FONT7
+	-D LOAD_FONT8
+	-D SPI_FREQUENCY=27000000
+	-D USE_HSPI_PORT
+lib_deps =
+	${common.lib_deps}
+	bodmer/TFT_eSPI @ 2.5.43
--- a/variants/ttgo-lora32-v21/board_pinout.h
+++ b/variants/ttgo-lora32-v21/board_pinout.h
@@ -0,0 +1,29 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        25      // Green Led
+    #define BATTERY_PIN             35   
+	#define HAS_ADC_CALIBRATION    
+
+#endif
--- a/variants/ttgo-lora32-v21/platformio.ini
+++ b/variants/ttgo-lora32-v21/platformio.ini
@@ -0,0 +1,8 @@
+[env:ttgo-lora32-v21]
+board = ttgo-lora32-v21
+build_flags =
+	${common.build_flags}
+	-D TTGO_LORA32_V2_1
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ttgo-lora32-v21_915/board_pinout.h
+++ b/variants/ttgo-lora32-v21_915/board_pinout.h
@@ -0,0 +1,29 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1276
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        25      // Green Led
+    #define BATTERY_PIN             35
+    #define HAS_ADC_CALIBRATION
+    
+#endif
--- a/variants/ttgo-lora32-v21_915/platformio.ini
+++ b/variants/ttgo-lora32-v21_915/platformio.ini
@@ -0,0 +1,8 @@
+[env:ttgo-lora32-v21_915]
+board = ttgo-lora32-v21
+build_flags =
+	${common.build_flags}
+	-D TTGO_LORA32_V2_1_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
--- a/variants/ttgo-t-beam-v1/board_pinout.h
+++ b/variants/ttgo-t-beam-v1/board_pinout.h
@@ -0,0 +1,32 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP192
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1/platformio.ini
+++ b/variants/ttgo-t-beam-v1/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_0
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo-t-beam-v1_2/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_2/board_pinout.h
@@ -0,0 +1,32 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1278
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP2101
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1_2/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1_2]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_2
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo-t-beam-v1_2_915/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_2_915/board_pinout.h
@@ -0,0 +1,32 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1276
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP2101
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1_2_915/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2_915/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1_2_915]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_2_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo-t-beam-v1_2_SX1262/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_2_SX1262/board_pinout.h
@@ -0,0 +1,34 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_DIO0_PIN          26
+    #define RADIO_RST_PIN           23
+    #define RADIO_DIO1_PIN          33
+    #define RADIO_BUSY_PIN          32
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP2101
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1_2_SX1262/platformio.ini
+++ b/variants/ttgo-t-beam-v1_2_SX1262/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1_2_SX1262]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_2_SX1262
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo-t-beam-v1_915/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_915/board_pinout.h
@@ -0,0 +1,31 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1276
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_RST_PIN           14
+    #define RADIO_BUSY_PIN          26
+
+    //  Display
+    #define HAS_DISPLAY
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP192
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1_915/platformio.ini
+++ b/variants/ttgo-t-beam-v1_915/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1_915]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_0_915
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo-t-beam-v1_SX1268/board_pinout.h
+++ b/variants/ttgo-t-beam-v1_SX1268/board_pinout.h
@@ -0,0 +1,34 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1268
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          19
+    #define RADIO_MOSI_PIN          27
+    #define RADIO_CS_PIN            18
+    #define RADIO_DIO0_PIN          26
+    #define RADIO_RST_PIN           23
+    #define RADIO_DIO1_PIN          33
+    #define RADIO_BUSY_PIN          32
+
+    //  Display
+    #define HAS_DISPLAY    
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                21
+    #define OLED_SCL                22
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define HAS_AXP192
+
+    //  GPS
+    #define HAS_GPS
+    #define GPS_RX                  12
+    #define GPS_TX                  34
+
+#endif
--- a/variants/ttgo-t-beam-v1_SX1268/platformio.ini
+++ b/variants/ttgo-t-beam-v1_SX1268/platformio.ini
@@ -0,0 +1,9 @@
+[env:ttgo-t-beam-v1_SX1268]
+board = ttgo-t-beam
+build_flags =
+	${common.build_flags}
+	-D TTGO_T_BEAM_V1_0_SX1268
+lib_deps =
+	${common.lib_deps}
+	${common.display_libs}
+	lewisxhe/XPowersLib @ 0.2.4
--- a/variants/ttgo_lora32_t3s3_v1_2/board_pinout.h
+++ b/variants/ttgo_lora32_t3s3_v1_2/board_pinout.h
@@ -0,0 +1,29 @@
+#ifndef BOARD_PINOUT_H_
+#define BOARD_PINOUT_H_
+
+    //  LoRa Radio
+    #define HAS_SX1262
+    #define RADIO_SCLK_PIN          5
+    #define RADIO_MISO_PIN          3
+    #define RADIO_MOSI_PIN          6
+    #define RADIO_CS_PIN            7
+    #define RADIO_RST_PIN           8
+    #define RADIO_DIO1_PIN          33
+    #define RADIO_BUSY_PIN          34
+
+    //  Display
+    #define HAS_DISPLAY
+
+    #undef  OLED_SDA
+    #undef  OLED_SCL
+    #undef  OLED_RST
+
+    #define OLED_SDA                18
+    #define OLED_SCL                17
+    #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
+
+    //  Aditional Config
+    #define INTERNAL_LED_PIN        37      // Green Led
+    #define BATTERY_PIN             1
+
+#endif
--- a/variants/ttgo_lora32_t3s3_v1_2/platformio.ini
+++ b/variants/ttgo_lora32_t3s3_v1_2/platformio.ini
@@ -0,0 +1,10 @@
+[env:ttgo_lora32_t3s3_v1_2]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+board_upload.flash_size = 4MB
+build_flags =
+    ${common.build_flags}
+	${common.usb_flags}
+    -D TTGO_LORA32_T3S3_V1_2
+lib_deps =
+	${common.lib_deps}
Author	SHA1	Message	Date
richonguzman	afb6a60bfe	readme update	2024-11-06 12:49:37 -03:00
richonguzman	06ef37e4dc	eliminando espacios en blanco	2024-11-06 12:47:42 -03:00
richonguzman	9159362796	update	2024-11-06 10:07:44 -03:00
richonguzman	47c136fdd5	correcciones	2024-11-05 23:51:10 -03:00
richonguzman	970d743b80	refactor inis	2024-11-05 23:21:05 -03:00
richonguzman	7c5e58f3b2	ready for testing	2024-11-05 19:14:22 -03:00
richonguzman	210c7acb70	testing3	2024-11-05 18:20:44 -03:00
richonguzman	8d102a73c1	testing2	2024-11-05 18:15:39 -03:00
richonguzman	5030d2d645	casi casi1	2024-11-05 16:59:21 -03:00
richonguzman	a95f55273f	up1	2024-11-05 16:10:41 -03:00
richonguzman	4014db03c8	2 listas	2024-11-05 15:14:56 -03:00
richonguzman	d96d5f1963	testing	2024-11-05 14:41:41 -03:00
richonguzman	d1cb732ae1	33 folders	2024-11-05 14:12:56 -03:00
richonguzman	1504bf5a7f	code cleaning	2024-10-29 18:57:23 -03:00
richonguzman	3c27e52df7	readme update for T3S3	2024-10-29 10:13:23 -03:00
richonguzman	3d5f3a4914	add Lilygo T3S3	2024-10-29 09:57:26 -03:00
richonguzman	db6292ce59	added but reboots	2024-10-28 09:33:27 -03:00