diff --git a/Version 3 (Kerlink Wirnet Station)/README.md b/Version 3 (Kerlink Wirnet Station)/README.md
index a18de12..b196016 100644
--- a/Version 3 (Kerlink Wirnet Station)/README.md	
+++ b/Version 3 (Kerlink Wirnet Station)/README.md	
@@ -25,15 +25,15 @@ This version setup uses the following hardware:
 1) Please make sure that the wiring of the  Kerlink Wirnet Station is okay  
 ![Correct wiring](https://drive.google.com/uc?export=view&id=1N7IykG61Pg5LXPOWJy6CH8Crh6R4sSuM)
 2) For the Power over Ethernet injector  
-- Connect “Data & Power out”   to the cable connected to the gateway  
-- Data In : Cable connected to the network (router)
+	• Connect “Data & Power out”   to the cable connected to the gateway  
+	• Data In : Cable connected to the network (router)
 3) Gain access to the router and see whether that the gateway has obtained an IP-address from it. (It should and that is used to connect to the gate-way)
 4) From a browser try to connect to that IP-Address
 5) Enter your login details, these are the default username and password:   
-- Login : admin  
-- Password: spnpwd
+	• Login : admin  
+	• Password: spnpwd
 6) If it does not obtain an IP from the router, connect the cable that connected to the router to the computer and try following:    
-- Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150)
+	• Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150)
 
 ## Information extraction (Requires Internet Connection)
 To extract the information, follow the steps below: