diff --git a/Version 3 (Kerlink Wirnet Station)/README.md b/Version 3 (Kerlink Wirnet Station)/README.md
index bf29f94..faa3ee8 100644
--- a/Version 3 (Kerlink Wirnet Station)/README.md	
+++ b/Version 3 (Kerlink Wirnet Station)/README.md	
@@ -3,26 +3,26 @@
 ## Instructions
 **Follow these steps to perform passive packet sniffing using Kerlink Wirnet Station**
 
-1) Connect Kerlink Wirnet Station to ethernet interface of Raspberry Pi.
-2) Open chromium browser from Raspberry Pi.
-3) Go to the IP address of Kerlink gateway.  
+1) Connect Kerlink Wirnet Station to ethernet interface of Raspberry Pi
+2) Open chromium browser from Raspberry Pi
+3) Go to the IP address of Kerlink gateway  
 	• If you are using a static IP address, it should be 192.168.13.151
-4) Login to the gateway using your username and password.
-5) Run “Downloader.py” to collect log data from Kerlink gateway without closing the chromium browser.
-6) Copy “LogReader.py” to downloads folder and run.
-7) A new file called “Packets.cvs” will be created with sniffed packets.
+4) Login to the gateway using your username and password
+5) Run “Downloader.py” to collect log data from Kerlink gateway without closing the chromium browser
+6) Copy “LogReader.py” to downloads folder and run
+7) A new file called “Packets.cvs” will be created with sniffed packets
 
 **If you are having difficulties in step 3, please follow these steps to connect to Kerlink Wirnet Station**
 
-1) Please make sure that the wiring of the  Kerlink Wirnet Station is okay.  
+1) Please make sure that the wiring of the  Kerlink Wirnet Station is okay  
 ![Correct wiring](https://drive.google.com/uc?export=view&id=1N7IykG61Pg5LXPOWJy6CH8Crh6R4sSuM)
 2) For the Power over Ethernet injector  
-	• Connect “Data & Power out”   to the cable connected to the gateway.  
-	• Data In : Cable connected to the network (router).
+	• Connect “Data & Power out”   to the cable connected to the gateway  
+	• Data In : Cable connected to the network (router)
 3) Gain access to the router and see whether that the gateway has obtained an IP-address from it. (It should and that is used to connect to the gate-way)
-4) From a browser try to connect to that IP-Address.
+4) From a browser try to connect to that IP-Address
 5) Enter your login details, these are the default username and password:   
 	• Login : admin  
 	• Password: spnpwd
 6) If it does not obtain an IP from the router, connect the cable that connected to the router to the computer and try following,  
-	• Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150).
+	• Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150)