# MeshCore Stats Configuration
# Copy this file to meshcore.conf and customize for your setup:
#   cp meshcore.conf.example meshcore.conf
#
# This file is automatically loaded by the scripts. No need to source it manually.
# Environment variables always take precedence over this file (useful for Docker).

# =============================================================================
# Connection Settings
# =============================================================================

export MESH_TRANSPORT=serial
export MESH_SERIAL_PORT=/dev/ttyUSB0      # Adjust for your system (e.g., /dev/ttyACM0, /dev/cu.usbserial-*)
export MESH_SERIAL_BAUD=115200
export MESH_DEBUG=0                        # Set to 1 for verbose meshcore debug output

# =============================================================================
# Remote Repeater Identity
# =============================================================================
# At least REPEATER_NAME or REPEATER_KEY_PREFIX is required to identify your repeater

export REPEATER_NAME="Your Repeater Name"  # Advertised name shown in contacts
# export REPEATER_KEY_PREFIX="a1b2c3"      # Alternative: hex prefix of public key
export REPEATER_PASSWORD="your-password"   # Admin password for repeater login

# =============================================================================
# Display Names (shown in UI)
# =============================================================================

export REPEATER_DISPLAY_NAME="My Repeater"
export COMPANION_DISPLAY_NAME="My Companion"

# Public key prefixes (shown below node name in sidebar, e.g., "!a1b2c3d4")
# export REPEATER_PUBKEY_PREFIX="!a1b2c3d4"
# export COMPANION_PUBKEY_PREFIX="!e5f6g7h8"

# =============================================================================
# Location Metadata (for reports and sidebar display)
# =============================================================================

export REPORT_LOCATION_NAME="City, Country"      # Full location name for reports
export REPORT_LOCATION_SHORT="City, XX"          # Short version for sidebar/meta
export REPORT_LAT=0.0                            # Latitude in decimal degrees
export REPORT_LON=0.0                            # Longitude in decimal degrees
export REPORT_ELEV=0                             # Elevation
export REPORT_ELEV_UNIT=m                        # "m" for meters, "ft" for feet

# =============================================================================
# Hardware Info (shown in sidebar)
# =============================================================================

export REPEATER_HARDWARE="Your Repeater Model"   # e.g., "SenseCAP P1-Pro", "LILYGO T-Beam"
export COMPANION_HARDWARE="Your Companion Model" # e.g., "Elecrow ThinkNode-M1", "Heltec V3"

# =============================================================================
# Radio Configuration Presets
# =============================================================================
# Uncomment ONE preset below that matches your MeshCore configuration,
# or set custom values. These are for display purposes only.

# MeshCore EU/UK Narrow (default)
export RADIO_FREQUENCY="869.618 MHz"
export RADIO_BANDWIDTH="62.5 kHz"
export RADIO_SPREAD_FACTOR="SF8"
export RADIO_CODING_RATE="CR8"

# # MeshCore EU/UK Wide
# export RADIO_FREQUENCY="869.525 MHz"
# export RADIO_BANDWIDTH="250 kHz"
# export RADIO_SPREAD_FACTOR="SF10"
# export RADIO_CODING_RATE="CR5"

# # MeshCore US Standard
# export RADIO_FREQUENCY="906.875 MHz"
# export RADIO_BANDWIDTH="250 kHz"
# export RADIO_SPREAD_FACTOR="SF10"
# export RADIO_CODING_RATE="CR5"

# # MeshCore US Fast
# export RADIO_FREQUENCY="906.875 MHz"
# export RADIO_BANDWIDTH="500 kHz"
# export RADIO_SPREAD_FACTOR="SF7"
# export RADIO_CODING_RATE="CR5"

# # MeshCore ANZ (Australia/New Zealand)
# export RADIO_FREQUENCY="917.0 MHz"
# export RADIO_BANDWIDTH="250 kHz"
# export RADIO_SPREAD_FACTOR="SF10"
# export RADIO_CODING_RATE="CR5"

# =============================================================================
# Intervals and Timeouts
# =============================================================================

export COMPANION_STEP=60                   # Collection interval for companion (seconds)
export REPEATER_STEP=900                   # Collection interval for repeater (seconds, 15min default)
export REMOTE_TIMEOUT_S=10                 # Minimum timeout for LoRa requests
export REMOTE_RETRY_ATTEMPTS=2             # Number of retry attempts
export REMOTE_RETRY_BACKOFF_S=4            # Seconds between retries

# Circuit breaker settings (prevents spamming LoRa when repeater is unreachable)
export REMOTE_CB_FAILS=6                   # Failures before circuit breaker opens
export REMOTE_CB_COOLDOWN_S=3600           # Cooldown period in seconds (1 hour)

# =============================================================================
# Paths
# =============================================================================

export STATE_DIR=./data/state              # SQLite database and circuit breaker state
export OUT_DIR=./out                       # Generated static site output

# =============================================================================
# Optional
# =============================================================================

export REPEATER_FETCH_ACL=0                # Set to 1 to fetch ACL from repeater