mirror of
https://github.com/rightup/pyMC_Repeater.git
synced 2026-03-28 17:43:06 +01:00
105 lines
2.4 KiB
Plaintext
105 lines
2.4 KiB
Plaintext
# Default Repeater Configuration
|
|
|
|
repeater:
|
|
# Node name for logging and identification
|
|
node_name: "mesh-repeater-01"
|
|
|
|
# Geographic location (optional)
|
|
# Latitude in decimal degrees (-90 to 90)
|
|
latitude: 0.0
|
|
# Longitude in decimal degrees (-180 to 180)
|
|
longitude: 0.0
|
|
|
|
# Path to identity file (public/private key)
|
|
# If not specified, a new identity will be generated
|
|
identity_file: null
|
|
|
|
# Duplicate packet cache TTL in seconds
|
|
cache_ttl: 60
|
|
|
|
# Score-based transmission filtering
|
|
# Enable quality-based packet filtering and adaptive delays
|
|
use_score_for_tx: false
|
|
|
|
# Score threshold for quality monitoring (future use)
|
|
# Currently reserved for potential future features like dashboard alerts,
|
|
# proactive statistics collection, or advanced filtering strategies.
|
|
# Changing this value has no effect on current packet processing.
|
|
score_threshold: 0.3
|
|
|
|
# Automatic advertisement interval in hours
|
|
# The repeater will send an advertisement packet at this interval
|
|
# Set to 0 to disable automatic adverts (manual only via web interface)
|
|
# Range: 0 (disabled) to 24+ hours
|
|
# Recommended: 10 hours for typical deployments
|
|
send_advert_interval_hours: 10
|
|
|
|
radio:
|
|
# Frequency in Hz (869.618 MHz for EU)
|
|
frequency: 869618000
|
|
|
|
# TX power in dBm
|
|
tx_power: 14
|
|
|
|
# Bandwidth in Hz (62500 = 62.5 kHz)
|
|
bandwidth: 62500
|
|
|
|
# LoRa spreading factor (7-12)
|
|
spreading_factor: 8
|
|
|
|
# Coding rate (5-8)
|
|
coding_rate: 8
|
|
|
|
# Preamble length in symbols
|
|
preamble_length: 17
|
|
|
|
# Sync word (LoRa network ID)
|
|
sync_word: 13380
|
|
|
|
# Enable CRC checking
|
|
crc_enabled: true
|
|
|
|
# Use implicit header mode
|
|
implicit_header: false
|
|
|
|
# SX1262 Hardware Configuration
|
|
sx1262:
|
|
# SPI bus and chip select
|
|
bus_id: 0
|
|
cs_id: 0
|
|
|
|
# GPIO pins (BCM numbering)
|
|
cs_pin: 21
|
|
reset_pin: 18
|
|
busy_pin: 20
|
|
irq_pin: 16
|
|
|
|
# TX/RX enable pins (-1 to disable)
|
|
txen_pin: -1
|
|
rxen_pin: -1
|
|
|
|
# Waveshare hardware flag
|
|
is_waveshare: false
|
|
|
|
delays:
|
|
# TX delay factor for flood mode (multiplier)
|
|
tx_delay_factor: 1.0
|
|
|
|
# TX delay factor for direct mode (faster)
|
|
direct_tx_delay_factor: 0.5
|
|
|
|
duty_cycle:
|
|
# Enable/disable duty cycle enforcement
|
|
# Set to false to disable airtime limits
|
|
enforcement_enabled: false
|
|
|
|
# Maximum airtime per minute in milliseconds
|
|
max_airtime_per_minute: 3600
|
|
|
|
logging:
|
|
# Log level: DEBUG, INFO, WARNING, ERROR
|
|
level: INFO
|
|
|
|
# Log format
|
|
format: "%(asctime)s - %(name)s - %(levelname)s - %(message)s"
|