adam/pyMC_Repeater
1
0 Fork 0
mirror of https://github.com/pyMC-dev/pyMC_Repeater.git synced 2026-10-30 19:51:59 +01:00
Code Issues 41 Packages Projects Releases Wiki Activity

Not finding the lora HAT?! #4

New Issue
Closed
opened 2026-10-27 09:28:08 +01:00 by adam · 2 comments
adam commented 2026-10-27 09:28:08 +01:00
Owner
Copy link
Copy source

Hi im having a new issue

Raspberry Pi Zero
I got this hat
https://www.amazon.ca/dp/B0C61VK6WQ

I can see the TX0 blinking and the PWR is red. so should be good, got the LORA antenna connected as well.. but i got the GNSS antenna disconnected since i dont plan on using the GPS
Any ideas what could be happening?

Nov 13 01:28:04 meshcore pymc-repeater[1614]: 2025-11-13 01:28:04,576 - RepeaterDaemon - INFO - Initializing radio hardware...
Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,052 - SX1262_wrapper - INFO - SX1262Radio configured: freq=910.5MHz, power=22dBm, sf=7, bw=62.5kHz, pre=17
Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,085 - SX1262_wrapper - ERROR - Failed to initialize SX1262 radio: '[Errno 2] No such file or directory'
Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,089 - RepeaterDaemon - ERROR - Failed to initialize radio hardware: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory
Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,143 - RepeaterDaemon - ERROR - Fatal error: Repeater requires real LoRa hardware
Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last):
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/sx1262_wrapper.py", line 516, in begin
Nov 13 01:28:06 meshcore pymc-repeater[1614]: self.lora.setSpi(self.bus_id, self.cs_id)
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/lora/LoRaRF/SX126x.py", line 475, in setSpi
Nov 13 01:28:06 meshcore pymc-repeater[1614]: spi.open(bus, cs)
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~^^^^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: FileNotFoundError: [Errno 2] No such file or directory
Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception:
Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last):
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/config.py", line 130, in get_radio_for_board
Nov 13 01:28:06 meshcore pymc-repeater[1614]: radio.begin()
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/sx1262_wrapper.py", line 672, in begin
Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError(f"Failed to initialize SX1262 radio: {e}") from e
Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Failed to initialize SX1262 radio: [Errno 2] No such file or directory
Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception:
Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last):
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 46, in initialize
Nov 13 01:28:06 meshcore pymc-repeater[1614]: self.radio = get_radio_for_board(self.config)
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/config.py", line 132, in get_radio_for_board
Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError(f"Failed to initialize SX1262 radio: {e}") from e
Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory
Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception:
Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last):
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 426, in main
Nov 13 01:28:06 meshcore pymc-repeater[1614]: asyncio.run(daemon.run())
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~^^^^^^^^^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/runners.py", line 195, in run
Nov 13 01:28:06 meshcore pymc-repeater[1614]: return runner.run(main)
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/runners.py", line 118, in run
Nov 13 01:28:06 meshcore pymc-repeater[1614]: return self._loop.run_until_complete(task)
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/base_events.py", line 725, in run_until_complete
Nov 13 01:28:06 meshcore pymc-repeater[1614]: return future.result()
Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~^^
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 347, in run
Nov 13 01:28:06 meshcore pymc-repeater[1614]: await self.initialize()
Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 75, in initialize
Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError("Repeater requires real LoRa hardware") from e
Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Repeater requires real LoRa hardware
Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Main process exited, code=exited, status=1/FAILURE
Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Failed with result 'exit-code'.
Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Consumed 7.101s CPU time.

This is my config file


repeater:
  # Node name for logging and identification
  node_name: "auburn-repeater"

  # Geographic location (optional)
  # Latitude in decimal degrees (-90 to 90)
  latitude: 0.0
  # Longitude in decimal degrees (-180 to 180)
  longitude: 0.0

  # Path to identity file (public/private key)
  # If not specified, a new identity will be generated
  identity_file: null

  # Duplicate packet cache TTL in seconds
  cache_ttl: 60

  # Score-based transmission filtering
  # Enable quality-based packet filtering and adaptive delays
  use_score_for_tx: false

  # Score threshold for quality monitoring (future use)
  # Currently reserved for potential future features like dashboard alerts,
  # proactive statistics collection, or advanced filtering strategies.
  # Changing this value has no effect on current packet processing.
  score_threshold: 0.3

  # Automatic advertisement interval in hours
  # The repeater will send an advertisement packet at this interval
  # Set to 0 to disable automatic adverts (manual only via web interface)
  # Range: 0 (disabled) to 24+ hours
  # Recommended: 10 hours for typical deployments
  send_advert_interval_hours: 10

radio:
  # Frequency in Hz (869.618 MHz for EU)
  frequency: 910525000

  # TX power in dBm
  tx_power: 22

  # Bandwidth in Hz (62500 = 62.5 kHz)
  bandwidth: 62500

  # LoRa spreading factor (7-12)
  spreading_factor: 7

  # Coding rate (5-8)
  coding_rate: 5

  # Preamble length in symbols
  preamble_length: 17

  # Sync word (LoRa network ID)
  sync_word: 13380

  # Enable CRC checking
  crc_enabled: true

  # Use implicit header mode
  implicit_header: false

# SX1262 Hardware Configuration
sx1262:
  # SPI bus and chip select
  bus_id: 0
  cs_id: 0

  # GPIO pins (BCM numbering)
  cs_pin: 21
  reset_pin: 18
  busy_pin: 20
  irq_pin: 16

  # TX/RX enable pins (-1 to disable)
  txen_pin: 13
  rxen_pin: 12

  # Waveshare hardware flag
  is_waveshare: true

delays:
  # TX delay factor for flood mode (multiplier)
  tx_delay_factor: 1.0

  # TX delay factor for direct mode (faster)
  direct_tx_delay_factor: 0.5

duty_cycle:
  # Enable/disable duty cycle enforcement
  # Set to false to disable airtime limits
  enforcement_enabled: false

  # Maximum airtime per minute in milliseconds
  max_airtime_per_minute: 3600

logging:
  # Log level: DEBUG, INFO, WARNING, ERROR
  level: INFO

  # Log format
  format: "%(asctime)s - %(name)s - %(levelname)s - %(message)s"```

<!-- github-sync-id:3618932038 -->
Hi im having a new issue Raspberry Pi Zero I got this hat https://www.amazon.ca/dp/B0C61VK6WQ I can see the TX0 blinking and the PWR is red. so should be good, got the LORA antenna connected as well.. but i got the GNSS antenna disconnected since i dont plan on using the GPS Any ideas what could be happening? > Nov 13 01:28:04 meshcore pymc-repeater[1614]: 2025-11-13 01:28:04,576 - RepeaterDaemon - INFO - Initializing radio hardware... > Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,052 - SX1262_wrapper - INFO - SX1262Radio configured: freq=910.5MHz, power=22dBm, sf=7, bw=62.5kHz, pre=17 > Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,085 - SX1262_wrapper - ERROR - Failed to initialize SX1262 radio: '[Errno 2] No such file or directory' > Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,089 - RepeaterDaemon - ERROR - Failed to initialize radio hardware: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory > Nov 13 01:28:06 meshcore pymc-repeater[1614]: 2025-11-13 01:28:06,143 - RepeaterDaemon - ERROR - Fatal error: Repeater requires real LoRa hardware > Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last): > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/sx1262_wrapper.py", line 516, in begin > Nov 13 01:28:06 meshcore pymc-repeater[1614]: self.lora.setSpi(self.bus_id, self.cs_id) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/lora/LoRaRF/SX126x.py", line 475, in setSpi > Nov 13 01:28:06 meshcore pymc-repeater[1614]: spi.open(bus, cs) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~^^^^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: FileNotFoundError: [Errno 2] No such file or directory > Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception: > Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last): > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/config.py", line 130, in get_radio_for_board > Nov 13 01:28:06 meshcore pymc-repeater[1614]: radio.begin() > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/local/lib/python3.13/dist-packages/pymc_core/hardware/sx1262_wrapper.py", line 672, in begin > Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError(f"Failed to initialize SX1262 radio: {e}") from e > Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Failed to initialize SX1262 radio: [Errno 2] No such file or directory > Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception: > Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last): > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 46, in initialize > Nov 13 01:28:06 meshcore pymc-repeater[1614]: self.radio = get_radio_for_board(self.config) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/config.py", line 132, in get_radio_for_board > Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError(f"Failed to initialize SX1262 radio: {e}") from e > Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory > Nov 13 01:28:06 meshcore pymc-repeater[1614]: The above exception was the direct cause of the following exception: > Nov 13 01:28:06 meshcore pymc-repeater[1614]: Traceback (most recent call last): > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 426, in main > Nov 13 01:28:06 meshcore pymc-repeater[1614]: asyncio.run(daemon.run()) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~^^^^^^^^^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/runners.py", line 195, in run > Nov 13 01:28:06 meshcore pymc-repeater[1614]: return runner.run(main) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/runners.py", line 118, in run > Nov 13 01:28:06 meshcore pymc-repeater[1614]: return self._loop.run_until_complete(task) > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/usr/lib/python3.13/asyncio/base_events.py", line 725, in run_until_complete > Nov 13 01:28:06 meshcore pymc-repeater[1614]: return future.result() > Nov 13 01:28:06 meshcore pymc-repeater[1614]: ~~~~~~~~~~~~~^^ > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 347, in run > Nov 13 01:28:06 meshcore pymc-repeater[1614]: await self.initialize() > Nov 13 01:28:06 meshcore pymc-repeater[1614]: File "/opt/pymc_repeater/repeater/main.py", line 75, in initialize > Nov 13 01:28:06 meshcore pymc-repeater[1614]: raise RuntimeError("Repeater requires real LoRa hardware") from e > Nov 13 01:28:06 meshcore pymc-repeater[1614]: RuntimeError: Repeater requires real LoRa hardware > Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Main process exited, code=exited, status=1/FAILURE > Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Failed with result 'exit-code'. > Nov 13 01:28:07 meshcore systemd[1]: pymc-repeater.service: Consumed 7.101s CPU time. This is my config file ```# Default Repeater Configuration repeater: # Node name for logging and identification node_name: "auburn-repeater" # Geographic location (optional) # Latitude in decimal degrees (-90 to 90) latitude: 0.0 # Longitude in decimal degrees (-180 to 180) longitude: 0.0 # Path to identity file (public/private key) # If not specified, a new identity will be generated identity_file: null # Duplicate packet cache TTL in seconds cache_ttl: 60 # Score-based transmission filtering # Enable quality-based packet filtering and adaptive delays use_score_for_tx: false # Score threshold for quality monitoring (future use) # Currently reserved for potential future features like dashboard alerts, # proactive statistics collection, or advanced filtering strategies. # Changing this value has no effect on current packet processing. score_threshold: 0.3 # Automatic advertisement interval in hours # The repeater will send an advertisement packet at this interval # Set to 0 to disable automatic adverts (manual only via web interface) # Range: 0 (disabled) to 24+ hours # Recommended: 10 hours for typical deployments send_advert_interval_hours: 10 radio: # Frequency in Hz (869.618 MHz for EU) frequency: 910525000 # TX power in dBm tx_power: 22 # Bandwidth in Hz (62500 = 62.5 kHz) bandwidth: 62500 # LoRa spreading factor (7-12) spreading_factor: 7 # Coding rate (5-8) coding_rate: 5 # Preamble length in symbols preamble_length: 17 # Sync word (LoRa network ID) sync_word: 13380 # Enable CRC checking crc_enabled: true # Use implicit header mode implicit_header: false # SX1262 Hardware Configuration sx1262: # SPI bus and chip select bus_id: 0 cs_id: 0 # GPIO pins (BCM numbering) cs_pin: 21 reset_pin: 18 busy_pin: 20 irq_pin: 16 # TX/RX enable pins (-1 to disable) txen_pin: 13 rxen_pin: 12 # Waveshare hardware flag is_waveshare: true delays: # TX delay factor for flood mode (multiplier) tx_delay_factor: 1.0 # TX delay factor for direct mode (faster) direct_tx_delay_factor: 0.5 duty_cycle: # Enable/disable duty cycle enforcement # Set to false to disable airtime limits enforcement_enabled: false # Maximum airtime per minute in milliseconds max_airtime_per_minute: 3600 logging: # Log level: DEBUG, INFO, WARNING, ERROR level: INFO # Log format format: "%(asctime)s - %(name)s - %(levelname)s - %(message)s"``` <!-- github-sync-id:3618932038 -->
adam closed this issue 2026-10-27 09:28:08 +01:00
adam commented 2026-10-27 09:28:09 +01:00
Author
Owner
Copy link
Copy source

Swapped the logging to debug and got this:

Nov 13 01:41:05 meshcore systemd[1]: Stopped pymc-repeater.service - pyMC Repeater Daemon.
Nov 13 01:41:05 meshcore systemd[1]: pymc-repeater.service: Consumed 7.028s CPU time.
Nov 13 01:41:05 meshcore systemd[1]: Started pymc-repeater.service - pyMC Repeater Daemon.
Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,813 - asyncio - DEBUG - Using selector: EpollSelector
Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,822 - RepeaterDaemon - INFO - Repeater daemon started
Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,824 - RepeaterDaemon - INFO - Initializing repeater: auburn-repeater
Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,825 - RepeaterDaemon - INFO - Initializing radio hardware...
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,280 - SX1262_wrapper - INFO - SX1262Radio configured: freq=910.5MHz, power=22dBm, sf=7, bw=62.5kHz, pre=17
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,285 - SX1262_wrapper - DEBUG - Initializing SX1262 radio...
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,315 - SX1262_wrapper - DEBUG - [RX] IRQ setup successful on pin 16
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,318 - SX1262_wrapper - ERROR - Failed to initialize SX1262 radio: '[Errno 2] No such file or directory'
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,321 - RepeaterDaemon - ERROR - Failed to initialize radio hardware: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory
Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,375 - RepeaterDaemon - ERROR - Fatal error: Repeater requires real LoRa hardware
Nov 13 01:41:18 meshcore pymc-repeater[1944]: Traceback (most recent call last):

Swapped the logging to debug and got this: > Nov 13 01:41:05 meshcore systemd[1]: Stopped pymc-repeater.service - pyMC Repeater Daemon. > Nov 13 01:41:05 meshcore systemd[1]: pymc-repeater.service: Consumed 7.028s CPU time. > Nov 13 01:41:05 meshcore systemd[1]: Started pymc-repeater.service - pyMC Repeater Daemon. > Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,813 - asyncio - DEBUG - Using selector: EpollSelector > Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,822 - RepeaterDaemon - INFO - Repeater daemon started > Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,824 - RepeaterDaemon - INFO - Initializing repeater: auburn-repeater > Nov 13 01:41:16 meshcore pymc-repeater[1944]: 2025-11-13 01:41:16,825 - RepeaterDaemon - INFO - Initializing radio hardware... > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,280 - SX1262_wrapper - INFO - SX1262Radio configured: freq=910.5MHz, power=22dBm, sf=7, bw=62.5kHz, pre=17 > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,285 - SX1262_wrapper - DEBUG - Initializing SX1262 radio... > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,315 - SX1262_wrapper - DEBUG - [RX] IRQ setup successful on pin 16 > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,318 - SX1262_wrapper - ERROR - Failed to initialize SX1262 radio: '[Errno 2] No such file or directory' > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,321 - RepeaterDaemon - ERROR - Failed to initialize radio hardware: Failed to initialize SX1262 radio: Failed to initialize SX1262 radio: [Errno 2] No such file or directory > Nov 13 01:41:18 meshcore pymc-repeater[1944]: 2025-11-13 01:41:18,375 - RepeaterDaemon - ERROR - Fatal error: Repeater requires real LoRa hardware > Nov 13 01:41:18 meshcore pymc-repeater[1944]: Traceback (most recent call last): <!-- github-comment-id:3524735693 -->
adam commented 2026-10-27 09:28:10 +01:00
Author
Owner
Copy link
Copy source

Hey! Have you enabled spi via
sudo rasp-config

Thanks

Come join us on discord might be quicker

https://discord.com/channels/1343693475589263471/1431414286974189639

Hey! Have you enabled spi via sudo rasp-config Thanks Come join us on discord might be quicker https://discord.com/channels/1343693475589263471/1431414286974189639 <!-- github-comment-id:3529206064 -->
Sign in to join this conversation.
No Branch/Tag Specified
Labels
No items
No labels
Milestone
No items
No Milestone
Projects
Clear projects
No projects
Assignees
Clear assignees
adam (Adam Wojcieszonek)
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: adam/pyMC_Repeater#4