my znc was working fin on centos7 but after reboot doest work #880

New Issue

Closed

opened 2026-10-05 04:50:15 +02:00 by adam · 16 comments

adam commented 2026-10-05 04:50:15 +02:00

Owner

Copy link

Copy source

i tried reinstall it over and over again and it wont work any help to get it back online would be apreciated
this is what i'm getting

[root@ns388373 ~]# systemctl enable znc.service
Created symlink from /etc/systemd/system/multi-user.target.wants/znc.service to /usr/lib/systemd/system/znc.service.
[root@ns388373 ~]# systemctl start znc.service
[root@ns388373 ~]# service znc status -l
Redirecting to /bin/systemctl status -l znc.service
● znc.service - ZNC, an advanced IRC bouncer
Loaded: loaded (/usr/lib/systemd/system/znc.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sun 2018-10-14 17:10:29 CEST; 3s ago
Process: 30061 ExecStart=/usr/bin/znc -f (code=exited, status=1/FAILURE)
Main PID: 30061 (code=exited, status=1/FAILURE)

Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Started ZNC, an advanced IRC bouncer.
Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Starting ZNC, an advanced IRC bouncer...
Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: znc.service: main process exited, code=exited, status=1/FAILURE
Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Unit znc.service entered failed state.
Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: znc.service failed.

i tried reinstall it over and over again and it wont work any help to get it back online would be apreciated this is what i'm getting [root@ns388373 ~]# systemctl enable znc.service Created symlink from /etc/systemd/system/multi-user.target.wants/znc.service to /usr/lib/systemd/system/znc.service. [root@ns388373 ~]# systemctl start znc.service [root@ns388373 ~]# service znc status -l Redirecting to /bin/systemctl status -l znc.service ● znc.service - ZNC, an advanced IRC bouncer Loaded: loaded (/usr/lib/systemd/system/znc.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sun 2018-10-14 17:10:29 CEST; 3s ago Process: 30061 ExecStart=/usr/bin/znc -f (code=exited, status=1/FAILURE) Main PID: 30061 (code=exited, status=1/FAILURE) Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Started ZNC, an advanced IRC bouncer. Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Starting ZNC, an advanced IRC bouncer... Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: znc.service: main process exited, code=exited, status=1/FAILURE Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: Unit znc.service entered failed state. Oct 14 17:10:29 ns388373.ip-176-31-101.eu systemd[1]: znc.service failed. <!-- github-sync-id:369912099 -->

adam closed this issue 2026-10-05 04:50:16 +02:00

adam commented 2026-10-05 04:50:16 +02:00

Author

Owner

Copy link

Copy source

Well... can you somehow get some actual output from ZNC? What happens when you run znc -f as root yourself? (Assuming your systemd unit runs ZNC as root)

Well... can you somehow get some actual output from ZNC? What happens when you run `znc -f` as root yourself? (Assuming your systemd unit runs ZNC as root) <!-- github-comment-id:429636261 -->

adam commented 2026-10-05 04:50:17 +02:00

Author

Owner

Copy link

Copy source

I am running it as root

I am running it as root <!-- github-comment-id:429652549 -->

adam commented 2026-10-05 04:50:18 +02:00

Author

Owner

Copy link

Copy source

[root@ns388373 ~]# znc
[ .. ] Checking for list of available modules...
[ ** ] You are running ZNC as root! Don't do that! There are not many valid
[ ** ] reasons for this and it can, in theory, cause great damage!
[root@ns388373 ~]# znc -f
[ .. ] Checking for list of available modules...
[ ** ] You are running ZNC as root! Don't do that! There are not many valid
[ ** ] reasons for this and it can, in theory, cause great damage!

[root@ns388373 ~]# znc [ .. ] Checking for list of available modules... [ ** ] You are running ZNC as root! Don't do that! There are not many valid [ ** ] reasons for this and it can, in theory, cause great damage! [root@ns388373 ~]# znc -f [ .. ] Checking for list of available modules... [ ** ] You are running ZNC as root! Don't do that! There are not many valid [ ** ] reasons for this and it can, in theory, cause great damage! <!-- github-comment-id:429652763 -->

adam commented 2026-10-05 04:50:18 +02:00

Author

Owner

Copy link

Copy source

If you recently updated znc you may need to rebuild your clientbuffer module. This tripped me up when updating from Fedora 27 to 28.

https://wiki.znc.in/Clientbuffer

Would perform an ldd on your znc binary and make sure also that all necessary lib dependencies resolve.

If you recently updated znc you may need to rebuild your clientbuffer module. This tripped me up when updating from Fedora 27 to 28. https://wiki.znc.in/Clientbuffer Would perform an ldd on your znc binary and make sure also that all necessary lib dependencies resolve. <!-- github-comment-id:429655316 -->

adam commented 2026-10-05 04:50:19 +02:00

Author

Owner

Copy link

Copy source

Hm. https://github.com/znc/znc/commit/1a7895cbd4f733e2c0eedfa371047e4df7fab1e9 is quite old (10 years). I do not really know why znc would previously not have complained about running as root?!?
You could just start znc with --allow-root to make znc start, but I have no idea why this used to work for you.

Hm. https://github.com/znc/znc/commit/1a7895cbd4f733e2c0eedfa371047e4df7fab1e9 is quite old (10 years). I do not really know why znc would previously not have complained about running as root?!? You could just start znc with `--allow-root` to make znc start, but I have no idea why this used to work for you. <!-- github-comment-id:429657557 -->

adam commented 2026-10-05 04:50:20 +02:00

Author

Owner

Copy link

Copy source

@sebito91 all installed third-party modules need to be rebuilt. @xapim didn't indicate that he has installed any.

@xapim maybe it was running not as root? Check what user znc.service runs it in. Run it as the same user. Also journalctl might have logs which you can look at.

@sebito91 all installed third-party modules need to be rebuilt. @xapim didn't indicate that he has installed any. @xapim maybe it was running not as root? Check what user `znc.service` runs it in. Run it as the same user. Also journalctl might have logs which you can look at. <!-- github-comment-id:429657945 -->

adam commented 2026-10-05 04:50:20 +02:00

Author

Owner

Copy link

Copy source

its weird has been runing fine until i rebooted the server for whm updates then stopped working and counldnt start again

its weird has been runing fine until i rebooted the server for whm updates then stopped working and counldnt start again <!-- github-comment-id:429657956 -->

adam commented 2026-10-05 04:50:21 +02:00

Author

Owner

Copy link

Copy source

[root@ns388373 ~]# znc --allow-root
[ .. ] Checking for list of available modules...
[ ** ] You are running ZNC as root! Don't do that! There are not many valid
[ ** ] reasons for this and it can, in theory, cause great damage!
[ ** ] You have been warned.
[ ** ] Hit CTRL+C now if you don't want to run ZNC as root.
[ ** ] ZNC will start in 30 seconds.
[ .. ] Opening config [/root/.znc/configs/znc.conf]...
[ !! ] No such file
[ ** ] Restart ZNC with the --makeconf option if you wish to create this config.
[ ** ] Unrecoverable config error.

[root@ns388373 ~]# znc --allow-root [ .. ] Checking for list of available modules... [ ** ] You are running ZNC as root! Don't do that! There are not many valid [ ** ] reasons for this and it can, in theory, cause great damage! [ ** ] You have been warned. [ ** ] Hit CTRL+C now if you don't want to run ZNC as root. [ ** ] ZNC will start in 30 seconds. [ .. ] Opening config [/root/.znc/configs/znc.conf]... [ !! ] No such file [ ** ] Restart ZNC with the --makeconf option if you wish to create this config. [ ** ] Unrecoverable config error. <!-- github-comment-id:429658002 -->

adam commented 2026-10-05 04:50:22 +02:00

Author

Owner

Copy link

Copy source

the conf is there:

// WARNING
//
// Do NOT edit this file while ZNC is running!
// Use webadmin or *controlpanel instead.
//
// Altering this file by hand will forfeit all support.
//
// But if you feel risky, you might want to read help on /znc saveconfig and /znc rehash.
// Also check https://wiki.znc.in/Configuration

AnonIPLimit = 10
AuthOnlyViaModule = false
ConfigWriteDelay = 0
ConnectDelay = 5
HideVersion = false
LoadModule = webadmin
LoadModule = admindebug
LoadModule = adminlog
LoadModule = chansaver
LoadModule = lastseen
LoadModule = log
LoadModule = notify_connect
LoadModule = partyline
MaxBufferSize = 500
ProtectWebSessions = true
SSLCertFile = /var/lib/znc/.znc/znc.pem
SSLDHParamFile = /var/lib/znc/.znc/znc.pem
SSLKeyFile = /var/lib/znc/.znc/znc.pem
ServerThrottle = 30
Skin = forest
StatusPrefix = *
Version = 1.7.1

AllowIRC = true AllowWeb = true IPv4 = true IPv6 = true Port = 59001 SSL = true URIPrefix = / Admin = false Allow = * AltNick = Just_Pain AppendTimestamp = false AuthOnlyViaModule = false AutoClearChanBuffer = true AutoClearQueryBuffer = true ChanBufferSize = 50 ClientEncoding = ^UTF-8 DenyLoadMod = false DenySetBindHost = false Ident = Just_Pain JoinTries = 10 LoadModule = alias LoadModule = autoattach LoadModule = autoreply LoadModule = chansaver LoadModule = clientnotify LoadModule = controlpanel LoadModule = perform LoadModule = raw LoadModule = stripcontrols LoadModule = webadmin MaxJoins = 0 MaxNetworks = 1 MaxQueryBuffers = 50 MultiClients = true Nick = Just_Pain NoTrafficTimeout = 180 PrependTimestamp = true QueryBufferSize = 50 QuitMsg = %znc% RealName = ZNC - https://znc.in TimestampFormat = [%H:%M:%S]

<Pass password>
	Hash = dad2f8914979460a9edae12da9688b15fe772a9c0810b84b9f8544341c46a3fa
	Method = SHA256
	Salt = y_YGKK!3A!G.sg-oM275
</Pass>

Admin = true Allow = * AltNick = xapim_ AppendTimestamp = true AuthOnlyViaModule = false AutoClearChanBuffer = true AutoClearQueryBuffer = true ChanBufferSize = 50 DenyLoadMod = false DenySetBindHost = false Ident = xapim JoinTries = 10 LoadModule = chansaver LoadModule = controlpanel LoadModule = alias LoadModule = autoattach LoadModule = autoreply LoadModule = clientnotify LoadModule = ctcpflood 4 2 LoadModule = dcc LoadModule = flooddetach 5 2 LoadModule = listsockets LoadModule = log LoadModule = notes LoadModule = perform LoadModule = raw LoadModule = shell LoadModule = stripcontrols LoadModule = webadmin MaxJoins = 0 MaxNetworks = 1 MaxQueryBuffers = 50 MultiClients = true Nick = xapim NoTrafficTimeout = 180 PrependTimestamp = true QueryBufferSize = 50 QuitMsg = %znc% RealName = ZNC - https://znc.in TimestampFormat = [%H:%M:%S]

<Network Ptnet>
	FloodBurst = 9
	FloodRate = 2.00
	IRCConnectEnabled = true
	JoinDelay = 0
	LoadModule = simple_away
	LoadModule = perform
	Server = uevora.ptnet.org +6697
	TrustAllCerts = false
	TrustPKI = true

	<Chan #10-80>
	</Chan>

	<Chan #30-50>
	</Chan>

	<Chan #Portugal>
	</Chan>

	<Chan #Radio>
	</Chan>

	<Chan #eggdrop>
	</Chan>

	<Chan #mircodependentes>
	</Chan>
</Network>

<Pass password>
	Hash = f2898fb7360f8292f9b87bde52ae05161a0ab47d1ff8878f0d440c17d08dc04d
	Method = SHA256
	Salt = O;j8khdn;FzHlDmHBT7M
</Pass>

the conf is there: // WARNING // // Do NOT edit this file while ZNC is running! // Use webadmin or *controlpanel instead. // // Altering this file by hand will forfeit all support. // // But if you feel risky, you might want to read help on /znc saveconfig and /znc rehash. // Also check https://wiki.znc.in/Configuration AnonIPLimit = 10 AuthOnlyViaModule = false ConfigWriteDelay = 0 ConnectDelay = 5 HideVersion = false LoadModule = webadmin LoadModule = admindebug LoadModule = adminlog LoadModule = chansaver LoadModule = lastseen LoadModule = log LoadModule = notify_connect LoadModule = partyline MaxBufferSize = 500 ProtectWebSessions = true SSLCertFile = /var/lib/znc/.znc/znc.pem SSLDHParamFile = /var/lib/znc/.znc/znc.pem SSLKeyFile = /var/lib/znc/.znc/znc.pem ServerThrottle = 30 Skin = forest StatusPrefix = * Version = 1.7.1 <Listener listener0> AllowIRC = true AllowWeb = true IPv4 = true IPv6 = true Port = 59001 SSL = true URIPrefix = / </Listener> <User Just_Pain> Admin = false Allow = * AltNick = Just_Pain AppendTimestamp = false AuthOnlyViaModule = false AutoClearChanBuffer = true AutoClearQueryBuffer = true ChanBufferSize = 50 ClientEncoding = ^UTF-8 DenyLoadMod = false DenySetBindHost = false Ident = Just_Pain JoinTries = 10 LoadModule = alias LoadModule = autoattach LoadModule = autoreply LoadModule = chansaver LoadModule = clientnotify LoadModule = controlpanel LoadModule = perform LoadModule = raw LoadModule = stripcontrols LoadModule = webadmin MaxJoins = 0 MaxNetworks = 1 MaxQueryBuffers = 50 MultiClients = true Nick = Just_Pain NoTrafficTimeout = 180 PrependTimestamp = true QueryBufferSize = 50 QuitMsg = %znc% RealName = ZNC - https://znc.in TimestampFormat = [%H:%M:%S] <Pass password> Hash = dad2f8914979460a9edae12da9688b15fe772a9c0810b84b9f8544341c46a3fa Method = SHA256 Salt = y_YGKK!3A!G.sg-oM275 </Pass> </User> <User xapim> Admin = true Allow = * AltNick = xapim_ AppendTimestamp = true AuthOnlyViaModule = false AutoClearChanBuffer = true AutoClearQueryBuffer = true ChanBufferSize = 50 DenyLoadMod = false DenySetBindHost = false Ident = xapim JoinTries = 10 LoadModule = chansaver LoadModule = controlpanel LoadModule = alias LoadModule = autoattach LoadModule = autoreply LoadModule = clientnotify LoadModule = ctcpflood 4 2 LoadModule = dcc LoadModule = flooddetach 5 2 LoadModule = listsockets LoadModule = log LoadModule = notes LoadModule = perform LoadModule = raw LoadModule = shell LoadModule = stripcontrols LoadModule = webadmin MaxJoins = 0 MaxNetworks = 1 MaxQueryBuffers = 50 MultiClients = true Nick = xapim NoTrafficTimeout = 180 PrependTimestamp = true QueryBufferSize = 50 QuitMsg = %znc% RealName = ZNC - https://znc.in TimestampFormat = [%H:%M:%S] <Network Ptnet> FloodBurst = 9 FloodRate = 2.00 IRCConnectEnabled = true JoinDelay = 0 LoadModule = simple_away LoadModule = perform Server = uevora.ptnet.org +6697 TrustAllCerts = false TrustPKI = true <Chan #10-80> </Chan> <Chan #30-50> </Chan> <Chan #Portugal> </Chan> <Chan #Radio> </Chan> <Chan #eggdrop> </Chan> <Chan #mircodependentes> </Chan> </Network> <Pass password> Hash = f2898fb7360f8292f9b87bde52ae05161a0ab47d1ff8878f0d440c17d08dc04d Method = SHA256 Salt = O;j8khdn;FzHlDmHBT7M </Pass> </User> <!-- github-comment-id:429658060 -->

adam commented 2026-10-05 04:50:22 +02:00

Author

Owner

Copy link

Copy source

like i said its really weird as it was working fine even starting with root account wouldnt warn anything i already yum remove znc deleted the var/lib/znc and yum install znc so many times created new confs from scratch with ssl without ssl without adding server and nothing works can't get it to work :(

like i said its really weird as it was working fine even starting with root account wouldnt warn anything i already yum remove znc deleted the var/lib/znc and yum install znc so many times created new confs from scratch with ssl without ssl without adding server and nothing works can't get it to work :( <!-- github-comment-id:429660472 -->

adam commented 2026-10-05 04:50:23 +02:00

Author

Owner

Copy link

Copy source

the conf above was the previous working conf which isn't working now

the conf above was the previous working conf which isn't working now <!-- github-comment-id:429660551 -->

adam commented 2026-10-05 04:50:24 +02:00

Author

Owner

Copy link

Copy source

oh well i give up and go back to park my nick using my pc i compiled znc again following this steps
https://wiki.znc.in/User:Teward/ZNC_From_Source:_CentOS_7

and still no go when i make the conf either it says there is already a conf in the dir or if i delete the existing conf says it cant find the file i just give up what pisses me off more it's that it had been working fine since i installed it the first time via yum :(

oh well i give up and go back to park my nick using my pc i compiled znc again following this steps https://wiki.znc.in/User:Teward/ZNC_From_Source:_CentOS_7 and still no go when i make the conf either it says there is already a conf in the dir or if i delete the existing conf says it cant find the file i just give up what pisses me off more it's that it had been working fine since i installed it the first time via yum :( <!-- github-comment-id:429672342 -->

adam commented 2026-10-05 04:50:24 +02:00

Author

Owner

Copy link

Copy source

Without error message why exactly ZNC wasn't starting after reboot, we can't do anything

Without error message why exactly ZNC wasn't starting after reboot, we can't do anything <!-- github-comment-id:440167127 -->

adam commented 2026-10-05 04:50:25 +02:00

Author

Owner

Copy link

Copy source

i managed to get it working again by compiling it all from scratch manually but after a few server reboots (due to cpanel upgrades) it won't start anymore the error now its cannot locate the pem file

] Unable to locate pem file: /var/lib/znc/.znc/znc.pem
[ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes
[ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]...
[ !! ] Unable to open

file is there i checked myself and even tried to delete and make conf again no luck

i managed to get it working again by compiling it all from scratch manually but after a few server reboots (due to cpanel upgrades) it won't start anymore the error now its cannot locate the pem file ] Unable to locate pem file: /var/lib/znc/.znc/znc.pem [ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes [ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]... [ !! ] Unable to open file is there i checked myself and even tried to delete and make conf again no luck <!-- github-comment-id:440227288 -->

adam commented 2026-10-05 04:50:26 +02:00

Author

Owner

Copy link

Copy source

sh-4.2$ znc -f
[ .. ] Checking for list of available modules...
[ .. ] Opening config [/home/xapim/.znc/configs/znc.conf]...
[ .. ] Loading global module [webadmin]...
[ .. ] Loading global module [admindebug]...
[ .. ] Loading global module [adminlog]...
[ .. ] Loading global module [chansaver]...
[ .. ] Loading global module [lastseen]...
[ .. ] Loading global module [log]...
[ .. ] Loading global module [notify_connect]...
[ .. ] Loading global module [partyline]...
[ .. ] Binding to port [+59001]...
[ !! ] Unable to locate pem file: /var/lib/znc/.znc/znc.pem
[ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes
[ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]...
[ !! ] Unable to open
[ .. ] Binding to port [+59001]...
[ ** ] Loading user [Just_Pain]
[ .. ] Loading user module [alias]...
[ .. ] Loading user module [autoattach]...
[ .. ] Loading user module [autoreply]...
[ .. ] Loading user module [chansaver]...
[ .. ] Loading user module [clientnotify]...
[ .. ] Loading user module [controlpanel]...
[ .. ] Loading user module [perform]...
[ .. ] Loading user module [raw]...
[ .. ] Loading user module [stripcontrols]...
[ .. ] Loading user module [webadmin]...
[ ** ] Loading user [xapim]
[ ** ] Loading network [Ptnet]
[ .. ] Loading network module [simple_away]...
[ >> ] [/usr/local/lib/znc/simple_away.so]
[ .. ] Loading network module [perform]...
[ >> ] [/usr/local/lib/znc/perform.so]
[ .. ] Adding server [uevora.ptnet.org +6697]...
[ .. ] Loading user module [chansaver]...
[ .. ] Loading user module [controlpanel]...
[ .. ] Loading user module [alias]...
[ .. ] Loading user module [autoattach]...
[ .. ] Loading user module [autoreply]...
[ .. ] Loading user module [clientnotify]...
[ .. ] Loading user module [ctcpflood]...
[ .. ] Loading user module [dcc]...
[ .. ] Loading user module [flooddetach]...
[ .. ] Loading user module [listsockets]...
[ .. ] Loading user module [log]...
[ .. ] Loading user module [notes]...
[ .. ] Loading user module [perform]...
[ .. ] Loading user module [raw]...
[ .. ] Loading user module [shell]...
[ .. ] Loading user module [stripcontrols]...
[ .. ] Loading user module [webadmin]...
[ ** ] Staying open for debugging [pid: 32564]
[ ** ] ZNC 1.7.1 - https://znc.in

sh-4.2$ znc -f [ .. ] Checking for list of available modules... [ .. ] Opening config [/home/xapim/.znc/configs/znc.conf]... [ .. ] Loading global module [webadmin]... [ .. ] Loading global module [admindebug]... [ .. ] Loading global module [adminlog]... [ .. ] Loading global module [chansaver]... [ .. ] Loading global module [lastseen]... [ .. ] Loading global module [log]... [ .. ] Loading global module [notify_connect]... [ .. ] Loading global module [partyline]... [ .. ] Binding to port [+59001]... [ !! ] Unable to locate pem file: /var/lib/znc/.znc/znc.pem [ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes [ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]... [ !! ] Unable to open [ .. ] Binding to port [+59001]... [ ** ] Loading user [Just_Pain] [ .. ] Loading user module [alias]... [ .. ] Loading user module [autoattach]... [ .. ] Loading user module [autoreply]... [ .. ] Loading user module [chansaver]... [ .. ] Loading user module [clientnotify]... [ .. ] Loading user module [controlpanel]... [ .. ] Loading user module [perform]... [ .. ] Loading user module [raw]... [ .. ] Loading user module [stripcontrols]... [ .. ] Loading user module [webadmin]... [ ** ] Loading user [xapim] [ ** ] Loading network [Ptnet] [ .. ] Loading network module [simple_away]... [ >> ] [/usr/local/lib/znc/simple_away.so] [ .. ] Loading network module [perform]... [ >> ] [/usr/local/lib/znc/perform.so] [ .. ] Adding server [uevora.ptnet.org +6697]... [ .. ] Loading user module [chansaver]... [ .. ] Loading user module [controlpanel]... [ .. ] Loading user module [alias]... [ .. ] Loading user module [autoattach]... [ .. ] Loading user module [autoreply]... [ .. ] Loading user module [clientnotify]... [ .. ] Loading user module [ctcpflood]... [ .. ] Loading user module [dcc]... [ .. ] Loading user module [flooddetach]... [ .. ] Loading user module [listsockets]... [ .. ] Loading user module [log]... [ .. ] Loading user module [notes]... [ .. ] Loading user module [perform]... [ .. ] Loading user module [raw]... [ .. ] Loading user module [shell]... [ .. ] Loading user module [stripcontrols]... [ .. ] Loading user module [webadmin]... [ ** ] Staying open for debugging [pid: 32564] [ ** ] ZNC 1.7.1 - https://znc.in <!-- github-comment-id:440228212 -->

adam commented 2026-10-05 04:50:26 +02:00

Author

Owner

Copy link

Copy source

Did you move the config from /var/lib/znc to /home/xapim? If so, update the
path to the certificate inside the znc.conf

вт, 20 нояб. 2018 г. в 10:45, xapim notifications@github.com:

sh-4.2$ znc -f
[ .. ] Checking for list of available modules...
[ .. ] Opening config [/home/xapim/.znc/configs/znc.conf]...
[ .. ] Loading global module [webadmin]...
[ .. ] Loading global module [admindebug]...
[ .. ] Loading global module [adminlog]...
[ .. ] Loading global module [chansaver]...
[ .. ] Loading global module [lastseen]...
[ .. ] Loading global module [log]...
[ .. ] Loading global module [notify_connect]...
[ .. ] Loading global module [partyline]...
[ .. ] Binding to port [+59001]...
[ !! ] Unable to locate pem file: /var/lib/znc/.znc/znc.pem
[ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes
[ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]...
[ !! ] Unable to open
[ .. ] Binding to port [+59001]...
[ ** ] Loading user [Just_Pain]
[ .. ] Loading user module [alias]...
[ .. ] Loading user module [autoattach]...
[ .. ] Loading user module [autoreply]...
[ .. ] Loading user module [chansaver]...
[ .. ] Loading user module [clientnotify]...
[ .. ] Loading user module [controlpanel]...
[ .. ] Loading user module [perform]...
[ .. ] Loading user module [raw]...
[ .. ] Loading user module [stripcontrols]...
[ .. ] Loading user module [webadmin]...
[ ** ] Loading user [xapim]
[ ** ] Loading network [Ptnet]
[ .. ] Loading network module [simple_away]...
[ >> ] [/usr/local/lib/znc/simple_away.so]
[ .. ] Loading network module [perform]...
[ >> ] [/usr/local/lib/znc/perform.so]
[ .. ] Adding server [uevora.ptnet.org +6697]...
[ .. ] Loading user module [chansaver]...
[ .. ] Loading user module [controlpanel]...
[ .. ] Loading user module [alias]...
[ .. ] Loading user module [autoattach]...
[ .. ] Loading user module [autoreply]...
[ .. ] Loading user module [clientnotify]...
[ .. ] Loading user module [ctcpflood]...
[ .. ] Loading user module [dcc]...
[ .. ] Loading user module [flooddetach]...
[ .. ] Loading user module [listsockets]...
[ .. ] Loading user module [log]...
[ .. ] Loading user module [notes]...
[ .. ] Loading user module [perform]...
[ .. ] Loading user module [raw]...
[ .. ] Loading user module [shell]...
[ .. ] Loading user module [stripcontrols]...
[ .. ] Loading user module [webadmin]...
[ ** ] Staying open for debugging [pid: 32564]
[ ** ] ZNC 1.7.1 - https://znc.in

—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub
https://github.com/znc/znc/issues/1609#issuecomment-440228212, or mute
the thread
https://github.com/notifications/unsubscribe-auth/AAT15DMiNnNGDT72fUNFS-DgmVmuFVJAks5uw91KgaJpZM4XbLM5
.

Did you move the config from /var/lib/znc to /home/xapim? If so, update the path to the certificate inside the znc.conf вт, 20 нояб. 2018 г. в 10:45, xapim <notifications@github.com>: > sh-4.2$ znc -f > [ .. ] Checking for list of available modules... > [ .. ] Opening config [/home/xapim/.znc/configs/znc.conf]... > [ .. ] Loading global module [webadmin]... > [ .. ] Loading global module [admindebug]... > [ .. ] Loading global module [adminlog]... > [ .. ] Loading global module [chansaver]... > [ .. ] Loading global module [lastseen]... > [ .. ] Loading global module [log]... > [ .. ] Loading global module [notify_connect]... > [ .. ] Loading global module [partyline]... > [ .. ] Binding to port [+59001]... > [ !! ] Unable to locate pem file: /var/lib/znc/.znc/znc.pem > [ ?? ] Would you like to create a new pem file? (yes/no) [yes]: yes > [ .. ] Writing Pem file [/var/lib/znc/.znc/znc.pem]... > [ !! ] Unable to open > [ .. ] Binding to port [+59001]... > [ ** ] Loading user [Just_Pain] > [ .. ] Loading user module [alias]... > [ .. ] Loading user module [autoattach]... > [ .. ] Loading user module [autoreply]... > [ .. ] Loading user module [chansaver]... > [ .. ] Loading user module [clientnotify]... > [ .. ] Loading user module [controlpanel]... > [ .. ] Loading user module [perform]... > [ .. ] Loading user module [raw]... > [ .. ] Loading user module [stripcontrols]... > [ .. ] Loading user module [webadmin]... > [ ** ] Loading user [xapim] > [ ** ] Loading network [Ptnet] > [ .. ] Loading network module [simple_away]... > [ >> ] [/usr/local/lib/znc/simple_away.so] > [ .. ] Loading network module [perform]... > [ >> ] [/usr/local/lib/znc/perform.so] > [ .. ] Adding server [uevora.ptnet.org +6697]... > [ .. ] Loading user module [chansaver]... > [ .. ] Loading user module [controlpanel]... > [ .. ] Loading user module [alias]... > [ .. ] Loading user module [autoattach]... > [ .. ] Loading user module [autoreply]... > [ .. ] Loading user module [clientnotify]... > [ .. ] Loading user module [ctcpflood]... > [ .. ] Loading user module [dcc]... > [ .. ] Loading user module [flooddetach]... > [ .. ] Loading user module [listsockets]... > [ .. ] Loading user module [log]... > [ .. ] Loading user module [notes]... > [ .. ] Loading user module [perform]... > [ .. ] Loading user module [raw]... > [ .. ] Loading user module [shell]... > [ .. ] Loading user module [stripcontrols]... > [ .. ] Loading user module [webadmin]... > [ ** ] Staying open for debugging [pid: 32564] > [ ** ] ZNC 1.7.1 - https://znc.in > > — > You are receiving this because you modified the open/close state. > Reply to this email directly, view it on GitHub > <https://github.com/znc/znc/issues/1609#issuecomment-440228212>, or mute > the thread > <https://github.com/notifications/unsubscribe-auth/AAT15DMiNnNGDT72fUNFS-DgmVmuFVJAks5uw91KgaJpZM4XbLM5> > . > <!-- github-comment-id:440397391 -->

Sign in to join this conversation.

No Branch/Tag Specified

Branches Tags

master

1.10.x

1.9.x

1.8.x

1.7.x

1.6.x

znc-1.10.3

znc-1.10.2

znc-1.10.2-rc1

znc-1.10.1

znc-1.10.1-rc1

znc-1.10.0

znc-1.10.0-rc1

znc-1.9.1

znc-1.9.0

znc-1.9.0-rc1

znc-1.8.2

znc-1.8.2-rc1

znc-1.8.1

znc-1.8.1-rc1

znc-1.8.0

znc-1.7.5

znc-1.7.5-rc1

znc-1.7.4

znc-1.7.4-rc1

znc-1.7.3

znc-1.7.3-rc1

znc-1.7.2

znc-1.7.2-rc1

znc-1.7.1

znc-1.7.1-rc1

znc-1.7.0

znc-1.6.6

znc-1.6.6-rc1

znc-1.6.5

znc-1.6.5-rc1

znc-1.6.4

znc-1.6.4-rc3

znc-1.6.4-rc2

znc-1.6.4-rc1

znc-1.6.3

znc-1.6.3-rc2

znc-1.6.3-rc1

znc-1.6.2

znc-1.6.2-rc1

znc-1.6.1

znc-1.6.1-rc1

znc-1.6.0

znc-1.4

znc-1.2

znc-1.0

znc-0.206

znc-0.204

znc-0.202

znc-0.200

znc-0.098

znc-0.096

znc-0.094

znc-0.092

znc-0.090

znc-0.080

znc-0.078

znc-0.076

znc-0.074

znc-0.072

znc-0.070

znc-0.068

znc-0.066

znc-0.064

znc-0.062

znc-0.060

znc-0.058

znc-0.056

znc-0.054

znc-0.054-rc3

znc-0.054-rc2

znc-0.054-rc1

znc-0.023

znc-0.025

znc-0.027

znc-0.028

znc-0.029

znc-0.030

znc-0.033

znc-0.034

znc-0.035

znc-0.036

znc-0.037

znc-0.038

znc-0.039

znc-0.040

znc-0.041

znc-0.043

znc-0.044

znc-0.045

znc-0.047

znc-0.050

znc-0.052

Labels

No items

No labels

Milestone

No items

No Milestone

Projects

Clear projects

No projects

Assignees

Clear assignees

adam (Adam Wojcieszonek)

No Assignees

1 Participants

Notifications

Subscribe

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: adam/znc#880