iarv/LoraSA
1
0
Fork 0
mirror of https://github.com/Genaker/LoraSA.git synced 2026-05-09 06:44:55 +02:00
Code Issues Packages Projects Releases Wiki Activity

Seek On Mavic (#93)

Browse Source 
* Start of seek on mavic:
- Add build targets with LOG_DATA_JSON enabled
- remove json lib

* Switch between USB serial and HW serial

* wip: test with lower bandwidth

* use serial_out for seek on jam

* serial out

* change ports to lilygo port pin
This commit is contained in:
Konrad Iturbe
2024-12-28 15:28:44 +01:00
committed by GitHub
parent 75c994c3b0
commit e535e161d8
3 changed files with 95 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/main.cpp
+24 -22
View File
@@ -25,9 +25,6 @@
#include "FS.h"
#include <Arduino.h>
#ifdef LOG_DATA_JSON
#include <ArduinoJson.h>
#endif
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
#include <File.h>
@@ -233,15 +230,16 @@ uint64_t scan_time = 0;
uint64_t scan_start_time = 0;
#endif
// Define which UART port to use (0, 1, or 2)
// log data via serial console, JSON format:
// Optionally it can be enabled via this flag, although its recommended to use
// platformio config flag -DLOG_DATA_JSON
// #define LOG_DATA_JSON true
#ifdef SEEK_ON_X
#define SERIAL_PORT 1
// Define which pins to use
#define TX_PIN 12
#define RX_PIN 16 // not used
// Create HardwareSerial instance (UART 1 or 2)
HardwareSerial SerialPort(SERIAL_PORT);
#endif
// #define WEB_SERVER true
@@ -778,8 +776,6 @@ void dumpToCommsTask(void *parameter)
#ifdef LOG_DATA_JSON
void logToSerialTask(void *parameter)
{
JsonDocument doc;
char jsonOutput[200];
uint64_t last_epoch = frequency_scan_result.last_epoch;
frequency_scan_result.rssi = -999;
@@ -797,12 +793,19 @@ void logToSerialTask(void *parameter)
continue;
}
doc["low_range_freq"] = frequency_scan_result.begin;
doc["high_range_freq"] = frequency_scan_result.end;
doc["value"] = String(highest_value_scanned);
serializeJson(doc, jsonOutput);
SerialPort.println(jsonOutput);
#ifdef SEEK_ON_X
SerialPort.printf("{\"low_range_freq\": %" PRIu64
", \"high_range_freq\": %" PRIu64 ", "
"\"value\": \"%" PRIi16 "\"}\n",
frequency_scan_result.begin, frequency_scan_result.end,
highest_value_scanned);
#else
Serial.printf("{\"low_range_freq\": %" PRIu64
", \"high_range_freq\": %" PRIu64 ", "
"\"value\": \"%" PRIi16 "\"}\n",
frequency_scan_result.begin, frequency_scan_result.end,
highest_value_scanned);
#endif
}
}
}
@@ -972,18 +975,17 @@ void setup(void)
#ifdef LOG_DATA_JSON
Serial.begin(115200);
// Initialize custom Serial port
#ifdef SEEK_ON_X
// Initialize custom Serial port on the hardware using pins
// Parameters: baud rate, serial config, RX pin, TX pin
SerialPort.begin(115200, SERIAL_8N1, RX_PIN, TX_PIN);
#endif
#endif
#ifdef LILYGO
setupBoards(); // true for disable U8g2 display library
delay(500);
Serial.println("Setup LiLybeginSDCardGO board is done");
#else
// Serial0.begin(115200); // Initialize UART0
// Serial0.println("Hello, Serial0 (UART0)!");
Serial.println("Setup LiLyGO board is done");
#endif
// LED brightness