diff --git a/README.md b/README.md
index 63e20db..8d3e578 100644
--- a/README.md
+++ b/README.md
@@ -7,18 +7,16 @@
   
 * receive + transmit LoRa P2P and LoRaWAN packets
 
-* Rules to execute specific commands, Scanner with LoRaWAN and Mesh activity measurement, switchable relay outputs, Auto-Discovery, Simplex-, Duplex-, Repeater-mode, etc.
+* Rules to execute specific commands, Scanner, switchable relay outputs, Simplex-, Duplex-, Repeater-mode, etc.
 
 * "LoRa to LoRaWAN - Bridge" for example, you can forward sensor data received via P2P to LoRaAWN 
 or send control commands received via LoRaWAN back out via LoRa P2P
-
-* The corresponding 433 MHz models are also supported
 <br>
 
 ## Hardware Requirements
 
 Heltec WIFI LoRa esp32 [V2](https://heltec.org/project/wifi-lora-32v2/) [V3](https://heltec.org/project/wifi-lora-32v3/) 
-[V4](https://heltec.org/project/wifi-lora-32-v4/) [VM E213](https://heltec.org/project/vision-master-e213) (868/915)    
+[V4](https://heltec.org/project/wifi-lora-32-v4/) [E213](https://heltec.org/project/vision-master-e213) (868/915)    
 
 [LilyGo TTGO LoRa esp32 V2 1.6.1](https://github.com/LilyGO/TTGO-LoRa32-V2.1) + SD-card support (433/868/915)     
   
@@ -30,9 +28,8 @@ support for SD, Oled-Display or [E-Paper-Display](https://www.bastelgarage.ch/lo
    
      
 You can flash your device directly using the [LoRa Monitor – Firmware Flasher](https://ronmeier.github.io/Lora-Web-Flasher)    
-Note: Not all web browsers support flashing via the serial port. Please use a compatible browser (e.g., Chrome or Edge).    
 
-After flashing, the device will open a WiFi access point (AP) named "Lora-Monitor".
+After flashing, the device will open a WiFi access point.
 Connect your smartphone (or computer) to this network, then open 192.168.4.1 in your web browser.
 On the configuration page, enter your WiFi network name (SSID) and password. After saving, the ESP will automatically connect to your own network the next time it starts.