codebase into one branch consolidation

- Bond clearing on firmware version change (lines 38-67) — stores the firmware version string in SPIFFS at /ble_ver. On boot, if it doesn't match, all stored bonds are wiped. This fixes the forget/re-pair issue after flashing. Normal reboots keep pairing intact.
- TX power -3 dBm (line 73).
Connection parameter negotiation (lines 137-147) — latency=4 for power saving when connected.
- Advertising intervals 300ms/600ms (three places) — compromise between discovery speed and power.
- No controller power-down — the header file is unchanged from stock.

Audiobook Player Guide.md

@@ -0,0 +1,78 @@
+## Audiobook Player (Audio variant only)
+
+Press **P** from the home screen to open the audiobook player.
+Place `.mp3`, `.m4b`, `.m4a`, or `.wav` files in `/audiobooks/` on the SD card.
+Files can be organised into subfolders (e.g. by author) — use **Enter** to
+browse into folders and **.. (up)** to go back.
+
+| Key | Action |
+|-----|--------|
+| W / S | Scroll file list / Volume up-down |
+| Enter | Select book or folder / Play-Pause |
+| A | Seek back 30 seconds |
+| D | Seek forward 30 seconds |
+| [ | Previous chapter (M4B only) |
+| ] | Next chapter (M4B only) |
+| Q | Leave player (audio continues) / Close book (when paused) / Exit (from file list) |
+
+### Recommended Format
+
+**MP3 is the recommended format.** M4B/M4A files are supported but currently
+have playback issues with the ESP32-audioI2S library — some files may fail to
+decode or produce silence. MP3 files play reliably and are the safest choice.
+
+MP3 files should be encoded at a **44100 Hz sample rate**. Lower sample rates
+(e.g. 22050 Hz) can cause distortion or playback failure due to ESP32-S3 I2S
+hardware limitations.
+
+**Bookmarks** are saved automatically every 30 seconds during playback and when
+you stop or exit. Reopening a book resumes from your last position.
+
+**Cover art** from M4B files is displayed as dithered monochrome on the e-ink
+screen, along with title, author, and chapter information.
+
+**Metadata caching** — the first time you open the audiobook player, it reads
+title and author tags from each file (which can take a few seconds with many
+files). This metadata is cached to the SD card so subsequent visits load
+near-instantly. If you add or remove files the cache updates automatically.
+
+### Background Playback
+
+Audio continues playing when you leave the audiobook player screen. Press **Q**
+while audio is playing to return to the home screen — a **>>** indicator will
+appear in the status bar next to the battery icon to show that audio is active
+in the background. Press **P** at any time to return to the player screen and
+resume control.
+
+If you pause or stop playback first and then press **Q**, the book is closed
+and you're returned to the file list instead.
+
+### Audio Hardware
+
+The audiobook player uses the PCM5102A I2S DAC on the audio variant of the
+T-Deck Pro (I2S pins: BCLK=7, DOUT=8, LRC=9). Audio is output via the 3.5mm
+headphone jack.
+
+> **Note:** The audiobook player is not available on the 4G modem variant
+> due to I2S pin conflicts.
+
+### SD Card Folder Structure
+
+```
+SD Card
+├── audiobooks/
+│   ├── .bookmarks/          (auto-created, stores resume positions)
+│   │   ├── mybook.bmk
+│   │   └── another.bmk
+│   ├── .metacache            (auto-created, speeds up file list loading)
+│   ├── Ann Leckie/
+│   │   ├── Ancillary Justice.mp3
+│   │   └── Ancillary Sword.mp3
+│   ├── Iain M. Banks/
+│   │   └── The Algebraist.mp3
+│   ├── mybook.mp3
+│   └── podcast.mp3
+├── books/                   (existing — text reader)
+│   └── ...
+└── ...
+```

examples/companion_radio/AbstractUITask.h

@@ -40,7 +40,8 @@ public:
   void enableSerial() { _serial->enable(); }
   void disableSerial() { _serial->disable(); }
   virtual void msgRead(int msgcount) = 0;
-  virtual void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) = 0;
+  virtual void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount,
+                      const uint8_t* path = nullptr) = 0;
   virtual void notify(UIEventType t = UIEventType::none) = 0;
   virtual void loop() = 0;
   virtual void showAlert(const char* text, int duration_millis) {}

examples/companion_radio/MyMesh.cpp

@@ -439,7 +439,8 @@ void MyMesh::queueMessage(const ContactInfo &from, uint8_t txt_type, mesh::Packe
   // we only want to show text messages on display, not cli data
   bool should_display = txt_type == TXT_TYPE_PLAIN || txt_type == TXT_TYPE_SIGNED_PLAIN;
   if (should_display && _ui) {
-    _ui->newMsg(path_len, from.name, text, offline_queue_len);
+    const uint8_t* msg_path = (pkt->isRouteFlood() && pkt->path_len > 0) ? pkt->path : nullptr;
+    _ui->newMsg(path_len, from.name, text, offline_queue_len, msg_path);
     if (!_prefs.buzzer_quiet) _ui->notify(UIEventType::contactMessage); //buzz if enabled
   }
 #endif
@@ -523,6 +524,13 @@ void MyMesh::onCommandDataRecv(const ContactInfo &from, mesh::Packet *pkt, uint3
                                const char *text) {
   markConnectionActive(from); // in case this is from a server, and we have a connection
   queueMessage(from, TXT_TYPE_CLI_DATA, pkt, sender_timestamp, NULL, 0, text);
+
+  // Forward CLI response to UI admin screen if admin session is active
+#ifdef DISPLAY_CLASS
+  if (_admin_contact_idx >= 0 && _ui) {
+    _ui->onAdminCliResponse(from.name, text);
+  }
+#endif
 }
 
 void MyMesh::onSignedMessageRecv(const ContactInfo &from, mesh::Packet *pkt, uint32_t sender_timestamp,
@@ -574,7 +582,8 @@ void MyMesh::onChannelMessageRecv(const mesh::GroupChannel &channel, mesh::Packe
     channel_name = channel_details.name;
   }
   if (_ui) {
-    _ui->newMsg(path_len, channel_name, text, offline_queue_len);
+    const uint8_t* msg_path = (pkt->isRouteFlood() && pkt->path_len > 0) ? pkt->path : nullptr;
+    _ui->newMsg(path_len, channel_name, text, offline_queue_len, msg_path);
     if (!_prefs.buzzer_quiet) _ui->notify(UIEventType::channelMessage); //buzz if enabled
   }
 #endif
@@ -650,6 +659,53 @@ bool MyMesh::uiSendDirectMessage(uint32_t contact_idx, const char* text) {
   return true;
 }
 
+bool MyMesh::uiLoginToRepeater(uint32_t contact_idx, const char* password) {
+  ContactInfo contact;
+  if (!getContactByIdx(contact_idx, contact)) return false;
+
+  ContactInfo* recipient = lookupContactByPubKey(contact.id.pub_key, PUB_KEY_SIZE);
+  if (!recipient) return false;
+
+  uint32_t est_timeout;
+  int result = sendLogin(*recipient, password, est_timeout);
+  if (result == MSG_SEND_FAILED) {
+    MESH_DEBUG_PRINTLN("UI: Admin login send failed to %s", recipient->name);
+    return false;
+  }
+
+  clearPendingReqs();
+  memcpy(&pending_login, recipient->id.pub_key, 4);
+  _admin_contact_idx = contact_idx;
+
+  MESH_DEBUG_PRINTLN("UI: Admin login sent to %s (%s), timeout=%dms",
+                     recipient->name, result == MSG_SEND_SENT_FLOOD ? "flood" : "direct",
+                     est_timeout);
+  return true;
+}
+
+bool MyMesh::uiSendCliCommand(uint32_t contact_idx, const char* command) {
+  ContactInfo contact;
+  if (!getContactByIdx(contact_idx, contact)) return false;
+
+  ContactInfo* recipient = lookupContactByPubKey(contact.id.pub_key, PUB_KEY_SIZE);
+  if (!recipient) return false;
+
+  uint32_t timestamp = getRTCClock()->getCurrentTimeUnique();
+  uint32_t est_timeout;
+  int result = sendCommandData(*recipient, timestamp, 0, command, est_timeout);
+  if (result == MSG_SEND_FAILED) {
+    MESH_DEBUG_PRINTLN("UI: CLI command send failed to %s: %s", recipient->name, command);
+    return false;
+  }
+
+  _admin_contact_idx = contact_idx;
+
+  MESH_DEBUG_PRINTLN("UI: CLI command sent to %s (%s): %s, timeout=%dms",
+                     recipient->name, result == MSG_SEND_SENT_FLOOD ? "flood" : "direct",
+                     command, est_timeout);
+  return true;
+}
+
 uint8_t MyMesh::onContactRequest(const ContactInfo &contact, uint32_t sender_timestamp, const uint8_t *data,
                                  uint8_t len, uint8_t *reply) {
   if (data[0] == REQ_TYPE_GET_TELEMETRY_DATA) {
@@ -708,6 +764,11 @@ void MyMesh::onContactResponse(const ContactInfo &contact, const uint8_t *data,
       out_frame[i++] = 0; // legacy: is_admin = false
       memcpy(&out_frame[i], contact.id.pub_key, 6);
       i += 6;                                     // pub_key_prefix
+
+      #ifdef DISPLAY_CLASS
+      // Notify UI of successful legacy login
+      if (_ui) _ui->onAdminLoginResult(true, 0, tag);
+      #endif
     } else if (data[4] == RESP_SERVER_LOGIN_OK) { // new login response
       uint16_t keep_alive_secs = ((uint16_t)data[5]) * 16;
       if (keep_alive_secs > 0) {
@@ -721,11 +782,21 @@ void MyMesh::onContactResponse(const ContactInfo &contact, const uint8_t *data,
       i += 4; // NEW: include server timestamp
       out_frame[i++] = data[7]; // NEW (v7): ACL permissions
       out_frame[i++] = data[12]; // FIRMWARE_VER_LEVEL
+
+      #ifdef DISPLAY_CLASS
+      // Notify UI of successful login
+      if (_ui) _ui->onAdminLoginResult(true, data[6], tag);
+      #endif
     } else {
       out_frame[i++] = PUSH_CODE_LOGIN_FAIL;
       out_frame[i++] = 0; // reserved
       memcpy(&out_frame[i], contact.id.pub_key, 6);
       i += 6; // pub_key_prefix
+
+      #ifdef DISPLAY_CLASS
+      // Notify UI of login failure
+      if (_ui) _ui->onAdminLoginResult(false, 0, 0);
+      #endif
     }
     _serial->writeFrame(out_frame, i);
   } else if (len > 4 && // check for status response
@@ -897,6 +968,7 @@ MyMesh::MyMesh(mesh::Radio &radio, mesh::RNG &rng, mesh::RTCClock &rtc, SimpleMe
   memset(send_scope.key, 0, sizeof(send_scope.key));
   memset(_sent_track, 0, sizeof(_sent_track));
   _sent_track_idx = 0;
+  _admin_contact_idx = -1;
 
   // defaults
   memset(&_prefs, 0, sizeof(_prefs));
@@ -1111,6 +1183,8 @@ void MyMesh::handleCmdFrame(size_t len) {
     memcpy(&msg_timestamp, &cmd_frame[i], 4);
     i += 4;
     const char *text = (char *)&cmd_frame[i];
+    int text_len = len - i;
+    cmd_frame[len] = '\0';  // Null-terminate for C string use
 
     if (txt_type != TXT_TYPE_PLAIN) {
       writeErrFrame(ERR_CODE_UNSUPPORTED_CMD);
@@ -1119,6 +1193,11 @@ void MyMesh::handleCmdFrame(size_t len) {
       bool success = getChannel(channel_idx, channel);
       if (success && sendGroupMessage(msg_timestamp, channel.channel, _prefs.node_name, text, len - i)) {
         writeOKFrame();
+        #ifdef DISPLAY_CLASS
+        if (_ui) {
+          _ui->addSentChannelMessage(channel_idx, _prefs.node_name, text);
+        }
+#endif
       } else {
         writeErrFrame(ERR_CODE_NOT_FOUND); // bad channel_idx
       }

examples/companion_radio/MyMesh.h

@@ -8,11 +8,11 @@
 #define FIRMWARE_VER_CODE 8
 
 #ifndef FIRMWARE_BUILD_DATE
-#define FIRMWARE_BUILD_DATE "10 Feb 2026"
+#define FIRMWARE_BUILD_DATE "20 Feb 2026"
 #endif
 
 #ifndef FIRMWARE_VERSION
-#define FIRMWARE_VERSION "Meck v0.8.3"
+#define FIRMWARE_VERSION "Meck v0.9.1A"
 #endif
 
 #if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
@@ -72,11 +72,6 @@
 
 /* -------------------------------------------------------------------------------------- */
 
-// SD-backed settings persistence (defined in main.cpp for T-Deck Pro)
-#if defined(LilyGo_TDeck_Pro) && defined(HAS_SDCARD)
-  extern void backupSettingsToSD();
-#endif
-
 #define REQ_TYPE_GET_STATUS             0x01 // same as _GET_STATS
 #define REQ_TYPE_KEEP_ALIVE             0x02
 #define REQ_TYPE_GET_TELEMETRY_DATA     0x03
@@ -174,23 +169,12 @@ protected:
   }
 
 public:
-  void savePrefs() {
-    _store->savePrefs(_prefs, sensors.node_lat, sensors.node_lon);
-    #if defined(LilyGo_TDeck_Pro) && defined(HAS_SDCARD)
-      backupSettingsToSD();
-    #endif
-  }
+  void savePrefs() { _store->savePrefs(_prefs, sensors.node_lat, sensors.node_lon); }
   void saveChannels() {
     _store->saveChannels(this);
-    #if defined(LilyGo_TDeck_Pro) && defined(HAS_SDCARD)
-      backupSettingsToSD();
-    #endif
   }
   void saveContacts() {
     _store->saveContacts(this);
-    #if defined(LilyGo_TDeck_Pro) && defined(HAS_SDCARD)
-      backupSettingsToSD();
-    #endif
   }
 
 private:

examples/companion_radio/NodePrefs.h

@@ -29,4 +29,5 @@ struct NodePrefs {  // persisted to file
   uint32_t gps_interval;     // GPS read interval in seconds
   uint8_t autoadd_config;    // bitmask for auto-add contacts config
   int8_t  utc_offset_hours;  // UTC offset in hours (-12 to +14), default 0
+  uint8_t kb_flash_notify;   // Keyboard backlight flash on new message (0=off, 1=on)
 };

examples/companion_radio/main.cpp

@@ -3,15 +3,19 @@
 #include "MyMesh.h"
 #include "variant.h"   // Board-specific defines (HAS_GPS, etc.)
 #include "target.h"    // For sensors, board, etc.
+#include "GPSDutyCycle.h"
+#include "CPUPowerManager.h"
 
 // T-Deck Pro Keyboard support
 #if defined(LilyGo_TDeck_Pro)
   #include "TCA8418Keyboard.h"
   #include <SD.h>
   #include "TextReaderScreen.h"
+  #include "NotesScreen.h"
   #include "ContactsScreen.h"
   #include "ChannelScreen.h"
   #include "SettingsScreen.h"
+  #include "RepeaterAdminScreen.h"
   extern SPIClass displaySpi;  // From GxEPDDisplay.cpp, shared SPI bus
 
   TCA8418Keyboard keyboard(I2C_ADDR_KEYBOARD, &Wire);
@@ -23,7 +27,7 @@
   static uint8_t composeChannelIdx = 0;
   static unsigned long lastComposeRefresh = 0;
   static bool composeNeedsRefresh = false;
-  #define COMPOSE_REFRESH_INTERVAL 600  // ms between e-ink refreshes while typing (refresh takes ~650ms)
+  #define COMPOSE_REFRESH_INTERVAL 100  // ms before starting e-ink refresh after keypress (refresh itself takes ~644ms)
 
   // DM compose mode (direct message to a specific contact)
   static bool composeDM = false;
@@ -40,6 +44,24 @@
   
   // Text reader mode state
   static bool readerMode = false;
+
+  // Notes mode state
+  static bool notesMode = false;
+
+  // Audiobook player — Audio object is heap-allocated on first use to avoid
+  // consuming ~40KB of DMA/decode buffers at boot (starves BLE stack).
+  #ifdef MECK_AUDIO_VARIANT
+  #include "AudiobookPlayerScreen.h"
+  #include "Audio.h"
+  Audio* audio = nullptr;
+  static bool audiobookMode = false;
+  #endif
+
+  // Power management
+  #if HAS_GPS
+    GPSDutyCycle gpsDuty;
+  #endif
+  CPUPowerManager cpuPower;
   
   void initKeyboard();
   void handleKeyboardInput();
@@ -308,6 +330,9 @@ void setup() {
   }
   MESH_DEBUG_PRINTLN("setup() - radio_init() done");
 
+  // CPU frequency scaling — drop to 80 MHz for idle mesh listening
+  cpuPower.begin();
+
   MESH_DEBUG_PRINTLN("setup() - about to call fast_rng.begin()");
   fast_rng.begin(radio_get_rng_seed());
   MESH_DEBUG_PRINTLN("setup() - fast_rng.begin() done");
@@ -392,7 +417,7 @@ void setup() {
   MESH_DEBUG_PRINTLN("setup() - SPIFFS.begin() done");
 
   // ---------------------------------------------------------------------------
-  // Early SD card init — needed BEFORE the_mesh.begin() so we can restore
+  // Early SD card init — needed BEFORE the_mesh.begin() so we can restore
   // settings from a previous firmware flash.  The display SPI bus is already
   // up (display.begin() ran earlier), so SD can share it now.
   // ---------------------------------------------------------------------------
@@ -448,12 +473,6 @@ void setup() {
   the_mesh.startInterface(serial_interface);
   MESH_DEBUG_PRINTLN("setup() - the_mesh.startInterface() done");
 
-  // T-Deck Pro: default BLE to OFF on boot (user can toggle with Bluetooth page)
-  #if defined(LilyGo_TDeck_Pro)
-    serial_interface.disable();
-    MESH_DEBUG_PRINTLN("setup() - BLE disabled by default (toggle via home screen)");
-  #endif
-
 #else
   #error "need to define filesystem"
 #endif
@@ -501,10 +520,22 @@ void setup() {
     if (reader) {
       reader->setSDReady(true);
       if (disp) {
+        cpuPower.setBoost();  // Boost CPU for EPUB processing
         reader->bootIndex(*disp);
       }
     }
 
+    // Tell notes screen that SD is ready
+    NotesScreen* notesScr = (NotesScreen*)ui_task.getNotesScreen();
+    if (notesScr) {
+      notesScr->setSDReady(true);
+    }
+
+    // Audiobook player screen creation is deferred to first use (case 'p' in
+    // handleKeyboardInput) to avoid allocating Audio I2S/DMA buffers at boot,
+    // which would starve BLE of heap memory.
+    MESH_DEBUG_PRINTLN("setup() - Audiobook player deferred (lazy init on first use)");
+
     // Do an initial settings backup to SD (captures any first-boot defaults)
     backupSettingsToSD();
   }
@@ -527,40 +558,101 @@ void setup() {
   }
   #endif
 
-  // Enable GPS by default on T-Deck Pro
+  // GPS duty cycle — honour saved pref, default to enabled on first boot
   #if HAS_GPS
-    // Set GPS enabled in both sensor manager and node prefs
-    sensors.setSettingValue("gps", "1");
-    the_mesh.getNodePrefs()->gps_enabled = 1;
-    the_mesh.savePrefs();  // SD backup triggered automatically
-    MESH_DEBUG_PRINTLN("setup() - GPS enabled by default");
+  {
+    bool gps_wanted = the_mesh.getNodePrefs()->gps_enabled;
+    gpsDuty.setStreamCounter(&gpsStream);
+    gpsDuty.begin(gps_wanted);
+    if (gps_wanted) {
+      sensors.setSettingValue("gps", "1");
+    } else {
+      sensors.setSettingValue("gps", "0");
+    }
+    MESH_DEBUG_PRINTLN("setup() - GPS duty cycle started (enabled=%d)", gps_wanted);
+  }
   #endif
 
+  // T-Deck Pro: BLE starts disabled for standalone-first operation
+  // User can toggle it on from the Bluetooth home page (Enter or long-press)
+  #if defined(LilyGo_TDeck_Pro) && defined(BLE_PIN_CODE)
+    serial_interface.disable();
+    MESH_DEBUG_PRINTLN("setup() - BLE disabled at boot (standalone mode)");
+  #endif
+
+  Serial.printf("setup() complete — free heap: %d, largest block: %d\n",
+                 ESP.getFreeHeap(), ESP.getMaxAllocHeap());
   MESH_DEBUG_PRINTLN("=== setup() - COMPLETE ===");
 }
 
 void loop() {
   the_mesh.loop();
+
+  // GPS duty cycle — check for fix and manage power state
+  #if HAS_GPS
+  {
+    bool gps_hw_on = gpsDuty.loop();
+    if (gps_hw_on) {
+      LocationProvider* lp = sensors.getLocationProvider();
+      if (lp != NULL && lp->isValid()) {
+        gpsDuty.notifyFix();
+      }
+    }
+  }
+  #endif
+
   sensors.loop();
+
+  // CPU frequency auto-timeout back to idle
+  cpuPower.loop();
+
+  // Audiobook: service audio decode regardless of which screen is active
+#ifdef MECK_AUDIO_VARIANT
+  {
+    AudiobookPlayerScreen* abPlayer =
+      (AudiobookPlayerScreen*)ui_task.getAudiobookScreen();
+    if (abPlayer) {
+      abPlayer->audioTick();
+      // Keep CPU at high freq during active audio decode
+      if (abPlayer->isAudioActive()) {
+        cpuPower.setBoost();
+      }
+    }
+  }
+#endif
 #ifdef DISPLAY_CLASS
   // Skip UITask rendering when in compose mode to prevent flickering
   #if defined(LilyGo_TDeck_Pro)
-  if (!composeMode) {
+  // Also suppress during notes editing (same debounce pattern as compose)
+  bool notesEditing = notesMode && ((NotesScreen*)ui_task.getNotesScreen())->isEditing();
+  bool notesRenaming = notesMode && ((NotesScreen*)ui_task.getNotesScreen())->isRenaming();
+  bool notesSuppressLoop = notesEditing || notesRenaming;
+  if (!composeMode && !notesSuppressLoop) {
     ui_task.loop();
   } else {
-    // Handle debounced compose/emoji picker screen refresh
+    // Handle debounced screen refresh (compose, emoji picker, or notes editor)
     if (composeNeedsRefresh && (millis() - lastComposeRefresh) >= COMPOSE_REFRESH_INTERVAL) {
-      if (emojiPickerMode) {
-        drawEmojiPicker();
-      } else {
-        drawComposeScreen();
+      if (composeMode) {
+        if (emojiPickerMode) {
+          drawEmojiPicker();
+        } else {
+          drawComposeScreen();
+        }
+      } else if (notesSuppressLoop) {
+        // Notes editor/rename renders through UITask - force a refresh cycle
+        ui_task.forceRefresh();
+        ui_task.loop();
       }
       lastComposeRefresh = millis();
       composeNeedsRefresh = false;
     }
   }
-  // Track reader mode state for key routing
+  // Track reader/notes/audiobook mode state for key routing
   readerMode = ui_task.isOnTextReader();
+  notesMode = ui_task.isOnNotesScreen();
+  #ifdef MECK_AUDIO_VARIANT
+  audiobookMode = ui_task.isOnAudiobookPlayer();
+  #endif
   #else
   ui_task.loop();
   #endif
@@ -697,7 +789,7 @@ void handleKeyboardInput() {
     }
     
     // A/D keys switch channels (only when buffer is empty, not in DM mode)
-    if ((key == 'a' || key == 'A') && composePos == 0 && !composeDM) {
+    if ((key == 'a') && composePos == 0 && !composeDM) {
       // Previous channel
       if (composeChannelIdx > 0) {
         composeChannelIdx--;
@@ -716,7 +808,7 @@ void handleKeyboardInput() {
       return;
     }
     
-    if ((key == 'd' || key == 'D') && composePos == 0 && !composeDM) {
+    if ((key == 'd') && composePos == 0 && !composeDM) {
       // Next channel
       ChannelDetails ch;
       uint8_t nextIdx = composeChannelIdx + 1;
@@ -750,13 +842,49 @@ void handleKeyboardInput() {
     return;
   }
   
+  // *** AUDIOBOOK MODE ***
+#ifdef MECK_AUDIO_VARIANT
+  if (audiobookMode) {
+    AudiobookPlayerScreen* abPlayer =
+      (AudiobookPlayerScreen*)ui_task.getAudiobookScreen();
+
+    // Q key: behavior depends on playback state
+    //   - Playing: navigate home, audio continues in background
+    //   - Paused/stopped: close book, return to file list
+    //   - File list: exit player entirely
+    if (key == 'q') {
+      if (abPlayer->isBookOpen()) {
+        if (abPlayer->isAudioActive()) {
+          // Audio is playing — leave screen, audio continues via audioTick()
+          Serial.println("Leaving audiobook player (audio continues in background)");
+          ui_task.gotoHomeScreen();
+        } else {
+          // Paused or stopped — close book, show file list
+          abPlayer->closeCurrentBook();
+          Serial.println("Closed audiobook (was paused/stopped)");
+          // Stay on audiobook screen showing file list
+        }
+      } else {
+        abPlayer->exitPlayer();
+        Serial.println("Exiting audiobook player");
+        ui_task.gotoHomeScreen();
+      }
+      return;
+    }
+
+    // All other keys pass through to the player screen
+    ui_task.injectKey(key);
+    return;
+  }
+#endif  // MECK_AUDIO_VARIANT
+
   // *** TEXT READER MODE ***
   if (readerMode) {
     TextReaderScreen* reader = (TextReaderScreen*)ui_task.getTextReaderScreen();
     
     // Q key: if reading, reader handles it (close book -> file list)
     //         if on file list, exit reader entirely
-    if (key == 'q' || key == 'Q') {
+    if (key == 'q') {
       if (reader->isReading()) {
         // Let the reader handle Q (close book, go to file list)
         ui_task.injectKey('q');
@@ -774,12 +902,147 @@ void handleKeyboardInput() {
     return;
   }
 
+  // *** NOTES MODE ***
+  if (notesMode) {
+    NotesScreen* notes = (NotesScreen*)ui_task.getNotesScreen();
+
+    // ---- EDITING MODE ----
+    if (notes->isEditing()) {
+      // Shift+Backspace = save and exit
+      if (key == '\b') {
+        if (keyboard.wasShiftConsumed()) {
+          Serial.println("Notes: Shift+Backspace, saving...");
+          notes->saveAndExit();
+          ui_task.forceRefresh();
+          return;
+        }
+        // Regular backspace - delete before cursor
+        ui_task.injectKey(key);
+        composeNeedsRefresh = true;
+        return;
+      }
+
+      // Cursor navigation via Shift+WASD (produces uppercase)
+      if (key == 'W') { notes->moveCursorUp();    composeNeedsRefresh = true; return; }
+      if (key == 'A') { notes->moveCursorLeft();   composeNeedsRefresh = true; return; }
+      if (key == 'S') { notes->moveCursorDown();   composeNeedsRefresh = true; return; }
+      if (key == 'D') { notes->moveCursorRight();  composeNeedsRefresh = true; return; }
+
+      // Q when buffer is empty or unchanged = exit (nothing to lose)
+      if (key == 'q' && (notes->isEmpty() || !notes->isDirty())) {
+        Serial.println("Notes: Q exit (nothing to save)");
+        notes->discardAndExit();
+        ui_task.forceRefresh();
+        return;
+      }
+
+      // Enter = newline (pass through with debounce)
+      if (key == '\r') {
+        ui_task.injectKey(key);
+        composeNeedsRefresh = true;
+        return;
+      }
+
+      // All other printable chars (lowercase only - uppercase consumed by cursor nav)
+      if (key >= 32 && key < 127) {
+        ui_task.injectKey(key);
+        composeNeedsRefresh = true;
+        return;
+      }
+      return;
+    }
+
+    // ---- RENAMING MODE ----
+    if (notes->isRenaming()) {
+      // All input goes to rename handler (debounced like editing)
+      ui_task.injectKey(key);
+      composeNeedsRefresh = true;
+      if (!notes->isRenaming()) {
+        // Exited rename mode (confirmed or cancelled)
+        ui_task.forceRefresh();
+      }
+      return;
+    }
+
+    // ---- DELETE CONFIRMATION MODE ----
+    if (notes->isConfirmingDelete()) {
+      ui_task.injectKey(key);
+      if (!notes->isConfirmingDelete()) {
+        // Exited confirm mode
+        ui_task.forceRefresh();
+      }
+      return;
+    }
+
+    // ---- FILE LIST MODE ----
+    if (notes->isInFileList()) {
+      if (key == 'q') {
+        notes->exitNotes();
+        Serial.println("Exiting notes");
+        ui_task.gotoHomeScreen();
+        return;
+      }
+
+      // Shift+Backspace on a file = delete with confirmation
+      if (key == '\b' && keyboard.wasShiftConsumed()) {
+        if (notes->startDeleteFromList()) {
+          ui_task.forceRefresh();
+        }
+        return;
+      }
+
+      // R on a file = rename
+      if (key == 'r') {
+        if (notes->startRename()) {
+          composeNeedsRefresh = true;
+          lastComposeRefresh = millis() - COMPOSE_REFRESH_INTERVAL;  // Trigger on next loop iteration
+        }
+        return;
+      }
+
+      // Normal keys pass through
+      ui_task.injectKey(key);
+      // Check if we just entered editing mode (new note via Enter)
+      if (notes->isEditing()) {
+        composeNeedsRefresh = true;
+        lastComposeRefresh = millis();  // Draw after debounce interval, not immediately
+      }
+      return;
+    }
+
+    // ---- READING MODE ----
+    if (notes->isReading()) {
+      if (key == 'q') {
+        ui_task.injectKey('q');
+        return;
+      }
+
+      // Shift+Backspace = delete note
+      if (key == '\b' && keyboard.wasShiftConsumed()) {
+        Serial.println("Notes: Deleting current note");
+        notes->deleteCurrentNote();
+        ui_task.forceRefresh();
+        return;
+      }
+
+      // All other keys (Enter for edit, W/S for page nav)
+      ui_task.injectKey(key);
+      if (notes->isEditing()) {
+        composeNeedsRefresh = true;
+        lastComposeRefresh = millis();  // Draw after debounce interval, not immediately
+      }
+      return;
+    }
+
+    return;
+  }
+
   // *** SETTINGS MODE ***
   if (ui_task.isOnSettingsScreen()) {
     SettingsScreen* settings = (SettingsScreen*)ui_task.getSettingsScreen();
 
     // Q key: exit settings (when not editing)
-    if (!settings->isEditing() && (key == 'q' || key == 'Q')) {
+    if (!settings->isEditing() && (key == 'q')) {
       if (settings->hasRadioChanges()) {
         // Let settings show "apply changes?" confirm dialog
         ui_task.injectKey(key);
@@ -790,58 +1053,136 @@ void handleKeyboardInput() {
       return;
     }
 
-    // All other keys → settings screen via injectKey (no forceRefresh)
+    // All other keys → settings screen via injectKey
     ui_task.injectKey(key);
     return;
   }
 
+  // *** REPEATER ADMIN MODE ***
+  if (ui_task.isOnRepeaterAdmin()) {
+    RepeaterAdminScreen* admin = (RepeaterAdminScreen*)ui_task.getRepeaterAdminScreen();
+    RepeaterAdminScreen::AdminState astate = admin->getState();
+    bool shiftDel = (key == '\b' && keyboard.wasShiftConsumed());
+
+    // In password entry: Shift+Del exits, all other keys pass through normally
+    if (astate == RepeaterAdminScreen::STATE_PASSWORD_ENTRY) {
+      if (shiftDel) {
+        Serial.println("Nav: Back to contacts from admin login");
+        ui_task.gotoContactsScreen();
+      } else {
+        ui_task.injectKey(key);
+      }
+      return;
+    }
+
+    // In menu state: Shift+Del exits to contacts, C opens compose
+    if (astate == RepeaterAdminScreen::STATE_MENU) {
+      if (shiftDel) {
+        Serial.println("Nav: Back to contacts from admin menu");
+        ui_task.gotoContactsScreen();
+        return;
+      }
+      // C key: allow entering compose mode from admin menu
+      if (key == 'c' || key == 'C') {
+        composeDM = false;
+        composeDMContactIdx = -1;
+        composeMode = true;
+        composeBuffer[0] = '\0';
+        composePos = 0;
+        drawComposeScreen();
+        lastComposeRefresh = millis();
+        return;
+      }
+      // All other keys pass to admin screen
+      ui_task.injectKey(key);
+      return;
+    }
+
+    // In waiting/response/error states: convert Shift+Del to exit signal,
+    // pass all other keys through
+    if (shiftDel) {
+      ui_task.injectKey(KEY_ADMIN_EXIT);
+    } else {
+      ui_task.injectKey(key);
+    }
+    return;
+  }
+
   // Normal mode - not composing
   switch (key) {
     case 'c':
-    case 'C':
       // Open contacts list
       Serial.println("Opening contacts");
       ui_task.gotoContactsScreen();
       break;
-
+    
     case 'm':
-    case 'M':
       // Go to channel message screen
       Serial.println("Opening channel messages");
       ui_task.gotoChannelScreen();
       break;
     
     case 'e':
-    case 'E':
       // Open text reader (ebooks)
       Serial.println("Opening text reader");
       ui_task.gotoTextReader();
       break;
     
+    case 'p':
+#ifdef MECK_AUDIO_VARIANT
+      // Open audiobook player -- lazy-init Audio + screen on first use
+      Serial.println("Opening audiobook player");
+      if (!ui_task.getAudiobookScreen()) {
+        Serial.printf("Audiobook: lazy init -- free heap: %d, largest block: %d\n",
+                       ESP.getFreeHeap(), ESP.getMaxAllocHeap());
+        audio = new Audio();
+        AudiobookPlayerScreen* abScreen = new AudiobookPlayerScreen(&ui_task, audio);
+        abScreen->setSDReady(sdCardReady);
+        ui_task.setAudiobookScreen(abScreen);
+        Serial.printf("Audiobook: init complete -- free heap: %d\n", ESP.getFreeHeap());
+      }
+      ui_task.gotoAudiobookPlayer();
+#else
+      Serial.println("Audio not available on this build variant");
+      ui_task.showAlert("No audio hardware", 1500);
+#endif
+      break;
+    
+    case 'n':
+      // Open notes
+      Serial.println("Opening notes");
+      {
+        NotesScreen* notesScr2 = (NotesScreen*)ui_task.getNotesScreen();
+        if (notesScr2) {
+          uint32_t ts = rtc_clock.getCurrentTime();
+          int8_t utcOff = the_mesh.getNodePrefs()->utc_offset_hours;
+          notesScr2->setTimestamp(ts, utcOff);
+        }
+      }
+      ui_task.gotoNotesScreen();
+      break;
+    
     case 's':
-    case 'S':
-      // Open settings (from home), or navigate down on channel/contacts
-      if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen()) {
+      // Open settings (from home), or navigate down on channel/contacts/admin
+      if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen() || ui_task.isOnRepeaterAdmin()) {
         ui_task.injectKey('s');  // Pass directly for channel/contacts scrolling
       } else {
         Serial.println("Opening settings");
         ui_task.gotoSettingsScreen();
       }
       break;
-    
+
     case 'w':
-    case 'W':
       // Navigate up/previous (scroll on channel screen)
-      if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen()) {
+      if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen() || ui_task.isOnRepeaterAdmin()) {
         ui_task.injectKey('w');  // Pass directly for channel/contacts switching
       } else {
         Serial.println("Nav: Previous");
         ui_task.injectKey(0xF2);  // KEY_PREV
       }
       break;
-    
+      
     case 'a':
-    case 'A':
       // Navigate left or switch channel (on channel screen)
       if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen()) {
         ui_task.injectKey('a');  // Pass directly for channel/contacts switching
@@ -852,7 +1193,6 @@ void handleKeyboardInput() {
       break;
       
     case 'd':
-    case 'D':
       // Navigate right or switch channel (on channel screen)
       if (ui_task.isOnChannelScreen() || ui_task.isOnContactsScreen()) {
         ui_task.injectKey('d');  // Pass directly for channel/contacts switching
@@ -863,7 +1203,8 @@ void handleKeyboardInput() {
       break;
       
     case '\r':
-      // Enter = compose (only from channel or contacts screen)
+      // Select/Enter - if on contacts screen, enter DM compose for chat contacts
+      //                or repeater admin for repeater contacts
       if (ui_task.isOnContactsScreen()) {
         ContactsScreen* cs = (ContactsScreen*)ui_task.getContactsScreen();
         int idx = cs->getSelectedContactIdx();
@@ -878,10 +1219,22 @@ void handleKeyboardInput() {
           Serial.printf("Entering DM compose to %s (idx %d)\n", composeDMName, idx);
           drawComposeScreen();
           lastComposeRefresh = millis();
+        } else if (idx >= 0 && ctype == ADV_TYPE_REPEATER) {
+          // Open repeater admin screen
+          char rname[32];
+          cs->getSelectedContactName(rname, sizeof(rname));
+          Serial.printf("Opening repeater admin for %s (idx %d)\n", rname, idx);
+          ui_task.gotoRepeaterAdmin(idx);
         } else if (idx >= 0) {
-          Serial.printf("Selected non-chat contact type=%d idx=%d\n", ctype, idx);
+          // Non-chat, non-repeater contact (room, sensor, etc.) - future use
+          Serial.printf("Selected contact type=%d idx=%d\n", ctype, idx);
         }
       } else if (ui_task.isOnChannelScreen()) {
+        // Don't enter compose if path overlay is showing
+        ChannelScreen* chScr2 = (ChannelScreen*)ui_task.getChannelScreen();
+        if (chScr2 && chScr2->isShowingPathOverlay()) {
+          break;
+        }
         composeDM = false;
         composeDMContactIdx = -1;
         composeChannelIdx = ui_task.getChannelScreenViewIdx();
@@ -898,9 +1251,16 @@ void handleKeyboardInput() {
       break;
       
     case 'q':
-    case 'Q':
     case '\b':
-      // Go back to home screen
+      // If channel screen path overlay is showing, dismiss it instead of going home
+      if (ui_task.isOnChannelScreen()) {
+        ChannelScreen* chScr = (ChannelScreen*)ui_task.getChannelScreen();
+        if (chScr && chScr->isShowingPathOverlay()) {
+          ui_task.injectKey('q');
+          break;
+        }
+      }
+      // Go back to home screen (admin mode handled above)
       Serial.println("Nav: Back to home");
       ui_task.gotoHomeScreen();
       break;
@@ -910,6 +1270,18 @@ void handleKeyboardInput() {
       Serial.println("Nav: Space (Next)");
       ui_task.injectKey(0xF1);  // KEY_NEXT
       break;
+
+    case 'u':
+      // UTC offset edit (home screen GPS page handles this)
+      ui_task.injectKey('u');
+      break;
+
+    case 'v':
+      // View path overlay (channel screen only)
+      if (ui_task.isOnChannelScreen()) {
+        ui_task.injectKey('v');
+      }
+      break;
       
     default:
       Serial.printf("Unhandled key in normal mode: '%c' (0x%02X)\n", key, key);
@@ -1058,6 +1430,8 @@ void drawEmojiPicker() {
 
 void sendComposedMessage() {
   if (composePos == 0) return;
+
+  cpuPower.setBoost();  // Boost CPU for crypto + radio TX
   
   // Convert escape bytes back to UTF-8 for mesh transmission and BLE app
   char utf8Buf[512];
@@ -1103,4 +1477,23 @@ void sendComposedMessage() {
   }
 }
 
+// ============================================================================
+// ESP32-audioI2S CALLBACKS
+// ============================================================================
+#ifdef MECK_AUDIO_VARIANT
+void audio_info(const char *info) {
+  Serial.printf("Audio: %s\n", info);
+}
+
+void audio_eof_mp3(const char *info) {
+  Serial.printf("Audio: End of file - %s\n", info);
+  // Signal the player screen for auto-advance to next track
+  AudiobookPlayerScreen* abPlayer =
+    (AudiobookPlayerScreen*)ui_task.getAudiobookScreen();
+  if (abPlayer) {
+    abPlayer->onEOF();
+  }
+}
+#endif  // MECK_AUDIO_VARIANT
+
 #endif // LilyGo_TDeck_Pro

examples/companion_radio/ui-new/ChannelScreen.h

@@ -14,6 +14,7 @@
 // Maximum messages to store in history
 #define CHANNEL_MSG_HISTORY_SIZE 300
 #define CHANNEL_MSG_TEXT_LEN 160
+#define MSG_PATH_MAX 8  // Max repeater hops stored per message
 
 #ifndef MAX_GROUP_CHANNELS
   #define MAX_GROUP_CHANNELS 20
@@ -23,7 +24,7 @@
 // On-disk format for message persistence (SD card)
 // ---------------------------------------------------------------------------
 #define MSG_FILE_MAGIC   0x4D434853  // "MCHS" - MeshCore History Store
-#define MSG_FILE_VERSION 1
+#define MSG_FILE_VERSION 2
 #define MSG_FILE_PATH    "/meshcore/messages.bin"
 
 struct __attribute__((packed)) MsgFileHeader {
@@ -41,8 +42,9 @@ struct __attribute__((packed)) MsgFileRecord {
   uint8_t  channel_idx;
   uint8_t  valid;
   uint8_t  reserved;
+  uint8_t  path[MSG_PATH_MAX];  // Repeater hop hashes (first byte of pub key)
   char     text[CHANNEL_MSG_TEXT_LEN];
-  // 168 bytes total
+  // 176 bytes total
 };
 
 class UITask;  // Forward declaration
@@ -55,6 +57,7 @@ public:
     uint32_t timestamp;
     uint8_t path_len;
     uint8_t channel_idx;  // Which channel this message belongs to
+    uint8_t path[MSG_PATH_MAX];  // Repeater hop hashes
     char text[CHANNEL_MSG_TEXT_LEN];
     bool valid;
   };
@@ -70,21 +73,24 @@ private:
   int _msgsPerPage;   // Messages that fit on screen
   uint8_t _viewChannelIdx;  // Which channel we're currently viewing
   bool _sdReady;      // SD card is available for persistence
+  bool _showPathOverlay;  // Show path detail overlay for last received msg
   
 public:
   ChannelScreen(UITask* task, mesh::RTCClock* rtc) 
     : _task(task), _rtc(rtc), _msgCount(0), _newestIdx(-1), _scrollPos(0), 
-      _msgsPerPage(CHANNEL_MSG_HISTORY_SIZE), _viewChannelIdx(0), _sdReady(false) {
+      _msgsPerPage(6), _viewChannelIdx(0), _sdReady(false), _showPathOverlay(false) {
     // Initialize all messages as invalid
     for (int i = 0; i < CHANNEL_MSG_HISTORY_SIZE; i++) {
       _messages[i].valid = false;
+      memset(_messages[i].path, 0, MSG_PATH_MAX);
     }
   }
 
   void setSDReady(bool ready) { _sdReady = ready; }
 
   // Add a new message to the history
-  void addMessage(uint8_t channel_idx, uint8_t path_len, const char* sender, const char* text) {
+  void addMessage(uint8_t channel_idx, uint8_t path_len, const char* sender, const char* text,
+                  const uint8_t* path_bytes = nullptr) {
     // Move to next slot in circular buffer
     _newestIdx = (_newestIdx + 1) % CHANNEL_MSG_HISTORY_SIZE;
     
@@ -94,6 +100,13 @@ public:
     msg->channel_idx = channel_idx;
     msg->valid = true;
     
+    // Store path hop hashes
+    memset(msg->path, 0, MSG_PATH_MAX);
+    if (path_bytes && path_len > 0 && path_len != 0xFF) {
+      int n = path_len < MSG_PATH_MAX ? path_len : MSG_PATH_MAX;
+      memcpy(msg->path, path_bytes, n);
+    }
+    
     // Sanitize emoji: replace UTF-8 emoji sequences with single-byte escape codes
     // The text already contains "Sender: message" format
     emojiSanitize(text, msg->text, CHANNEL_MSG_TEXT_LEN);
@@ -104,6 +117,7 @@ public:
     
     // Reset scroll to show newest message
     _scrollPos = 0;
+    _showPathOverlay = false;  // Dismiss overlay on new message
 
     // Persist to SD card
     saveToSD();
@@ -123,7 +137,23 @@ public:
   int getMessageCount() const { return _msgCount; }
   
   uint8_t getViewChannelIdx() const { return _viewChannelIdx; }
-  void setViewChannelIdx(uint8_t idx) { _viewChannelIdx = idx; _scrollPos = 0; }
+  void setViewChannelIdx(uint8_t idx) { _viewChannelIdx = idx; _scrollPos = 0; _showPathOverlay = false; }
+  bool isShowingPathOverlay() const { return _showPathOverlay; }
+
+  // Find the newest RECEIVED message for the current channel
+  // (path_len != 0 means received, path_len 0 = locally sent)
+  ChannelMessage* getNewestReceivedMsg() {
+    for (int i = 0; i < _msgCount; i++) {
+      int idx = _newestIdx - i;
+      while (idx < 0) idx += CHANNEL_MSG_HISTORY_SIZE;
+      idx = idx % CHANNEL_MSG_HISTORY_SIZE;
+      if (_messages[idx].valid && _messages[idx].channel_idx == _viewChannelIdx
+          && _messages[idx].path_len != 0) {
+        return &_messages[idx];
+      }
+    }
+    return nullptr;
+  }
 
   // -----------------------------------------------------------------------
   // SD card persistence
@@ -163,6 +193,7 @@ public:
       rec.channel_idx = _messages[i].channel_idx;
       rec.valid       = _messages[i].valid ? 1 : 0;
       rec.reserved    = 0;
+      memcpy(rec.path, _messages[i].path, MSG_PATH_MAX);
       memcpy(rec.text, _messages[i].text, CHANNEL_MSG_TEXT_LEN);
       f.write((uint8_t*)&rec, sizeof(rec));
     }
@@ -228,6 +259,7 @@ public:
       _messages[i].path_len    = rec.path_len;
       _messages[i].channel_idx = rec.channel_idx;
       _messages[i].valid       = (rec.valid != 0);
+      memcpy(_messages[i].path, rec.path, MSG_PATH_MAX);
       memcpy(_messages[i].text, rec.text, CHANNEL_MSG_TEXT_LEN);
       if (_messages[i].valid) loaded++;
     }
@@ -280,6 +312,120 @@ public:
     // Divider line
     display.drawRect(0, 11, display.width(), 1);
     
+    // --- Path detail overlay ---
+    if (_showPathOverlay) {
+      display.setTextSize(0);
+      int lineH = 9;
+      int y = 14;
+      
+      ChannelMessage* msg = getNewestReceivedMsg();
+      if (!msg) {
+        display.setCursor(0, y);
+        display.setColor(DisplayDriver::LIGHT);
+        display.print("No received messages");
+      } else {
+        // Message preview (first ~30 chars)
+        display.setCursor(0, y);
+        display.setColor(DisplayDriver::LIGHT);
+        char preview[32];
+        strncpy(preview, msg->text, 31);
+        preview[31] = '\0';
+        display.print(preview);
+        y += lineH;
+        
+        // Age
+        uint32_t age = _rtc->getCurrentTime() - msg->timestamp;
+        display.setCursor(0, y);
+        display.setColor(DisplayDriver::YELLOW);
+        if (age < 60) sprintf(tmp, "Age: %ds", age);
+        else if (age < 3600) sprintf(tmp, "Age: %dm", age / 60);
+        else if (age < 86400) sprintf(tmp, "Age: %dh", age / 3600);
+        else sprintf(tmp, "Age: %dd", age / 86400);
+        display.print(tmp);
+        y += lineH;
+        
+        // Route type
+        display.setCursor(0, y);
+        uint8_t plen = msg->path_len;
+        if (plen == 0xFF) {
+          display.setColor(DisplayDriver::LIGHT);
+          display.print("Route: Direct");
+        } else if (plen == 0) {
+          display.setColor(DisplayDriver::LIGHT);
+          display.print("Route: Local/Sent");
+        } else {
+          display.setColor(DisplayDriver::GREEN);
+          sprintf(tmp, "Route: %d hop%s", plen, plen == 1 ? "" : "s");
+          display.print(tmp);
+        }
+        y += lineH + 2;
+        
+        // Show each hop resolved against contacts
+        if (plen > 0 && plen != 0xFF) {
+          int displayHops = plen < MSG_PATH_MAX ? plen : MSG_PATH_MAX;
+          int maxY = display.height() - 26;
+          
+          for (int h = 0; h < displayHops && y + lineH <= maxY; h++) {
+            uint8_t hopHash = msg->path[h];
+            display.setCursor(0, y);
+            display.setColor(DisplayDriver::LIGHT);
+            sprintf(tmp, " %d: ", h + 1);
+            display.print(tmp);
+            
+            // Try to resolve: prefer repeaters, then any contact
+            bool resolved = false;
+            int numContacts = the_mesh.getNumContacts();
+            ContactInfo contact;
+            
+            // First pass: repeaters only
+            for (uint32_t ci = 0; ci < numContacts && !resolved; ci++) {
+              if (the_mesh.getContactByIdx(ci, contact)) {
+                if (contact.id.pub_key[0] == hopHash && contact.type == ADV_TYPE_REPEATER) {
+                  display.setColor(DisplayDriver::GREEN);
+                  display.print(contact.name);
+                  resolved = true;
+                }
+              }
+            }
+            // Second pass: any contact type
+            if (!resolved) {
+              for (uint32_t ci = 0; ci < numContacts; ci++) {
+                if (the_mesh.getContactByIdx(ci, contact)) {
+                  if (contact.id.pub_key[0] == hopHash) {
+                    display.setColor(DisplayDriver::YELLOW);
+                    display.print(contact.name);
+                    resolved = true;
+                    break;
+                  }
+                }
+              }
+            }
+            // Fallback: show hex hash
+            if (!resolved) {
+              display.setColor(DisplayDriver::LIGHT);
+              sprintf(tmp, "?%02X", hopHash);
+              display.print(tmp);
+            }
+            y += lineH;
+          }
+        }
+      }
+      
+      // Overlay footer
+      display.setTextSize(1);
+      int footerY = display.height() - 12;
+      display.drawRect(0, footerY - 2, display.width(), 1);
+      display.setCursor(0, footerY);
+      display.setColor(DisplayDriver::YELLOW);
+      display.print("Q:Back");
+
+#if AUTO_OFF_MILLIS == 0
+      return 5000;
+#else
+      return 1000;
+#endif
+    }
+    
     if (channelMsgCount == 0) {
       display.setTextSize(0);  // Tiny font for body text
       display.setCursor(0, 20);
@@ -295,6 +441,7 @@ public:
       int lineHeight = 9;   // 8px font + 1px spacing
       int headerHeight = 14;
       int footerHeight = 14;
+      int scrollBarW = 4;   // Width of scroll indicator on right edge
       // Hard cutoff: no text may START at or beyond this y value
       // This ensures rendered glyphs (which extend lineHeight below y) stay above the footer
       int maxY = display.height() - footerHeight;
@@ -302,7 +449,8 @@ public:
       int y = headerHeight;
       
       // Build list of messages for this channel (newest first)
-      int channelMsgs[CHANNEL_MSG_HISTORY_SIZE];
+      // Static to avoid 1200-byte stack allocation every render cycle
+      static int channelMsgs[CHANNEL_MSG_HISTORY_SIZE];
       int numChannelMsgs = 0;
       
       for (int i = 0; i < _msgCount && numChannelMsgs < CHANNEL_MSG_HISTORY_SIZE; i++) {
@@ -320,6 +468,10 @@ public:
         int tmp = channelMsgs[l]; channelMsgs[l] = channelMsgs[r]; channelMsgs[r] = tmp;
       }
       
+      // Clamp scroll position to valid range
+      int maxScroll = numChannelMsgs > _msgsPerPage ? numChannelMsgs - _msgsPerPage : 0;
+      if (_scrollPos > maxScroll) _scrollPos = maxScroll;
+      
       // Calculate start index so newest messages appear at the bottom
       // scrollPos=0 shows the most recent messages, scrollPos++ scrolls up to older
       int startIdx = numChannelMsgs - _msgsPerPage - _scrollPos;
@@ -361,7 +513,7 @@ public:
         
         // Track position in pixels for emoji placement
         // Uses advance width (cursor movement) not bounding box for px tracking
-        int lineW = display.width();
+        int lineW = display.width() - scrollBarW - 1;  // Reserve space for scroll bar
         int px = display.getTextWidth(tmp);  // Pixel X after timestamp
         char dblStr[3] = {0, 0, 0};
         
@@ -460,13 +612,39 @@ public:
         if (y + lineHeight > maxY) screenFull = true;
       }
       
-      // Only update _msgsPerPage when the screen actually filled up.
-      // If we ran out of messages before filling the screen, keep the
-      // previous (higher) value so startIdx doesn't under-count.
-      if (screenFull && msgsDrawn > 0) {
+      // Only update _msgsPerPage when at the bottom (scrollPos==0) and the
+      // screen actually filled up.  While scrolled, freezing _msgsPerPage
+      // prevents a feedback loop where variable-height messages cause
+      // msgsPerPage to oscillate, shifting startIdx every render (flicker).
+      if (screenFull && msgsDrawn > 0 && _scrollPos == 0) {
         _msgsPerPage = msgsDrawn;
       }
       
+      // --- Scroll bar (emoji picker style) ---
+      int sbX = display.width() - scrollBarW;
+      int sbTop = headerHeight;
+      int sbHeight = maxY - headerHeight;
+      
+      // Draw track outline
+      display.setColor(DisplayDriver::LIGHT);
+      display.drawRect(sbX, sbTop, scrollBarW, sbHeight);
+      
+      if (channelMsgCount > _msgsPerPage) {
+        // Scrollable: draw proportional thumb
+        int maxScroll = channelMsgCount - _msgsPerPage;
+        if (maxScroll < 1) maxScroll = 1;
+        int thumbH = (_msgsPerPage * sbHeight) / channelMsgCount;
+        if (thumbH < 4) thumbH = 4;
+        // _scrollPos=0 is newest (bottom), so invert for thumb position
+        int thumbY = sbTop + ((maxScroll - _scrollPos) * (sbHeight - thumbH)) / maxScroll;
+        for (int ty = thumbY + 1; ty < thumbY + thumbH - 1; ty++)
+          display.drawRect(sbX + 1, ty, scrollBarW - 2, 1);
+      } else {
+        // All messages fit: fill entire track
+        for (int ty = sbTop + 1; ty < sbTop + sbHeight - 1; ty++)
+          display.drawRect(sbX + 1, ty, scrollBarW - 2, 1);
+      }
+      
       display.setTextSize(1);  // Restore for footer
     }
     
@@ -476,11 +654,11 @@ public:
     display.setCursor(0, footerY);
     display.setColor(DisplayDriver::YELLOW);
     
-    // Left side: Q:Back A/D:Ch
-    display.print("Q:Back A/D:Ch");
+    // Left side: abbreviated controls
+    display.print("Q:Bck A/D:Ch V:Pth");
     
-    // Right side: Entr:New
-    const char* rightText = "Entr:New";
+    // Right side: Ent:New
+    const char* rightText = "Ent:New";
     display.setCursor(display.width() - display.getTextWidth(rightText) - 2, footerY);
     display.print(rightText);
 
@@ -492,8 +670,26 @@ public:
   }
 
   bool handleInput(char c) override {
+    // If overlay is showing, only handle dismiss
+    if (_showPathOverlay) {
+      if (c == 'q' || c == 'Q' || c == '\b' || c == 'v' || c == 'V') {
+        _showPathOverlay = false;
+        return true;
+      }
+      return true;  // Consume all keys while overlay is up
+    }
+    
     int channelMsgCount = getMessageCountForChannel();
     
+    // V - show path detail for last received message
+    if (c == 'v' || c == 'V') {
+      if (getNewestReceivedMsg() != nullptr) {
+        _showPathOverlay = true;
+        return true;
+      }
+      return false;  // No received messages to show
+    }
+    
     // W or KEY_PREV - scroll up (older messages)
     if (c == 0xF2 || c == 'w' || c == 'W') {
       if (_scrollPos + _msgsPerPage < channelMsgCount) {

examples/companion_radio/ui-new/Epubprocessor.h

@@ -2,8 +2,8 @@
 // =============================================================================
 // EpubProcessor.h - Convert EPUB files to plain text for TextReaderScreen
 //
-// Pipeline: EPUB (ZIP) → container.xml → OPF spine → extract chapters →
-//           strip XHTML tags → concatenated plain text → cached .txt on SD
+// Pipeline: EPUB (ZIP) → container.xml → OPF spine → extract chapters →
+//           strip XHTML tags → concatenated plain text → cached .txt on SD
 //
 // The resulting .txt file is placed in /books/ and picked up automatically
 // by TextReaderScreen's existing pagination, indexing, and bookmarking.
@@ -14,6 +14,7 @@
 #include <SD.h>
 #include <FS.h>
 #include "EpubZipReader.h"
+#include "Utf8CP437.h"
 
 // Maximum chapters in spine (most novels have 20-80)
 #define EPUB_MAX_CHAPTERS 200
@@ -426,7 +427,7 @@ private:
   //
   // Handles:
   //   - Tag removal (everything between < and >)
-  //   - <p>, <br>, <div>, <h1>-<h6> → newlines
+  //   - <p>, <br>, <div>, <h1>-<h6> → newlines
   //   - HTML entity decoding (&amp; &lt; &gt; &quot; &apos; &#NNN; &#xHH;)
   //   - Collapse multiple whitespace/newlines
   //   - Skip <head>, <style>, <script> content entirely
@@ -547,9 +548,9 @@ private:
         }
       }
 
-      // Handle UTF-8 multi-byte sequences (smart quotes, em dashes, etc.)
-      // These appear as raw bytes in XHTML and must be mapped to ASCII
-      // since the e-ink font only supports ASCII characters.
+      // Handle UTF-8 multi-byte sequences (smart quotes, em dashes, accented chars, etc.)
+      // These appear as raw bytes in XHTML. Typographic chars are mapped to ASCII;
+      // accented Latin chars are preserved as UTF-8 for CP437 rendering on e-ink.
       if ((uint8_t)c >= 0xC0) {
         uint32_t codepoint = 0;
         int extraBytes = 0;
@@ -579,7 +580,8 @@ private:
         if (valid && extraBytes > 0) {
           p += extraBytes;  // Skip continuation bytes (loop increments past lead byte)
 
-          // Map Unicode codepoints to ASCII equivalents
+          // Map Unicode codepoints to displayable equivalents
+          // Typographic chars → ASCII, accented chars → preserved as UTF-8
           char mapped = 0;
           switch (codepoint) {
             case 0x2018: case 0x2019: mapped = '\''; break;  // Smart single quotes
@@ -598,6 +600,21 @@ private:
             default:
               if (codepoint >= 0x20 && codepoint < 0x7F) {
                 mapped = (char)codepoint;  // Basic ASCII range
+              } else if (unicodeToCP437(codepoint)) {
+                // Accented character that the e-ink font can render via CP437.
+                // Preserve as UTF-8 in the output; the text reader will decode
+                // and map to CP437 at render time.
+                if (codepoint <= 0x7FF) {
+                  output[outPos++] = 0xC0 | (codepoint >> 6);
+                  output[outPos++] = 0x80 | (codepoint & 0x3F);
+                } else if (codepoint <= 0xFFFF) {
+                  output[outPos++] = 0xE0 | (codepoint >> 12);
+                  output[outPos++] = 0x80 | ((codepoint >> 6) & 0x3F);
+                  output[outPos++] = 0x80 | (codepoint & 0x3F);
+                }
+                lastWasNewline = false;
+                lastWasSpace = false;
+                continue;  // Already wrote to output
               } else {
                 continue;  // Skip unmappable characters
               }
@@ -608,7 +625,7 @@ private:
           continue;  // Skip malformed UTF-8
         }
       } else if ((uint8_t)c >= 0x80) {
-        // Stray continuation byte (0x80-0xBF) — skip
+        // Stray continuation byte (0x80-0xBF) — skip
         continue;
       }
 
@@ -683,6 +700,37 @@ private:
     if (entityLen == 5 && strncmp(entity, "ldquo", 5) == 0) return '"';
     if (entityLen == 5 && strncmp(entity, "rdquo", 5) == 0) return '"';
 
+    // Common accented character entities → CP437 bytes for built-in font
+    if (entityLen == 6 && strncmp(entity, "eacute", 6) == 0) return (char)0x82;  // é
+    if (entityLen == 6 && strncmp(entity, "egrave", 6) == 0) return (char)0x8A;  // è
+    if (entityLen == 5 && strncmp(entity, "ecirc", 5) == 0) return (char)0x88;   // ê
+    if (entityLen == 4 && strncmp(entity, "euml", 4) == 0) return (char)0x89;    // ë
+    if (entityLen == 6 && strncmp(entity, "agrave", 6) == 0) return (char)0x85;  // à
+    if (entityLen == 6 && strncmp(entity, "aacute", 6) == 0) return (char)0xA0;  // á
+    if (entityLen == 5 && strncmp(entity, "acirc", 5) == 0) return (char)0x83;   // â
+    if (entityLen == 4 && strncmp(entity, "auml", 4) == 0) return (char)0x84;    // ä
+    if (entityLen == 6 && strncmp(entity, "ccedil", 6) == 0) return (char)0x87;  // ç
+    if (entityLen == 6 && strncmp(entity, "iacute", 6) == 0) return (char)0xA1;  // í
+    if (entityLen == 5 && strncmp(entity, "icirc", 5) == 0) return (char)0x8C;   // î
+    if (entityLen == 4 && strncmp(entity, "iuml", 4) == 0) return (char)0x8B;    // ï
+    if (entityLen == 6 && strncmp(entity, "igrave", 6) == 0) return (char)0x8D;  // ì
+    if (entityLen == 6 && strncmp(entity, "oacute", 6) == 0) return (char)0xA2;  // ó
+    if (entityLen == 5 && strncmp(entity, "ocirc", 5) == 0) return (char)0x93;   // ô
+    if (entityLen == 4 && strncmp(entity, "ouml", 4) == 0) return (char)0x94;    // ö
+    if (entityLen == 6 && strncmp(entity, "ograve", 6) == 0) return (char)0x95;  // ò
+    if (entityLen == 6 && strncmp(entity, "uacute", 6) == 0) return (char)0xA3;  // ú
+    if (entityLen == 5 && strncmp(entity, "ucirc", 5) == 0) return (char)0x96;   // û
+    if (entityLen == 4 && strncmp(entity, "uuml", 4) == 0) return (char)0x81;    // ü
+    if (entityLen == 6 && strncmp(entity, "ugrave", 6) == 0) return (char)0x97;  // ù
+    if (entityLen == 6 && strncmp(entity, "ntilde", 6) == 0) return (char)0xA4;  // ñ
+    if (entityLen == 6 && strncmp(entity, "Eacute", 6) == 0) return (char)0x90;  // É
+    if (entityLen == 6 && strncmp(entity, "Ccedil", 6) == 0) return (char)0x80;  // Ç
+    if (entityLen == 6 && strncmp(entity, "Ntilde", 6) == 0) return (char)0xA5;  // Ñ
+    if (entityLen == 4 && strncmp(entity, "Auml", 4) == 0) return (char)0x8E;    // Ä
+    if (entityLen == 4 && strncmp(entity, "Ouml", 4) == 0) return (char)0x99;    // Ö
+    if (entityLen == 4 && strncmp(entity, "Uuml", 4) == 0) return (char)0x9A;    // Ü
+    if (entityLen == 5 && strncmp(entity, "szlig", 5) == 0) return (char)0xE1;   // ß
+
     // Numeric entities: &#NNN; or &#xHH;
     if (entityLen >= 2 && entity[0] == '#') {
       int codepoint = 0;
@@ -701,14 +749,13 @@ private:
           if (ch >= '0' && ch <= '9') codepoint = codepoint * 10 + (ch - '0');
         }
       }
-      // Map to ASCII (best effort - e-ink font is ASCII only)
+      // Map to displayable character (best effort)
       if (codepoint >= 32 && codepoint < 127) return (char)codepoint;
       if (codepoint == 160) return ' ';   // non-breaking space
-      if (codepoint == 8211 || codepoint == 8212) return '-';  // en/em dash
-      if (codepoint == 8216 || codepoint == 8217) return '\''; // smart quotes
-      if (codepoint == 8220 || codepoint == 8221) return '"';  // smart quotes
-      if (codepoint == 8230) return '.';   // ellipsis
-      if (codepoint == 8226) return '*';   // bullet
+      // Try CP437 mapping for accented characters.
+      // The byte value will be passed through to the built-in font.
+      uint8_t cp437 = unicodeToCP437(codepoint);
+      if (cp437) return (char)cp437;
       // Unknown codepoint > 127: skip it
       return ' ';
     }

examples/companion_radio/ui-new/M4BMetadata.h

@@ -0,0 +1,651 @@
+#pragma once
+
+// =============================================================================
+// M4BMetadata.h - Lightweight MP4/M4B atom parser for metadata extraction
+//
+// Walks the MP4 atom (box) tree to extract:
+//   - Title     (moov/udta/meta/ilst/©nam)
+//   - Author    (moov/udta/meta/ilst/©ART)
+//   - Cover art (moov/udta/meta/ilst/covr) - JPEG offset+size within file
+//   - Duration  (moov/mvhd timescale + duration)
+//   - Chapter markers (moov/udta/chpl) - Nero-style chapter list
+//
+// Designed for embedded use: no dynamic allocation, reads directly from SD
+// via Arduino File API, uses a small stack buffer for atom headers.
+//
+// Usage:
+//   M4BMetadata meta;
+//   File f = SD.open("/audiobooks/mybook.m4b");
+//   if (meta.parse(f)) {
+//     Serial.printf("Title: %s\n", meta.title);
+//     Serial.printf("Author: %s\n", meta.author);
+//     if (meta.hasCoverArt) {
+//       // JPEG data is at meta.coverOffset, meta.coverSize bytes
+//     }
+//   }
+//   f.close();
+// =============================================================================
+
+#include <SD.h>
+
+// Maximum metadata string lengths (including null terminator)
+#define M4B_MAX_TITLE    128
+#define M4B_MAX_AUTHOR   64
+#define M4B_MAX_CHAPTERS 100
+
+struct M4BChapter {
+  uint32_t startMs;    // Chapter start time in milliseconds
+  char     name[48];   // Chapter title (truncated to fit)
+};
+
+class M4BMetadata {
+public:
+  // Extracted metadata
+  char     title[M4B_MAX_TITLE];
+  char     author[M4B_MAX_AUTHOR];
+  bool     hasCoverArt;
+  uint32_t coverOffset;   // Byte offset of JPEG/PNG data within file
+  uint32_t coverSize;     // Size of cover image data in bytes
+  uint8_t  coverFormat;   // 13=JPEG, 14=PNG (from MP4 well-known type)
+  uint32_t durationMs;    // Total duration in milliseconds
+  uint32_t sampleRate;    // Audio sample rate (from audio stsd)
+  uint32_t bitrate;       // Approximate bitrate in bps
+
+  // Chapter data
+  M4BChapter chapters[M4B_MAX_CHAPTERS];
+  int        chapterCount;
+
+  M4BMetadata() { clear(); }
+
+  void clear() {
+    title[0] = '\0';
+    author[0] = '\0';
+    hasCoverArt = false;
+    coverOffset = 0;
+    coverSize = 0;
+    coverFormat = 0;
+    durationMs = 0;
+    sampleRate = 44100;
+    bitrate = 0;
+    chapterCount = 0;
+  }
+
+  // Parse an open file. Returns true if at least title or duration was found.
+  // File position is NOT preserved — caller should seek as needed afterward.
+  bool parse(File& file) {
+    clear();
+    if (!file || file.size() < 8) return false;
+
+    _fileSize = file.size();
+
+    // Walk top-level atoms looking for 'moov'
+    uint32_t pos = 0;
+    while (pos < _fileSize) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      if (hdr.type == ATOM_MOOV) {
+        parseMoov(file, hdr.dataOffset, hdr.dataOffset + hdr.dataSize);
+        break;  // moov found and parsed, we're done
+      }
+
+      // Skip to next top-level atom
+      pos += hdr.size;
+      if (hdr.size == 0) break;  // size=0 means "extends to EOF"
+    }
+
+    return (title[0] != '\0' || durationMs > 0);
+  }
+
+  // Get chapter index for a given playback position (milliseconds).
+  // Returns -1 if no chapters or position is before first chapter.
+  int getChapterForPosition(uint32_t positionMs) const {
+    if (chapterCount == 0) return -1;
+    int ch = 0;
+    for (int i = 1; i < chapterCount; i++) {
+      if (chapters[i].startMs > positionMs) break;
+      ch = i;
+    }
+    return ch;
+  }
+
+  // Get the start position of the next chapter after the given position.
+  // Returns 0 if no next chapter.
+  uint32_t getNextChapterMs(uint32_t positionMs) const {
+    for (int i = 0; i < chapterCount; i++) {
+      if (chapters[i].startMs > positionMs) return chapters[i].startMs;
+    }
+    return 0;
+  }
+
+  // Get the start position of the current or previous chapter.
+  uint32_t getPrevChapterMs(uint32_t positionMs) const {
+    uint32_t prev = 0;
+    for (int i = 0; i < chapterCount; i++) {
+      if (chapters[i].startMs >= positionMs) break;
+      prev = chapters[i].startMs;
+    }
+    return prev;
+  }
+
+private:
+  uint32_t _fileSize;
+
+  // MP4 atom type codes (big-endian FourCC)
+  static constexpr uint32_t ATOM_MOOV = 0x6D6F6F76;  // 'moov'
+  static constexpr uint32_t ATOM_MVHD = 0x6D766864;  // 'mvhd'
+  static constexpr uint32_t ATOM_UDTA = 0x75647461;  // 'udta'
+  static constexpr uint32_t ATOM_META = 0x6D657461;  // 'meta'
+  static constexpr uint32_t ATOM_ILST = 0x696C7374;  // 'ilst'
+  static constexpr uint32_t ATOM_NAM  = 0xA96E616D;  // '©nam'
+  static constexpr uint32_t ATOM_ART  = 0xA9415254;  // '©ART'
+  static constexpr uint32_t ATOM_COVR = 0x636F7672;  // 'covr'
+  static constexpr uint32_t ATOM_DATA = 0x64617461;  // 'data'
+  static constexpr uint32_t ATOM_CHPL = 0x6368706C;  // 'chpl' (Nero chapters)
+  static constexpr uint32_t ATOM_TRAK = 0x7472616B;  // 'trak'
+  static constexpr uint32_t ATOM_MDIA = 0x6D646961;  // 'mdia'
+  static constexpr uint32_t ATOM_MDHD = 0x6D646864;  // 'mdhd'
+  static constexpr uint32_t ATOM_HDLR = 0x68646C72;  // 'hdlr'
+
+  struct AtomHeader {
+    uint32_t type;
+    uint64_t size;        // Total atom size including header
+    uint32_t dataOffset;  // File offset where data begins (after header)
+    uint64_t dataSize;    // size - header_length
+  };
+
+  // Read a 32-bit big-endian value from file at current position
+  static uint32_t readU32BE(File& file) {
+    uint8_t buf[4];
+    file.read(buf, 4);
+    return ((uint32_t)buf[0] << 24) | ((uint32_t)buf[1] << 16) |
+           ((uint32_t)buf[2] << 8)  | buf[3];
+  }
+
+  // Read a 64-bit big-endian value
+  static uint64_t readU64BE(File& file) {
+    uint32_t hi = readU32BE(file);
+    uint32_t lo = readU32BE(file);
+    return ((uint64_t)hi << 32) | lo;
+  }
+
+  // Read a 16-bit big-endian value
+  static uint16_t readU16BE(File& file) {
+    uint8_t buf[2];
+    file.read(buf, 2);
+    return ((uint16_t)buf[0] << 8) | buf[1];
+  }
+
+  // Read atom header at given file offset
+  bool readAtomHeader(File& file, uint32_t offset, AtomHeader& hdr) {
+    if (offset + 8 > _fileSize) return false;
+
+    file.seek(offset);
+    uint32_t size32 = readU32BE(file);
+    hdr.type = readU32BE(file);
+
+    if (size32 == 1) {
+      // 64-bit extended size
+      if (offset + 16 > _fileSize) return false;
+      hdr.size = readU64BE(file);
+      hdr.dataOffset = offset + 16;
+      hdr.dataSize = (hdr.size > 16) ? hdr.size - 16 : 0;
+    } else if (size32 == 0) {
+      // Atom extends to end of file
+      hdr.size = _fileSize - offset;
+      hdr.dataOffset = offset + 8;
+      hdr.dataSize = hdr.size - 8;
+    } else {
+      hdr.size = size32;
+      hdr.dataOffset = offset + 8;
+      hdr.dataSize = (size32 > 8) ? size32 - 8 : 0;
+    }
+
+    return true;
+  }
+
+  // Parse the moov container atom
+  void parseMoov(File& file, uint32_t start, uint32_t end) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      switch (hdr.type) {
+        case ATOM_MVHD:
+          parseMvhd(file, hdr.dataOffset, (uint32_t)hdr.dataSize);
+          break;
+        case ATOM_UDTA:
+          parseUdta(file, hdr.dataOffset, hdr.dataOffset + (uint32_t)hdr.dataSize);
+          break;
+        case ATOM_TRAK:
+          break;
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // Parse mvhd (movie header) for duration
+  void parseMvhd(File& file, uint32_t offset, uint32_t size) {
+    file.seek(offset);
+    uint8_t version = file.read();
+
+    if (version == 0) {
+      file.seek(offset + 4);   // skip version(1) + flags(3)
+      /* create_time */ readU32BE(file);
+      /* modify_time */ readU32BE(file);
+      uint32_t timescale = readU32BE(file);
+      uint32_t duration = readU32BE(file);
+      if (timescale > 0) {
+        durationMs = (uint32_t)((uint64_t)duration * 1000 / timescale);
+      }
+    } else if (version == 1) {
+      file.seek(offset + 4);
+      /* create_time */ readU64BE(file);
+      /* modify_time */ readU64BE(file);
+      uint32_t timescale = readU32BE(file);
+      uint64_t duration = readU64BE(file);
+      if (timescale > 0) {
+        durationMs = (uint32_t)(duration * 1000 / timescale);
+      }
+    }
+  }
+
+  // Parse udta container — contains meta and/or chpl
+  void parseUdta(File& file, uint32_t start, uint32_t end) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      if (hdr.type == ATOM_META) {
+        parseMeta(file, hdr.dataOffset + 4,
+                  hdr.dataOffset + (uint32_t)hdr.dataSize);
+      } else if (hdr.type == ATOM_CHPL) {
+        parseChpl(file, hdr.dataOffset, (uint32_t)hdr.dataSize);
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // Parse meta container — contains hdlr + ilst
+  void parseMeta(File& file, uint32_t start, uint32_t end) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      if (hdr.type == ATOM_ILST) {
+        parseIlst(file, hdr.dataOffset, hdr.dataOffset + (uint32_t)hdr.dataSize);
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // Parse ilst (iTunes metadata list) — contains ©nam, ©ART, covr etc.
+  void parseIlst(File& file, uint32_t start, uint32_t end) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      switch (hdr.type) {
+        case ATOM_NAM:
+          extractTextData(file, hdr.dataOffset,
+                          hdr.dataOffset + (uint32_t)hdr.dataSize,
+                          title, M4B_MAX_TITLE);
+          break;
+        case ATOM_ART:
+          extractTextData(file, hdr.dataOffset,
+                          hdr.dataOffset + (uint32_t)hdr.dataSize,
+                          author, M4B_MAX_AUTHOR);
+          break;
+        case ATOM_COVR:
+          extractCoverData(file, hdr.dataOffset,
+                           hdr.dataOffset + (uint32_t)hdr.dataSize);
+          break;
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // Extract text from a 'data' sub-atom within an ilst entry.
+  void extractTextData(File& file, uint32_t start, uint32_t end,
+                       char* dest, int maxLen) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      if (hdr.type == ATOM_DATA && hdr.dataSize > 8) {
+        uint32_t textOffset = hdr.dataOffset + 8;
+        uint32_t textLen = (uint32_t)hdr.dataSize - 8;
+        if (textLen > (uint32_t)(maxLen - 1)) textLen = maxLen - 1;
+
+        file.seek(textOffset);
+        file.read((uint8_t*)dest, textLen);
+        dest[textLen] = '\0';
+        return;
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // Extract cover art location from 'data' sub-atom within covr.
+  void extractCoverData(File& file, uint32_t start, uint32_t end) {
+    uint32_t pos = start;
+    while (pos < end) {
+      AtomHeader hdr;
+      if (!readAtomHeader(file, pos, hdr)) break;
+      if (hdr.size < 8) break;
+
+      if (hdr.type == ATOM_DATA && hdr.dataSize > 8) {
+        file.seek(hdr.dataOffset);
+        uint32_t typeIndicator = readU32BE(file);
+        uint8_t wellKnownType = typeIndicator & 0xFF;
+
+        coverOffset = hdr.dataOffset + 8;
+        coverSize = (uint32_t)hdr.dataSize - 8;
+        coverFormat = wellKnownType;  // 13=JPEG, 14=PNG
+        hasCoverArt = (coverSize > 0);
+
+        Serial.printf("M4B: Cover art found - %s, %u bytes at offset %u\n",
+                      wellKnownType == 13 ? "JPEG" :
+                      wellKnownType == 14 ? "PNG" : "unknown",
+                      coverSize, coverOffset);
+        return;
+      }
+
+      pos += (uint32_t)hdr.size;
+    }
+  }
+
+  // =====================================================================
+  // ID3v2 Parser for MP3 files
+  // =====================================================================
+public:
+  // Parse ID3v2 tags from an MP3 file. Extracts title (TIT2), artist
+  // (TPE1), and cover art (APIC). Fills the same metadata fields as
+  // the M4B parser so decodeCoverArt() works unchanged.
+  bool parseID3v2(File& file) {
+    clear();
+    if (!file || file.size() < 10) return false;
+
+    file.seek(0);
+    uint8_t hdr[10];
+    if (file.read(hdr, 10) != 10) return false;
+
+    // Verify "ID3" magic
+    if (hdr[0] != 'I' || hdr[1] != 'D' || hdr[2] != '3') {
+      Serial.println("ID3: No ID3v2 header found");
+      return false;
+    }
+
+    uint8_t versionMajor = hdr[3];  // 3 = ID3v2.3, 4 = ID3v2.4
+    bool v24 = (versionMajor == 4);
+    bool hasExtHeader = (hdr[5] & 0x40) != 0;
+
+    // Tag size is syncsafe integer (4 x 7-bit bytes)
+    uint32_t tagSize = ((uint32_t)(hdr[6] & 0x7F) << 21) |
+                       ((uint32_t)(hdr[7] & 0x7F) << 14) |
+                       ((uint32_t)(hdr[8] & 0x7F) << 7)  |
+                       (hdr[9] & 0x7F);
+
+    uint32_t tagEnd = 10 + tagSize;
+    if (tagEnd > file.size()) tagEnd = file.size();
+
+    Serial.printf("ID3: v2.%d, %u bytes\n", versionMajor, tagSize);
+
+    // Skip extended header if present
+    uint32_t pos = 10;
+    if (hasExtHeader && pos + 4 < tagEnd) {
+      file.seek(pos);
+      uint32_t extSize;
+      if (v24) {
+        uint8_t eb[4];
+        file.read(eb, 4);
+        extSize = ((uint32_t)(eb[0] & 0x7F) << 21) |
+                  ((uint32_t)(eb[1] & 0x7F) << 14) |
+                  ((uint32_t)(eb[2] & 0x7F) << 7)  |
+                  (eb[3] & 0x7F);
+      } else {
+        extSize = readU32BE(file) + 4;
+      }
+      pos += extSize;
+    }
+
+    // Walk ID3v2 frames
+    bool foundTitle = false, foundArtist = false, foundCover = false;
+
+    while (pos + 10 < tagEnd) {
+      file.seek(pos);
+      uint8_t fhdr[10];
+      if (file.read(fhdr, 10) != 10) break;
+
+      if (fhdr[0] == 0) break;
+
+      char frameId[5] = { (char)fhdr[0], (char)fhdr[1],
+                          (char)fhdr[2], (char)fhdr[3], '\0' };
+
+      uint32_t frameSize;
+      if (v24) {
+        frameSize = ((uint32_t)(fhdr[4] & 0x7F) << 21) |
+                    ((uint32_t)(fhdr[5] & 0x7F) << 14) |
+                    ((uint32_t)(fhdr[6] & 0x7F) << 7)  |
+                    (fhdr[7] & 0x7F);
+      } else {
+        frameSize = ((uint32_t)fhdr[4] << 24) | ((uint32_t)fhdr[5] << 16) |
+                    ((uint32_t)fhdr[6] << 8)  | fhdr[7];
+      }
+
+      if (frameSize == 0 || pos + 10 + frameSize > tagEnd) break;
+
+      uint32_t dataStart = pos + 10;
+
+      // --- TIT2 (Title) ---
+      if (!foundTitle && strcmp(frameId, "TIT2") == 0 && frameSize > 1) {
+        id3ExtractText(file, dataStart, frameSize, title, M4B_MAX_TITLE);
+        foundTitle = (title[0] != '\0');
+      }
+      // --- TPE1 (Artist/Author) ---
+      if (!foundArtist && strcmp(frameId, "TPE1") == 0 && frameSize > 1) {
+        id3ExtractText(file, dataStart, frameSize, author, M4B_MAX_AUTHOR);
+        foundArtist = (author[0] != '\0');
+      }
+      // --- APIC (Attached Picture) ---
+      if (!foundCover && strcmp(frameId, "APIC") == 0 && frameSize > 20) {
+        id3ExtractAPIC(file, dataStart, frameSize);
+        foundCover = hasCoverArt;
+      }
+
+      pos = dataStart + frameSize;
+
+      // Early exit once we have everything
+      if (foundTitle && foundArtist && foundCover) break;
+    }
+
+    if (foundTitle) Serial.printf("ID3: Title: %s\n", title);
+    if (foundArtist) Serial.printf("ID3: Author: %s\n", author);
+    return (foundTitle || foundCover);
+  }
+
+private:
+  // Extract text from a TIT2/TPE1 frame.
+  // Format: encoding(1) + text data
+  void id3ExtractText(File& file, uint32_t offset, uint32_t size,
+                      char* dest, int maxLen) {
+    file.seek(offset);
+    uint8_t encoding = file.read();
+    uint32_t textLen = size - 1;
+    if (textLen == 0) return;
+
+    if (encoding == 0 || encoding == 3) {
+      // ISO-8859-1 or UTF-8 — read directly
+      uint32_t readLen = (textLen < (uint32_t)(maxLen - 1))
+                         ? textLen : (uint32_t)(maxLen - 1);
+      file.read((uint8_t*)dest, readLen);
+      dest[readLen] = '\0';
+      // Strip trailing nulls
+      while (readLen > 0 && dest[readLen - 1] == '\0') readLen--;
+      dest[readLen] = '\0';
+    }
+    else if (encoding == 1 || encoding == 2) {
+      // UTF-16 (with or without BOM) — crude ASCII extraction
+      // Static buffer to avoid stack overflow (loopTask has limited stack)
+      static uint8_t u16buf[128];
+      uint32_t readLen = (textLen > sizeof(u16buf)) ? sizeof(u16buf) : textLen;
+      file.read(u16buf, readLen);
+
+      uint32_t srcStart = 0;
+      // Skip BOM if present
+      if (readLen >= 2 && ((u16buf[0] == 0xFF && u16buf[1] == 0xFE) ||
+                           (u16buf[0] == 0xFE && u16buf[1] == 0xFF))) {
+        srcStart = 2;
+      }
+      bool littleEndian = (srcStart >= 2 && u16buf[0] == 0xFF);
+
+      int dstIdx = 0;
+      for (uint32_t i = srcStart; i + 1 < readLen && dstIdx < maxLen - 1; i += 2) {
+        uint8_t lo = littleEndian ? u16buf[i] : u16buf[i + 1];
+        uint8_t hi = littleEndian ? u16buf[i + 1] : u16buf[i];
+        if (lo == 0 && hi == 0) break;  // null terminator
+        if (hi == 0 && lo >= 0x20 && lo < 0x7F) {
+          dest[dstIdx++] = (char)lo;
+        } else {
+          dest[dstIdx++] = '?';
+        }
+      }
+      dest[dstIdx] = '\0';
+    }
+  }
+
+  // Extract APIC (cover art) frame.
+  // Format: encoding(1) + MIME(null-term) + picType(1) + desc(null-term) + imageData
+  void id3ExtractAPIC(File& file, uint32_t offset, uint32_t frameSize) {
+    file.seek(offset);
+    uint8_t encoding = file.read();
+
+    // Read MIME type (null-terminated ASCII)
+    char mime[32] = {0};
+    int mimeLen = 0;
+    while (mimeLen < 31) {
+      int b = file.read();
+      if (b < 0) return;   // Read error
+      if (b == 0) break;   // Null terminator = end of MIME string
+      mime[mimeLen++] = (char)b;
+    }
+    mime[mimeLen] = '\0';
+
+    // Picture type (1 byte)
+    uint8_t picType = file.read();
+    (void)picType;
+
+    // Skip description (null-terminated, encoding-dependent)
+    if (encoding == 0 || encoding == 3) {
+      // Single-byte null terminator
+      while (true) {
+        int b = file.read();
+        if (b < 0) return;   // Read error
+        if (b == 0) break;   // Null terminator
+      }
+    } else {
+      // UTF-16: double-null terminator
+      while (true) {
+        int b1 = file.read();
+        int b2 = file.read();
+        if (b1 < 0 || b2 < 0) return;  // Read error
+        if (b1 == 0 && b2 == 0) break;  // Double-null terminator
+      }
+    }
+
+    // Everything from here to end of frame is image data
+    uint32_t imgOffset = file.position();
+    uint32_t imgEnd = offset + frameSize;
+    if (imgOffset >= imgEnd) return;
+
+    uint32_t imgSize = imgEnd - imgOffset;
+
+    // Determine format from MIME type
+    bool isJpeg = (strstr(mime, "jpeg") || strstr(mime, "jpg"));
+    bool isPng  = (strstr(mime, "png") != nullptr);
+
+    // Also detect by magic bytes if MIME is generic
+    if (!isJpeg && !isPng && imgSize > 4) {
+      file.seek(imgOffset);
+      uint8_t magic[4];
+      file.read(magic, 4);
+      if (magic[0] == 0xFF && magic[1] == 0xD8) isJpeg = true;
+      else if (magic[0] == 0x89 && magic[1] == 'P' &&
+               magic[2] == 'N'  && magic[3] == 'G') isPng = true;
+    }
+
+    coverOffset = imgOffset;
+    coverSize = imgSize;
+    coverFormat = isJpeg ? 13 : (isPng ? 14 : 0);
+    hasCoverArt = (imgSize > 100 && (isJpeg || isPng));
+
+    if (hasCoverArt) {
+      Serial.printf("ID3: Cover %s, %u bytes\n",
+                    isJpeg ? "JPEG" : "PNG", imgSize);
+    }
+  }
+
+  // Parse Nero-style chapter list (chpl atom).
+  void parseChpl(File& file, uint32_t offset, uint32_t size) {
+    if (size < 9) return;
+
+    file.seek(offset);
+    uint8_t version = file.read();
+    file.read();  // flags byte 1
+    file.read();  // flags byte 2
+    file.read();  // flags byte 3
+
+    file.read();  // reserved
+
+    uint32_t count;
+    if (version == 1) {
+      count = readU32BE(file);
+    } else {
+      count = file.read();
+    }
+
+    if (count > M4B_MAX_CHAPTERS) count = M4B_MAX_CHAPTERS;
+
+    chapterCount = 0;
+    for (uint32_t i = 0; i < count; i++) {
+      if (!file.available()) break;
+
+      uint64_t timestamp = readU64BE(file);
+      uint32_t startMs = (uint32_t)(timestamp / 10000);  // 100ns -> ms
+
+      uint8_t nameLen = file.read();
+      if (nameLen == 0 || !file.available()) break;
+
+      M4BChapter& ch = chapters[chapterCount];
+      ch.startMs = startMs;
+
+      uint8_t readLen = (nameLen < sizeof(ch.name) - 1) ? nameLen : sizeof(ch.name) - 1;
+      file.read((uint8_t*)ch.name, readLen);
+      ch.name[readLen] = '\0';
+
+      if (nameLen > readLen) {
+        file.seek(file.position() + (nameLen - readLen));
+      }
+
+      chapterCount++;
+    }
+
+    Serial.printf("M4B: Found %d chapters\n", chapterCount);
+  }
+};

examples/companion_radio/ui-new/Repeateradminscreen.h

@@ -12,6 +12,7 @@ extern MyMesh the_mesh;
 #define ADMIN_PASSWORD_MAX    32
 #define ADMIN_RESPONSE_MAX    512   // CLI responses can be multi-line
 #define ADMIN_TIMEOUT_MS      15000 // 15s timeout for login/commands
+#define KEY_ADMIN_EXIT        0xFE  // Special key: Shift+Backspace exit (injected by main.cpp)
 
 class RepeaterAdminScreen : public UIScreen {
 public:
@@ -280,31 +281,34 @@ public:
 
     switch (_state) {
       case STATE_PASSWORD_ENTRY:
-        display.print("Q:Back");
+        display.print("Sh+Del:Exit");
         {
-          const char* right = "Enter:Login";
+          const char* right = "Ent:Login";
           display.setCursor(display.width() - display.getTextWidth(right) - 2, footerY);
           display.print(right);
         }
         break;
       case STATE_LOGGING_IN:
       case STATE_COMMAND_PENDING:
-        display.print("Q:Cancel");
+        display.print("Sh+Del:Cancel");
         break;
       case STATE_MENU:
-        display.print("Q:Back");
+        display.print("Sh+Del:Exit");
         {
           const char* mid = "W/S:Sel";
-          display.setCursor((display.width() - display.getTextWidth(mid)) / 2, footerY);
-          display.print(mid);
           const char* right = "Ent:Run";
-          display.setCursor(display.width() - display.getTextWidth(right) - 2, footerY);
+          int leftEnd = display.getTextWidth("Sh+Del:Exit") + 2;
+          int rightStart = display.width() - display.getTextWidth(right) - 2;
+          int midX = leftEnd + (rightStart - leftEnd - display.getTextWidth(mid)) / 2;
+          display.setCursor(midX, footerY);
+          display.print(mid);
+          display.setCursor(rightStart, footerY);
           display.print(right);
         }
         break;
       case STATE_RESPONSE_VIEW:
       case STATE_ERROR:
-        display.print("Q:Menu");
+        display.print("Sh+Del:Menu");
         if (_responseLen > bodyHeight / 9) {  // if scrollable
           const char* right = "W/S:Scrll";
           display.setCursor(display.width() - display.getTextWidth(right) - 2, footerY);
@@ -327,8 +331,8 @@ public:
         return handlePasswordInput(c);
       case STATE_LOGGING_IN:
       case STATE_COMMAND_PENDING:
-        // Q to cancel and go back
-        if (c == 'q' || c == 'Q') {
+        // Shift+Del to cancel and go back
+        if (c == KEY_ADMIN_EXIT) {
           _state = (_state == STATE_LOGGING_IN) ? STATE_PASSWORD_ENTRY : STATE_MENU;
           return true;
         }
@@ -370,9 +374,9 @@ private:
   }
 
   bool handlePasswordInput(char c) {
-    // Q without any password typed = go back (return false to signal "not handled")
-    if ((c == 'q' || c == 'Q') && _pwdLen == 0) {
-      return false;
+    // Shift+Del = exit (always, regardless of password content)
+    if (c == KEY_ADMIN_EXIT) {
+      return false;  // signal main.cpp to navigate back
     }
 
     // Enter to submit
@@ -472,8 +476,8 @@ private:
     if (c == '\r' || c == '\n' || c == KEY_ENTER) {
       return executeMenuCommand((MenuItem)_menuSel);
     }
-    // Q - back to contacts
-    if (c == 'q' || c == 'Q') {
+    // Shift+Del - back to contacts
+    if (c == KEY_ADMIN_EXIT) {
       return false;  // let UITask handle back navigation
     }
     // Number keys for quick selection
@@ -535,8 +539,8 @@ private:
       _responseScroll++;
       return true;
     }
-    // Q - back to menu (or back to password on error)
-    if (c == 'q' || c == 'Q') {
+    // Shift+Del - back to menu (or back to password on error)
+    if (c == KEY_ADMIN_EXIT) {
       if (_state == STATE_ERROR && _permissions == 0) {
         // Not yet logged in, go back to password
         _state = STATE_PASSWORD_ENTRY;

examples/companion_radio/ui-new/Settingsscreen.h

@@ -24,10 +24,22 @@ struct RadioPreset {
 };
 
 static const RadioPreset RADIO_PRESETS[] = {
-  { "MeshCore Default", 915.0f, 250.0f, 10, 5, 20 },
-  { "Long Range",       915.0f, 125.0f, 12, 8, 20 },
-  { "Fast/Short",       915.0f, 500.0f,  7, 5, 20 },
-  { "EU Default",       869.4f, 250.0f, 10, 5, 14 },
+  { "Australia",              915.800f, 250.0f,  10, 5, 22 },
+  { "Australia (Narrow)",     916.575f,  62.5f,   7, 8, 22 },
+  { "Australia: SA, WA",      923.125f,  62.5f,   8, 8, 22 },
+  { "Australia: QLD",         923.125f,  62.5f,   8, 5, 22 },
+  { "EU/UK (Narrow)",         869.618f,  62.5f,   8, 8, 14 },
+  { "EU/UK (Long Range)",     869.525f, 250.0f,  11, 5, 14 },
+  { "EU/UK (Medium Range)",   869.525f, 250.0f,  10, 5, 14 },
+  { "Czech Republic (Narrow)",869.432f,  62.5f,   7, 5, 14 },
+  { "EU 433 (Long Range)",    433.650f, 250.0f,  11, 5, 14 },
+  { "New Zealand",            917.375f, 250.0f,  11, 5, 22 },
+  { "New Zealand (Narrow)",   917.375f,  62.5f,   7, 5, 22 },
+  { "Portugal 433",           433.375f,  62.5f,   9, 6, 14 },
+  { "Portugal 868",           869.618f,  62.5f,   7, 6, 14 },
+  { "Switzerland",            869.618f,  62.5f,   8, 8, 14 },
+  { "USA/Canada (Recommended)",910.525f, 62.5f,   7, 5, 22 },
+  { "Vietnam",                920.250f, 250.0f,  11, 5, 22 },
 };
 #define NUM_RADIO_PRESETS (sizeof(RADIO_PRESETS) / sizeof(RADIO_PRESETS[0]))
 
@@ -43,6 +55,7 @@ enum SettingsRowType : uint8_t {
   ROW_CR,             // Coding rate (5-8)
   ROW_TX_POWER,       // TX power (1-20 dBm)
   ROW_UTC_OFFSET,     // UTC offset (-12 to +14)
+  ROW_MSG_NOTIFY,     // Keyboard flash on new msg toggle
   ROW_CH_HEADER,      // "--- Channels ---" separator
   ROW_CHANNEL,        // A channel entry (dynamic, index stored separately)
   ROW_ADD_CHANNEL,    // "+ Add Hashtag Channel"
@@ -72,7 +85,7 @@ private:
   mesh::RTCClock* _rtc;
   NodePrefs* _prefs;
 
-  // Row table — rebuilt whenever channels change
+  // Row table — rebuilt whenever channels change
   struct Row {
     SettingsRowType type;
     uint8_t param;       // channel index for ROW_CHANNEL, preset index for ROW_RADIO_PRESET
@@ -96,7 +109,7 @@ private:
   // Onboarding mode
   bool _onboarding;
 
-  // Dirty flag for radio params — prompt to apply
+  // Dirty flag for radio params — prompt to apply
   bool _radioChanged;
 
   // ---------------------------------------------------------------------------
@@ -114,6 +127,7 @@ private:
     addRow(ROW_CR);
     addRow(ROW_TX_POWER);
     addRow(ROW_UTC_OFFSET);
+    addRow(ROW_MSG_NOTIFY);
     addRow(ROW_CH_HEADER);
 
     // Enumerate current channels
@@ -198,11 +212,11 @@ private:
     strncpy(newCh.name, chanName, sizeof(newCh.name));
     newCh.name[31] = '\0';
 
-    // SHA-256 the channel name → first 16 bytes become the secret
+    // SHA-256 the channel name → first 16 bytes become the secret
     uint8_t hash[32];
     mesh::Utils::sha256(hash, 32, (const uint8_t*)chanName, strlen(chanName));
     memcpy(newCh.channel.secret, hash, 16);
-    // Upper 16 bytes left as zero → setChannel uses 128-bit mode
+    // Upper 16 bytes left as zero → setChannel uses 128-bit mode
 
     // Find next empty slot
     for (uint8_t i = 0; i < MAX_GROUP_CHANNELS; i++) {
@@ -400,8 +414,8 @@ public:
         }
 
         case ROW_FREQ:
-          if (editing && _editMode == EDIT_NUMBER) {
-            snprintf(tmp, sizeof(tmp), "Freq: %.3f <W/S>", _editFloat);
+          if (editing && _editMode == EDIT_TEXT) {
+            snprintf(tmp, sizeof(tmp), "Freq: %s_ MHz", _editBuf);
           } else {
             snprintf(tmp, sizeof(tmp), "Freq: %.3f MHz", _prefs->freq);
           }
@@ -453,6 +467,12 @@ public:
           display.print(tmp);
           break;
 
+        case ROW_MSG_NOTIFY:
+          snprintf(tmp, sizeof(tmp), "Msg Rcvd LED Light Pulse: %s",
+                   _prefs->kb_flash_notify ? "ON" : "OFF");
+          display.print(tmp);
+          break;
+
         case ROW_CH_HEADER:
           display.setColor(DisplayDriver::YELLOW);
           display.print("--- Channels ---");
@@ -611,6 +631,15 @@ public:
             _cursor = 1;  // ROW_RADIO_PRESET
             startEditPicker(max(0, detectCurrentPreset()));
           }
+        } else if (type == ROW_FREQ) {
+          if (_editPos > 0) {
+            float f = strtof(_editBuf, nullptr);
+            f = constrain(f, 400.0f, 2500.0f);
+            _prefs->freq = f;
+            _radioChanged = true;
+            Serial.printf("Settings: Freq typed to %.3f\n", f);
+          }
+          _editMode = EDIT_NONE;
         } else if (type == ROW_ADD_CHANNEL) {
           if (_editPos > 0) {
             createHashtagChannel(_editBuf);
@@ -684,7 +713,6 @@ public:
 
       if (c == 'w' || c == 'W') {
         switch (type) {
-          case ROW_FREQ:    _editFloat += 0.1f; break;
           case ROW_BW:
             // Cycle through common bandwidths
             if (_editFloat < 31.25f) _editFloat = 31.25f;
@@ -703,7 +731,6 @@ public:
       }
       if (c == 's' || c == 'S') {
         switch (type) {
-          case ROW_FREQ:    _editFloat -= 0.1f; break;
           case ROW_BW:
             if (_editFloat > 250.0f) _editFloat = 250.0f;
             else if (_editFloat > 125.0f) _editFloat = 125.0f;
@@ -721,10 +748,6 @@ public:
       if (c == '\r' || c == 13) {
         // Confirm number edit
         switch (type) {
-          case ROW_FREQ:
-            _prefs->freq = constrain(_editFloat, 400.0f, 2500.0f);
-            _radioChanged = true;
-            break;
           case ROW_BW:
             _prefs->bw = _editFloat;
             _radioChanged = true;
@@ -787,9 +810,13 @@ public:
         case ROW_RADIO_PRESET:
           startEditPicker(max(0, detectCurrentPreset()));
           break;
-        case ROW_FREQ:
-          startEditFloat(_prefs->freq);
+        case ROW_FREQ: {
+          // Use text input so user can type exact frequencies like 916.575
+          char freqStr[16];
+          snprintf(freqStr, sizeof(freqStr), "%.3f", _prefs->freq);
+          startEditText(freqStr);
           break;
+        }
         case ROW_BW:
           startEditFloat(_prefs->bw);
           break;
@@ -805,6 +832,12 @@ public:
         case ROW_UTC_OFFSET:
           startEditInt(_prefs->utc_offset_hours);
           break;
+        case ROW_MSG_NOTIFY:
+          _prefs->kb_flash_notify = _prefs->kb_flash_notify ? 0 : 1;
+          the_mesh.savePrefs();
+          Serial.printf("Settings: Msg flash notify = %s\n",
+                        _prefs->kb_flash_notify ? "ON" : "OFF");
+          break;
         case ROW_ADD_CHANNEL:
           startEditText("");
           break;
@@ -828,7 +861,7 @@ public:
       }
     }
 
-    // Q: back — if radio changed, prompt to apply first
+    // Q: back — if radio changed, prompt to apply first
     if (c == 'q' || c == 'Q') {
       if (_radioChanged) {
         _editMode = EDIT_CONFIRM;

examples/companion_radio/ui-new/Textreaderscreen.h

@@ -4,6 +4,7 @@
 #include <helpers/ui/DisplayDriver.h>
 #include <SD.h>
 #include <vector>
+#include "Utf8CP437.h"
 #include "EpubProcessor.h"
 
 // Forward declarations
@@ -14,7 +15,7 @@ class UITask;
 // ============================================================================
 #define BOOKS_FOLDER      "/books"
 #define INDEX_FOLDER      "/.indexes"
-#define INDEX_VERSION     4
+#define INDEX_VERSION     5  // v5: UTF-8 aware word wrap (accented char support)
 #define PREINDEX_PAGES    100
 #define READER_MAX_FILES  50
 #define READER_BUF_SIZE   4096
@@ -57,6 +58,10 @@ inline WrapResult findLineBreak(const char* buffer, int bufLen, int lineStart, i
     }
 
     if (c >= 32) {
+      // Skip UTF-8 continuation bytes (0x80-0xBF) - the lead byte already
+      // counted as one display character, so don't double-count these.
+      if ((uint8_t)c >= 0x80 && (uint8_t)c < 0xC0) continue;
+
       charCount++;
       if (c == ' ' || c == '\t') {
         if (inWord) {
@@ -177,8 +182,10 @@ private:
 
   // File list state
   std::vector<String> _fileList;
+  std::vector<String> _dirList;    // Subdirectories at current path
   std::vector<FileCache> _fileCache;
   int _selectedFile;
+  String _currentPath;             // Current browsed directory
 
   // Reading state
   File _file;
@@ -386,8 +393,8 @@ private:
     idxFile.read(&fullyFlag, 1);
     idxFile.read((uint8_t*)&lastRead, 4);
 
-    // Verify file hasn't changed - try BOOKS_FOLDER first, then epub cache
-    String fullPath = String(BOOKS_FOLDER) + "/" + filename;
+    // Verify file hasn't changed - try current path first, then epub cache
+    String fullPath = _currentPath + "/" + filename;
     File txtFile = SD.open(fullPath.c_str(), FILE_READ);
     if (!txtFile) {
       // Fallback: check epub cache directory
@@ -477,33 +484,94 @@ private:
 
   // ---- File Scanning ----
 
+  // ---- Folder Navigation Helpers ----
+
+  bool isAtBooksRoot() const {
+    return _currentPath == String(BOOKS_FOLDER);
+  }
+
+  // Number of non-file entries at the start of the visual list
+  int dirEntryCount() const {
+    int count = _dirList.size();
+    if (!isAtBooksRoot()) count++;  // ".." entry
+    return count;
+  }
+
+  // Total items in the visual list (parent + dirs + files)
+  int totalListItems() const {
+    return dirEntryCount() + (int)_fileList.size();
+  }
+
+  // What type of entry is at visual list index idx?
+  // Returns: 0 = ".." parent, 1 = directory, 2 = file
+  int itemTypeAt(int idx) const {
+    bool hasParent = !isAtBooksRoot();
+    if (hasParent && idx == 0) return 0;  // ".."
+    int dirStart = hasParent ? 1 : 0;
+    if (idx < dirStart + (int)_dirList.size()) return 1;  // directory
+    return 2;  // file
+  }
+
+  // Get directory name for visual index (only valid when itemTypeAt == 1)
+  const String& dirNameAt(int idx) const {
+    int dirStart = isAtBooksRoot() ? 0 : 1;
+    return _dirList[idx - dirStart];
+  }
+
+  // Get file list index for visual index (only valid when itemTypeAt == 2)
+  int fileIndexAt(int idx) const {
+    return idx - dirEntryCount();
+  }
+
+  void navigateToParent() {
+    int lastSlash = _currentPath.lastIndexOf('/');
+    if (lastSlash > 0) {
+      _currentPath = _currentPath.substring(0, lastSlash);
+    } else {
+      _currentPath = BOOKS_FOLDER;
+    }
+  }
+
+  void navigateToChild(const String& dirName) {
+    _currentPath = _currentPath + "/" + dirName;
+  }
+
+  // ---- File Scanning ----
+
   void scanFiles() {
     _fileList.clear();
+    _dirList.clear();
     if (!SD.exists(BOOKS_FOLDER)) {
       SD.mkdir(BOOKS_FOLDER);
       Serial.printf("TextReader: Created %s\n", BOOKS_FOLDER);
     }
 
-    File root = SD.open(BOOKS_FOLDER);
+    File root = SD.open(_currentPath.c_str());
     if (!root || !root.isDirectory()) return;
 
     File f = root.openNextFile();
-    while (f && _fileList.size() < READER_MAX_FILES) {
-      if (!f.isDirectory()) {
-        String name = String(f.name());
-        int slash = name.lastIndexOf('/');
-        if (slash >= 0) name = name.substring(slash + 1);
+    while (f && (_fileList.size() + _dirList.size()) < READER_MAX_FILES) {
+      String name = String(f.name());
+      int slash = name.lastIndexOf('/');
+      if (slash >= 0) name = name.substring(slash + 1);
 
-        if (!name.startsWith(".") &&
-            (name.endsWith(".txt") || name.endsWith(".TXT") ||
-             name.endsWith(".epub") || name.endsWith(".EPUB"))) {
-          _fileList.push_back(name);
-        }
+      // Skip hidden files/dirs
+      if (name.startsWith(".")) {
+        f = root.openNextFile();
+        continue;
+      }
+
+      if (f.isDirectory()) {
+        _dirList.push_back(name);
+      } else if (name.endsWith(".txt") || name.endsWith(".TXT") ||
+                 name.endsWith(".epub") || name.endsWith(".EPUB")) {
+        _fileList.push_back(name);
       }
       f = root.openNextFile();
     }
     root.close();
-    Serial.printf("TextReader: Found %d files\n", _fileList.size());
+    Serial.printf("TextReader: %s — %d dirs, %d files\n",
+                  _currentPath.c_str(), (int)_dirList.size(), (int)_fileList.size());
   }
 
   // ---- Book Open/Close ----
@@ -513,7 +581,7 @@ private:
 
     // ---- EPUB auto-conversion ----
     String actualFilename = filename;
-    String actualFullPath = String(BOOKS_FOLDER) + "/" + filename;
+    String actualFullPath = _currentPath + "/" + filename;
     bool isEpub = filename.endsWith(".epub") || filename.endsWith(".EPUB");
 
     if (isEpub) {
@@ -603,7 +671,7 @@ private:
         _currentPage = cache->lastReadPage;
       }
 
-      // Already fully indexed — open immediately
+      // Already fully indexed — open immediately
       if (cache->fullyIndexed) {
         _totalPages = _pagePositions.size();
         _mode = READING;
@@ -613,7 +681,7 @@ private:
         return;
       }
 
-      // Partially indexed — finish indexing with splash
+      // Partially indexed — finish indexing with splash
       Serial.printf("TextReader: Finishing index for %s (have %d pages so far)\n",
                     actualFilename.c_str(), (int)_pagePositions.size());
 
@@ -629,7 +697,7 @@ private:
       drawSplash("Indexing...", "Please wait", shortName);
 
       if (_pagePositions.empty()) {
-        // Cache had no pages (e.g. dummy entry) — full index from scratch
+        // Cache had no pages (e.g. dummy entry) — full index from scratch
         _pagePositions.push_back(0);
         indexPagesWordWrap(_file, 0, _pagePositions,
                            _linesPerPage, _charsPerLine, 0);
@@ -639,7 +707,7 @@ private:
                            _linesPerPage, _charsPerLine, 0);
       }
     } else {
-      // No cache — full index from scratch
+      // No cache — full index from scratch
       Serial.printf("TextReader: Full index for %s\n", actualFilename.c_str());
 
       char shortName[28];
@@ -750,15 +818,26 @@ private:
     display.setCursor(0, 0);
     display.setTextSize(1);
     display.setColor(DisplayDriver::GREEN);
-    display.print("Text Reader");
+    if (isAtBooksRoot()) {
+      display.print("Text Reader");
+    } else {
+      // Show current subfolder name
+      int lastSlash = _currentPath.lastIndexOf('/');
+      String folderName = (lastSlash >= 0) ? _currentPath.substring(lastSlash + 1) : _currentPath;
+      char hdrBuf[20];
+      strncpy(hdrBuf, folderName.c_str(), 17);
+      hdrBuf[17] = '\0';
+      display.print(hdrBuf);
+    }
 
-    sprintf(tmp, "[%d]", (int)_fileList.size());
+    int totalItems = totalListItems();
+    sprintf(tmp, "[%d]", totalItems);
     display.setCursor(display.width() - display.getTextWidth(tmp) - 2, 0);
     display.print(tmp);
 
     display.drawRect(0, 11, display.width(), 1);
 
-    if (_fileList.size() == 0) {
+    if (totalItems == 0) {
       display.setCursor(0, 18);
       display.setColor(DisplayDriver::LIGHT);
       display.print("No files found");
@@ -775,8 +854,8 @@ private:
       if (maxVisible > 15) maxVisible = 15;
 
       int startIdx = max(0, min(_selectedFile - maxVisible / 2,
-                                (int)_fileList.size() - maxVisible));
-      int endIdx = min((int)_fileList.size(), startIdx + maxVisible);
+                                totalItems - maxVisible));
+      int endIdx = min(totalItems, startIdx + maxVisible);
 
       int y = startY;
       for (int i = startIdx; i < endIdx; i++) {
@@ -795,27 +874,41 @@ private:
         // Set cursor AFTER fillRect so text draws on top of highlight
         display.setCursor(0, y);
 
-        // Build display string: "> filename.txt *" (asterisk if has bookmark)
+        int type = itemTypeAt(i);
         String line = selected ? "> " : "  ";
-        String name = _fileList[i];
 
-        // Check for resume indicator
-        String suffix = "";
-        for (int j = 0; j < (int)_fileCache.size(); j++) {
-          if (_fileCache[j].filename == name && _fileCache[j].lastReadPage > 0) {
-            suffix = " *";
-            break;
+        if (type == 0) {
+          // ".." parent directory
+          line += ".. (up)";
+        } else if (type == 1) {
+          // Subdirectory
+          line += "/" + dirNameAt(i);
+          // Truncate if needed
+          if ((int)line.length() > _charsPerLine) {
+            line = line.substring(0, _charsPerLine - 3) + "...";
           }
+        } else {
+          // File
+          int fi = fileIndexAt(i);
+          String name = _fileList[fi];
+
+          // Check for resume indicator
+          String suffix = "";
+          if (fi < (int)_fileCache.size()) {
+            if (_fileCache[fi].filename == name && _fileCache[fi].lastReadPage > 0) {
+              suffix = " *";
+            }
+          }
+
+          // Truncate if needed
+          int maxLen = _charsPerLine - 4 - suffix.length();
+          if ((int)name.length() > maxLen) {
+            name = name.substring(0, maxLen - 3) + "...";
+          }
+          line += name + suffix;
         }
 
-        // Truncate if needed
-        int maxLen = _charsPerLine - 4 - suffix.length();
-        if ((int)name.length() > maxLen) {
-          name = name.substring(0, maxLen - 3) + "...";
-        }
-        line += name + suffix;
         display.print(line.c_str());
-
         y += listLineH;
       }
       display.setTextSize(1);  // Restore
@@ -855,12 +948,40 @@ private:
       if (wrap.nextStart <= oldPos && wrap.lineEnd >= _pageBufLen) break;
 
       display.setCursor(0, y);
-      // Print line character by character (only printable)
+      // Print line with UTF-8 decoding: multi-byte sequences are decoded
+      // to Unicode codepoints, then mapped to CP437 for the built-in font.
       char charStr[2] = {0, 0};
-      for (int j = pos; j < wrap.lineEnd && j < _pageBufLen; j++) {
-        if (_pageBuf[j] >= 32) {
-          charStr[0] = _pageBuf[j];
+      int j = pos;
+      while (j < wrap.lineEnd && j < _pageBufLen) {
+        uint8_t b = (uint8_t)_pageBuf[j];
+
+        if (b < 32) {
+          // Control character — skip
+          j++;
+          continue;
+        }
+
+        if (b < 0x80) {
+          // Plain ASCII — print directly
+          charStr[0] = (char)b;
           display.print(charStr);
+          j++;
+        } else if (b >= 0xC0) {
+          // UTF-8 lead byte — decode full sequence and map to CP437
+          int savedJ = j;
+          uint32_t cp = decodeUtf8Char(_pageBuf, wrap.lineEnd, &j);
+          uint8_t glyph = unicodeToCP437(cp);
+          if (glyph) {
+            charStr[0] = (char)glyph;
+            display.print(charStr);
+          }
+          // If unmappable (glyph==0), just skip the character
+        } else {
+          // Standalone byte 0x80-0xBF: not a valid UTF-8 lead byte.
+          // Treat as CP437 pass-through (e.g. from EPUB numeric entity decoding).
+          charStr[0] = (char)b;
+          display.print(charStr);
+          j++;
         }
       }
 
@@ -895,7 +1016,8 @@ public:
       _bootIndexed(false), _display(nullptr),
       _charsPerLine(38), _linesPerPage(22), _lineHeight(5),
       _headerHeight(14), _footerHeight(14),
-      _selectedFile(0), _fileOpen(false), _currentPage(0), _totalPages(0),
+      _selectedFile(0), _currentPath(BOOKS_FOLDER),
+      _fileOpen(false), _currentPage(0), _totalPages(0),
       _pageBufLen(0), _contentDirty(true) {
   }
 
@@ -997,7 +1119,7 @@ public:
 
     // --- Pass 1: Fast cache load (no per-file splash screens) ---
     // Try to load existing .idx files from SD for every file.
-    // This is just SD reads — no indexing, no e-ink refreshes.
+    // This is just SD reads — no indexing, no e-ink refreshes.
     _fileCache.clear();
     _fileCache.resize(_fileList.size());  // Pre-allocate slots to maintain alignment with _fileList
 
@@ -1026,7 +1148,7 @@ public:
         // Skip files that loaded from cache
         if (_fileCache[i].filename.length() > 0) continue;
 
-        // Skip .epub files — they'll be converted on first open via openBook()
+        // Skip .epub files — they'll be converted on first open via openBook()
         if (_fileList[i].endsWith(".epub") || _fileList[i].endsWith(".EPUB")) {
           needsIndexCount--;  // Don't count epubs in progress display
           continue;
@@ -1035,8 +1157,8 @@ public:
         indexProgress++;
         drawBootSplash(indexProgress, needsIndexCount, _fileList[i]);
 
-        // Try BOOKS_FOLDER first, then epub cache fallback
-        String fullPath = String(BOOKS_FOLDER) + "/" + _fileList[i];
+        // Try current path first, then epub cache fallback
+        String fullPath = _currentPath + "/" + _fileList[i];
         File file = SD.open(fullPath.c_str(), FILE_READ);
         if (!file) {
           String cacheFallback = String("/books/.epub_cache/") + _fileList[i];
@@ -1133,6 +1255,8 @@ public:
   }
 
   bool handleFileListInput(char c) {
+    int total = totalListItems();
+
     // W - scroll up
     if (c == 'w' || c == 'W' || c == 0xF2) {
       if (_selectedFile > 0) {
@@ -1144,18 +1268,36 @@ public:
 
     // S - scroll down
     if (c == 's' || c == 'S' || c == 0xF1) {
-      if (_selectedFile < (int)_fileList.size() - 1) {
+      if (_selectedFile < total - 1) {
         _selectedFile++;
         return true;
       }
       return false;
     }
 
-    // Enter - open selected file
+    // Enter - open selected item (directory or file)
     if (c == '\r' || c == 13) {
-      if (_fileList.size() > 0 && _selectedFile < (int)_fileList.size()) {
-        openBook(_fileList[_selectedFile]);
+      if (total == 0 || _selectedFile >= total) return false;
+
+      int type = itemTypeAt(_selectedFile);
+
+      if (type == 0) {
+        // ".." — navigate to parent
+        navigateToParent();
+        rescanAndIndex();
         return true;
+      } else if (type == 1) {
+        // Subdirectory — navigate into it
+        navigateToChild(dirNameAt(_selectedFile));
+        rescanAndIndex();
+        return true;
+      } else {
+        // File — open it
+        int fi = fileIndexAt(_selectedFile);
+        if (fi >= 0 && fi < (int)_fileList.size()) {
+          openBook(_fileList[fi]);
+          return true;
+        }
       }
       return false;
     }
@@ -1163,6 +1305,53 @@ public:
     return false;
   }
 
+  // Rescan current directory and re-index its files.
+  // Called when navigating into or out of a subfolder.
+  void rescanAndIndex() {
+    scanFiles();
+    _selectedFile = 0;
+
+    // Rebuild file cache for the new directory's files
+    _fileCache.clear();
+    _fileCache.resize(_fileList.size());
+
+    for (int i = 0; i < (int)_fileList.size(); i++) {
+      if (!loadIndex(_fileList[i], _fileCache[i])) {
+        // Not cached — skip EPUB auto-indexing here (it happens on open)
+        // For .txt files, index now
+        if (!(_fileList[i].endsWith(".epub") || _fileList[i].endsWith(".EPUB"))) {
+          String fullPath = _currentPath + "/" + _fileList[i];
+          File file = SD.open(fullPath.c_str(), FILE_READ);
+          if (!file) {
+            // Try epub cache fallback
+            String cacheFallback = String("/books/.epub_cache/") + _fileList[i];
+            file = SD.open(cacheFallback.c_str(), FILE_READ);
+          }
+          if (file) {
+            FileCache& cache = _fileCache[i];
+            cache.filename = _fileList[i];
+            cache.fileSize = file.size();
+            cache.fullyIndexed = false;
+            cache.lastReadPage = 0;
+            cache.pagePositions.clear();
+            cache.pagePositions.push_back(0);
+            indexPagesWordWrap(file, 0, cache.pagePositions,
+                               _linesPerPage, _charsPerLine,
+                               PREINDEX_PAGES - 1);
+            cache.fullyIndexed = !file.available();
+            file.close();
+            saveIndex(cache.filename, cache.pagePositions, cache.fileSize,
+                      cache.fullyIndexed, 0);
+          }
+        } else {
+          _fileCache[i].filename = "";
+        }
+      }
+      yield();  // Feed WDT between files
+    }
+    digitalWrite(SDCARD_CS, HIGH);
+  }
+
   bool handleReadingInput(char c) {
     // W/A - previous page
     if (c == 'w' || c == 'W' || c == 'a' || c == 'A' || c == 0xF2) {

examples/companion_radio/ui-new/UITask.cpp

@@ -1,7 +1,10 @@
 #include "UITask.h"
 #include <helpers/TxtDataHelpers.h>
 #include "../MyMesh.h"
+#include "NotesScreen.h"
+#include "RepeaterAdminScreen.h"
 #include "target.h"
+#include "GPSDutyCycle.h"
 #ifdef WIFI_SSID
   #include <WiFi.h>
 #endif
@@ -34,11 +37,14 @@
 #include "ContactsScreen.h"
 #include "TextReaderScreen.h"
 #include "SettingsScreen.h"
+#ifdef MECK_AUDIO_VARIANT
+#include "AudiobookPlayerScreen.h"
+#endif
 
 class SplashScreen : public UIScreen {
   UITask* _task;
   unsigned long dismiss_after;
-  char _version_info[12];
+  char _version_info[24];
 
 public:
   SplashScreen(UITask* task) : _task(task) {
@@ -85,13 +91,18 @@ class HomeScreen : public UIScreen {
     FIRST,
     RECENT,
     RADIO,
+#ifdef BLE_PIN_CODE
     BLUETOOTH,
+#endif
     ADVERT,
 #if ENV_INCLUDE_GPS == 1
     GPS,
 #endif
 #if UI_SENSORS_PAGE == 1
     SENSORS,
+#endif
+#if HAS_BQ27220
+    BATTERY,
 #endif
     SHUTDOWN,
     Count    // keep as last
@@ -108,7 +119,7 @@ class HomeScreen : public UIScreen {
   AdvertPath recent[UI_RECENT_LIST_SIZE];
 
 
-void renderBatteryIndicator(DisplayDriver& display, uint16_t batteryMilliVolts) {
+void renderBatteryIndicator(DisplayDriver& display, uint16_t batteryMilliVolts, int* outIconX = nullptr) {
     // Use voltage-based estimation to match BLE app readings
     uint8_t batteryPercentage = 0;
     if (batteryMilliVolts > 0) {
@@ -137,6 +148,8 @@ void renderBatteryIndicator(DisplayDriver& display, uint16_t batteryMilliVolts)
     int iconX = display.width() - totalWidth;
     int iconY = 0;  // vertically align with node name text
 
+    if (outIconX) *outIconX = iconX;
+
     // battery outline
     display.drawRect(iconX, iconY, iconWidth, iconHeight);
 
@@ -156,6 +169,24 @@ void renderBatteryIndicator(DisplayDriver& display, uint16_t batteryMilliVolts)
     display.setTextSize(1);  // restore default text size
   }
 
+#ifdef MECK_AUDIO_VARIANT
+  // ---- Audio background playback indicator ----
+  // Shows a small play symbol to the left of the battery icon when an
+  // audiobook is actively playing in the background.
+  // Uses the font renderer (not manual pixel drawing) since it handles
+  // the e-ink coordinate scaling correctly.
+  void renderAudioIndicator(DisplayDriver& display, int batteryLeftX) {
+    if (!_task->isAudioPlayingInBackground()) return;
+
+    display.setColor(DisplayDriver::GREEN);
+    display.setTextSize(0); // tiny font (same as clock & battery %)
+    int x = batteryLeftX - display.getTextWidth(">>") - 2;
+    display.setCursor(x, -3); // align vertically with battery text
+    display.print(">>");
+    display.setTextSize(1); // restore
+  }
+#endif
+
   CayenneLPP sensors_lpp;
   int sensors_nb = 0;
   bool sensors_scroll = false;
@@ -204,16 +235,24 @@ public:
 
   int render(DisplayDriver& display) override {
     char tmp[80];
-    // node name
-    display.setTextSize(1);
+    // node name (tinyfont to avoid overlapping clock)
+    display.setTextSize(0);
     display.setColor(DisplayDriver::GREEN);
     char filtered_name[sizeof(_node_prefs->node_name)];
     display.translateUTF8ToBlocks(filtered_name, _node_prefs->node_name, sizeof(filtered_name));
-    display.setCursor(0, 0);
+    display.setCursor(0, -3);
     display.print(filtered_name);
 
     // battery voltage
+#ifdef MECK_AUDIO_VARIANT
+    int battLeftX = display.width(); // default if battery doesn't render
+    renderBatteryIndicator(display, _task->getBattMilliVolts(), &battLeftX);
+
+    // audio background playback indicator (>> icon next to battery)
+    renderAudioIndicator(display, battLeftX);
+#else
     renderBatteryIndicator(display, _task->getBattMilliVolts());
+#endif
 
     // centered clock (tinyfont) - only show when time is valid
     {
@@ -250,28 +289,58 @@ public:
     }
 
     if (_page == HomePage::FIRST) {
+      int y = 20;
       display.setColor(DisplayDriver::YELLOW);
       display.setTextSize(2);
       sprintf(tmp, "MSG: %d", _task->getMsgCount());
-      display.drawTextCentered(display.width() / 2, 20, tmp);
+      display.drawTextCentered(display.width() / 2, y, tmp);
+      y += 18;
 
       #ifdef WIFI_SSID
         IPAddress ip = WiFi.localIP();
         snprintf(tmp, sizeof(tmp), "IP: %d.%d.%d.%d", ip[0], ip[1], ip[2], ip[3]);
         display.setTextSize(1);
-        display.drawTextCentered(display.width() / 2, 54, tmp); 
+        display.drawTextCentered(display.width() / 2, y, tmp);
+        y += 12;
       #endif
+      #if defined(BLE_PIN_CODE) || defined(WIFI_SSID)
       if (_task->hasConnection()) {
         display.setColor(DisplayDriver::GREEN);
         display.setTextSize(1);
-        display.drawTextCentered(display.width() / 2, 43, "< Connected >");
-
-      } else if (the_mesh.getBLEPin() != 0) { // BT pin
+        display.drawTextCentered(display.width() / 2, y, "< Connected >");
+        y += 12;
+#ifdef BLE_PIN_CODE
+      } else if (_task->isSerialEnabled() && the_mesh.getBLEPin() != 0) {
         display.setColor(DisplayDriver::RED);
         display.setTextSize(2);
         sprintf(tmp, "Pin:%d", the_mesh.getBLEPin());
-        display.drawTextCentered(display.width() / 2, 43, tmp);
+        display.drawTextCentered(display.width() / 2, y, tmp);
+        y += 18;
+#endif
       }
+      #endif
+
+      // Menu shortcuts - tinyfont monospaced grid
+      y += 6;
+      display.setColor(DisplayDriver::LIGHT);
+      display.setTextSize(0);  // tinyfont 6x8 monospaced
+      display.drawTextCentered(display.width() / 2, y, "Press:");
+      y += 12;
+      display.drawTextCentered(display.width() / 2, y, "[M] Messages    [C] Contacts  ");
+      y += 10;
+      display.drawTextCentered(display.width() / 2, y, "[N] Notes       [S] Settings  ");
+      y += 10;
+#ifdef MECK_AUDIO_VARIANT
+      display.drawTextCentered(display.width() / 2, y, "[E] Reader      [P] Audiobooks");
+#else
+      display.drawTextCentered(display.width() / 2, y, "[E] Reader                    ");
+#endif
+      y += 14;
+
+      // Nav hint
+      display.setColor(DisplayDriver::GREEN);
+      display.drawTextCentered(display.width() / 2, y, "Press A/D to cycle home views");
+      display.setTextSize(1);  // restore
     } else if (_page == HomePage::RECENT) {
       the_mesh.getRecentlyHeard(recent, UI_RECENT_LIST_SIZE);
       display.setColor(DisplayDriver::GREEN);
@@ -316,6 +385,7 @@ public:
       display.setCursor(0, 53);
       sprintf(tmp, "Noise floor: %d", radio_driver.getNoiseFloor());
       display.print(tmp);
+#ifdef BLE_PIN_CODE
     } else if (_page == HomePage::BLUETOOTH) {
       display.setColor(DisplayDriver::GREEN);
       display.drawXbm((display.width() - 32) / 2, 18,
@@ -323,27 +393,44 @@ public:
           32, 32);
       display.setTextSize(1);
       display.drawTextCentered(display.width() / 2, 64 - 11, "toggle: " PRESS_LABEL);
+#endif
     } else if (_page == HomePage::ADVERT) {
       display.setColor(DisplayDriver::GREEN);
       display.drawXbm((display.width() - 32) / 2, 18, advert_icon, 32, 32);
       display.drawTextCentered(display.width() / 2, 64 - 11, "advert: " PRESS_LABEL);
 #if ENV_INCLUDE_GPS == 1
     } else if (_page == HomePage::GPS) {
+      extern GPSDutyCycle gpsDuty;
+      extern GPSStreamCounter gpsStream;
       LocationProvider* nmea = sensors.getLocationProvider();
       char buf[50];
       int y = 18;
-      bool gps_state = _task->getGPSState();
-#ifdef PIN_GPS_SWITCH
-      bool hw_gps_state = digitalRead(PIN_GPS_SWITCH);
-      if (gps_state != hw_gps_state) {
-        strcpy(buf, gps_state ? "gps off(hw)" : "gps off(sw)");
+
+      // GPS state line with duty cycle info
+      if (!_node_prefs->gps_enabled) {
+        strcpy(buf, "gps off");
       } else {
-        strcpy(buf, gps_state ? "gps on" : "gps off");
+        switch (gpsDuty.getState()) {
+          case GPSDutyState::ACQUIRING: {
+            uint32_t elapsed = gpsDuty.acquireElapsedSecs();
+            sprintf(buf, "acquiring %us", (unsigned)elapsed);
+            break;
+          }
+          case GPSDutyState::SLEEPING: {
+            uint32_t remain = gpsDuty.sleepRemainingSecs();
+            if (remain >= 60) {
+              sprintf(buf, "sleep %um%02us", (unsigned)(remain / 60), (unsigned)(remain % 60));
+            } else {
+              sprintf(buf, "sleep %us", (unsigned)remain);
+            }
+            break;
+          }
+          default:
+            strcpy(buf, "gps off");
+        }
       }
-#else
-      strcpy(buf, gps_state ? "gps on" : "gps off");
-#endif
       display.drawTextLeftAlign(0, y, buf);
+
       if (nmea == NULL) {
         y = y + 12;
         display.drawTextLeftAlign(0, y, "Can't access GPS");
@@ -355,6 +442,19 @@ public:
         sprintf(buf, "%d", nmea->satellitesCount());
         display.drawTextRightAlign(display.width()-1, y, buf);
         y = y + 12;
+
+        // NMEA sentence counter — confirms baud rate and data flow
+        display.drawTextLeftAlign(0, y, "sentences");
+        if (gpsDuty.isHardwareOn()) {
+          uint16_t sps = gpsStream.getSentencesPerSec();
+          uint32_t total = gpsStream.getSentenceCount();
+          sprintf(buf, "%u/s (%lu)", sps, (unsigned long)total);
+        } else {
+          strcpy(buf, "hw off");
+        }
+        display.drawTextRightAlign(display.width()-1, y, buf);
+        y = y + 12;
+
         display.drawTextLeftAlign(0, y, "pos");
         sprintf(buf, "%.4f %.4f", 
           nmea->getLatitude()/1000000., nmea->getLongitude()/1000000.);
@@ -473,6 +573,58 @@ public:
       }
       if (sensors_scroll) sensors_scroll_offset = (sensors_scroll_offset+1)%sensors_nb;
       else sensors_scroll_offset = 0;
+#endif
+#if HAS_BQ27220
+    } else if (_page == HomePage::BATTERY) {
+      char buf[30];
+      int y = 18;
+
+      // Title
+      display.setColor(DisplayDriver::GREEN);
+      display.drawTextCentered(display.width() / 2, y, "Battery Gauge");
+      y += 12;
+
+      display.setColor(DisplayDriver::LIGHT);
+
+      // Time to empty
+      uint16_t tte = board.getTimeToEmpty();
+      display.drawTextLeftAlign(0, y, "remaining");
+      if (tte == 0xFFFF || tte == 0) {
+        strcpy(buf, tte == 0 ? "depleted" : "charging");
+      } else if (tte >= 60) {
+        sprintf(buf, "%dh %dm", tte / 60, tte % 60);
+      } else {
+        sprintf(buf, "%d min", tte);
+      }
+      display.drawTextRightAlign(display.width()-1, y, buf);
+      y += 10;
+
+      // Average current
+      int16_t avgCur = board.getAvgCurrent();
+      display.drawTextLeftAlign(0, y, "avg current");
+      sprintf(buf, "%d mA", avgCur);
+      display.drawTextRightAlign(display.width()-1, y, buf);
+      y += 10;
+
+      // Average power
+      int16_t avgPow = board.getAvgPower();
+      display.drawTextLeftAlign(0, y, "avg power");
+      sprintf(buf, "%d mW", avgPow);
+      display.drawTextRightAlign(display.width()-1, y, buf);
+      y += 10;
+
+      // Voltage (already available)
+      uint16_t mv = board.getBattMilliVolts();
+      display.drawTextLeftAlign(0, y, "voltage");
+      sprintf(buf, "%d.%03d V", mv / 1000, mv % 1000);
+      display.drawTextRightAlign(display.width()-1, y, buf);
+      y += 10;
+
+      // Remaining capacity
+      uint16_t remCap = board.getRemainingCapacity();
+      display.drawTextLeftAlign(0, y, "remaining cap");
+      sprintf(buf, "%d mAh", remCap);
+      display.drawTextRightAlign(display.width()-1, y, buf);
 #endif
     } else if (_page == HomePage::SHUTDOWN) {
       display.setColor(DisplayDriver::GREEN);
@@ -533,6 +685,7 @@ public:
       }
       return true;
     }
+#ifdef BLE_PIN_CODE
     if (c == KEY_ENTER && _page == HomePage::BLUETOOTH) {
       if (_task->isSerialEnabled()) {  // toggle Bluetooth on/off
         _task->disableSerial();
@@ -541,6 +694,7 @@ public:
       }
       return true;
     }
+#endif
     if (c == KEY_ENTER && _page == HomePage::ADVERT) {
       _task->notify(UIEventType::ack);
       if (the_mesh.advert()) {
@@ -708,6 +862,12 @@ void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* no
   vibration.begin();
 #endif
 
+  // Keyboard backlight for message flash notifications
+#ifdef KB_BL_PIN
+  pinMode(KB_BL_PIN, OUTPUT);
+  digitalWrite(KB_BL_PIN, LOW);
+#endif
+
   ui_started_at = millis();
   _alert_expiry = 0;
 
@@ -717,7 +877,10 @@ void UITask::begin(DisplayDriver* display, SensorManager* sensors, NodePrefs* no
   channel_screen = new ChannelScreen(this, &rtc_clock);
   contacts_screen = new ContactsScreen(this, &rtc_clock);
   text_reader = new TextReaderScreen(this);
+  notes_screen = new NotesScreen(this);
   settings_screen = new SettingsScreen(this, &rtc_clock, node_prefs);
+  repeater_admin = nullptr;  // Lazy-initialized on first use to preserve heap for audio
+  audiobook_screen = nullptr;  // Created and assigned from main.cpp if audio hardware present
   setCurrScreen(splash);
 }
 
@@ -759,12 +922,13 @@ switch(t){
 
 void UITask::msgRead(int msgcount) {
   _msgcount = msgcount;
-  if (msgcount == 0) {
+  if (msgcount == 0 && curr == msg_preview) {
     gotoHomeScreen();
   }
 }
 
-void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) {
+void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount,
+                    const uint8_t* path) {
   _msgcount = msgcount;
 
   // Add to preview screen (for notifications on non-keyboard devices)
@@ -782,15 +946,18 @@ void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, i
     }
   }
   
-  // Add to channel history screen with channel index
-  ((ChannelScreen *) channel_screen)->addMessage(channel_idx, path_len, from_name, text);
+  // Add to channel history screen with channel index and path data
+  ((ChannelScreen *) channel_screen)->addMessage(channel_idx, path_len, from_name, text, path);
   
 #if defined(LilyGo_TDeck_Pro)
   // T-Deck Pro: Don't interrupt user with popup - just show brief notification
   // Messages are stored in channel history, accessible via 'M' key
-  char alertBuf[40];
-  snprintf(alertBuf, sizeof(alertBuf), "New: %s", from_name);
-  showAlert(alertBuf, 2000);
+  // Suppress alert entirely on admin screen - it needs focused interaction
+  if (!isOnRepeaterAdmin()) {
+    char alertBuf[40];
+    snprintf(alertBuf, sizeof(alertBuf), "New: %s", from_name);
+    showAlert(alertBuf, 2000);
+  }
 #else
   // Other devices: Show full preview screen (legacy behavior)
   setCurrScreen(msg_preview);
@@ -805,6 +972,14 @@ void UITask::newMsg(uint8_t path_len, const char* from_name, const char* text, i
     _next_refresh = 100;  // trigger refresh
     }
   }
+
+  // Keyboard flash notification
+#ifdef KB_BL_PIN
+  if (_node_prefs->kb_flash_notify) {
+    digitalWrite(KB_BL_PIN, HIGH);
+    _kb_flash_off_at = millis() + 200;  // 200ms flash
+  }
+#endif
 }
 
 void UITask::userLedHandler() {
@@ -940,6 +1115,14 @@ void UITask::loop() {
 
   userLedHandler();
 
+  // Turn off keyboard flash after timeout
+#ifdef KB_BL_PIN
+  if (_kb_flash_off_at && millis() >= _kb_flash_off_at) {
+    digitalWrite(KB_BL_PIN, LOW);
+    _kb_flash_off_at = 0;
+  }
+#endif
+
 #ifdef PIN_BUZZER
   if (buzzer.isPlaying())  buzzer.loop();
 #endif
@@ -1037,39 +1220,36 @@ char UITask::handleTripleClick(char c) {
 }
 
 bool UITask::getGPSState() {
-  if (_sensors != NULL) {
-    int num = _sensors->getNumSettings();
-    for (int i = 0; i < num; i++) {
-      if (strcmp(_sensors->getSettingName(i), "gps") == 0) {
-        return !strcmp(_sensors->getSettingValue(i), "1");
-      }
-    }
-  } 
-  return false;
+  #if ENV_INCLUDE_GPS == 1
+    return _node_prefs != NULL && _node_prefs->gps_enabled;
+  #else
+    return false;
+  #endif
 }
 
 void UITask::toggleGPS() {
+  #if ENV_INCLUDE_GPS == 1
+    extern GPSDutyCycle gpsDuty;
+
     if (_sensors != NULL) {
-    // toggle GPS on/off
-    int num = _sensors->getNumSettings();
-    for (int i = 0; i < num; i++) {
-      if (strcmp(_sensors->getSettingName(i), "gps") == 0) {
-        if (strcmp(_sensors->getSettingValue(i), "1") == 0) {
-          _sensors->setSettingValue("gps", "0");
-          _node_prefs->gps_enabled = 0;
-          notify(UIEventType::ack);
-        } else {
-          _sensors->setSettingValue("gps", "1");
-          _node_prefs->gps_enabled = 1;
-          notify(UIEventType::ack);
-        }
-        the_mesh.savePrefs();
-        showAlert(_node_prefs->gps_enabled ? "GPS: Enabled" : "GPS: Disabled", 800);
-        _next_refresh = 0;
-        break;
+      if (_node_prefs->gps_enabled) {
+        // Disable GPS — cut hardware power
+        _sensors->setSettingValue("gps", "0");
+        _node_prefs->gps_enabled = 0;
+        gpsDuty.disable();
+        notify(UIEventType::ack);
+      } else {
+        // Enable GPS — start duty cycle
+        _sensors->setSettingValue("gps", "1");
+        _node_prefs->gps_enabled = 1;
+        gpsDuty.enable();
+        notify(UIEventType::ack);
       }
+      the_mesh.savePrefs();
+      showAlert(_node_prefs->gps_enabled ? "GPS: Enabled" : "GPS: Disabled", 800);
+      _next_refresh = 0;
     }
-  }
+  #endif
 }
 
 void UITask::toggleBuzzer() {
@@ -1157,8 +1337,21 @@ void UITask::gotoTextReader() {
   _next_refresh = 100;
 }
 
+void UITask::gotoNotesScreen() {
+  NotesScreen* notes = (NotesScreen*)notes_screen;
+  if (_display != NULL) {
+    notes->enter(*_display);
+  }
+  setCurrScreen(notes_screen);
+  if (_display != NULL && !_display->isOn()) {
+    _display->turnOn();
+  }
+  _auto_off = millis() + AUTO_OFF_MILLIS;
+  _next_refresh = 100;
+}
+
 void UITask::gotoSettingsScreen() {
-  ((SettingsScreen*)settings_screen)->enter();
+  ((SettingsScreen *) settings_screen)->enter();
   setCurrScreen(settings_screen);
   if (_display != NULL && !_display->isOn()) {
     _display->turnOn();
@@ -1168,7 +1361,7 @@ void UITask::gotoSettingsScreen() {
 }
 
 void UITask::gotoOnboarding() {
-  ((SettingsScreen*)settings_screen)->enterOnboarding();
+  ((SettingsScreen *) settings_screen)->enterOnboarding();
   setCurrScreen(settings_screen);
   if (_display != NULL && !_display->isOn()) {
     _display->turnOn();
@@ -1177,6 +1370,22 @@ void UITask::gotoOnboarding() {
   _next_refresh = 100;
 }
 
+void UITask::gotoAudiobookPlayer() {
+#ifdef MECK_AUDIO_VARIANT
+  if (audiobook_screen == nullptr) return;  // No audio hardware
+  AudiobookPlayerScreen* abPlayer = (AudiobookPlayerScreen*)audiobook_screen;
+  if (_display != NULL) {
+    abPlayer->enter(*_display);
+  }
+  setCurrScreen(audiobook_screen);
+  if (_display != NULL && !_display->isOn()) {
+    _display->turnOn();
+  }
+  _auto_off = millis() + AUTO_OFF_MILLIS;
+  _next_refresh = 100;
+#endif
+}
+
 uint8_t UITask::getChannelScreenViewIdx() const {
   return ((ChannelScreen *) channel_screen)->getViewChannelIdx();
 }
@@ -1188,4 +1397,57 @@ void UITask::addSentChannelMessage(uint8_t channel_idx, const char* sender, cons
   
   // Add to channel history with path_len=0 (local message)
   ((ChannelScreen *) channel_screen)->addMessage(channel_idx, 0, sender, formattedMsg);
-}
+}
+
+void UITask::gotoRepeaterAdmin(int contactIdx) {
+  // Lazy-initialize on first use (same pattern as audiobook player)
+  if (repeater_admin == nullptr) {
+    repeater_admin = new RepeaterAdminScreen(this, &rtc_clock);
+  }
+
+  // Get contact name for the screen header
+  ContactInfo contact;
+  char name[32] = "Unknown";
+  if (the_mesh.getContactByIdx(contactIdx, contact)) {
+    strncpy(name, contact.name, sizeof(name) - 1);
+    name[sizeof(name) - 1] = '\0';
+  }
+
+  RepeaterAdminScreen* admin = (RepeaterAdminScreen*)repeater_admin;
+  admin->openForContact(contactIdx, name);
+  setCurrScreen(repeater_admin);
+
+  if (_display != NULL && !_display->isOn()) {
+    _display->turnOn();
+  }
+  _auto_off = millis() + AUTO_OFF_MILLIS;
+  _next_refresh = 100;
+}
+
+void UITask::onAdminLoginResult(bool success, uint8_t permissions, uint32_t server_time) {
+  if (repeater_admin && isOnRepeaterAdmin()) {
+    ((RepeaterAdminScreen*)repeater_admin)->onLoginResult(success, permissions, server_time);
+    _next_refresh = 100;  // trigger re-render
+  }
+}
+
+void UITask::onAdminCliResponse(const char* from_name, const char* text) {
+  if (repeater_admin && isOnRepeaterAdmin()) {
+    ((RepeaterAdminScreen*)repeater_admin)->onCliResponse(text);
+    _next_refresh = 100;  // trigger re-render
+  }
+}
+
+#ifdef MECK_AUDIO_VARIANT
+bool UITask::isAudioPlayingInBackground() const {
+  if (!audiobook_screen) return false;
+  AudiobookPlayerScreen* player = (AudiobookPlayerScreen*)audiobook_screen;
+  return player->isAudioActive();
+}
+
+bool UITask::isAudioPausedInBackground() const {
+  if (!audiobook_screen) return false;
+  AudiobookPlayerScreen* player = (AudiobookPlayerScreen*)audiobook_screen;
+  return player->isBookOpen() && !player->isAudioActive();
+}
+#endif

examples/companion_radio/ui-new/UITask.h

@@ -32,6 +32,7 @@ class UITask : public AbstractUITask {
   GenericVibration vibration;
 #endif
   unsigned long _next_refresh, _auto_off;
+  unsigned long _kb_flash_off_at;          // Keyboard flash turn-off timer
   NodePrefs* _node_prefs;
   char _alert[80];
   unsigned long _alert_expiry;
@@ -54,7 +55,10 @@ class UITask : public AbstractUITask {
   UIScreen* channel_screen;  // Channel message history screen
   UIScreen* contacts_screen; // Contacts list screen
   UIScreen* text_reader;     // *** NEW: Text reader screen ***
+  UIScreen* notes_screen;    // Notes editor screen
   UIScreen* settings_screen; // Settings/onboarding screen
+  UIScreen* audiobook_screen; // Audiobook player screen (null if not available)
+  UIScreen* repeater_admin;   // Repeater admin screen
   UIScreen* curr;
 
   void userLedHandler();
@@ -71,6 +75,7 @@ public:
 
   UITask(mesh::MainBoard* board, BaseSerialInterface* serial) : AbstractUITask(board, serial), _display(NULL), _sensors(NULL) {
     next_batt_chck = _next_refresh = 0;
+    _kb_flash_off_at = 0;
     ui_started_at = 0;
     curr = NULL;
   }
@@ -80,8 +85,11 @@ public:
   void gotoChannelScreen();  // Navigate to channel message screen
   void gotoContactsScreen(); // Navigate to contacts list
   void gotoTextReader();     // *** NEW: Navigate to text reader ***
+  void gotoNotesScreen();    // Navigate to notes editor
   void gotoSettingsScreen(); // Navigate to settings
   void gotoOnboarding();     // Navigate to settings in onboarding mode
+  void gotoAudiobookPlayer(); // Navigate to audiobook player
+  void gotoRepeaterAdmin(int contactIdx);  // Navigate to repeater admin
   void showAlert(const char* text, int duration_millis) override;
   void forceRefresh() override { _next_refresh = 100; }
   int  getMsgCount() const { return _msgcount; }
@@ -90,7 +98,16 @@ public:
   bool isOnChannelScreen() const { return curr == channel_screen; }
   bool isOnContactsScreen() const { return curr == contacts_screen; }
   bool isOnTextReader() const { return curr == text_reader; }  // *** NEW ***
+  bool isOnNotesScreen() const { return curr == notes_screen; }
   bool isOnSettingsScreen() const { return curr == settings_screen; }
+  bool isOnAudiobookPlayer() const { return curr == audiobook_screen; }
+  bool isOnRepeaterAdmin() const { return curr == repeater_admin; }
+
+#ifdef MECK_AUDIO_VARIANT
+  // Check if audio is playing/paused in the background (for status indicators)
+  bool isAudioPlayingInBackground() const;
+  bool isAudioPausedInBackground() const;
+#endif
   uint8_t getChannelScreenViewIdx() const;
 
   void toggleBuzzer();
@@ -105,18 +122,27 @@ public:
   
   // Add a sent message to the channel screen history
   void addSentChannelMessage(uint8_t channel_idx, const char* sender, const char* text) override;
+
+  // Repeater admin callbacks
+  void onAdminLoginResult(bool success, uint8_t permissions, uint32_t server_time) override;
+  void onAdminCliResponse(const char* from_name, const char* text) override;
   
   // Get current screen for checking state
   UIScreen* getCurrentScreen() const { return curr; }
   UIScreen* getMsgPreviewScreen() const { return msg_preview; }
   UIScreen* getTextReaderScreen() const { return text_reader; }  // *** NEW ***
+  UIScreen* getNotesScreen() const { return notes_screen; }
   UIScreen* getContactsScreen() const { return contacts_screen; }
   UIScreen* getChannelScreen() const { return channel_screen; }
   UIScreen* getSettingsScreen() const { return settings_screen; }
+  UIScreen* getAudiobookScreen() const { return audiobook_screen; }
+  void setAudiobookScreen(UIScreen* s) { audiobook_screen = s; }
+  UIScreen* getRepeaterAdminScreen() const { return repeater_admin; }
 
   // from AbstractUITask
   void msgRead(int msgcount) override;
-  void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount) override;
+  void newMsg(uint8_t path_len, const char* from_name, const char* text, int msgcount,
+             const uint8_t* path = nullptr) override;
   void notify(UIEventType t = UIEventType::none) override;
   void loop() override;
 

examples/companion_radio/ui-new/Utf8cp437.h

@@ -0,0 +1,152 @@
+#pragma once
+// =============================================================================
+// Utf8CP437.h - UTF-8 decoding and Unicode-to-CP437 mapping
+//
+// The Adafruit GFX built-in 6x8 font uses the CP437 character set for codes
+// 128-255. This header provides utilities to:
+//   1. Decode UTF-8 multi-byte sequences into Unicode codepoints
+//   2. Map Unicode codepoints to CP437 byte values for display
+//
+// Used by both EpubProcessor (at XHTML→text conversion time) and
+// TextReaderScreen (at render time for plain .txt files).
+// =============================================================================
+
+// Map a Unicode codepoint to its CP437 equivalent byte.
+// Returns the CP437 byte (0x80-0xFF) for supported accented characters,
+// the codepoint itself for ASCII (0x20-0x7E), or 0 if unmappable.
+inline uint8_t unicodeToCP437(uint32_t cp) {
+  // ASCII passthrough
+  if (cp >= 0x20 && cp < 0x7F) return (uint8_t)cp;
+
+  switch (cp) {
+    // Uppercase accented
+    case 0x00C7: return 0x80;  // Ç
+    case 0x00C9: return 0x90;  // É
+    case 0x00C4: return 0x8E;  // Ä
+    case 0x00C5: return 0x8F;  // Å
+    case 0x00C6: return 0x92;  // Æ
+    case 0x00D6: return 0x99;  // Ö
+    case 0x00DC: return 0x9A;  // Ü
+    case 0x00D1: return 0xA5;  // Ñ
+
+    // Lowercase accented
+    case 0x00E9: return 0x82;  // é
+    case 0x00E2: return 0x83;  // â
+    case 0x00E4: return 0x84;  // ä
+    case 0x00E0: return 0x85;  // à
+    case 0x00E5: return 0x86;  // å
+    case 0x00E7: return 0x87;  // ç
+    case 0x00EA: return 0x88;  // ê
+    case 0x00EB: return 0x89;  // ë
+    case 0x00E8: return 0x8A;  // è
+    case 0x00EF: return 0x8B;  // ï
+    case 0x00EE: return 0x8C;  // î
+    case 0x00EC: return 0x8D;  // ì
+    case 0x00E6: return 0x91;  // æ
+    case 0x00F4: return 0x93;  // ô
+    case 0x00F6: return 0x94;  // ö
+    case 0x00F2: return 0x95;  // ò
+    case 0x00FB: return 0x96;  // û
+    case 0x00F9: return 0x97;  // ù
+    case 0x00FF: return 0x98;  // ÿ
+    case 0x00FC: return 0x81;  // ü
+    case 0x00E1: return 0xA0;  // á
+    case 0x00ED: return 0xA1;  // í
+    case 0x00F3: return 0xA2;  // ó
+    case 0x00FA: return 0xA3;  // ú
+    case 0x00F1: return 0xA4;  // ñ
+
+    // Currency / symbols
+    case 0x00A2: return 0x9B;  // ¢
+    case 0x00A3: return 0x9C;  // £
+    case 0x00A5: return 0x9D;  // ¥
+    case 0x00BF: return 0xA8;  // ¿
+    case 0x00A1: return 0xAD;  // ¡
+    case 0x00AB: return 0xAE;  // «
+    case 0x00BB: return 0xAF;  // »
+    case 0x00B0: return 0xF8;  // °
+    case 0x00B1: return 0xF1;  // ±
+    case 0x00B5: return 0xE6;  // µ
+    case 0x00DF: return 0xE1;  // ß
+
+    // Typographic (smart quotes, dashes, etc.)
+    case 0x2018: case 0x2019: return '\'';  // Smart single quotes
+    case 0x201C: case 0x201D: return '"';   // Smart double quotes
+    case 0x2013: case 0x2014: return '-';   // En/em dash
+    case 0x2010: case 0x2011: case 0x2012: case 0x2015: return '-'; // Hyphens/bars
+    case 0x2026: return 0xFD;              // Ellipsis (CP437 has no …, use ²? no, skip)
+    case 0x2022: return 0x07;              // Bullet → CP437 bullet
+    case 0x00A0: return ' ';               // Non-breaking space
+    case 0x2039: case 0x203A: return '\''; // Single guillemets
+    case 0x2032: return '\'';              // Prime
+    case 0x2033: return '"';               // Double prime
+
+    default: return 0;  // Unmappable
+  }
+}
+
+// Decode a single UTF-8 character from a byte buffer.
+// Returns the Unicode codepoint and advances *pos past the full sequence.
+// If the sequence is invalid, returns 0xFFFD (replacement char) and advances by 1.
+//
+// buf:    input buffer
+// bufLen: total buffer length
+// pos:    pointer to current position (updated on return)
+inline uint32_t decodeUtf8Char(const char* buf, int bufLen, int* pos) {
+  int i = *pos;
+  if (i >= bufLen) return 0;
+
+  uint8_t c = (uint8_t)buf[i];
+
+  // ASCII (single byte)
+  if (c < 0x80) {
+    *pos = i + 1;
+    return c;
+  }
+
+  // Continuation byte without lead byte — skip
+  if (c < 0xC0) {
+    *pos = i + 1;
+    return 0xFFFD;
+  }
+
+  uint32_t codepoint;
+  int extraBytes;
+
+  if ((c & 0xE0) == 0xC0) {
+    codepoint = c & 0x1F;
+    extraBytes = 1;
+  } else if ((c & 0xF0) == 0xE0) {
+    codepoint = c & 0x0F;
+    extraBytes = 2;
+  } else if ((c & 0xF8) == 0xF0) {
+    codepoint = c & 0x07;
+    extraBytes = 3;
+  } else {
+    *pos = i + 1;
+    return 0xFFFD;
+  }
+
+  // Verify we have enough bytes and they're valid continuation bytes
+  if (i + extraBytes >= bufLen) {
+    *pos = i + 1;
+    return 0xFFFD;
+  }
+
+  for (int b = 1; b <= extraBytes; b++) {
+    uint8_t cb = (uint8_t)buf[i + b];
+    if ((cb & 0xC0) != 0x80) {
+      *pos = i + 1;
+      return 0xFFFD;
+    }
+    codepoint = (codepoint << 6) | (cb & 0x3F);
+  }
+
+  *pos = i + 1 + extraBytes;
+  return codepoint;
+}
+
+// Check if a byte is a UTF-8 continuation byte (10xxxxxx)
+inline bool isUtf8Continuation(uint8_t c) {
+  return (c & 0xC0) == 0x80;
+}

src/helpers/esp32/SerialBLEInterface.cpp

@@ -249,4 +249,4 @@ size_t SerialBLEInterface::checkRecvFrame(uint8_t dest[]) {
 
 bool SerialBLEInterface::isConnected() const {
   return deviceConnected;  //pServer != NULL && pServer->getConnectedCount() > 0;
-}
+}

src/helpers/esp32/SerialBLEInterface.h

@@ -88,4 +88,4 @@ public:
 #else
   #define BLE_DEBUG_PRINT(...) {}
   #define BLE_DEBUG_PRINTLN(...) {}
-#endif
+#endif

variants/lilygo_tdeck_pro/CPUPowerManager.h

@@ -0,0 +1,70 @@
+#pragma once
+
+#include <Arduino.h>
+
+// CPU Frequency Scaling for ESP32-S3
+//
+// Typical current draw (CPU only, rough):
+//   240 MHz  ~70-80 mA
+//   160 MHz  ~50-60 mA
+//    80 MHz  ~30-40 mA
+//
+// SPI peripherals and UART use their own clock dividers from the APB clock,
+// so LoRa, e-ink, and GPS serial all work fine at 80MHz.
+
+#ifdef ESP32
+
+#ifndef CPU_FREQ_IDLE
+#define CPU_FREQ_IDLE   80     // MHz — normal mesh listening
+#endif
+
+#ifndef CPU_FREQ_BOOST
+#define CPU_FREQ_BOOST  240    // MHz — heavy processing
+#endif
+
+#ifndef CPU_BOOST_TIMEOUT_MS
+#define CPU_BOOST_TIMEOUT_MS  10000  // 10 seconds
+#endif
+
+class CPUPowerManager {
+public:
+  CPUPowerManager() : _boosted(false), _boost_started(0) {}
+
+  void begin() {
+    setCpuFrequencyMhz(CPU_FREQ_IDLE);
+    _boosted = false;
+    MESH_DEBUG_PRINTLN("CPU power: idle at %d MHz", CPU_FREQ_IDLE);
+  }
+
+  void loop() {
+    if (_boosted && (millis() - _boost_started >= CPU_BOOST_TIMEOUT_MS)) {
+      setIdle();
+    }
+  }
+
+  void setBoost() {
+    if (!_boosted) {
+      setCpuFrequencyMhz(CPU_FREQ_BOOST);
+      _boosted = true;
+      MESH_DEBUG_PRINTLN("CPU power: boosted to %d MHz", CPU_FREQ_BOOST);
+    }
+    _boost_started = millis();
+  }
+
+  void setIdle() {
+    if (_boosted) {
+      setCpuFrequencyMhz(CPU_FREQ_IDLE);
+      _boosted = false;
+      MESH_DEBUG_PRINTLN("CPU power: idle at %d MHz", CPU_FREQ_IDLE);
+    }
+  }
+
+  bool isBoosted() const { return _boosted; }
+  uint32_t getFrequencyMHz() const { return getCpuFrequencyMhz(); }
+
+private:
+  bool _boosted;
+  unsigned long _boost_started;
+};
+
+#endif // ESP32

variants/lilygo_tdeck_pro/GPSDutyCycle.h

@@ -0,0 +1,185 @@
+#pragma once
+
+#include <Arduino.h>
+#include "variant.h"
+#include "GPSStreamCounter.h"
+
+// GPS Duty Cycle Manager
+// Controls the hardware GPS enable pin (PIN_GPS_EN) to save power.
+// When enabled, cycles between acquiring a fix and sleeping with power cut.
+//
+// States:
+//   OFF        – User has disabled GPS. Hardware power is cut.
+//   ACQUIRING  – GPS module powered on, waiting for a fix or timeout.
+//   SLEEPING   – GPS module powered off, timer counting down to next cycle.
+
+#if HAS_GPS
+
+// How long to leave GPS powered on while acquiring a fix (ms)
+#ifndef GPS_ACQUIRE_TIMEOUT_MS
+#define GPS_ACQUIRE_TIMEOUT_MS    180000   // 3 minutes
+#endif
+
+// How long to sleep between acquisition cycles (ms)
+#ifndef GPS_SLEEP_DURATION_MS
+#define GPS_SLEEP_DURATION_MS     900000   // 15 minutes
+#endif
+
+// If we get a fix quickly, power off immediately but still respect
+// a minimum on-time so the RTC can sync properly
+#ifndef GPS_MIN_ON_TIME_MS
+#define GPS_MIN_ON_TIME_MS        5000     // 5 seconds after fix
+#endif
+
+enum class GPSDutyState : uint8_t {
+  OFF = 0,       // User-disabled, hardware power off
+  ACQUIRING,     // Hardware on, waiting for fix
+  SLEEPING       // Hardware off, timer running
+};
+
+class GPSDutyCycle {
+public:
+  GPSDutyCycle() : _state(GPSDutyState::OFF), _state_entered(0),
+                   _last_fix_time(0), _got_fix(false), _time_synced(false),
+                   _stream(nullptr) {}
+
+  // Attach the stream counter so we can reset it on power cycles
+  void setStreamCounter(GPSStreamCounter* stream) { _stream = stream; }
+
+  // Call once in setup() after board.begin() and GPS serial init.
+  void begin(bool initial_enable) {
+    if (initial_enable) {
+      _powerOn();
+      _setState(GPSDutyState::ACQUIRING);
+    } else {
+      _powerOff();
+      _setState(GPSDutyState::OFF);
+    }
+  }
+
+  // Call every iteration of loop().
+  // Returns true if GPS hardware is currently powered on.
+  bool loop() {
+    switch (_state) {
+      case GPSDutyState::OFF:
+        return false;
+
+      case GPSDutyState::ACQUIRING: {
+        unsigned long elapsed = millis() - _state_entered;
+
+        if (_got_fix && elapsed >= GPS_MIN_ON_TIME_MS) {
+          MESH_DEBUG_PRINTLN("GPS duty: fix acquired, powering off for %u min",
+                             (unsigned)(GPS_SLEEP_DURATION_MS / 60000));
+          _powerOff();
+          _setState(GPSDutyState::SLEEPING);
+          return false;
+        }
+
+        if (elapsed >= GPS_ACQUIRE_TIMEOUT_MS) {
+          MESH_DEBUG_PRINTLN("GPS duty: acquire timeout (%us), sleeping",
+                             (unsigned)(GPS_ACQUIRE_TIMEOUT_MS / 1000));
+          _powerOff();
+          _setState(GPSDutyState::SLEEPING);
+          return false;
+        }
+
+        return true;
+      }
+
+      case GPSDutyState::SLEEPING: {
+        if (millis() - _state_entered >= GPS_SLEEP_DURATION_MS) {
+          MESH_DEBUG_PRINTLN("GPS duty: waking up for next acquisition cycle");
+          _got_fix = false;
+          _powerOn();
+          _setState(GPSDutyState::ACQUIRING);
+          return true;
+        }
+        return false;
+      }
+    }
+    return false;
+  }
+
+  void notifyFix() {
+    if (_state == GPSDutyState::ACQUIRING && !_got_fix) {
+      _got_fix = true;
+      _last_fix_time = millis();
+      MESH_DEBUG_PRINTLN("GPS duty: fix notification received");
+    }
+  }
+
+  void notifyTimeSync() {
+    _time_synced = true;
+  }
+
+  void enable() {
+    if (_state == GPSDutyState::OFF) {
+      _got_fix = false;
+      _powerOn();
+      _setState(GPSDutyState::ACQUIRING);
+      MESH_DEBUG_PRINTLN("GPS duty: enabled, starting acquisition");
+    }
+  }
+
+  void disable() {
+    _powerOff();
+    _setState(GPSDutyState::OFF);
+    _got_fix = false;
+    MESH_DEBUG_PRINTLN("GPS duty: disabled, power off");
+  }
+
+  void forceWake() {
+    if (_state == GPSDutyState::SLEEPING) {
+      _got_fix = false;
+      _powerOn();
+      _setState(GPSDutyState::ACQUIRING);
+      MESH_DEBUG_PRINTLN("GPS duty: forced wake for user request");
+    }
+  }
+
+  GPSDutyState getState() const { return _state; }
+  bool isHardwareOn() const { return _state == GPSDutyState::ACQUIRING; }
+  bool hadFix() const { return _got_fix; }
+  bool hasTimeSynced() const { return _time_synced; }
+
+  uint32_t sleepRemainingSecs() const {
+    if (_state != GPSDutyState::SLEEPING) return 0;
+    unsigned long elapsed = millis() - _state_entered;
+    if (elapsed >= GPS_SLEEP_DURATION_MS) return 0;
+    return (GPS_SLEEP_DURATION_MS - elapsed) / 1000;
+  }
+
+  uint32_t acquireElapsedSecs() const {
+    if (_state != GPSDutyState::ACQUIRING) return 0;
+    return (millis() - _state_entered) / 1000;
+  }
+
+private:
+  void _powerOn() {
+    #ifdef PIN_GPS_EN
+      digitalWrite(PIN_GPS_EN, GPS_EN_ACTIVE);
+      delay(10);
+    #endif
+    if (_stream) _stream->resetCounters();
+  }
+
+  void _powerOff() {
+    #ifdef PIN_GPS_EN
+      digitalWrite(PIN_GPS_EN, !GPS_EN_ACTIVE);
+    #endif
+  }
+
+  void _setState(GPSDutyState s) {
+    _state = s;
+    _state_entered = millis();
+  }
+
+  GPSDutyState _state;
+  unsigned long _state_entered;
+  unsigned long _last_fix_time;
+  bool _got_fix;
+  bool _time_synced;
+  GPSStreamCounter* _stream;
+};
+
+#endif // HAS_GPS

variants/lilygo_tdeck_pro/GPSStreamCounter.h

@@ -0,0 +1,72 @@
+#pragma once
+
+#include <Arduino.h>
+
+// Transparent Stream wrapper that counts NMEA sentences (newline-delimited)
+// flowing from the GPS serial port to the MicroNMEA parser.
+//
+// Usage:  Instead of  MicroNMEALocationProvider gps(Serial2, &rtc_clock);
+//         Use:        GPSStreamCounter gpsStream(Serial2);
+//                     MicroNMEALocationProvider gps(gpsStream, &rtc_clock);
+//
+// Every read() call passes through to the underlying stream; when a '\n'
+// is seen the sentence counter increments.  This lets the UI display a
+// live "nmea" count so users can confirm the baud rate is correct and
+// the GPS module is actually sending data.
+
+class GPSStreamCounter : public Stream {
+public:
+  GPSStreamCounter(Stream& inner)
+    : _inner(inner), _sentences(0), _sentences_snapshot(0),
+      _last_snapshot(0), _sentences_per_sec(0) {}
+
+  // --- Stream read interface (passes through) ---
+  int available() override { return _inner.available(); }
+  int peek()      override { return _inner.peek(); }
+
+  int read() override {
+    int c = _inner.read();
+    if (c == '\n') {
+      _sentences++;
+    }
+    return c;
+  }
+
+  // --- Stream write interface (pass through for NMEA commands if needed) ---
+  size_t write(uint8_t b) override { return _inner.write(b); }
+
+  // --- Sentence counting API ---
+
+  // Total sentences received since boot (or last reset)
+  uint32_t getSentenceCount() const { return _sentences; }
+
+  // Sentences received per second (updated each time you call it,
+  // with a 1-second rolling window)
+  uint16_t getSentencesPerSec() {
+    unsigned long now = millis();
+    unsigned long elapsed = now - _last_snapshot;
+    if (elapsed >= 1000) {
+      uint32_t delta = _sentences - _sentences_snapshot;
+      // Scale to per-second if interval wasn't exactly 1000ms
+      _sentences_per_sec = (uint16_t)((delta * 1000UL) / elapsed);
+      _sentences_snapshot = _sentences;
+      _last_snapshot = now;
+    }
+    return _sentences_per_sec;
+  }
+
+  // Reset all counters (e.g. when GPS hardware power cycles)
+  void resetCounters() {
+    _sentences = 0;
+    _sentences_snapshot = 0;
+    _sentences_per_sec = 0;
+    _last_snapshot = millis();
+  }
+
+private:
+  Stream& _inner;
+  volatile uint32_t _sentences;
+  uint32_t _sentences_snapshot;
+  unsigned long _last_snapshot;
+  uint16_t _sentences_per_sec;
+};

variants/lilygo_tdeck_pro/TDeckBoard.cpp

@@ -72,10 +72,11 @@ void TDeckBoard::begin() {
     rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
   }
   
-  // Test BQ27220 communication
+  // Test BQ27220 communication and configure design capacity
   #if HAS_BQ27220
     uint16_t voltage = getBattMilliVolts();
     MESH_DEBUG_PRINTLN("TDeckBoard::begin() - Battery voltage: %d mV", voltage);
+    configureFuelGauge();
   #endif
   
   MESH_DEBUG_PRINTLN("TDeckBoard::begin() - complete");
@@ -123,4 +124,233 @@ uint8_t TDeckBoard::getBatteryPercent() {
   #else
     return 0;
   #endif
+}
+
+// ---- BQ27220 extended register helpers ----
+
+#if HAS_BQ27220
+// Read a 16-bit register from BQ27220. Returns 0 on I2C error.
+static uint16_t bq27220_read16(uint8_t reg) {
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(reg);
+  if (Wire.endTransmission(false) != 0) return 0;
+  if (Wire.requestFrom((uint8_t)BQ27220_I2C_ADDR, (uint8_t)2) != 2) return 0;
+  uint16_t val = Wire.read();
+  val |= (Wire.read() << 8);
+  return val;
+}
+
+// Read a single byte from BQ27220 register.
+static uint8_t bq27220_read8(uint8_t reg) {
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(reg);
+  if (Wire.endTransmission(false) != 0) return 0;
+  if (Wire.requestFrom((uint8_t)BQ27220_I2C_ADDR, (uint8_t)1) != 1) return 0;
+  return Wire.read();
+}
+
+// Write a 16-bit subcommand to BQ27220 Control register (0x00).
+// Subcommands control unsealing, config mode, sealing, etc.
+static bool bq27220_writeControl(uint16_t subcmd) {
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(0x00);                    // Control register
+  Wire.write(subcmd & 0xFF);           // LSB first
+  Wire.write((subcmd >> 8) & 0xFF);    // MSB
+  return Wire.endTransmission() == 0;
+}
+#endif
+
+// ---- BQ27220 Design Capacity configuration ----
+// The BQ27220 ships with a 3000 mAh default. The T-Deck Pro uses a 1400 mAh
+// cell. This function checks on boot and writes the correct value via the
+// MAC Data Memory interface if needed. The value persists in battery-backed
+// RAM, so this typically only writes once (or after a full battery disconnect).
+//
+// Procedure follows TI TRM SLUUBD4A Section 6.1:
+//   1. Unseal  →  2. Full Access  →  3. Enter CFG_UPDATE
+//   4. Write Design Capacity via MAC  →  5. Exit CFG_UPDATE  →  6. Seal
+
+bool TDeckBoard::configureFuelGauge(uint16_t designCapacity_mAh) {
+#if HAS_BQ27220
+  // Read current design capacity from standard command register
+  uint16_t currentDC = bq27220_read16(BQ27220_REG_DESIGN_CAP);
+  Serial.printf("BQ27220: Design Capacity = %d mAh (target %d)\n", currentDC, designCapacity_mAh);
+
+  if (currentDC == designCapacity_mAh) {
+    Serial.println("BQ27220: Design Capacity already correct, skipping");
+    return true;
+  }
+
+  Serial.printf("BQ27220: Updating Design Capacity from %d to %d mAh\n", currentDC, designCapacity_mAh);
+
+  // Step 1: Unseal (default unseal keys)
+  bq27220_writeControl(0x0414);
+  delay(2);
+  bq27220_writeControl(0x3672);
+  delay(2);
+
+  // Step 2: Enter Full Access mode
+  bq27220_writeControl(0xFFFF);
+  delay(2);
+  bq27220_writeControl(0xFFFF);
+  delay(2);
+
+  // Step 3: Enter CFG_UPDATE mode
+  bq27220_writeControl(0x0090);
+
+  // Wait for CFGUPMODE bit (bit 10) in OperationStatus register
+  bool cfgReady = false;
+  for (int i = 0; i < 50; i++) {
+    delay(20);
+    uint16_t opStatus = bq27220_read16(BQ27220_REG_OP_STATUS);
+    Serial.printf("BQ27220: OperationStatus = 0x%04X (attempt %d)\n", opStatus, i);
+    if (opStatus & 0x0400) {  // CFGUPMODE is bit 10
+      cfgReady = true;
+      break;
+    }
+  }
+  if (!cfgReady) {
+    Serial.println("BQ27220: ERROR - Timeout waiting for CFGUPDATE mode");
+    bq27220_writeControl(0x0092);  // Try to exit cleanly
+    bq27220_writeControl(0x0030);  // Re-seal
+    return false;
+  }
+  Serial.println("BQ27220: Entered CFGUPDATE mode");
+
+  // Step 4: Write Design Capacity via MAC Data Memory interface
+  // Design Capacity mAh lives at data memory address 0x929F
+
+  // 4a. Select the data memory block by writing address to 0x3E-0x3F
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(0x3E);   // MACDataControl register
+  Wire.write(0x9F);   // Address low byte
+  Wire.write(0x92);   // Address high byte
+  Wire.endTransmission();
+  delay(10);
+
+  // 4b. Read old data (MSB, LSB) and checksum for differential update
+  uint8_t oldMSB     = bq27220_read8(0x40);
+  uint8_t oldLSB     = bq27220_read8(0x41);
+  uint8_t oldChksum  = bq27220_read8(0x60);
+  uint8_t dataLen    = bq27220_read8(0x61);
+
+  Serial.printf("BQ27220: Old DC bytes=0x%02X 0x%02X chk=0x%02X len=%d\n",
+                     oldMSB, oldLSB, oldChksum, dataLen);
+
+  // 4c. Compute new values (BQ27220 stores big-endian in data memory)
+  uint8_t newMSB = (designCapacity_mAh >> 8) & 0xFF;
+  uint8_t newLSB = designCapacity_mAh & 0xFF;
+
+  // Differential checksum: remove old bytes, add new bytes
+  uint8_t temp = (255 - oldChksum - oldMSB - oldLSB);
+  uint8_t newChksum = 255 - ((temp + newMSB + newLSB) & 0xFF);
+
+  Serial.printf("BQ27220: New DC bytes=0x%02X 0x%02X chk=0x%02X\n",
+                     newMSB, newLSB, newChksum);
+
+  // 4d. Write address + new data as a single block transaction
+  //     BQ27220 MAC requires: [0x3E] [addr_lo] [addr_hi] [data...]
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(0x3E);    // Start at MACDataControl
+  Wire.write(0x9F);    // Address low byte
+  Wire.write(0x92);    // Address high byte
+  Wire.write(newMSB);  // Data byte 0 (at 0x40)
+  Wire.write(newLSB);  // Data byte 1 (at 0x41)
+  uint8_t writeResult = Wire.endTransmission();
+  Serial.printf("BQ27220: Write block result = %d\n", writeResult);
+
+  // 4e. Write updated checksum and length
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(0x60);
+  Wire.write(newChksum);
+  Wire.write(dataLen);
+  writeResult = Wire.endTransmission();
+  Serial.printf("BQ27220: Write checksum result = %d\n", writeResult);
+  delay(10);
+
+  // 4f. Verify the write took effect before exiting config mode
+  //     Re-read the block to confirm
+  Wire.beginTransmission(BQ27220_I2C_ADDR);
+  Wire.write(0x3E);
+  Wire.write(0x9F);
+  Wire.write(0x92);
+  Wire.endTransmission();
+  delay(10);
+  uint8_t verMSB = bq27220_read8(0x40);
+  uint8_t verLSB = bq27220_read8(0x41);
+  Serial.printf("BQ27220: Verify in CFGUPDATE: DC bytes=0x%02X 0x%02X (%d mAh)\n",
+                     verMSB, verLSB, (verMSB << 8) | verLSB);
+
+  // Step 5: Exit CFG_UPDATE (with reinit to apply changes immediately)
+  bq27220_writeControl(0x0091);  // EXIT_CFG_UPDATE_REINIT
+  Serial.println("BQ27220: Sent EXIT_CFG_UPDATE_REINIT, waiting...");
+  delay(200);  // Allow gauge to reinitialize
+
+  // Verify
+  uint16_t verifyDC = bq27220_read16(BQ27220_REG_DESIGN_CAP);
+  Serial.printf("BQ27220: Design Capacity now reads %d mAh (expected %d)\n",
+                     verifyDC, designCapacity_mAh);
+
+  if (verifyDC == designCapacity_mAh) {
+    Serial.println("BQ27220: Configuration SUCCESS");
+  } else {
+    Serial.println("BQ27220: Configuration FAILED");
+  }
+
+  // Step 7: Seal the device
+  bq27220_writeControl(0x0030);
+  delay(5);
+
+  return verifyDC == designCapacity_mAh;
+#else
+  return false;
+#endif
+}
+
+int16_t TDeckBoard::getAvgCurrent() {
+  #if HAS_BQ27220
+    return (int16_t)bq27220_read16(BQ27220_REG_AVG_CURRENT);
+  #else
+    return 0;
+  #endif
+}
+
+int16_t TDeckBoard::getAvgPower() {
+  #if HAS_BQ27220
+    return (int16_t)bq27220_read16(BQ27220_REG_AVG_POWER);
+  #else
+    return 0;
+  #endif
+}
+
+uint16_t TDeckBoard::getTimeToEmpty() {
+  #if HAS_BQ27220
+    return bq27220_read16(BQ27220_REG_TIME_TO_EMPTY);
+  #else
+    return 0xFFFF;
+  #endif
+}
+
+uint16_t TDeckBoard::getRemainingCapacity() {
+  #if HAS_BQ27220
+    return bq27220_read16(BQ27220_REG_REMAIN_CAP);
+  #else
+    return 0;
+  #endif
+}
+
+uint16_t TDeckBoard::getFullChargeCapacity() {
+  #if HAS_BQ27220
+    return bq27220_read16(BQ27220_REG_FULL_CAP);
+  #else
+    return 0;
+  #endif
+}
+
+uint16_t TDeckBoard::getDesignCapacity() {
+  #if HAS_BQ27220
+    return bq27220_read16(BQ27220_REG_DESIGN_CAP);
+  #else
+    return 0;
+  #endif
 }

variants/lilygo_tdeck_pro/TDeckBoard.h

@@ -7,11 +7,23 @@
 #include <driver/rtc_io.h>
 
 // BQ27220 Fuel Gauge Registers
-#define BQ27220_REG_VOLTAGE 0x08
-#define BQ27220_REG_CURRENT 0x0C
-#define BQ27220_REG_SOC 0x2C
+#define BQ27220_REG_VOLTAGE        0x08
+#define BQ27220_REG_CURRENT        0x0C  // Instantaneous current (mA, signed)
+#define BQ27220_REG_SOC            0x2C
+#define BQ27220_REG_REMAIN_CAP     0x10  // Remaining capacity (mAh)
+#define BQ27220_REG_FULL_CAP       0x12  // Full charge capacity (mAh)
+#define BQ27220_REG_AVG_CURRENT    0x14  // Average current (mA, signed)
+#define BQ27220_REG_TIME_TO_EMPTY  0x16  // Minutes until empty
+#define BQ27220_REG_AVG_POWER      0x24  // Average power (mW, signed)
+#define BQ27220_REG_DESIGN_CAP     0x3C  // Design capacity (mAh, read-only standard cmd)
+#define BQ27220_REG_OP_STATUS      0x3A  // Operation status
 #define BQ27220_I2C_ADDR 0x55
 
+// T-Deck Pro battery capacity (all variants use 1400 mAh cell)
+#ifndef BQ27220_DESIGN_CAPACITY_MAH
+#define BQ27220_DESIGN_CAPACITY_MAH  1400
+#endif
+
 class TDeckBoard : public ESP32Board {
 public:
   void begin();
@@ -52,6 +64,27 @@ public:
   // Read state of charge percentage from BQ27220
   uint8_t getBatteryPercent();
 
+  // Read average current in mA (negative = discharging, positive = charging)
+  int16_t getAvgCurrent();
+
+  // Read average power in mW (negative = discharging, positive = charging)
+  int16_t getAvgPower();
+
+  // Read time-to-empty in minutes (0xFFFF if charging/unavailable)
+  uint16_t getTimeToEmpty();
+
+  // Read remaining capacity in mAh
+  uint16_t getRemainingCapacity();
+
+  // Read full charge capacity in mAh (learned value, may need cycling to update)
+  uint16_t getFullChargeCapacity();
+
+  // Read design capacity in mAh (the configured battery size)
+  uint16_t getDesignCapacity();
+
+  // Configure BQ27220 design capacity (checks on boot, writes only if wrong)
+  bool configureFuelGauge(uint16_t designCapacity_mAh = BQ27220_DESIGN_CAPACITY_MAH);
+
   const char* getManufacturerName() const {
     return "LilyGo T-Deck Pro";
   }

variants/lilygo_tdeck_pro/Tca8418keyboard.h

@@ -28,7 +28,10 @@ private:
   uint8_t _addr;
   TwoWire* _wire;
   bool _initialized;
-  bool _shiftActive;   // Sticky shift (one-shot)
+  bool _shiftActive;   // Sticky shift (one-shot or held)
+  bool _shiftConsumed; // Was shift active for the last returned key
+  bool _shiftHeld;     // Shift key physically held down
+  bool _shiftUsedWhileHeld; // Was shift consumed by any key while held
   bool _altActive;     // Sticky alt (one-shot)
   bool _symActive;     // Sticky sym (one-shot)
   unsigned long _lastShiftTime;  // For Shift+key combos
@@ -148,7 +151,7 @@ private:
 public:
   TCA8418Keyboard(uint8_t addr = 0x34, TwoWire* wire = &Wire) 
     : _addr(addr), _wire(wire), _initialized(false), 
-      _shiftActive(false), _altActive(false), _symActive(false), _lastShiftTime(0) {}
+      _shiftActive(false), _shiftConsumed(false), _shiftHeld(false), _shiftUsedWhileHeld(false), _altActive(false), _symActive(false), _lastShiftTime(0) {}
 
   bool begin() {
     // Check if device responds
@@ -203,6 +206,19 @@ public:
     Serial.printf("KB raw: event=0x%02X code=%d pressed=%d count=%d\n", 
                   keyEvent, keyCode, pressed, keyCount);
 
+    // Track shift release (before the general release-ignore)
+    if (!pressed && (keyCode == 35 || keyCode == 31)) {
+      _shiftHeld = false;
+      // If shift was used while held (e.g. cursor nav), clear it completely
+      // so the next bare keypress isn't treated as shifted.
+      // If shift was NOT used (tap-then-release), keep _shiftActive for one-shot.
+      if (_shiftUsedWhileHeld) {
+        _shiftActive = false;
+      }
+      _shiftUsedWhileHeld = false;
+      return 0;
+    }
+
     // Only act on key press, not release
     if (!pressed || keyCode == 0) {
       return 0;
@@ -211,6 +227,8 @@ public:
     // Handle modifier keys - set sticky state and return 0
     if (keyCode == 35 || keyCode == 31) {  // Shift keys
       _shiftActive = true;
+      _shiftHeld = true;
+      _shiftUsedWhileHeld = false;
       _lastShiftTime = millis();
       Serial.println("KB: Shift activated");
       return 0;
@@ -276,7 +294,17 @@ public:
       if (c >= 'a' && c <= 'z') {
         c = c - 'a' + 'A';
       }
-      _shiftActive = false;  // Reset sticky shift
+      // Track that shift was used while physically held
+      if (_shiftHeld) {
+        _shiftUsedWhileHeld = true;
+      }
+      // Only clear shift if it's one-shot (tap), not held down
+      if (!_shiftHeld) {
+        _shiftActive = false;
+      }
+      _shiftConsumed = true; // Record that shift was active for this key
+    } else {
+      _shiftConsumed = false;
     }
     
     if (c != 0) {
@@ -294,4 +322,10 @@ public:
   bool wasShiftRecentlyPressed(unsigned long withinMs = 500) const {
     return (millis() - _lastShiftTime) < withinMs;
   }
+  
+  // Check if shift was active when the most recent key was produced
+  // (immune to e-ink refresh timing unlike wasShiftRecentlyPressed)
+  bool wasShiftConsumed() const {
+    return _shiftConsumed;
+  }
 };

variants/lilygo_tdeck_pro/platformio.ini

@@ -80,6 +80,8 @@ build_flags =
   -D PIN_DISPLAY_BL=45
   -D PIN_USER_BTN=0
   -D CST328_PIN_RST=38
+  -D FIRMWARE_VERSION='"Meck v0.9.1A"'
+  -D ARDUINO_LOOP_STACK_SIZE=32768
 build_src_filter = ${esp32_base.build_src_filter}
   +<../variants/LilyGo_TDeck_Pro>
   +<helpers/sensors/*.cpp>
@@ -90,14 +92,21 @@ lib_deps =
   adafruit/Adafruit GFX Library@^1.11.0
   bakercp/CRC32@^2.0.0
 
-[env:LilyGo_TDeck_Pro_companion_radio_usb]
+; ---------------------------------------------------------------------------
+; Meck unified builds — one codebase, three variants via build flags
+; ---------------------------------------------------------------------------
+
+; Audio + BLE companion (audio-player hardware with BLE phone bridging)
+[env:meck_audio_ble]
 extends = LilyGo_TDeck_Pro
 build_flags =
   ${LilyGo_TDeck_Pro.build_flags}
   -I examples/companion_radio/ui-new
-  -D MAX_CONTACTS=350
-  -D MAX_GROUP_CHANNELS=40
+  -D MAX_CONTACTS=400
+  -D MAX_GROUP_CHANNELS=20
+  -D BLE_PIN_CODE=123456
   -D OFFLINE_QUEUE_SIZE=256
+  -D MECK_AUDIO_VARIANT
 build_src_filter = ${LilyGo_TDeck_Pro.build_src_filter}
   +<helpers/esp32/*.cpp>
   +<helpers/ui/MomentaryButton.cpp>
@@ -107,8 +116,33 @@ build_src_filter = ${LilyGo_TDeck_Pro.build_src_filter}
 lib_deps =
   ${LilyGo_TDeck_Pro.lib_deps}
   densaugeo/base64 @ ~1.4.0
+  https://github.com/schreibfaul1/ESP32-audioI2S.git#2.0.6
+  bitbank2/JPEGDEC
 
-[env:LilyGo_TDeck_Pro_companion_radio_ble]
+; Audio standalone (audio-player hardware, no BLE/WiFi — maximum battery life)
+[env:meck_audio_standalone]
+extends = LilyGo_TDeck_Pro
+build_flags =
+  ${LilyGo_TDeck_Pro.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=256
+  -D MECK_AUDIO_VARIANT
+build_src_filter = ${LilyGo_TDeck_Pro.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+  +<helpers/ui/GxEPDDisplay.cpp>
+lib_deps =
+  ${LilyGo_TDeck_Pro.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  https://github.com/schreibfaul1/ESP32-audioI2S.git#2.0.6
+  bitbank2/JPEGDEC
+
+; 4G + BLE companion (4G modem hardware, no audio — GPIO conflict with PCM5102A)
+[env:meck_4g_ble]
 extends = LilyGo_TDeck_Pro
 build_flags =
   ${LilyGo_TDeck_Pro.build_flags}
@@ -126,21 +160,3 @@ build_src_filter = ${LilyGo_TDeck_Pro.build_src_filter}
 lib_deps =
   ${LilyGo_TDeck_Pro.lib_deps}
   densaugeo/base64 @ ~1.4.0
-
-[env:LilyGo_TDeck_Pro_repeater]
-extends = LilyGo_TDeck_Pro
-build_flags =
-  ${LilyGo_TDeck_Pro.build_flags}
-  -D ADVERT_NAME='"TDeck Pro Repeater"'
-  -D ADVERT_LAT=0.0
-  -D ADVERT_LON=0.0
-  -D ADMIN_PASSWORD='"password"'
-  -D MAX_NEIGHBOURS=50
-  -D NO_OTA=1
-build_src_filter = ${LilyGo_TDeck_Pro.build_src_filter}
-  +<../examples/simple_repeater>
-  +<helpers/ui/GxEPDDisplay.cpp>
-lib_deps =
-  ${LilyGo_TDeck_Pro.lib_deps}
-  me-no-dev/AsyncTCP @ ^1.1.1
-  me-no-dev/ESPAsyncWebServer @ ^1.2.3

variants/lilygo_tdeck_pro/target.cpp

@@ -17,7 +17,10 @@ ESP32RTCClock fallback_clock;
 AutoDiscoverRTCClock rtc_clock(fallback_clock);
 
 #if HAS_GPS
-  MicroNMEALocationProvider gps(Serial2, &rtc_clock);
+  // Wrap Serial2 with a sentence counter so the UI can show NMEA throughput.
+  // MicroNMEALocationProvider reads through this wrapper transparently.
+  GPSStreamCounter gpsStream(Serial2);
+  MicroNMEALocationProvider gps(gpsStream, &rtc_clock);
   EnvironmentSensorManager sensors(gps);
 #else
   SensorManager sensors;

variants/lilygo_tdeck_pro/target.h

@@ -18,6 +18,7 @@
 #if HAS_GPS
   #include "helpers/sensors/EnvironmentSensorManager.h"
   #include "helpers/sensors/MicroNMEALocationProvider.h"
+  #include "GPSStreamCounter.h"
 #else
   #include <helpers/SensorManager.h>
 #endif
@@ -27,6 +28,7 @@ extern WRAPPER_CLASS radio_driver;
 extern AutoDiscoverRTCClock rtc_clock;
 
 #if HAS_GPS
+  extern GPSStreamCounter gpsStream;
   extern EnvironmentSensorManager sensors;
 #else
   extern SensorManager sensors;