diff --git a/installer/install_upgrade.bat b/installer/install_upgrade.bat
deleted file mode 100644
index 42b23aa..0000000
--- a/installer/install_upgrade.bat
+++ /dev/null
@@ -1,39 +0,0 @@
-@echo off
-echo Loading...
-
-where /q python.exe
-if %errorlevel% neq 0 (
-    echo "Python is not installed. Please install it and try again."
-    exit /b
-)
-
-where /q pip
-if %errorlevel% neq 0 (
-    echo "pip is not installed. Please install it and try again."
-    exit /b
-)
-
-pip show pyserial >nul 2>&1
-if %errorlevel% neq 0 (
-    echo "Installing pyserial..."
-    pip install pyserial
-)
-
-echo Your firmware will be upgraded without factory reset.
-
-echo:
-
-echo IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.bat INSTEAD!
-
-echo:
-
-echo Available COM ports:
-python.exe -c "import serial.tools.list_ports; print('\n'.join([str(c) for c in serial.tools.list_ports.comports()]))"
-
-echo:
-
-set /p port="Enter COM port (for example COM5): "
-
-python.exe ./bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-pause
\ No newline at end of file
diff --git a/installer/install_upgrade.sh b/installer/install_upgrade.sh
deleted file mode 100644
index 8a1b947..0000000
--- a/installer/install_upgrade.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-echo "Your firmware will be upgraded without factory reset."
-echo "IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.sh INSTEAD!"
-
-read -p "Enter COM port (for example /dev/ttyS5): " port
-
-PYTHON_CMD=python
-if command -v python3 &> /dev/null
-then
-    PYTHON_CMD=python3
-fi
-
-PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-echo "Firmware flashed"
\ No newline at end of file
diff --git a/installer/install_with_factory_reset.bat b/installer/install_with_factory_reset.bat
deleted file mode 100644
index 2b694b3..0000000
--- a/installer/install_with_factory_reset.bat
+++ /dev/null
@@ -1,44 +0,0 @@
-@echo off
-echo Loading...
-
-where /q python.exe
-if %errorlevel% neq 0 (
-    echo "Python is not installed. Please install it and try again."
-    exit /b
-)
-
-where /q pip
-if %errorlevel% neq 0 (
-    echo "pip is not installed. Please install it and try again."
-    exit /b
-)
-
-pip show pyserial >nul 2>&1
-if %errorlevel% neq 0 (
-    echo "Installing pyserial..."
-    pip install pyserial
-)
-
-
-echo Your current configuration will be LOST!!!
-echo Your current configuration will be LOST!!!
-echo Your current configuration will be LOST!!!
-
-echo:
-
-echo If you already have this board flashed with our firmware please use install_upgrade.bat instead!
-
-echo:
-
-echo Available COM ports:
-python.exe -c "import serial.tools.list_ports; print('\n'.join([str(c) for c in serial.tools.list_ports.comports()]))"
-
-echo:
-
-set /p port="Enter COM port (for example COM5): "
-
-python.exe bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 2686976 firmware/spiffs.bin
-
-python.exe bin/esptool/esptool.py --chip esp32 --port "%port%" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-pause
\ No newline at end of file
diff --git a/installer/install_with_factory_reset.sh b/installer/install_with_factory_reset.sh
deleted file mode 100644
index 0d70661..0000000
--- a/installer/install_with_factory_reset.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo "Your firmware will be upgraded without factory reset."
-echo "IF THIS IS YOUR FIRST FLASH ON THIS BOARD PLEASE USE install_with_factory_reset.sh INSTEAD!"
-
-read -p "Enter COM port (for example /dev/ttyS5): " port
-
-PYTHON_CMD=python
-if command -v python3 &> /dev/null
-then
-    PYTHON_CMD=python3
-fi
-
-$PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 2686976 firmware/spiffs.bin
-
-$PYTHON_CMD ./bin/esptool/esptool.py --chip esp32 --port "$port" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0x1000 firmware/bootloader.bin 0x8000 firmware/partitions.bin 0xe000 firmware/boot_app0.bin 0x10000 firmware/firmware.bin
-
-echo "Firmware flashed"
\ No newline at end of file