Frieder Schrempf
0f565323a0
variants: WisMesh Tag: Enable DC/DC regulator
...
According to the documentation and experiments on other boards using
NRF52 + SX1262 this reduces the power consumption significantly. This
assumes that the hardware actually has the inductor for the internal
DC/DC regulator populated which is very likely. Even if not, it won't
hurt.
Signed-off-by: Frieder Schrempf <frieder@fris.de >
2025-11-22 15:05:02 +01:00
Jaroslav Škarvada
07e7e2d44b
companion: Suspend radio when hibernating
...
This should significantly reduce power consumption in hibernation.
Fixes : #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com >
Signed-off-by: Frieder Schrempf <frieder@fris.de > # generalize for all radios and UIs
2025-11-22 15:05:01 +01:00
ripplebiz
5f06dc4a2f
Merge pull request #1133 from oltaco/repeater-adc-multiplier-setting
...
Feature: configurable adc.multiplier for repeaters
2025-11-22 14:50:23 +11:00
taco
fc93d84fb8
tweaks get/set adcMultiplier logic
2025-11-21 23:44:17 +11:00
taco
e13c064487
add board.setAdcMultiplier to room server and sensor
2025-11-21 21:46:55 +11:00
ripplebiz
fc68203275
Merge pull request #1127 from oltaco/rename-faketec-to-promicro
...
Rename Faketec to ProMicro
2025-11-21 19:40:31 +11:00
taco
5a3ea64a97
Repeater: add adc.multiplier setting
2025-11-21 18:15:30 +11:00
taco
454f6b2583
rename adverts
2025-11-21 17:57:49 +11:00
Winston Lowe
031fa1e704
Changed uint to a uint8_t
2025-11-20 21:58:42 -08:00
Scott Powell
b33d226c58
* proposal for 'Extended Trace' packets. Using 'flags' byte, lower 2 bits, for path hash size.
2025-11-21 15:44:31 +11:00
zaquaz
2bd47de3b9
Added buzzer config persistance accross restart
2025-11-20 19:02:32 -08:00
taco
ed9655e14e
rename faketec to promicro
2025-11-21 12:48:33 +11:00
ripplebiz
f5a56c537f
Merge pull request #1113 from recrof/bme280_fix
...
fix: make bme280 sensor usable again
2025-11-19 15:39:48 +11:00
Quency-D
310618e689
add heltec_v4 tft expansion box
2025-11-19 11:43:52 +08:00
recrof
88a6141943
fix: move bme680 detection before bme280
2025-11-18 15:36:25 +01:00
agessaman
a3c9a07377
Modify CMD_GET_STATS with sub-types for core, radio, and packet statistics. Consolidated to a single RESP_CODE_STATS with a second byte to identify response structure. Updated documentation and examples to reflect the new command structure and response parsing.
2025-11-17 09:57:36 -08:00
ripplebiz
459169e8cb
Merge pull request #1092 from liquidraver/rakgps
...
Fix RAK4631 GPS UART pin macros for L76K to work
2025-11-17 14:04:09 +11:00
ripplebiz
caf421b591
Merge pull request #1106 from oltaco/keepteen-lt1
...
Add support for Keepteen LT1
2025-11-17 13:50:16 +11:00
Florent
838e83b3b5
xiao_s3: relocate serial pins on repeater_bridge_rs232
...
* conflicts with i2c pins that are documented on the same pins
* this is a commented target
2025-11-16 17:07:33 +01:00
Florent
3dd6dc02ea
xiao_s3: use environment sensor manager and add sensor role
2025-11-16 16:55:16 +01:00
taco
bc2256f232
Keepteen LT1: remove terminal_chat and sensor targets
2025-11-16 16:17:11 +11:00
taco
2058af8453
initial support: Keepteen LT1
2025-11-16 15:55:49 +11:00
zach
850d57a8f2
Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web
...
REPO:
1. Flash a repeater
2. Connect over lora
3. Set bw to 42.7 KHZ
It will revert back due to converting a double to a float.
REPO2:
1.Flash Repeater
2. Apply float fix
3. Set to say 20.8
4. try to get value via app or web cli repeater config
It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float
2025-11-14 21:51:28 -07:00
ripplebiz
8dbb0f5f23
Merge pull request #1071 from tpp-at-idx/thinknode_m2
...
Thinknode_M2: better battery reading accuracy and no display on powerup fix
2025-11-14 15:11:06 +11:00
ripplebiz
ff67c786ef
Merge pull request #985 from liquidraver/dev3
...
Fix reversed GPS PINs on G2 and enable timesync
2025-11-14 14:34:23 +11:00
ripplebiz
11a0bd6ef1
Merge pull request #1035 from liquidraver/devt114
...
Add Heltec T114 GPS + timesync
2025-11-14 14:33:05 +11:00
Liam Cottle
9bfbb777a1
Merge pull request #1100 from stphnrdmr/dev
...
Allow SF smaller than 7 to be saved
2025-11-14 12:15:10 +13:00
Stephan Rodemeier
16c294ce60
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
Brad Ferguson
15d52a6e27
Merge branch 'meshcore-dev:dev' into dev
2025-11-13 14:52:02 -06:00
Scott Powell
91e9fcea4b
* ver 1.10.0
2025-11-13 20:45:38 +11:00
fdlamotte
750e955f19
Update library.json to latest libs and version
2025-11-13 10:39:20 +01:00
ripplebiz
a5cdc88fe2
Merge pull request #1064 from recrof/esp_contacts_350_channels_40
...
set max contacts to 350 and channels to 40 for esp32c3, s3 and c6
2025-11-12 00:49:05 +11:00
ripplebiz
ba6b8535c9
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
liquidraver
b0ce00652f
Fix RAK4631 GPS UART pin macros
2025-11-11 13:00:27 +01:00
Florent
90e26129ee
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
b59d1999e6
* Sensor: DISCOVER_REQ, prefix_only support
2025-11-11 20:08:05 +11:00
ripplebiz
74f136ba7a
Merge pull request #1068 from fdlamotte/sensor_control_data
...
sensor: copy control data code from repeater
2025-11-11 20:03:33 +11:00
agessaman
39f83efbfe
Remove unused statistics formatting methods and associated header includes from MyMesh class. Whoops.
2025-11-09 11:39:47 -08:00
agessaman
80d6dd4367
Update statistics handling to use binary frames instead of JSON formatting for consistency with other companion commands. Added documentation of frame structure with code examples.
2025-11-09 11:28:49 -08:00
agessaman
c9aa536ca6
Reverted MyMesh constructor for simplicity.
...
Updated formatStatsReply method to use new member variables for statistics handling.
Removed excess variable creation
2025-11-09 11:28:49 -08:00
agessaman
df4dab8509
Add statistics commands and response handling in MyMesh
...
- Introduced new commands for retrieving statistics: CMD_GET_STATS_CORE, CMD_GET_STATS_RADIO, and CMD_GET_STATS_PACKETS.
- Implemented corresponding response handling methods to format and send statistics data.
- Updated MyMesh constructor to initialize new member variables for managing statistics.
- Included StatsFormatHelper for formatting statistics replies.
2025-11-09 11:28:49 -08:00
Scott Powell
ab0721d6df
* fix: repeater and room server telemetry requests now return all telemetry for _READ & _WRITE ACL permissions.
2025-11-09 16:36:23 +11:00
Scott Powell
b31d3e7b5f
* added StrHelper::fromHex()
2025-11-09 16:17:49 +11:00
brad
00e0635ab5
add variant files for ikoka handheld (nrf52 with e22 radio)
2025-11-08 20:05:46 -06:00
Tomas P
a0bf66f9d8
Fix for display not coming on after poweron
2025-11-07 09:50:21 +01:00
Tomas P
429f82106b
tweak getBattMilliVolts to report battery more accurately
2025-11-07 09:48:57 +01:00
Tomas P
c0a51aff66
change ADC_MULTIPLIER to better reflect battery voltage
2025-11-07 09:47:18 +01:00
Scott Powell
1520f4d28e
* repeater, DISCOVER_REQ, flags lowest bit now for 'prefix_only' responses
2025-11-07 19:31:09 +11:00
Scott Powell
62d7ce110b
* packet format docs updated
2025-11-07 15:49:01 +11:00
Scott Powell
28b90c18cf
Merge branch 'transportcodes' into dev
2025-11-07 14:52:11 +11:00
