From 1b1633f422a1ece1966c4546469eda0271b6fa4b Mon Sep 17 00:00:00 2001 From: loradar <56890699+loradar@users.noreply.github.com> Date: Mon, 28 Oct 2019 19:35:08 +1100 Subject: [PATCH] Update README.md --- Version 3 (Kerlink Wirnet Station)/README.md | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Version 3 (Kerlink Wirnet Station)/README.md b/Version 3 (Kerlink Wirnet Station)/README.md index 4dd57fd..a18de12 100644 --- a/Version 3 (Kerlink Wirnet Station)/README.md +++ b/Version 3 (Kerlink Wirnet Station)/README.md @@ -25,15 +25,15 @@ This version setup uses the following hardware: 1) Please make sure that the wiring of the Kerlink Wirnet Station is okay ![Correct wiring](https://drive.google.com/uc?export=view&id=1N7IykG61Pg5LXPOWJy6CH8Crh6R4sSuM) 2) For the Power over Ethernet injector - • Connect “Data & Power out” to the cable connected to the gateway - • Data In : Cable connected to the network (router) +- Connect “Data & Power out” to the cable connected to the gateway +- Data In : Cable connected to the network (router) 3) Gain access to the router and see whether that the gateway has obtained an IP-address from it. (It should and that is used to connect to the gate-way) 4) From a browser try to connect to that IP-Address 5) Enter your login details, these are the default username and password: - • Login : admin - • Password: spnpwd -6) If it does not obtain an IP from the router, connect the cable that connected to the router to the computer and try following, - • Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150) +- Login : admin +- Password: spnpwd +6) If it does not obtain an IP from the router, connect the cable that connected to the router to the computer and try following: +- Try to connect to the IP 192.168.13.151. Please set the computers LAN to the same (something like 192.168.13.150) ## Information extraction (Requires Internet Connection) To extract the information, follow the steps below: