#config.ini
# type can be serial, tcp, or ble
# port is the serial port to use, commented out will try to auto-detect
# hostname is the IP address of the device to connect to for tcp type
# mac is the MAC address of the device to connect to for ble type

[interface]
type = serial
port = /dev/ttyACM0
# port = /dev/ttyUSB0
# port = COM1
# hostname = 192.168.0.1
# mac = 00:11:22:33:44:55

# Additional interface for dual radio support
[interface2]
enabled = False
type = serial
port = /dev/ttyUSB0
#port = /dev/ttyACM1
# port = COM1
# hostname = meshtastic.local
# mac = 00:11:22:33:44:55

[general]
# if False will respond on all channels but the default channel
respond_by_dm_only = True
# defaultChannel is the meshtastic default public channel
defaultChannel = 0
# motd is reset to this value on boot
motd = Thanks for using MeshBOT! Have a good day!
welcome_message = MeshBot, here for you like a friend who is not. Try sending: ping @foo or, cmd
# enable or disable the Joke module
DadJokes = True
# StoreForward Enabled and Limits
StoreForward = True
StoreLimit = 3
# 24 hour clock
zuluTime = True
# wait time for URL requests
URL_TIMEOUT = 10

[bbs]
enabled = True
# list of banned nodes numbers ex: 2813308004,4258675309
bbs_ban_list = 
# list of admin nodes numbers ex: 2813308004,4258675309
bbs_admin_list = 

# location module
[location]
enabled = True
lat = 48.50
lon = -123.0
# weather forecast days, the first two rows are today and tonight
DAYS_OF_WEATHER = 4
# number of weather alerts to display
ALERT_COUNT = 2

# solar module
[solar]
enabled = True

# repeater module
[repeater]
enabled = False
# list of repeater channels ex: 2,3 which will be consumed 
# and rebroadcasted on the same channel on the other device/node/interface
# with great power comes great responsibility, danger could be lurking in use of this feature
# if you have the two nodes on the same radio configurations, you could create a feedback loop
repeater_channels = 

[radioMon]
# using Hamlib rig control will monitor and alert on channel use
enabled = False
rigControlServerAddress = localhost:4532
# brodcast to all nodes on the channel can alsp be  = 2,3
sigWatchBrodcastCh = 2
# minimum SNR as reported by radio via hamlib
signalDetectionThreshold = -10
# hold time for high SNR
signalHoldTime = 10
# the following are combined to reset the monitor
signalCooldown = 5
signalCycleLimit = 5