iarv/LoraSA
1
0
Fork 0
mirror of https://github.com/Genaker/LoraSA.git synced 2026-03-28 17:42:59 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
ca28d3a3793f1079a97de1ed66720295deedbebf
LoraSA/src/main.cpp
Egor ca28d3a379 add 80
2025-01-05 15:43:25 -08:00

2408 lines
68 KiB
C++
Raw Blame History

/**
RadioLib SX126x Spectrum Scan
This code perform a spectrum power scan using SX126x.
The output is in the form of scan lines, each line has 33 power bins.
First power bin corresponds to -11 dBm, the second to -15 dBm and so on.
Higher number of samples in a bin corresponds to more power received
at that level.
To show the results in a plot, run the Python script
RadioLib/extras/SX126x_Spectrum_Scan/SpectrumScan.py
WARNING: This functionality is experimental and requires a binary patch
to be uploaded to the SX126x device. There may be some undocumented
side effects!
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
For full API reference, see the GitHub Pages
https://jgromes.github.io/RadioLib/
*/
// #define HELTEC_NO_DISPLAY
#include "FS.h"
#include <Arduino.h>
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <File.h>
#include <LittleFS.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <unordered_map>
#include "WIFI_SERVER.h"
#define FORMAT_LITTLEFS_IF_FAILED true
// HardwareSerial Serial0(0);
// #define OSD_ENABLED true
// #define WIFI_SCANNING_ENABLED true
// #define BT_SCANNING_ENABLED true
// Direct access to the low-level SPI communication between RadioLib and the radio module.
#define RADIOLIB_LOW_LEVEL (1)
// In this mode, all methods and member variables of all RadioLib classes will be made
// public and so will be exposed to the user. This allows direct manipulation of the
// library internals.
#define RADIOLIB_GODMODE (1)
#define RADIOLIB_CHECK_PARAMS (0)
#include <charts.h>
#include <comms.h>
#include <config.h>
#include <events.h>
#include <scan.h>
#include <stdlib.h>
#ifndef LILYGO
#include <heltec_unofficial.h>
// This file contains a binary patch for the SX1262
#include "modules/SX126x/patches/SX126x_patch_scan.h"
#endif // end ifndef LILYGO
#if defined(LILYGO)
// LiLyGO device does not support the auto download mode, you need to get into the
// download mode manually. To do so, press and hold the BOOT button and then press the
// RESET button once. After that release the BOOT button. Or OFF->ON together with BOOT
// Default LilyGO code
#include <LoRaBoards.h>
// #include "utilities.h"
// Our Code
#include <LiLyGo.h>
#endif // end LILYGO
#define BT_SCAN_DELAY 60 * 1 * 1000
#define WF_SCAN_DELAY 60 * 2 * 1000
long noDevicesMillis = 0, cycleCnt = 0;
bool present = false;
bool scanFinished = true;
bool radioIsScan = false;
// time to scan BT
#define BT_SCAN_TIME 10
uint64_t wf_start = 0;
uint64_t bt_start = 0;
#define MAX_POWER_LEVELS 33
unsigned int osdCyclesCount = 0;
#define OSD_MAX_CLEAR_CYCLES 10
#ifdef OSD_ENABLED
#include "DFRobot_OSD.h"
#define SIDEBAR_START_COL 2
#define SIDEBAR_END_COL 10
// #define SIDEBAR_ACCENT_ONLY 1
#define SIDEBAR_DB_LEVEL 80 // Absolute value without minus
#define SIDEBAR_DB_DELTA 2 // detect changes <> threshold
// SPI pins
#define OSD_CS 47
#define OSD_MISO 33
#define OSD_MOSI 34
#define OSD_SCK 26
#endif
#define OSD_WIDTH 30
#define OSD_HEIGHT 16
#define OSD_CHART_WIDTH 15
#define OSD_CHART_HEIGHT 5
#define OSD_X_START 1
#define OSD_Y_START 16
// TODO: Calculate dynamically:
// osd_steps = osd_mhz_in_bin / (FM range / LORA radio x Steps)
int osd_mhz_in_bin = 5;
int osd_steps = 12;
int global_counter = 0;
#ifdef OSD_ENABLED
DFRobot_OSD osd(OSD_CS);
#endif
#include "global_config.h"
#include "ui.h"
// -----------------------------------------------------------------
// CONFIGURATION OPTIONS
// -----------------------------------------------------------------
typedef enum
{
METHOD_RSSI = 0u,
METHOD_SPECTRAL
} TSCAN_METOD_ENUM;
// #define SCAN_METHOD METHOD_SPECTRAL
#define SCAN_METHOD
// #define METHOD_SPECTRAL // Spectral scan method
#define METHOD_RSSI // Uncomment this and comment METHOD_SPECTRAL fot RSSI
// Output Pixel Formula
// 1 = rssi / 4, 2 = (rssi / 2) - 22 or 20
// constexpr int RSSI_OUTPUT_FORMULA = 2;
// Feature to scan diapasones. Other frequency settings will be ignored.
// String SCAN_RANGES = String("850..890,920..950");
String SCAN_RANGES = "";
std::unordered_map<int, bool> ignoredFreq = {/*{916, true}, {915, true}*/};
size_t scan_pages_sz = 0;
ScanPage *scan_pages;
size_t scan_page = 0;
// MHZ per page
// to put everything into one page set RANGE_PER_PAGE = FREQ_END - 800
uint64_t RANGE_PER_PAGE; // FREQ_END - CONF_FREQ_BEGIN
uint64_t CONF_FREQ_END, CONF_FREQ_BEGIN; // To Enable Multi Screen scan
// uint64_t RANGE_PER_PAGE = 50;
// Default Range on Menu Button Switch
// multiplies STEPS * N to increase scan resolution.
#define SCAN_RBW_FACTOR 2
#ifdef USING_SX1280PA
#define SCAN_RBW_FACTOR 2
#endif
constexpr int OSD_PIXELS_PER_CHAR = (STEPS * SCAN_RBW_FACTOR) / OSD_CHART_WIDTH;
#define DEFAULT_RANGE_PER_PAGE 50
// Print spectrum values pixels at once or by line
bool ANIMATED_RELOAD = false;
// TODO: Ignore max power lines
#define UP_FILTER 5
// Trim low signals - nose level
#define START_LOW 6
#define FILTER_SAMPLES_MIN
constexpr bool DRAW_DETECTION_TICKS = true;
int16_t max_x_rssi[STEPS] = {999};
int16_t max_x_window[STEPS / 14] = {999};
int x_window = 0;
constexpr int WINDOW_SIZE = 15;
// Number of samples for each frequency scan. Fewer samples = better temporal resolution.
// if more than 100 it can freeze
#define SAMPLES 35 //(scan time = 1294)
uint64_t RANGE, range, iterations, median_frequency;
float SINGLE_STEP;
// #define DISABLE_PLOT_CHART false // unused
// Array to store the scan results
uint16_t result[RADIOLIB_SX126X_SPECTRAL_SCAN_RES_SIZE];
bool filtered_result[RADIOLIB_SX126X_SPECTRAL_SCAN_RES_SIZE];
int max_bins_array_value[MAX_POWER_LEVELS];
std::unordered_map<int, int> prevDBvalue;
int max_step_range = 32;
bool detected_y[STEPS]; // 20 - ??? steps
// global variable
// Used as a Led Light and Buzzer/count trigger
bool first_run, new_pixel, detected_x = false;
uint64_t drone_detection_level = DEFAULT_DRONE_DETECTION_LEVEL;
#define TRIGGER_LEVEL -80.0
uint64_t drone_detected_frequency_start = 0;
uint64_t drone_detected_frequency_end = 0;
bool single_page_scan = false;
// #define PRINT_DEBUG
#define PRINT_PROFILE_TIME
#ifdef PRINT_PROFILE_TIME
uint64_t loop_start = 0;
uint64_t loop_time = 0;
uint64_t scan_time = 0;
uint64_t scan_start_time = 0;
#endif
// log data via serial console, JSON format:
// Optionally it can be enabled via this flag, although its recommended to use
// platformio config flag -DLOG_DATA_JSON
// #define LOG_DATA_JSON true
#ifdef SEEK_ON_X
#define SERIAL_PORT 1
HardwareSerial SerialPort(SERIAL_PORT);
#endif
// #define WEB_SERVER true
uint64_t x, y, w = WATERFALL_START, i = 0;
int osd_x = 1, osd_y = 2, col = 0, max_bin = 32;
int rssi = 0;
int state = 0;
int CONF_SAMPLES;
#ifdef METHOD_SPECTRAL
int samples = SAMPLES;
#endif
#ifdef METHOD_RSSI
int samples = SAMPLES_RSSI;
#endif
uint8_t result_index = 0;
uint8_t button_pressed_counter = 0;
#ifndef LILYGO
// #define JOYSTICK_ENABLED
#endif
#include "joyStick.h"
// project components
#if (defined(WIFI_SCANNING_ENABLED) || defined(BT_SCANNING_ENABLED)) && \
defined(OSD_ENABLED)
#include "BT_WIFI_scan.h"
#endif
#if defined(WIFI_SCANNING_ENABLED) && defined(OSD_ENABLED)
scanWiFi(osd)
#endif
#if defined(BT_SCANNING_ENABLED) && defined(OSD_ENABLED)
scanBT(osd)
#endif
#ifdef OSD_ENABLED
unsigned short selectFreqChar(int bin, int start_level = 0)
{
if (bin >= start_level)
{
// level when we are starting show levels symbols
// you can override with your own character for example 0x100 = " " empty char
return power_level[33];
}
else if (bin >= 0 && bin < MAX_POWER_LEVELS)
return power_level[bin];
// when wrong bin number or noc har assigned we are showing "!" char
return 0x121;
}
void osdPrintSignalLevelChart(int col, int signal_value)
{
// Third line
if (signal_value <= 9 && signal_value <= drone_detection_level)
{
osd.displayChar(13, col + 2, 0x100);
osd.displayChar(14, col + 2, 0x100);
osd.displayChar(12, col + 2, selectFreqChar(signal_value, drone_detection_level));
}
// Second line
else if (signal_value < 19 && signal_value <= drone_detection_level)
{
osd.displayChar(12, col + 2, 0x100);
osd.displayChar(14, col + 2, 0x100);
osd.displayChar(13, col + 2, selectFreqChar(signal_value, drone_detection_level));
}
// First line
else
{
// Clean Up symbol
osd.displayChar(12, col + 2, 0x100);
osd.displayChar(13, col + 2, 0x100);
osd.displayChar(14, col + 2, selectFreqChar(signal_value, drone_detection_level));
}
}
// Start Sidebar
int sideBarCol = SIDEBAR_START_COL;
std::unordered_map<int, bool> accentFreq = {{950, true}, {915, true}};
void osdProcess()
{ // OSD enabled
osdCyclesCount++;
// memset(max_step_range, 33, 30);
max_bin = 32;
osd.displayString(12, 1, String(CONF_FREQ_BEGIN));
osd.displayString(12, OSD_WIDTH - 8, String(CONF_FREQ_END));
// Finding biggest in result
// Skiping 0 and 32 31 to avoid overflow
for (int i = 1; i < MAX_POWER_LEVELS - 3; i++)
{
// filter
if (result[i] > 0
#if FILTER_SPECTRUM_RESULTS
&& ((result[i + 1] != 0 /*&& result[i + 2] != 0*/) || result[i - 1] != 0)
#endif
)
{
max_bin = i;
#ifdef PRINT_DEBUG
Serial.print("MAX in bin:" + String(max_bin));
Serial.println();
#endif
break;
}
}
// max_bin contains fist not 0 index of the bin
if (max_step_range > max_bin && max_bin != 0)
{
max_step_range = max_bin;
// Store RSSI value for RSSI Method
#ifdef METHOD_RSSI
max_step_range = result[max_bin];
#endif
}
// Going to the next OSD step
if (x % osd_steps == 0 && col < OSD_WIDTH)
{
// OSD SIDE BAR with frequency log
#ifdef OSD_SIDE_BAR
{
#ifndef METHOD_RSSI
if (max_step_range < 16)
{
osd.displayString(sideBarCol++, OSD_WIDTH - 7,
String(CONF_FREQ_BEGIN + (col * osd_mhz_in_bin)) + "-" +
String(max_step_range) + " ");
}
#endif
#ifdef METHOD_RSSI
String noChangeChar = "=";
String upChar = ">";
String downChar = "<";
String printChar = "-";
int freqOSD = CONF_FREQ_BEGIN + (col * osd_mhz_in_bin);
String freqOSDString = "";
if ((
// Show defined freq only
#ifndef SIDEBAR_ACCENT_ONLY
max_step_range <= SIDEBAR_DB_LEVEL
#else
false
#endif
|| accentFreq[freqOSD] == true) &&
max_step_range > 0)
{
if (prevDBvalue[freqOSD] != 0 &&
// 80 - 90
prevDBvalue[freqOSD] - max_step_range < -SIDEBAR_DB_DELTA)
{
printChar = upChar;
}
else if (prevDBvalue[freqOSD] != 0 &&
// 90 - 80
prevDBvalue[freqOSD] - max_step_range > SIDEBAR_DB_DELTA)
{
printChar = downChar;
}
else if (prevDBvalue[freqOSD] != 0 &&
// 90 - 92 && 90 - 88
abs(prevDBvalue[freqOSD] - max_step_range) < SIDEBAR_DB_DELTA)
{
printChar = noChangeChar;
}
else
{
printChar = printChar;
}
if (true || sideBarCol == SIDEBAR_START_COL || freqOSD % 100 == 0)
{
freqOSDString = String(freqOSD);
}
else
{
freqOSDString = String(" ") + String(freqOSD).substring(1);
}
long int osd_start = millis();
osd.displayString(sideBarCol++, OSD_WIDTH - 7,
freqOSDString + printChar + String(max_step_range) +
" ");
long int osd_end = millis();
// Serial.println("Time of EXecution: " + String((osd_end - osd_start)));
prevDBvalue[freqOSD] = max_step_range;
}
else
{
// erase values without previous every N of the OSD cycle
if (osdCyclesCount >= OSD_MAX_CLEAR_CYCLES)
{
prevDBvalue[freqOSD] = 0;
// Clear sidebar 3 first values always on screen
for (int i = sideBarCol + 3; i <= SIDEBAR_END_COL; i++)
{
osd.displayString(i++, OSD_WIDTH - 7, String(" "));
}
osdCyclesCount = 0;
}
}
// MAx down sidebar
if (sideBarCol >= SIDEBAR_END_COL)
{
sideBarCol = SIDEBAR_START_COL;
}
#endif
}
#endif
// Test with Random Result...
// max_step_range = rand() % 32;
#ifdef METHOD_RSSI
// With THe RSSI method we can get real RSSI value not just a bin
#endif
// PRINT SIGNAL CHAR ROW, COL, VALUE
osdPrintSignalLevelChart(col, max_step_range);
#ifdef PRINT_DEBUG
Serial.println("MAX:" + String(max_step_range));
#endif
max_step_range = 32;
col++;
}
if (osdCyclesCount >= OSD_MAX_CLEAR_CYCLES)
{
osdCyclesCount = 0;
}
}
#endif
Config config;
float getRSSI(void *param)
{
Scan *r = (Scan *)param;
#if defined(USING_SX1280PA)
// radio.startReceive();
// get instantaneous RSSI value
// When PR will be merged we can use radi.getRSSI(false);
uint8_t data[3] = {0, 0, 0}; // RssiInst, Status, RFU
radio.mod->SPIreadStream(RADIOLIB_SX128X_CMD_GET_RSSI_INST, data, 3);
return ((float)data[0] / (-2.0));
#elif defined(USING_LR1121)
// Try getRssiInst
float rssi;
radio.getRssiInst(&rssi);
// pass the replies
return rssi;
#else
return radio.getRSSI(false);
#endif
}
float getCAD(void *param)
{
Scan *r = (Scan *)param;
int16_t err = radio.scanChannel();
if (err != RADIOLIB_ERR_NONE)
{
return -999;
}
#ifdef USING_LR1121
// LR1121 doesn't implement getRSSI(bool), getRSSI always
// returns RSSI of the last packet
return radio.getRSSI();
#else
return radio.getRSSI(true);
#endif
}
Scan r;
#define WATERFALL_SENSITIVITY 0.05
DecoratedBarChart *bar;
WaterfallChart *waterChart;
StackedChart stacked(display, 0, 0, 0, 0);
UptimeClock *uptime;
int16_t initForScan(float freq)
{
int16_t state;
#if defined(USING_SX1280PA)
state = radio.beginGFSK(freq);
#elif defined(USING_LR1121)
state = radio.beginGFSK(freq, 4.8F, 5.0F, 156.2F, 10, 16U, 1.7F);
#else
state = radio.beginFSK(freq);
#endif
return state;
}
bool setFrequency(float curr_freq)
{
r.current_frequency = curr_freq;
LOG("setFrequency:%f\n", r.current_frequency);
int16_t state;
#ifdef USING_SX1280PA
int16_t state1 =
radio.setFrequency(r.current_frequency); // 1280 doesn't have calibration
state = radio.startReceive(RADIOLIB_SX128X_RX_TIMEOUT_INF);
if (state != RADIOLIB_ERR_NONE)
{
Serial.println("Error:startReceive:" + String(state));
}
state = state1;
#elif USING_SX1276
state = radio.setFrequency(freq);
#else
state = radio.setFrequency(r.current_frequency,
true); // false = calibration is needed here
#endif
if (state != RADIOLIB_ERR_NONE)
{
display.drawString(0, 64 - 10,
"E(" + String(state) +
"):setFrequency:" + String(r.current_frequency));
Serial.println("E(" + String(state) +
"):setFrequency:" + String(r.current_frequency));
display.display();
delay(2);
return false;
}
return true;
}
void init_radio()
{
// initialize SX1262 FSK modem at the initial frequency
both.println("Init radio");
state = initForScan(CONF_FREQ_BEGIN);
if (state == RADIOLIB_ERR_NONE)
{
radioIsScan = true;
Serial.println(F("success!"));
}
else
{
display.println("Error:" + String(state));
Serial.print(F("failed, code "));
Serial.println(state);
while (true)
{
delay(5);
}
}
#ifdef METHOD_SPECTRAL
// upload a patch to the SX1262 to enable spectral scan
// NOTE: this patch is uploaded into volatile memory,
// and must be re-uploaded on every power up
both.println("Upload SX1262 patch");
// Upload binary patch into the SX126x device RAM. Patch is needed to e.g.,
// enable spectral scan and must be uploaded again on every power cycle.
RADIOLIB_OR_HALT(radio.uploadPatch(sx126x_patch_scan, sizeof(sx126x_patch_scan)));
// configure scan bandwidth and disable the data shaping
#endif
both.println("Setting up radio");
#ifdef USING_SX1280PA
// RADIOLIB_OR_HALT(radio.setBandwidth(RADIOLIB_SX128X_LORA_BW_406_25));
#elif USING_SX1276
// Receiver bandwidth in kHz. Allowed values
// are 2.6, 3.1, 3.9, 5.2, 6.3, 7.8, 10.4, 12.5, 15.6, 20.8, 25, 31.3, 41.7,
// 50, 62.5, 83.3, 100, 125, 166.7, 200 and 250 kHz.
RADIOLIB_OR_HALT(radio.setRxBandwidth(250));
#else
RADIOLIB_OR_HALT(radio.setRxBandwidth(BANDWIDTH));
#endif
// and disable the data shaping
state = radio.setDataShaping(RADIOLIB_SHAPING_NONE);
if (state != RADIOLIB_ERR_NONE)
{
Serial.println("Error:setDataShaping:" + String(state));
}
both.println("Starting scanning...");
// calibrate only once ,,, at startup
// TODO: check documentation (9.2.1) if we must calibrate in certain ranges
setFrequency(CONF_FREQ_BEGIN);
delay(50);
}
struct frequency_scan_result
{
uint64_t begin;
uint64_t end;
uint64_t last_epoch;
int16_t rssi; // deliberately not a float; floats can pin task to wrong core forever
ScanTaskResult dump;
size_t readings_sz;
} frequency_scan_result;
TaskHandle_t logToSerial = NULL;
TaskHandle_t dumpToComms = NULL;
void eventListenerForReport(void *arg, Event &e)
{
if (e.type == EventType::DETECTED)
{
if (e.epoch != frequency_scan_result.last_epoch)
{
frequency_scan_result.dump.sz = 0;
}
if (frequency_scan_result.dump.sz >= frequency_scan_result.readings_sz)
{
size_t old_sz = frequency_scan_result.readings_sz;
frequency_scan_result.readings_sz = frequency_scan_result.dump.sz + 1;
uint32_t *f = new uint32_t[frequency_scan_result.readings_sz];
int16_t *r = new int16_t[frequency_scan_result.readings_sz];
if (old_sz > 0)
{
memcpy(f, frequency_scan_result.dump.freqs_khz,
old_sz * sizeof(uint32_t));
memcpy(r, frequency_scan_result.dump.rssis, old_sz * sizeof(int16_t));
delete[] frequency_scan_result.dump.freqs_khz;
delete[] frequency_scan_result.dump.rssis;
}
frequency_scan_result.dump.freqs_khz = f;
frequency_scan_result.dump.rssis = r;
}
frequency_scan_result.dump.freqs_khz[frequency_scan_result.dump.sz] =
e.detected.freq * 1000; // convert to kHz
frequency_scan_result.dump.rssis[frequency_scan_result.dump.sz] =
max(e.detected.rssi, -999.0f);
frequency_scan_result.dump.sz++;
if (e.epoch != frequency_scan_result.last_epoch ||
e.detected.rssi > frequency_scan_result.rssi)
{
frequency_scan_result.last_epoch = e.epoch;
frequency_scan_result.rssi = e.detected.rssi;
}
return;
}
if (e.type == EventType::SCAN_TASK_COMPLETE)
{
// notify async communication that the data is ready
if (logToSerial != NULL)
{
xTaskNotifyGive(logToSerial);
}
if (dumpToComms != NULL)
{
xTaskNotifyGive(dumpToComms);
}
return;
}
}
ScanTask report_scans = ScanTask{
count : 0, // 0 => report none; < 0 => report forever; > 0 => report that many
delay : 0 // 0 => as and when it happens; > 0 => at least once that many ms
};
bool requested_host = true;
void dumpToCommsTask(void *parameter)
{
uint64_t last_epoch = frequency_scan_result.last_epoch;
for (;;)
{
int64_t delay = report_scans.delay;
if (delay == 0)
{
delay = (1ull << 63) - 1;
}
ulTaskNotifyTake(true, pdMS_TO_TICKS(delay));
if (report_scans.count == 0 || frequency_scan_result.last_epoch == last_epoch)
{
continue;
}
if (report_scans.count > 0)
{
report_scans.count--;
}
Message m;
m.type = MessageType::SCAN_RESULT;
m.payload.dump = frequency_scan_result.dump;
if (requested_host)
{
HostComms->send(m);
}
else
{
if (Comms0 != NULL)
Comms0->send(m);
if (Comms1 != NULL)
Comms1->send(m);
}
m.payload.dump.sz =
0; // dump is shared, so should not delete arrays in destructor
}
}
#ifdef LOG_DATA_JSON
void logToSerialTask(void *parameter)
{
uint64_t last_epoch = frequency_scan_result.last_epoch;
frequency_scan_result.rssi = -999;
for (;;)
{
ulTaskNotifyTake(true, pdMS_TO_TICKS(config.log_data_json_interval));
if (frequency_scan_result.begin != frequency_scan_result.end ||
frequency_scan_result.last_epoch != last_epoch)
{
int16_t highest_value_scanned = frequency_scan_result.rssi;
frequency_scan_result.rssi = -999;
last_epoch = frequency_scan_result.last_epoch;
if (highest_value_scanned == -999)
{
continue;
}
#ifdef SEEK_ON_X
SerialPort.printf("{\"low_range_freq\": %" PRIu64
", \"high_range_freq\": %" PRIu64 ", "
"\"value\": \"%" PRIi16 "\"}\n",
frequency_scan_result.begin, frequency_scan_result.end,
highest_value_scanned);
#else
Serial.printf("{\"low_range_freq\": %" PRIu64
", \"high_range_freq\": %" PRIu64 ", "
"\"value\": \"%" PRIi16 "\"}\n",
frequency_scan_result.begin, frequency_scan_result.end,
highest_value_scanned);
#endif
}
}
}
#endif
void drone_sound_alarm(void *arg, Event &e);
void configurePages()
{
if (scan_pages_sz > 0)
delete[] scan_pages;
if (single_page_scan)
{
scan_pages_sz = 1;
ScanPage scan_page = {
start_mhz : CONF_FREQ_BEGIN,
end_mhz : CONF_FREQ_END,
page_sz : config.scan_ranges_sz
};
if (scan_page.page_sz > 0)
{
scan_page.scan_ranges = new ScanRange[scan_page.page_sz];
}
for (int i = 0; i < scan_page.page_sz; i++)
{
scan_page.scan_ranges[i] = config.scan_ranges[i];
}
scan_pages = new ScanPage[1]{scan_page};
scan_page.page_sz =
0; // make sure it doesn't free up the Scanranges that were just constructed
}
else
{
scan_pages_sz =
(CONF_FREQ_END - CONF_FREQ_BEGIN + RANGE_PER_PAGE - 1) / RANGE_PER_PAGE;
scan_pages = new ScanPage[scan_pages_sz];
for (int j = 0; j < scan_pages_sz; j++)
{
ScanPage scan_page = {
start_mhz : CONF_FREQ_BEGIN + j * RANGE_PER_PAGE,
end_mhz : CONF_FREQ_BEGIN + (j + 1) * RANGE_PER_PAGE,
page_sz : 0
};
for (int i = 0; i < config.scan_ranges_sz; i++)
{
if (config.scan_ranges[i].start_khz > scan_page.end_mhz * 1000 ||
config.scan_ranges[i].end_khz < scan_page.start_mhz * 1000)
{
continue;
}
scan_page.page_sz++;
}
if (scan_page.page_sz > 0)
{
scan_page.scan_ranges = new ScanRange[scan_page.page_sz];
for (int i = 0, r = 0; i < config.scan_ranges_sz; i++)
{
if (config.scan_ranges[i].start_khz > scan_page.end_mhz * 1000 ||
config.scan_ranges[i].end_khz < scan_page.start_mhz * 1000)
{
continue;
}
scan_page.scan_ranges[r] = {
start_khz : max(config.scan_ranges[i].start_khz,
scan_page.start_mhz * 1000),
end_khz :
min(config.scan_ranges[i].end_khz, scan_page.end_mhz * 1000),
step_khz : config.scan_ranges[i].step_khz
};
r++;
}
}
scan_pages[j] = scan_page;
scan_page.page_sz =
0; // we copied over the values, make sure the array doesn't get freed
}
}
}
void configureDetection()
{
if (config.scan_ranges_sz == 0)
{
if (config.detection_strategy.equalsIgnoreCase("RSSI_MAX"))
{
size_t sz = 10;
uint32_t f_khz = FREQ_BEGIN * 1000;
uint32_t ssz = (FREQ_END - FREQ_BEGIN) * 1000 / 10;
uint32_t step =
(float)(FREQ_END - FREQ_BEGIN) * 1000 / (STEPS * SCAN_RBW_FACTOR);
uint32_t rx_b = FREQ_END * 1000 + 100000;
uint32_t rx_e = rx_b + 500;
if (RxComms != NULL)
{
rx_e = RxComms->loraCfg.bw;
rx_b = RxComms->loraCfg.freq * 1000 - rx_e;
rx_e = rx_b + 2 * rx_e;
if (rx_e / ssz == rx_b / ssz && rx_e > f_khz && rx_b < FREQ_END * 1000)
{
// entire exclusion range is in one bucket
sz++;
}
}
config.scan_ranges_sz = sz;
config.scan_ranges = new ScanRange[sz];
for (int i = 0; i < sz; i++)
{
config.scan_ranges[i].step_khz = step;
config.scan_ranges[i].start_khz = f_khz > rx_b ? max(f_khz, rx_e) : f_khz;
bool starts_before = f_khz < rx_e;
bool ends_after = f_khz + ssz > rx_b;
if (starts_before && ends_after)
{
config.scan_ranges[i].end_khz = rx_b;
i++;
config.scan_ranges[i].start_khz = rx_e;
config.scan_ranges[i].step_khz = step;
}
f_khz += ssz;
config.scan_ranges[i].end_khz =
f_khz - step < rx_e ? min(f_khz - step, rx_b) : f_khz - step;
}
if (config.scan_ranges[sz - 1].end_khz > rx_e)
config.scan_ranges[sz - 1].end_khz = FREQ_END * 1000;
}
else
{
config.scan_ranges_sz = 1;
config.scan_ranges = new ScanRange[1];
config.scan_ranges[0].start_khz = FREQ_BEGIN * 1000;
config.scan_ranges[0].end_khz = FREQ_END * 1000;
config.scan_ranges[0].step_khz =
(float)(FREQ_END - FREQ_BEGIN) * 1000 / (STEPS * SCAN_RBW_FACTOR);
}
}
if (config.samples <= 0)
{
config.samples = SAMPLES_RSSI;
}
CONF_SAMPLES = config.samples;
CONF_FREQ_BEGIN = config.scan_ranges[0].start_khz / 1000;
CONF_FREQ_END = config.scan_ranges[0].end_khz / 1000;
for (int i = 1; i < config.scan_ranges_sz; i++)
{
CONF_FREQ_BEGIN = min(CONF_FREQ_BEGIN, config.scan_ranges[i].start_khz / 1000);
CONF_FREQ_END = max(CONF_FREQ_END, config.scan_ranges[i].end_khz / 1000);
}
median_frequency = (CONF_FREQ_BEGIN + CONF_FREQ_END) / 2;
samples = CONF_SAMPLES;
RANGE_PER_PAGE = CONF_FREQ_END - CONF_FREQ_BEGIN; // FREQ_END - CONF_FREQ_BEGIN
RANGE = (int)(CONF_FREQ_END - CONF_FREQ_BEGIN);
range = RANGE;
configurePages();
if (bar != NULL)
{
bar->bar.min_x = CONF_FREQ_BEGIN;
bar->bar.max_x = CONF_FREQ_END;
}
}
void readConfigFile()
{
// writeFile(LittleFS, "/text.txt", "{WIFI:{name:\"sdfsdf\",
// Password:\"sdfsdf\"}");
ssid = readParameterFromParameterFile(SSID);
Serial.println("SSID: " + ssid);
pass = readParameterFromParameterFile(PASS);
Serial.println("PASS: " + pass);
ip = readParameterFromParameterFile(IP);
Serial.println("PASS: " + ip);
gateway = readParameterFromParameterFile(GATEWAY);
Serial.println("GATEWAY: " + gateway);
fstart = readParameterFromParameterFile(FSTART);
Serial.println("FSTART: " + fstart);
fend = readParameterFromParameterFile(FEND);
Serial.println("FEND: " + fend);
smpls = readParameterFromParameterFile("samples");
Serial.println("SAMPLES: " + smpls);
String detection = String("RSSI");
if (smpls.length() > 0)
detection += "," + smpls;
if (fstart.length() == 0)
fstart = String(FREQ_BEGIN * 1000);
if (fend.length() == 0)
fend = String(FREQ_END * 1000);
detection += ":" + fstart + ".." + fend + "/" + String(STEPS * SCAN_RBW_FACTOR);
config.configureDetectionStrategy(detection);
configureDetection();
both.println("C FREQ BEGIN:" + String(CONF_FREQ_BEGIN));
both.println("C FREQ END:" + String(CONF_FREQ_END));
both.println("C SAMPLES:" + String(CONF_SAMPLES));
}
void setup(void)
{
#ifdef LOG_DATA_JSON
Serial.begin(115200);
#ifdef SEEK_ON_X
// Initialize custom Serial port on the hardware using pins
// Parameters: baud rate, serial config, RX pin, TX pin
SerialPort.begin(115200, SERIAL_8N1, RX_PIN, TX_PIN);
#endif
#endif
#ifdef LILYGO
setupBoards(); // true for disable U8g2 display library
delay(500);
Serial.println("Setup LiLyGO board is done");
#endif
// LED brightness
heltec_led(25);
#ifdef OSD_ENABLED
osd.init(OSD_SCK, OSD_MISO, OSD_MOSI);
osd.clear();
/* Write the custom character to the OSD, replacing the original character*/
/* Expand 0xe0 to 0x0e0, the high 8 bits indicate page number and the low 8 bits
* indicate the inpage address.*/
osd.storeChar(0xe0, buf0);
// Display Satellite icon in the left bottom corner
osd.displayChar(14, 1, 0x10f);
/*display String*/
osd.displayString(14, 15, " Lora SA");
osd.displayString(2, 1, " Spectral RF Analyzer");
#endif
float vbat;
float resolution;
bt_start = millis();
wf_start = millis();
config = Config::init();
r.comms_initialized = Comms::initComms(config);
if (r.comms_initialized)
{
Serial.println("Comms initialized fine");
}
else
{
Serial.println("Comms did not initialize");
}
pinMode(LED, OUTPUT);
pinMode(BUZZER_PIN, OUTPUT);
pinMode(REB_PIN, OUTPUT);
heltec_setup();
#ifdef JOYSTICK_ENABLED
calibrate_joy();
pinMode(JOY_BTN_PIN, INPUT_PULLUP);
#endif
UI_Init(&display);
for (int i = 0; i < 200; i++)
{
button.update();
delay(10);
if (button.pressed())
{
r.sound_on = !r.sound_on;
tone(BUZZER_PIN, 205, 100);
delay(50);
tone(BUZZER_PIN, 205, 100);
break;
}
}
display.clear();
#ifdef WEB_SERVER
both.println("CLICK for WIFI settings.");
for (int i = 0; i < 200; i++)
{
both.print(".");
button.update();
delay(10);
if (button.pressedNow())
{
both.println("-----------");
both.println("Starting WIFI-SERVER...");
// Error here: E (15752) ledc: ledc_get_duty(745): LEDC is not initialized
tone(BUZZER_PIN, 205, 100);
delay(50);
tone(BUZZER_PIN, 205, 500);
tone(BUZZER_PIN, 205, 100);
delay(50);
serverStart();
both.println("Ready to Connect: 192.168.4.1");
delay(600);
break;
}
}
both.print("\n");
both.println("Init File System");
initLittleFS();
readConfigFile();
#endif
#ifndef WEB_SERVER
if (config.scan_ranges_sz == 0 && SCAN_RANGES.length() > 0)
{
config.configureDetectionStrategy(config.detection_strategy + ":" + SCAN_RANGES);
}
configureDetection();
both.println("FREQ BEGIN:" + String(CONF_FREQ_BEGIN));
both.println("FREQ END:" + String(CONF_FREQ_END));
both.println("SAMPLES:" + String(CONF_SAMPLES));
#endif
init_radio();
#ifndef LILYGO
vbat = heltec_vbat();
both.printf("V battery: %.2fV (%d%%)\n", vbat, heltec_battery_percent(vbat));
delay(1000);
#endif // end not LILYGO
#ifdef WIFI_SCANNING_ENABLED
WiFi.mode(WIFI_STA);
WiFi.disconnect();
#endif
#ifdef BT_SCANNING_ENABLED
#endif
delay(400);
display.clear();
resolution = (float)RANGE / (STEPS * SCAN_RBW_FACTOR);
single_page_scan = (RANGE_PER_PAGE == range);
#ifdef DISABLED_CODE
// Adjust range if it is not even to RANGE_PER_PAGE
if (!single_page_scan && range % RANGE_PER_PAGE != 0)
{
range = range + range % RANGE_PER_PAGE;
}
#endif
if (single_page_scan)
{
both.println("Single Page Screen MODE");
both.println("Multi Screen View Press P - button");
both.println("Multi Screen Res: " + String(resolution) + "Mhz/tick");
both.println(
"Resolution: " + String((float)RANGE_PER_PAGE / (STEPS * SCAN_RBW_FACTOR)) +
"MHz/tick");
for (int i = 0; i < 500; i++)
{
button.update();
delay(5);
both.print(".");
if (button.pressed())
{
RANGE_PER_PAGE = DEFAULT_RANGE_PER_PAGE;
single_page_scan = false;
tone(BUZZER_PIN, 205, 100);
delay(50);
tone(BUZZER_PIN, 205, 100);
break;
}
}
}
else
{
both.println("Multi Page Screen MODE");
both.println("Single screen View Press P - button");
both.println("Single screen Resol: " + String(resolution) + "Mhz/tick");
both.println(
"Resolution: " + String((float)RANGE_PER_PAGE / (STEPS * SCAN_RBW_FACTOR)) +
"Mhz/tick");
for (int i = 0; i < 500; i++)
{
button.update();
delay(10);
both.print(".");
if (button.pressed())
{
RANGE_PER_PAGE = range;
single_page_scan = true;
tone(BUZZER_PIN, 205, 100);
break;
}
}
}
configurePages();
display.clear();
init_fonts();
Serial.println();
#ifdef METHOD_RSSI
// TODO: try RADIOLIB_SX126X_RX_TIMEOUT_INF
#ifdef USING_SX1280PA
state = radio.startReceive(RADIOLIB_SX128X_RX_TIMEOUT_NONE);
#else
state = radio.startReceive(RADIOLIB_SX126X_RX_TIMEOUT_NONE);
#endif
if (state != RADIOLIB_ERR_NONE)
{
Serial.print(F("Failed to start receive mode, error code: "));
display.drawString(0, 64 - 10, "E:startReceive");
display.display();
delay(500);
Serial.println(state);
}
#endif
// waterfall start line y-axis
w = WATERFALL_START;
#ifdef OSD_ENABLED
osd.clear();
#endif
#ifdef LOG_DATA_JSON
xTaskCreate(logToSerialTask, "LOG_DATA_JSON", 2048, NULL, 1, &logToSerial);
#endif
xTaskCreate(dumpToCommsTask, "DUMP_RESPONSE_PROCESS", 2048, NULL, 1, &dumpToComms);
r.trigger_level = TRIGGER_LEVEL;
stacked.reset(0, 0, display.width(), display.height());
bar = new DecoratedBarChart(display, 0, 0, display.width(), 0, CONF_FREQ_BEGIN,
CONF_FREQ_END, LO_RSSI_THRESHOLD, HI_RSSI_THRESHOLD,
r.trigger_level);
size_t b = stacked.addChart(bar);
Chart *statusBar = new StatusBar(display, 0, 0, display.width(), r);
#if (WATERFALL_ENABLED == true)
size_t *multiples = new size_t[6]{5, 3, 4, 15, 4, 3};
WaterfallModel *model =
new WaterfallModel((size_t)display.width(), 1000, 6, multiples);
model->reset(millis(), display.width());
delete[] multiples;
waterChart = new WaterfallChart(display, 0, WATERFALL_START, display.width(), 0,
CONF_FREQ_BEGIN, CONF_FREQ_END, r.trigger_level,
WATERFALL_SENSITIVITY, model);
size_t c = stacked.addChart(waterChart);
stacked.setHeight(c, stacked.height - WATERFALL_START - statusBar->height);
r.addEventListener(DETECTED, *waterChart);
#endif
size_t d = stacked.addChart(statusBar);
stacked.setHeight(b, stacked.height);
r.addEventListener(DETECTED, bar->bar);
r.addEventListener(DETECTED, drone_sound_alarm, &r);
r.addEventListener(SCAN_TASK_COMPLETE, stacked);
frequency_scan_result.readings_sz = 0;
frequency_scan_result.dump.sz = 0;
r.addEventListener(ALL_EVENTS, eventListenerForReport, NULL);
#ifdef UPTIME_CLOCK
uptime = new UptimeClock(display, millis());
#endif
}
// Formula to translate 33 bin to approximate RSSI value
int binToRSSI(int bin)
{
// the first the strongest RSSI in bin value is 0
return 11 + (bin * 4);
}
// is there an input using Hot Button or joystick
bool buttonInputRequested()
{
if (button.pressedFor(100)
#ifdef JOYSTICK_ENABLED
|| joy_btn_click()
#endif
)
{
button.update();
if (button.pressedNow()
#ifdef JOYSTICK_ENABLED
|| joy_btn_click()
#endif
)
{
return true;
}
}
return false;
}
enum ButtonEvent
{
NONE = 0,
LONG_PRESS,
SHORT_PRESS,
TOO_SHORT,
SUSPEND
};
ButtonEvent buttonPressEvent()
{
button_pressed_counter = 0;
// if long press stop
while (button.pressedNow()
#ifdef JOYSTICK_ENABLED
|| joy_btn_click()
#endif
)
{
delay(10);
button_pressed_counter++;
if (button_pressed_counter > 150)
{
digitalWrite(LED, HIGH);
delay(150);
digitalWrite(LED, LOW);
}
}
if (button_pressed_counter > 150)
{
return LONG_PRESS;
}
if (button_pressed_counter > 50)
{
if (!joy_btn_clicked)
{
return SUSPEND;
}
return SHORT_PRESS;
}
button.update();
return TOO_SHORT;
}
void drone_sound_alarm(void *arg, Event &e)
{
if (e.type != DETECTED)
{
return;
}
Scan &r = *((Scan *)arg);
if (!r.sound_on)
return;
int tone_freq_db = e.detected.detected_at * 2;
int drone_detection_level = r.drone_detection_level;
int detection_count = r.detection_count;
// If level is set to sensitive,
// start beeping every 10th frequency and shorter
// it improves performance less short beep delays...
if (drone_detection_level <= 25)
{
if (tone_freq_db != 205)
{
tone_freq_db = 285 - tone_freq_db;
}
if (r.detection_count == 1 && r.sound_on)
{
tone(BUZZER_PIN, tone_freq_db,
10); // same action ??? but first time
}
if (r.detection_count % 5 == 0 && r.sound_on)
{
tone(BUZZER_PIN, tone_freq_db,
10); // same action ??? but every 5th time
}
}
else
{
if (r.detection_count % 20 == 0 && r.sound_on)
{
tone(BUZZER_PIN, 205,
10); // same action ??? but every 20th detection
}
}
}
void joystickMoveCursor(int joy_x_pressed)
{
if (joy_x_pressed > 0)
{
cursor_x_position--;
display.drawString(cursor_x_position, 0, String((int)r.current_frequency));
display.drawLine(cursor_x_position, 1, cursor_x_position, 10);
display.display();
delay(10);
}
else if (joy_x_pressed < 0)
{
cursor_x_position++;
display.drawString(cursor_x_position, 0, String((int)r.current_frequency));
display.drawLine(cursor_x_position, 1, cursor_x_position, 10);
display.display();
delay(10);
}
if (cursor_x_position > DISPLAY_WIDTH || cursor_x_position < 0)
{
cursor_x_position = 0;
display.drawString(cursor_x_position, 0, String((int)r.current_frequency));
display.drawLine(cursor_x_position, 1, cursor_x_position, 10);
display.display();
delay(10);
}
}
bool is_new_x_pixel(int x)
{
if (x % SCAN_RBW_FACTOR == 0)
return true;
else
return false;
}
/*
* Given message type and config, modify from/to to route the message to the
* right destination.
*/
void routeMessage(RoutedMessage &m)
{
if (m.message == NULL)
{
return;
}
if (m.message->type == MessageType::SCAN_RESULT ||
m.message->type == MessageType::SCAN_MAX_RESULT)
{
m.to.host = 1;
return;
}
if (m.message->type == MessageType::CONFIG_TASK &&
(m.message->payload.config.task_type == ConfigTaskType::GETSET_SUCCESS ||
m.message->payload.config.task_type == ConfigTaskType::SET_FAIL))
{
m.to.addr = 0;
m.to.host = 1;
return;
}
if (config.is_host &&
(m.message->type == MessageType::SCAN ||
m.message->type == MessageType::CONFIG_TASK &&
m.message->payload.config.key->equalsIgnoreCase("detection_strategy")))
{
m.to.lora = 1; // apply to self, and send over to lora
return;
}
}
int16_t sendMessage(RadioComms &c, Message &m);
void loraSendMessage(Message &m);
Result<int16_t, Message *> checkRadio(RadioComms &c);
void display_scan_result(ScanTaskResult &dump);
std::unordered_map<int, int16_t> findMaxRssi(int16_t *rssis, uint32_t *freqs_khz,
int dump_sz, int level = 80);
void display_raw_scan(ScanTaskResult &dump)
{
// display.setDisplayRotation(1);
// display.println("Host Mode ->");
size_t dump_sz = dump.sz;
int16_t *rssi = dump.rssis;
uint32_t *fr = dump.freqs_khz;
std::unordered_map<int, int16_t> maxMhzRssi = findMaxRssi(rssi, fr, dump_sz, 80);
Serial.println("PRINT SIZE :" + String(maxMhzRssi.size()));
int lx = 0;
int ly = 0;
int i = 0;
for (const auto &pair : maxMhzRssi)
{
if (i == 0 && maxMhzRssi.size() > 0)
{
display.clear();
}
int16_t rssi = pair.second;
int16_t fr = (int)pair.first;
Serial.println("PRINT FR:" + String(fr) + ":" + String(rssi) + " lx " +
String(lx));
// screen overflow protection
if (lx < 130)
{
display.drawString(lx, ly, String(fr) + ":" + String(rssi));
Serial.println("PRINT FR:" + String(fr) + ":" + String(rssi));
// go to next line
ly = ly + 10;
if (ly > 60)
{
ly = 0;
// go to next column
lx = lx + 45;
}
}
i++;
}
if (maxMhzRssi.size() > 0)
{
display.display();
}
}
/*
* If m.to is LOOP, the message is directed at this module; enact the message.
* If m.to is not LOOP, send the message via the respective interface.
*/
void sendMessage(RoutedMessage &m)
{
if (m.message == NULL)
{
return;
}
Message *msg = m.message;
if (m.to.loop)
{
switch (msg->type)
{
case MessageType::SCAN:
report_scans = msg->payload.scan;
requested_host = !!m.from.host;
break;
case MessageType::CONFIG_TASK:
{
ConfigTaskType ctt = msg->payload.config.task_type;
// sanity check; GETSET_SUCCESS and SET_FAIL should get routed to HOST
if (ctt == ConfigTaskType::GET || ctt == ConfigTaskType::SET)
{
// must be GET or SET - both require sending back a response
RoutedMessage resp;
resp.to.addr = m.from.addr;
resp.to.loop = 0;
resp.from.addr = 0;
resp.from.loop = 1;
resp.message = new Message();
resp.message->type = msg->type;
String old_v = config.getConfig(*msg->payload.config.key);
bool success = true;
if (ctt == ConfigTaskType::SET)
{
success = config.updateConfig(*msg->payload.config.key,
*msg->payload.config.value);
if (success &&
msg->payload.config.key->equalsIgnoreCase("detection_strategy"))
{
configureDetection(); // redo the pages and scan ranges
}
}
resp.message->payload.config.key = new String(*msg->payload.config.key);
if (success)
{
resp.message->payload.config.task_type = GETSET_SUCCESS;
resp.message->payload.config.value = new String(old_v);
}
else
{
resp.message->payload.config.task_type = SET_FAIL;
}
sendMessage(resp);
delete resp.message;
}
}
break;
case SCAN_RESULT:
case SCAN_MAX_RESULT:
if (config.is_host)
{
#ifdef DISPLAY_RAW_SCAN
display_raw_scan(m.message->payload.dump);
#else
display_scan_result(m.message->payload.dump);
#endif
}
break;
}
}
if (m.to.host)
{
HostComms->send(*m.message);
}
if (m.to.uart0)
{
Comms0->send(*m.message);
}
if (m.to.uart1)
{
Comms1->send(*m.message);
}
if (m.to.lora)
{
if (config.is_host && TxComms != NULL)
{
checkRadio(*TxComms); // waiting for peer to squak first, so message sending
// will land on the receiving cycle
}
loraSendMessage(*m.message);
}
}
RoutedMessage checkComms()
{
RoutedMessage mess;
mess.from.addr = 0;
mess.to.addr = 0;
mess.to.loop = 1;
mess.message = NULL;
while (HostComms->available() > 0)
{
Message *m = HostComms->receive();
if (m == NULL)
continue;
mess.from.host = 1;
mess.message = m;
return mess;
}
while (Comms0->available() > 0)
{
Message *m = Comms0->receive();
Serial.println("Comms0: was available, but didn't receive");
if (m == NULL)
continue;
mess.from.uart0 = 1;
mess.message = m;
return mess;
}
while (Comms1->available() > 0)
{
Message *m = Comms1->receive();
Serial.println("Comms1: was available, but didn't receive");
if (m == NULL)
continue;
mess.from.uart1 = 1;
mess.message = m;
return mess;
}
// NB: swapping the use of Tx and Rx comms, so a pair of modules
// with identical rx/tx_lora config can talk
RadioComms *rx = config.is_host ? TxComms : RxComms;
if (rx != NULL && (config.is_host || config.lora_enabled))
{
Result<int16_t, Message *> res = checkRadio(*rx);
if (!res.is_ok)
{
int16_t status = res.not_ok;
if (status != RADIOLIB_ERR_NONE)
{
Serial.printf("Error getting a message: %d\n", status);
}
}
else
{
mess.from.lora = 1;
mess.message = res.ok;
}
return mess;
}
mess.from.loop = 1;
return mess;
}
// MAX Frequency RSSI BIN value of the samples
int max_rssi_x = 999;
void doScan();
void reportScan();
void loop(void)
{
r.led_flag = false;
r.detection_count = 0;
drone_detected_frequency_start = 0;
for (RoutedMessage mess = checkComms(); mess.message != NULL; mess = checkComms())
{
routeMessage(mess);
sendMessage(mess);
delete mess.message;
}
if (!config.is_host)
{
doScan();
reportScan();
}
}
void doScan()
{
if (!radioIsScan)
{
radioIsScan = true;
initForScan(CONF_FREQ_BEGIN);
state = radio.startReceive(RADIOLIB_SX126X_RX_TIMEOUT_NONE);
}
// reset scan time
if (config.print_profile_time)
{
scan_time = 0;
loop_start = millis();
}
r.epoch++;
if (!ANIMATED_RELOAD || !single_page_scan)
{
// clear the scan plot rectangle
UI_clearPlotter();
UI_clearTopStatus();
}
// do the scan
range = CONF_FREQ_END - CONF_FREQ_BEGIN;
if (RANGE_PER_PAGE > range)
{
RANGE_PER_PAGE = range;
}
r.fr_begin = CONF_FREQ_BEGIN;
r.fr_end = r.fr_begin;
for (scan_page = 0; scan_page < scan_pages_sz; scan_page++)
{
ScanPage &page = scan_pages[scan_page];
r.fr_begin = page.start_mhz;
r.fr_end = page.end_mhz;
range = r.fr_end - r.fr_begin;
median_frequency = (page.start_mhz + page.end_mhz) / 2;
#ifdef DISABLED_CODE
if (!ANIMATED_RELOAD || !single_page_scan)
{
// clear the scan plot rectangle
UI_clearPlotter();
}
#endif
drone_detected_frequency_start = 0;
display.setTextAlignment(TEXT_ALIGN_RIGHT);
for (int i = 0; i < MAX_POWER_LEVELS; i++)
{
max_bins_array_value[i] = 0;
}
// horizontal (x axis) Frequency loop
osd_x = 1, osd_y = 2, col = 0, max_bin = 0;
// x loop
for (int range = 0, step = 0; range < page.page_sz; range += (step == 0))
{
// the logic is:
// 1. go through each scan_range in the order that they are declared
// in the page
// 2. start with scan_range.start and always end with scan_range.end
// if adding step lands us a little short of end, there will be
// extra iteration to scan actual end frequency
// 3. the next iteration after scanning end frequency will be next range
// 4. x is derived from the frequency we are going to scan with respect to
// the page size
ScanRange scan_range = page.scan_ranges[range];
uint64_t curr_freq = scan_range.start_khz + scan_range.step_khz * step;
if (curr_freq > scan_range.end_khz)
curr_freq = scan_range.end_khz;
// for now support legacy calculation of x that relies on SCAN_RBW_FACTOR
x = (curr_freq - page.start_mhz * 1000) * STEPS * SCAN_RBW_FACTOR /
((page.end_mhz - page.start_mhz) * 1000);
new_pixel = step == 0 || is_new_x_pixel(x);
if (curr_freq == scan_range.end_khz)
{
step = 0; // trigger switch to the next range on the next iteration
}
else
{
step++;
}
if (ANIMATED_RELOAD && SCAN_RBW_FACTOR == 1)
{
UI_drawCursor(x);
}
if (new_pixel && ANIMATED_RELOAD && SCAN_RBW_FACTOR > 1)
{
UI_drawCursor((int)(x / SCAN_RBW_FACTOR));
}
#ifdef PRINT_PROFILE_TIME
scan_start_time = millis();
#endif
// Real display pixel x - axis.
// Because of the SCAN_RBW_FACTOR x is not a display coordinate anymore
// x > STEPS on SCAN_RBW_FACTOR
int display_x = x / SCAN_RBW_FACTOR;
setFrequency(curr_freq / 1000.0);
LOG("Step:%d Freq: %f\n", x, r.current_frequency);
// SpectralScan Method
#ifdef METHOD_SPECTRAL
{
// start spectral scan third parameter is a sleep interval
radio.spectralScanStart(SAMPLES, 1);
// wait for spectral scan to finish
radio_error_count = 0;
while (radio.spectralScanGetStatus() != RADIOLIB_ERR_NONE)
{
Serial.println("radio.spectralScanGetStatus ERROR: ");
Serial.println(radio.spectralScanGetStatus());
display.drawString(0, 64 - 20,
"E:specScSta:" +
String(radio.spectralScanGetStatus()));
display.display();
heltec_delay(ONE_MILLISEC * 2);
radio_error_count++;
if (radio_error_count > 10)
continue;
}
// read the results Array to which the results will be saved
state = radio.spectralScanGetResult(result);
display.drawString(0, 64 - 10, "scanGetResult:" + String(state));
}
#endif
#ifdef METHOD_RSSI
// Spectrum analyzer using getRSSI
{
LOG("METHOD RSSI");
float (*g)(void *);
samples = CONF_SAMPLES;
if (config.detection_strategy.equalsIgnoreCase("RSSI") ||
config.detection_strategy.equalsIgnoreCase("RSSI_MAX"))
g = &getRSSI;
else if (config.detection_strategy.equalsIgnoreCase("CAD"))
{
g = &getCAD;
samples = min(1,
CONF_SAMPLES); // TODO: do we need to support values
// other than 1
}
else
g = &getRSSI;
uint16_t max_rssi = 120;
// Scan if not in the ignore list
if (ignoredFreq.find((int)r.current_frequency) == ignoredFreq.end())
{
max_rssi = r.rssiMethod(g, &r, samples, result,
RADIOLIB_SX126X_SPECTRAL_SCAN_RES_SIZE);
}
else
{
// if ignored default RSSI value -120dB
max_rssi = 120;
}
if (max_x_rssi[display_x] > max_rssi)
{
max_x_rssi[display_x] = max_rssi;
}
}
#endif // SCAN_METHOD == METHOD_RSSI
// if this code is not executed LORA radio doesn't work
// basically SX1262 requires delay
// osd.displayString(12, 1, String(CONF_FREQ_BEGIN));
// osd.displayString(12, 30 - 8, String(FREQ_END));
// delay(2);
#ifdef OSD_ENABLED
osdProcess();
#endif
#ifdef JOYSTICK_ENABLED
if (display_x == cursor_x_position)
{
display.setColor(BLACK);
display.fillRect(display_x - 20, 3, 36, 11);
display.setColor(WHITE);
}
#endif
Event event = r.detect(result, filtered_result,
RADIOLIB_SX126X_SPECTRAL_SCAN_RES_SIZE, samples);
event.time_ms = millis();
size_t detected_at = event.detected.detected_at;
if (max_rssi_x > detected_at)
{
// MAx bin Value not RSSI
max_rssi_x = detected_at;
}
detected_y[display_x] = false;
r.drone_detection_level = drone_detection_level;
if (event.detected.trigger)
{
// check if we should alarm about a drone presence
if (detected_y[display_x] == false) // detection threshold match
{
// Set LED to ON (filtered in UI component)
r.led_flag = true;
if (drone_detected_frequency_start == 0)
{
// mark freq start
drone_detected_frequency_start = r.current_frequency;
}
// mark freq end ... will shift right to last detected range
drone_detected_frequency_end = r.current_frequency;
#ifdef LOG_DATA_JSON
frequency_scan_result.begin = drone_detected_frequency_start;
frequency_scan_result.end = drone_detected_frequency_end;
#endif
if (DRAW_DETECTION_TICKS == true)
{
// draw vertical line on top of display for "drone detected"
// frequencies
#ifdef METHOD_SPECTRAL
if (!detected_y[display_x])
{
display.drawLine(display_x, 1, display_x, 4);
detected_y[display_x] = true;
}
#endif
}
}
}
r.fireEvent(event);
#ifdef JOYSTICK_ENABLED
// Draw joystick cursor and Frequency RSSI value
if (display_x == cursor_x_position)
{
display.drawString(display_x - 1, 0, String((int)r.current_frequency));
display.drawLine(display_x, 1, display_x, 12);
// if method scan RSSI we can get exact RSSI value
display.drawString(display_x + 17, 0, "-" + String((int)max_rssi_x * 4));
}
#endif
#ifdef PRINT_PROFILE_TIME
scan_time += (millis() - scan_start_time);
#endif
#ifdef PRINT_DEBUG
Serial.println("....\n");
#endif
if (r.animated)
{
display.display();
}
if (buttonInputRequested())
{
display.setTextAlignment(TEXT_ALIGN_CENTER);
display.drawString(display.width() / 2, 0, String(r.current_frequency));
display.display();
ButtonEvent e = buttonPressEvent();
if (e == LONG_PRESS)
{
// Remove Curent Frequency Text
display.setTextAlignment(TEXT_ALIGN_CENTER);
display.setColor(BLACK);
display.drawString(display.width() / 2, 0,
String(r.current_frequency));
display.setColor(WHITE);
display.display();
break;
}
if (e == SUSPEND)
{
// Visually confirm it's off so user releases button
display.displayOff();
// Deep sleep (has wait for release so we don't wake up
// immediately)
heltec_deep_sleep();
break;
}
if (e == SHORT_PRESS)
break;
if (e == TOO_SHORT)
{
String v = String(r.trigger_level) + " dB";
uint16_t w = display.getStringWidth(v);
display.setTextAlignment(TEXT_ALIGN_RIGHT);
// erase old drone detection level value
display.setColor(BLACK);
display.fillRect(display.width() - w, 0, 13, w);
display.setColor(WHITE);
// dt is roughly single-pixel increment
float dt =
bar->bar.height == 0
? 0.0
: (LO_RSSI_THRESHOLD - HI_RSSI_THRESHOLD) / bar->bar.height;
r.trigger_level += dt;
if (r.trigger_level <= LO_RSSI_THRESHOLD)
{
r.trigger_level = HI_RSSI_THRESHOLD;
}
// print new value
display.drawString(display.width(), 0, v);
tone(BUZZER_PIN, 104, 150);
bar->bar.redraw_all = true;
}
}
// wait a little bit before the next scan,
// otherwise the SX1262 hangs
// Add more logic before instead of long delay...
int delay_cnt = 1;
#ifdef METHOD_SPECTRAL
if (false && state != RADIOLIB_ERR_NONE)
{
if (delay_cnt == 1)
{
Serial.println("E:getResult");
display.drawString(0, 64 - 10, "E:getResult");
// trying to use display as delay..
display.display();
}
else
{
heltec_delay(ONE_MILLISEC * 2);
Serial.println("E:getStatus");
display.drawString(0, 64 - 10, "E:getResult");
// trying to use display as delay..
display.display();
}
Serial.println("spectralScanGetStatus ERROR(" +
String(radio.spectralScanGetStatus()) +
") hard delay(2) - " + String(delay_cnt));
// if error than speed is slow animating chart
ANIMATED_RELOAD = true;
delay(50);
delay_cnt++;
}
#endif
// TODO: move osd logic here as a daley ;)
// Loop is needed if heltec_delay(1) not used
heltec_loop();
// Move joystick
#ifdef JOYSTICK_ENABLED
int joy_x_pressed = get_joy_x(true);
joystickMoveCursor(joy_x_pressed);
#endif
}
w++;
if (w > ROW_STATUS_TEXT + 1)
{
w = WATERFALL_START;
}
{
Event event(r, SCAN_TASK_COMPLETE, millis());
r.fireEvent(event);
}
// Render display data here
#ifdef UPTIME_CLOCK
uptime->draw(millis());
#endif
display.display();
#ifdef OSD_ENABLED
// Sometimes OSD prints entire screen with the digits.
// We need clean the screen to fix it.
// We can do it every time but to optimise doing every N times
if (global_counter != 0 && global_counter % 10 == 0)
{
#if !defined(BT_SCANNING_ENABLED) && !defined(WIFI_SCANNING_ENABLED)
osd.clear();
osd.displayChar(14, 1, 0x10f);
global_counter = 0;
#endif
}
ANIMATED_RELOAD = false;
global_counter++;
#endif
}
#ifdef PRINT_DEBUG
// Serial.println("----");
#endif
joy_btn_clicked = false;
if (config.print_profile_time)
{
#ifdef PRINT_PROFILE_TIME
loop_time = millis() - loop_start;
Serial.printf("LOOP: %lld ms; SCAN: %lld ms;\n ", loop_time, scan_time);
#endif
}
// No WiFi and BT Scan Without OSD
#ifdef OSD_ENABLED
#ifdef WIFI_SCANNING_ENABLED
if ((millis() - wf_start) > WF_SCAN_DELAY)
{
scanWiFi();
wf_start = millis();
// prevent BT scanning after scanning WF
bt_start = millis();
}
#endif
#ifdef BT_SCANNING_ENABLED
if ((millis() - bt_start) > BT_SCAN_DELAY)
{
scanBT();
bt_start = millis();
}
#endif
sideBarCol = SIDEBAR_START_COL;
#endif
}
std::unordered_map<int, int> previousPac = {/*{916, true}, {915, true}*/};
std::unordered_map<int, int16_t> findMaxRssi(int16_t *rssis, uint32_t *freqs_khz,
int dump_sz, int level)
{
std::unordered_map<int, int16_t> maxRssiPerMHz; // Map to store max RSSI per MHz
for (int i = 0; i < dump_sz; i++)
{
int16_t rssi = rssis[i];
int freq_mhz = (int)freqs_khz[i] / 1000; // Convert kHz to MHz
// Update the maximum RSSI for this MHz frequency
if (maxRssiPerMHz.find(freq_mhz) == maxRssiPerMHz.end() ||
maxRssiPerMHz[freq_mhz] < rssi)
{
if (abs(rssi) < level)
{
maxRssiPerMHz[freq_mhz] = rssi;
}
}
}
return maxRssiPerMHz;
}
bool lock = false;
Result<int16_t, Message *> checkRadio(RadioComms &comms)
{
radioIsScan = false;
Result<int16_t, Message *> ret;
ret.is_ok = false;
ret.not_ok = comms.configureRadio();
if (ret.not_ok != RADIOLIB_ERR_NONE)
return ret;
ret.is_ok = true;
Message *msg = comms.receive(
config.is_host
? 2000
: 200); // 200ms should be enough to receive 500 bytes at SF 7 and BW 500
ret.ok = msg;
return ret;
}
int16_t sendMessage(RadioComms &comms, Message &msg)
{
radioIsScan = false;
int16_t status = comms.configureRadio();
if (status != RADIOLIB_ERR_NONE)
{
Serial.printf("Failed to configure Radio: %d\n", status);
return status;
}
if (false)
{
lock = true;
lock = false;
}
status = comms.send(msg);
if (status != RADIOLIB_ERR_NONE)
{
Serial.printf("Failed to send message of type %d: %d\n", msg.type, status);
return status;
}
return status;
}
void loraSendMessage(Message &msg)
{
RadioComms *tx = config.is_host ? RxComms : TxComms;
if (tx == NULL)
{
return;
}
sendMessage(*tx, msg);
}
void reportScan()
{
if (!config.lora_enabled)
return;
Message m;
m.type = SCAN_RESULT;
m.payload.dump.sz = 0;
if (config.detection_strategy.equalsIgnoreCase("RSSI"))
{
size_t sz = frequency_scan_result.dump.sz;
m.payload.dump.sz = sz;
m.payload.dump.freqs_khz = new uint32_t[sz];
m.payload.dump.rssis = new int16_t[sz];
memcpy(m.payload.dump.freqs_khz, frequency_scan_result.dump.freqs_khz,
sizeof(uint32_t) * sz);
memcpy(m.payload.dump.rssis, frequency_scan_result.dump.rssis,
sizeof(int16_t) * sz);
}
else if (config.detection_strategy.equalsIgnoreCase("RSSI_MAX"))
{
m.type = SCAN_MAX_RESULT;
size_t sz = config.scan_ranges_sz;
m.payload.dump.sz = sz;
m.payload.dump.freqs_khz = new uint32_t[sz];
m.payload.dump.rssis = new int16_t[sz];
for (int i = 0; i < sz; i++)
{
int16_t rssi = -999;
for (int j = 0; j < frequency_scan_result.dump.sz; j++)
{
uint32_t f = frequency_scan_result.dump.freqs_khz[j];
if (config.scan_ranges[i].start_khz > f ||
config.scan_ranges[i].end_khz < f)
continue;
rssi = max(rssi, frequency_scan_result.dump.rssis[j]);
}
m.payload.dump.freqs_khz[i] =
(config.scan_ranges[i].start_khz + config.scan_ranges[i].end_khz) / 2;
m.payload.dump.rssis[i] = rssi;
}
}
else
{
return;
}
loraSendMessage(m);
}
void display_scan_result(ScanTaskResult &dump)
{
if (bar == NULL)
return;
// assuming this module and the peer are in sync w.r.t. scan ranges
if (config.detection_strategy.equalsIgnoreCase("RSSI"))
{
for (int i = 0; i < dump.sz; i++)
bar->bar.updatePoint(dump.freqs_khz[i] / 1000, dump.rssis[i]);
bar->draw();
display.display();
return;
}
if (config.detection_strategy.equalsIgnoreCase("RSSI_MAX"))
{
float step = (bar->bar.max_x - bar->bar.min_x) / bar->bar.width;
bar->bar.clear();
bar->draw_labels = true;
for (int i = 0; i < config.scan_ranges_sz; i++)
{
int j;
for (j = 0; j < dump.sz; j++)
{
if (config.scan_ranges[i].start_khz <= dump.freqs_khz[j] &&
config.scan_ranges[i].end_khz >= dump.freqs_khz[j])
break;
}
int16_t rssi = j < dump.sz ? dump.rssis[j] : bar->bar.min_y;
for (float f = config.scan_ranges[i].start_khz / 1000;
f <= config.scan_ranges[i].end_khz / 1000; f += step)
bar->bar.updatePoint(f, rssi);
}
bar->draw();
display.display();
return;
}
}
Reference in New Issue View Git Blame Copy Permalink