Added Chanels don't endure reboot #267

New Issue

2026-10-27T15:46:49+01:00

adam commented

2026-10-27 15:46:49 +01:00

Describe the bug
Added the Yorkshire channel a number of times but disappears on reboot

Which device are you using
LilyGO T-Deck
LilyGO T-deck plus

Which Firmware are you using 0.9.12.1

To Reproduce
Steps to reproduce the behavior:

Add new channel then apply then reboot no longer on the channels page

Additional context
Add any other context about the problem here.

I'm saving date on the ad card but the added channel doesn't endure a reboot

**Describe the bug** Added the Yorkshire channel a number of times but disappears on reboot **Which device are you using** LilyGO T-Deck LilyGO T-deck plus **Which Firmware are you using** 0.9.12.1 **To Reproduce** Steps to reproduce the behavior: Add new channel then apply then reboot no longer on the channels page **Additional context** Add any other context about the problem here. I'm saving date on the ad card but the added channel doesn't endure a reboot

adam closed this issue

2026-10-27 15:46:49 +01:00

adam commented

2026-10-27 15:46:50 +01:00

What are you using as Storage? Internal or Sdcard in Mgmt / Global - storage

What are you using as Storage? Internal or Sdcard in Mgmt / Global - storage

adam commented

2026-10-27 15:46:51 +01:00

hallo Bernhard, ich benutze die SD karte.

gruss

martin

hallo Bernhard, ich benutze die SD karte. gruss martin

adam commented

2026-10-27 15:46:51 +01:00

hallo Bernhard, ich benutze die SD karte.

Thank you, Martin.
Preparing right now a HotFix to solve that ugly issue -.

> hallo Bernhard, ich benutze die SD karte. Thank you, Martin. Preparing right now a HotFix to solve that ugly issue -.

adam commented

2026-10-27 15:46:52 +01:00

Fixed (v0.9.12.2) HotFix

Channels lost after reboot when primary storage is the SD card (channels were written to internal flash but loaded from SD).

### Fixed (v0.9.12.2) HotFix - **Channels lost after reboot** when primary storage is the SD card (channels were written to internal flash but loaded from SD).

adam commented

2026-10-27 15:46:53 +01:00

still not working after reboot memory changed over to sd card for the primary disk added channel doesnt endure a reboot

still not working after reboot memory changed over to sd card for the primary disk added channel doesnt endure a reboot

adam commented

2026-10-27 15:46:53 +01:00

Hallo Bernhard
wenn ich die Bin datei vom Indicator auf dier Sd karte kopieren würde hat es da ein immage was die sd karte erkennen kann um dann das update installieren zu können, oder gibt es auch eine automatische version wenn der indikator über wifi betrieben wird?

Hallo Bernhard wenn ich die Bin datei vom Indicator auf dier Sd karte kopieren würde hat es da ein immage was die sd karte erkennen kann um dann das update installieren zu können, oder gibt es auch eine automatische version wenn der indikator über wifi betrieben wird?

adam commented

2026-10-27 15:46:54 +01:00

On my device, the channels persist a reboot.

On my device, the channels persist a reboot.

adam commented

2026-10-27 15:46:54 +01:00

wenn ich die Bin datei vom Indicator auf dier Sd karte kopieren würde hat es da ein immage was die sd karte erkennen kann um dann das update installieren zu können, oder gibt es auch eine automatische version wenn der indikator über wifi betrieben wird?

Actually this is not working, but it sounds like a good idea to have this possibillity. I will take it on my list 🤗

> wenn ich die Bin datei vom Indicator auf dier Sd karte kopieren würde hat es da ein immage was die sd karte erkennen kann um dann das update installieren zu können, oder gibt es auch eine automatische version wenn der indikator über wifi betrieben wird? Actually this is not working, but it sounds like a good idea to have this possibillity. I will take it on my list 🤗

adam commented

2026-10-27 15:46:55 +01:00

hi Bernhard
i have an problem for the update with the RAK2040, How do I do that? You can't do that with the MeshCore flash, can you? Sorry, I'm still a bit of a novice 🙈🤣

hi Bernhard i have an problem for the update with the RAK2040, How do I do that? You can't do that with the MeshCore flash, can you? Sorry, I'm still a bit of a novice 🙈🤣

adam commented

2026-10-27 15:46:56 +01:00

hi Bernhard i have an problem for the update with the RAK2040, How do I do that? You can't do that with the MeshCore flash, can you? Sorry, I'm still a bit of a novice 🙈🤣

Seems like you mean RP2040. One of the guys was explaining it very easy:
Put Indicator in bootloader mode by using a paper clip and pressing the internal button behind the little hole in the bottom while plugging in the USB cable. This will produce a disk drive that you copy the .uf2 file to then the Indicator will remove the drive (reboots the RP2040)

That will solve your issue and bring new features (sounds, sdcard support) to indicator👌

Btw. Wiki -> User-Guide (Ai gen) knows now flashing part: https://github.com/dabeani/meshcoreterm/wiki/UserGuide-(Ai-Gen)#22-flashing-firmware

> hi Bernhard i have an problem for the update with the RAK2040, How do I do that? You can't do that with the MeshCore flash, can you? Sorry, I'm still a bit of a novice 🙈🤣 Seems like you mean RP2040. One of the guys was explaining it very easy: Put Indicator in bootloader mode by using a paper clip and pressing the internal button behind the little hole in the bottom while plugging in the USB cable. This will produce a disk drive that you copy the .uf2 file to then the Indicator will remove the drive (reboots the RP2040) That will solve your issue and bring new features (sounds, sdcard support) to indicator👌 Btw. Wiki -> User-Guide (Ai gen) knows now flashing part: https://github.com/dabeani/meshcoreterm/wiki/UserGuide-(Ai-Gen)#22-flashing-firmware

adam referenced this issue

2026-10-27 15:48:45 +01:00

Load private key from SD card does not survive reboot. #306

Sign in to join this conversation.

1 Participants

Notifications

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: adam/meshcore#267