OpenHop treats max_flood_hops 0 as unlimited while firmware's flood.max 0
forwards nothing — the inverse. Until that edge is decided alongside the
policy-engine flood caps, say so in the help so a firmware-habituated
admin does not set 0 expecting to disable forwarding (that is what
'set repeat off' is for) and silently get unlimited flooding instead.
Firmware rejects rxdelay outside 0-20 and txdelay/direct.txdelay outside
0-2.0; the CLI only rejected negatives, so a remote admin could set
delay factors far beyond what any firmware node would accept. Apply the
firmware ranges with the firmware error strings and state the ranges in
the help text. Existing configs with out-of-range values are untouched —
only new CLI sets are gated. Also adds an end-to-end regression test
running every set command against the real ConfigManager on a temp
config file.
set flood.advert.interval wrote flood_advert_interval_hours, a key
nothing reads, and get reported it with a default of 24 — the engine's
flood-advert timer (and the web API) consume send_advert_interval_hours
with a default of 10. Read and write the consumed key so the remote
command actually reschedules the timer; the orphan key is left in place
and ignored.
set freq and set radio stored the CLI's MHz/kHz inputs directly into
radio.frequency and radio.bandwidth, which the rest of the stack treats
as Hz — a freq change tuned the radio to a few hundred hertz. Convert to
Hz on write and validate set radio with the firmware gate (freq 150-2500,
bw 7-500, sf 5-12, cr 5-8, same error string; set freq stays unvalidated
like firmware). Radio changes are now saved without a live apply so the
reply's restart-to-apply contract is real: a live retune would cut off
the remote admin mid-session, and the all-or-nothing live radio path
would also have dragged staged frequency changes along with a tx tweak.
The password, guest.password, and allow.read.only commands wrote a
top-level security section with a stale key name, while LoginHelper
authenticates from repeater.security.admin_password/.guest_password/
.allow_read_only — so remote password changes never took effect. Point
the set and get commands at the real subtree, and push repeater.security
onto the live repeater ACL during a repeater-section live update: the
ACL captures its passwords at registration, so without the refresh a
saved change would still only apply after a restart. Room-server ACLs
keep their per-identity settings passwords.
ConfigManager.save_to_file returns a bare bool, but every mesh CLI set
command (and the password command) still tuple-unpacked it, so each one
wrote the YAML and then raised, skipping the live update and returning an
error to the remote admin. Route every save through one helper that
checks the bool, reports save failures honestly, and only live-applies
after a successful write. The test fixture mocked the stale tuple shape,
which is why the suite stayed green while the CLI was broken on the real
manager.
The mesh CLI's get/set txdelay and direct.txdelay read and wrote
repeater.tx_delay_factor / repeater.direct_tx_delay_factor, but the
engine and web API use the delays section, so the CLI knobs were
silently dead: set appeared to succeed while changing nothing, and get
echoed the unused value back. Same defect and same fix as the recent
rxdelay repoint.
The delays.rx_delay_base config value was stored and reported but never
applied. Now that the core dispatcher implements MeshCore's flood
reception-quality delay, feed it through:
- set dispatcher.rx_delay_base from delays.rx_delay_base at startup and
re-apply it on live config updates of the delays section (web API
saves already pass that section)
- point the mesh CLI get/set rxdelay at the delays section; it read and
wrote repeater.rx_delay_base, which nothing consumes, so the CLI knob
was silently dead
- delegate RepeaterHandler.calculate_packet_score to the shared core
packet_score (same firmware packetScoreInt formula, one impl)
Suppression works through the existing engine seen-cache because it
dedupes at process time, after the dispatcher hold. Default remains 0
(delay disabled), matching firmware.
standardize default region on mesh.default_region (remove legacy region_default_scope usage)
add/align CLI support for owner.info, path.hash.mode, and loop.detect with validation
wire UI terminal get/set + autocomplete/help for owner.info, path.hash.mode, loop.detect
extend update_radio_config to persist owner_info for UI set owner.info
add and use shared packet utility for advert creation + default-region transport scoping
refactor repeater and room-server advert paths to reuse shared packet logic
- Changed blank-password login behavior to create/manage guest sessions (when read-only is enabled), including replay protection and session timestamp tracking.
- Preserved and centralized `sync_since` handling during successful auth/session updates.
- Updated login handling to return explicit `(success, permissions)` and reset room-server sync guard state in SQLite on successful room-server login.
- Updated identity/banner output in mesh CLI from `pyMC_*` to `openHop_*` and adjusted default version fallback.
- Extended path handling to support encoded path-length semantics via `PathUtils`, with legacy fallback support for older/malformed packets.
- Added bundled ACK extraction from PATH payload extras and callback-based ACK propagation.
- Hardened room-server push logic: max-failure early skip, corrected expected ACK CRC calculation, path encoding compatibility, persisted sync/last-activity fields, and passed expected CRC + timeout into packet injection.
- Enhanced packet router ACK flow with dispatcher ACK registration helper, support for multipart ACK wrapper handling, configurable ACK wait timeout/CRC in injection, and ensured PATH helper processing always runs.
- Updated daemon wiring to pass ACK callback into `PathHelper`,
- make dispatcher dedupe configurable (prevent dbl deduping), and only register duplicate logging hook when dedupe is enabled.
- Expanded tests to cover guest blank-password replay tracking, updated room-server injector ACK expectations, and new duplicate-logging-hook gating behavior.
- Updated byte representations in tests to use lowercase hex format for consistency.
- Reformatted code for better readability, including line breaks and indentation adjustments.
- Consolidated multiple lines into single lines where appropriate to enhance clarity.
- Ensured that all test cases maintain consistent formatting and style across the test suite.
- Modify TX modes: forward, monitor, and add no_tx, allowing for flexible packet handling.
- Updated configuration and API endpoints to support the new modes.
- Adjusted logic in RepeaterHandler to manage packet processing based on the selected mode.
- Enhanced CLI commands to reflect the new mode settings.
- Added tests for each TX mode to ensure correct behavior.
- Add repeater/companion with frame server and constants
- Extend config, sqlite_handler, mesh_cli, packet_router for companion
- Update api_endpoints and auth_endpoints; adjust main entry
Co-authored-by: Cursor <cursoragent@cursor.com>
agessaman