From b949bef0d2e86e37a4a1cda93a5d4b5945dd4d40 Mon Sep 17 00:00:00 2001
From: loradar <56890699+loradar@users.noreply.github.com>
Date: Mon, 28 Oct 2019 19:21:16 +1100
Subject: [PATCH] Update README.md

---
 Version 1 (mTAC-LoRa)/README.md | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Version 1 (mTAC-LoRa)/README.md b/Version 1 (mTAC-LoRa)/README.md
index 8e75d44..718ff45 100644
--- a/Version 1 (mTAC-LoRa)/README.md	
+++ b/Version 1 (mTAC-LoRa)/README.md	
@@ -15,7 +15,9 @@ This version setup uses the following hardware:
 *The Raspberry Pi has been configured to initiate the 'Packet logger software' upon powering on and obtaining the correct time via the Internet (A delay of 5 minutes has been placed).*
 
 ## Instructions
-1) Download the Raspberry Pi (RPi) image according to the frequency bandplan of interest, from https://drive.google.com/file/d/1OAoVtyabDzkLRxGgQARBqh3THc2MbKr8/view?usp=sharing
+1) Download the Raspberry Pi (RPi) image according to the frequency bandplan of interest:  
+- 915 frequency: https://drive.google.com/file/d/144UO2tI30Df7-DTuJlAsTuzdEE44IgZ3/view?usp=sharing
+- 923 frequency: https://drive.google.com/file/d/1Wxu4gwcrQ9sh8w0kbiSxsRnPNqzYcCHC/view?usp=sharing
 2) Flash the image onto an SD card, using _balenaEtcher_ (https://www.balena.io/etcher/)
 3) Insert the SD card into the RPi and power it on, and the data collection should commence in 5 minutes (It is recommended that you connect the RPi to a wired or wireless network so that the correct time can be obtained)