readme update

Correct logic of serial notifications for APRS-IS and RF beacons

.github/workflows/build.yml

@@ -23,6 +23,8 @@ jobs:
                       chip: esp32s3
                     - name: heltec_wireless_stick_lite_v3
                       chip: esp32s3
+                    - name: heltec_wireless_stick_lite_v3_display
+                      chip: esp32s3
                     - name: ESP32_DIY_LoRa
                       chip: esp32
                     - name: ESP32_DIY_LoRa_915
@@ -31,6 +33,10 @@ jobs:
                       chip: esp32
                     - name: ESP32_DIY_1W_LoRa_915
                       chip: esp32
+                    - name: ESP32_DIY_1W_LoRa_LLCC68
+                      chip: esp32
+                    - name: ESP32_DIY_1W_LoRa_Mesh_V1_2
+                      chip: esp32
                     - name: ttgo-t-beam-v1_2
                       chip: esp32
                     - name: ttgo-t-beam-v1_2_915
@@ -51,16 +57,22 @@ jobs:
                       chip: esp32s3
                     - name: heltec_ht-ct62
                       chip: esp32c3
+                    - name: heltec_wireless_paper
+                      chip: esp32s3
                     - name: OE5HWN_MeshCom
                       chip: esp32
                     - name: WEMOS-LOLIN32-OLED-DIY
                       chip: esp32
                     - name: WEMOS-D1-R32-RA02
                       chip: esp32
+                    - name: WEMOS_S2_MINI_DIY_LoRa
+                      chip: esp32s2
                     - name: esp32c3_DIY_1W_LoRa
                       chip: esp32c3
                     - name: esp32c3_DIY_1W_LoRa_915
                       chip: esp32c3
+                    - name: ESP32_C3_OctopusLab_LoRa
+                      chip: esp32c3
         steps:
             - uses: actions/checkout@v3
 
@@ -102,6 +114,17 @@ jobs:
                       0xe000 installer/firmware/boot_app0.bin \
                       0x10000 installer/firmware/firmware.bin \
                       0x3D0000 installer/firmware/spiffs.bin
+                  elif [ "${{ matrix.target.chip }}" == "esp32s2" ]; then
+                    python installer/bin/esptool/esptool.py --chip esp32s2 merge_bin \
+                      -o installer/web_factory.bin \
+                      --flash_mode dio \
+                      --flash_freq 40m \
+                      --flash_size 4MB \
+                      0x1000 installer/firmware/bootloader.bin \
+                      0x8000 installer/firmware/partitions.bin \
+                      0xe000 installer/firmware/boot_app0.bin \
+                      0x10000 installer/firmware/firmware.bin \
+                      0x3D0000 installer/firmware/spiffs.bin
                   elif [ "${{ matrix.target.chip }}" == "esp32s3" ]; then
                     python installer/bin/esptool/esptool.py --chip esp32s3 merge_bin \
                       -o installer/web_factory.bin \

README.md

@@ -1,31 +1,27 @@
-# Richonguzman / CA2RXU LoRa APRS iGate/Digirepeater
+# CA2RXU LoRa APRS iGate/Digirepeater
 
 This firmware is for using ESP32 based boards with LoRa Modules and GPS to live in the APRS world.
 
 ![Screenshot](https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/images/iGateOledScreen.jpeg)
 
 __(This iGate Firmware works with all LoRa Tracker Firmwares (specially this <a href="https://github.com/richonguzman/LoRa_APRS_Tracker" target="_blank">LoRa APRS Tracker Firmware</a>))__
-
-___________________________________________________
+<br />
 
 ## You can support this project to continue to grow:
 
 [<img src="https://github.com/richonguzman/LoRa_APRS_Tracker/blob/main/images/github-sponsors.png">](https://github.com/sponsors/richonguzman)     [<img src="https://github.com/richonguzman/LoRa_APRS_Tracker/blob/main/images/paypalme.png">](http://paypal.me/richonguzman)
 
-____________________________________________________
+<br />
 
 # WEB FLASHER/INSTALLER is <a href="https://richonguzman.github.io/lora-igate-web-flasher/installer.html" target="_blank">here</a>
-
-____________________________________________________
+<br />
 
 # WIKI
 
 ### FAQ, BME280, TNC and more --> <a href="https://github.com/richonguzman/LoRa_APRS_iGate/wiki/00.-FAQ-(frequently-asked-questions)" target="_blank">here</a>.
 
 ### Installation Guide --> <a href="https://github.com/richonguzman/LoRa_APRS_iGate/wiki/01.-Installation-Guide" target="_blank">here</a>.
-
-
-____________________________________________________
+<br />
 
 # SUPPORTED BOARDS
 
@@ -47,10 +43,20 @@ ____________________________________________________
 
 - Wemos Lolin32 Oled + SX1278 DIY Version.
 
-____________________________________________________
+<br />
+
 ## Timeline (Versions):
 
-- 2024.06.21 Tx packets coming from APRS-IS are (now) formatted into 3rd Party (as they should have been since the beginning).
+- 2024.09.23 Libraries Update for SDK3
+- 2024.09.23 Added Enconded Telemetry for Battery (+ External Voltage) in Station GPS Beacon Packet. 
+- 2024.08.23 Wemos S2 Mini DIY LoRa added.
+- 2024.08.19 HELTEC Wireless Paper working (still missing Epaper code).
+- 2024.08.13 Web Authentication for WebUI. Thanks Mitja S57PNX.
+- 2024.08.05 WIDE2-n added to WIDE1-n in Digirepeater Modes.
+- 2024.06.27 External Voltage Divider Resistor configuration on WebUI. Thanks Tilen S54B.
+- 2024.06.26 Personal Note information on WebUI for the Station. Thanks Tilen S54B.
+- 2024.06.24 Callsign Validation fix. Thanks Helge SA7SKY.
+- 2024.06.21 Tx packets coming from APRS-IS are (now) formatted into 3rd Party (as they should have been since the beginning). Thanks Lynn KJ4ERJ and Geoffrey F4FXL.
 - 2024.06.18 All boards with 433 / 868 / 915 MHz versions.
 - 2024.06.10 ESP32C3 + 1W LoRa Module (E22 400M30S) support added.
 - 2024.06.09 Si7021 module added (with autodetected I2C Address)

data/igate_conf.json

@@ -52,7 +52,10 @@
         "sendExternalVoltage": false,
         "externalVoltagePin": 34,
         "monitorExternalVoltage": false,
-        "externalSleepVoltage": 10.9
+        "externalSleepVoltage": 10.9,
+        "voltageDividerR1": 100.0,
+        "voltageDividerR2": 27.0,
+        "sendVoltageAsTelemetry": true
 	},
     "bme": {
         "active": false,
@@ -73,6 +76,10 @@
         "username": "",
         "password": ""
     },
+    "webadmin": {
+        "username": "admin",
+        "password": ""
+    },
     "other": {
         "rememberStationTime": 30,
         "lowPowerMode": false,
@@ -80,5 +87,6 @@
         "backupDigiMode": false,
         "rebootMode": false,
         "rebootModeTime": 6
-    }
+    },
+    "personalNote": ""
 }

data_embed/index.html

@@ -6,6 +6,7 @@
         <title>LoRa iGate & Digi software &minus; Ricardo Guzman CA2RXU</title>
         <link rel="stylesheet" href="/bootstrap.css" />
         <link rel="stylesheet" href="/style.css" />
+        <link rel="icon" href="/favicon.png" type="image/x-icon">
     </head>
     <body class="bg-body-tertiary">
         <input type="file" accept="text/json,.json" style="display: none" />
@@ -15,7 +16,7 @@
             >
                 <div class="container">
                     <a class="navbar-brand" href=""
-                        >CA2RXU's LoRa</a
+                        >CA2RXU's LoRa iGate</a
                     >
                     <button class="navbar-toggler" type="button" data-bs-toggle="collapse" data-bs-target="#navbarColor01" aria-controls="navbarColor01" aria-expanded="false" aria-label="Toggle navigation">
                         <span class="navbar-toggler-icon"></span>
@@ -107,10 +108,14 @@
                                     Station
                                 </h5>
                                 <small
-                                    >Add your ham callsign and SSID. Optionally,
-                                    you can leave a comment describing your
-                                    station.</small
-                                >
+                                    >Add your Ham callsign and SSID. 
+                                    <br>
+                                    <br>
+                                    You can leave a comment describing your station. 
+                                    <br>
+                                    <br>
+                                    In the bottom there is a field for personal note that can only be seen in WEB GUI.
+                                </small>
                             </div>
                             <div class="col-lg-9 col-sm-12">
                                 <div class="row">
@@ -237,6 +242,20 @@
                                             class="form-control"
                                         />
                                     </div>
+                                    <div class="col-12 mt-3">
+                                        <label
+                                            for="personalNote"
+                                            class="form-label"
+                                            >Personal Note</label
+                                        >
+                                        <input
+                                            type="text"
+                                            name="personalNote"
+                                            id="personalNote"
+                                            class="form-control"
+                                            placeholder="A Couple of words."
+                                        />
+                                    </div>
                                 </div>
                             </div>
                         </div>
@@ -474,8 +493,8 @@
                                                 for="beacon.sendViaAPRSIS"
                                                 class="form-label"
                                                 >Send our beacon to
-                                                APRS-IS</label
-                                            >
+                                                APRS-IS
+                                            </label>
                                         </div>
                                     </div>
                                     <div class="col-6">
@@ -489,8 +508,8 @@
                                             <label
                                                 for="beacon.sendViaRF"
                                                 class="form-label"
-                                                >Send beacon via RF</label
-                                            >
+                                                >Send beacon via RF
+                                            </label>
                                         </div>
                                     </div>
                                     <div class="col-6 d-grid gap-2">
@@ -502,8 +521,8 @@
                                         <label
                                             for="beacon.interval"
                                             class="form-label"
-                                            >Interval</label
-                                        >
+                                            >Interval
+                                        </label>
                                         <div class="input-group">
                                             <input
                                                 type="number"
@@ -516,8 +535,8 @@
                                                 min="1"
                                             />
                                             <span class="input-group-text"
-                                                >minutes</span
-                                            >
+                                                >minutes
+                                            </span>
                                         </div>
                                     </div>
                                 </div>
@@ -561,6 +580,9 @@
                                             <option value="2">
                                                 WIDE1 (fill-in) Digi
                                             </option>
+                                            <option value="3">
+                                                WIDE2 (+WIDE1) Digi
+                                            </option>
                                         </select>
                                     </div>
                                 </div>
@@ -625,8 +647,8 @@
                                         <label
                                             for="lora.txFreq"
                                             class="form-label"
-                                            >Tx Frequency</label
-                                        >
+                                            >Tx Frequency
+                                        </label>
                                         <div class="input-group">
                                             <input
                                                 type="text"
@@ -644,17 +666,17 @@
                                                 class="form-control"
                                                 required=""
                                             />
-                                            <span class="input-group-text"
-                                                >Hz</span
-                                            >
+                                            <span class="input-group-text">
+                                                Hz
+                                            </span>
                                         </div>
                                     </div>
                                     <div class="col-6">
                                         <label
                                             for="lora.rxFreq"
-                                            class="form-label"
-                                            >Rx Frequency</label
-                                        >
+                                            class="form-label">
+                                            Rx Frequency
+                                        </label>
                                         <div class="input-group">
                                             <input
                                                 type="text"
@@ -664,8 +686,8 @@
                                                 class="form-control"
                                             />
                                             <span class="input-group-text"
-                                                >Hz</span
-                                            >
+                                                >Hz
+                                            </span>
                                         </div>
                                     </div>
                                 </div>
@@ -674,8 +696,8 @@
                                         <label
                                             for="action.speed"
                                             class="form-label"
-                                            >Predefined speeds</label
-                                        >
+                                            >Predefined speeds
+                                        </label>
                                         <select
                                             class="form-select form-select"
                                             name="action.speed"
@@ -710,8 +732,8 @@
                                         <label
                                             for="lora.signalBandwidth"
                                             class="form-label"
-                                            >Bandwidth</label
-                                        >
+                                            >Bandwidth
+                                        </label>
                                         <div class="input-group">
                                             <select
                                                 class="form-select form-select"
@@ -735,8 +757,8 @@
                                         <label
                                             for="lora.spreadingFactor"
                                             class="form-label"
-                                            >Spreading Factor</label
-                                        >
+                                            >Spreading Factor
+                                        </label>
                                         <select
                                             class="form-select form-select"
                                             name="lora.spreadingFactor"
@@ -760,9 +782,9 @@
                                     <div class="col-6">
                                         <label
                                             for="lora.codingRate4"
-                                            class="form-label"
-                                            >Coding Rate</label
-                                        >
+                                            class="form-label">
+                                            Coding Rate
+                                        </label>
                                         <select
                                             class="form-select form-select"
                                             name="lora.codingRate4"
@@ -779,9 +801,9 @@
                                     <div class="col-6">
                                         <label
                                             for="lora.power"
-                                            class="form-label"
-                                            >Power</label
-                                        >
+                                            class="form-label">
+                                            Power
+                                        </label>
                                         <div class="input-group">
                                             <input
                                                 type="number"
@@ -925,7 +947,15 @@
                                     </svg>
                                     Battery
                                 </h5>
-                                <small>Battery Monitor & Health</small>
+                                <small>
+                                    Battery Monitor & Health
+                                    <br>
+                                    <br>
+                                    Max Voltage on input pin is 3.3V.
+                                    <br>
+                                    <br>
+                                    Calculate voltage divider accordingly.
+                                </small>
                             </div>
                             <div class="col-9 mt-2">
                                 <div class="row mt-2">
@@ -946,14 +976,15 @@
                                         <div class="form-check form-switch">
                                             <input
                                                 type="checkbox"
-                                                name="battery.sendExternalVoltage"
-                                                id="battery.sendExternalVoltage"
+                                                name="battery.sendVoltageAsTelemetry"
+                                                id="battery.sendVoltageAsTelemetry"
                                                 class="form-check-input"
                                             />
                                             <label
-                                                for="battery.sendExternalVoltage"
+                                                for="battery.sendVoltageAsTelemetry"
                                                 class="form-label"
-                                                >Send External Voltage</label
+                                                style="font-style: italic;"
+                                                >(Send Voltage As Telemetry)</label   
                                             >
                                         </div>
                                         <div class="form-check form-switch mt-3">
@@ -991,21 +1022,20 @@
                                         </div>
                                     </div>
                                     <div class="col-6">
-                                        <div class="form-floating col-7">
+                                        <div class="form-check form-switch">
                                             <input
-                                                type="text"
-                                                name="battery.externalVoltagePin"
-                                                id="battery.externalVoltagePin"
-                                                value="34"
-                                                class="form-control"
+                                                type="checkbox"
+                                                name="battery.sendExternalVoltage"
+                                                id="battery.sendExternalVoltage"
+                                                class="form-check-input"
                                             />
                                             <label
-                                                for="battery.externalVoltagePin"
+                                                for="battery.sendExternalVoltage"
                                                 class="form-label"
-                                                >External Voltage Pin</label
+                                                >Send External Voltage</label
                                             >
                                         </div>
-                                        <div class="form-check form-switch mt-4">
+                                        <div class="form-check form-switch mt-5">
                                             <input
                                                 type="checkbox"
                                                 name="battery.monitorExternalVoltage"
@@ -1038,6 +1068,52 @@
                                                 >
                                             </div>
                                         </div>
+                                        <div class="form-floating col-7 mt-3">
+                                            <input
+                                                type="text"
+                                                name="battery.externalVoltagePin"
+                                                id="battery.externalVoltagePin"
+                                                value="34"
+                                                class="form-control"
+                                            />
+                                            <label
+                                                for="battery.externalVoltagePin"
+                                                class="form-label"
+                                                >External Voltage Pin</label
+                                            >
+                                        </div>
+                                        <div class="col">
+                                            <label for="battery.voltageDividerR1" class="form-label">External Voltage divider R1</label>
+                                            <div class="input-group">
+                                                <input 
+                                                    type="number"
+                                                    name="battery.voltageDividerR1"
+                                                    id="battery.voltageDividerR1"
+                                                    placeholder="100.0"
+                                                    class="form-control"
+                                                    step="0.1"
+                                                    min="1"
+                                                    max="1000"
+                                                />
+                                                <span class="input-group-text">kOhm</span>
+                                            </div>
+                                        </div>
+                                        <div class="col">
+                                            <label for="battery.voltageDividerR2" class="form-label">External Voltage divider R2</label>
+                                            <div class="input-group">
+                                                <input
+                                                    type="number"
+                                                    name="battery.voltageDividerR2"
+                                                    id="battery.voltageDividerR2"
+                                                    placeholder="27.0"
+                                                    class="form-control"
+                                                    step="0.1"
+                                                    min="1"
+                                                    max="1000"
+                                                />
+                                                <span class="input-group-text">kOhm</span>
+                                            </div>
+                                        </div>
                                     </div>
                                 </div>
                             </div>
@@ -1061,7 +1137,7 @@
                                     </svg>
                                     Telemetry
                                 </h5>
-                                <small>Define the telemetry</small>
+                                <small>Define Wx telemetry</small>
                             </div>
                             <div class="col-9 mt-2">
                                 <div class="row">
@@ -1078,9 +1154,7 @@
                                                 class="form-label"
                                                 ><b>Activate Wx Telemetry</b>
                                                 <small
-                                                    >Requires a BME/BMP280 or
-                                                    BME680 sensor
-                                                    installed</small
+                                                    >Requires a BME/BMP280, BME680 or Si7021 sensor installed</small
                                                 ></label
                                             >
                                         </div>
@@ -1339,7 +1413,7 @@
                                                 type="number"
                                                 name="other.rebootModeTime"
                                                 id="other.rebootModeTime"
-                                                placeholder="0"
+                                                placeholder="6"
                                                 class="form-control"
                                                 step="6"
                                                 min="6"
@@ -1481,6 +1555,75 @@
                         </div>
                         <hr />
 
+                        <div class="row my-5 d-flex align-items-top">
+                            <div class="col-lg-3 col-sm-12">
+                                <h5>
+                                    <svg
+                                        xmlns="http://www.w3.org/2000/svg"
+                                        width="20"
+                                        height="20"
+                                        fill="currentColor"
+                                        class="bi bi-cloud-upload-fill"
+                                        viewBox="0 0 16 16"
+                                    >
+                                        <path
+                                            fill-rule="evenodd"
+                                            d="M8 0a5.53 5.53 0 0 0-3.594 1.342c-.766.66-1.321 1.52-1.464 2.383C1.266 4.095 0 5.555 0 7.318 0 9.366 1.708 11 3.781 11H7.5V5.707L5.354 7.854a.5.5 0 1 1-.708-.708l3-3a.5.5 0 0 1 .708 0l3 3a.5.5 0 0 1-.708.708L8.5 5.707V11h4.188C14.502 11 16 9.57 16 7.773c0-1.636-1.242-2.969-2.834-3.194C12.923 1.999 10.69 0 8 0m-.5 14.5V11h1v3.5a.5.5 0 0 1-1 0"
+                                        />
+                                    </svg>
+                                    Admin
+                                </h5>
+                                <small
+                                    >Set your username and password to allow
+                                    access to the web interface.</small
+                                >
+                            </div>
+                            <div class="col-lg-9 col-sm-12">
+                                <div class="row">
+                                    <div class="col-12">
+                                        <div class="form-check form-switch">
+                                            <input
+                                                type="checkbox"
+                                                name="webadmin.active"
+                                                id="webadmin.active"
+                                                class="form-check-input"
+                                            />
+                                            <label
+                                                for="webadmin.active"
+                                                class="form-label"
+                                                >Web interface authentication</label
+                                            >
+                                        </div>
+                                    </div>
+                                </div>
+                                <div class="col-12">
+                                    <label for="webadmin.username" class="form-label"
+                                        >Username</label
+                                    >
+                                    <input
+                                        type="text"
+                                        name="webadmin.username"
+                                        id="webadmin.username"
+                                        class="form-control"
+                                        value="admin"
+                                        required=""
+                                    />
+                                </div>
+                                <div class="col-12 mt-3">
+                                    <label for="webadmin.password" class="form-label"
+                                        >Password</label
+                                    >
+                                    <input
+                                        type="password"
+                                        name="webadmin.password"
+                                        id="webadmin.password"
+                                        class="form-control"
+                                    />
+                                </div>
+                            </div>
+                        </div>
+                        <hr />
+
                         <div class="row my-5 d-flex align-items-top">
                             <div class="col-lg-3 col-sm-12">
                                 <h5>
@@ -1537,7 +1680,7 @@
                                             <label
                                                 for="other.lowPowerMode"
                                                 class="form-label"
-                                                >Low power mode</label
+                                                >Low power mode (only for HT-CT62)</label
                                             >
                                         </div>
                                     </div>
@@ -1702,4 +1845,4 @@
     </body>
     <script src="/bootstrap.js"></script>
     <script src="/script.js"></script>
-</html>
+</html>

data_embed/script.js

@@ -79,7 +79,7 @@ function loadSettings(settings) {
     document.getElementById("beacon.path").value                        = settings.beacon.path;
     document.getElementById("beacon.symbol").value                      = settings.beacon.symbol;
     document.getElementById("beacon.overlay").value                     = settings.beacon.overlay;
-
+    document.getElementById("personalNote").value                       = settings.personalNote;
     document.getElementById("action.symbol").value                      = settings.beacon.overlay + settings.beacon.symbol;
 
     document.querySelector(".list-networks").innerHTML                  = "";
@@ -162,8 +162,11 @@ function loadSettings(settings) {
     document.getElementById("battery.internalSleepVoltage").value       = settings.battery.internalSleepVoltage.toFixed(1);
     document.getElementById("battery.sendExternalVoltage").checked      = settings.battery.sendExternalVoltage;
     document.getElementById("battery.externalVoltagePin").value         = settings.battery.externalVoltagePin;
+    document.getElementById("battery.voltageDividerR1").value           = settings.battery.voltageDividerR1.toFixed(1);
+    document.getElementById("battery.voltageDividerR2").value           = settings.battery.voltageDividerR2.toFixed(1);
     document.getElementById("battery.monitorExternalVoltage").checked   = settings.battery.monitorExternalVoltage;
     document.getElementById("battery.externalSleepVoltage").value       = settings.battery.externalSleepVoltage.toFixed(1);
+    document.getElementById("battery.sendVoltageAsTelemetry").checked   = settings.battery.sendVoltageAsTelemetry;
     
     // TELEMETRY BME/WX
     document.getElementById("bme.active").checked                       = settings.bme.active;
@@ -199,6 +202,11 @@ function loadSettings(settings) {
     document.getElementById("ota.username").value                       = settings.ota.username;
     document.getElementById("ota.password").value                       = settings.ota.password;
 
+    // Webadmin
+    document.getElementById("webadmin.active").checked                  = settings.webadmin.active;
+    document.getElementById("webadmin.username").value                  = settings.webadmin.username;
+    document.getElementById("webadmin.password").value                  = settings.webadmin.password;
+
     // Experimental
     document.getElementById("other.backupDigiMode").checked             = settings.other.backupDigiMode;
 
@@ -271,8 +279,23 @@ function toggleFields() {
         'input[name="battery.externalVoltagePin"]'
     );
 
-    externalVoltagePinInput.disabled =
-        !sendExternalVoltageCheckbox.checked;
+    externalVoltagePinInput.disabled = !sendExternalVoltageCheckbox.checked;
+    voltageDividerR1.disabled = !sendExternalVoltageCheckbox.checked;
+    voltageDividerR2.disabled = !sendExternalVoltageCheckbox.checked;
+
+    const WebadminCheckbox = document.querySelector(
+        'input[name="webadmin.active"]'
+    );
+
+    const WebadminUsername = document.querySelector(
+        'input[name="webadmin.username"]'
+    );
+
+    const WebadminPassword = document.querySelector(
+        'input[name="webadmin.password"]'
+    );
+    WebadminUsername.disabled = !WebadminCheckbox.checked;
+    WebadminPassword.disabled = !WebadminCheckbox.checked;
 }
 
 const sendExternalVoltageCheckbox = document.querySelector(
@@ -282,8 +305,34 @@ const externalVoltagePinInput = document.querySelector(
     'input[name="battery.externalVoltagePin"]'
 );
 
+const voltageDividerR1 = document.querySelector(
+    'input[name="battery.voltageDividerR1"]'
+);
+
+const voltageDividerR2 = document.querySelector(
+    'input[name="battery.voltageDividerR2"]'
+);
+
 sendExternalVoltageCheckbox.addEventListener("change", function () {
     externalVoltagePinInput.disabled = !this.checked;
+    voltageDividerR1.disabled = !this.checked;
+    voltageDividerR2.disabled = !this.checked;
+});
+
+const WebadminCheckbox = document.querySelector(
+    'input[name="webadmin.active"]'
+);
+
+const WebadminUsername = document.querySelector(
+    'input[name="webadmin.username"]'
+);
+
+const WebadminPassword = document.querySelector(
+    'input[name="webadmin.password"]'
+);
+WebadminCheckbox.addEventListener("change", function () {
+    WebadminUsername.disabled = !this.checked;
+    WebadminPassword.disabled = !this.checked;
 });
 
 document.querySelector(".new button").addEventListener("click", function () {

installer/install_upgrade.bat

@@ -1,39 +0,0 @@
-@echo off
-echo Loading...
-
-where /q python.exe
-if %errorlevel% neq 0 (
-    echo "Python is not installed. Please install it and try again."
-    exit /b
-)
-
-where /q pip
-if %errorlevel% neq 0 (
-    echo "pip is not installed. Please install it and try again."
-    exit /b
-)
-
-pip show pyserial >nul 2>&1
-if %errorlevel% neq 0 (
-    echo "Installing pyserial..."
-    pip install pyserial
-)
-
-echo Your firmware will be upgraded without factory reset.
-
-echo:
-
-echo IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.bat INSTEAD!
-
-echo:
-
-echo Available COM ports:
-python.exe -c "import serial.tools.list_ports; print('\n'.join([str(c) for c in serial.tools.list_ports.comports()]))"
-
-echo:
-
-set /p port="Enter COM port (for example COM5): "
-
-python.exe ./bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-pause

installer/install_upgrade.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-echo "Your firmware will be upgraded without factory reset."
-echo "IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.sh INSTEAD!"
-
-read -p "Enter COM port (for example /dev/ttyS5): " port
-
-PYTHON_CMD=python
-if command -v python3 &> /dev/null
-then
-    PYTHON_CMD=python3
-fi
-
-PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-echo "Firmware flashed"

installer/install_with_factory_reset.bat

@@ -1,44 +0,0 @@
-@echo off
-echo Loading...
-
-where /q python.exe
-if %errorlevel% neq 0 (
-    echo "Python is not installed. Please install it and try again."
-    exit /b
-)
-
-where /q pip
-if %errorlevel% neq 0 (
-    echo "pip is not installed. Please install it and try again."
-    exit /b
-)
-
-pip show pyserial >nul 2>&1
-if %errorlevel% neq 0 (
-    echo "Installing pyserial..."
-    pip install pyserial
-)
-
-
-echo Your current configuration will be LOST!!!
-echo Your current configuration will be LOST!!!
-echo Your current configuration will be LOST!!!
-
-echo:
-
-echo If you already have this board flashed with our firmware please use install_upgrade.bat instead!
-
-echo:
-
-echo Available COM ports:
-python.exe -c "import serial.tools.list_ports; print('\n'.join([str(c) for c in serial.tools.list_ports.comports()]))"
-
-echo:
-
-set /p port="Enter COM port (for example COM5): "
-
-python.exe bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 2686976 firmware/spiffs.bin
-
-python.exe bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-pause

installer/install_with_factory_reset.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-echo "Your firmware will be upgraded without factory reset."
-echo "IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.sh INSTEAD!"
-
-read -p "Enter COM port (for example /dev/ttyS5): " port
-
-PYTHON_CMD=python
-if command -v python3 &> /dev/null
-then
-    PYTHON_CMD=python3
-fi
-
-$PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 2686976 firmware/spiffs.bin
-
-$PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-echo "Firmware flashed"

platformio.ini

@@ -22,6 +22,7 @@ board_build.embed_files =
 	data_embed/script.js.gz
 	data_embed/bootstrap.css.gz
 	data_embed/bootstrap.js.gz
+	data_embed/favicon.png.gz
 extra_scripts = 
 	pre:tools/compress.py
 debug_tool = esp-prog
@@ -36,9 +37,9 @@ lib_deps =
 	adafruit/Adafruit BMP280 Library @ 2.6.8
 	adafruit/Adafruit BME680 Library @ 2.0.4
 	adafruit/Adafruit Si7021 Library @ 1.5.3
-	ayushsharma82/ElegantOTA @ 3.1.1
-	ottowinter/ESPAsyncWebServer-esphome @ 3.2.2
-	esphome/AsyncTCP-esphome @ 2.1.1
+	ayushsharma82/ElegantOTA @ 3.1.5
+	mathieucarbou/ESPAsyncWebServer @ 3.2.3
+	mathieucarbou/AsyncTCP @ 3.2.5
 
 [env:ttgo-lora32-v21]
 board = ttgo-lora32-v21
@@ -46,6 +47,7 @@ build_flags =
 	-Werror -Wall
 	-DTTGO_T_LORA32_V2_1
 	-DHAS_SX1278
+	-DHAS_ADC_CALIBRATION
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps = 
 	${common.lib_deps}
@@ -58,6 +60,7 @@ build_flags =
 	-Werror -Wall
 	-DTTGO_T_LORA32_V2_1_915
 	-DHAS_SX1276
+	-DHAS_ADC_CALIBRATION
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps = 
 	${common.lib_deps}
@@ -90,7 +93,7 @@ lib_deps =
 	adafruit/Adafruit SSD1306 @ 2.5.10
 
 [env:heltec_wireless_stick]
-board = heltec_wifi_lora_32_V3
+board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags = 
 	-Werror -Wall
@@ -113,6 +116,17 @@ build_flags =
 lib_deps = 
 	${common.lib_deps}
 
+[env:heltec_wireless_stick_lite_v3_display]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags = 
+	-Werror -Wall
+	-DHELTEC_WSL_V3_DISPLAY
+	-DHAS_SX1262
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+	${common.lib_deps}
+
 [env:ESP32_DIY_LoRa]
 board = esp32dev
 build_flags = 
@@ -163,6 +177,33 @@ lib_deps =
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10
 
+[env:ESP32_DIY_1W_LoRa_LLCC68]
+board = esp32dev
+build_flags = 
+	-Werror -Wall
+ 	-DESP32_DIY_1W_LoRa_LLCC68
+ 	-DHAS_LLCC68
+ 	-DHAS_1W_LORA
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+ 	${common.lib_deps}
+ 	adafruit/Adafruit GFX Library @ 1.11.9
+ 	adafruit/Adafruit SSD1306 @ 2.5.10
+
+[env:ESP32_DIY_1W_LoRa_Mesh_V1_2]
+board = esp32dev
+build_flags = 
+	-Werror -Wall
+	-DESP32_DIY_1W_LoRa_Mesh_V1_2
+	-DHAS_SX1268
+	-DHAS_1W_LORA
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+	${common.lib_deps}
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+
+
 [env:ttgo-t-beam-v1_2]
 board = ttgo-t-beam
 build_flags = 
@@ -277,6 +318,7 @@ lib_deps =
 	vshymanskyy/TinyGSM @ 0.12.0
 	vshymanskyy/StreamDebugger @ 1.0.1
 
+
 [env:heltec_wireless_tracker]
 board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
@@ -327,6 +369,19 @@ lib_deps =
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10
 
+[env:heltec_wireless_paper]
+board = esp32-s3-devkitc-1
+board_build.mcu = esp32s3
+build_flags =
+	-Werror -Wall
+	-DHELTEC_WP
+	-DHAS_SX1262
+	-DHAS_EPAPER
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps =
+	${common.lib_deps}
+
+
 [env:OE5HWN_MeshCom]
 board = esp32dev
 build_flags = 
@@ -364,6 +419,18 @@ lib_deps =
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10
 
+[env:WEMOS_S2_MINI_DIY_LoRa]
+board = lolin_s2_mini
+build_flags = 
+	-Werror -Wall
+	-DWEMOS_S2_MINI_DIY_LoRa
+	-DHAS_SX1278
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps = 
+	${common.lib_deps}
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+
 [env:esp32c3_DIY_1W_LoRa]
 board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
@@ -391,6 +458,22 @@ build_flags =
 	-DARDUINO_USB_MODE=1
 	-DARDUINO_USB_CDC_ON_BOOT=1
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps =
+	${common.lib_deps}
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+
+[env:ESP32_C3_OctopusLab_LoRa]
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+build_flags =
+	-Werror -Wall
+	-DESP32_C3_OctopusLab_LoRa
+	-DHAS_SX1268
+	-DRADIO_HAS_XTAL
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps =
 	${common.lib_deps}
 	adafruit/Adafruit GFX Library @ 1.11.9

src/A7670_utils.cpp

@@ -33,7 +33,7 @@
         bool checkModemOn() {
             bool modemReady = false;
             Serial.print("Starting Modem ...              ");
-            show_display(firstLine, "Starting Modem...", " ", " ", 0);
+            displayShow(firstLine, "Starting Modem...", " ", " ", 0);
 
             pinMode(A7670_ResetPin, OUTPUT);        //A7670 Reset
             digitalWrite(A7670_ResetPin, LOW);
@@ -60,7 +60,7 @@
                         modemReady = true;
                         i = 1;
                         Serial.println("Modem Ready!\n");
-                        show_display(firstLine, "Starting Modem...", "---> Modem Ready", " ", 0);
+                        displayShow(firstLine, "Starting Modem...", "---> Modem Ready", " ", 0);
                         return true;
                     }
                 }
@@ -78,7 +78,7 @@
                 delay(1000);
                 //setup_gps();      // if gps active / won't be need for now
             } else {
-                show_display(firstLine, "Starting Modem...", "---> Failed !!!", " ", 0);
+                displayShow(firstLine, "Starting Modem...", "---> Failed !!!", " ", 0);
                 Serial.println(F("*********** Failed to connect to the modem! ***********"));
             }
         }
@@ -98,26 +98,26 @@
                     //Serial.println(response); // DEBUG of Modem AT message
                     if(response.indexOf("verified") >= 0) {
                         Serial.println("Logged! (User Validated)\n");
-                        show_display(firstLine, "Connecting APRS-IS...", "---> Logged!", " ", 1000);
+                        displayShow(firstLine, "Connecting APRS-IS...", "---> Logged!", " ", 1000);
                         Serial.println("####################   APRS-IS FEED   ####################");
                         validAT = true;
                         i = 1;
                         delayATMessage = 0;
                     } else if (ATMessage == "AT+NETOPEN" && response.indexOf("OK") >= 0) {
                         Serial.println("Port Open!");
-                        show_display(firstLine, "Opening Port...", "---> Port Open", " ", 0);
+                        displayShow(firstLine, "Opening Port...", "---> Port Open", " ", 0);
                         validAT = true;
                         i = 1;
                         delayATMessage = 0;
                     } else if (ATMessage == "AT+NETOPEN" && response.indexOf("Network is already opened") >= 0) {
                         Serial.println("Port Open! (was already opened)");
-                        show_display(firstLine, "Opening Port...", "---> Port Open", " ", 0);
+                        displayShow(firstLine, "Opening Port...", "---> Port Open", " ", 0);
                         validAT = true;
                         i = 1;
                         delayATMessage = 0;
                     } else if (ATMessage.indexOf("AT+CIPOPEN") == 0 && response.indexOf("PB DONE") >= 0) {
                         Serial.println("Contacted!");
-                        show_display(firstLine, "Connecting APRS-IS...", "---> Contacted", " ", 0);
+                        displayShow(firstLine, "Connecting APRS-IS...", "---> Contacted", " ", 0);
                         validAT = true;
                         i = 1;
                         delayATMessage = 0;
@@ -155,17 +155,17 @@
             Serial.println("-----> Connecting to APRS IS");
             while (!modemStartUp) {
                 Serial.print("Opening Port...                 ");
-                show_display(firstLine, "Opening Port...", " ", " ", 0);
+                displayShow(firstLine, "Opening Port...", " ", " ", 0);
                 modemStartUp = checkATResponse("AT+NETOPEN");
                 delay(2000);
             } while (!serverStartUp) {
                 Serial.print("Connecting APRS-IS Server...    ");
-                show_display(firstLine, "Connecting APRS-IS...", " ", " ", 0);
+                displayShow(firstLine, "Connecting APRS-IS...", " ", " ", 0);
                 serverStartUp = checkATResponse("AT+CIPOPEN=0,\"TCP\",\"" + String(Config.aprs_is.server) + "\"," + String(Config.aprs_is.port));
                 delay(2000);
             } while (!userBytesSended) {
                 Serial.print("Writing User Login Data       ");
-                show_display(firstLine, "Connecting APRS-IS...", "---> User Login Data", " ", 0);
+                displayShow(firstLine, "Connecting APRS-IS...", "---> User Login Data", " ", 0);
                 userBytesSended = checkATResponse("AT+CIPSEND=0," + String(loginInfo.length()+1));
                 delay(2000);
             } while (!modemLoggedToAPRSIS) {

src/LoRa_APRS_iGate.cpp

@@ -21,6 +21,7 @@ ________________________________________________________________________________
 #include "aprs_is_utils.h"
 #include "station_utils.h"
 #include "boards_pinout.h"
+#include "battery_utils.h"
 #include "syslog_utils.h"
 #include "query_utils.h"
 #include "power_utils.h"
@@ -37,7 +38,7 @@ ________________________________________________________________________________
     #include "A7670_utils.h"
 #endif
 
-String          versionDate             = "2024.06.25";
+String          versionDate             = "2024.09.23";
 Configuration   Config;
 WiFiClient      espClient;
 
@@ -61,13 +62,12 @@ void setup() {
     Serial.begin(115200);
     POWER_Utils::setup();
     Utils::setupDisplay();
-    Config.check();
     LoRa_Utils::setup();
     Utils::validateFreqs();
     GPS_Utils::generateBeacons();
 
     #ifdef STARTUP_DELAY    // (TEST) just to wait for WiFi init of Routers
-    show_display("", "  STARTUP DELAY ...", "", "", 0);
+    displayShow("", "  STARTUP DELAY ...", "", "", 0);
     delay(STARTUP_DELAY * 60 * 1000);
     #endif
 
@@ -96,7 +96,7 @@ void setup() {
                     String comment = Config.beacon.comment;
                     if (Config.battery.sendInternalVoltage) comment += " Batt=" + String(BATTERY_Utils::checkInternalVoltage(),2) + "V";
                     if (Config.battery.sendExternalVoltage) comment += " Ext=" + String(BATTERY_Utils::checkExternalVoltage(),2) + "V";
-                    STATION_Utils::addToOutputPacketBuffer(GPS_Utils::getiGateLoRaBeaconPacket() + comment);                
+                    LoRa_Utils::sendNewPacket(GPS_Utils::getiGateLoRaBeaconPacket() + comment);
                     lastBeacon = time;
                 }
 
@@ -161,7 +161,7 @@ void loop() {
             APRS_IS_Utils::processLoRaPacket(packet); // Send received packet to APRSIS
         }
 
-        if (Config.digi.mode == 2 || backUpDigiMode) { // If Digi enabled
+        if (Config.loramodule.txActive && (Config.digi.mode == 2 || Config.digi.mode == 3 || backUpDigiMode)) { // If Digi enabled
             STATION_Utils::clean25SegBuffer();
             DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi            
         }
@@ -178,9 +178,9 @@ void loop() {
         APRS_IS_Utils::listenAPRSIS(); // listen received packet from APRSIS
     }
     
-    STATION_Utils::processOutputPacketBuffer();    
+    STATION_Utils::processOutputPacketBuffer();
 
-    show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+    displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
     Utils::checkRebootTime();
     Utils::checkSleepByLowBatteryVoltage(1);
 }

src/aprs_is_utils.cpp

@@ -55,13 +55,13 @@ namespace APRS_IS_Utils {
             Serial.println("Connected!\n(Server: " + String(Config.aprs_is.server) + " / Port: " + String(Config.aprs_is.port) + ")");
             // String filter = "t/m/" + Config.callsign + "/" + (String)Config.aprs_is.reportingDistance;
 
-            String aprsauth = "user ";
-            aprsauth += Config.callsign;
-            aprsauth += " pass ";
-            aprsauth += Config.aprs_is.passcode;
-            aprsauth += " vers CA2RXU_LoRa_iGate 1.3 filter ";
-            aprsauth += Config.aprs_is.filter;
-            upload(aprsauth);
+            String aprsAuth = "user ";
+            aprsAuth += Config.callsign;
+            aprsAuth += " pass ";
+            aprsAuth += Config.aprs_is.passcode;
+            aprsAuth += " vers CA2RXU_LoRa_iGate 2.0 filter ";
+            aprsAuth += Config.aprs_is.filter;
+            upload(aprsAuth);
             delay(200);
         }
     }
@@ -77,7 +77,7 @@ namespace APRS_IS_Utils {
                 wifiState = "AP";
             }            
             if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                display_toggle(true);
+                displayToggle(true);
             }
             lastScreenOn = millis();
         }
@@ -99,7 +99,7 @@ namespace APRS_IS_Utils {
                 }
             #endif
             if(aprsisState == "--" && !Config.display.alwaysOn && Config.display.timeout != 0) {
-                display_toggle(true);
+                displayToggle(true);
                 lastScreenOn = millis();
             }            
         }
@@ -129,7 +129,7 @@ namespace APRS_IS_Utils {
         return buildedPacket;
     }
 
-    bool processReceivedLoRaMessage(const String& sender, const String& packet) {
+    bool processReceivedLoRaMessage(const String& sender, const String& packet, bool thirdParty) {
         String receivedMessage;
         if (packet.indexOf("{") > 0) {     // ack?
             String ackMessage = "ack";
@@ -160,11 +160,11 @@ namespace APRS_IS_Utils {
         }
         if (receivedMessage.indexOf("?") == 0) {
             if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                display_toggle(true);
+                displayToggle(true);
             }
-            STATION_Utils::addToOutputPacketBuffer(QUERY_Utils::process(receivedMessage, sender, 0)); // LoRa
+            STATION_Utils::addToOutputPacketBuffer(QUERY_Utils::process(receivedMessage, sender, false, thirdParty));
             lastScreenOn = millis();
-            show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, "Callsign = " + sender, "TYPE --> QUERY", 0);
+            displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, "Callsign = " + sender, "TYPE --> QUERY", 0);
             return true;
         }
         else {
@@ -187,12 +187,12 @@ namespace APRS_IS_Utils {
                             Addressee.trim();
                             bool queryMessage = false;
                             if (packet.indexOf("::") > 10 && Addressee == Config.callsign) {      // its a message for me!
-                                queryMessage = processReceivedLoRaMessage(Sender, checkForStartingBytes(AddresseeAndMessage));
+                                queryMessage = processReceivedLoRaMessage(Sender, checkForStartingBytes(AddresseeAndMessage), false);
                             }
                             if (!queryMessage) {
                                 const String& aprsPacket = buildPacketToUpload(packet);
                                 if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                                    display_toggle(true);
+                                    displayToggle(true);
                                 }
                                 lastScreenOn = millis();
                                 #ifdef HAS_A7670
@@ -203,7 +203,7 @@ namespace APRS_IS_Utils {
                                     upload(aprsPacket);
                                 #endif
                                 Utils::println("---> Uploaded to APRS-IS");
-                                show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+                                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
                             }
                         }
                     }                    
@@ -291,10 +291,10 @@ namespace APRS_IS_Utils {
                     }
                     if (receivedMessage.indexOf("?") == 0) {
                         Utils::println("Received Query APRS-IS : " + packet);
-                        String queryAnswer = QUERY_Utils::process(receivedMessage, Sender, 1); // APRSIS
+                        String queryAnswer = QUERY_Utils::process(receivedMessage, Sender, true, false);
                         //Serial.println("---> QUERY Answer : " + queryAnswer.substring(0,queryAnswer.indexOf("\n")));
                         if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                            display_toggle(true);
+                            displayToggle(true);
                         }
                         lastScreenOn = millis();
                         delay(500);
@@ -302,7 +302,7 @@ namespace APRS_IS_Utils {
                             A7670_Utils::uploadToAPRSIS(queryAnswer);
                         #else
                             upload(queryAnswer);
-                        #endif                        
+                        #endif
                         SYSLOG_Utils::log(2, queryAnswer, 0, 0.0, 0); // APRSIS TX
                         fifthLine = "APRS-IS ----> APRS-IS";
                         sixthLine = Config.callsign;
@@ -318,16 +318,16 @@ namespace APRS_IS_Utils {
                     Utils::print("Received Message from APRS-IS  : " + packet);
                     if (STATION_Utils::wasHeard(Addressee)) {
                         STATION_Utils::addToOutputPacketBuffer(buildPacketToTx(packet, 1));
-                        display_toggle(true);
+                        displayToggle(true);
                         lastScreenOn = millis();
                         Utils::typeOfPacket(packet, 1); // APRS-LoRa
                     }
                 }
-                show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
+                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, seventhLine, 0);
             } else if (Config.aprs_is.objectsToRF && packet.indexOf(":;") > 0) {
                 Utils::println("Received Object from APRS-IS  : " + packet);
                 STATION_Utils::addToOutputPacketBuffer(buildPacketToTx(packet, 5));
-                display_toggle(true);
+                displayToggle(true);
                 lastScreenOn = millis();
                 Utils::typeOfPacket(packet, 1); // APRS-LoRa
             }

src/aprs_is_utils.h

@@ -12,7 +12,7 @@ namespace APRS_IS_Utils {
     String  checkForStartingBytes(const String& packet);
     
     String  buildPacketToUpload(const String& packet);
-    bool    processReceivedLoRaMessage(const String& sender, const String& packet);
+    bool    processReceivedLoRaMessage(const String& sender, const String& packet, bool thirdParty);
     void    processLoRaPacket(const String& packet);
 
     String  buildPacketToTx(const String& aprsisPacket, uint8_t packetType);

src/battery_utils.cpp

@@ -5,19 +5,43 @@
 #include "power_utils.h"
 #include "utils.h"
 
-extern  Configuration               Config;
-extern  uint32_t                    lastBatteryCheck;
+extern  Configuration                   Config;
+extern  uint32_t                        lastBatteryCheck;
 
-bool    shouldSleepLowVoltage       = false;
+bool    shouldSleepLowVoltage           = false;
 
-float   adcReadingTransformation    = (3.3/4095);
-float   voltageDividerCorrection    = 0.288;
+float   adcReadingTransformation        = (3.3/4095);
+float   voltageDividerCorrection        = 0.288;
+float   readingCorrection               = 0.125;
+float   multiplyCorrection              = 0.035;
 
-// for External Voltage Measurment (MAX = 15Volts !!!)
-float R1 = 100.000; //in Kilo-Ohms
-float R2 = 27.000; //in Kilo-Ohms
-float readingCorrection = 0.125;
-float multiplyCorrection = 0.035;
+float   voltageDividerTransformation    = 0.0;
+
+int     telemetryCounter                = random(1,999);
+
+
+#ifdef HAS_ADC_CALIBRATION
+    #include <esp_adc_cal.h>
+
+    #if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
+        #define InternalBattery_ADC_Channel ADC1_CHANNEL_7  // t_lora32 pin35
+        #define ExternalVoltage_ADC_Channel ADC1_CHANNEL_6  // t_lora32 pin34
+    #endif
+
+    #if CONFIG_IDF_TARGET_ESP32
+    #define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_VREF
+    #elif CONFIG_IDF_TARGET_ESP32S2
+    #define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP
+    #elif CONFIG_IDF_TARGET_ESP32C3
+    #define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP
+    #elif CONFIG_IDF_TARGET_ESP32S3
+    #define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP_FIT
+    #endif
+
+    esp_adc_cal_characteristics_t adc_chars;
+#endif
+
+bool calibrationEnable = false;
 
 
 namespace BATTERY_Utils {
@@ -26,6 +50,46 @@ namespace BATTERY_Utils {
         return (voltage - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
     }
 
+    void adcCalibration() {
+        #ifdef HAS_ADC_CALIBRATION
+            if (calibrationEnable) {
+                adc1_config_width(ADC_WIDTH_BIT_12);
+                adc1_config_channel_atten(InternalBattery_ADC_Channel, ADC_ATTEN_DB_12);
+                adc1_config_channel_atten(ExternalVoltage_ADC_Channel, ADC_ATTEN_DB_12);
+            }
+        #endif
+    }
+
+    void adcCalibrationCheck() {
+        #ifdef HAS_ADC_CALIBRATION
+            esp_err_t ret;
+            ret = esp_adc_cal_check_efuse(ADC_EXAMPLE_CALI_SCHEME);
+            /*if (ret == ESP_ERR_NOT_SUPPORTED) {
+                Serial.println("Calibration scheme not supported, skip software calibration");
+            } else if (ret == ESP_ERR_INVALID_VERSION) {
+                Serial.println("eFuse not burnt, skip software calibration");
+            } else */
+            if (ret == ESP_OK) {
+                esp_adc_cal_characterize(ADC_UNIT_1, ADC_ATTEN_DB_12, ADC_WIDTH_BIT_12, 1100, &adc_chars);
+                //Serial.printf("eFuse Vref:%u mV\n", adc_chars.vref);
+                calibrationEnable = true;
+            } /*else {
+                Serial.println("Invalid Calibration Arg");
+            }*/
+        #endif
+    }
+
+    void setup() {
+        if ((Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) && Config.battery.voltageDividerR2 != 0) voltageDividerTransformation = (Config.battery.voltageDividerR1 + Config.battery.voltageDividerR2) / Config.battery.voltageDividerR2;
+
+        #if defined(HAS_ADC_CALIBRATION)
+            if (Config.battery.sendInternalVoltage || Config.battery.monitorInternalVoltage || Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) {
+                adcCalibrationCheck();
+                adcCalibration();
+            }
+        #endif
+    }
+
     float checkInternalVoltage() { 
         #if defined(HAS_AXP192) || defined(HAS_AXP2101)
             if(POWER_Utils::isBatteryConnected()) {
@@ -40,18 +104,29 @@ namespace BATTERY_Utils {
                 #if defined(HELTEC_WIRELESS_TRACKER)
                     digitalWrite(ADC_CTRL, HIGH);
                 #endif
-                #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3)
+                #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
                     digitalWrite(ADC_CTRL, LOW);
                 #endif
             #endif
 
             for (int i = 0; i < 100; i++) {
-                #ifdef BATTERY_PIN
-                    sample = analogRead(BATTERY_PIN);
-                #endif
-                #if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa)
+                #if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)
                     sample = 0;
-                #endif
+                #else
+                    #ifdef HAS_ADC_CALIBRATION
+                        if (calibrationEnable){
+                            sample = adc1_get_raw(InternalBattery_ADC_Channel);
+                        } else {
+                            sample = analogRead(BATTERY_PIN);
+                        }
+                    #else
+                        #ifdef BATTERY_PIN
+                            sample = analogRead(BATTERY_PIN);
+                        #else
+                            sample = 0;
+                        #endif
+                    #endif
+                #endif                
                 sampleSum += sample;
                 delayMicroseconds(50); 
             }
@@ -60,15 +135,30 @@ namespace BATTERY_Utils {
                 #if defined(HELTEC_WIRELESS_TRACKER)
                     digitalWrite(ADC_CTRL, LOW);
                 #endif
-                #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3)
+                #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
                     digitalWrite(ADC_CTRL, HIGH);
                 #endif
+
+                #ifdef HELTEC_WP
+                double inputDivider = (1.0 / (10.0 + 10.0)) * 10.0;  // The voltage divider is a 10k + 10k resistor in series
+                #else
                 double inputDivider = (1.0 / (390.0 + 100.0)) * 100.0;  // The voltage divider is a 390k + 100k resistor in series, 100k on the low side.
+                #endif
                 return (((sampleSum/100) * adcReadingTransformation) / inputDivider) + 0.285; // Yes, this offset is excessive, but the ADC on the ESP32s3 is quite inaccurate and noisy. Adjust to own measurements.
             #else
-                return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection; // raw voltage without mapping
+                #ifdef HAS_ADC_CALIBRATION
+                    if (calibrationEnable){
+                        float voltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars);
+                        voltage *= 2;       // for 100K/100K voltage divider
+                        voltage /= 1000;
+                        return voltage;
+                    } else {
+                        return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection;  // raw voltage without mapping
+                    }
+                #else
+                    return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection;  // raw voltage without mapping
+                #endif
             #endif
-
             // return mapVoltage(voltage, 3.34, 4.71, 3.0, 4.2); // mapped voltage
         #endif
     }
@@ -77,14 +167,32 @@ namespace BATTERY_Utils {
         int sample;
         int sampleSum = 0;
         for (int i = 0; i < 100; i++) {
-            sample = analogRead(Config.battery.externalVoltagePin);
+            #ifdef HAS_ADC_CALIBRATION
+                if (calibrationEnable){
+                    sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
+                } else {
+                    sample = analogRead(Config.battery.externalVoltagePin);
+                }
+            #else
+                sample = analogRead(Config.battery.externalVoltagePin);
+            #endif
             sampleSum += sample;
-            delayMicroseconds(50); 
+            delayMicroseconds(50);
         }
 
-        float voltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * ((R1+R2)/R2)) - multiplyCorrection;
+        float extVoltage;
+        #ifdef HAS_ADC_CALIBRATION
+            if (calibrationEnable){       
+                extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars) * voltageDividerTransformation; // in mV
+                extVoltage /= 1000;
+            } else {
+                extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
+            }
+        #else
+            extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
+        #endif
         
-        return voltage; // raw voltage without mapping
+        return extVoltage; // raw voltage without mapping
 
         // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
     }
@@ -104,12 +212,57 @@ namespace BATTERY_Utils {
                 shouldSleepLowVoltage = true;
             }
         #endif
-        if (Config.battery.monitorExternalVoltage && checkExternalVoltage() < Config.battery.externalSleepVoltage + 0.1) {
-            shouldSleepLowVoltage = true;
-        }
+        #ifndef HELTEC_WP
+            if (Config.battery.monitorExternalVoltage && checkExternalVoltage() < Config.battery.externalSleepVoltage + 0.1) {
+                shouldSleepLowVoltage = true;
+            }
+        #endif
         if (shouldSleepLowVoltage) {
             Utils::checkSleepByLowBatteryVoltage(0);
         }
     }
 
+
+    String generateEncodedTelemetryBytes(float value, bool firstBytes, byte voltageType) {  // 0 = internal battery(0-4,2V) , 1 = external battery(0-15V)
+        String encodedBytes;
+        int tempValue;
+
+        if (firstBytes) {
+            tempValue = value;
+        } else {
+            switch (voltageType) {
+                case 0:
+                    tempValue = value * 100;           // Internal voltage calculation
+                    break;
+                case 1:
+                    tempValue = (value * 100) / 2;     // External voltage calculation
+                    break;
+                default:
+                    tempValue = value;
+                    break;
+            }
+        }        
+
+        int firstByte   = tempValue / 91;
+        tempValue       -= firstByte * 91;
+
+        encodedBytes    = char(firstByte + 33);
+        encodedBytes    += char(tempValue + 33);
+        return encodedBytes;
+    }
+
+
+    String generateEncodedTelemetry() {
+        String telemetry = "|";
+        telemetry += generateEncodedTelemetryBytes(telemetryCounter, true, 0);
+        telemetryCounter++;
+        if (telemetryCounter == 1000) {
+            telemetryCounter = 0;
+        }
+        if (Config.battery.sendInternalVoltage) telemetry += generateEncodedTelemetryBytes(checkInternalVoltage(), false, 0);
+        if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(checkExternalVoltage(), false, 1);
+        telemetry += "|";
+        return telemetry;
+    }
+
 }

src/battery_utils.h

@@ -6,11 +6,17 @@
 
 namespace BATTERY_Utils {
 
+    void    adcCalibration();
+    void    adcCalibrationCheck();
+    void    setup();
     float   checkInternalVoltage();
     float   checkExternalVoltage();
     void    checkIfShouldSleep(); // ????
     void    startupBatteryHealth();
 
+    String generateEncodedTelemetryBytes(float value, bool firstBytes, byte voltageType);
+    String generateEncodedTelemetry();
+
 }
 
 #endif

src/bme_utils.cpp

@@ -32,12 +32,12 @@ namespace BME_Utils {
     void getWxModuleAddres() {
         uint8_t err, addr;
         for(addr = 1; addr < 0x7F; addr++) {
-            #ifdef HELTEC_V3
-            Wire1.beginTransmission(addr);
-            err = Wire1.endTransmission();
+            #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+                Wire1.beginTransmission(addr);
+                err = Wire1.endTransmission();
             #else
-            Wire.beginTransmission(addr);
-            err = Wire.endTransmission();
+                Wire.beginTransmission(addr);
+                err = Wire.endTransmission();
             #endif
             if (err == 0) {
                 //Serial.println(addr); this shows any connected board to I2C
@@ -58,12 +58,12 @@ namespace BME_Utils {
             if (wxModuleAddress != 0x00) {
                 bool wxModuleFound = false;
                 if (wxModuleAddress == 0x76 || wxModuleAddress == 0x77) {
-                    #ifdef HELTEC_V3
-                    if (bme280.begin(wxModuleAddress, &Wire1)) {
-                        Serial.println("BME280 sensor found");
-                        wxModuleType = 1;
-                        wxModuleFound = true;
-                    }
+                    #if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+                        if (bme280.begin(wxModuleAddress, &Wire1)) {
+                            Serial.println("BME280 sensor found");
+                            wxModuleType = 1;
+                            wxModuleFound = true;
+                        }
                     #else
                         if (bme280.begin(wxModuleAddress)) {
                             Serial.println("BME280 sensor found");
@@ -93,7 +93,7 @@ namespace BME_Utils {
                     }
                 }                
                 if (!wxModuleFound) {
-                    show_display("ERROR", "", "BME/BMP/Si7021 sensor active", "but no sensor found...", 2000);
+                    displayShow("ERROR", "", "BME/BMP/Si7021 sensor active", "but no sensor found...", 2000);
                     Serial.println("BME/BMP/Si7021 sensor Active in config but not found! Check Wiring");
                 } else {
                     switch (wxModuleType) {
@@ -216,7 +216,7 @@ namespace BME_Utils {
         String wx;
         if (isnan(newTemp) || isnan(newHum) || isnan(newPress)) {
             Serial.println("BME/BMP/Si7021 Module data failed");
-            wx = ".../...g...t...r...p...P...h..b.....";
+            wx = ".../...g...t...";
             fifthLine = "";
             return wx;
         } else {
@@ -246,7 +246,7 @@ namespace BME_Utils {
 
             wx = ".../...g...t";
             wx += tempStr;
-            wx += "r...p...P...h";
+            wx += "h";
             wx += humStr;
             wx += "b";
             wx += presStr;

src/boards_pinout.h

@@ -18,7 +18,7 @@
     #define RADIO_BUSY_PIN  26      // GPIO26   - SX1278 IRQ ---->DIO0
 #endif
 
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS)
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_WS) || defined(HELTEC_WP)
     #define RADIO_SCLK_PIN  9   // SX1262 SCK
     #define RADIO_MISO_PIN  11  // SX1262 MISO
     #define RADIO_MOSI_PIN  10  // SX1262 MOSI
@@ -28,7 +28,7 @@
     #define RADIO_BUSY_PIN  13  // SX1262 BUSY
 #endif
 
-#if defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)    // Ebyte E22 400M30S (SX1268) or E22 900M30S (SX1262)
+#if defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68)   // Ebyte E22 400M30S (SX1268) or E22 900M30S (SX1262) or E220 LLCC68
     #define RADIO_SCLK_PIN  18
     #define RADIO_MISO_PIN  19
     #define RADIO_MOSI_PIN  23
@@ -40,6 +40,18 @@
     #define RADIO_TXEN      25
 #endif
 
+#if defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)  // https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.02-2LCD-FreePins
+    #define RADIO_SCLK_PIN  5
+    #define RADIO_MISO_PIN  19
+    #define RADIO_MOSI_PIN  27
+    #define RADIO_CS_PIN    18
+    #define RADIO_RST_PIN   23
+    #define RADIO_DIO1_PIN  33
+    #define RADIO_BUSY_PIN  32
+    #define RADIO_RXEN      14
+    #define RADIO_TXEN      13
+#endif
+
 #ifdef WEMOS_LOLIN32_OLED_DIY_LoRa
     #define RADIO_SCLK_PIN  15
     #define RADIO_MISO_PIN  13
@@ -72,7 +84,7 @@
     #define RADIO_TXEN          13
 #endif
 
-#ifdef HELTEC_HTCT62
+#if defined(HELTEC_HTCT62)
     #define RADIO_SCLK_PIN  10   // SX1262 SCK
     #define RADIO_MISO_PIN  6    // SX1262 MISO
     #define RADIO_MOSI_PIN  7    // SX1262 MOSI
@@ -120,21 +132,30 @@
     #define RADIO_TXEN          7
 #endif
 
+#ifdef WEMOS_S2_MINI_DIY_LoRa
+    #define RADIO_SCLK_PIN  36
+    #define RADIO_MISO_PIN  37
+    #define RADIO_MOSI_PIN  35
+    #define RADIO_CS_PIN    34
+    #define RADIO_BUSY_PIN  38
+    #define RADIO_RST_PIN   33
+#endif
+
 
 // OLED 
-#if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915)
+#if defined(TTGO_T_LORA32_V2_1) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa) || defined(TTGO_T_Beam_V1_0) || defined(TTGO_T_Beam_V1_2) || defined(TTGO_T_Beam_V1_0_SX1268) || defined(TTGO_T_Beam_V1_2_SX1262) || defined(OE5HWN_MeshCom) || defined(ESP32_DIY_LoRa_A7670) || defined(TTGO_T_LORA32_V2_1_915) || defined(ESP32_DIY_LoRa_915) || defined(TTGO_T_Beam_V1_0_915) || defined(TTGO_T_Beam_V1_2_915) || defined(ESP32_DIY_LoRa_A7670_915) || defined(ESP32_DIY_1W_LoRa_915) || defined(ESP32_DIY_1W_LoRa_LLCC68) || defined(ESP32_DIY_1W_LoRa_Mesh_V1_2)
     #define OLED_SDA    21
     #define OLED_SCL    22
     #define OLED_RST    -1      // Reset pin # (or -1 if sharing Arduino reset pin)
 #endif
 
-#ifdef HELTEC_V2
+#if defined(HELTEC_V2) || defined(HELTEC_WS)
     #define OLED_SDA    4
     #define OLED_SCL    15
     #define OLED_RST    16
 #endif
 
-#if defined(HELTEC_V3) || defined(HELTEC_WS)
+#if defined(HELTEC_V3)
     #define OLED_SDA    17
     #define OLED_SCL    18
     #define OLED_RST    21
@@ -146,14 +167,17 @@
     #define OLED_RST    -1
 #endif
 
-#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915)
-        #define HAS_DISPLAY
+#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa) && !defined(ESP32C3_DIY_1W_LoRa_915) && !defined(WEMOS_S2_MINI_DIY_LoRa)
+    #define HAS_DISPLAY
 #endif
 
 // Leds and other stuff
 #ifdef HELTEC_HTCT62
     #define BATTERY_PIN         1
 #endif
+#ifdef WEMOS_S2_MINI_DIY_LoRa
+    #define INTERNAL_LED_PIN    15
+#endif
 #if defined(TTGO_T_LORA32_V2_1) || defined(TTGO_T_LORA32_V2_1_915)
     #define INTERNAL_LED_PIN    25      // Green Led
     #define BATTERY_PIN         35
@@ -163,13 +187,16 @@
     #define BATTERY_PIN         37
     #define ADC_CTRL            21
 #endif
-#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WS)
+#if defined(HELTEC_V3) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY) || defined(HELTEC_WS)
     #define INTERNAL_LED_PIN    35
     #define BATTERY_PIN         1
     #define VEXT_CTRL           36
-    #define ADC_CTRL            37 // Heltec WSL_V3 just like Heltec WT
+    #define ADC_CTRL            37  
     #define BOARD_I2C_SDA       41
     #define BOARD_I2C_SCL       42
+    #ifdef HELTEC_WSL_V3_DISPLAY
+        #define OLED_RST    -1
+    #endif
 #endif
 
 #if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)
@@ -189,6 +216,21 @@
     #define BOARD_I2C_SCL       6
 #endif
 
+#ifdef HELTEC_WP
+    #define INTERNAL_LED_PIN    18
+    #define BATTERY_PIN         20
+    #define ADC_CTRL            19
+    #define VEXT_CTRL           45
+    #define BOARD_I2C_SDA       37
+    #define BOARD_I2C_SCL       36
+    #define EPAPER_BUSY         7
+    #define EPAPER_RST          6
+    #define EPAPER_DC           5
+    #define EPAPER_CS           4
+    #define EPAPER_SCL          3
+    #define EPAPER_SDA          2
+#endif
+
 #ifdef ESP32_C3_DIY_LoRa        // just testing!
     #define OLED_SDA         8
     #define OLED_SCL         9
@@ -201,6 +243,19 @@
     #define RADIO_IRQ_PIN    2
 #endif
 
+#if defined(ESP32_C3_OctopusLab_LoRa)
+    #define OLED_SDA            0
+    #define OLED_SCL            1
+    #define OLED_RST            -1
+    #define RADIO_SCLK_PIN      6
+    #define RADIO_MISO_PIN      4
+    #define RADIO_MOSI_PIN      7
+    #define RADIO_CS_PIN        5
+    #define RADIO_DIO1_PIN      3
+    #define RADIO_RST_PIN       -1
+    #define RADIO_BUSY_PIN      8
+#endif
+
 /* (Same pins for LILYGO LoRa32 and ESP32 Wroom Dev )
 SX1278-------------------> ESP32 ttgo-lora32-v21 and ESP32 WROOM Dev
 GND                         GND

src/configuration.cpp

@@ -4,16 +4,6 @@
 #include "display.h"
 
 
-void Configuration::check() {
-    if (reload) {
-        show_display("------- UPDATE ------", "config is old", "device will update", "and then reboot", 1000);
-        
-        writeFile();
-
-        ESP.restart();
-    }
-}
-
 void Configuration::writeFile() {
     Serial.println("Saving config..");
 
@@ -27,43 +17,43 @@ void Configuration::writeFile() {
         }
     }
 
-    data["wifi"]["autoAP"]["password"]      = wifiAutoAP.password;
-    data["wifi"]["autoAP"]["powerOff"]      = wifiAutoAP.powerOff;
+    data["wifi"]["autoAP"]["password"]          = wifiAutoAP.password;
+    data["wifi"]["autoAP"]["powerOff"]          = wifiAutoAP.powerOff;
 
-    data["callsign"]                        = callsign;
+    data["callsign"]                            = callsign;
 
-    data["aprs_is"]["active"]               = aprs_is.active;
-    data["aprs_is"]["passcode"]             = aprs_is.passcode;
-    data["aprs_is"]["server"]               = aprs_is.server;
-    data["aprs_is"]["port"]                 = aprs_is.port;
-    data["aprs_is"]["filter"]               = aprs_is.filter;
-    data["aprs_is"]["messagesToRF"]         = aprs_is.messagesToRF;
-    data["aprs_is"]["objectsToRF"]          = aprs_is.objectsToRF;
+    data["aprs_is"]["active"]                   = aprs_is.active;
+    data["aprs_is"]["passcode"]                 = aprs_is.passcode;
+    data["aprs_is"]["server"]                   = aprs_is.server;
+    data["aprs_is"]["port"]                     = aprs_is.port;
+    data["aprs_is"]["filter"]                   = aprs_is.filter;
+    data["aprs_is"]["messagesToRF"]             = aprs_is.messagesToRF;
+    data["aprs_is"]["objectsToRF"]              = aprs_is.objectsToRF;
 
-    data["beacon"]["comment"]               = beacon.comment;
-    data["beacon"]["interval"]              = beacon.interval;
-    data["beacon"]["latitude"]              = beacon.latitude;
-    data["beacon"]["longitude"]             = beacon.longitude;
-    data["beacon"]["overlay"]               = beacon.overlay;
-    data["beacon"]["symbol"]                = beacon.symbol;
-    data["beacon"]["sendViaAPRSIS"]         = beacon.sendViaAPRSIS;
-    data["beacon"]["sendViaRF"]             = beacon.sendViaRF;
-    data["beacon"]["path"]                  = beacon.path;
+    data["beacon"]["comment"]                   = beacon.comment;
+    data["beacon"]["interval"]                  = beacon.interval;
+    data["beacon"]["latitude"]                  = beacon.latitude;
+    data["beacon"]["longitude"]                 = beacon.longitude;
+    data["beacon"]["overlay"]                   = beacon.overlay;
+    data["beacon"]["symbol"]                    = beacon.symbol;
+    data["beacon"]["sendViaAPRSIS"]             = beacon.sendViaAPRSIS;
+    data["beacon"]["sendViaRF"]                 = beacon.sendViaRF;
+    data["beacon"]["path"]                      = beacon.path;
 
-    data["digi"]["mode"]                    = digi.mode;
+    data["digi"]["mode"]                        = digi.mode;
 
-    data["lora"]["rxFreq"]                  = loramodule.rxFreq;
-    data["lora"]["txFreq"]                  = loramodule.txFreq;
-    data["lora"]["spreadingFactor"]         = loramodule.spreadingFactor;
-    data["lora"]["signalBandwidth"]         = loramodule.signalBandwidth;
-    data["lora"]["codingRate4"]             = loramodule.codingRate4;
-    data["lora"]["power"]                   = loramodule.power;
-    data["lora"]["txActive"]                = loramodule.txActive;
-    data["lora"]["rxActive"]                = loramodule.rxActive;
+    data["lora"]["rxFreq"]                      = loramodule.rxFreq;
+    data["lora"]["txFreq"]                      = loramodule.txFreq;
+    data["lora"]["spreadingFactor"]             = loramodule.spreadingFactor;
+    data["lora"]["signalBandwidth"]             = loramodule.signalBandwidth;
+    data["lora"]["codingRate4"]                 = loramodule.codingRate4;
+    data["lora"]["power"]                       = loramodule.power;
+    data["lora"]["txActive"]                    = loramodule.txActive;
+    data["lora"]["rxActive"]                    = loramodule.rxActive;
 
-    data["display"]["alwaysOn"]             = display.alwaysOn;
-    data["display"]["timeout"]              = display.timeout;
-    data["display"]["turn180"]              = display.turn180;
+    data["display"]["alwaysOn"]                 = display.alwaysOn;
+    data["display"]["timeout"]                  = display.timeout;
+    data["display"]["turn180"]                  = display.turn180;
 
     data["battery"]["sendInternalVoltage"]      = battery.sendInternalVoltage;
     data["battery"]["monitorInternalVoltage"]   = battery.monitorInternalVoltage;
@@ -73,31 +63,41 @@ void Configuration::writeFile() {
     data["battery"]["externalVoltagePin"]       = battery.externalVoltagePin;
     data["battery"]["monitorExternalVoltage"]   = battery.monitorExternalVoltage;
     data["battery"]["externalSleepVoltage"]     = battery.externalSleepVoltage;
+    data["battery"]["voltageDividerR1"]         = battery.voltageDividerR1;
+    data["battery"]["voltageDividerR2"]         = battery.voltageDividerR2;
 
-    data["bme"]["active"]                   = bme.active;
-    data["bme"]["heightCorrection"]         = bme.heightCorrection;
-    data["bme"]["temperatureCorrection"]    = bme.temperatureCorrection;
+    data["battery"]["sendVoltageAsTelemetry"]   = battery.sendVoltageAsTelemetry;
+    
+    data["bme"]["active"]                       = bme.active;
+    data["bme"]["heightCorrection"]             = bme.heightCorrection;
+    data["bme"]["temperatureCorrection"]        = bme.temperatureCorrection;
 
-    data["syslog"]["active"]                = syslog.active;
-    data["syslog"]["server"]                = syslog.server;
-    data["syslog"]["port"]                  = syslog.port;
+    data["syslog"]["active"]                    = syslog.active;
+    data["syslog"]["server"]                    = syslog.server;
+    data["syslog"]["port"]                      = syslog.port;
 
-    data["tnc"]["enableServer"]             = tnc.enableServer;
-    data["tnc"]["enableSerial"]             = tnc.enableSerial;
-    data["tnc"]["acceptOwn"]                = tnc.acceptOwn;
+    data["tnc"]["enableServer"]                 = tnc.enableServer;
+    data["tnc"]["enableSerial"]                 = tnc.enableSerial;
+    data["tnc"]["acceptOwn"]                    = tnc.acceptOwn;
 
-    data["other"]["rebootMode"]             = rebootMode;
-    data["other"]["rebootModeTime"]         = rebootModeTime;
+    data["other"]["rebootMode"]                 = rebootMode;
+    data["other"]["rebootModeTime"]             = rebootModeTime;
 
-    data["ota"]["username"]                 = ota.username;
-    data["ota"]["password"]                 = ota.password;
+    data["ota"]["username"]                     = ota.username;
+    data["ota"]["password"]                     = ota.password;
 
     data["other"]["rememberStationTime"]        = rememberStationTime;
 
-    data["other"]["backupDigiMode"]         = backupDigiMode;    
+    data["other"]["backupDigiMode"]             = backupDigiMode;
 
-    data["other"]["lowPowerMode"]           = lowPowerMode;
-    data["other"]["lowVoltageCutOff"]       = lowVoltageCutOff;    
+    data["other"]["lowPowerMode"]               = lowPowerMode;
+    data["other"]["lowVoltageCutOff"]           = lowVoltageCutOff;
+
+    data["personalNote"]                        = personalNote;
+
+    data["webadmin"]["active"]                  = webadmin.active;
+    data["webadmin"]["username"]                = webadmin.username;
+    data["webadmin"]["password"]                = webadmin.password;
 
     serializeJson(data, configFile);
 
@@ -128,129 +128,86 @@ bool Configuration::readFile() {
             wifiAPs.push_back(wifiap);
         }
 
-        wifiAutoAP.password             = data["wifi"]["autoAP"]["password"].as<String>();
-        wifiAutoAP.powerOff             = data["wifi"]["autoAP"]["powerOff"].as<int>();
+        wifiAutoAP.password             = data["wifi"]["autoAP"]["password"] | "1234567890";
+        wifiAutoAP.powerOff             = data["wifi"]["autoAP"]["powerOff"] | 10;
 
-        callsign                        = data["callsign"].as<String>();
-        rememberStationTime             = data["other"]["rememberStationTime"].as<int>();
+        callsign                        = data["callsign"] | "NOCALL-10";
+        rememberStationTime             = data["other"]["rememberStationTime"] | 30;
 
-        battery.sendInternalVoltage     = data["battery"]["sendInternalVoltage"].as<bool>();
-        battery.monitorInternalVoltage  = data["battery"]["monitorInternalVoltage"].as<bool>();
-        battery.internalSleepVoltage    = data["battery"]["internalSleepVoltage"].as<float>();
-
-        battery.sendExternalVoltage     = data["battery"]["sendExternalVoltage"].as<bool>();
-        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"].as<int>();
-        battery.monitorExternalVoltage  = data["battery"]["monitorExternalVoltage"].as<bool>();
-        battery.externalSleepVoltage    = data["battery"]["externalSleepVoltage"].as<float>();
-
-        aprs_is.passcode                = data["aprs_is"]["passcode"].as<String>();
-        aprs_is.server                  = data["aprs_is"]["server"].as<String>();
-        aprs_is.port                    = data["aprs_is"]["port"].as<int>();
-
-        loramodule.spreadingFactor      = data["lora"]["spreadingFactor"].as<int>();
-        loramodule.signalBandwidth      = data["lora"]["signalBandwidth"].as<long>();
-        loramodule.codingRate4          = data["lora"]["codingRate4"].as<int>();
-        loramodule.power                = data["lora"]["power"].as<int>();
-
-        display.alwaysOn                = data["display"]["alwaysOn"].as<bool>();
-        display.timeout                 = data["display"]["timeout"].as<int>();
-        display.turn180                 = data["display"]["turn180"].as<bool>();
-
-        syslog.active                   = data["syslog"]["active"].as<bool>();
-        syslog.server                   = data["syslog"]["server"].as<String>();
-        syslog.port                     = data["syslog"]["port"].as<int>();
-
-        bme.active                      = data["bme"]["active"].as<bool>();
-        bme.heightCorrection            = data["bme"]["heightCorrection"].as<int>();
-        bme.temperatureCorrection       = data["bme"]["temperatureCorrection"].as<float>();
-
-        ota.username                    = data["ota"]["username"].as<String>();
-        ota.password                    = data["ota"]["password"].as<String>();
-
-        tnc.enableServer                = data["tnc"]["enableServer"].as<bool>();
-        tnc.enableSerial                = data["tnc"]["enableSerial"].as<bool>();
-        tnc.acceptOwn                   = data["tnc"]["acceptOwn"].as<bool>();
-
-        lowPowerMode                    = data["other"]["lowPowerMode"].as<bool>();
-        lowVoltageCutOff                = data["other"]["lowVoltageCutOff"].as<double>();
-
-        backupDigiMode                  = data["other"]["backupDigiMode"].as<bool>();
-
-        rebootMode                      = data["other"]["rebootMode"].as<bool>();
-        rebootModeTime                  = data["other"]["rebootModeTime"].as<int>();
-
-        int stationMode                 = data["stationMode"].as<int>(); // deprecated but need to specify config version
-
-        if (stationMode == 0) {
-            // Load new settings 
-
-            beacon.latitude                   = data["beacon"]["latitude"].as<double>();
-            beacon.longitude                  = data["beacon"]["longitude"].as<double>();
-            beacon.comment                    = data["beacon"]["comment"].as<String>();
-            beacon.overlay                    = data["beacon"]["overlay"].as<String>();
-            beacon.symbol                     = data["beacon"]["symbol"].as<String>();
-            beacon.interval                   = data["beacon"]["interval"].as<int>();
-            beacon.sendViaAPRSIS              = data["beacon"]["sendViaAPRSIS"].as<bool>();
-            beacon.sendViaRF                  = data["beacon"]["sendViaRF"].as<bool>();
-            beacon.path                       = data["beacon"]["path"].as<String>();
-
-            digi.mode                         = data["digi"]["mode"].as<int>();
-
-            aprs_is.active                    = data["aprs_is"]["active"].as<bool>();
-            aprs_is.filter                    = data["aprs_is"]["filter"].as<String>();
-            aprs_is.messagesToRF              = data["aprs_is"]["messagesToRF"].as<bool>();
-            aprs_is.objectsToRF               = data["aprs_is"]["objectsToRF"].as<bool>();
-
-            loramodule.txFreq                 = data["lora"]["txFreq"].as<long>();
-            loramodule.rxFreq                 = data["lora"]["rxFreq"].as<long>();
-            loramodule.txActive               = data["lora"]["txActive"].as<bool>();
-            loramodule.rxActive               = data["lora"]["rxActive"].as<bool>();
-        } else {
-            // Load old settings and put into new variables not actual config
-
-            String iGateComment             = data["iGateComment"].as<String>();
-            int beaconInterval              = data["other"]["beaconInterval"].as<int>();
-
-            long iGateFreq                  = data["lora"]["iGateFreq"].as<long>();
-            long digirepeaterTxFreq         = data["lora"]["digirepeaterTxFreq"].as<long>();
-            long digirepeaterRxFreq         = data["lora"]["digirepeaterRxFreq"].as<long>();
+        beacon.latitude                 = data["beacon"]["latitude"] | 0.0;
+        beacon.longitude                = data["beacon"]["longitude"] | 0.0;
+        beacon.comment                  = data["beacon"]["comment"] | "LoRa APRS";
+        beacon.interval                 = data["beacon"]["interval"] | 15;
+        beacon.overlay                  = data["beacon"]["overlay"] | "L";
+        beacon.symbol                   = data["beacon"]["symbol"] | "a";
+        beacon.path                     = data["beacon"]["path"] | "WIDE1-1";
+        beacon.sendViaAPRSIS            = data["beacon"]["sendViaAPRSIS"] | false;
+        beacon.sendViaRF                = data["beacon"]["sendViaRF"] | false;
         
-            String digiComment              = data["digi"]["comment"].as<String>();
-            double digiLatitude             = data["digi"]["latitude"].as<double>();
-            double digiLongitude            = data["digi"]["longitude"].as<double>();
+        aprs_is.active                  = data["aprs_is"]["active"] | false;
+        aprs_is.passcode                = data["aprs_is"]["passcode"] | "XYZWV";
+        aprs_is.server                  = data["aprs_is"]["server"] | "rotate.aprs2.net";
+        aprs_is.port                    = data["aprs_is"]["port"] | 14580;
+        aprs_is.filter                  = data["aprs_is"]["filter"] | "m/10";
+        aprs_is.messagesToRF            = data["aprs_is"]["messagesToRF"] | false;
+        aprs_is.objectsToRF             = data["aprs_is"]["objectsToRF"] | false;
+        
+        digi.mode                       = data["digi"]["mode"] | 0;
 
-            beacon.latitude = digiLatitude;
-            beacon.longitude = digiLongitude;
-            beacon.interval = beaconInterval;
+        loramodule.txFreq               = data["lora"]["txFreq"] | 433775000;
+        loramodule.rxFreq               = data["lora"]["rxFreq"] | 433775000;
+        loramodule.spreadingFactor      = data["lora"]["spreadingFactor"] | 12;
+        loramodule.signalBandwidth      = data["lora"]["signalBandwidth"] | 125000;
+        loramodule.codingRate4          = data["lora"]["codingRate4"] | 5;
+        loramodule.power                = data["lora"]["power"] | 20;
+        loramodule.txActive             = data["lora"]["txActive"] | false;
+        loramodule.rxActive             = data["lora"]["rxActive"] | false;
 
-            loramodule.txFreq = digirepeaterTxFreq;
-            loramodule.rxFreq = digirepeaterRxFreq;
-            loramodule.rxActive = true;
-            beacon.sendViaAPRSIS = true;
-            beacon.sendViaRF = false;
+        display.alwaysOn                = data["display"]["alwaysOn"] | true;
+        display.timeout                 = data["display"]["timeout"] | 4;
+        display.turn180                 = data["display"]["turn180"] | false;
 
-            switch (stationMode) {
-                case 1: // IGate only
-                // aprs_is.active = true; // better don't do that automatically
-                beacon.comment = iGateComment;
-                loramodule.rxFreq = iGateFreq;
-                break;
-                case 5: // Digi + IGate
-                case 2: // Digi + IGate
-                // aprs_is.active = true; // better don't do that automatically
-                // digi.mode = 2; // better don't do that automatically
-                beacon.comment = digiComment;
-                loramodule.rxFreq = iGateFreq;
-                break;
-                case 3: // Digi
-                case 4: // Digi
-                // digi.mode = 2; // better don't do that automatically
-                beacon.comment = digiComment;
-                break;
-            }
+        battery.sendInternalVoltage     = data["battery"]["sendInternalVoltage"] | false;
+        battery.monitorInternalVoltage  = data["battery"]["monitorInternalVoltage"] | false;
+        battery.internalSleepVoltage    = data["battery"]["internalSleepVoltage"] | 3.0;
 
-            reload = true;
-        }
+        battery.sendExternalVoltage     = data["battery"]["sendExternalVoltage"] | false;
+        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"] | 34;
+        battery.monitorExternalVoltage  = data["battery"]["monitorExternalVoltage"] | false;
+        battery.externalSleepVoltage    = data["battery"]["externalSleepVoltage"] | 10.9;
+        battery.voltageDividerR1        = data["battery"]["voltageDividerR1"] | 100.0;
+        battery.voltageDividerR2        = data["battery"]["voltageDividerR2"] | 27.0;
+
+        battery.sendVoltageAsTelemetry  = data["battery"]["sendVoltageAsTelemetry"] | true;
+
+        bme.active                      = data["bme"]["active"] | false;
+        bme.heightCorrection            = data["bme"]["heightCorrection"] | 0;
+        bme.temperatureCorrection       = data["bme"]["temperatureCorrection"] | 0.0;
+
+        syslog.active                   = data["syslog"]["active"] | false;
+        syslog.server                   = data["syslog"]["server"] | "192.168.0.100";
+        syslog.port                     = data["syslog"]["port"] | 514;
+
+        tnc.enableServer                = data["tnc"]["enableServer"] | false;
+        tnc.enableSerial                = data["tnc"]["enableSerial"] | false;
+        tnc.acceptOwn                   = data["tnc"]["acceptOwn"] | false;
+
+        ota.username                    = data["ota"]["username"] | "";
+        ota.password                    = data["ota"]["password"] | "";
+
+        webadmin.active                 = data["webadmin"]["active"] | false;
+        webadmin.username               = data["webadmin"]["username"] | "admin";
+        webadmin.password               = data["webadmin"]["password"] | "";
+
+        lowPowerMode                    = data["other"]["lowPowerMode"] | false;
+        lowVoltageCutOff                = data["other"]["lowVoltageCutOff"] | 0;
+
+        backupDigiMode                  = data["other"]["backupDigiMode"] | false;
+
+        rebootMode                      = data["other"]["rebootMode"] | false;
+        rebootModeTime                  = data["other"]["rebootModeTime"] | 6;
+
+        personalNote    	            = data["personalNote"] | "personal note here...";
 
         if (wifiAPs.size() == 0) { // If we don't have any WiFi's from config we need to add "empty" SSID for AUTO AP
             WiFi_AP wifiap;
@@ -269,69 +226,67 @@ bool Configuration::readFile() {
 }
     
 void Configuration::init() {
-    reload = false;
 
     WiFi_AP wifiap;
-    wifiap.ssid                 = "";
-    wifiap.password             = "";
+    wifiap.ssid                     = "";
+    wifiap.password                 = "";
 
     wifiAPs.push_back(wifiap);
 
-    wifiAutoAP.password         = "1234567890";
-    wifiAutoAP.powerOff         = 15;
+    wifiAutoAP.password             = "1234567890";
+    wifiAutoAP.powerOff             = 15;
 
-    callsign                    = "N0CALL";
+    callsign                        = "N0CALL-10";
 
-    beacon.comment              = "LoRa APRS"; // new
-    beacon.latitude             = 0.0; // new
-    beacon.longitude            = 0.0; // new
-    beacon.interval             = 15; // new
-    beacon.overlay              = "L"; // new
-    beacon.symbol               = "#"; // new
-    beacon.sendViaAPRSIS        = true; // new
-    beacon.sendViaRF            = false; // new
-    beacon.path                 = "WIDE1-1"; // new
+    beacon.comment                  = "LoRa APRS";
+    beacon.latitude                 = 0.0;
+    beacon.longitude                = 0.0;
+    beacon.interval                 = 15;
+    beacon.overlay                  = "L";
+    beacon.symbol                   = "a";
+    beacon.sendViaAPRSIS            = true;
+    beacon.sendViaRF                = false;
+    beacon.path                     = "WIDE1-1";
     
     digi.mode = 0;
 
-    tnc.enableServer            = false;
-    tnc.enableSerial            = false;
-    tnc.acceptOwn               = false;
+    tnc.enableServer                = false;
+    tnc.enableSerial                = false;
+    tnc.acceptOwn                   = false;
 
-    aprs_is.active              = false; // new
-    aprs_is.passcode            = "XYZVW";
-    aprs_is.server              = "rotate.aprs2.net";
-    aprs_is.port                = 14580;
-    aprs_is.filter              = "m/10"; // new
-    aprs_is.messagesToRF        = false;
-    aprs_is.objectsToRF         = false;
+    aprs_is.active                  = false;
+    aprs_is.passcode                = "XYZVW";
+    aprs_is.server                  = "rotate.aprs2.net";
+    aprs_is.port                    = 14580;
+    aprs_is.filter                  = "m/10";
+    aprs_is.messagesToRF            = false;
+    aprs_is.objectsToRF             = false;
 
-    loramodule.txFreq           = 433775000; // new
-    loramodule.rxFreq           = 433775000; // new
-    loramodule.spreadingFactor  = 12;
-    loramodule.signalBandwidth  = 125000;
-    loramodule.codingRate4      = 5;
-    loramodule.power            = 20;
-    loramodule.txActive         = false; // new
-    loramodule.rxActive         = true; // new
+    loramodule.txFreq               = 433775000;
+    loramodule.rxFreq               = 433775000;
+    loramodule.spreadingFactor      = 12;
+    loramodule.signalBandwidth      = 125000;
+    loramodule.codingRate4          = 5;
+    loramodule.power                = 20;
+    loramodule.txActive             = false;
+    loramodule.rxActive             = true;
 
-    display.alwaysOn            = true;
-    display.timeout             = 4;
-    display.turn180             = false;
+    display.alwaysOn                = true;
+    display.timeout                 = 4;
+    display.turn180                 = false;
 
-    syslog.active               = false;
-    syslog.server               = "192.168.0.100";
-    syslog.port                 = 514;
+    syslog.active                   = false;
+    syslog.server                   = "192.168.0.100";
+    syslog.port                     = 514;
 
-    bme.active                  = false;
-    bme.heightCorrection        = 0;
-    bme.temperatureCorrection   = 0.0;
+    bme.active                      = false;
+    bme.heightCorrection            = 0;
+    bme.temperatureCorrection       = 0.0;
 
-    ota.username                = "";
-    ota.password                = "";
+    ota.username                    = "";
+    ota.password                    = "";
 
-    
-    rememberStationTime         = 30;
+    rememberStationTime             = 30;
 
     battery.sendInternalVoltage     = false;
     battery.monitorInternalVoltage  = false;
@@ -340,15 +295,25 @@ void Configuration::init() {
     battery.sendExternalVoltage     = false;
     battery.externalVoltagePin      = 34;
     battery.monitorExternalVoltage  = false;
-    battery.externalSleepVoltage    = 3.0;
+    battery.externalSleepVoltage    = 10.9;
+    battery.voltageDividerR1        = 100.0;
+    battery.voltageDividerR2        = 27.0;
 
-    lowPowerMode                = false;
-    lowVoltageCutOff            = 0;
+    battery.sendVoltageAsTelemetry  = true;
 
-    backupDigiMode              = false;
+    lowPowerMode                    = false;
+    lowVoltageCutOff                = 0;
 
-    rebootMode                  = false;
-    rebootModeTime              = 0;
+    backupDigiMode                  = false;
+
+    rebootMode                      = false;
+    rebootModeTime                  = 0;
+
+    personalNote                    = "";
+
+    webadmin.active                 = false;
+    webadmin.username               = "admin";
+    webadmin.password               = "";
 
     Serial.println("All is Written!");
 }

src/configuration.h

@@ -75,6 +75,9 @@ public:
     int     externalVoltagePin;
     bool    monitorExternalVoltage;
     float   externalSleepVoltage;
+    float   voltageDividerR1;
+    float   voltageDividerR2;
+    bool    sendVoltageAsTelemetry;
 };
 
 class BME {
@@ -104,9 +107,15 @@ public:
     String  password;
 };
 
+class WEBADMIN {
+public:
+    bool    active;
+    String  username;
+    String  password;
+};
+
 class Configuration {
 public:
-    bool                    reload;     // ?
     String                  callsign;
     int                     rememberStationTime;
     bool                    lowPowerMode;
@@ -114,6 +123,7 @@ public:
     bool                    backupDigiMode;
     bool                    rebootMode;
     int                     rebootModeTime;
+    String                  personalNote;
     std::vector<WiFi_AP>    wifiAPs;
     WiFi_Auto_AP            wifiAutoAP;
     BEACON                  beacon;
@@ -126,10 +136,10 @@ public:
     SYSLOG                  syslog;
     TNC                     tnc;  
     OTA                     ota;
+    WEBADMIN                webadmin;
   
     void init();
     void writeFile();
-    void check();
     Configuration();
 
 private:

src/digi_utils.cpp

@@ -5,6 +5,7 @@
 #include "query_utils.h"
 #include "digi_utils.h"
 #include "wifi_utils.h"
+#include "lora_utils.h"
 #include "gps_utils.h"
 #include "display.h"
 #include "utils.h"
@@ -27,7 +28,21 @@ namespace DIGI_Utils {
     String buildPacket(const String& path, const String& packet, bool thirdParty) {
         String packetToRepeat = packet.substring(0, packet.indexOf(",") + 1);
         String tempPath = path;
-        tempPath.replace(Config.beacon.path, Config.callsign + "*");
+
+        if (path.indexOf("WIDE1-1") != -1 && (Config.digi.mode == 2 || Config.digi.mode == 3)) {
+            tempPath.replace("WIDE1-1", Config.callsign + "*");
+        } else if (path.indexOf("WIDE2-") != -1 && Config.digi.mode == 3) {
+            if (path.indexOf("*") != 1) {
+                tempPath.remove(path.indexOf("*"), 1);
+            }
+            if (path.indexOf("WIDE2-1") != -1) {
+                tempPath.replace("WIDE2-1", Config.callsign + "*");
+            } else if (path.indexOf("WIDE2-2") != -1) {
+                tempPath.replace("WIDE2-2", Config.callsign + "*,WIDE2-1");
+            } else {
+                return "";
+            }
+        }
         packetToRepeat += tempPath;
         if (thirdParty) {
             packetToRepeat += APRS_IS_Utils::checkForStartingBytes(packet.substring(packet.indexOf(":}")));
@@ -47,8 +62,21 @@ namespace DIGI_Utils {
         }
         if (temp.indexOf(",") > 2) { // checks for path
             const String& path = temp.substring(temp.indexOf(",") + 1); // after tocall
-            if (path.indexOf(Config.beacon.path) != -1) {
+            if ((Config.digi.mode == 2 || backUpDigiMode) && path.indexOf("WIDE1-1") != - 1) {
                 return buildPacket(path, packet, thirdParty);
+            } else if (Config.digi.mode == 3) {
+                int wide1Index = path.indexOf("WIDE1-1");
+                int wide2Index = path.indexOf("WIDE2-");
+
+                if (wide1Index != -1 && wide2Index != -1 && wide1Index < wide2Index) {  // WIDE1-1 && WIDE2-n
+                    return buildPacket(path, packet, thirdParty);
+                } else if (wide1Index != -1 && wide2Index == -1) {                      // only WIDE1-1
+                    return buildPacket(path, packet, thirdParty);
+                } else if (wide1Index == -1 && wide2Index != -1) {                      // only WIDE2-n
+                    return buildPacket(path, packet, thirdParty);
+                } else {
+                    return "";
+                }
             } else {
                 return "";
             }
@@ -75,7 +103,7 @@ namespace DIGI_Utils {
                     if (!thirdPartyPacket && !Utils::checkValidCallsign(Sender)) {
                         return;
                     }
-                    if (STATION_Utils::check25SegBuffer(Sender, temp.substring(temp.indexOf(":") + 2))) {
+                    if (STATION_Utils::check25SegBuffer(Sender, temp.substring(temp.indexOf(":") + 2)) || Config.lowPowerMode) {
                         STATION_Utils::updateLastHeard(Sender);
                         Utils::typeOfPacket(temp, 2);    // Digi
                         bool queryMessage = false;
@@ -84,14 +112,18 @@ namespace DIGI_Utils {
                             String Addressee            = AddresseeAndMessage.substring(0, AddresseeAndMessage.indexOf(":"));
                             Addressee.trim();
                             if (Addressee == Config.callsign) {     // it's a message for me!
-                                queryMessage = APRS_IS_Utils::processReceivedLoRaMessage(Sender, AddresseeAndMessage);
+                                queryMessage = APRS_IS_Utils::processReceivedLoRaMessage(Sender, AddresseeAndMessage, thirdPartyPacket);
                             }
                         }
                         if (!queryMessage) {
                             String loraPacket = generateDigiRepeatedPacket(packet.substring(3), thirdPartyPacket);
                             if (loraPacket != "") {
-                                STATION_Utils::addToOutputPacketBuffer(loraPacket);
-                                display_toggle(true);
+                                if (Config.lowPowerMode) {
+                                    LoRa_Utils::sendNewPacket(loraPacket);
+                                } else {
+                                    STATION_Utils::addToOutputPacketBuffer(loraPacket);
+                                }
+                                displayToggle(true);
                                 lastScreenOn = millis();
                             }
                         }

src/display.cpp

@@ -11,17 +11,25 @@
         TFT_eSPI tft = TFT_eSPI(); 
 
         #ifdef HELTEC_WIRELESS_TRACKER
-            #define bigSizeFont     2
-            #define smallSizeFont   1
-            #define lineSpacing     9
+            #define bigSizeFont     2.5
+            #define smallSizeFont   1.5
+            #define lineSpacing     12
         #endif
     #else
-        #include <Adafruit_GFX.h>
-        #include <Adafruit_SSD1306.h>
-        #if defined(HELTEC_V3)
-            #define OLED_DISPLAY_HAS_RST_PIN
+        #if HAS_EPAPER
+            //
+        #else
+            #include <Adafruit_GFX.h>
+            #include <Adafruit_SSD1306.h>
+            #if defined(HELTEC_V3) || defined(HELTEC_WS)
+                #define OLED_DISPLAY_HAS_RST_PIN
+            #endif
+            #ifdef HELTEC_WSL_V3_DISPLAY
+                Adafruit_SSD1306 display(128, 64, &Wire1, OLED_RST);
+            #else
+                Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
+            #endif
         #endif
-        Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
     #endif
 #endif
     
@@ -35,7 +43,7 @@ void cleanTFT() {
     #endif
 }
 
-void setup_display() {
+void displaySetup() {
     #ifdef HAS_DISPLAY
         delay(500);
         #ifdef HAS_TFT
@@ -48,47 +56,58 @@ void setup_display() {
             }
             tft.setTextFont(0);
             tft.fillScreen(TFT_BLACK);
-        #else    
-            #ifdef OLED_DISPLAY_HAS_RST_PIN
-                pinMode(OLED_RST, OUTPUT);
-                digitalWrite(OLED_RST, LOW);
-                delay(20);
-                digitalWrite(OLED_RST, HIGH);
-            #endif
-            Wire.begin(OLED_SDA, OLED_SCL);
+        #else
+            #if HAS_EPAPER
+                //
+            #else
+                #ifdef OLED_DISPLAY_HAS_RST_PIN
+                    pinMode(OLED_RST, OUTPUT);
+                    digitalWrite(OLED_RST, LOW);
+                    delay(20);
+                    digitalWrite(OLED_RST, HIGH);
+                #endif
 
-            if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { 
-                Serial.println(F("SSD1306 allocation failed"));
-                for(;;); // Don't proceed, loop forever
-            }
-            if (Config.display.turn180) {
-                display.setRotation(2);
-            }
-            display.clearDisplay();
-            display.setTextColor(WHITE);
-            display.setTextSize(1);
-            display.setCursor(0, 0);
-            display.ssd1306_command(SSD1306_SETCONTRAST);
-            display.ssd1306_command(1);
-            display.display();
+                if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { 
+                    Serial.println(F("SSD1306 allocation failed"));
+                    for(;;); // Don't proceed, loop forever
+                }
+                if (Config.display.turn180) {
+                    display.setRotation(2);
+                }
+                display.clearDisplay();
+                display.setTextColor(WHITE);
+                display.setTextSize(1);
+                display.setCursor(0, 0);
+                display.ssd1306_command(SSD1306_SETCONTRAST);
+                display.ssd1306_command(1);
+                display.display();
+            #endif
         #endif
         delay(1000);
     #endif
 }
 
-void display_toggle(bool toggle) {
+void displayToggle(bool toggle) {
     #ifdef HAS_DISPLAY
         if (toggle) {
             #ifdef HAS_TFT
                 digitalWrite(TFT_BL, HIGH);
             #else
-                display.ssd1306_command(SSD1306_DISPLAYON);
+                #if HAS_EPAPER
+                    // ... to be continued
+                #else
+                    display.ssd1306_command(SSD1306_DISPLAYON);
+                #endif
             #endif
         } else {
             #ifdef HAS_TFT
                 digitalWrite(TFT_BL, LOW);
             #else
-                display.ssd1306_command(SSD1306_DISPLAYOFF);
+                #if HAS_EPAPER
+                    // ... to be continued
+                #else
+                    display.ssd1306_command(SSD1306_DISPLAYOFF);
+                #endif
             #endif
         }
     #endif
@@ -121,7 +140,7 @@ bool shouldCleanTFT(const String& header, const String& line1, const String& lin
     }
 }
 
-void show_display(const String& header, const String& line1, const String& line2, const String& line3, int wait) {
+void displayShow(const String& header, const String& line1, const String& line2, const String& line3, int wait) {
     #ifdef HAS_DISPLAY
         const String* const lines[] = {&line1, &line2, &line3};
         #ifdef HAS_TFT
@@ -138,24 +157,28 @@ void show_display(const String& header, const String& line1, const String& line2
                 tft.print(*lines[i]);
             }
         #else
-            display.clearDisplay();
-            display.setTextColor(WHITE);
-            display.setTextSize(1);
-            display.setCursor(0, 0);
-            display.println(header);
-            for (int i = 0; i < 3; i++) {
-                display.setCursor(0, 8 + (8 * i));
-                display.println(*lines[i]);
-            }
-            display.ssd1306_command(SSD1306_SETCONTRAST);
-            display.ssd1306_command(1);
-            display.display();
+            #ifdef HAS_EPAPER
+                // ... to be continued
+            #else
+                display.clearDisplay();
+                display.setTextColor(WHITE);
+                display.setTextSize(1);
+                display.setCursor(0, 0);
+                display.println(header);
+                for (int i = 0; i < 3; i++) {
+                    display.setCursor(0, 8 + (8 * i));
+                    display.println(*lines[i]);
+                }
+                display.ssd1306_command(SSD1306_SETCONTRAST);
+                display.ssd1306_command(1);
+                display.display();
+            #endif
         #endif
         delay(wait);
     #endif
 }
 
-void show_display(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6, int wait) {
+void displayShow(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6, int wait) {
     #ifdef HAS_DISPLAY
         const String* const lines[] = {&line1, &line2, &line3, &line4, &line5, &line6};
         #ifdef HAS_TFT
@@ -172,19 +195,23 @@ void show_display(const String& header, const String& line1, const String& line2
                 tft.print(*lines[i]);
             }
         #else
-            display.clearDisplay();
-            display.setTextColor(WHITE);
-            display.setTextSize(2);
-            display.setCursor(0, 0);
-            display.println(header);
-            display.setTextSize(1);
-            for (int i = 0; i < 6; i++) {
-                display.setCursor(0, 16 + (8 * i));
-                display.println(*lines[i]);
-            }
-            display.ssd1306_command(SSD1306_SETCONTRAST);
-            display.ssd1306_command(1);
-            display.display();
+            #ifdef HAS_EPAPER
+                // ... to be continued
+            #else
+                display.clearDisplay();
+                display.setTextColor(WHITE);
+                display.setTextSize(2);
+                display.setCursor(0, 0);
+                display.println(header);
+                display.setTextSize(1);
+                for (int i = 0; i < 6; i++) {
+                    display.setCursor(0, 16 + (8 * i));
+                    display.println(*lines[i]);
+                }
+                display.ssd1306_command(SSD1306_SETCONTRAST);
+                display.ssd1306_command(1);
+                display.display();
+            #endif
         #endif
         delay(wait);
     #endif

src/display.h

@@ -6,13 +6,13 @@
 #define SCREEN_ADDRESS  0x3C    ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
 
 void cleanTFT();
-void setup_display();
-void display_toggle(bool toggle);
+void displaySetup();
+void displayToggle(bool toggle);
 
 bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3);
 bool shouldCleanTFT(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6);
 
-void show_display(const String& header, const String& line1, const String& line2, const String& line3, int wait = 0);
-void show_display(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6, int wait = 0);
+void displayShow(const String& header, const String& line1, const String& line2, const String& line3, int wait = 0);
+void displayShow(const String& header, const String& line1, const String& line2, const String& line3, const String& line4, const String& line5, const String& line6, int wait = 0);
 
 #endif

src/gps_utils.cpp

@@ -50,15 +50,20 @@ namespace GPS_Utils {
             encodedData += helper_base91[i];
         }
         encodedData += symbol;
-        encodedData += " x";
+        encodedData += "  ";
         encodedData += "\x47";
         return encodedData;
     }
 
     void generateBeacons() {
         if (Config.callsign.indexOf("NOCALL-10") != 0 && !Utils::checkValidCallsign(Config.callsign)) {
-            show_display("***** ERROR ******", "CALLSIGN = NOT VALID!", "    Use SSID 0-15", "  Or Valid Callsign", 0);
-            while (true) {}
+            displayShow("***** ERROR ******", "CALLSIGN = NOT VALID!", "", "Only Rx Mode Active", 3000);
+            Config.loramodule.txActive  = false;
+            Config.aprs_is.messagesToRF = false;
+            Config.aprs_is.objectsToRF  = false;
+            Config.beacon.sendViaRF     = false;
+            Config.digi.mode            = 0;
+            Config.backupDigiMode       = false;
         }   
         String beaconPacket = Config.callsign;
         beaconPacket += ">APLRG1";

src/lora_utils.cpp

@@ -18,18 +18,18 @@ bool transmitFlag    = true;
 #ifdef HAS_SX1262
     SX1262 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
 #endif
-
 #ifdef HAS_SX1268
     SX1268 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
 #endif
-
 #ifdef HAS_SX1278
     SX1278 radio = new Module(RADIO_CS_PIN, RADIO_BUSY_PIN, RADIO_RST_PIN);
 #endif
-
 #ifdef HAS_SX1276
     SX1276 radio = new Module(RADIO_CS_PIN, RADIO_BUSY_PIN, RADIO_RST_PIN);
 #endif
+#if defined(HAS_LLCC68)         //LLCC68 supports spreading factor only in range of 5-11!
+    LLCC68 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
+#endif
 
 int rssi, freqError;
 float snr;
@@ -43,14 +43,17 @@ namespace LoRa_Utils {
     void setup() {
         SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
         float freq = (float)Config.loramodule.rxFreq / 1000000;
+        #if defined(RADIO_HAS_XTAL)
+            radio.XTAL = true;
+        #endif
         int state = radio.begin(freq);
         if (state == RADIOLIB_ERR_NONE) {
             Utils::println("Initializing LoRa Module");
         } else {
-            Utils::println("Starting LoRa failed!");
+            Utils::println("Starting LoRa failed! State: " + String(state));
             while (true);
         }
-        #if defined(HAS_SX1262) || defined(HAS_SX1268)
+        #if defined(HAS_SX1262) || defined(HAS_SX1268) || defined(HAS_LLCC68)
             if (!Config.lowPowerMode) {
                 radio.setDio1Action(setFlag);
             } else {
@@ -70,7 +73,7 @@ namespace LoRa_Utils {
             radio.setRfSwitchPins(RADIO_RXEN, RADIO_TXEN);
         #endif
 
-        #ifdef HAS_1W_LORA  // Ebyte E22 400M30S (SX1268) / 900M30S (SX1262)
+        #ifdef HAS_1W_LORA  // Ebyte E22 400M30S (SX1268) / 900M30S (SX1262) / Ebyte E220 400M30S (LLCC68)
             state = radio.setOutputPower(Config.loramodule.power); // max value 20dB for 1W modules as they have Low Noise Amp
             radio.setCurrentLimit(140); // to be validated (100 , 120, 140)?
         #endif
@@ -83,14 +86,14 @@ namespace LoRa_Utils {
             radio.setCurrentLimit(140);
         #endif
 
-        #if defined(HAS_SX1262) || defined(HAS_SX1268)
+        #if defined(HAS_SX1262) || defined(HAS_SX1268) || defined(HAS_LLCC68)
             radio.setRxBoostedGainMode(true);
         #endif
 
         if (state == RADIOLIB_ERR_NONE) {
             Utils::println("init : LoRa Module    ...     done!");
         } else {
-            Utils::println("Starting LoRa failed!");
+            Utils::println("Starting LoRa failed! State: " + String(state));
             while (true);
         }
     }
@@ -157,9 +160,9 @@ namespace LoRa_Utils {
 
     String receivePacket() {
         String packet = "";
-        if (operationDone) {
+        if (operationDone || Config.lowPowerMode) {
             operationDone = false;
-            if (transmitFlag) {
+            if (transmitFlag && !Config.lowPowerMode) {
                 radio.startReceive();
                 transmitFlag = false;
             } else {

src/ota_utils.cpp

@@ -29,31 +29,31 @@ namespace OTA_Utils {
 
     void onOTAStart() {
         Serial.println("OTA update started!");
-        display_toggle(true);
+        displayToggle(true);
         lastScreenOn = millis();
-        show_display("", "", "", " OTA update started!", "", "", "", 1000);
+        displayShow("", "", "", " OTA update started!", "", "", "", 1000);
         isUpdatingOTA = true;
     }
 
     void onOTAProgress(size_t current, size_t final) {
         if (millis() - ota_progress_millis > 1000) {
-            display_toggle(true);
+            displayToggle(true);
             lastScreenOn = millis();
             ota_progress_millis = millis();
             Serial.printf("OTA Progress Current: %u bytes, Final: %u bytes\n", current, final);
-            show_display("", "", "  OTA Progress : " + String((current*100)/final) + "%", "", "", "", "", 100);
+            displayShow("", "", "  OTA Progress : " + String((current*100)/final) + "%", "", "", "", "", 100);
         }
     }
 
     void onOTAEnd(bool success) {
-        display_toggle(true);
+        displayToggle(true);
         lastScreenOn = millis();
         if (success) {
             Serial.println("OTA update finished successfully!");
-            show_display("", "", " OTA update success!", "", "    Rebooting ...", "", "", 4000);
+            displayShow("", "", " OTA update success!", "", "    Rebooting ...", "", "", 4000);
         } else {
             Serial.println("There was an error during OTA update!");
-            show_display("", "", " OTA update fail!", "", "", "", "", 4000);
+            displayShow("", "", " OTA update fail!", "", "", "", "", 4000);
         }
         isUpdatingOTA = false;
     }

src/power_utils.cpp

@@ -154,22 +154,29 @@ namespace POWER_Utils {
             #ifndef HELTEC_WSL_V3
                 digitalWrite(VEXT_CTRL, HIGH);
             #endif
+            #ifdef HELTEC_WP
+                digitalWrite(VEXT_CTRL, LOW);
+            #endif
         #endif
         
         #ifdef ADC_CTRL
             pinMode(ADC_CTRL, OUTPUT);
         #endif
 
-        #ifdef HELTEC_WIRELESS_TRACKER
+        #if defined(HELTEC_WIRELESS_TRACKER)
             Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
-        #ifdef HELTEC_V3
+        #if defined(HELTEC_V3) || defined(HELTEC_WP) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
             Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
+
+        #if defined(HELTEC_V3) || defined(HELTEC_WS)
+            Wire.begin(OLED_SDA, OLED_SCL);
+        #endif
         
         delay(1000);
-
+        BATTERY_Utils::setup();
         BATTERY_Utils::startupBatteryHealth();
     }
 

src/query_utils.cpp

@@ -1,70 +1,74 @@
 #include "configuration.h"
+#include "station_utils.h"
 #include "query_utils.h"
 #include "lora_utils.h"
 
-extern Configuration        Config;
-extern std::vector<String>  lastHeardStation;
-extern String               versionDate;
-extern int                  rssi;
-extern float                snr;
-extern int                  freqError;
+extern Configuration                    Config;
+extern std::vector<LastHeardStation>    lastHeardStations;
+extern String                           versionDate;
+extern int                              rssi;
+extern float                            snr;
+extern int                              freqError;
 
 
 namespace QUERY_Utils {
 
-    String process(const String& query, const String& station, const uint8_t queryOrigin) {
+    String process(const String& query, const String& station, bool queryFromAPRSIS, bool thirdParty) {
         String answer;
-        if (query=="?APRS?" || query=="?aprs?" || query=="?Aprs?" || query=="H" || query=="h" || query=="HELP" || query=="Help" || query=="help" || query=="?") {
+        String queryQuestion = query;
+        queryQuestion.toUpperCase();
+        if (queryQuestion == "?APRS?" || queryQuestion == "H" || queryQuestion == "HELP" || queryQuestion=="?") {
             answer.concat("?APRSV ?APRSP ?APRSL ?APRSH ?WHERE callsign");
-        } else if (query=="?APRSV" || query=="?aprsv" || query=="?Aprsv") {
-            answer = "CA2RXU_LoRa_iGate 1.3 v";
+        } else if (queryQuestion == "?APRSV") {
+            answer.concat("CA2RXU_LoRa_iGate 2.0 v");
             answer.concat(versionDate);
-        } else if (query=="?APRSP" || query=="?aprsp" || query=="?Aprsp") {
-            answer = "iGate QTH: ";
-            answer.concat(String(Config.beacon.latitude,2));
+        } else if (queryQuestion == "?APRSP") {
+            answer.concat("iGate QTH: ");
+            answer.concat(String(Config.beacon.latitude,3));
             answer.concat(" ");
-            answer.concat(String(Config.beacon.longitude,2));
-        } else if (query=="?APRSL" || query=="?aprsl" || query=="?Aprsl") {
-            if (lastHeardStation.size() == 0) {
+            answer.concat(String(Config.beacon.longitude,3));
+        } else if (queryQuestion == "?APRSL") {
+            if (lastHeardStations.size() == 0) {
                 char answerArray[50];
                 snprintf(answerArray, sizeof(answerArray), "No Station Listened in the last %d min.", Config.rememberStationTime);
                 answer.concat(answerArray);
             } else {
-                for (int i=0; i<lastHeardStation.size(); i++) {
-                    answer += lastHeardStation[i].substring(0,lastHeardStation[i].indexOf(",")) + " ";
+                for (int i=0; i<lastHeardStations.size(); i++) {
+                    answer += lastHeardStations[i].station + " ";
                 }
                 answer.trim();
             }
-        } else if (query=="?APRSSR" || query=="?aprssr" || query=="?Aprssr") {
+        } else if (queryQuestion == "?APRSSR") {
             char signalData[35];
             snprintf(signalData, sizeof(signalData), " %ddBm / %.2fdB / %dHz", rssi, snr, freqError);
             answer.concat(signalData);        
-        } else if (query.indexOf("?APRSH") == 0 || query.indexOf("?aprsh") == 0 || query.indexOf("?Aprsh") == 0) {
+        } else if (queryQuestion.indexOf("?APRSH") == 0) {
             // sacar callsign despues de ?APRSH
             Serial.println("escuchaste a X estacion? en las ultimas 24 o 8 horas?");
             answer.concat("?APRSH on development 73!");
-        } else if (query.indexOf("?WHERE") == 0) { 
+        } else if (queryQuestion.indexOf("?WHERE") == 0) { 
             // agregar callsign para completar donde esta X callsign --> posicion
             Serial.println("estaciones escuchadas directo (ultimos 30 min)");
             answer.concat("?WHERE on development 73!");
         }
+
+        String queryAnswer = Config.callsign;
+        queryAnswer += ">APLRG1";
+        if (queryFromAPRSIS) {
+            queryAnswer += ",TCPIP,qAC";
+        } else {
+            if (!thirdParty) queryAnswer += ",RFONLY";
+            if (Config.beacon.path != "") {
+                queryAnswer += ",";
+                queryAnswer += Config.beacon.path;
+            }
+        }
+        queryAnswer += "::";
+
         String processedStation = station;
         for (int i = station.length(); i < 9; i++) {
             processedStation += ' ';
         }
-        String queryAnswer = Config.callsign;
-        queryAnswer += ">APLRG1,";
-        if (queryOrigin == 1) { // from APRS-IS
-            queryAnswer += "TCPIP,qAC::";
-        } else {                // else == 0 , from LoRa
-            if (Config.beacon.path == "") {
-                queryAnswer += "RFONLY::";
-            } else {
-                queryAnswer += "RFONLY,";
-                queryAnswer += Config.beacon.path;
-                queryAnswer += "::";
-            }
-        }
         queryAnswer += processedStation;
         queryAnswer += ":";
         queryAnswer += answer;

src/query_utils.h

@@ -6,7 +6,7 @@
 
 namespace QUERY_Utils {
 
-    String process(const String& query, const String& station, const uint8_t queryOrigin);
+    String process(const String& query, const String& station, bool queryFromAPRSIS, bool thirdParty);
 
 }
 

src/station_utils.cpp

@@ -1,4 +1,5 @@
 #include "station_utils.h"
+#include "battery_utils.h"
 #include "aprs_is_utils.h"
 #include "configuration.h"
 #include "lora_utils.h"
@@ -8,27 +9,26 @@
 extern Configuration            Config;
 extern uint32_t                 lastRxTime;
 extern String                   fourthLine;
+extern bool                     shouldSleepLowVoltage;
 
 uint32_t lastTxTime             = millis();
-std::vector<String>             lastHeardStation;
+std::vector<LastHeardStation>   lastHeardStations;
 std::vector<String>             outputPacketBuffer;
-std::vector<String>             packet25SegBuffer;
+std::vector<Packet25SegBuffer>  packet25SegBuffer;
 
 
 namespace STATION_Utils {
 
     void deleteNotHeard() {
-        std::vector<String>  lastHeardStation_temp;
-        for (int i = 0; i < lastHeardStation.size(); i++) {
-            String deltaTimeString = lastHeardStation[i].substring(lastHeardStation[i].indexOf(",") + 1);
-            uint32_t deltaTime = deltaTimeString.toInt();
-            if ((millis() - deltaTime) < Config.rememberStationTime * 60 * 1000) {
-                lastHeardStation_temp.push_back(lastHeardStation[i]);
+        std::vector<LastHeardStation>  lastHeardStation_temp;
+        for (int i = 0; i < lastHeardStations.size(); i++) {
+            if (millis() - lastHeardStations[i].lastHeardTime < Config.rememberStationTime * 60 * 1000) {
+                lastHeardStation_temp.push_back(lastHeardStations[i]);
             }
         }
-        lastHeardStation.clear();
+        lastHeardStations.clear();
         for (int j = 0; j < lastHeardStation_temp.size(); j++) {
-            lastHeardStation.push_back(lastHeardStation_temp[j]);
+            lastHeardStations.push_back(lastHeardStation_temp[j]);
         }
         lastHeardStation_temp.clear();
     }
@@ -36,29 +36,32 @@ namespace STATION_Utils {
     void updateLastHeard(const String& station) {
         deleteNotHeard();
         bool stationHeard = false;
-        for (int i = 0; i < lastHeardStation.size(); i++) {
-            if (lastHeardStation[i].substring(0, lastHeardStation[i].indexOf(",")) == station) {
-                lastHeardStation[i] = station + "," + String(millis());
+        for (int i = 0; i < lastHeardStations.size(); i++) {
+            if (lastHeardStations[i].station == station) {
+                lastHeardStations[i].lastHeardTime = millis();
                 stationHeard = true;
             }
         }
         if (!stationHeard) {
-            lastHeardStation.push_back(station + "," + String(millis()));
+            LastHeardStation lastStation;
+            lastStation.lastHeardTime   = millis();
+            lastStation.station         = station;
+            lastHeardStations.push_back(lastStation);
         }
 
         fourthLine = "Stations (";
         fourthLine += String(Config.rememberStationTime);
         fourthLine += "min) = ";
-        if (lastHeardStation.size() < 10) {
+        if (lastHeardStations.size() < 10) {
             fourthLine += " ";
         }
-        fourthLine += String(lastHeardStation.size());
+        fourthLine += String(lastHeardStations.size());
     }
 
     bool wasHeard(const String& station) {
         deleteNotHeard();
-        for (int i = 0; i < lastHeardStation.size(); i++) {
-            if (lastHeardStation[i].substring(0, lastHeardStation[i].indexOf(",")) == station) {
+        for (int i = 0; i < lastHeardStations.size(); i++) {
+            if (lastHeardStations[i].station == station) {
                 Utils::println(" ---> Listened Station");
                 return true;
             }
@@ -69,35 +72,31 @@ namespace STATION_Utils {
 
     void clean25SegBuffer() {
         if (!packet25SegBuffer.empty()) {
-            String deltaTimeString = packet25SegBuffer[0].substring(0, packet25SegBuffer[0].indexOf(","));
-            uint32_t deltaTime = deltaTimeString.toInt();
-            if ((millis() - deltaTime) >  25 * 1000) {
+            if ((millis() - packet25SegBuffer[0].receivedTime) >  25 * 1000) {
                 packet25SegBuffer.erase(packet25SegBuffer.begin());
             }
         }
     }
 
     bool check25SegBuffer(const String& station, const String& textMessage) {
+        bool shouldBeIgnored = false;
         if (!packet25SegBuffer.empty()) {
-            bool shouldBeIgnored = false;
             for (int i = 0; i < packet25SegBuffer.size(); i++) {
-                const String& temp          = packet25SegBuffer[i].substring(packet25SegBuffer[i].indexOf(",") + 1);
-                const String& bufferStation = temp.substring(0, temp.indexOf(","));
-                const String& bufferMessage = temp.substring(temp.indexOf(",") + 1);
-                if (bufferStation == station && bufferMessage == textMessage) {
+                if (packet25SegBuffer[i].station == station && packet25SegBuffer[i].payload == textMessage) {
                     shouldBeIgnored = true;
                 }
             }
-            if (shouldBeIgnored) {
-                return false;
-            } else {
-                packet25SegBuffer.push_back(String(millis()) + "," + station + "," + textMessage);
-                return true;
-            }
+        }
+        if (shouldBeIgnored) {
+            return false;
         } else {
-            packet25SegBuffer.push_back(String(millis()) + "," + station + "," + textMessage);
+            Packet25SegBuffer packet;
+            packet.receivedTime = millis();
+            packet.station      = station;
+            packet.payload      = textMessage;
+            packet25SegBuffer.push_back(packet);
             return true;
-        }    
+        }
     }
 
     void processOutputPacketBuffer() {
@@ -109,6 +108,13 @@ namespace STATION_Utils {
             outputPacketBuffer.erase(outputPacketBuffer.begin());
             lastTxTime = millis();
         }
+        if (shouldSleepLowVoltage) {
+            while (outputPacketBuffer.size() > 0) {
+                LoRa_Utils::sendNewPacket(outputPacketBuffer[0]);
+                outputPacketBuffer.erase(outputPacketBuffer.begin());
+                delay(4000);
+            }
+        }
     }
 
     void addToOutputPacketBuffer(const String& packet) {

src/station_utils.h

@@ -1,9 +1,22 @@
 #ifndef STATION_UTILS_H_
 #define STATION_UTILS_H_
 
+
 #include <Arduino.h>
 
 
+struct Packet25SegBuffer {
+    uint32_t    receivedTime;
+    String      station;
+    String      payload;
+};
+
+struct LastHeardStation {
+    uint32_t    lastHeardTime;
+    String      station;
+};
+
+
 namespace STATION_Utils {
 
     void deleteNotHeard();

src/tnc_utils.cpp

@@ -29,7 +29,7 @@ namespace TNC_Utils {
     }
 
     void checkNewClients() {
-        WiFiClient new_client = tncServer.available();
+        WiFiClient new_client = tncServer.accept();
         if (new_client.connected()) {
             for (int i = 0; i < MAX_CLIENTS; i++) {
                 WiFiClient* client = clients[i];

src/utils.cpp

@@ -25,7 +25,6 @@ extern String               sixthLine;
 extern String               seventhLine;
 extern String               iGateBeaconPacket;
 extern String               iGateLoRaBeaconPacket;
-extern std::vector<String>  lastHeardStation;
 extern int                  rssi;
 extern float                snr;
 extern int                  freqError;
@@ -36,7 +35,10 @@ extern bool                 backUpDigiMode;
 extern bool                 shouldSleepLowVoltage;
 extern bool                 transmitFlag;
 
+extern std::vector<LastHeardStation>    lastHeardStations;
+
 bool        statusAfterBoot     = true;
+bool        sendStartTelemetry  = true;
 bool        beaconUpdate        = true;
 uint32_t    lastBeaconTx        = 0;
 uint32_t    lastScreenOn        = millis();
@@ -60,7 +62,6 @@ namespace Utils {
             statusAfterBoot = false;
         }
         if (statusAfterBoot && !Config.beacon.sendViaAPRSIS && Config.beacon.sendViaRF) {
-            delay(2000);
             status.concat(":>https://github.com/richonguzman/LoRa_APRS_iGate ");
             status.concat(versionDate);
             STATION_Utils::addToOutputPacketBuffer(status);
@@ -79,12 +80,12 @@ namespace Utils {
     }
 
     void setupDisplay() {
-        setup_display();
+        displaySetup();
         #ifdef INTERNAL_LED_PIN
             digitalWrite(INTERNAL_LED_PIN,HIGH);
         #endif
         Serial.println("\nStarting Station: " + Config.callsign + "   Version: " + versionDate);
-        show_display(" LoRa APRS", "", "   ( iGATE & DIGI )", "", "", "Richonguzman / CA2RXU", "      " + versionDate, 4000);
+        displayShow(" LoRa APRS", "", "", "   ( iGATE & DIGI )", "", "" , "  CA2RXU  " + versionDate, 4000);
         #ifdef INTERNAL_LED_PIN
             digitalWrite(INTERNAL_LED_PIN,LOW);
         #endif
@@ -96,12 +97,82 @@ namespace Utils {
         fourthLine = "Stations (";
         fourthLine.concat(String(Config.rememberStationTime));
         fourthLine.concat("min) = ");
-        if (lastHeardStation.size() < 10) {
+        if (lastHeardStations.size() < 10) {
             fourthLine += " ";
         }
-        fourthLine.concat(String(lastHeardStation.size()));
+        fourthLine.concat(String(lastHeardStations.size()));
     }
 
+
+    void sendInitialTelemetryPackets() {
+        String sender = Config.callsign;
+        for (int i = sender.length(); i < 9; i++) {
+            sender += ' ';
+        }
+        String baseAPRSISTelemetryPacket = Config.callsign;
+        baseAPRSISTelemetryPacket += ">APLRG1,TCPIP,qAC::";
+        baseAPRSISTelemetryPacket += sender;
+        baseAPRSISTelemetryPacket += ":";
+
+        String baseRFTelemetryPacket = Config.callsign;
+        baseRFTelemetryPacket += ">APLRG1,WIDE1-1::";
+        baseRFTelemetryPacket += sender;
+        baseRFTelemetryPacket += ":";
+
+
+        String telemetryPacket1 = "EQNS.";
+        if (Config.battery.sendInternalVoltage) {
+            telemetryPacket1 += "0,0.01,0";
+        }
+        if (Config.battery.sendExternalVoltage) {
+            telemetryPacket1 += String(Config.battery.sendInternalVoltage ? "," : "") + "0,0.02,0";
+        }
+
+        String telemetryPacket2 = "UNIT.";
+        if (Config.battery.sendInternalVoltage) {
+            telemetryPacket2 += "VDC";
+        }
+        if (Config.battery.sendExternalVoltage) {
+            telemetryPacket2 += String(Config.battery.sendInternalVoltage ? "," : "") + "VDC";
+        }
+
+        String telemetryPacket3 = "PARM.";
+        if (Config.battery.sendInternalVoltage) {
+            telemetryPacket3 += "V_Batt";
+        }
+        if (Config.battery.sendExternalVoltage) {
+            telemetryPacket3 += String(Config.battery.sendInternalVoltage ? "," : "") + "V_Ext";
+        }
+
+        if (Config.beacon.sendViaAPRSIS) {
+            #ifdef HAS_A7670
+                A7670_Utils::uploadToAPRSIS(baseAPRSISTelemetryPacket + telemetryPacket1);
+                delay(300);
+                A7670_Utils::uploadToAPRSIS(baseAPRSISTelemetryPacket + telemetryPacket2);
+                delay(300);
+                A7670_Utils::uploadToAPRSIS(baseAPRSISTelemetryPacket + telemetryPacket3);
+                delay(300);
+            #else
+                APRS_IS_Utils::upload(baseAPRSISTelemetryPacket + telemetryPacket1);
+                delay(300);
+                APRS_IS_Utils::upload(baseAPRSISTelemetryPacket + telemetryPacket2);
+                delay(300);
+                APRS_IS_Utils::upload(baseAPRSISTelemetryPacket + telemetryPacket3);
+                delay(300);
+            #endif
+            delay(300);
+        } else if (Config.beacon.sendViaRF) {
+            LoRa_Utils::sendNewPacket(baseRFTelemetryPacket + telemetryPacket1);
+            delay(3000);
+            LoRa_Utils::sendNewPacket(baseRFTelemetryPacket + telemetryPacket2);
+            delay(3000);
+            LoRa_Utils::sendNewPacket(baseRFTelemetryPacket + telemetryPacket3);
+            delay(3000);
+        }
+        sendStartTelemetry = false;
+    }            
+
+
     void checkBeaconInterval() {
         uint32_t lastTx = millis() - lastBeaconTx;
         if (lastBeaconTx == 0 || lastTx >= Config.beacon.interval * 60 * 1000) {
@@ -110,10 +181,13 @@ namespace Utils {
 
         if (beaconUpdate) {
             if (!Config.display.alwaysOn && Config.display.timeout != 0) {
-                display_toggle(true);
+                displayToggle(true);
             }
-            Utils::println("-- Sending Beacon to APRSIS --");
 
+            if (sendStartTelemetry && Config.battery.sendVoltageAsTelemetry && !Config.bme.active && (Config.battery.sendInternalVoltage || Config.battery.sendExternalVoltage)) {
+                sendInitialTelemetryPackets();
+            }
+            
             STATION_Utils::deleteNotHeard();
 
             activeStations();
@@ -125,8 +199,8 @@ namespace Utils {
                 beaconPacket += sensorData;
                 secondaryBeaconPacket += sensorData;
             } else if (Config.bme.active && wxModuleType == 0) {
-                beaconPacket += ".../...g...t...r...p...P...h..b.....";
-                secondaryBeaconPacket += ".../...g...t...r...p...P...h..b.....";
+                beaconPacket += ".../...g...t...";
+                secondaryBeaconPacket += ".../...g...t...";
             }
             beaconPacket            += Config.beacon.comment;
             secondaryBeaconPacket   += Config.beacon.comment;
@@ -134,45 +208,60 @@ namespace Utils {
             #if defined(BATTERY_PIN) || defined(HAS_AXP192) || defined(HAS_AXP2101)
                 if (Config.battery.sendInternalVoltage || Config.battery.monitorInternalVoltage) {
                     float internalVoltage       = BATTERY_Utils::checkInternalVoltage();
-                    String internalVoltageInfo  = String(internalVoltage,2) + "V";
-                    if (Config.battery.sendInternalVoltage) {
-                        beaconPacket            += " Batt=";
-                        beaconPacket            += internalVoltageInfo;
-                        secondaryBeaconPacket   += " Batt=";
-                        secondaryBeaconPacket   += internalVoltageInfo;
-                        sixthLine               = "    (Batt=";
-                        sixthLine               += internalVoltageInfo;
-                        sixthLine               += ")";
-                    }
                     if (Config.battery.monitorInternalVoltage && internalVoltage < Config.battery.internalSleepVoltage) {
                         beaconPacket            += " **IntBatWarning:SLEEP**";
                         secondaryBeaconPacket   += " **IntBatWarning:SLEEP**";
                         shouldSleepLowVoltage   = true;
+                    }
+
+                    String internalVoltageInfo  = String(internalVoltage,2) + "V";
+                    if (Config.battery.sendInternalVoltage) {
+                        sixthLine               = "    (Batt=";
+                        sixthLine               += internalVoltageInfo;
+                        sixthLine               += ")";
+                        if (!Config.battery.sendVoltageAsTelemetry) {
+                            beaconPacket            += " Batt=";
+                            beaconPacket            += internalVoltageInfo;
+                            secondaryBeaconPacket   += " Batt=";
+                            secondaryBeaconPacket   += internalVoltageInfo;
+                        }
+                    }      
+                }
+            #endif
+
+            #ifndef HELTEC_WP
+                if (Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) {
+                    float externalVoltage       = BATTERY_Utils::checkExternalVoltage();
+                    if (Config.battery.monitorExternalVoltage && externalVoltage < Config.battery.externalSleepVoltage) {
+                        beaconPacket            += " **ExtBatWarning:SLEEP**";
+                        secondaryBeaconPacket   += " **ExtBatWarning:SLEEP**";
+                        shouldSleepLowVoltage   = true;
+                    }
+
+                    String externalVoltageInfo  = String(externalVoltage,2) + "V";
+                    if (Config.battery.sendExternalVoltage) {
+                        sixthLine               = "    (Ext V=";
+                        sixthLine               += externalVoltageInfo;
+                        sixthLine               += ")";
+                        if (!Config.battery.sendVoltageAsTelemetry) {
+                            beaconPacket            += " Ext=";
+                            beaconPacket            += externalVoltageInfo;
+                            secondaryBeaconPacket   += " Ext=";
+                            secondaryBeaconPacket   += externalVoltageInfo;
+                        }                        
                     }                    
                 }
             #endif
 
-            if (Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) {
-                float externalVoltage       = BATTERY_Utils::checkExternalVoltage();
-                String externalVoltageInfo  = String(externalVoltage,2) + "V";
-                if (Config.battery.sendExternalVoltage) {
-                    beaconPacket            += " Ext=";
-                    beaconPacket            += externalVoltageInfo;
-                    secondaryBeaconPacket   += " Ext=";
-                    secondaryBeaconPacket   += externalVoltageInfo;
-                    sixthLine               = "    (Ext V=";
-                    sixthLine               += externalVoltageInfo;
-                    sixthLine               += ")";
-                }
-                if (Config.battery.monitorExternalVoltage && externalVoltage < Config.battery.externalSleepVoltage) {
-                    beaconPacket            += " **ExtBatWarning:SLEEP**";
-                    secondaryBeaconPacket   += " **ExtBatWarning:SLEEP**";
-                    shouldSleepLowVoltage   = true;
-                }
+            if (Config.battery.sendVoltageAsTelemetry && !Config.bme.active && (Config.battery.sendInternalVoltage || Config.battery.sendExternalVoltage)){
+                String encodedTelemetry = BATTERY_Utils::generateEncodedTelemetry();
+                beaconPacket += encodedTelemetry;
+                secondaryBeaconPacket += encodedTelemetry;
             }
 
             if (Config.aprs_is.active && Config.beacon.sendViaAPRSIS && !backUpDigiMode) {
-                show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING IGATE BEACON", 0); 
+                Utils::println("-- Sending Beacon to APRSIS --");
+                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING IGATE BEACON", 0); 
                 seventhLine = "     listening...";
                 #ifdef HAS_A7670
                     A7670_Utils::uploadToAPRSIS(beaconPacket);
@@ -182,7 +271,8 @@ namespace Utils {
             }
 
             if (Config.beacon.sendViaRF || backUpDigiMode) {
-                show_display(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING DIGI BEACON", 0);
+                Utils::println("-- Sending Beacon to RF --");
+                displayShow(firstLine, secondLine, thirdLine, fourthLine, fifthLine, sixthLine, "SENDING DIGI BEACON", 0);
                 seventhLine = "     listening...";
                 STATION_Utils::addToOutputPacketBuffer(secondaryBeaconPacket);
             }
@@ -200,14 +290,14 @@ namespace Utils {
     void checkDisplayInterval() {
         uint32_t lastDisplayTime = millis() - lastScreenOn;
         if (!Config.display.alwaysOn && lastDisplayTime >= Config.display.timeout * 1000) {
-            display_toggle(false);
+            displayToggle(false);
         }
     }
 
     void validateFreqs() {
         if (Config.loramodule.txFreq != Config.loramodule.rxFreq && abs(Config.loramodule.txFreq - Config.loramodule.rxFreq) < 125000) {
             Serial.println("Tx Freq less than 125kHz from Rx Freq ---> NOT VALID");
-            show_display("Tx Freq is less than ", "125kHz from Rx Freq", "device will autofix", "and then reboot", 1000);
+            displayShow("Tx Freq is less than ", "125kHz from Rx Freq", "device will autofix", "and then reboot", 1000);
             Config.loramodule.txFreq = Config.loramodule.rxFreq; // Inform about that but then change the TX QRG to RX QRG and reset the device
             Config.writeFile();
             ESP.restart();
@@ -244,7 +334,7 @@ namespace Utils {
         } else if (packet[firstColonIndex + 1] == '>') {
             sixthLine += "> NEW STATUS";
             seventhLine = seventhLineHelper;
-        } else if (packet[firstColonIndex + 1] == '!' || packet[firstColonIndex + 1] == '=') {
+        } else if (packet[firstColonIndex + 1] == '!' || packet[firstColonIndex + 1] == '=' || packet[firstColonIndex + 1] == '@') {
             sixthLine += "> GPS BEACON";
             if (!Config.syslog.active) {
                 GPS_Utils::getDistanceAndComment(packet);       // to be checked!!!
@@ -263,7 +353,7 @@ namespace Utils {
             seventhLine += "D:";
             seventhLine += distance;
             seventhLine += "km";
-        } else if (packet[firstColonIndex + 1] == '`') {
+        } else if (packet[firstColonIndex + 1] == '`' || packet[firstColonIndex + 1] == '\'') {
             sixthLine += ">  MIC-E";
             seventhLine = seventhLineHelper;
         } else if (packet[firstColonIndex + 1] == ';') {
@@ -307,13 +397,13 @@ namespace Utils {
 
     void checkSleepByLowBatteryVoltage(uint8_t mode) {
         if (shouldSleepLowVoltage) {
-            if (mode == 0) {
+            if (mode == 0) {    // at startup
                 delay(3000);
             }
             Serial.println("\n\n*** Sleeping Low Battey Voltage ***\n\n");
             esp_sleep_enable_timer_wakeup(30 * 60 * 1000000); // sleep 30 min
-            if (mode == 1) {
-                display_toggle(false);
+            if (mode == 1) {    // low voltage detected after a while
+                displayToggle(false);
             }
             #ifdef VEXT_CTRL
                 #ifndef HELTEC_WSL_V3
@@ -348,17 +438,21 @@ namespace Utils {
             cleanCallsign = " " + cleanCallsign;    // A0AA --> _A0AA
         }
 
-        if (!isDigit(cleanCallsign[2]) || !isAlpha(cleanCallsign[3])) return false; // __0A must be validated
+        if (!isDigit(cleanCallsign[2]) || !isAlpha(cleanCallsign[3])) {     // __0A__ must be validated
+            if (cleanCallsign[0] != 'R' && !isDigit(cleanCallsign[1]) && !isAlpha(cleanCallsign[2])) return false;    // to accepto R0A___
+        }
 
         bool isValid = false;
         if ((isAlphaNumeric(cleanCallsign[0]) || cleanCallsign[0] == ' ') && isAlpha(cleanCallsign[1])) {
             isValid = true;     //  AA0A (+A+A) + _A0AA (+A) + 0A0A (+A+A)
         } else if (isAlpha(cleanCallsign[0]) && isDigit(cleanCallsign[1])) {
             isValid = true;     //  A00A (+A+A)
+        } else if (cleanCallsign[0] == 'R' && cleanCallsign.length() == 6 && isDigit(cleanCallsign[1]) && isAlpha(cleanCallsign[2]) && isAlpha(cleanCallsign[3]) && isAlpha(cleanCallsign[4])) {
+            isValid = true;     //  R0AA (+A+A)
         }
         if (!isValid) return false;   // also 00__ avoided
 
-        if (cleanCallsign.length() > 4) {
+        if (cleanCallsign.length() > 4) {   // to validate ____AA
             for (int i = 5; i <= cleanCallsign.length(); i++) {
                 if (!isAlpha(cleanCallsign[i - 1])) return false;
             }

src/web_utils.cpp

@@ -29,6 +29,10 @@ extern const char web_bootstrap_js[] asm("_binary_data_embed_bootstrap_js_gz_sta
 extern const char web_bootstrap_js_end[] asm("_binary_data_embed_bootstrap_js_gz_end");
 extern const size_t web_bootstrap_js_len = web_bootstrap_js_end - web_bootstrap_js;
 
+// Declare external symbols for the embedded image data
+extern const unsigned char favicon_data[] asm("_binary_data_embed_favicon_png_gz_start");
+extern const unsigned char favicon_data_end[] asm("_binary_data_embed_favicon_png_gz_end");
+extern const size_t favicon_data_len = favicon_data_end - favicon_data;
 
 namespace WEB_Utils {
 
@@ -45,12 +49,24 @@ namespace WEB_Utils {
     }
 
     void handleHome(AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/html", (const uint8_t*)web_index_html, web_index_html_len);
+        if(Config.webadmin.active && !request->authenticate(Config.webadmin.username.c_str(), Config.webadmin.password.c_str()))
+            return request->requestAuthentication();
+
+        AsyncWebServerResponse *response = request->beginResponse(200, "text/html", (const uint8_t*)web_index_html, web_index_html_len);
+        response->addHeader("Content-Encoding", "gzip");
+        request->send(response);
+    }
+
+    void handleFavicon(AsyncWebServerRequest *request) {
+        AsyncWebServerResponse *response = request->beginResponse(200, "image/x-icon", (const uint8_t*)favicon_data, favicon_data_len);
         response->addHeader("Content-Encoding", "gzip");
         request->send(response);
     }
 
     void handleReadConfiguration(AsyncWebServerRequest *request) {
+        if(Config.webadmin.active && !request->authenticate(Config.webadmin.username.c_str(), Config.webadmin.password.c_str()))
+            return request->requestAuthentication();
+
         File file = SPIFFS.open("/igate_conf.json");
         
         String fileContent;
@@ -141,16 +157,19 @@ namespace WEB_Utils {
 
         Config.battery.sendInternalVoltage      = request->hasParam("battery.sendInternalVoltage", true);
         Config.battery.monitorInternalVoltage   = request->hasParam("battery.monitorInternalVoltage", true);
-        Config.battery.internalSleepVoltage = request->getParam("battery.internalSleepVoltage", true)->value().toFloat();
+        Config.battery.internalSleepVoltage     = request->getParam("battery.internalSleepVoltage", true)->value().toFloat();
 
         Config.battery.sendExternalVoltage      = request->hasParam("battery.sendExternalVoltage", true);
         if (Config.battery.sendExternalVoltage) {
             Config.battery.externalVoltagePin   = request->getParam("battery.externalVoltagePin", true)->value().toInt();
+            Config.battery.voltageDividerR1           = request->getParam("battery.voltageDividerR1", true)->value().toFloat();
+            Config.battery.voltageDividerR2           = request->getParam("battery.voltageDividerR2", true)->value().toFloat();
         }
         Config.battery.monitorExternalVoltage   = request->hasParam("battery.monitorExternalVoltage", true);
-        Config.battery.externalSleepVoltage = request->getParam("battery.externalSleepVoltage", true)->value().toFloat();
-
+        Config.battery.externalSleepVoltage     = request->getParam("battery.externalSleepVoltage", true)->value().toFloat();
 
+        Config.battery.sendVoltageAsTelemetry   = request->hasParam("battery.sendVoltageAsTelemetry", true);
+        
         Config.bme.active                   = request->hasParam("bme.active", true);
         Config.bme.heightCorrection         = request->getParam("bme.heightCorrection", true)->value().toInt();
         Config.bme.temperatureCorrection    = request->getParam("bme.temperatureCorrection", true)->value().toFloat();
@@ -158,42 +177,42 @@ namespace WEB_Utils {
             Config.beacon.symbol = "_";
         }
 
-
         Config.syslog.active                = request->hasParam("syslog.active", true);
         if (Config.syslog.active) {
-            Config.syslog.server    = request->getParam("syslog.server", true)->value();
-            Config.syslog.port      = request->getParam("syslog.port", true)->value().toInt();
+            Config.syslog.server            = request->getParam("syslog.server", true)->value();
+            Config.syslog.port              = request->getParam("syslog.port", true)->value().toInt();
         }
         
+        Config.tnc.enableServer             = request->hasParam("tnc.enableServer", true);
+        Config.tnc.enableSerial             = request->hasParam("tnc.enableSerial", true);
+        Config.tnc.acceptOwn                = request->hasParam("tnc.acceptOwn", true);
 
-        Config.tnc.enableServer         = request->hasParam("tnc.enableServer", true);
-        Config.tnc.enableSerial         = request->hasParam("tnc.enableSerial", true);
-        Config.tnc.acceptOwn            = request->hasParam("tnc.acceptOwn", true);
-
-        
         Config.rebootMode                   = request->hasParam("other.rebootMode", true);
         Config.rebootModeTime               = request->getParam("other.rebootModeTime", true)->value().toInt();
-        
 
         Config.ota.username                 = request->getParam("ota.username", true)->value();
         Config.ota.password                 = request->getParam("ota.password", true)->value();
 
+        Config.rememberStationTime          = request->getParam("other.rememberStationTime", true)->value().toInt();
 
-        Config.rememberStationTime              = request->getParam("other.rememberStationTime", true)->value().toInt();
-
-       
         Config.backupDigiMode               = request->hasParam("other.backupDigiMode", true);
-
-
         Config.lowPowerMode                 = request->hasParam("other.lowPowerMode", true);
         Config.lowVoltageCutOff             = request->getParam("other.lowVoltageCutOff", true)->value().toDouble();
 
+        Config.personalNote                 = request->getParam("personalNote", true)->value();
+
+        Config.webadmin.active              = request->hasParam("webadmin.active", true);
+        if (Config.webadmin.active) {
+            Config.webadmin.username        = request->getParam("webadmin.username", true)->value();
+            Config.webadmin.password        = request->getParam("webadmin.password", true)->value();
+        }
+
         Config.writeFile();
 
         AsyncWebServerResponse *response    = request->beginResponse(302, "text/html", "");
         response->addHeader("Location", "/");
         request->send(response);
-        display_toggle(false);
+        displayToggle(false);
         ESP.restart();
     }
 
@@ -205,7 +224,7 @@ namespace WEB_Utils {
 
             request->send(200, "text/plain", "Beacon will be sent in a while");
         } else if (type == "reboot") {
-            display_toggle(false);
+            displayToggle(false);
             ESP.restart();
         } else {
             request->send(404, "text/plain", "Not Found");
@@ -213,26 +232,26 @@ namespace WEB_Utils {
     }
 
     void handleStyle(AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/css", (const uint8_t*)web_style_css, web_style_css_len);
+        AsyncWebServerResponse *response = request->beginResponse(200, "text/css", (const uint8_t*)web_style_css, web_style_css_len);
         response->addHeader("Content-Encoding", "gzip");
         request->send(response);
     }
 
     void handleScript(AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/javascript", (const uint8_t*)web_script_js, web_script_js_len);
+        AsyncWebServerResponse *response = request->beginResponse(200, "text/javascript", (const uint8_t*)web_script_js, web_script_js_len);
         response->addHeader("Content-Encoding", "gzip");
         request->send(response);
     }
 
     void handleBootstrapStyle(AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/css", (const uint8_t*)web_bootstrap_css, web_bootstrap_css_len);
+        AsyncWebServerResponse *response = request->beginResponse(200, "text/css", (const uint8_t*)web_bootstrap_css, web_bootstrap_css_len);
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", "max-age=3600");
         request->send(response);
     }
 
     void handleBootstrapScript(AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse_P(200, "text/javascript", (const uint8_t*)web_bootstrap_js, web_bootstrap_js_len);
+        AsyncWebServerResponse *response = request->beginResponse(200, "text/javascript", (const uint8_t*)web_bootstrap_js, web_bootstrap_js_len);
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", "max-age=3600");
         request->send(response);
@@ -249,6 +268,7 @@ namespace WEB_Utils {
         server.on("/script.js", HTTP_GET, handleScript);
         server.on("/bootstrap.css", HTTP_GET, handleBootstrapStyle);
         server.on("/bootstrap.js", HTTP_GET, handleBootstrapScript);
+        server.on("/favicon.png", HTTP_GET, handleFavicon);
 
         OTA_Utils::setup(&server); // Include OTA Updater for WebServer
 

src/wifi_utils.cpp

@@ -40,7 +40,7 @@ namespace WIFI_Utils {
             Serial.print(millis());
             Serial.println("Reconnecting to WiFi...");
             WiFi.disconnect();
-            WiFi.reconnect();
+            WIFI_Utils::startWiFi();//WiFi.reconnect();
             previousWiFiMillis = millis();
 
             if (Config.backupDigiMode) {
@@ -70,11 +70,13 @@ namespace WIFI_Utils {
             startAP = true;
         } else {
             uint8_t wifiCounter = 0;
+            String hostName = "iGATE-" + Config.callsign;
+            WiFi.setHostname(hostName.c_str());
             WiFi.mode(WIFI_STA);
             WiFi.disconnect();
             delay(500);
             unsigned long start = millis();
-            show_display("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
+            displayShow("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
             Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
             WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
             while (WiFi.status() != WL_CONNECTED && wifiCounter<myWiFiAPSize) {
@@ -99,7 +101,7 @@ namespace WIFI_Utils {
                     currentWiFi = &Config.wifiAPs[myWiFiAPIndex];
                     start = millis();
                     Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
-                    show_display("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
+                    displayShow("", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
                     WiFi.disconnect();
                     WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
                 }
@@ -110,18 +112,20 @@ namespace WIFI_Utils {
         #endif
         if (WiFi.status() == WL_CONNECTED) {
             Serial.print("Connected as ");
-            Serial.println(WiFi.localIP());
-            show_display("", "     Connected!!", "" , "     loading ...", 1000);
+            Serial.print(WiFi.localIP());
+            Serial.print(" / MAC Address: ");
+            Serial.println(WiFi.macAddress());
+            displayShow("", "     Connected!!", "" , "     loading ...", 1000);
         } else if (WiFi.status() != WL_CONNECTED) {
             startAP = true;
 
             Serial.println("\nNot connected to WiFi! Starting Auto AP");
-            show_display("", " WiFi Not Connected!", "" , "     loading ...", 1000);
+            displayShow("", " WiFi Not Connected!", "" , "     loading ...", 1000);
         }
         WiFiConnected = !startAP;
         if (startAP) {
             Serial.println("\nNot connected to WiFi! Starting Auto AP");
-            show_display("", "   Starting Auto AP", " Please connect to it " , "     loading ...", 1000);
+            displayShow("", "   Starting Auto AP", " Please connect to it " , "     loading ...", 1000);
 
             startAutoAP();
         }

tools/compress.py

@@ -9,8 +9,21 @@ files = [
   'data_embed/style.css',
   'data_embed/bootstrap.js',
   'data_embed/bootstrap.css',
+  'data_embed/favicon.png',
 ]
 
+string_to_find_str = "String"
+string_to_find_ver = "versionDate"
+
+with open('src/LoRa_APRS_iGate.cpp', encoding='utf-8') as cpp_file:
+  for line in cpp_file:
+    if string_to_find_str in line and string_to_find_ver in line:
+      start = line.find('"') + 1
+      end = line.find('"', start)
+      if start > 0 and end > start:
+        versionDate = line[start:end]
+        break
+       
 for src in files:
   out = src + ".gz"
   
@@ -19,7 +32,7 @@ for src in files:
     content = f.read()
     
   if src == 'data_embed/index.html':
-    env_vars = env["BOARD"] + "<br>" + ','.join(env["BUILD_FLAGS"]).replace('-Werror -Wall,', '').replace(',-DELEGANTOTA_USE_ASYNC_WEBSERVER=1', '')
+    env_vars = env["BOARD"] + "<br>" + ','.join(env["BUILD_FLAGS"]).replace('-Werror -Wall,', '').replace(',-DELEGANTOTA_USE_ASYNC_WEBSERVER=1', '') + "<br>" + "Version date: " + versionDate
     current_date = datetime.datetime.utcnow().strftime('%Y-%m-%d %H:%M:%S') + " UTC"
     build_info = f'{env_vars}<br>Build date: {current_date}'.encode()