';
+ nSizer.style.width = footerWidths[i];
+ }, footerSrcEls );
+ }
+
+ // Sanity check that the table is of a sensible width. If not then we are going to get
+ // misalignment - try to prevent this by not allowing the table to shrink below its min width
+ if ( table.outerWidth() < sanityWidth )
+ {
+ // The min width depends upon if we have a vertical scrollbar visible or not */
+ correction = ((divBodyEl.scrollHeight > divBodyEl.offsetHeight ||
+ divBody.css('overflow-y') == "scroll")) ?
+ sanityWidth+barWidth :
+ sanityWidth;
+
+ // IE6/7 are a law unto themselves...
+ if ( ie67 && (divBodyEl.scrollHeight >
+ divBodyEl.offsetHeight || divBody.css('overflow-y') == "scroll")
+ ) {
+ tableStyle.width = _fnStringToCss( correction-barWidth );
+ }
+
+ // And give the user a warning that we've stopped the table getting too small
+ if ( scrollX === "" || scrollXInner !== "" ) {
+ _fnLog( settings, 1, 'Possible column misalignment', 6 );
+ }
+ }
+ else
+ {
+ correction = '100%';
+ }
+
+ // Apply to the container elements
+ divBodyStyle.width = _fnStringToCss( correction );
+ divHeaderStyle.width = _fnStringToCss( correction );
+
+ if ( footer ) {
+ settings.nScrollFoot.style.width = _fnStringToCss( correction );
+ }
+
+
+ /*
+ * 4. Clean up
+ */
+ if ( ! scrollY ) {
+ /* IE7< puts a vertical scrollbar in place (when it shouldn't be) due to subtracting
+ * the scrollbar height from the visible display, rather than adding it on. We need to
+ * set the height in order to sort this. Don't want to do it in any other browsers.
+ */
+ if ( ie67 ) {
+ divBodyStyle.height = _fnStringToCss( tableEl.offsetHeight+barWidth );
+ }
+ }
+
+ /* Finally set the width's of the header and footer tables */
+ var iOuterWidth = table.outerWidth();
+ divHeaderTable[0].style.width = _fnStringToCss( iOuterWidth );
+ divHeaderInnerStyle.width = _fnStringToCss( iOuterWidth );
+
+ // Figure out if there are scrollbar present - if so then we need a the header and footer to
+ // provide a bit more space to allow "overflow" scrolling (i.e. past the scrollbar)
+ var bScrolling = table.height() > divBodyEl.clientHeight || divBody.css('overflow-y') == "scroll";
+ var padding = 'padding' + (browser.bScrollbarLeft ? 'Left' : 'Right' );
+ divHeaderInnerStyle[ padding ] = bScrolling ? barWidth+"px" : "0px";
+
+ if ( footer ) {
+ divFooterTable[0].style.width = _fnStringToCss( iOuterWidth );
+ divFooterInner[0].style.width = _fnStringToCss( iOuterWidth );
+ divFooterInner[0].style[padding] = bScrolling ? barWidth+"px" : "0px";
+ }
+
+ // Correct DOM ordering for colgroup - comes before the thead
+ table.children('colgroup').insertBefore( table.children('thead') );
+
+ /* Adjust the position of the header in case we loose the y-scrollbar */
+ divBody.scroll();
+
+ // If sorting or filtering has occurred, jump the scrolling back to the top
+ // only if we aren't holding the position
+ if ( (settings.bSorted || settings.bFiltered) && ! settings._drawHold ) {
+ divBodyEl.scrollTop = 0;
+ }
+ }
+
+
+
+ /**
+ * Apply a given function to the display child nodes of an element array (typically
+ * TD children of TR rows
+ * @param {function} fn Method to apply to the objects
+ * @param array {nodes} an1 List of elements to look through for display children
+ * @param array {nodes} an2 Another list (identical structure to the first) - optional
+ * @memberof DataTable#oApi
+ */
+ function _fnApplyToChildren( fn, an1, an2 )
+ {
+ var index=0, i=0, iLen=an1.length;
+ var nNode1, nNode2;
+
+ while ( i < iLen ) {
+ nNode1 = an1[i].firstChild;
+ nNode2 = an2 ? an2[i].firstChild : null;
+
+ while ( nNode1 ) {
+ if ( nNode1.nodeType === 1 ) {
+ if ( an2 ) {
+ fn( nNode1, nNode2, index );
+ }
+ else {
+ fn( nNode1, index );
+ }
+
+ index++;
+ }
+
+ nNode1 = nNode1.nextSibling;
+ nNode2 = an2 ? nNode2.nextSibling : null;
+ }
+
+ i++;
+ }
+ }
+
+
+
+ var __re_html_remove = /<.*?>/g;
+
+
+ /**
+ * Calculate the width of columns for the table
+ * @param {object} oSettings dataTables settings object
+ * @memberof DataTable#oApi
+ */
+ function _fnCalculateColumnWidths ( oSettings )
+ {
+ var
+ table = oSettings.nTable,
+ columns = oSettings.aoColumns,
+ scroll = oSettings.oScroll,
+ scrollY = scroll.sY,
+ scrollX = scroll.sX,
+ scrollXInner = scroll.sXInner,
+ columnCount = columns.length,
+ visibleColumns = _fnGetColumns( oSettings, 'bVisible' ),
+ headerCells = $('th', oSettings.nTHead),
+ tableWidthAttr = table.getAttribute('width'), // from DOM element
+ tableContainer = table.parentNode,
+ userInputs = false,
+ i, column, columnIdx, width, outerWidth,
+ browser = oSettings.oBrowser,
+ ie67 = browser.bScrollOversize;
+
+ var styleWidth = table.style.width;
+ if ( styleWidth && styleWidth.indexOf('%') !== -1 ) {
+ tableWidthAttr = styleWidth;
+ }
+
+ /* Convert any user input sizes into pixel sizes */
+ for ( i=0 ; i').appendTo( tmpTable.find('tbody') );
+
+ // Clone the table header and footer - we can't use the header / footer
+ // from the cloned table, since if scrolling is active, the table's
+ // real header and footer are contained in different table tags
+ tmpTable.find('thead, tfoot').remove();
+ tmpTable
+ .append( $(oSettings.nTHead).clone() )
+ .append( $(oSettings.nTFoot).clone() );
+
+ // Remove any assigned widths from the footer (from scrolling)
+ tmpTable.find('tfoot th, tfoot td').css('width', '');
+
+ // Apply custom sizing to the cloned header
+ headerCells = _fnGetUniqueThs( oSettings, tmpTable.find('thead')[0] );
+
+ for ( i=0 ; i').css( {
+ width: column.sWidthOrig,
+ margin: 0,
+ padding: 0,
+ border: 0,
+ height: 1
+ } ) );
+ }
+ }
+
+ // Find the widest cell for each column and put it into the table
+ if ( oSettings.aoData.length ) {
+ for ( i=0 ; i').css( scrollX || scrollY ?
+ {
+ position: 'absolute',
+ top: 0,
+ left: 0,
+ height: 1,
+ right: 0,
+ overflow: 'hidden'
+ } :
+ {}
+ )
+ .append( tmpTable )
+ .appendTo( tableContainer );
+
+ // When scrolling (X or Y) we want to set the width of the table as
+ // appropriate. However, when not scrolling leave the table width as it
+ // is. This results in slightly different, but I think correct behaviour
+ if ( scrollX && scrollXInner ) {
+ tmpTable.width( scrollXInner );
+ }
+ else if ( scrollX ) {
+ tmpTable.css( 'width', 'auto' );
+ tmpTable.removeAttr('width');
+
+ // If there is no width attribute or style, then allow the table to
+ // collapse
+ if ( tmpTable.width() < tableContainer.clientWidth && tableWidthAttr ) {
+ tmpTable.width( tableContainer.clientWidth );
+ }
+ }
+ else if ( scrollY ) {
+ tmpTable.width( tableContainer.clientWidth );
+ }
+ else if ( tableWidthAttr ) {
+ tmpTable.width( tableWidthAttr );
+ }
+
+ // Get the width of each column in the constructed table - we need to
+ // know the inner width (so it can be assigned to the other table's
+ // cells) and the outer width so we can calculate the full width of the
+ // table. This is safe since DataTables requires a unique cell for each
+ // column, but if ever a header can span multiple columns, this will
+ // need to be modified.
+ var total = 0;
+ for ( i=0 ; i')
+ .css( 'width', _fnStringToCss( width ) )
+ .appendTo( parent || document.body );
+
+ var val = n[0].offsetWidth;
+ n.remove();
+
+ return val;
+ }
+
+
+ /**
+ * Get the widest node
+ * @param {object} settings dataTables settings object
+ * @param {int} colIdx column of interest
+ * @returns {node} widest table node
+ * @memberof DataTable#oApi
+ */
+ function _fnGetWidestNode( settings, colIdx )
+ {
+ var idx = _fnGetMaxLenString( settings, colIdx );
+ if ( idx < 0 ) {
+ return null;
+ }
+
+ var data = settings.aoData[ idx ];
+ return ! data.nTr ? // Might not have been created when deferred rendering
+ $('
').html( _fnGetCellData( settings, idx, colIdx, 'display' ) )[0] :
+ data.anCells[ colIdx ];
+ }
+
+
+ /**
+ * Get the maximum strlen for each data column
+ * @param {object} settings dataTables settings object
+ * @param {int} colIdx column of interest
+ * @returns {string} max string length for each column
+ * @memberof DataTable#oApi
+ */
+ function _fnGetMaxLenString( settings, colIdx )
+ {
+ var s, max=-1, maxIdx = -1;
+
+ for ( var i=0, ien=settings.aoData.length ; i max ) {
+ max = s.length;
+ maxIdx = i;
+ }
+ }
+
+ return maxIdx;
+ }
+
+
+ /**
+ * Append a CSS unit (only if required) to a string
+ * @param {string} value to css-ify
+ * @returns {string} value with css unit
+ * @memberof DataTable#oApi
+ */
+ function _fnStringToCss( s )
+ {
+ if ( s === null ) {
+ return '0px';
+ }
+
+ if ( typeof s == 'number' ) {
+ return s < 0 ?
+ '0px' :
+ s+'px';
+ }
+
+ // Check it has a unit character already
+ return s.match(/\d$/) ?
+ s+'px' :
+ s;
+ }
+
+
+
+ function _fnSortFlatten ( settings )
+ {
+ var
+ i, iLen, k, kLen,
+ aSort = [],
+ aiOrig = [],
+ aoColumns = settings.aoColumns,
+ aDataSort, iCol, sType, srcCol,
+ fixed = settings.aaSortingFixed,
+ fixedObj = $.isPlainObject( fixed ),
+ nestedSort = [],
+ add = function ( a ) {
+ if ( a.length && ! $.isArray( a[0] ) ) {
+ // 1D array
+ nestedSort.push( a );
+ }
+ else {
+ // 2D array
+ $.merge( nestedSort, a );
+ }
+ };
+
+ // Build the sort array, with pre-fix and post-fix options if they have been
+ // specified
+ if ( $.isArray( fixed ) ) {
+ add( fixed );
+ }
+
+ if ( fixedObj && fixed.pre ) {
+ add( fixed.pre );
+ }
+
+ add( settings.aaSorting );
+
+ if (fixedObj && fixed.post ) {
+ add( fixed.post );
+ }
+
+ for ( i=0 ; i=0 ; i-- )
- {
- aRet.push( aoStore[i].fn.apply( oSettings.oInstance, aArgs ) );
+
+ return aSort;
+ }
+
+ /**
+ * Change the order of the table
+ * @param {object} oSettings dataTables settings object
+ * @memberof DataTable#oApi
+ * @todo This really needs split up!
+ */
+ function _fnSort ( oSettings )
+ {
+ var
+ i, ien, iLen, j, jLen, k, kLen,
+ sDataType, nTh,
+ aiOrig = [],
+ oExtSort = DataTable.ext.type.order,
+ aoData = oSettings.aoData,
+ aoColumns = oSettings.aoColumns,
+ aDataSort, data, iCol, sType, oSort,
+ formatters = 0,
+ sortCol,
+ displayMaster = oSettings.aiDisplayMaster,
+ aSort;
+
+ // Resolve any column types that are unknown due to addition or invalidation
+ // @todo Can this be moved into a 'data-ready' handler which is called when
+ // data is going to be used in the table?
+ _fnColumnTypes( oSettings );
+
+ aSort = _fnSortFlatten( oSettings );
+
+ for ( i=0, ien=aSort.length ; i'+
- '
'+
- ''+
- '
'+
- '')[0];
-
- document.body.appendChild( n );
- oSettings.oBrowser.bScrollOversize = $('#DT_BrowserTest', n)[0].offsetWidth === 100 ? true : false;
- document.body.removeChild( n );
+ if ( formatters === aSort.length ) {
+ // All sort types have formatting functions
+ displayMaster.sort( function ( a, b ) {
+ var
+ x, y, k, test, sort,
+ len=aSort.length,
+ dataA = aoData[a]._aSortData,
+ dataB = aoData[b]._aSortData;
+
+ for ( k=0 ; ky ? 1 : 0;
+ if ( test !== 0 ) {
+ return sort.dir === 'asc' ? test : -test;
+ }
+ }
+
+ x = aiOrig[a];
+ y = aiOrig[b];
+ return xy ? 1 : 0;
+ } );
+ }
+ else {
+ // Depreciated - remove in 1.11 (providing a plug-in option)
+ // Not all sort types have formatting methods, so we have to call their sorting
+ // methods.
+ displayMaster.sort( function ( a, b ) {
+ var
+ x, y, k, l, test, sort, fn,
+ len=aSort.length,
+ dataA = aoData[a]._aSortData,
+ dataB = aoData[b]._aSortData;
+
+ for ( k=0 ; ky ? 1 : 0;
+ } );
+ }
}
-
+
+ /* Tell the draw function that we have sorted the data */
+ oSettings.bSorted = true;
+ }
+
+
+ function _fnSortAria ( settings )
+ {
+ var label;
+ var nextSort;
+ var columns = settings.aoColumns;
+ var aSort = _fnSortFlatten( settings );
+ var oAria = settings.oLanguage.oAria;
+
+ // ARIA attributes - need to loop all columns, to update all (removing old
+ // attributes as needed)
+ for ( var i=0, iLen=columns.length ; i/g, "" );
+ var th = col.nTh;
+
+ // IE7 is throwing an error when setting these properties with jQuery's
+ // attr() and removeAttr() methods...
+ th.removeAttribute('aria-sort');
+
+ /* In ARIA only the first sorting column can be marked as sorting - no multi-sort option */
+ if ( col.bSortable ) {
+ if ( aSort.length > 0 && aSort[0].col == i ) {
+ th.setAttribute('aria-sort', aSort[0].dir=="asc" ? "ascending" : "descending" );
+ nextSort = asSorting[ aSort[0].index+1 ] || asSorting[0];
+ }
+ else {
+ nextSort = asSorting[0];
+ }
+
+ label = sTitle + ( nextSort === "asc" ?
+ oAria.sSortAscending :
+ oAria.sSortDescending
+ );
+ }
+ else {
+ label = sTitle;
+ }
+
+ th.setAttribute('aria-label', label);
+ }
+ }
+
+
+ /**
+ * Function to run on user sort request
+ * @param {object} settings dataTables settings object
+ * @param {node} attachTo node to attach the handler to
+ * @param {int} colIdx column sorting index
+ * @param {boolean} [append=false] Append the requested sort to the existing
+ * sort if true (i.e. multi-column sort)
+ * @param {function} [callback] callback function
+ * @memberof DataTable#oApi
+ */
+ function _fnSortListener ( settings, colIdx, append, callback )
+ {
+ var col = settings.aoColumns[ colIdx ];
+ var sorting = settings.aaSorting;
+ var asSorting = col.asSorting;
+ var nextSortIdx;
+ var next = function ( a, overflow ) {
+ var idx = a._idx;
+ if ( idx === undefined ) {
+ idx = $.inArray( a[1], asSorting );
+ }
+
+ return idx+1 < asSorting.length ?
+ idx+1 :
+ overflow ?
+ null :
+ 0;
+ };
+
+ // Convert to 2D array if needed
+ if ( typeof sorting[0] === 'number' ) {
+ sorting = settings.aaSorting = [ sorting ];
+ }
+
+ // If appending the sort then we are multi-column sorting
+ if ( append && settings.oFeatures.bSortMulti ) {
+ // Are we already doing some kind of sort on this column?
+ var sortIdx = $.inArray( colIdx, _pluck(sorting, '0') );
+
+ if ( sortIdx !== -1 ) {
+ // Yes, modify the sort
+ nextSortIdx = next( sorting[sortIdx], true );
+
+ if ( nextSortIdx === null && sorting.length === 1 ) {
+ nextSortIdx = 0; // can't remove sorting completely
+ }
+
+ if ( nextSortIdx === null ) {
+ sorting.splice( sortIdx, 1 );
+ }
+ else {
+ sorting[sortIdx][1] = asSorting[ nextSortIdx ];
+ sorting[sortIdx]._idx = nextSortIdx;
+ }
+ }
+ else {
+ // No sort on this column yet
+ sorting.push( [ colIdx, asSorting[0], 0 ] );
+ sorting[sorting.length-1]._idx = 0;
+ }
+ }
+ else if ( sorting.length && sorting[0][0] == colIdx ) {
+ // Single column - already sorting on this column, modify the sort
+ nextSortIdx = next( sorting[0] );
+
+ sorting.length = 1;
+ sorting[0][1] = asSorting[ nextSortIdx ];
+ sorting[0]._idx = nextSortIdx;
+ }
+ else {
+ // Single column - sort only on this column
+ sorting.length = 0;
+ sorting.push( [ colIdx, asSorting[0] ] );
+ sorting[0]._idx = 0;
+ }
+
+ // Run the sort by calling a full redraw
+ _fnReDraw( settings );
+
+ // callback used for async user interaction
+ if ( typeof callback == 'function' ) {
+ callback( settings );
+ }
+ }
+
+
+ /**
+ * Attach a sort handler (click) to a node
+ * @param {object} settings dataTables settings object
+ * @param {node} attachTo node to attach the handler to
+ * @param {int} colIdx column sorting index
+ * @param {function} [callback] callback function
+ * @memberof DataTable#oApi
+ */
+ function _fnSortAttachListener ( settings, attachTo, colIdx, callback )
+ {
+ var col = settings.aoColumns[ colIdx ];
+
+ _fnBindAction( attachTo, {}, function (e) {
+ /* If the column is not sortable - don't to anything */
+ if ( col.bSortable === false ) {
+ return;
+ }
+
+ // If processing is enabled use a timeout to allow the processing
+ // display to be shown - otherwise to it synchronously
+ if ( settings.oFeatures.bProcessing ) {
+ _fnProcessingDisplay( settings, true );
+
+ setTimeout( function() {
+ _fnSortListener( settings, colIdx, e.shiftKey, callback );
+
+ // In server-side processing, the draw callback will remove the
+ // processing display
+ if ( _fnDataSource( settings ) !== 'ssp' ) {
+ _fnProcessingDisplay( settings, false );
+ }
+ }, 0 );
+ }
+ else {
+ _fnSortListener( settings, colIdx, e.shiftKey, callback );
+ }
+ } );
+ }
+
+
+ /**
+ * Set the sorting classes on table's body, Note: it is safe to call this function
+ * when bSort and bSortClasses are false
+ * @param {object} oSettings dataTables settings object
+ * @memberof DataTable#oApi
+ */
+ function _fnSortingClasses( settings )
+ {
+ var oldSort = settings.aLastSort;
+ var sortClass = settings.oClasses.sSortColumn;
+ var sort = _fnSortFlatten( settings );
+ var features = settings.oFeatures;
+ var i, ien, colIdx;
+
+ if ( features.bSort && features.bSortClasses ) {
+ // Remove old sorting classes
+ for ( i=0, ien=oldSort.length ; i 0 && state.time < +new Date() - (duration*1000) ) {
+ return;
+ }
+
+ // Number of columns have changed - all bets are off, no restore of settings
+ if ( columns.length !== state.columns.length ) {
+ return;
+ }
+
+ // Store the saved state so it might be accessed at any time
+ settings.oLoadedState = $.extend( true, {}, state );
+
+ // Restore key features - todo - for 1.11 this needs to be done by
+ // subscribed events
+ if ( state.start !== undefined ) {
+ settings._iDisplayStart = state.start;
+ settings.iInitDisplayStart = state.start;
+ }
+ if ( state.length !== undefined ) {
+ settings._iDisplayLength = state.length;
+ }
+
+ // Order
+ if ( state.order !== undefined ) {
+ settings.aaSorting = [];
+ $.each( state.order, function ( i, col ) {
+ settings.aaSorting.push( col[0] >= columns.length ?
+ [ 0, col[1] ] :
+ col
+ );
+ } );
+ }
+
+ // Search
+ if ( state.search !== undefined ) {
+ $.extend( settings.oPreviousSearch, _fnSearchToHung( state.search ) );
+ }
+
+ // Columns
+ for ( i=0, ien=state.columns.length ; i= end )
+ {
+ start = end - len;
+ }
+
+ // Keep the start record on the current page
+ start -= (start % len);
+
+ if ( len === -1 || start < 0 )
+ {
+ start = 0;
+ }
+
+ settings._iDisplayStart = start;
+ }
+
+
+ function _fnRenderer( settings, type )
+ {
+ var renderer = settings.renderer;
+ var host = DataTable.ext.renderer[type];
+
+ if ( $.isPlainObject( renderer ) && renderer[type] ) {
+ // Specific renderer for this type. If available use it, otherwise use
+ // the default.
+ return host[renderer[type]] || host._;
+ }
+ else if ( typeof renderer === 'string' ) {
+ // Common renderer - if there is one available for this type use it,
+ // otherwise use the default
+ return host[renderer] || host._;
+ }
+
+ // Use the default
+ return host._;
+ }
+
+
+ /**
+ * Detect the data source being used for the table. Used to simplify the code
+ * a little (ajax) and to make it compress a little smaller.
+ *
+ * @param {object} settings dataTables settings object
+ * @returns {string} Data source
+ * @memberof DataTable#oApi
+ */
+ function _fnDataSource ( settings )
+ {
+ if ( settings.oFeatures.bServerSide ) {
+ return 'ssp';
+ }
+ else if ( settings.ajax || settings.sAjaxSource ) {
+ return 'ajax';
+ }
+ return 'dom';
+ }
+
+ DataTable = function( options )
+ {
/**
* Perform a jQuery selector action on the table's TR elements (from the tbody) and
* return the resulting jQuery object.
@@ -4948,10 +5391,11 @@
* Can be either 'current', whereby the current sorting of the table is used, or
* 'original' whereby the original order the data was read into the table is used.
* @param {string} [oOpts.page=all] Limit the selection to the currently displayed page
- * ("current") or not ("all"). If 'current' is given, then order is assumed to be
+ * ("current") or not ("all"). If 'current' is given, then order is assumed to be
* 'current' and filter is 'applied', regardless of what they might be given as.
* @returns {object} jQuery object, filtered by the given selector.
* @dtopt API
+ * @deprecated Since v1.10
*
* @example
* $(document).ready(function() {
@@ -4968,100 +5412,13 @@
* // Filter to rows with 'Webkit' in them, add a background colour and then
* // remove the filter, thus highlighting the 'Webkit' rows only.
* oTable.fnFilter('Webkit');
- * oTable.$('tr', {"filter": "applied"}).css('backgroundColor', 'blue');
+ * oTable.$('tr', {"search": "applied"}).css('backgroundColor', 'blue');
* oTable.fnFilter('');
* } );
*/
this.$ = function ( sSelector, oOpts )
{
- var i, iLen, a = [], tr;
- var oSettings = _fnSettingsFromNode( this[DataTable.ext.iApiIndex] );
- var aoData = oSettings.aoData;
- var aiDisplay = oSettings.aiDisplay;
- var aiDisplayMaster = oSettings.aiDisplayMaster;
-
- if ( !oOpts )
- {
- oOpts = {};
- }
-
- oOpts = $.extend( {}, {
- "filter": "none", // applied
- "order": "current", // "original"
- "page": "all" // current
- }, oOpts );
-
- // Current page implies that order=current and fitler=applied, since it is fairly
- // senseless otherwise
- if ( oOpts.page == 'current' )
- {
- for ( i=oSettings._iDisplayStart, iLen=oSettings.fnDisplayEnd() ; i
*
1D array of data - add a single row with the data provided
*
2D array of arrays - add multiple rows in a single call
*
object - data object when using mData
*
array of objects - multiple data objects when using mData
*
- * @param {bool} [bRedraw=true] redraw the table or not
- * @returns {array} An array of integers, representing the list of indexes in
- * aoData ({@link DataTable.models.oSettings}) that have been added to
+ * @param {bool} [redraw=true] redraw the table or not
+ * @returns {array} An array of integers, representing the list of indexes in
+ * aoData ({@link DataTable.models.oSettings}) that have been added to
* the table.
* @dtopt API
+ * @deprecated Since v1.10
*
* @example
* // Global var for counter
* var giCount = 2;
- *
+ *
* $(document).ready(function() {
* $('#example').dataTable();
* } );
- *
+ *
* function fnClickAddRow() {
* $('#example').dataTable().fnAddData( [
* giCount+".1",
@@ -5160,63 +5529,35 @@
* giCount+".3",
* giCount+".4" ]
* );
- *
+ *
* giCount++;
* }
*/
- this.fnAddData = function( mData, bRedraw )
+ this.fnAddData = function( data, redraw )
{
- if ( mData.length === 0 )
- {
- return [];
- }
-
- var aiReturn = [];
- var iTest;
-
- /* Find settings from table node */
- var oSettings = _fnSettingsFromNode( this[DataTable.ext.iApiIndex] );
-
+ var api = this.api( true );
+
/* Check if we want to add multiple rows or not */
- if ( typeof mData[0] === "object" && mData[0] !== null )
- {
- for ( var i=0 ; i= oSettings.fnRecordsDisplay() )
- {
- oSettings._iDisplayStart -= oSettings._iDisplayLength;
- if ( oSettings._iDisplayStart < 0 )
- {
- oSettings._iDisplayStart = 0;
- }
- }
-
- if ( bRedraw === undefined || bRedraw )
- {
- _fnCalculateEnd( oSettings );
- _fnDraw( oSettings );
- }
-
- return oData;
+
+ return data;
};
/**
- * Restore the table to it's original state in the DOM by removing all of DataTables
+ * Restore the table to it's original state in the DOM by removing all of DataTables
* enhancements, alterations to the DOM structure of the table and event listeners.
- * @param {boolean} [bRemove=false] Completely remove the table from the DOM
+ * @param {boolean} [remove=false] Completely remove the table from the DOM
* @dtopt API
+ * @deprecated Since v1.10
*
* @example
* $(document).ready(function() {
@@ -5404,159 +5694,31 @@
* oTable.fnDestroy();
* } );
*/
- this.fnDestroy = function ( bRemove )
+ this.fnDestroy = function ( remove )
{
- var oSettings = _fnSettingsFromNode( this[DataTable.ext.iApiIndex] );
- var nOrig = oSettings.nTableWrapper.parentNode;
- var nBody = oSettings.nTBody;
- var i, iLen;
-
- bRemove = (bRemove===undefined) ? false : bRemove;
-
- /* Flag to note that the table is currently being destroyed - no action should be taken */
- oSettings.bDestroying = true;
-
- /* Fire off the destroy callbacks for plug-ins etc */
- _fnCallbackFire( oSettings, "aoDestroyCallback", "destroy", [oSettings] );
-
- /* If the table is not being removed, restore the hidden columns */
- if ( !bRemove )
- {
- for ( i=0, iLen=oSettings.aoColumns.length ; itr>td.'+oSettings.oClasses.sRowEmpty, oSettings.nTable).parent().remove();
-
- /* When scrolling we had to break the table up - restore it */
- if ( oSettings.nTable != oSettings.nTHead.parentNode )
- {
- $(oSettings.nTable).children('thead').remove();
- oSettings.nTable.appendChild( oSettings.nTHead );
- }
-
- if ( oSettings.nTFoot && oSettings.nTable != oSettings.nTFoot.parentNode )
- {
- $(oSettings.nTable).children('tfoot').remove();
- oSettings.nTable.appendChild( oSettings.nTFoot );
- }
-
- /* Remove the DataTables generated nodes, events and classes */
- oSettings.nTable.parentNode.removeChild( oSettings.nTable );
- $(oSettings.nTableWrapper).remove();
-
- oSettings.aaSorting = [];
- oSettings.aaSortingFixed = [];
- _fnSortingClasses( oSettings );
-
- $(_fnGetTrNodes( oSettings )).removeClass( oSettings.asStripeClasses.join(' ') );
-
- $('th, td', oSettings.nTHead).removeClass( [
- oSettings.oClasses.sSortable,
- oSettings.oClasses.sSortableAsc,
- oSettings.oClasses.sSortableDesc,
- oSettings.oClasses.sSortableNone ].join(' ')
- );
- if ( oSettings.bJUI )
- {
- $('th span.'+oSettings.oClasses.sSortIcon
- + ', td span.'+oSettings.oClasses.sSortIcon, oSettings.nTHead).remove();
-
- $('th, td', oSettings.nTHead).each( function () {
- var jqWrapper = $('div.'+oSettings.oClasses.sSortJUIWrapper, this);
- var kids = jqWrapper.contents();
- $(this).append( kids );
- jqWrapper.remove();
- } );
- }
-
- /* Add the TR elements back into the table in their original order */
- if ( !bRemove && oSettings.nTableReinsertBefore )
- {
- nOrig.insertBefore( oSettings.nTable, oSettings.nTableReinsertBefore );
- }
- else if ( !bRemove )
- {
- nOrig.appendChild( oSettings.nTable );
- }
-
- for ( i=0, iLen=oSettings.aoData.length ; i= _fnVisbleColumns( oSettings ));
+ var api = this.api( true ).column( iCol ).visible( bShow );
- /* Which coloumn should we be inserting before? */
- if ( !bAppend )
- {
- for ( i=iCol ; i 1 ? // optimisation for single table case
+ _fnExtend( o, options, true ) :
+ options;
+
+ /*global oInit,_that,emptyInit*/
var i=0, iLen, j, jLen, k, kLen;
var sId = this.getAttribute( 'id' );
var bInitHandedOff = false;
- var bUsePassedData = false;
+ var defaults = DataTable.defaults;
+ var $this = $(this);
/* Sanity check */
if ( this.nodeName.toLowerCase() != 'table' )
{
- _fnLog( null, 0, "Attempted to initialise DataTables on a node which is not a "+
- "table: "+this.nodeName );
+ _fnLog( null, 0, 'Non-table node initialisation ('+this.nodeName+')', 2 );
return;
}
+ /* Backwards compatibility for the defaults */
+ _fnCompatOpts( defaults );
+ _fnCompatCols( defaults.column );
+
+ /* Convert the camel-case defaults to Hungarian */
+ _fnCamelToHungarian( defaults, defaults, true );
+ _fnCamelToHungarian( defaults.column, defaults.column, true );
+
+ /* Setting up the initialisation object */
+ _fnCamelToHungarian( defaults, $.extend( oInit, $this.data() ) );
+
+
+
/* Check to see if we are re-initialising a table */
- for ( i=0, iLen=DataTable.settings.length ; i= oSettings.aoColumns.length )
+ var sorting = oSettings.aaSorting;
+ for ( i=0, iLen=sorting.length ; i').appendTo(this);
}
oSettings.nTHead = thead[0];
- var tbody = $(this).children('tbody');
+ var tbody = $this.children('tbody');
if ( tbody.length === 0 )
{
- tbody = [ document.createElement( 'tbody' ) ];
- this.appendChild( tbody[0] );
+ tbody = $('').appendTo(this);
}
oSettings.nTBody = tbody[0];
- oSettings.nTBody.setAttribute( "role", "alert" );
- oSettings.nTBody.setAttribute( "aria-live", "polite" );
- oSettings.nTBody.setAttribute( "aria-relevant", "all" );
- var tfoot = $(this).children('tfoot');
+ var tfoot = $this.children('tfoot');
if ( tfoot.length === 0 && captions.length > 0 && (oSettings.oScroll.sX !== "" || oSettings.oScroll.sY !== "") )
{
// If we are a scrolling table, and no footer has been given, then we need to create
// a tfoot element for the caption element to be appended to
- tfoot = [ document.createElement( 'tfoot' ) ];
- this.appendChild( tfoot[0] );
+ tfoot = $('').appendTo(this);
}
- if ( tfoot.length > 0 )
- {
+ if ( tfoot.length === 0 || tfoot.children().length === 0 ) {
+ $this.addClass( oClasses.sNoFooter );
+ }
+ else if ( tfoot.length > 0 ) {
oSettings.nTFoot = tfoot[0];
_fnDetectHeader( oSettings.aoFooter, oSettings.nTFoot );
}
/* Check if there is data passing into the constructor */
- if ( bUsePassedData )
+ if ( oInit.aaData )
{
for ( i=0 ; i= parseInt(sThat, 10);
};
/**
- * Check if a TABLE node is a DataTable table already or not.
- * @param {node} nTable The TABLE node to check if it is a DataTable or not (note that other
- * node types can be passed in, but will always return false).
+ * DataTables API class - used to control and interface with one or more
+ * DataTables enhanced tables.
+ *
+ * The API class is heavily based on jQuery, presenting a chainable interface
+ * that you can use to interact with tables. Each instance of the API class has
+ * a "context" - i.e. the tables that it will operate on. This could be a single
+ * table, all tables on a page or a sub-set thereof.
+ *
+ * Additionally the API is designed to allow you to easily work with the data in
+ * the tables, retrieving and manipulating it as required. This is done by
+ * presenting the API class as an array like interface. The contents of the
+ * array depend upon the actions requested by each method (for example
+ * `rows().nodes()` will return an array of nodes, while `rows().data()` will
+ * return an array of objects or arrays depending upon your table's
+ * configuration). The API object has a number of array like methods (`push`,
+ * `pop`, `reverse` etc) as well as additional helper methods (`each`, `pluck`,
+ * `unique` etc) to assist your working with the data held in a table.
+ *
+ * Most methods (those which return an Api instance) are chainable, which means
+ * the return from a method call also has all of the methods available that the
+ * top level object had. For example, these two calls are equivalent:
+ *
+ * // Not chained
+ * api.row.add( {...} );
+ * api.draw();
+ *
+ * // Chained
+ * api.row.add( {...} ).draw();
+ *
+ * @class DataTable.Api
+ * @param {array|object|string|jQuery} context DataTable identifier. This is
+ * used to define which DataTables enhanced tables this API will operate on.
+ * Can be one of:
+ *
+ * * `string` - jQuery selector. Any DataTables' matching the given selector
+ * with be found and used.
+ * * `node` - `TABLE` node which has already been formed into a DataTable.
+ * * `jQuery` - A jQuery object of `TABLE` nodes.
+ * * `object` - DataTables settings object
+ * @param {array} [data] Data to initialise the Api instance with.
+ *
+ * @example
+ * // Direct initialisation during DataTables construction
+ * var api = $('#example').DataTable();
+ *
+ * @example
+ * // Initialisation using a DataTables jQuery object
+ * var api = $('#example').dataTable().api();
+ *
+ * @example
+ * // Initialisation as a constructor
+ * var api = new $.fn.DataTable.Api( 'table.dataTable' );
+ */
+ _Api = function ( context, data )
+ {
+ if ( ! (this instanceof _Api) ) {
+ return new _Api( context, data );
+ }
+
+ var settings = [];
+ var ctxSettings = function ( o ) {
+ var a = _toSettings( o );
+ if ( a ) {
+ settings = settings.concat( a );
+ }
+ };
+
+ if ( $.isArray( context ) ) {
+ for ( var i=0, ien=context.length ; i idx ?
+ new _Api( ctx[idx], this[idx] ) :
+ null;
+ },
+
+
+ filter: function ( fn )
+ {
+ var a = [];
+
+ if ( __arrayProto.filter ) {
+ a = __arrayProto.filter.call( this, fn, this );
+ }
+ else {
+ // Compatibility for browsers without EMCA-252-5 (JS 1.6)
+ for ( var i=0, ien=this.length ; i 0 ) {
+ return ctx[0].json;
+ }
+
+ // else return undefined;
+ } );
+
+
+ /**
+ * Get the data submitted in the last Ajax request
+ */
+ _api_register( 'ajax.params()', function () {
+ var ctx = this.context;
+
+ if ( ctx.length > 0 ) {
+ return ctx[0].oAjaxData;
+ }
+
+ // else return undefined;
+ } );
+
+
+ /**
+ * Reload tables from the Ajax data source. Note that this function will
+ * automatically re-draw the table when the remote data has been loaded.
+ *
+ * @param {boolean} [reset=true] Reset (default) or hold the current paging
+ * position. A full re-sort and re-filter is performed when this method is
+ * called, which is why the pagination reset is the default action.
+ * @returns {DataTables.Api} this
+ */
+ _api_register( 'ajax.reload()', function ( callback, resetPaging ) {
+ return this.iterator( 'table', function (settings) {
+ __reload( settings, resetPaging===false, callback );
+ } );
+ } );
+
+
+ /**
+ * Get the current Ajax URL. Note that this returns the URL from the first
+ * table in the current context.
+ *
+ * @return {string} Current Ajax source URL
+ *//**
+ * Set the Ajax URL. Note that this will set the URL for all tables in the
+ * current context.
+ *
+ * @param {string} url URL to set.
+ * @returns {DataTables.Api} this
+ */
+ _api_register( 'ajax.url()', function ( url ) {
+ var ctx = this.context;
+
+ if ( url === undefined ) {
+ // get
+ if ( ctx.length === 0 ) {
+ return undefined;
+ }
+ ctx = ctx[0];
+
+ return ctx.ajax ?
+ $.isPlainObject( ctx.ajax ) ?
+ ctx.ajax.url :
+ ctx.ajax :
+ ctx.sAjaxSource;
+ }
+
+ // set
+ return this.iterator( 'table', function ( settings ) {
+ if ( $.isPlainObject( settings.ajax ) ) {
+ settings.ajax.url = url;
+ }
+ else {
+ settings.ajax = url;
+ }
+ // No need to consider sAjaxSource here since DataTables gives priority
+ // to `ajax` over `sAjaxSource`. So setting `ajax` here, renders any
+ // value of `sAjaxSource` redundant.
+ } );
+ } );
+
+
+ /**
+ * Load data from the newly set Ajax URL. Note that this method is only
+ * available when `ajax.url()` is used to set a URL. Additionally, this method
+ * has the same effect as calling `ajax.reload()` but is provided for
+ * convenience when setting a new URL. Like `ajax.reload()` it will
+ * automatically redraw the table once the remote data has been loaded.
+ *
+ * @returns {DataTables.Api} this
+ */
+ _api_register( 'ajax.url().load()', function ( callback, resetPaging ) {
+ // Same as a reload, but makes sense to present it for easy access after a
+ // url change
+ return this.iterator( 'table', function ( ctx ) {
+ __reload( ctx, resetPaging===false, callback );
+ } );
+ } );
+
+
+
+
+ var _selector_run = function ( type, selector, selectFn, settings, opts )
+ {
+ var
+ out = [], res,
+ a, i, ien, j, jen,
+ selectorType = typeof selector;
+
+ // Can't just check for isArray here, as an API or jQuery instance might be
+ // given with their array like look
+ if ( ! selector || selectorType === 'string' || selectorType === 'function' || selector.length === undefined ) {
+ selector = [ selector ];
+ }
+
+ for ( i=0, ien=selector.length ; i 0 ) {
+ // Assign the first element to the first item in the instance
+ // and truncate the instance and context
+ inst[0] = inst[i];
+ inst[0].length = 1;
+ inst.length = 1;
+ inst.context = [ inst.context[i] ];
+
+ return inst;
+ }
+ }
+
+ // Not found - return an empty instance
+ inst.length = 0;
+ return inst;
+ };
+
+
+ var _selector_row_indexes = function ( settings, opts )
+ {
+ var
+ i, ien, tmp, a=[],
+ displayFiltered = settings.aiDisplay,
+ displayMaster = settings.aiDisplayMaster;
+
+ var
+ search = opts.search, // none, applied, removed
+ order = opts.order, // applied, current, index (original - compatibility with 1.9)
+ page = opts.page; // all, current
+
+ if ( _fnDataSource( settings ) == 'ssp' ) {
+ // In server-side processing mode, most options are irrelevant since
+ // rows not shown don't exist and the index order is the applied order
+ // Removed is a special case - for consistency just return an empty
+ // array
+ return search === 'removed' ?
+ [] :
+ _range( 0, displayMaster.length );
+ }
+ else if ( page == 'current' ) {
+ // Current page implies that order=current and fitler=applied, since it is
+ // fairly senseless otherwise, regardless of what order and search actually
+ // are
+ for ( i=settings._iDisplayStart, ien=settings.fnDisplayEnd() ; i= 0 && search == 'applied') )
+ {
+ a.push( i );
+ }
+ }
+ }
+ }
+
+ return a;
+ };
+
+
+ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Rows
+ *
+ * {} - no selector - use all available rows
+ * {integer} - row aoData index
+ * {node} - TR node
+ * {string} - jQuery selector to apply to the TR elements
+ * {array} - jQuery array of nodes, or simply an array of TR nodes
+ *
+ */
+
+
+ var __row_selector = function ( settings, selector, opts )
+ {
+ var run = function ( sel ) {
+ var selInt = _intVal( sel );
+ var i, ien;
+
+ // Short cut - selector is a number and no options provided (default is
+ // all records, so no need to check if the index is in there, since it
+ // must be - dev error if the index doesn't exist).
+ if ( selInt !== null && ! opts ) {
+ return [ selInt ];
+ }
+
+ var rows = _selector_row_indexes( settings, opts );
+
+ if ( selInt !== null && $.inArray( selInt, rows ) !== -1 ) {
+ // Selector - integer
+ return [ selInt ];
+ }
+ else if ( ! sel ) {
+ // Selector - none
+ return rows;
+ }
+
+ // Selector - function
+ if ( typeof sel === 'function' ) {
+ return $.map( rows, function (idx) {
+ var row = settings.aoData[ idx ];
+ return sel( idx, row._aData, row.nTr ) ? idx : null;
+ } );
+ }
+
+ // Get nodes in the order from the `rows` array with null values removed
+ var nodes = _removeEmpty(
+ _pluck_order( settings.aoData, rows, 'nTr' )
+ );
+
+ // Selector - node
+ if ( sel.nodeName ) {
+ if ( sel._DT_RowIndex !== undefined ) {
+ return [ sel._DT_RowIndex ]; // Property added by DT for fast lookup
+ }
+ else if ( sel._DT_CellIndex ) {
+ return [ sel._DT_CellIndex.row ];
+ }
+ else {
+ var host = $(sel).closest('*[data-dt-row]');
+ return host.length ?
+ [ host.data('dt-row') ] :
+ [];
+ }
+ }
+
+ // ID selector. Want to always be able to select rows by id, regardless
+ // of if the tr element has been created or not, so can't rely upon
+ // jQuery here - hence a custom implementation. This does not match
+ // Sizzle's fast selector or HTML4 - in HTML5 the ID can be anything,
+ // but to select it using a CSS selector engine (like Sizzle or
+ // querySelect) it would need to need to be escaped for some characters.
+ // DataTables simplifies this for row selectors since you can select
+ // only a row. A # indicates an id any anything that follows is the id -
+ // unescaped.
+ if ( typeof sel === 'string' && sel.charAt(0) === '#' ) {
+ // get row index from id
+ var rowObj = settings.aIds[ sel.replace( /^#/, '' ) ];
+ if ( rowObj !== undefined ) {
+ return [ rowObj.idx ];
+ }
+
+ // need to fall through to jQuery in case there is DOM id that
+ // matches
+ }
+
+ // Selector - jQuery selector string, array of nodes or jQuery object/
+ // As jQuery's .filter() allows jQuery objects to be passed in filter,
+ // it also allows arrays, so this will cope with all three options
+ return $(nodes)
+ .filter( sel )
+ .map( function () {
+ return this._DT_RowIndex;
+ } )
+ .toArray();
+ };
+
+ return _selector_run( 'row', selector, run, settings, opts );
+ };
+
+
+ _api_register( 'rows()', function ( selector, opts ) {
+ // argument shifting
+ if ( selector === undefined ) {
+ selector = '';
+ }
+ else if ( $.isPlainObject( selector ) ) {
+ opts = selector;
+ selector = '';
+ }
+
+ opts = _selector_opts( opts );
+
+ var inst = this.iterator( 'table', function ( settings ) {
+ return __row_selector( settings, selector, opts );
+ }, 1 );
+
+ // Want argument shifting here and in __row_selector?
+ inst.selector.rows = selector;
+ inst.selector.opts = opts;
+
+ return inst;
+ } );
+
+ _api_register( 'rows().nodes()', function () {
+ return this.iterator( 'row', function ( settings, row ) {
+ return settings.aoData[ row ].nTr || undefined;
+ }, 1 );
+ } );
+
+ _api_register( 'rows().data()', function () {
+ return this.iterator( true, 'rows', function ( settings, rows ) {
+ return _pluck_order( settings.aoData, rows, '_aData' );
+ }, 1 );
+ } );
+
+ _api_registerPlural( 'rows().cache()', 'row().cache()', function ( type ) {
+ return this.iterator( 'row', function ( settings, row ) {
+ var r = settings.aoData[ row ];
+ return type === 'search' ? r._aFilterData : r._aSortData;
+ }, 1 );
+ } );
+
+ _api_registerPlural( 'rows().invalidate()', 'row().invalidate()', function ( src ) {
+ return this.iterator( 'row', function ( settings, row ) {
+ _fnInvalidate( settings, row, src );
+ } );
+ } );
+
+ _api_registerPlural( 'rows().indexes()', 'row().index()', function () {
+ return this.iterator( 'row', function ( settings, row ) {
+ return row;
+ }, 1 );
+ } );
+
+ _api_registerPlural( 'rows().ids()', 'row().id()', function ( hash ) {
+ var a = [];
+ var context = this.context;
+
+ // `iterator` will drop undefined values, but in this case we want them
+ for ( var i=0, ien=context.length ; i
').addClass( k );
+ $('td', created)
+ .addClass( k )
+ .html( r )
+ [0].colSpan = _fnVisbleColumns( ctx );
+
+ rows.push( created[0] );
+ }
+ };
+
+ addRow( data, klass );
+
+ if ( row._details ) {
+ row._details.remove();
+ }
+
+ row._details = $(rows);
+
+ // If the children were already shown, that state should be retained
+ if ( row._detailsShow ) {
+ row._details.insertAfter( row.nTr );
+ }
+ };
+
+
+ var __details_remove = function ( api, idx )
+ {
+ var ctx = api.context;
+
+ if ( ctx.length ) {
+ var row = ctx[0].aoData[ idx !== undefined ? idx : api[0] ];
+
+ if ( row && row._details ) {
+ row._details.remove();
+
+ row._detailsShow = undefined;
+ row._details = undefined;
+ }
+ }
+ };
+
+
+ var __details_display = function ( api, show ) {
+ var ctx = api.context;
+
+ if ( ctx.length && api.length ) {
+ var row = ctx[0].aoData[ api[0] ];
+
+ if ( row._details ) {
+ row._detailsShow = show;
+
+ if ( show ) {
+ row._details.insertAfter( row.nTr );
+ }
+ else {
+ row._details.detach();
+ }
+
+ __details_events( ctx[0] );
+ }
+ }
+ };
+
+
+ var __details_events = function ( settings )
+ {
+ var api = new _Api( settings );
+ var namespace = '.dt.DT_details';
+ var drawEvent = 'draw'+namespace;
+ var colvisEvent = 'column-visibility'+namespace;
+ var destroyEvent = 'destroy'+namespace;
+ var data = settings.aoData;
+
+ api.off( drawEvent +' '+ colvisEvent +' '+ destroyEvent );
+
+ if ( _pluck( data, '_details' ).length > 0 ) {
+ // On each draw, insert the required elements into the document
+ api.on( drawEvent, function ( e, ctx ) {
+ if ( settings !== ctx ) {
+ return;
+ }
+
+ api.rows( {page:'current'} ).eq(0).each( function (idx) {
+ // Internal data grab
+ var row = data[ idx ];
+
+ if ( row._detailsShow ) {
+ row._details.insertAfter( row.nTr );
+ }
+ } );
+ } );
+
+ // Column visibility change - update the colspan
+ api.on( colvisEvent, function ( e, ctx, idx, vis ) {
+ if ( settings !== ctx ) {
+ return;
+ }
+
+ // Update the colspan for the details rows (note, only if it already has
+ // a colspan)
+ var row, visible = _fnVisbleColumns( ctx );
+
+ for ( var i=0, ien=data.length ; i=0 count from left, <0 count from right)
+ * "{integer}:visIdx" - visible column index (i.e. translate to column index) (>=0 count from left, <0 count from right)
+ * "{integer}:visible" - alias for {integer}:visIdx (>=0 count from left, <0 count from right)
+ * "{string}:name" - column name
+ * "{string}" - jQuery selector on column header nodes
+ *
+ */
+
+ // can be an array of these items, comma separated list, or an array of comma
+ // separated lists
+
+ var __re_column_selector = /^(.+):(name|visIdx|visible)$/;
+
+
+ // r1 and r2 are redundant - but it means that the parameters match for the
+ // iterator callback in columns().data()
+ var __columnData = function ( settings, column, r1, r2, rows ) {
+ var a = [];
+ for ( var row=0, ien=rows.length ; row= 0 ?
+ selInt : // Count from left
+ columns.length + selInt // Count from right (+ because its a negative value)
+ ];
+ }
+
+ // Selector = function
+ if ( typeof s === 'function' ) {
+ var rows = _selector_row_indexes( settings, opts );
+
+ return $.map( columns, function (col, idx) {
+ return s(
+ idx,
+ __columnData( settings, idx, 0, 0, rows ),
+ nodes[ idx ]
+ ) ? idx : null;
+ } );
+ }
+
+ // jQuery or string selector
+ var match = typeof s === 'string' ?
+ s.match( __re_column_selector ) :
+ '';
+
+ if ( match ) {
+ switch( match[2] ) {
+ case 'visIdx':
+ case 'visible':
+ var idx = parseInt( match[1], 10 );
+ // Visible index given, convert to column index
+ if ( idx < 0 ) {
+ // Counting from the right
+ var visColumns = $.map( columns, function (col,i) {
+ return col.bVisible ? i : null;
+ } );
+ return [ visColumns[ visColumns.length + idx ] ];
+ }
+ // Counting from the left
+ return [ _fnVisibleToColumnIndex( settings, idx ) ];
+
+ case 'name':
+ // match by name. `names` is column index complete and in order
+ return $.map( names, function (name, i) {
+ return name === match[1] ? i : null;
+ } );
+
+ default:
+ return [];
+ }
+ }
+
+ // Cell in the table body
+ if ( s.nodeName && s._DT_CellIndex ) {
+ return [ s._DT_CellIndex.column ];
+ }
+
+ // jQuery selector on the TH elements for the columns
+ var jqResult = $( nodes )
+ .filter( s )
+ .map( function () {
+ return $.inArray( this, nodes ); // `nodes` is column index complete and in order
+ } )
+ .toArray();
+
+ if ( jqResult.length || ! s.nodeName ) {
+ return jqResult;
+ }
+
+ // Otherwise a node which might have a `dt-column` data attribute, or be
+ // a child or such an element
+ var host = $(s).closest('*[data-dt-column]');
+ return host.length ?
+ [ host.data('dt-column') ] :
+ [];
+ };
+
+ return _selector_run( 'column', selector, run, settings, opts );
+ };
+
+
+ var __setColumnVis = function ( settings, column, vis, recalc ) {
+ var
+ cols = settings.aoColumns,
+ col = cols[ column ],
+ data = settings.aoData,
+ row, cells, i, ien, tr;
+
+ // Get
+ if ( vis === undefined ) {
+ return col.bVisible;
+ }
+
+ // Set
+ // No change
+ if ( col.bVisible === vis ) {
+ return;
+ }
+
+ if ( vis ) {
+ // Insert column
+ // Need to decide if we should use appendChild or insertBefore
+ var insertBefore = $.inArray( true, _pluck(cols, 'bVisible'), column+1 );
+
+ for ( i=0, ien=data.length ; i iThat;
+ }
+
+ return true;
+ };
+
+
+ /**
+ * Check if a `
` node is a DataTable table already or not.
+ *
+ * @param {node|jquery|string} table Table node, jQuery object or jQuery
+ * selector for the table to test. Note that if more than more than one
+ * table is passed on, only the first will be checked
* @returns {boolean} true the table given is a DataTable, or false otherwise
* @static
* @dtopt API-Static
*
* @example
- * var ex = document.getElementById('example');
- * if ( ! $.fn.DataTable.fnIsDataTable( ex ) ) {
- * $(ex).dataTable();
+ * if ( ! $.fn.DataTable.isDataTable( '#example' ) ) {
+ * $('#example').dataTable();
* }
*/
- DataTable.fnIsDataTable = function ( nTable )
+ DataTable.isDataTable = DataTable.fnIsDataTable = function ( table )
{
- var o = DataTable.settings;
+ var t = $(table).get(0);
+ var is = false;
- for ( var i=0 ; i 0 ) {
- * $(table).dataTable().fnAdjustColumnSizing();
- * }
+ * $.each( $.fn.dataTable.tables(true), function () {
+ * $(table).DataTable().columns.adjust();
+ * } );
*/
- DataTable.fnTables = function ( bVisible )
+ DataTable.tables = DataTable.fnTables = function ( visible )
{
- var out = [];
+ var api = false;
- jQuery.each( DataTable.settings, function (i, o) {
- if ( !bVisible || (bVisible === true && $(o.nTable).is(':visible')) )
- {
- out.push( o.nTable );
+ if ( $.isPlainObject( visible ) ) {
+ api = visible.api;
+ visible = visible.visible;
+ }
+
+ var a = $.map( DataTable.settings, function (o) {
+ if ( !visible || (visible && $(o.nTable).is(':visible')) ) {
+ return o.nTable;
}
} );
- return out;
+ return api ?
+ new _Api( a ) :
+ a;
};
+
+ /**
+ * DataTables utility methods
+ *
+ * This namespace provides helper methods that DataTables uses internally to
+ * create a DataTable, but which are not exclusively used only for DataTables.
+ * These methods can be used by extension authors to save the duplication of
+ * code.
+ *
+ * @namespace
+ */
+ DataTable.util = {
+ /**
+ * Throttle the calls to a function. Arguments and context are maintained
+ * for the throttled function.
+ *
+ * @param {function} fn Function to be called
+ * @param {integer} freq Call frequency in mS
+ * @return {function} Wrapped function
+ */
+ throttle: _fnThrottle,
+
+
+ /**
+ * Escape a string such that it can be used in a regular expression
+ *
+ * @param {string} sVal string to escape
+ * @returns {string} escaped string
+ */
+ escapeRegex: _fnEscapeRegex
+ };
+
+
+ /**
+ * Convert from camel case parameters to Hungarian notation. This is made public
+ * for the extensions to provide the same ability as DataTables core to accept
+ * either the 1.9 style Hungarian notation, or the 1.10+ style camelCase
+ * parameters.
+ *
+ * @param {object} src The model object which holds all parameters that can be
+ * mapped.
+ * @param {object} user The object to convert from camel case to Hungarian.
+ * @param {boolean} force When set to `true`, properties which already have a
+ * Hungarian value in the `user` object will be overwritten. Otherwise they
+ * won't be.
+ */
+ DataTable.camelToHungarian = _fnCamelToHungarian;
+
+
+
+ /**
+ *
+ */
+ _api_register( '$()', function ( selector, opts ) {
+ var
+ rows = this.rows( opts ).nodes(), // Get all rows
+ jqRows = $(rows);
+
+ return $( [].concat(
+ jqRows.filter( selector ).toArray(),
+ jqRows.find( selector ).toArray()
+ ) );
+ } );
+
+
+ // jQuery functions to operate on the tables
+ $.each( [ 'on', 'one', 'off' ], function (i, key) {
+ _api_register( key+'()', function ( /* event, handler */ ) {
+ var args = Array.prototype.slice.call(arguments);
+
+ // Add the `dt` namespace automatically if it isn't already present
+ if ( ! args[0].match(/\.dt\b/) ) {
+ args[0] += '.dt';
+ }
+
+ var inst = $( this.tables().nodes() );
+ inst[key].apply( inst, args );
+ return this;
+ } );
+ } );
+
+
+ _api_register( 'clear()', function () {
+ return this.iterator( 'table', function ( settings ) {
+ _fnClearTable( settings );
+ } );
+ } );
+
+
+ _api_register( 'settings()', function () {
+ return new _Api( this.context, this.context );
+ } );
+
+
+ _api_register( 'init()', function () {
+ var ctx = this.context;
+ return ctx.length ? ctx[0].oInit : null;
+ } );
+
+
+ _api_register( 'data()', function () {
+ return this.iterator( 'table', function ( settings ) {
+ return _pluck( settings.aoData, '_aData' );
+ } ).flatten();
+ } );
+
+
+ _api_register( 'destroy()', function ( remove ) {
+ remove = remove || false;
+
+ return this.iterator( 'table', function ( settings ) {
+ var orig = settings.nTableWrapper.parentNode;
+ var classes = settings.oClasses;
+ var table = settings.nTable;
+ var tbody = settings.nTBody;
+ var thead = settings.nTHead;
+ var tfoot = settings.nTFoot;
+ var jqTable = $(table);
+ var jqTbody = $(tbody);
+ var jqWrapper = $(settings.nTableWrapper);
+ var rows = $.map( settings.aoData, function (r) { return r.nTr; } );
+ var i, ien;
+
+ // Flag to note that the table is currently being destroyed - no action
+ // should be taken
+ settings.bDestroying = true;
+
+ // Fire off the destroy callbacks for plug-ins etc
+ _fnCallbackFire( settings, "aoDestroyCallback", "destroy", [settings] );
+
+ // If not being removed from the document, make all columns visible
+ if ( ! remove ) {
+ new _Api( settings ).columns().visible( true );
+ }
+
+ // Blitz all `DT` namespaced events (these are internal events, the
+ // lowercase, `dt` events are user subscribed and they are responsible
+ // for removing them
+ jqWrapper.unbind('.DT').find(':not(tbody *)').unbind('.DT');
+ $(window).unbind('.DT-'+settings.sInstance);
+
+ // When scrolling we had to break the table up - restore it
+ if ( table != thead.parentNode ) {
+ jqTable.children('thead').detach();
+ jqTable.append( thead );
+ }
+
+ if ( tfoot && table != tfoot.parentNode ) {
+ jqTable.children('tfoot').detach();
+ jqTable.append( tfoot );
+ }
+
+ settings.aaSorting = [];
+ settings.aaSortingFixed = [];
+ _fnSortingClasses( settings );
+
+ $( rows ).removeClass( settings.asStripeClasses.join(' ') );
+
+ $('th, td', thead).removeClass( classes.sSortable+' '+
+ classes.sSortableAsc+' '+classes.sSortableDesc+' '+classes.sSortableNone
+ );
+
+ if ( settings.bJUI ) {
+ $('th span.'+classes.sSortIcon+ ', td span.'+classes.sSortIcon, thead).detach();
+ $('th, td', thead).each( function () {
+ var wrapper = $('div.'+classes.sSortJUIWrapper, this);
+ $(this).append( wrapper.contents() );
+ wrapper.detach();
+ } );
+ }
+
+ // Add the TR elements back into the table in their original order
+ jqTbody.children().detach();
+ jqTbody.append( rows );
+
+ // Remove the DataTables generated nodes, events and classes
+ var removedMethod = remove ? 'remove' : 'detach';
+ jqTable[ removedMethod ]();
+ jqWrapper[ removedMethod ]();
+
+ // If we need to reattach the table to the document
+ if ( ! remove && orig ) {
+ // insertBefore acts like appendChild if !arg[1]
+ orig.insertBefore( table, settings.nTableReinsertBefore );
+
+ // Restore the width of the original table - was read from the style property,
+ // so we can restore directly to that
+ jqTable
+ .css( 'width', settings.sDestroyWidth )
+ .removeClass( classes.sTable );
+
+ // If the were originally stripe classes - then we add them back here.
+ // Note this is not fool proof (for example if not all rows had stripe
+ // classes - but it's a good effort without getting carried away
+ ien = settings.asDestroyStripes.length;
+
+ if ( ien ) {
+ jqTbody.children().each( function (i) {
+ $(this).addClass( settings.asDestroyStripes[i % ien] );
+ } );
+ }
+ }
+
+ /* Remove the settings object from the settings array */
+ var idx = $.inArray( settings, DataTable.settings );
+ if ( idx !== -1 ) {
+ DataTable.settings.splice( idx, 1 );
+ }
+ } );
+ } );
+
+
+ // Add the `every()` method for rows, columns and cells in a compact form
+ $.each( [ 'column', 'row', 'cell' ], function ( i, type ) {
+ _api_register( type+'s().every()', function ( fn ) {
+ var opts = this.selector.opts;
+ var api = this;
+
+ return this.iterator( type, function ( settings, arg1, arg2, arg3, arg4 ) {
+ // Rows and columns:
+ // arg1 - index
+ // arg2 - table counter
+ // arg3 - loop counter
+ // arg4 - undefined
+ // Cells:
+ // arg1 - row index
+ // arg2 - column index
+ // arg3 - table counter
+ // arg4 - loop counter
+ fn.call(
+ api[ type ](
+ arg1,
+ type==='cell' ? arg2 : opts,
+ type==='cell' ? opts : undefined
+ ),
+ arg1, arg2, arg3, arg4
+ );
+ } );
+ } );
+ } );
+
+
+ // i18n method for extensions to be able to use the language object from the
+ // DataTable
+ _api_register( 'i18n()', function ( token, def, plural ) {
+ var ctx = this.context[0];
+ var resolved = _fnGetObjectDataFn( token )( ctx.oLanguage );
+
+ if ( resolved === undefined ) {
+ resolved = def;
+ }
+
+ if ( plural !== undefined && $.isPlainObject( resolved ) ) {
+ resolved = resolved[ plural ] !== undefined ?
+ resolved[ plural ] :
+ resolved._;
+ }
+
+ return resolved.replace( '%d', plural ); // nb: plural might be undefined,
+ } );
/**
* Version string for plug-ins to check compatibility. Allowed format is
- * a.b.c.d.e where: a:int, b:int, c:int, d:string(dev|beta), e:int. d and
- * e are optional
+ * `a.b.c-d` where: a:int, b:int, c:int, d:string(dev|beta|alpha). `d` is used
+ * only for non-release builds. See http://semver.org/ for more information.
* @member
* @type string
* @default Version number
*/
- DataTable.version = "1.9.4";
+ DataTable.version = "1.10.11";
/**
- * Private data store, containing all of the settings objects that are created for the
- * tables on a given page.
- *
- * Note that the DataTable.settings object is aliased to jQuery.fn.dataTableExt
- * through which it may be accessed and manipulated, or jQuery.fn.dataTable.settings.
+ * Private data store, containing all of the settings objects that are
+ * created for the tables on a given page.
+ *
+ * Note that the `DataTable.settings` object is aliased to
+ * `jQuery.fn.dataTableExt` through which it may be accessed and
+ * manipulated, or `jQuery.fn.dataTable.settings`.
* @member
* @type array
* @default []
@@ -6920,542 +9375,14 @@
DataTable.settings = [];
/**
- * Object models container, for the various models that DataTables has available
- * to it. These models define the objects that are used to hold the active state
- * and configuration of the table.
+ * Object models container, for the various models that DataTables has
+ * available to it. These models define the objects that are used to hold
+ * the active state and configuration of the table.
* @namespace
*/
DataTable.models = {};
- /**
- * DataTables extension options and plug-ins. This namespace acts as a collection "area"
- * for plug-ins that can be used to extend the default DataTables behaviour - indeed many
- * of the build in methods use this method to provide their own capabilities (sorting methods
- * for example).
- *
- * Note that this namespace is aliased to jQuery.fn.dataTableExt so it can be readily accessed
- * and modified by plug-ins.
- * @namespace
- */
- DataTable.models.ext = {
- /**
- * Plug-in filtering functions - this method of filtering is complimentary to the default
- * type based filtering, and a lot more comprehensive as it allows you complete control
- * over the filtering logic. Each element in this array is a function (parameters
- * described below) that is called for every row in the table, and your logic decides if
- * it should be included in the filtered data set or not.
- *
- *
- * Function input parameters:
- *
- *
{object} DataTables settings object: see {@link DataTable.models.oSettings}.
- *
{array|object} Data for the row to be processed (same as the original format
- * that was passed in as the data source, or an array from a DOM data source
- *
{int} Row index in aoData ({@link DataTable.models.oSettings.aoData}), which can
- * be useful to retrieve the TR element if you need DOM interaction.
- *
- *
- *
- * Function return:
- *
- *
{boolean} Include the row in the filtered result set (true) or not (false)
- *
- *
- *
- * @type array
- * @default []
- *
- * @example
- * // The following example shows custom filtering being applied to the fourth column (i.e.
- * // the aData[3] index) based on two input values from the end-user, matching the data in
- * // a certain range.
- * $.fn.dataTableExt.afnFiltering.push(
- * function( oSettings, aData, iDataIndex ) {
- * var iMin = document.getElementById('min').value * 1;
- * var iMax = document.getElementById('max').value * 1;
- * var iVersion = aData[3] == "-" ? 0 : aData[3]*1;
- * if ( iMin == "" && iMax == "" ) {
- * return true;
- * }
- * else if ( iMin == "" && iVersion < iMax ) {
- * return true;
- * }
- * else if ( iMin < iVersion && "" == iMax ) {
- * return true;
- * }
- * else if ( iMin < iVersion && iVersion < iMax ) {
- * return true;
- * }
- * return false;
- * }
- * );
- */
- "afnFiltering": [],
-
-
- /**
- * Plug-in sorting functions - this method of sorting is complimentary to the default type
- * based sorting that DataTables does automatically, allowing much greater control over the
- * the data that is being used to sort a column. This is useful if you want to do sorting
- * based on live data (for example the contents of an 'input' element) rather than just the
- * static string that DataTables knows of. The way these plug-ins work is that you create
- * an array of the values you wish to be sorted for the column in question and then return
- * that array. Which pre-sorting function is run here depends on the sSortDataType parameter
- * that is used for the column (if any). This is the corollary of ofnSearch for sort
- * data.
- *
- *
- * Function input parameters:
- *
- *
{object} DataTables settings object: see {@link DataTable.models.oSettings}.
- *
{int} Target column index
- *
- *
- *
- * Function return:
- *
- *
{array} Data for the column to be sorted upon
- *
- *
- *
- *
- * Note that as of v1.9, it is typically preferable to use mData to prepare data for
- * the different uses that DataTables can put the data to. Specifically mData when
- * used as a function will give you a 'type' (sorting, filtering etc) that you can use to
- * prepare the data as required for the different types. As such, this method is deprecated.
- * @type array
- * @default []
- * @deprecated
- *
- * @example
- * // Updating the cached sorting information with user entered values in HTML input elements
- * jQuery.fn.dataTableExt.afnSortData['dom-text'] = function ( oSettings, iColumn )
- * {
- * var aData = [];
- * $( 'td:eq('+iColumn+') input', oSettings.oApi._fnGetTrNodes(oSettings) ).each( function () {
- * aData.push( this.value );
- * } );
- * return aData;
- * }
- */
- "afnSortData": [],
-
-
- /**
- * Feature plug-ins - This is an array of objects which describe the feature plug-ins that are
- * available to DataTables. These feature plug-ins are accessible through the sDom initialisation
- * option. As such, each feature plug-in must describe a function that is used to initialise
- * itself (fnInit), a character so the feature can be enabled by sDom (cFeature) and the name
- * of the feature (sFeature). Thus the objects attached to this method must provide:
- *
- *
{function} fnInit Initialisation of the plug-in
- *
- *
- * Function input parameters:
- *
- *
{object} DataTables settings object: see {@link DataTable.models.oSettings}.
- *
- *
- *
- * Function return:
- *
- *
{node|null} The element which contains your feature. Note that the return
- * may also be void if your plug-in does not require to inject any DOM elements
- * into DataTables control (sDom) - for example this might be useful when
- * developing a plug-in which allows table control via keyboard entry.
- *
- *
- *
- *
- *
{character} cFeature Character that will be matched in sDom - case sensitive
- *
{string} sFeature Feature name
- *
- * @type array
- * @default []
- *
- * @example
- * // How TableTools initialises itself.
- * $.fn.dataTableExt.aoFeatures.push( {
- * "fnInit": function( oSettings ) {
- * return new TableTools( { "oDTSettings": oSettings } );
- * },
- * "cFeature": "T",
- * "sFeature": "TableTools"
- * } );
- */
- "aoFeatures": [],
-
-
- /**
- * Type detection plug-in functions - DataTables utilises types to define how sorting and
- * filtering behave, and types can be either be defined by the developer (sType for the
- * column) or they can be automatically detected by the methods in this array. The functions
- * defined in the array are quite simple, taking a single parameter (the data to analyse)
- * and returning the type if it is a known type, or null otherwise.
- *
- *
- * Function input parameters:
- *
- *
{*} Data from the column cell to be analysed
- *
- *
- *
- * Function return:
- *
- *
{string|null} Data type detected, or null if unknown (and thus pass it
- * on to the other type detection functions.
- *
- *
- *
- * @type array
- * @default []
- *
- * @example
- * // Currency type detection plug-in:
- * jQuery.fn.dataTableExt.aTypes.push(
- * function ( sData ) {
- * var sValidChars = "0123456789.-";
- * var Char;
- *
- * // Check the numeric part
- * for ( i=1 ; iafnSortData for filtering data.
- *
- *
- * Function input parameters:
- *
- *
{*} Data from the column cell to be prepared for filtering
- *
- *
- *
- * Function return:
- *
- *
{string|null} Formatted string that will be used for the filtering.
- *
- *
- *
- *
- * Note that as of v1.9, it is typically preferable to use mData to prepare data for
- * the different uses that DataTables can put the data to. Specifically mData when
- * used as a function will give you a 'type' (sorting, filtering etc) that you can use to
- * prepare the data as required for the different types. As such, this method is deprecated.
- * @type object
- * @default {}
- * @deprecated
- *
- * @example
- * $.fn.dataTableExt.ofnSearch['title-numeric'] = function ( sData ) {
- * return sData.replace(/\n/g," ").replace( /<.*?>/g, "" );
- * }
- */
- "ofnSearch": {},
-
-
- /**
- * Container for all private functions in DataTables so they can be exposed externally
- * @type object
- * @default {}
- */
- "oApi": {},
-
-
- /**
- * Storage for the various classes that DataTables uses
- * @type object
- * @default {}
- */
- "oStdClasses": {},
-
-
- /**
- * Storage for the various classes that DataTables uses - jQuery UI suitable
- * @type object
- * @default {}
- */
- "oJUIClasses": {},
-
-
- /**
- * Pagination plug-in methods - The style and controls of the pagination can significantly
- * impact on how the end user interacts with the data in your table, and DataTables allows
- * the addition of pagination controls by extending this object, which can then be enabled
- * through the sPaginationType initialisation parameter. Each pagination type that
- * is added is an object (the property name of which is what sPaginationType refers
- * to) that has two properties, both methods that are used by DataTables to update the
- * control's state.
- *
- *
- * fnInit - Initialisation of the paging controls. Called only during initialisation
- * of the table. It is expected that this function will add the required DOM elements
- * to the page for the paging controls to work. The element pointer
- * 'oSettings.aanFeatures.p' array is provided by DataTables to contain the paging
- * controls (note that this is a 2D array to allow for multiple instances of each
- * DataTables DOM element). It is suggested that you add the controls to this element
- * as children
- *
- *
- * Function input parameters:
- *
- *
{object} DataTables settings object: see {@link DataTable.models.oSettings}.
- *
{node} Container into which the pagination controls must be inserted
- *
{function} Draw callback function - whenever the controls cause a page
- * change, this method must be called to redraw the table.
- *
- *
- *
- * Function return:
- *
- *
No return required
- *
- *
- *
- *
- *
- * fnInit - This function is called whenever the paging status of the table changes and is
- * typically used to update classes and/or text of the paging controls to reflex the new
- * status.
- *
- *
- * Function input parameters:
- *
- *
{object} DataTables settings object: see {@link DataTable.models.oSettings}.
- *
{function} Draw callback function - in case you need to redraw the table again
- * or attach new event listeners
{int} Sorting match: <0 if first parameter should be sorted lower than
- * the second parameter, ===0 if the two parameters are equal and >0 if
- * the first parameter should be sorted height than the second parameter.
- *
- *
- *
- * @type object
- * @default {}
- *
- * @example
- * // Case-sensitive string sorting, with no pre-formatting method
- * $.extend( $.fn.dataTableExt.oSort, {
- * "string-case-asc": function(x,y) {
- * return ((x < y) ? -1 : ((x > y) ? 1 : 0));
- * },
- * "string-case-desc": function(x,y) {
- * return ((x < y) ? 1 : ((x > y) ? -1 : 0));
- * }
- * } );
- *
- * @example
- * // Case-insensitive string sorting, with pre-formatting
- * $.extend( $.fn.dataTableExt.oSort, {
- * "string-pre": function(x) {
- * return x.toLowerCase();
- * },
- * "string-asc": function(x,y) {
- * return ((x < y) ? -1 : ((x > y) ? 1 : 0));
- * },
- * "string-desc": function(x,y) {
- * return ((x < y) ? 1 : ((x > y) ? -1 : 0));
- * }
- * } );
- */
- "oSort": {},
-
-
- /**
- * Version string for plug-ins to check compatibility. Allowed format is
- * a.b.c.d.e where: a:int, b:int, c:int, d:string(dev|beta), e:int. d and
- * e are optional
- * @type string
- * @default Version number
- */
- "sVersion": DataTable.version,
-
-
- /**
- * How should DataTables report an error. Can take the value 'alert' or 'throw'
- * @type string
- * @default alert
- */
- "sErrMode": "alert",
-
-
- /**
- * Store information for DataTables to access globally about other instances
- * @namespace
- * @private
- */
- "_oExternConfig": {
- /* int:iNextUnique - next unique number for an instance */
- "iNextUnique": 0
- }
- };
-
-
-
/**
* Template object for the way in which DataTables holds information about
@@ -7499,7 +9426,7 @@
/**
* Template object for the way in which DataTables holds information about
- * each individual row. This is the object format used for the settings
+ * each individual row. This is the object format used for the settings
* aoData array.
* @namespace
*/
@@ -7511,11 +9438,19 @@
*/
"nTr": null,
+ /**
+ * Array of TD elements for each row. This is null until the row has been
+ * created.
+ * @type array nodes
+ * @default []
+ */
+ "anCells": null,
+
/**
* Data object from the original data source for the row. This is either
* an array if using the traditional form of DataTables, or an object if
* using mData options. The exact type will depend on the passed in
- * data from the data source, or will be an array if using DOM a data
+ * data from the data source, or will be an array if using DOM a data
* source.
* @type array|object
* @default []
@@ -7524,29 +9459,37 @@
/**
* Sorting data cache - this array is ostensibly the same length as the
- * number of columns (although each index is generated only as it is
+ * number of columns (although each index is generated only as it is
* needed), and holds the data that is used for sorting each column in the
* row. We do this cache generation at the start of the sort in order that
* the formatting of the sort data need be done only once for each cell
* per sort. This array should not be read from or written to by anything
* other than the master sorting methods.
* @type array
- * @default []
+ * @default null
* @private
*/
- "_aSortData": [],
+ "_aSortData": null,
/**
- * Array of TD elements that are cached for hidden rows, so they can be
- * reinserted into the table if a column is made visible again (or to act
- * as a store if a column is made hidden). Only hidden columns have a
- * reference in the array. For non-hidden columns the value is either
- * undefined or null.
- * @type array nodes
- * @default []
+ * Per cell filtering data cache. As per the sort data cache, used to
+ * increase the performance of the filtering in DataTables
+ * @type array
+ * @default null
* @private
*/
- "_anHidden": [],
+ "_aFilterData": null,
+
+ /**
+ * Filtering data cache. This is the same as the cell filtering cache, but
+ * in this case a string rather than an array. This is easily computed with
+ * a join on `_aFilterData`, but is provided as a cache so the join isn't
+ * needed on every search (memory traded for performance)
+ * @type array
+ * @default null
+ * @private
+ */
+ "_sFilterRow": null,
/**
* Cache of the class name that DataTables has applied to the row, so we
@@ -7556,23 +9499,50 @@
* @default Empty string
* @private
*/
- "_sRowStripe": ""
- };
+ "_sRowStripe": "",
+ /**
+ * Denote if the original data source was from the DOM, or the data source
+ * object. This is used for invalidating data, so DataTables can
+ * automatically read data from the original source, unless uninstructed
+ * otherwise.
+ * @type string
+ * @default null
+ * @private
+ */
+ "src": null,
+
+ /**
+ * Index in the aoData array. This saves an indexOf lookup when we have the
+ * object, but want to know the index
+ * @type integer
+ * @default -1
+ * @private
+ */
+ "idx": -1
+ };
/**
* Template object for the column information object in DataTables. This object
* is held in the settings aoColumns array and contains all the information that
* DataTables needs about each individual column.
- *
- * Note that this object is related to {@link DataTable.defaults.columns}
+ *
+ * Note that this object is related to {@link DataTable.defaults.column}
* but this one is the internal data store for DataTables's cache of columns.
* It should NOT be manipulated outside of DataTables. Any configuration should
* be done through the initialisation options.
* @namespace
*/
DataTable.models.oColumn = {
+ /**
+ * Column index. This could be worked out on-the-fly with $.inArray, but it
+ * is faster to just hold it as a variable
+ * @type integer
+ * @default null
+ */
+ "idx": null,
+
/**
* A list of the columns that sorting should occur on when this column
* is sorted. That this property is an array allows multi-column sorting
@@ -7593,49 +9563,44 @@
* @type array
*/
"asSorting": null,
-
+
/**
* Flag to indicate if the column is searchable, and thus should be included
* in the filtering or not.
* @type boolean
*/
"bSearchable": null,
-
+
/**
* Flag to indicate if the column is sortable or not.
* @type boolean
*/
"bSortable": null,
-
- /**
- * Deprecated When using fnRender, you have two options for what
- * to do with the data, and this property serves as the switch. Firstly, you
- * can have the sorting and filtering use the rendered value (true - default),
- * or you can have the sorting and filtering us the original value (false).
- *
- * Please note that this option has now been deprecated and will be removed
- * in the next version of DataTables. Please use mRender / mData rather than
- * fnRender.
- * @type boolean
- * @deprecated
- */
- "bUseRendered": null,
-
+
/**
* Flag to indicate if the column is currently visible in the table or not
* @type boolean
*/
"bVisible": null,
-
+
/**
- * Flag to indicate to the type detection method if the automatic type
- * detection should be used, or if a column type (sType) has been specified
- * @type boolean
- * @default true
+ * Store for manual type assignment using the `column.type` option. This
+ * is held in store so we can manipulate the column's `sType` property.
+ * @type string
+ * @default null
* @private
*/
- "_bAutoType": true,
-
+ "_sManualType": null,
+
+ /**
+ * Flag to indicate if HTML5 data attributes should be used as the data
+ * source for filtering or sorting. True is either are.
+ * @type boolean
+ * @default false
+ * @private
+ */
+ "_bAttrSrc": false,
+
/**
* Developer definable function that is called whenever a cell is created (Ajax source,
* etc) or processed for input (DOM source). This can be used as a compliment to mRender
@@ -7649,64 +9614,45 @@
* @default null
*/
"fnCreatedCell": null,
-
+
/**
* Function to get data from a cell in a column. You should never
* access data directly through _aData internally in DataTables - always use
* the method attached to this property. It allows mData to function as
- * required. This function is automatically assigned by the column
+ * required. This function is automatically assigned by the column
* initialisation method
* @type function
- * @param {array|object} oData The data array/object for the array
+ * @param {array|object} oData The data array/object for the array
* (i.e. aoData[]._aData)
- * @param {string} sSpecific The specific data type you want to get -
+ * @param {string} sSpecific The specific data type you want to get -
* 'display', 'type' 'filter' 'sort'
* @returns {*} The data for the cell from the given row's data
* @default null
*/
"fnGetData": null,
-
+
/**
- * Deprecated Custom display function that will be called for the
- * display of each cell in this column.
- *
- * Please note that this option has now been deprecated and will be removed
- * in the next version of DataTables. Please use mRender / mData rather than
- * fnRender.
- * @type function
- * @param {object} o Object with the following parameters:
- * @param {int} o.iDataRow The row in aoData
- * @param {int} o.iDataColumn The column in question
- * @param {array} o.aData The data for the row in question
- * @param {object} o.oSettings The settings object for this DataTables instance
- * @returns {string} The string you which to use in the display
- * @default null
- * @deprecated
- */
- "fnRender": null,
-
- /**
- * Function to set data for a cell in the column. You should never
+ * Function to set data for a cell in the column. You should never
* set the data directly to _aData internally in DataTables - always use
* this method. It allows mData to function as required. This function
* is automatically assigned by the column initialisation method
* @type function
- * @param {array|object} oData The data array/object for the array
+ * @param {array|object} oData The data array/object for the array
* (i.e. aoData[]._aData)
* @param {*} sValue Value to set
* @default null
*/
"fnSetData": null,
-
+
/**
- * Property to read the value for the cells in the column from the data
+ * Property to read the value for the cells in the column from the data
* source array / object. If null, then the default content is used, if a
* function is given then the return from the function is used.
* @type function|int|string|null
* @default null
*/
"mData": null,
-
+
/**
* Partner property to mData which is used (only when defined) to get
* the data - i.e. it is basically the same as mData, but without the
@@ -7716,7 +9662,7 @@
* @default null
*/
"mRender": null,
-
+
/**
* Unique header TH/TD element for this column - this is what the sorting
* listener is attached to (if sorting is enabled.)
@@ -7724,28 +9670,28 @@
* @default null
*/
"nTh": null,
-
+
/**
- * Unique footer TH/TD element for this column (if there is one). Not used
- * in DataTables as such, but can be used for plug-ins to reference the
+ * Unique footer TH/TD element for this column (if there is one). Not used
+ * in DataTables as such, but can be used for plug-ins to reference the
* footer for each column.
* @type node
* @default null
*/
"nTf": null,
-
+
/**
* The class to apply to all TD elements in the table's TBODY for the column
* @type string
* @default null
*/
"sClass": null,
-
+
/**
* When DataTables calculates the column widths to assign to each column,
* it finds the longest string in each column and then constructs a
* temporary table and reads the widths from that. The problem with this
- * is that "mmm" is much wider then "iiii", but the latter is a longer
+ * is that "mmm" is much wider then "iiii", but the latter is a longer
* string - thus the calculation can go wrong (doing it properly and putting
* it into an DOM object and measuring that is horribly(!) slow). Thus as
* a "work around" we provide this option. It will append its value to the
@@ -7753,7 +9699,7 @@
* @type string
*/
"sContentPadding": null,
-
+
/**
* Allows a default value to be given for a column's data, and will be used
* whenever a null data source is encountered (this can be because mData
@@ -7762,14 +9708,14 @@
* @default null
*/
"sDefaultContent": null,
-
+
/**
* Name for the column, allowing reference to the column by name as well as
* by index (needs a lookup to work by name).
* @type string
*/
"sName": null,
-
+
/**
* Custom sorting data type - defines which of the available plug-ins in
* afnSortData the custom sorting will use - if any is defined.
@@ -7777,14 +9723,14 @@
* @default std
*/
"sSortDataType": 'std',
-
+
/**
* Class to be applied to the header element when sorting on this column
* @type string
* @default null
*/
"sSortingClass": null,
-
+
/**
* Class to be applied to the header element when sorting on this column -
* when jQuery UI theming is used.
@@ -7792,27 +9738,27 @@
* @default null
*/
"sSortingClassJUI": null,
-
+
/**
* Title of the column - what is seen in the TH element (nTh).
* @type string
*/
"sTitle": null,
-
+
/**
* Column sorting and filtering type
* @type string
* @default null
*/
"sType": null,
-
+
/**
* Width of the column
* @type string
* @default null
*/
"sWidth": null,
-
+
/**
* Width of the column when it was first "encountered"
* @type string
@@ -7822,45 +9768,62 @@
};
+ /*
+ * Developer note: The properties of the object below are given in Hungarian
+ * notation, that was used as the interface for DataTables prior to v1.10, however
+ * from v1.10 onwards the primary interface is camel case. In order to avoid
+ * breaking backwards compatibility utterly with this change, the Hungarian
+ * version is still, internally the primary interface, but is is not documented
+ * - hence the @name tags in each doc comment. This allows a Javascript function
+ * to create a map from Hungarian notation to camel case (going the other direction
+ * would require each property to be listed, which would at around 3K to the size
+ * of DataTables, while this method is about a 0.5K hit.
+ *
+ * Ultimately this does pave the way for Hungarian notation to be dropped
+ * completely, but that is a massive amount of work and will break current
+ * installs (therefore is on-hold until v2).
+ */
/**
- * Initialisation options that can be given to DataTables at initialisation
+ * Initialisation options that can be given to DataTables at initialisation
* time.
* @namespace
*/
DataTable.defaults = {
/**
- * An array of data to use for the table, passed in at initialisation which
+ * An array of data to use for the table, passed in at initialisation which
* will be used in preference to any data which is already in the DOM. This is
* particularly useful for constructing tables purely in Javascript, for
* example with a custom Ajax call.
* @type array
* @default null
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.data
+ *
* @example
* // Using a 2D array data source
* $(document).ready( function () {
* $('#example').dataTable( {
- * "aaData": [
+ * "data": [
* ['Trident', 'Internet Explorer 4.0', 'Win 95+', 4, 'X'],
* ['Trident', 'Internet Explorer 5.0', 'Win 95+', 5, 'C'],
* ],
- * "aoColumns": [
- * { "sTitle": "Engine" },
- * { "sTitle": "Browser" },
- * { "sTitle": "Platform" },
- * { "sTitle": "Version" },
- * { "sTitle": "Grade" }
+ * "columns": [
+ * { "title": "Engine" },
+ * { "title": "Browser" },
+ * { "title": "Platform" },
+ * { "title": "Version" },
+ * { "title": "Grade" }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using an array of objects as a data source (mData)
+ * // Using an array of objects as a data source (`data`)
* $(document).ready( function () {
* $('#example').dataTable( {
- * "aaData": [
+ * "data": [
* {
* "engine": "Trident",
* "browser": "Internet Explorer 4.0",
@@ -7876,12 +9839,12 @@
* "grade": "C"
* }
* ],
- * "aoColumns": [
- * { "sTitle": "Engine", "mData": "engine" },
- * { "sTitle": "Browser", "mData": "browser" },
- * { "sTitle": "Platform", "mData": "platform" },
- * { "sTitle": "Version", "mData": "version" },
- * { "sTitle": "Grade", "mData": "grade" }
+ * "columns": [
+ * { "title": "Engine", "data": "engine" },
+ * { "title": "Browser", "data": "browser" },
+ * { "title": "Platform", "data": "platform" },
+ * { "title": "Version", "data": "version" },
+ * { "title": "Grade", "data": "grade" }
* ]
* } );
* } );
@@ -7890,27 +9853,29 @@
/**
- * If sorting is enabled, then DataTables will perform a first pass sort on
- * initialisation. You can define which column(s) the sort is performed upon,
- * and the sorting direction, with this variable. The aaSorting array should
- * contain an array for each column to be sorted initially containing the
- * column's index and a direction string ('asc' or 'desc').
+ * If ordering is enabled, then DataTables will perform a first pass sort on
+ * initialisation. You can define which column(s) the sort is performed
+ * upon, and the sorting direction, with this variable. The `sorting` array
+ * should contain an array for each column to be sorted initially containing
+ * the column's index and a direction string ('asc' or 'desc').
* @type array
* @default [[0,'asc']]
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.order
+ *
* @example
* // Sort by 3rd column first, and then 4th column
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aaSorting": [[2,'asc'], [3,'desc']]
+ * "order": [[2,'asc'], [3,'desc']]
* } );
* } );
- *
+ *
* // No initial sorting
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aaSorting": []
+ * "order": []
* } );
* } );
*/
@@ -7918,52 +9883,205 @@
/**
- * This parameter is basically identical to the aaSorting parameter, but
- * cannot be overridden by user interaction with the table. What this means
- * is that you could have a column (visible or hidden) which the sorting will
- * always be forced on first - any sorting after that (from the user) will
- * then be performed as required. This can be useful for grouping rows
+ * This parameter is basically identical to the `sorting` parameter, but
+ * cannot be overridden by user interaction with the table. What this means
+ * is that you could have a column (visible or hidden) which the sorting
+ * will always be forced on first - any sorting after that (from the user)
+ * will then be performed as required. This can be useful for grouping rows
* together.
* @type array
* @default null
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.orderFixed
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aaSortingFixed": [[0,'asc']]
+ * "orderFixed": [[0,'asc']]
* } );
* } )
*/
- "aaSortingFixed": null,
+ "aaSortingFixed": [],
+
+
+ /**
+ * DataTables can be instructed to load data to display in the table from a
+ * Ajax source. This option defines how that Ajax call is made and where to.
+ *
+ * The `ajax` property has three different modes of operation, depending on
+ * how it is defined. These are:
+ *
+ * * `string` - Set the URL from where the data should be loaded from.
+ * * `object` - Define properties for `jQuery.ajax`.
+ * * `function` - Custom data get function
+ *
+ * `string`
+ * --------
+ *
+ * As a string, the `ajax` property simply defines the URL from which
+ * DataTables will load data.
+ *
+ * `object`
+ * --------
+ *
+ * As an object, the parameters in the object are passed to
+ * [jQuery.ajax](http://api.jquery.com/jQuery.ajax/) allowing fine control
+ * of the Ajax request. DataTables has a number of default parameters which
+ * you can override using this option. Please refer to the jQuery
+ * documentation for a full description of the options available, although
+ * the following parameters provide additional options in DataTables or
+ * require special consideration:
+ *
+ * * `data` - As with jQuery, `data` can be provided as an object, but it
+ * can also be used as a function to manipulate the data DataTables sends
+ * to the server. The function takes a single parameter, an object of
+ * parameters with the values that DataTables has readied for sending. An
+ * object may be returned which will be merged into the DataTables
+ * defaults, or you can add the items to the object that was passed in and
+ * not return anything from the function. This supersedes `fnServerParams`
+ * from DataTables 1.9-.
+ *
+ * * `dataSrc` - By default DataTables will look for the property `data` (or
+ * `aaData` for compatibility with DataTables 1.9-) when obtaining data
+ * from an Ajax source or for server-side processing - this parameter
+ * allows that property to be changed. You can use Javascript dotted
+ * object notation to get a data source for multiple levels of nesting, or
+ * it my be used as a function. As a function it takes a single parameter,
+ * the JSON returned from the server, which can be manipulated as
+ * required, with the returned value being that used by DataTables as the
+ * data source for the table. This supersedes `sAjaxDataProp` from
+ * DataTables 1.9-.
+ *
+ * * `success` - Should not be overridden it is used internally in
+ * DataTables. To manipulate / transform the data returned by the server
+ * use `ajax.dataSrc`, or use `ajax` as a function (see below).
+ *
+ * `function`
+ * ----------
+ *
+ * As a function, making the Ajax call is left up to yourself allowing
+ * complete control of the Ajax request. Indeed, if desired, a method other
+ * than Ajax could be used to obtain the required data, such as Web storage
+ * or an AIR database.
+ *
+ * The function is given four parameters and no return is required. The
+ * parameters are:
+ *
+ * 1. _object_ - Data to send to the server
+ * 2. _function_ - Callback function that must be executed when the required
+ * data has been obtained. That data should be passed into the callback
+ * as the only parameter
+ * 3. _object_ - DataTables settings object for the table
+ *
+ * Note that this supersedes `fnServerData` from DataTables 1.9-.
+ *
+ * @type string|object|function
+ * @default null
+ *
+ * @dtopt Option
+ * @name DataTable.defaults.ajax
+ * @since 1.10.0
+ *
+ * @example
+ * // Get JSON data from a file via Ajax.
+ * // Note DataTables expects data in the form `{ data: [ ...data... ] }` by default).
+ * $('#example').dataTable( {
+ * "ajax": "data.json"
+ * } );
+ *
+ * @example
+ * // Get JSON data from a file via Ajax, using `dataSrc` to change
+ * // `data` to `tableData` (i.e. `{ tableData: [ ...data... ] }`)
+ * $('#example').dataTable( {
+ * "ajax": {
+ * "url": "data.json",
+ * "dataSrc": "tableData"
+ * }
+ * } );
+ *
+ * @example
+ * // Get JSON data from a file via Ajax, using `dataSrc` to read data
+ * // from a plain array rather than an array in an object
+ * $('#example').dataTable( {
+ * "ajax": {
+ * "url": "data.json",
+ * "dataSrc": ""
+ * }
+ * } );
+ *
+ * @example
+ * // Manipulate the data returned from the server - add a link to data
+ * // (note this can, should, be done using `render` for the column - this
+ * // is just a simple example of how the data can be manipulated).
+ * $('#example').dataTable( {
+ * "ajax": {
+ * "url": "data.json",
+ * "dataSrc": function ( json ) {
+ * for ( var i=0, ien=json.length ; iView message';
+ * }
+ * return json;
+ * }
+ * }
+ * } );
+ *
+ * @example
+ * // Add data to the request
+ * $('#example').dataTable( {
+ * "ajax": {
+ * "url": "data.json",
+ * "data": function ( d ) {
+ * return {
+ * "extra_search": $('#extra').val()
+ * };
+ * }
+ * }
+ * } );
+ *
+ * @example
+ * // Send request as POST
+ * $('#example').dataTable( {
+ * "ajax": {
+ * "url": "data.json",
+ * "type": "POST"
+ * }
+ * } );
+ *
+ * @example
+ * // Get the data from localStorage (could interface with a form for
+ * // adding, editing and removing rows).
+ * $('#example').dataTable( {
+ * "ajax": function (data, callback, settings) {
+ * callback(
+ * JSON.parse( localStorage.getItem('dataTablesData') )
+ * );
+ * }
+ * } );
+ */
+ "ajax": null,
/**
* This parameter allows you to readily specify the entries in the length drop
- * down menu that DataTables shows when pagination is enabled. It can be
- * either a 1D array of options which will be used for both the displayed
- * option and the value, or a 2D array which will use the array in the first
- * position as the value, and the array in the second position as the
+ * down menu that DataTables shows when pagination is enabled. It can be
+ * either a 1D array of options which will be used for both the displayed
+ * option and the value, or a 2D array which will use the array in the first
+ * position as the value, and the array in the second position as the
* displayed options (useful for language strings such as 'All').
+ *
+ * Note that the `pageLength` property will be automatically set to the
+ * first value given in this array, unless `pageLength` is also provided.
* @type array
* @default [ 10, 25, 50, 100 ]
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.lengthMenu
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aLengthMenu": [[10, 25, 50, -1], [10, 25, 50, "All"]]
- * } );
- * } );
- *
- * @example
- * // Setting the default display length as well as length menu
- * // This is likely to be wanted if you remove the '10' option which
- * // is the iDisplayLength default.
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "iDisplayLength": 25,
- * "aLengthMenu": [[25, 50, 100, -1], [25, 50, 100, "All"]]
+ * "lengthMenu": [[10, 25, 50, -1], [10, 25, 50, "All"]]
* } );
* } );
*/
@@ -7971,25 +10089,27 @@
/**
- * The aoColumns option in the initialisation parameter allows you to define
+ * The `columns` option in the initialisation parameter allows you to define
* details about the way individual columns behave. For a full list of
- * column options that can be set, please see
- * {@link DataTable.defaults.columns}. Note that if you use aoColumns to
+ * column options that can be set, please see
+ * {@link DataTable.defaults.column}. Note that if you use `columns` to
* define your columns, you must have an entry in the array for every single
* column that you have in your table (these can be null if you don't which
* to specify any options).
* @member
+ *
+ * @name DataTable.defaults.column
*/
"aoColumns": null,
/**
- * Very similar to aoColumns, aoColumnDefs allows you to target a specific
- * column, multiple columns, or all columns, using the aTargets property of
- * each object in the array. This allows great flexibility when creating
- * tables, as the aoColumnDefs arrays can be of any length, targeting the
- * columns you specifically want. aoColumnDefs may use any of the column
- * options available: {@link DataTable.defaults.columns}, but it _must_
- * have aTargets defined in each object in the array. Values in the aTargets
+ * Very similar to `columns`, `columnDefs` allows you to target a specific
+ * column, multiple columns, or all columns, using the `targets` property of
+ * each object in the array. This allows great flexibility when creating
+ * tables, as the `columnDefs` arrays can be of any length, targeting the
+ * columns you specifically want. `columnDefs` may use any of the column
+ * options available: {@link DataTable.defaults.column}, but it _must_
+ * have `targets` defined in each object in the array. Values in the `targets`
* array may be:
*
*
a string - class name will be matched on the TH for the column
@@ -7998,28 +10118,32 @@
*
the string "_all" - all columns (i.e. assign a default)
*
* @member
+ *
+ * @name DataTable.defaults.columnDefs
*/
"aoColumnDefs": null,
/**
- * Basically the same as oSearch, this parameter defines the individual column
- * filtering state at initialisation time. The array must be of the same size
+ * Basically the same as `search`, this parameter defines the individual column
+ * filtering state at initialisation time. The array must be of the same size
* as the number of columns, and each element be an object with the parameters
- * "sSearch" and "bEscapeRegex" (the latter is optional). 'null' is also
+ * `search` and `escapeRegex` (the latter is optional). 'null' is also
* accepted and the default will be used.
* @type array
* @default []
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.searchCols
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoSearchCols": [
+ * "searchCols": [
* null,
- * { "sSearch": "My filter" },
+ * { "search": "My filter" },
* null,
- * { "sSearch": "^[0-9]", "bEscapeRegex": false }
+ * { "search": "^[0-9]", "escapeRegex": false }
* ]
* } );
* } )
@@ -8028,18 +10152,20 @@
/**
- * An array of CSS classes that should be applied to displayed rows. This
- * array may be of any length, and DataTables will apply each class
+ * An array of CSS classes that should be applied to displayed rows. This
+ * array may be of any length, and DataTables will apply each class
* sequentially, looping when required.
* @type array
- * @default null Will take the values determined by the oClasses.sStripe*
+ * @default null Will take the values determined by the `oClasses.stripe*`
* options
+ *
* @dtopt Option
- *
+ * @name DataTable.defaults.stripeClasses
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "asStripeClasses": [ 'strip1', 'strip2', 'strip3' ]
+ * "stripeClasses": [ 'strip1', 'strip2', 'strip3' ]
* } );
* } )
*/
@@ -8049,15 +10175,17 @@
/**
* Enable or disable automatic column width calculation. This can be disabled
* as an optimisation (it takes some time to calculate the widths) if the
- * tables widths are passed in using aoColumns.
+ * tables widths are passed in using `columns`.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.autoWidth
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bAutoWidth": false
+ * "autoWidth": false
* } );
* } );
*/
@@ -8072,13 +10200,15 @@
* time.
* @type boolean
* @default false
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.deferRender
+ *
* @example
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "sAjaxSource": "sources/arrays.txt",
- * "bDeferRender": true
+ * $('#example').dataTable( {
+ * "ajax": "sources/arrays.txt",
+ * "deferRender": true
* } );
* } );
*/
@@ -8086,25 +10216,27 @@
/**
- * Replace a DataTable which matches the given selector and replace it with
+ * Replace a DataTable which matches the given selector and replace it with
* one which has the properties of the new initialisation object passed. If no
* table matches the selector, then the new DataTable will be constructed as
* per normal.
* @type boolean
* @default false
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.destroy
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sScrollY": "200px",
- * "bPaginate": false
+ * "srollY": "200px",
+ * "paginate": false
* } );
- *
+ *
* // Some time later....
* $('#example').dataTable( {
- * "bFilter": false,
- * "bDestroy": true
+ * "filter": false,
+ * "destroy": true
* } );
* } );
*/
@@ -8118,15 +10250,17 @@
* specified (this allow matching across multiple columns). Note that if you
* wish to use filtering in DataTables this must remain 'true' - to remove the
* default filtering input box and retain filtering abilities, please use
- * {@link DataTable.defaults.sDom}.
+ * {@link DataTable.defaults.dom}.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.searching
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bFilter": false
+ * "searching": false
* } );
* } );
*/
@@ -8134,17 +10268,19 @@
/**
- * Enable or disable the table information display. This shows information
+ * Enable or disable the table information display. This shows information
* about the data that is currently visible on the page, including information
* about filtered data if that action is being performed.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.info
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bInfo": false
+ * "info": false
* } );
* } );
*/
@@ -8157,12 +10293,14 @@
* traditionally used).
* @type boolean
* @default false
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.jQueryUI
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bJQueryUI": true
+ * "jQueryUI": true
* } );
* } );
*/
@@ -8171,15 +10309,17 @@
/**
* Allows the end user to select the size of a formatted page from a select
- * menu (sizes are 10, 25, 50 and 100). Requires pagination (bPaginate).
+ * menu (sizes are 10, 25, 50 and 100). Requires pagination (`paginate`).
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.lengthChange
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bLengthChange": false
+ * "lengthChange": false
* } );
* } );
*/
@@ -8190,12 +10330,14 @@
* Enable or disable pagination.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.paging
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bPaginate": false
+ * "paging": false
* } );
* } );
*/
@@ -8209,12 +10351,14 @@
* the entries.
* @type boolean
* @default false
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.processing
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bProcessing": true
+ * "processing": true
* } );
* } );
*/
@@ -8227,55 +10371,38 @@
* to simply return the object that has already been set up - it will not take
* account of any changes you might have made to the initialisation object
* passed to DataTables (setting this parameter to true is an acknowledgement
- * that you understand this). bDestroy can be used to reinitialise a table if
+ * that you understand this). `destroy` can be used to reinitialise a table if
* you need.
* @type boolean
* @default false
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.retrieve
+ *
* @example
* $(document).ready( function() {
* initTable();
* tableActions();
* } );
- *
+ *
* function initTable ()
* {
* return $('#example').dataTable( {
- * "sScrollY": "200px",
- * "bPaginate": false,
- * "bRetrieve": true
+ * "scrollY": "200px",
+ * "paginate": false,
+ * "retrieve": true
* } );
* }
- *
+ *
* function tableActions ()
* {
- * var oTable = initTable();
- * // perform API operations with oTable
+ * var table = initTable();
+ * // perform API operations with oTable
* }
*/
"bRetrieve": false,
- /**
- * Indicate if DataTables should be allowed to set the padding / margin
- * etc for the scrolling header elements or not. Typically you will want
- * this.
- * @type boolean
- * @default true
- * @dtopt Options
- *
- * @example
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bScrollAutoCss": false,
- * "sScrollY": "200px"
- * } );
- * } );
- */
- "bScrollAutoCss": true,
-
-
/**
* When vertical (y) scrolling is enabled, DataTables will force the height of
* the table's viewport to the given height at all times (useful for layout).
@@ -8285,56 +10412,37 @@
* the result set will fit within the given Y height.
* @type boolean
* @default false
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.scrollCollapse
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sScrollY": "200",
- * "bScrollCollapse": true
+ * "scrollY": "200",
+ * "scrollCollapse": true
* } );
* } );
*/
"bScrollCollapse": false,
- /**
- * Enable infinite scrolling for DataTables (to be used in combination with
- * sScrollY). Infinite scrolling means that DataTables will continually load
- * data as a user scrolls through a table, which is very useful for large
- * dataset. This cannot be used with pagination, which is automatically
- * disabled. Note - the Scroller extra for DataTables is recommended in
- * in preference to this option.
- * @type boolean
- * @default false
- * @dtopt Features
- *
- * @example
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bScrollInfinite": true,
- * "bScrollCollapse": true,
- * "sScrollY": "200px"
- * } );
- * } );
- */
- "bScrollInfinite": false,
-
-
/**
* Configure DataTables to use server-side processing. Note that the
- * sAjaxSource parameter must also be given in order to give DataTables a
+ * `ajax` parameter must also be given in order to give DataTables a
* source to obtain the required data for each draw.
* @type boolean
* @default false
+ *
* @dtopt Features
* @dtopt Server-side
- *
+ * @name DataTable.defaults.serverSide
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bServerSide": true,
- * "sAjaxSource": "xhr.php"
+ * "serverSide": true,
+ * "ajax": "xhr.php"
* } );
* } );
*/
@@ -8343,33 +10451,57 @@
/**
* Enable or disable sorting of columns. Sorting of individual columns can be
- * disabled by the "bSortable" option for each column.
+ * disabled by the `sortable` option for each column.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.ordering
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bSort": false
+ * "ordering": false
* } );
* } );
*/
"bSort": true,
+ /**
+ * Enable or display DataTables' ability to sort multiple columns at the
+ * same time (activated by shift-click by the user).
+ * @type boolean
+ * @default true
+ *
+ * @dtopt Options
+ * @name DataTable.defaults.orderMulti
+ *
+ * @example
+ * // Disable multiple column sorting ability
+ * $(document).ready( function () {
+ * $('#example').dataTable( {
+ * "orderMulti": false
+ * } );
+ * } );
+ */
+ "bSortMulti": true,
+
+
/**
* Allows control over whether DataTables should use the top (true) unique
* cell that is found for a single column, or the bottom (false - default).
* This is useful when using complex headers.
* @type boolean
* @default false
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.orderCellsTop
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bSortCellsTop": true
+ * "orderCellsTop": true
* } );
* } );
*/
@@ -8377,19 +10509,21 @@
/**
- * Enable or disable the addition of the classes 'sorting_1', 'sorting_2' and
- * 'sorting_3' to the columns which are currently being sorted on. This is
+ * Enable or disable the addition of the classes `sorting\_1`, `sorting\_2` and
+ * `sorting\_3` to the columns which are currently being sorted on. This is
* presented as a feature switch as it can increase processing time (while
* classes are removed and added) so for large data sets you might want to
* turn this off.
* @type boolean
* @default true
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.orderClasses
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bSortClasses": false
+ * "orderClasses": false
* } );
* } );
*/
@@ -8397,70 +10531,50 @@
/**
- * Enable or disable state saving. When enabled a cookie will be used to save
- * table display information such as pagination information, display length,
- * filtering and sorting. As such when the end user reloads the page the
- * display display will match what thy had previously set up.
+ * Enable or disable state saving. When enabled HTML5 `localStorage` will be
+ * used to save table display information such as pagination information,
+ * display length, filtering and sorting. As such when the end user reloads
+ * the page the display display will match what thy had previously set up.
+ *
+ * Due to the use of `localStorage` the default state saving is not supported
+ * in IE6 or 7. If state saving is required in those browsers, use
+ * `stateSaveCallback` to provide a storage solution such as cookies.
* @type boolean
* @default false
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.stateSave
+ *
* @example
* $(document).ready( function () {
* $('#example').dataTable( {
- * "bStateSave": true
+ * "stateSave": true
* } );
* } );
*/
"bStateSave": false,
- /**
- * Customise the cookie and / or the parameters being stored when using
- * DataTables with state saving enabled. This function is called whenever
- * the cookie is modified, and it expects a fully formed cookie string to be
- * returned. Note that the data object passed in is a Javascript object which
- * must be converted to a string (JSON.stringify for example).
- * @type function
- * @param {string} sName Name of the cookie defined by DataTables
- * @param {object} oData Data to be stored in the cookie
- * @param {string} sExpires Cookie expires string
- * @param {string} sPath Path of the cookie to set
- * @returns {string} Cookie formatted string (which should be encoded by
- * using encodeURIComponent())
- * @dtopt Callbacks
- *
- * @example
- * $(document).ready( function () {
- * $('#example').dataTable( {
- * "fnCookieCallback": function (sName, oData, sExpires, sPath) {
- * // Customise oData or sName or whatever else here
- * return sName + "="+JSON.stringify(oData)+"; expires=" + sExpires +"; path=" + sPath;
- * }
- * } );
- * } );
- */
- "fnCookieCallback": null,
-
-
/**
* This function is called when a TR element is created (and all TD child
* elements have been inserted), or registered if using a DOM source, allowing
* manipulation of the TR element (adding classes etc).
* @type function
- * @param {node} nRow "TR" element for the current row
- * @param {array} aData Raw data array for this row
- * @param {int} iDataIndex The index of this row in aoData
+ * @param {node} row "TR" element for the current row
+ * @param {array} data Raw data array for this row
+ * @param {int} dataIndex The index of this row in the internal aoData array
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.createdRow
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "fnCreatedRow": function( nRow, aData, iDataIndex ) {
+ * "createdRow": function( row, data, dataIndex ) {
* // Bold the grade for all 'A' grade browsers
- * if ( aData[4] == "A" )
+ * if ( data[4] == "A" )
* {
- * $('td:eq(4)', nRow).html( 'A' );
+ * $('td:eq(4)', row).html( 'A' );
* }
* }
* } );
@@ -8473,13 +10587,15 @@
* This function is called on every 'draw' event, and allows you to
* dynamically modify any aspect you want about the created DOM.
* @type function
- * @param {object} oSettings DataTables settings object
+ * @param {object} settings DataTables settings object
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.drawCallback
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "fnDrawCallback": function( oSettings ) {
+ * "drawCallback": function( settings ) {
* alert( 'DataTables has redrawn the table' );
* }
* } );
@@ -8490,23 +10606,25 @@
/**
* Identical to fnHeaderCallback() but for the table footer this function
- * allows you to modify the table footer on every 'draw' even.
+ * allows you to modify the table footer on every 'draw' event.
* @type function
- * @param {node} nFoot "TR" element for the footer
- * @param {array} aData Full table data (as derived from the original HTML)
- * @param {int} iStart Index for the current display starting point in the
+ * @param {node} foot "TR" element for the footer
+ * @param {array} data Full table data (as derived from the original HTML)
+ * @param {int} start Index for the current display starting point in the
* display array
- * @param {int} iEnd Index for the current display ending point in the
+ * @param {int} end Index for the current display ending point in the
* display array
- * @param {array int} aiDisplay Index array to translate the visual position
+ * @param {array int} display Index array to translate the visual position
* to the full data array
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.footerCallback
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "fnFooterCallback": function( nFoot, aData, iStart, iEnd, aiDisplay ) {
- * nFoot.getElementsByTagName('th')[0].innerHTML = "Starting index is "+iStart;
+ * "footerCallback": function( tfoot, data, start, end, display ) {
+ * tfoot.getElementsByTagName('th')[0].innerHTML = "Starting index is "+start;
* }
* } );
* } )
@@ -8522,52 +10640,30 @@
* function will override the default method DataTables uses.
* @type function
* @member
- * @param {int} iIn number to be formatted
+ * @param {int} toFormat number to be formatted
* @returns {string} formatted string for DataTables to show the number
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.formatNumber
+ *
* @example
+ * // Format a number using a single quote for the separator (note that
+ * // this can also be done with the language.thousands option)
* $(document).ready( function() {
* $('#example').dataTable( {
- * "fnFormatNumber": function ( iIn ) {
- * if ( iIn < 1000 ) {
- * return iIn;
- * } else {
- * var
- * s=(iIn+""),
- * a=s.split(""), out="",
- * iLen=s.length;
- *
- * for ( var i=0 ; i<iLen ; i++ ) {
- * if ( i%3 === 0 && i !== 0 ) {
- * out = "'"+out;
- * }
- * out = a[iLen-i-1]+out;
- * }
- * }
- * return out;
+ * "formatNumber": function ( toFormat ) {
+ * return toFormat.toString().replace(
+ * /\B(?=(\d{3})+(?!\d))/g, "'"
+ * );
* };
* } );
* } );
*/
- "fnFormatNumber": function ( iIn ) {
- if ( iIn < 1000 )
- {
- // A small optimisation for what is likely to be the majority of use cases
- return iIn;
- }
-
- var s=(iIn+""), a=s.split(""), out="", iLen=s.length;
-
- for ( var i=0 ; iA' );
+ * if ( data[4] == "A" ) {
+ * $('td:eq(4)', row).html( 'A' );
* }
* }
* } );
@@ -8702,114 +10807,77 @@
/**
+ * __Deprecated__ The functionality provided by this parameter has now been
+ * superseded by that provided through `ajax`, which should be used instead.
+ *
* This parameter allows you to override the default function which obtains
- * the data from the server ($.getJSON) so something more suitable for your
- * application. For example you could use POST data, or pull information from
- * a Gears or AIR database.
+ * the data from the server so something more suitable for your application.
+ * For example you could use POST data, or pull information from a Gears or
+ * AIR database.
* @type function
* @member
- * @param {string} sSource HTTP source to obtain the data from (sAjaxSource)
- * @param {array} aoData A key/value pair object containing the data to send
+ * @param {string} source HTTP source to obtain the data from (`ajax`)
+ * @param {array} data A key/value pair object containing the data to send
* to the server
- * @param {function} fnCallback to be called on completion of the data get
+ * @param {function} callback to be called on completion of the data get
* process that will draw the data on the page.
- * @param {object} oSettings DataTables settings object
+ * @param {object} settings DataTables settings object
+ *
* @dtopt Callbacks
* @dtopt Server-side
- *
- * @example
- * // POST data to server
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bProcessing": true,
- * "bServerSide": true,
- * "sAjaxSource": "xhr.php",
- * "fnServerData": function ( sSource, aoData, fnCallback, oSettings ) {
- * oSettings.jqXHR = $.ajax( {
- * "dataType": 'json',
- * "type": "POST",
- * "url": sSource,
- * "data": aoData,
- * "success": fnCallback
- * } );
- * }
- * } );
- * } );
+ * @name DataTable.defaults.serverData
+ *
+ * @deprecated 1.10. Please use `ajax` for this functionality now.
*/
- "fnServerData": function ( sUrl, aoData, fnCallback, oSettings ) {
- oSettings.jqXHR = $.ajax( {
- "url": sUrl,
- "data": aoData,
- "success": function (json) {
- if ( json.sError ) {
- oSettings.oApi._fnLog( oSettings, 0, json.sError );
- }
-
- $(oSettings.oInstance).trigger('xhr', [oSettings, json]);
- fnCallback( json );
- },
- "dataType": "json",
- "cache": false,
- "type": oSettings.sServerMethod,
- "error": function (xhr, error, thrown) {
- if ( error == "parsererror" ) {
- oSettings.oApi._fnLog( oSettings, 0, "DataTables warning: JSON data from "+
- "server could not be parsed. This is caused by a JSON formatting error." );
- }
- }
- } );
- },
+ "fnServerData": null,
/**
- * It is often useful to send extra data to the server when making an Ajax
+ * __Deprecated__ The functionality provided by this parameter has now been
+ * superseded by that provided through `ajax`, which should be used instead.
+ *
+ * It is often useful to send extra data to the server when making an Ajax
* request - for example custom filtering information, and this callback
* function makes it trivial to send extra information to the server. The
* passed in parameter is the data set that has been constructed by
* DataTables, and you can add to this or modify it as you require.
* @type function
- * @param {array} aoData Data array (array of objects which are name/value
+ * @param {array} data Data array (array of objects which are name/value
* pairs) that has been constructed by DataTables and will be sent to the
* server. In the case of Ajax sourced data with server-side processing
* this will be an empty array, for server-side processing there will be a
* significant number of parameters!
- * @returns {undefined} Ensure that you modify the aoData array passed in,
+ * @returns {undefined} Ensure that you modify the data array passed in,
* as this is passed by reference.
+ *
* @dtopt Callbacks
* @dtopt Server-side
- *
- * @example
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bProcessing": true,
- * "bServerSide": true,
- * "sAjaxSource": "scripts/server_processing.php",
- * "fnServerParams": function ( aoData ) {
- * aoData.push( { "name": "more_data", "value": "my_value" } );
- * }
- * } );
- * } );
+ * @name DataTable.defaults.serverParams
+ *
+ * @deprecated 1.10. Please use `ajax` for this functionality now.
*/
"fnServerParams": null,
/**
* Load the table state. With this function you can define from where, and how, the
- * state of a table is loaded. By default DataTables will load from its state saving
- * cookie, but you might wish to use local storage (HTML5) or a server-side database.
+ * state of a table is loaded. By default DataTables will load from `localStorage`
+ * but you might wish to use a server-side database or cookies.
* @type function
* @member
- * @param {object} oSettings DataTables settings object
+ * @param {object} settings DataTables settings object
* @return {object} The DataTables state object to be loaded
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.stateLoadCallback
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateLoad": function (oSettings) {
+ * "stateSave": true,
+ * "stateLoadCallback": function (settings) {
* var o;
- *
+ *
* // Send an Ajax request to the server to get the data. Note that
* // this is a synchronous request.
* $.ajax( {
@@ -8820,55 +10888,53 @@
* o = json;
* }
* } );
- *
+ *
* return o;
* }
* } );
* } );
*/
- "fnStateLoad": function ( oSettings ) {
- var sData = this.oApi._fnReadCookie( oSettings.sCookiePrefix+oSettings.sInstance );
- var oData;
-
+ "fnStateLoadCallback": function ( settings ) {
try {
- oData = (typeof $.parseJSON === 'function') ?
- $.parseJSON(sData) : eval( '('+sData+')' );
- } catch (e) {
- oData = null;
- }
-
- return oData;
+ return JSON.parse(
+ (settings.iStateDuration === -1 ? sessionStorage : localStorage).getItem(
+ 'DataTables_'+settings.sInstance+'_'+location.pathname
+ )
+ );
+ } catch (e) {}
},
/**
* Callback which allows modification of the saved state prior to loading that state.
* This callback is called when the table is loading state from the stored data, but
- * prior to the settings object being modified by the saved state. Note that for
- * plug-in authors, you should use the 'stateLoadParams' event to load parameters for
+ * prior to the settings object being modified by the saved state. Note that for
+ * plug-in authors, you should use the `stateLoadParams` event to load parameters for
* a plug-in.
* @type function
- * @param {object} oSettings DataTables settings object
- * @param {object} oData The state object that is to be loaded
+ * @param {object} settings DataTables settings object
+ * @param {object} data The state object that is to be loaded
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.stateLoadParams
+ *
* @example
* // Remove a saved filter, so filtering is never loaded
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateLoadParams": function (oSettings, oData) {
- * oData.oSearch.sSearch = "";
+ * "stateSave": true,
+ * "stateLoadParams": function (settings, data) {
+ * data.oSearch.sSearch = "";
* }
* } );
* } );
- *
+ *
* @example
* // Disallow state loading by returning false
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateLoadParams": function (oSettings, oData) {
+ * "stateSave": true,
+ * "stateLoadParams": function (settings, data) {
* return false;
* }
* } );
@@ -8881,17 +10947,19 @@
* Callback that is called when the state has been loaded from the state saving method
* and the DataTables settings object has been modified as a result of the loaded state.
* @type function
- * @param {object} oSettings DataTables settings object
- * @param {object} oData The state object that was loaded
+ * @param {object} settings DataTables settings object
+ * @param {object} data The state object that was loaded
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.stateLoaded
+ *
* @example
* // Show an alert with the filtering value that was saved
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateLoaded": function (oSettings, oData) {
- * alert( 'Saved filter was: '+oData.oSearch.sSearch );
+ * "stateSave": true,
+ * "stateLoaded": function (settings, data) {
+ * alert( 'Saved filter was: '+data.oSearch.sSearch );
* }
* } );
* } );
@@ -8901,23 +10969,25 @@
/**
* Save the table state. This function allows you to define where and how the state
- * information for the table is stored - by default it will use a cookie, but you
- * might want to use local storage (HTML5) or a server-side database.
+ * information for the table is stored By default DataTables will use `localStorage`
+ * but you might wish to use a server-side database or cookies.
* @type function
* @member
- * @param {object} oSettings DataTables settings object
- * @param {object} oData The state object to be saved
+ * @param {object} settings DataTables settings object
+ * @param {object} data The state object to be saved
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.stateSaveCallback
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateSave": function (oSettings, oData) {
+ * "stateSave": true,
+ * "stateSaveCallback": function (settings, data) {
* // Send an Ajax request to the server with the state object
* $.ajax( {
* "url": "/state_save",
- * "data": oData,
+ * "data": data,
* "dataType": "json",
* "method": "POST"
* "success": function () {}
@@ -8926,35 +10996,36 @@
* } );
* } );
*/
- "fnStateSave": function ( oSettings, oData ) {
- this.oApi._fnCreateCookie(
- oSettings.sCookiePrefix+oSettings.sInstance,
- this.oApi._fnJsonString(oData),
- oSettings.iCookieDuration,
- oSettings.sCookiePrefix,
- oSettings.fnCookieCallback
- );
+ "fnStateSaveCallback": function ( settings, data ) {
+ try {
+ (settings.iStateDuration === -1 ? sessionStorage : localStorage).setItem(
+ 'DataTables_'+settings.sInstance+'_'+location.pathname,
+ JSON.stringify( data )
+ );
+ } catch (e) {}
},
/**
- * Callback which allows modification of the state to be saved. Called when the table
+ * Callback which allows modification of the state to be saved. Called when the table
* has changed state a new state save is required. This method allows modification of
- * the state saving object prior to actually doing the save, including addition or
- * other state properties or modification. Note that for plug-in authors, you should
- * use the 'stateSaveParams' event to save parameters for a plug-in.
+ * the state saving object prior to actually doing the save, including addition or
+ * other state properties or modification. Note that for plug-in authors, you should
+ * use the `stateSaveParams` event to save parameters for a plug-in.
* @type function
- * @param {object} oSettings DataTables settings object
- * @param {object} oData The state object to be saved
+ * @param {object} settings DataTables settings object
+ * @param {object} data The state object to be saved
+ *
* @dtopt Callbacks
- *
+ * @name DataTable.defaults.stateSaveParams
+ *
* @example
* // Remove a saved filter, so filtering is never saved
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bStateSave": true,
- * "fnStateSaveParams": function (oSettings, oData) {
- * oData.oSearch.sSearch = "";
+ * "stateSave": true,
+ * "stateSaveParams": function (settings, data) {
+ * data.oSearch.sSearch = "";
* }
* } );
* } );
@@ -8963,26 +11034,29 @@
/**
- * Duration of the cookie which is used for storing session information. This
- * value is given in seconds.
+ * Duration for which the saved state information is considered valid. After this period
+ * has elapsed the state will be returned to the default.
+ * Value is given in seconds.
* @type int
* @default 7200 (2 hours)
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.stateDuration
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "iCookieDuration": 60*60*24; // 1 day
+ * "stateDuration": 60*60*24; // 1 day
* } );
* } )
*/
- "iCookieDuration": 7200,
+ "iStateDuration": 7200,
/**
* When enabled DataTables will not make a request to the server for the first
* page draw - rather it will use the data already on the page (no sorting etc
- * will be applied to it), thus saving on an XHR at load time. iDeferLoading
+ * will be applied to it), thus saving on an XHR at load time. `deferLoading`
* is used to indicate that deferred loading is required, but it is also used
* to tell DataTables how many records there are in the full table (allowing
* the information element and pagination to be displayed correctly). In the case
@@ -8993,27 +11067,29 @@
* to be shown correctly).
* @type int | array
* @default null
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.deferLoading
+ *
* @example
* // 57 records available in the table, no filtering applied
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bServerSide": true,
- * "sAjaxSource": "scripts/server_processing.php",
- * "iDeferLoading": 57
+ * "serverSide": true,
+ * "ajax": "scripts/server_processing.php",
+ * "deferLoading": 57
* } );
* } );
- *
+ *
* @example
* // 57 records after filtering, 100 without filtering (an initial filter applied)
* $(document).ready( function() {
* $('#example').dataTable( {
- * "bServerSide": true,
- * "sAjaxSource": "scripts/server_processing.php",
- * "iDeferLoading": [ 57, 100 ],
- * "oSearch": {
- * "sSearch": "my_filter"
+ * "serverSide": true,
+ * "ajax": "scripts/server_processing.php",
+ * "deferLoading": [ 57, 100 ],
+ * "search": {
+ * "search": "my_filter"
* }
* } );
* } );
@@ -9023,16 +11099,18 @@
/**
* Number of rows to display on a single page when using pagination. If
- * feature enabled (bLengthChange) then the end user will be able to override
+ * feature enabled (`lengthChange`) then the end user will be able to override
* this to a custom setting using a pop-up menu.
* @type int
* @default 10
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.pageLength
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "iDisplayLength": 50
+ * "pageLength": 50
* } );
* } )
*/
@@ -9046,66 +11124,60 @@
* the third page, it should be "20".
* @type int
* @default 0
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.displayStart
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "iDisplayStart": 20
+ * "displayStart": 20
* } );
* } )
*/
"iDisplayStart": 0,
- /**
- * The scroll gap is the amount of scrolling that is left to go before
- * DataTables will load the next 'page' of data automatically. You typically
- * want a gap which is big enough that the scrolling will be smooth for the
- * user, while not so large that it will load more data than need.
- * @type int
- * @default 100
- * @dtopt Options
- *
- * @example
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bScrollInfinite": true,
- * "bScrollCollapse": true,
- * "sScrollY": "200px",
- * "iScrollLoadGap": 50
- * } );
- * } );
- */
- "iScrollLoadGap": 100,
-
-
/**
* By default DataTables allows keyboard navigation of the table (sorting, paging,
- * and filtering) by adding a tabindex attribute to the required elements. This
+ * and filtering) by adding a `tabindex` attribute to the required elements. This
* allows you to tab through the controls and press the enter key to activate them.
* The tabindex is default 0, meaning that the tab follows the flow of the document.
* You can overrule this using this parameter if you wish. Use a value of -1 to
* disable built-in keyboard navigation.
* @type int
* @default 0
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.tabIndex
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "iTabIndex": 1
+ * "tabIndex": 1
* } );
* } );
*/
"iTabIndex": 0,
+ /**
+ * Classes that DataTables assigns to the various components and features
+ * that it adds to the HTML table. This allows classes to be configured
+ * during initialisation in addition to through the static
+ * {@link DataTable.ext.oStdClasses} object).
+ * @namespace
+ * @name DataTable.defaults.classes
+ */
+ "oClasses": {},
+
+
/**
* All strings that DataTables uses in the user interface that it creates
* are defined in this object, allowing you to modified them individually or
* completely replace them all as required.
* @namespace
+ * @name DataTable.defaults.language
*/
"oLanguage": {
/**
@@ -9113,6 +11185,7 @@
* actually visible on the page, but will be read by screenreaders, and thus
* must be internationalised as well).
* @namespace
+ * @name DataTable.defaults.language.aria
*/
"oAria": {
/**
@@ -9121,14 +11194,16 @@
* Note that the column header is prefixed to this string.
* @type string
* @default : activate to sort column ascending
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.aria.sortAscending
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oAria": {
- * "sSortAscending": " - click/return to sort ascending"
+ * "language": {
+ * "aria": {
+ * "sortAscending": " - click/return to sort ascending"
* }
* }
* } );
@@ -9142,14 +11217,16 @@
* Note that the column header is prefixed to this string.
* @type string
* @default : activate to sort column ascending
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.aria.sortDescending
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oAria": {
- * "sSortDescending": " - click/return to sort descending"
+ * "language": {
+ * "aria": {
+ * "sortDescending": " - click/return to sort descending"
* }
* }
* } );
@@ -9159,9 +11236,10 @@
},
/**
- * Pagination string used by DataTables for the two built-in pagination
- * control types ("two_button" and "full_numbers")
+ * Pagination string used by DataTables for the built-in pagination
+ * control types.
* @namespace
+ * @name DataTable.defaults.language.paginate
*/
"oPaginate": {
/**
@@ -9169,77 +11247,85 @@
* button to take the user to the first page.
* @type string
* @default First
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.paginate.first
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oPaginate": {
- * "sFirst": "First page"
+ * "language": {
+ * "paginate": {
+ * "first": "First page"
* }
* }
* } );
* } );
*/
"sFirst": "First",
-
-
+
+
/**
* Text to use when using the 'full_numbers' type of pagination for the
* button to take the user to the last page.
* @type string
* @default Last
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.paginate.last
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oPaginate": {
- * "sLast": "Last page"
+ * "language": {
+ * "paginate": {
+ * "last": "Last page"
* }
* }
* } );
* } );
*/
"sLast": "Last",
-
-
+
+
/**
- * Text to use for the 'next' pagination button (to take the user to the
+ * Text to use for the 'next' pagination button (to take the user to the
* next page).
* @type string
* @default Next
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.paginate.next
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oPaginate": {
- * "sNext": "Next page"
+ * "language": {
+ * "paginate": {
+ * "next": "Next page"
* }
* }
* } );
* } );
*/
"sNext": "Next",
-
-
+
+
/**
- * Text to use for the 'previous' pagination button (to take the user to
+ * Text to use for the 'previous' pagination button (to take the user to
* the previous page).
* @type string
* @default Previous
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.paginate.previous
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "oPaginate": {
- * "sPrevious": "Previous page"
+ * "language": {
+ * "paginate": {
+ * "previous": "Previous page"
* }
* }
* } );
@@ -9247,130 +11333,182 @@
*/
"sPrevious": "Previous"
},
-
+
/**
- * This string is shown in preference to sZeroRecords when the table is
+ * This string is shown in preference to `zeroRecords` when the table is
* empty of data (regardless of filtering). Note that this is an optional
- * parameter - if it is not given, the value of sZeroRecords will be used
+ * parameter - if it is not given, the value of `zeroRecords` will be used
* instead (either the default or given value).
* @type string
* @default No data available in table
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.emptyTable
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sEmptyTable": "No data available in table"
+ * "language": {
+ * "emptyTable": "No data available in table"
* }
* } );
* } );
*/
"sEmptyTable": "No data available in table",
-
-
+
+
/**
- * This string gives information to the end user about the information that
- * is current on display on the page. The _START_, _END_ and _TOTAL_
- * variables are all dynamically replaced as the table display updates, and
- * can be freely moved or removed as the language requirements change.
+ * This string gives information to the end user about the information
+ * that is current on display on the page. The following tokens can be
+ * used in the string and will be dynamically replaced as the table
+ * display updates. This tokens can be placed anywhere in the string, or
+ * removed as needed by the language requires:
+ *
+ * * `\_START\_` - Display index of the first record on the current page
+ * * `\_END\_` - Display index of the last record on the current page
+ * * `\_TOTAL\_` - Number of records in the table after filtering
+ * * `\_MAX\_` - Number of records in the table without filtering
+ * * `\_PAGE\_` - Current page number
+ * * `\_PAGES\_` - Total number of pages of data in the table
+ *
* @type string
* @default Showing _START_ to _END_ of _TOTAL_ entries
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.info
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sInfo": "Got a total of _TOTAL_ entries to show (_START_ to _END_)"
+ * "language": {
+ * "info": "Showing page _PAGE_ of _PAGES_"
* }
* } );
* } );
*/
"sInfo": "Showing _START_ to _END_ of _TOTAL_ entries",
-
-
+
+
/**
- * Display information string for when the table is empty. Typically the
- * format of this string should match sInfo.
+ * Display information string for when the table is empty. Typically the
+ * format of this string should match `info`.
* @type string
* @default Showing 0 to 0 of 0 entries
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.infoEmpty
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sInfoEmpty": "No entries to show"
+ * "language": {
+ * "infoEmpty": "No entries to show"
* }
* } );
* } );
*/
"sInfoEmpty": "Showing 0 to 0 of 0 entries",
-
-
+
+
/**
- * When a user filters the information in a table, this string is appended
- * to the information (sInfo) to give an idea of how strong the filtering
+ * When a user filters the information in a table, this string is appended
+ * to the information (`info`) to give an idea of how strong the filtering
* is. The variable _MAX_ is dynamically updated.
* @type string
* @default (filtered from _MAX_ total entries)
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.infoFiltered
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sInfoFiltered": " - filtering from _MAX_ records"
+ * "language": {
+ * "infoFiltered": " - filtering from _MAX_ records"
* }
* } );
* } );
*/
"sInfoFiltered": "(filtered from _MAX_ total entries)",
-
-
+
+
/**
* If can be useful to append extra information to the info string at times,
* and this variable does exactly that. This information will be appended to
- * the sInfo (sInfoEmpty and sInfoFiltered in whatever combination they are
+ * the `info` (`infoEmpty` and `infoFiltered` in whatever combination they are
* being used) at all times.
* @type string
* @default Empty string
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.infoPostFix
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sInfoPostFix": "All records shown are derived from real information."
+ * "language": {
+ * "infoPostFix": "All records shown are derived from real information."
* }
* } );
* } );
*/
"sInfoPostFix": "",
-
-
+
+
/**
- * DataTables has a build in number formatter (fnFormatNumber) which is used
- * to format large numbers that are used in the table information. By
- * default a comma is used, but this can be trivially changed to any
- * character you wish with this parameter.
+ * This decimal place operator is a little different from the other
+ * language options since DataTables doesn't output floating point
+ * numbers, so it won't ever use this for display of a number. Rather,
+ * what this parameter does is modify the sort methods of the table so
+ * that numbers which are in a format which has a character other than
+ * a period (`.`) as a decimal place will be sorted numerically.
+ *
+ * Note that numbers with different decimal places cannot be shown in
+ * the same table and still be sortable, the table must be consistent.
+ * However, multiple different tables on the page can use different
+ * decimal place characters.
* @type string
- * @default ,
+ * @default
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.decimal
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sInfoThousands": "'"
+ * "language": {
+ * "decimal": ","
+ * "thousands": "."
* }
* } );
* } );
*/
- "sInfoThousands": ",",
-
-
+ "sDecimal": "",
+
+
+ /**
+ * DataTables has a build in number formatter (`formatNumber`) which is
+ * used to format large numbers that are used in the table information.
+ * By default a comma is used, but this can be trivially changed to any
+ * character you wish with this parameter.
+ * @type string
+ * @default ,
+ *
+ * @dtopt Language
+ * @name DataTable.defaults.language.thousands
+ *
+ * @example
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "language": {
+ * "thousands": "'"
+ * }
+ * } );
+ * } );
+ */
+ "sThousands": ",",
+
+
/**
* Detail the action that will be taken when the drop down menu for the
* pagination length option is changed. The '_MENU_' variable is replaced
@@ -9378,24 +11516,26 @@
* with a custom select box if required.
* @type string
* @default Show _MENU_ entries
+ *
* @dtopt Language
- *
+ * @name DataTable.defaults.language.lengthMenu
+ *
* @example
* // Language change only
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sLengthMenu": "Display _MENU_ records"
+ * "language": {
+ * "lengthMenu": "Display _MENU_ records"
* }
* } );
* } );
- *
+ *
* @example
* // Language and options change
* $(document).ready( function() {
* $('#example').dataTable( {
- * "oLanguage": {
- * "sLengthMenu": 'Display
*
* @type string
- * @default lfrtip (when bJQueryUI is false)or
- * <"H"lfr>t<"F"ip> (when bJQueryUI is true)
+ * @default lfrtip (when `jQueryUI` is false)or
+ * <"H"lfr>t<"F"ip> (when `jQueryUI` is true)
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.dom
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sDom": '<"top"i>rt<"bottom"flp><"clear">'
+ * "dom": '<"top"i>rt<"bottom"flp><"clear">'
* } );
* } );
*/
@@ -9671,38 +11808,71 @@
/**
- * DataTables features two different built-in pagination interaction methods
- * ('two_button' or 'full_numbers') which present different page controls to
- * the end user. Further methods can be added using the API (see below).
- * @type string
- * @default two_button
+ * Search delay option. This will throttle full table searches that use the
+ * DataTables provided search input element (it does not effect calls to
+ * `dt-api search()`, providing a delay before the search is made.
+ * @type integer
+ * @default 0
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.searchDelay
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sPaginationType": "full_numbers"
+ * "searchDelay": 200
* } );
* } )
*/
- "sPaginationType": "two_button",
+ "searchDelay": null,
/**
- * Enable horizontal scrolling. When a table is too wide to fit into a certain
- * layout, or you have a large number of columns in the table, you can enable
- * x-scrolling to show the table in a viewport, which can be scrolled. This
- * property can be any CSS unit, or a number (in which case it will be treated
- * as a pixel measurement).
+ * DataTables features four different built-in options for the buttons to
+ * display for pagination control:
+ *
+ * * `simple` - 'Previous' and 'Next' buttons only
+ * * 'simple_numbers` - 'Previous' and 'Next' buttons, plus page numbers
+ * * `full` - 'First', 'Previous', 'Next' and 'Last' buttons
+ * * `full_numbers` - 'First', 'Previous', 'Next' and 'Last' buttons, plus
+ * page numbers
+ *
+ * Further methods can be added using {@link DataTable.ext.oPagination}.
* @type string
- * @default blank string - i.e. disabled
- * @dtopt Features
- *
+ * @default simple_numbers
+ *
+ * @dtopt Options
+ * @name DataTable.defaults.pagingType
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sScrollX": "100%",
- * "bScrollCollapse": true
+ * "pagingType": "full_numbers"
+ * } );
+ * } )
+ */
+ "sPaginationType": "simple_numbers",
+
+
+ /**
+ * Enable horizontal scrolling. When a table is too wide to fit into a
+ * certain layout, or you have a large number of columns in the table, you
+ * can enable x-scrolling to show the table in a viewport, which can be
+ * scrolled. This property can be `true` which will allow the table to
+ * scroll horizontally when needed, or any CSS unit, or a number (in which
+ * case it will be treated as a pixel measurement). Setting as simply `true`
+ * is recommended.
+ * @type boolean|string
+ * @default blank string - i.e. disabled
+ *
+ * @dtopt Features
+ * @name DataTable.defaults.scrollX
+ *
+ * @example
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "scrollX": true,
+ * "scrollCollapse": true
* } );
* } );
*/
@@ -9718,13 +11888,15 @@
* measurement).
* @type string
* @default blank string - i.e. disabled
+ *
* @dtopt Options
- *
+ * @name DataTable.defaults.scrollXInner
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sScrollX": "100%",
- * "sScrollXInner": "110%"
+ * "scrollX": "100%",
+ * "scrollXInner": "110%"
* } );
* } );
*/
@@ -9740,13 +11912,15 @@
* (in which case it will be treated as a pixel measurement).
* @type string
* @default blank string - i.e. disabled
+ *
* @dtopt Features
- *
+ * @name DataTable.defaults.scrollY
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "sScrollY": "200px",
- * "bPaginate": false
+ * "scrollY": "200px",
+ * "paginate": false
* } );
* } );
*/
@@ -9754,60 +11928,98 @@
/**
+ * __Deprecated__ The functionality provided by this parameter has now been
+ * superseded by that provided through `ajax`, which should be used instead.
+ *
* Set the HTTP method that is used to make the Ajax call for server-side
* processing or Ajax sourced data.
* @type string
* @default GET
+ *
* @dtopt Options
* @dtopt Server-side
- *
- * @example
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "bServerSide": true,
- * "sAjaxSource": "scripts/post.php",
- * "sServerMethod": "POST"
- * } );
- * } );
+ * @name DataTable.defaults.serverMethod
+ *
+ * @deprecated 1.10. Please use `ajax` for this functionality now.
*/
- "sServerMethod": "GET"
+ "sServerMethod": "GET",
+
+
+ /**
+ * DataTables makes use of renderers when displaying HTML elements for
+ * a table. These renderers can be added or modified by plug-ins to
+ * generate suitable mark-up for a site. For example the Bootstrap
+ * integration plug-in for DataTables uses a paging button renderer to
+ * display pagination buttons in the mark-up required by Bootstrap.
+ *
+ * For further information about the renderers available see
+ * DataTable.ext.renderer
+ * @type string|object
+ * @default null
+ *
+ * @name DataTable.defaults.renderer
+ *
+ */
+ "renderer": null,
+
+
+ /**
+ * Set the data property name that DataTables should use to get a row's id
+ * to set as the `id` property in the node.
+ * @type string
+ * @default DT_RowId
+ *
+ * @name DataTable.defaults.rowId
+ */
+ "rowId": "DT_RowId"
};
+ _fnHungarianMap( DataTable.defaults );
+
+ /*
+ * Developer note - See note in model.defaults.js about the use of Hungarian
+ * notation and camel case.
+ */
+
/**
* Column options that can be given to DataTables at initialisation time.
* @namespace
*/
- DataTable.defaults.columns = {
+ DataTable.defaults.column = {
/**
- * Allows a column's sorting to take multiple columns into account when
- * doing a sort. For example first name / last name columns make sense to
- * do a multi-column sort over the two columns.
- * @type array
+ * Define which column(s) an order will occur on for this column. This
+ * allows a column's ordering to take multiple columns into account when
+ * doing a sort or use the data from a different column. For example first
+ * name / last name columns make sense to do a multi-column sort over the
+ * two columns.
+ * @type array|int
* @default null Takes the value of the column index automatically
+ *
+ * @name DataTable.defaults.column.orderData
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "aDataSort": [ 0, 1 ], "aTargets": [ 0 ] },
- * { "aDataSort": [ 1, 0 ], "aTargets": [ 1 ] },
- * { "aDataSort": [ 2, 3, 4 ], "aTargets": [ 2 ] }
+ * "columnDefs": [
+ * { "orderData": [ 0, 1 ], "targets": [ 0 ] },
+ * { "orderData": [ 1, 0 ], "targets": [ 1 ] },
+ * { "orderData": 2, "targets": [ 2 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "aDataSort": [ 0, 1 ] },
- * { "aDataSort": [ 1, 0 ] },
- * { "aDataSort": [ 2, 3, 4 ] },
+ * "columns": [
+ * { "orderData": [ 0, 1 ] },
+ * { "orderData": [ 1, 0 ] },
+ * { "orderData": 2 },
* null,
* null
* ]
@@ -9815,37 +12027,40 @@
* } );
*/
"aDataSort": null,
+ "iDataSort": -1,
/**
- * You can control the default sorting direction, and even alter the behaviour
- * of the sort handler (i.e. only allow ascending sorting etc) using this
- * parameter.
+ * You can control the default ordering direction, and even alter the
+ * behaviour of the sort handler (i.e. only allow ascending ordering etc)
+ * using this parameter.
* @type array
* @default [ 'asc', 'desc' ]
+ *
+ * @name DataTable.defaults.column.orderSequence
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "asSorting": [ "asc" ], "aTargets": [ 1 ] },
- * { "asSorting": [ "desc", "asc", "asc" ], "aTargets": [ 2 ] },
- * { "asSorting": [ "desc" ], "aTargets": [ 3 ] }
+ * "columnDefs": [
+ * { "orderSequence": [ "asc" ], "targets": [ 1 ] },
+ * { "orderSequence": [ "desc", "asc", "asc" ], "targets": [ 2 ] },
+ * { "orderSequence": [ "desc" ], "targets": [ 3 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
+ * "columns": [
* null,
- * { "asSorting": [ "asc" ] },
- * { "asSorting": [ "desc", "asc", "asc" ] },
- * { "asSorting": [ "desc" ] },
+ * { "orderSequence": [ "asc" ] },
+ * { "orderSequence": [ "desc", "asc", "asc" ] },
+ * { "orderSequence": [ "desc" ] },
* null
* ]
* } );
@@ -9858,23 +12073,25 @@
* Enable or disable filtering on the data in this column.
* @type boolean
* @default true
+ *
+ * @name DataTable.defaults.column.searchable
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "bSearchable": false, "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "searchable": false, "targets": [ 0 ] }
* ] } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "bSearchable": false },
+ * "columns": [
+ * { "searchable": false },
* null,
* null,
* null,
@@ -9886,26 +12103,28 @@
/**
- * Enable or disable sorting on this column.
+ * Enable or disable ordering on this column.
* @type boolean
* @default true
+ *
+ * @name DataTable.defaults.column.orderable
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "bSortable": false, "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "orderable": false, "targets": [ 0 ] }
* ] } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "bSortable": false },
+ * "columns": [
+ * { "orderable": false },
* null,
* null,
* null,
@@ -9916,44 +12135,29 @@
"bSortable": true,
- /**
- * Deprecated When using fnRender() for a column, you may wish
- * to use the original data (before rendering) for sorting and filtering
- * (the default is to used the rendered data that the user can see). This
- * may be useful for dates etc.
- *
- * Please note that this option has now been deprecated and will be removed
- * in the next version of DataTables. Please use mRender / mData rather than
- * fnRender.
- * @type boolean
- * @default true
- * @dtopt Columns
- * @deprecated
- */
- "bUseRendered": true,
-
-
/**
* Enable or disable the display of this column.
* @type boolean
* @default true
+ *
+ * @name DataTable.defaults.column.visible
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "bVisible": false, "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "visible": false, "targets": [ 0 ] }
* ] } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "bVisible": false },
+ * "columns": [
+ * { "visible": false },
* null,
* null,
* null,
@@ -9962,29 +12166,31 @@
* } );
*/
"bVisible": true,
-
-
+
+
/**
* Developer definable function that is called whenever a cell is created (Ajax source,
* etc) or processed for input (DOM source). This can be used as a compliment to mRender
* allowing you to modify the DOM element (add background colour for example) when the
* element is available.
* @type function
- * @param {element} nTd The TD node that has been created
- * @param {*} sData The Data for the cell
- * @param {array|object} oData The data for the whole row
- * @param {int} iRow The row index for the aoData data store
- * @param {int} iCol The column index for aoColumns
+ * @param {element} td The TD node that has been created
+ * @param {*} cellData The Data for the cell
+ * @param {array|object} rowData The data for the whole row
+ * @param {int} row The row index for the aoData data store
+ * @param {int} col The column index for aoColumns
+ *
+ * @name DataTable.defaults.column.createdCell
* @dtopt Columns
- *
+ *
* @example
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [ {
- * "aTargets": [3],
- * "fnCreatedCell": function (nTd, sData, oData, iRow, iCol) {
- * if ( sData == "1.7" ) {
- * $(nTd).css('color', 'blue')
+ * "columnDefs": [ {
+ * "targets": [3],
+ * "createdCell": function (td, cellData, rowData, row, col) {
+ * if ( cellData == "1.7" ) {
+ * $(td).css('color', 'blue')
* }
* }
* } ]
@@ -9995,132 +12201,139 @@
/**
- * Deprecated Custom display function that will be called for the
- * display of each cell in this column.
- *
- * Please note that this option has now been deprecated and will be removed
- * in the next version of DataTables. Please use mRender / mData rather than
- * fnRender.
- * @type function
- * @param {object} o Object with the following parameters:
- * @param {int} o.iDataRow The row in aoData
- * @param {int} o.iDataColumn The column in question
- * @param {array} o.aData The data for the row in question
- * @param {object} o.oSettings The settings object for this DataTables instance
- * @param {object} o.mDataProp The data property used for this column
- * @param {*} val The current cell value
- * @returns {string} The string you which to use in the display
- * @dtopt Columns
- * @deprecated
- */
- "fnRender": null,
-
-
- /**
- * The column index (starting from 0!) that you wish a sort to be performed
- * upon when this column is selected for sorting. This can be used for sorting
- * on hidden columns for example.
- * @type int
- * @default -1 Use automatically calculated column index
- * @dtopt Columns
- *
- * @example
- * // Using aoColumnDefs
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "iDataSort": 1, "aTargets": [ 0 ] }
- * ]
- * } );
- * } );
- *
- * @example
- * // Using aoColumns
- * $(document).ready( function() {
- * $('#example').dataTable( {
- * "aoColumns": [
- * { "iDataSort": 1 },
- * null,
- * null,
- * null,
- * null
- * ]
- * } );
- * } );
- */
- "iDataSort": -1,
-
-
- /**
- * This parameter has been replaced by mData in DataTables to ensure naming
- * consistency. mDataProp can still be used, as there is backwards compatibility
- * in DataTables for this option, but it is strongly recommended that you use
- * mData in preference to mDataProp.
- * @name DataTable.defaults.columns.mDataProp
+ * This parameter has been replaced by `data` in DataTables to ensure naming
+ * consistency. `dataProp` can still be used, as there is backwards
+ * compatibility in DataTables for this option, but it is strongly
+ * recommended that you use `data` in preference to `dataProp`.
+ * @name DataTable.defaults.column.dataProp
*/
/**
- * This property can be used to read data from any JSON data source property,
- * including deeply nested objects / properties. mData can be given in a
+ * This property can be used to read data from any data source property,
+ * including deeply nested objects / properties. `data` can be given in a
* number of different ways which effect its behaviour:
- *
- *
integer - treated as an array index for the data source. This is the
- * default that DataTables uses (incrementally increased for each column).
- *
string - read an object property from the data source. Note that you can
- * use Javascript dotted notation to read deep properties / arrays from the
- * data source.
- *
null - the sDefaultContent option will be used for the cell (null
- * by default, so you will need to specify the default content you want -
- * typically an empty string). This can be useful on generated columns such
- * as edit / delete action columns.
- *
function - the function given will be executed whenever DataTables
- * needs to set or get the data for a cell in the column. The function
- * takes three parameters:
- *
- *
{array|object} The data source for the row
- *
{string} The type call data requested - this will be 'set' when
- * setting data or 'filter', 'display', 'type', 'sort' or undefined when
- * gathering data. Note that when undefined is given for the type
- * DataTables expects to get the raw data for the object back
- *
{*} Data to set when the second parameter is 'set'.
- *
- * The return value from the function is not required when 'set' is the type
- * of call, but otherwise the return is what will be used for the data
- * requested.
- *
*
- * Note that prior to DataTables 1.9.2 mData was called mDataProp. The name change
- * reflects the flexibility of this property and is consistent with the naming of
- * mRender. If 'mDataProp' is given, then it will still be used by DataTables, as
- * it automatically maps the old name to the new if required.
+ * * `integer` - treated as an array index for the data source. This is the
+ * default that DataTables uses (incrementally increased for each column).
+ * * `string` - read an object property from the data source. There are
+ * three 'special' options that can be used in the string to alter how
+ * DataTables reads the data from the source object:
+ * * `.` - Dotted Javascript notation. Just as you use a `.` in
+ * Javascript to read from nested objects, so to can the options
+ * specified in `data`. For example: `browser.version` or
+ * `browser.name`. If your object parameter name contains a period, use
+ * `\\` to escape it - i.e. `first\\.name`.
+ * * `[]` - Array notation. DataTables can automatically combine data
+ * from and array source, joining the data with the characters provided
+ * between the two brackets. For example: `name[, ]` would provide a
+ * comma-space separated list from the source array. If no characters
+ * are provided between the brackets, the original array source is
+ * returned.
+ * * `()` - Function notation. Adding `()` to the end of a parameter will
+ * execute a function of the name given. For example: `browser()` for a
+ * simple function on the data source, `browser.version()` for a
+ * function in a nested property or even `browser().version` to get an
+ * object property if the function called returns an object. Note that
+ * function notation is recommended for use in `render` rather than
+ * `data` as it is much simpler to use as a renderer.
+ * * `null` - use the original data source for the row rather than plucking
+ * data directly from it. This action has effects on two other
+ * initialisation options:
+ * * `defaultContent` - When null is given as the `data` option and
+ * `defaultContent` is specified for the column, the value defined by
+ * `defaultContent` will be used for the cell.
+ * * `render` - When null is used for the `data` option and the `render`
+ * option is specified for the column, the whole data source for the
+ * row is used for the renderer.
+ * * `function` - the function given will be executed whenever DataTables
+ * needs to set or get the data for a cell in the column. The function
+ * takes three parameters:
+ * * Parameters:
+ * * `{array|object}` The data source for the row
+ * * `{string}` The type call data requested - this will be 'set' when
+ * setting data or 'filter', 'display', 'type', 'sort' or undefined
+ * when gathering data. Note that when `undefined` is given for the
+ * type DataTables expects to get the raw data for the object back<
+ * * `{*}` Data to set when the second parameter is 'set'.
+ * * Return:
+ * * The return value from the function is not required when 'set' is
+ * the type of call, but otherwise the return is what will be used
+ * for the data requested.
+ *
+ * Note that `data` is a getter and setter option. If you just require
+ * formatting of data for output, you will likely want to use `render` which
+ * is simply a getter and thus simpler to use.
+ *
+ * Note that prior to DataTables 1.9.2 `data` was called `mDataProp`. The
+ * name change reflects the flexibility of this property and is consistent
+ * with the naming of mRender. If 'mDataProp' is given, then it will still
+ * be used by DataTables, as it automatically maps the old name to the new
+ * if required.
+ *
* @type string|int|function|null
* @default null Use automatically calculated column index
+ *
+ * @name DataTable.defaults.column.data
* @dtopt Columns
- *
+ *
* @example
* // Read table data from objects
+ * // JSON structure for each row:
+ * // {
+ * // "engine": {value},
+ * // "browser": {value},
+ * // "platform": {value},
+ * // "version": {value},
+ * // "grade": {value}
+ * // }
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "sAjaxSource": "sources/deep.txt",
- * "aoColumns": [
- * { "mData": "engine" },
- * { "mData": "browser" },
- * { "mData": "platform.inner" },
- * { "mData": "platform.details.0" },
- * { "mData": "platform.details.1" }
+ * $('#example').dataTable( {
+ * "ajaxSource": "sources/objects.txt",
+ * "columns": [
+ * { "data": "engine" },
+ * { "data": "browser" },
+ * { "data": "platform" },
+ * { "data": "version" },
+ * { "data": "grade" }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using mData as a function to provide different information for
+ * // Read information from deeply nested objects
+ * // JSON structure for each row:
+ * // {
+ * // "engine": {value},
+ * // "browser": {value},
+ * // "platform": {
+ * // "inner": {value}
+ * // },
+ * // "details": [
+ * // {value}, {value}
+ * // ]
+ * // }
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "ajaxSource": "sources/deep.txt",
+ * "columns": [
+ * { "data": "engine" },
+ * { "data": "browser" },
+ * { "data": "platform.inner" },
+ * { "data": "platform.details.0" },
+ * { "data": "platform.details.1" }
+ * ]
+ * } );
+ * } );
+ *
+ * @example
+ * // Using `data` as a function to provide different information for
* // sorting, filtering and display. In this case, currency (price)
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "aoColumnDefs": [ {
- * "aTargets": [ 0 ],
- * "mData": function ( source, type, val ) {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": function ( source, type, val ) {
* if (type === 'set') {
* source.price = val;
* // Store the computed dislay and filter values for efficiency
@@ -10140,73 +12353,150 @@
* } ]
* } );
* } );
+ *
+ * @example
+ * // Using default content
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": null,
+ * "defaultContent": "Click to edit"
+ * } ]
+ * } );
+ * } );
+ *
+ * @example
+ * // Using array notation - outputting a list from an array
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": "name[, ]"
+ * } ]
+ * } );
+ * } );
+ *
*/
"mData": null,
/**
- * This property is the rendering partner to mData and it is suggested that
- * when you want to manipulate data for display (including filtering, sorting etc)
- * but not altering the underlying data for the table, use this property. mData
- * can actually do everything this property can and more, but this parameter is
- * easier to use since there is no 'set' option. Like mData is can be given
- * in a number of different ways to effect its behaviour, with the addition of
- * supporting array syntax for easy outputting of arrays (including arrays of
- * objects):
- *
- *
integer - treated as an array index for the data source. This is the
- * default that DataTables uses (incrementally increased for each column).
- *
string - read an object property from the data source. Note that you can
- * use Javascript dotted notation to read deep properties / arrays from the
- * data source and also array brackets to indicate that the data reader should
- * loop over the data source array. When characters are given between the array
- * brackets, these characters are used to join the data source array together.
- * For example: "accounts[, ].name" would result in a comma separated list with
- * the 'name' value from the 'accounts' array of objects.
- *
function - the function given will be executed whenever DataTables
- * needs to set or get the data for a cell in the column. The function
- * takes three parameters:
- *
- *
{array|object} The data source for the row (based on mData)
- *
{string} The type call data requested - this will be 'filter', 'display',
- * 'type' or 'sort'.
- *
{array|object} The full data source for the row (not based on mData)
- *
- * The return value from the function is what will be used for the data
- * requested.
- *
- * @type string|int|function|null
- * @default null Use mData
+ * This property is the rendering partner to `data` and it is suggested that
+ * when you want to manipulate data for display (including filtering,
+ * sorting etc) without altering the underlying data for the table, use this
+ * property. `render` can be considered to be the the read only companion to
+ * `data` which is read / write (then as such more complex). Like `data`
+ * this option can be given in a number of different ways to effect its
+ * behaviour:
+ *
+ * * `integer` - treated as an array index for the data source. This is the
+ * default that DataTables uses (incrementally increased for each column).
+ * * `string` - read an object property from the data source. There are
+ * three 'special' options that can be used in the string to alter how
+ * DataTables reads the data from the source object:
+ * * `.` - Dotted Javascript notation. Just as you use a `.` in
+ * Javascript to read from nested objects, so to can the options
+ * specified in `data`. For example: `browser.version` or
+ * `browser.name`. If your object parameter name contains a period, use
+ * `\\` to escape it - i.e. `first\\.name`.
+ * * `[]` - Array notation. DataTables can automatically combine data
+ * from and array source, joining the data with the characters provided
+ * between the two brackets. For example: `name[, ]` would provide a
+ * comma-space separated list from the source array. If no characters
+ * are provided between the brackets, the original array source is
+ * returned.
+ * * `()` - Function notation. Adding `()` to the end of a parameter will
+ * execute a function of the name given. For example: `browser()` for a
+ * simple function on the data source, `browser.version()` for a
+ * function in a nested property or even `browser().version` to get an
+ * object property if the function called returns an object.
+ * * `object` - use different data for the different data types requested by
+ * DataTables ('filter', 'display', 'type' or 'sort'). The property names
+ * of the object is the data type the property refers to and the value can
+ * defined using an integer, string or function using the same rules as
+ * `render` normally does. Note that an `_` option _must_ be specified.
+ * This is the default value to use if you haven't specified a value for
+ * the data type requested by DataTables.
+ * * `function` - the function given will be executed whenever DataTables
+ * needs to set or get the data for a cell in the column. The function
+ * takes three parameters:
+ * * Parameters:
+ * * {array|object} The data source for the row (based on `data`)
+ * * {string} The type call data requested - this will be 'filter',
+ * 'display', 'type' or 'sort'.
+ * * {array|object} The full data source for the row (not based on
+ * `data`)
+ * * Return:
+ * * The return value from the function is what will be used for the
+ * data requested.
+ *
+ * @type string|int|function|object|null
+ * @default null Use the data source value.
+ *
+ * @name DataTable.defaults.column.render
* @dtopt Columns
- *
+ *
* @example
* // Create a comma separated list from an array of objects
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "sAjaxSource": "sources/deep.txt",
- * "aoColumns": [
- * { "mData": "engine" },
- * { "mData": "browser" },
+ * $('#example').dataTable( {
+ * "ajaxSource": "sources/deep.txt",
+ * "columns": [
+ * { "data": "engine" },
+ * { "data": "browser" },
* {
- * "mData": "platform",
- * "mRender": "[, ].name"
+ * "data": "platform",
+ * "render": "[, ].name"
* }
* ]
* } );
* } );
- *
+ *
+ * @example
+ * // Execute a function to obtain data
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": null, // Use the full data source object for the renderer's source
+ * "render": "browserName()"
+ * } ]
+ * } );
+ * } );
+ *
+ * @example
+ * // As an object, extracting different data for the different types
+ * // This would be used with a data source such as:
+ * // { "phone": 5552368, "phone_filter": "5552368 555-2368", "phone_display": "555-2368" }
+ * // Here the `phone` integer is used for sorting and type detection, while `phone_filter`
+ * // (which has both forms) is used for filtering for if a user inputs either format, while
+ * // the formatted phone number is the one that is shown in the table.
+ * $(document).ready( function() {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": null, // Use the full data source object for the renderer's source
+ * "render": {
+ * "_": "phone",
+ * "filter": "phone_filter",
+ * "display": "phone_display"
+ * }
+ * } ]
+ * } );
+ * } );
+ *
* @example
* // Use as a function to create a link from the data source
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "aoColumnDefs": [
- * {
- * "aTargets": [ 0 ],
- * "mData": "download_link",
- * "mRender": function ( data, type, full ) {
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "data": "download_link",
+ * "render": function ( data, type, full ) {
* return 'Download';
* }
- * ]
+ * } ]
* } );
* } );
*/
@@ -10219,15 +12509,17 @@
* to act as a header for a row (you may wish to add scope='row' to the TH elements).
* @type string
* @default td
+ *
+ * @name DataTable.defaults.column.cellType
* @dtopt Columns
- *
+ *
* @example
* // Make the first column use TH cells
* $(document).ready( function() {
- * var oTable = $('#example').dataTable( {
- * "aoColumnDefs": [ {
- * "aTargets": [ 0 ],
- * "sCellType": "th"
+ * $('#example').dataTable( {
+ * "columnDefs": [ {
+ * "targets": [ 0 ],
+ * "cellType": "th"
* } ]
* } );
* } );
@@ -10239,24 +12531,26 @@
* Class to give to each cell in this column.
* @type string
* @default Empty string
+ *
+ * @name DataTable.defaults.column.class
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sClass": "my_class", "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "class": "my_class", "targets": [ 0 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "sClass": "my_class" },
+ * "columns": [
+ * { "class": "my_class" },
* null,
* null,
* null,
@@ -10266,32 +12560,33 @@
* } );
*/
"sClass": "",
-
+
/**
* When DataTables calculates the column widths to assign to each column,
* it finds the longest string in each column and then constructs a
* temporary table and reads the widths from that. The problem with this
- * is that "mmm" is much wider then "iiii", but the latter is a longer
+ * is that "mmm" is much wider then "iiii", but the latter is a longer
* string - thus the calculation can go wrong (doing it properly and putting
* it into an DOM object and measuring that is horribly(!) slow). Thus as
* a "work around" we provide this option. It will append its value to the
* text that is found to be the longest string for the column - i.e. padding.
- * Generally you shouldn't need this, and it is not documented on the
- * general DataTables.net documentation
+ * Generally you shouldn't need this!
* @type string
* @default Empty string
+ *
+ * @name DataTable.defaults.column.contentPadding
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
+ * "columns": [
* null,
* null,
* null,
* {
- * "sContentPadding": "mmm"
+ * "contentPadding": "mmm"
* }
* ]
* } );
@@ -10302,37 +12597,39 @@
/**
* Allows a default value to be given for a column's data, and will be used
- * whenever a null data source is encountered (this can be because mData
+ * whenever a null data source is encountered (this can be because `data`
* is set to null, or because the data source itself is null).
* @type string
* @default null
+ *
+ * @name DataTable.defaults.column.defaultContent
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
+ * "columnDefs": [
* {
- * "mData": null,
- * "sDefaultContent": "Edit",
- * "aTargets": [ -1 ]
+ * "data": null,
+ * "defaultContent": "Edit",
+ * "targets": [ -1 ]
* }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
+ * "columns": [
* null,
* null,
* null,
* {
- * "mData": null,
- * "sDefaultContent": "Edit"
+ * "data": null,
+ * "defaultContent": "Edit"
* }
* ]
* } );
@@ -10350,32 +12647,34 @@
* client-side, your server-side code does not also need updating).
* @type string
* @default Empty string
+ *
+ * @name DataTable.defaults.column.name
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sName": "engine", "aTargets": [ 0 ] },
- * { "sName": "browser", "aTargets": [ 1 ] },
- * { "sName": "platform", "aTargets": [ 2 ] },
- * { "sName": "version", "aTargets": [ 3 ] },
- * { "sName": "grade", "aTargets": [ 4 ] }
+ * "columnDefs": [
+ * { "name": "engine", "targets": [ 0 ] },
+ * { "name": "browser", "targets": [ 1 ] },
+ * { "name": "platform", "targets": [ 2 ] },
+ * { "name": "version", "targets": [ 3 ] },
+ * { "name": "grade", "targets": [ 4 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "sName": "engine" },
- * { "sName": "browser" },
- * { "sName": "platform" },
- * { "sName": "version" },
- * { "sName": "grade" }
+ * "columns": [
+ * { "name": "engine" },
+ * { "name": "browser" },
+ * { "name": "platform" },
+ * { "name": "version" },
+ * { "name": "grade" }
* ]
* } );
* } );
@@ -10384,38 +12683,40 @@
/**
- * Defines a data source type for the sorting which can be used to read
+ * Defines a data source type for the ordering which can be used to read
* real-time information from the table (updating the internally cached
- * version) prior to sorting. This allows sorting to occur on user editable
- * elements such as form inputs.
+ * version) prior to ordering. This allows ordering to occur on user
+ * editable elements such as form inputs.
* @type string
* @default std
+ *
+ * @name DataTable.defaults.column.orderDataType
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sSortDataType": "dom-text", "aTargets": [ 2, 3 ] },
- * { "sType": "numeric", "aTargets": [ 3 ] },
- * { "sSortDataType": "dom-select", "aTargets": [ 4 ] },
- * { "sSortDataType": "dom-checkbox", "aTargets": [ 5 ] }
+ * "columnDefs": [
+ * { "orderDataType": "dom-text", "targets": [ 2, 3 ] },
+ * { "type": "numeric", "targets": [ 3 ] },
+ * { "orderDataType": "dom-select", "targets": [ 4 ] },
+ * { "orderDataType": "dom-checkbox", "targets": [ 5 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
+ * "columns": [
* null,
* null,
- * { "sSortDataType": "dom-text" },
- * { "sSortDataType": "dom-text", "sType": "numeric" },
- * { "sSortDataType": "dom-select" },
- * { "sSortDataType": "dom-checkbox" }
+ * { "orderDataType": "dom-text" },
+ * { "orderDataType": "dom-text", "type": "numeric" },
+ * { "orderDataType": "dom-select" },
+ * { "orderDataType": "dom-checkbox" }
* ]
* } );
* } );
@@ -10426,26 +12727,28 @@
/**
* The title of this column.
* @type string
- * @default null Derived from the 'TH' value for this column in the
+ * @default null Derived from the 'TH' value for this column in the
* original HTML table.
+ *
+ * @name DataTable.defaults.column.title
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sTitle": "My column title", "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "title": "My column title", "targets": [ 0 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "sTitle": "My column title" },
+ * "columns": [
+ * { "title": "My column title" },
* null,
* null,
* null,
@@ -10458,33 +12761,35 @@
/**
- * The type allows you to specify how the data for this column will be sorted.
- * Four types (string, numeric, date and html (which will strip HTML tags
- * before sorting)) are currently available. Note that only date formats
- * understood by Javascript's Date() object will be accepted as type date. For
- * example: "Mar 26, 2008 5:03 PM". May take the values: 'string', 'numeric',
- * 'date' or 'html' (by default). Further types can be adding through
- * plug-ins.
+ * The type allows you to specify how the data for this column will be
+ * ordered. Four types (string, numeric, date and html (which will strip
+ * HTML tags before ordering)) are currently available. Note that only date
+ * formats understood by Javascript's Date() object will be accepted as type
+ * date. For example: "Mar 26, 2008 5:03 PM". May take the values: 'string',
+ * 'numeric', 'date' or 'html' (by default). Further types can be adding
+ * through plug-ins.
* @type string
* @default null Auto-detected from raw data
+ *
+ * @name DataTable.defaults.column.type
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sType": "html", "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "type": "html", "targets": [ 0 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "sType": "html" },
+ * "columns": [
+ * { "type": "html" },
* null,
* null,
* null,
@@ -10498,29 +12803,31 @@
/**
* Defining the width of the column, this parameter may take any CSS value
- * (3em, 20px etc). DataTables apples 'smart' widths to columns which have not
+ * (3em, 20px etc). DataTables applies 'smart' widths to columns which have not
* been given a specific width through this interface ensuring that the table
* remains readable.
* @type string
* @default null Automatic
+ *
+ * @name DataTable.defaults.column.width
* @dtopt Columns
- *
+ *
* @example
- * // Using aoColumnDefs
+ * // Using `columnDefs`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumnDefs": [
- * { "sWidth": "20%", "aTargets": [ 0 ] }
+ * "columnDefs": [
+ * { "width": "20%", "targets": [ 0 ] }
* ]
* } );
* } );
- *
+ *
* @example
- * // Using aoColumns
+ * // Using `columns`
* $(document).ready( function() {
* $('#example').dataTable( {
- * "aoColumns": [
- * { "sWidth": "20%" },
+ * "columns": [
+ * { "width": "20%" },
* null,
* null,
* null,
@@ -10532,6 +12839,8 @@
"sWidth": null
};
+ _fnHungarianMap( DataTable.defaults.column );
+
/**
@@ -10539,11 +12848,11 @@
* given table, including configuration, data and current application of the
* table options. DataTables does not have a single instance for each DataTable
* with the settings attached to that instance, but rather instances of the
- * DataTable "class" are created on-the-fly as needed (typically by a
+ * DataTable "class" are created on-the-fly as needed (typically by a
* $().dataTable() call) and the settings object is then applied to that
* instance.
- *
- * Note that this object is related to {@link DataTable.defaults} but this
+ *
+ * Note that this object is related to {@link DataTable.defaults} but this
* one is the internal data store for DataTables's cache of columns. It should
* NOT be manipulated outside of DataTables. Any configuration should be done
* through the initialisation options.
@@ -10551,7 +12860,7 @@
* @todo Really should attach the settings object to individual instances so we
* don't need to create new instances on each $().dataTable() call (if the
* table already exists). It would also save passing oSettings around and
- * into every single function. However, this is a very significant
+ * into every single function. However, this is a very significant
* architecture change for DataTables and will almost certainly break
* backwards compatibility with older installations. This is something that
* will be done in 2.0.
@@ -10562,7 +12871,7 @@
* @namespace
*/
"oFeatures": {
-
+
/**
* Flag to say if DataTables should automatically try to calculate the
* optimum table and columns widths (true) or not (false).
@@ -10582,7 +12891,7 @@
* @type boolean
*/
"bDeferRender": null,
-
+
/**
* Enable filtering on the table or not. Note that if this is disabled
* then there is no filtering at all on the table, including fnFilter.
@@ -10592,7 +12901,7 @@
* @type boolean
*/
"bFilter": null,
-
+
/**
* Table information element (the 'Showing x of y records' div) enable
* flag.
@@ -10601,7 +12910,7 @@
* @type boolean
*/
"bInfo": null,
-
+
/**
* Present a user control allowing the end user to change the page size
* when pagination is enabled.
@@ -10619,7 +12928,7 @@
* @type boolean
*/
"bPaginate": null,
-
+
/**
* Processing indicator enable flag whenever DataTables is enacting a
* user request - typically an Ajax request for server-side processing.
@@ -10628,7 +12937,7 @@
* @type boolean
*/
"bProcessing": null,
-
+
/**
* Server-side processing enabled flag - when enabled DataTables will
* get all data from the server for every draw - there is no filtering,
@@ -10638,7 +12947,7 @@
* @type boolean
*/
"bServerSide": null,
-
+
/**
* Sorting enablement flag.
* Note that this parameter will be set by the initialisation routine. To
@@ -10646,7 +12955,15 @@
* @type boolean
*/
"bSort": null,
-
+
+ /**
+ * Multi-column sorting
+ * Note that this parameter will be set by the initialisation routine. To
+ * set a default use {@link DataTable.defaults}.
+ * @type boolean
+ */
+ "bSortMulti": null,
+
/**
* Apply a class to the columns which are being sorted to provide a
* visual highlight or not. This can slow things down when enabled since
@@ -10656,7 +12973,7 @@
* @type boolean
*/
"bSortClasses": null,
-
+
/**
* State saving enablement flag.
* Note that this parameter will be set by the initialisation routine. To
@@ -10665,23 +12982,13 @@
*/
"bStateSave": null
},
-
+
/**
* Scrolling settings for a table.
* @namespace
*/
"oScroll": {
- /**
- * Indicate if DataTables should be allowed to set the padding / margin
- * etc for the scrolling header elements or not. Typically you will want
- * this.
- * Note that this parameter will be set by the initialisation routine. To
- * set a default use {@link DataTable.defaults}.
- * @type boolean
- */
- "bAutoCss": null,
-
/**
* When the table is shorter in height than sScrollY, collapse the
* table container down to the height of the table (when true).
@@ -10690,16 +12997,7 @@
* @type boolean
*/
"bCollapse": null,
-
- /**
- * Infinite scrolling enablement flag. Now deprecated in favour of
- * using the Scroller plug-in.
- * Note that this parameter will be set by the initialisation routine. To
- * set a default use {@link DataTable.defaults}.
- * @type boolean
- */
- "bInfinite": null,
-
+
/**
* Width of the scrollbar for the web-browser's platform. Calculated
* during table initialisation.
@@ -10707,26 +13005,16 @@
* @default 0
*/
"iBarWidth": 0,
-
+
/**
- * Space (in pixels) between the bottom of the scrolling container and
- * the bottom of the scrolling viewport before the next page is loaded
- * when using infinite scrolling.
- * Note that this parameter will be set by the initialisation routine. To
- * set a default use {@link DataTable.defaults}.
- * @type int
- */
- "iLoadGap": null,
-
- /**
- * Viewport width for horizontal scrolling. Horizontal scrolling is
+ * Viewport width for horizontal scrolling. Horizontal scrolling is
* disabled if an empty string.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
* @type string
*/
"sX": null,
-
+
/**
* Width to expand the table to when using x-scrolling. Typically you
* should not need to use this.
@@ -10736,7 +13024,7 @@
* @deprecated
*/
"sXInner": null,
-
+
/**
* Viewport height for vertical scrolling. Vertical scrolling is disabled
* if an empty string.
@@ -10746,7 +13034,7 @@
*/
"sY": null
},
-
+
/**
* Language information for the table.
* @namespace
@@ -10754,14 +13042,14 @@
*/
"oLanguage": {
/**
- * Information callback function. See
+ * Information callback function. See
* {@link DataTable.defaults.fnInfoCallback}
* @type function
* @default null
*/
"fnInfoCallback": null
},
-
+
/**
* Browser support parameters
* @namespace
@@ -10773,11 +13061,38 @@
* @type boolean
* @default false
*/
- "bScrollOversize": false
+ "bScrollOversize": false,
+
+ /**
+ * Determine if the vertical scrollbar is on the right or left of the
+ * scrolling container - needed for rtl language layout, although not
+ * all browsers move the scrollbar (Safari).
+ * @type boolean
+ * @default false
+ */
+ "bScrollbarLeft": false,
+
+ /**
+ * Flag for if `getBoundingClientRect` is fully supported or not
+ * @type boolean
+ * @default false
+ */
+ "bBounding": false,
+
+ /**
+ * Browser scrollbar width
+ * @type integer
+ * @default 0
+ */
+ "barWidth": 0
},
-
+
+
+ "ajax": null,
+
+
/**
- * Array referencing the nodes which are used for the features. The
+ * Array referencing the nodes which are used for the features. The
* parameters of this object match what is allowed by sDom - i.e.
*
*
'l' - Length changing
@@ -10791,7 +13106,7 @@
* @default []
*/
"aanFeatures": [],
-
+
/**
* Store data information - see {@link DataTable.models.oRow} for detailed
* information.
@@ -10799,51 +13114,51 @@
* @default []
*/
"aoData": [],
-
+
/**
* Array of indexes which are in the current display (after filtering etc)
* @type array
* @default []
*/
"aiDisplay": [],
-
+
/**
* Array of indexes for display - no filtering
* @type array
* @default []
*/
"aiDisplayMaster": [],
-
+
+ /**
+ * Map of row ids to data indexes
+ * @type object
+ * @default {}
+ */
+ "aIds": {},
+
/**
* Store information about each column that is in use
* @type array
* @default []
*/
"aoColumns": [],
-
+
/**
* Store information about the table's header
* @type array
* @default []
*/
"aoHeader": [],
-
+
/**
* Store information about the table's footer
* @type array
* @default []
*/
"aoFooter": [],
-
+
/**
- * Search data array for regular expression searching
- * @type array
- * @default []
- */
- "asDataSearch": [],
-
- /**
- * Store the applied global search information in case we want to force a
+ * Store the applied global search information in case we want to force a
* research or compare the old search to a new one.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
@@ -10851,23 +13166,22 @@
* @extends DataTable.models.oSearch
*/
"oPreviousSearch": {},
-
+
/**
- * Store the applied search for each column - see
+ * Store the applied search for each column - see
* {@link DataTable.models.oSearch} for the format that is used for the
* filtering information for each column.
* @type array
* @default []
*/
"aoPreSearchCols": [],
-
+
/**
* Sorting that is applied to the table. Note that the inner arrays are
* used in the following manner:
*
*
Index 0 - column number
*
Index 1 - current sorting direction
- *
Index 2 - index of asSorting for this column
*
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
@@ -10875,17 +13189,17 @@
* @todo These inner arrays should really be objects
*/
"aaSorting": null,
-
+
/**
* Sorting that is always applied to the table (i.e. prefixed in front of
* aaSorting).
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
- * @type array|null
- * @default null
+ * @type array
+ * @default []
*/
- "aaSortingFixed": null,
-
+ "aaSortingFixed": [],
+
/**
* Classes to use for the striping of a table.
* Note that this parameter will be set by the initialisation routine. To
@@ -10894,64 +13208,64 @@
* @default []
*/
"asStripeClasses": null,
-
+
/**
* If restoring a table - we should restore its striping classes as well
* @type array
* @default []
*/
"asDestroyStripes": [],
-
+
/**
- * If restoring a table - we should restore its width
+ * If restoring a table - we should restore its width
* @type int
* @default 0
*/
"sDestroyWidth": 0,
-
+
/**
* Callback functions array for every time a row is inserted (i.e. on a draw).
* @type array
* @default []
*/
"aoRowCallback": [],
-
+
/**
* Callback functions for the header on each draw.
* @type array
* @default []
*/
"aoHeaderCallback": [],
-
+
/**
* Callback function for the footer on each draw.
* @type array
* @default []
*/
"aoFooterCallback": [],
-
+
/**
* Array of callback functions for draw callback functions
* @type array
* @default []
*/
"aoDrawCallback": [],
-
+
/**
* Array of callback functions for row created function
* @type array
* @default []
*/
"aoRowCreatedCallback": [],
-
+
/**
- * Callback functions for just before the table is redrawn. A return of
+ * Callback functions for just before the table is redrawn. A return of
* false will be used to cancel the draw.
* @type array
* @default []
*/
"aoPreDrawCallback": [],
-
+
/**
* Callback functions for when the table has been initialised.
* @type array
@@ -10959,7 +13273,7 @@
*/
"aoInitComplete": [],
-
+
/**
* Callbacks for modifying the settings to be stored for state saving, prior to
* saving state.
@@ -10967,7 +13281,7 @@
* @default []
*/
"aoStateSaveParams": [],
-
+
/**
* Callbacks for modifying the settings that have been stored for state saving
* prior to using the stored values to restore the state.
@@ -10975,7 +13289,7 @@
* @default []
*/
"aoStateLoadParams": [],
-
+
/**
* Callbacks for operating on the settings object once the saved state has been
* loaded
@@ -10983,51 +13297,51 @@
* @default []
*/
"aoStateLoaded": [],
-
+
/**
* Cache the table ID for quick access
* @type string
* @default Empty string
*/
"sTableId": "",
-
+
/**
* The TABLE node for the main table
* @type node
* @default null
*/
"nTable": null,
-
+
/**
* Permanent ref to the thead element
* @type node
* @default null
*/
"nTHead": null,
-
+
/**
* Permanent ref to the tfoot element - if it exists
* @type node
* @default null
*/
"nTFoot": null,
-
+
/**
* Permanent ref to the tbody element
* @type node
* @default null
*/
"nTBody": null,
-
+
/**
* Cache the wrapper node (contains all DataTables controlled elements)
* @type node
* @default null
*/
"nTableWrapper": null,
-
+
/**
- * Indicate if when using server-side processing the loading of data
+ * Indicate if when using server-side processing the loading of data
* should be deferred until the second draw.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
@@ -11035,14 +13349,14 @@
* @default false
*/
"bDeferLoading": false,
-
+
/**
* Indicate if all required information has been read in
* @type boolean
* @default false
*/
"bInitialised": false,
-
+
/**
* Information about open rows. Each object in the array has the parameters
* 'nTr' and 'nParent'
@@ -11050,7 +13364,7 @@
* @default []
*/
"aoOpenRows": [],
-
+
/**
* Dictate the positioning of DataTables' control elements - see
* {@link DataTable.model.oInit.sDom}.
@@ -11060,50 +13374,39 @@
* @default null
*/
"sDom": null,
-
+
+ /**
+ * Search delay (in mS)
+ * @type integer
+ * @default null
+ */
+ "searchDelay": null,
+
/**
* Which type of pagination should be used.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
- * @type string
+ * @type string
* @default two_button
*/
"sPaginationType": "two_button",
-
+
/**
- * The cookie duration (for bStateSave) in seconds.
+ * The state duration (for `stateSave`) in seconds.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
* @type int
* @default 0
*/
- "iCookieDuration": 0,
-
+ "iStateDuration": 0,
+
/**
- * The cookie name prefix.
- * Note that this parameter will be set by the initialisation routine. To
- * set a default use {@link DataTable.defaults}.
- * @type string
- * @default Empty string
- */
- "sCookiePrefix": "",
-
- /**
- * Callback function for cookie creation.
- * Note that this parameter will be set by the initialisation routine. To
- * set a default use {@link DataTable.defaults}.
- * @type function
- * @default null
- */
- "fnCookieCallback": null,
-
- /**
- * Array of callback functions for state saving. Each array element is an
+ * Array of callback functions for state saving. Each array element is an
* object with the following parameters:
*
*
function:fn - function to call. Takes two parameters, oSettings
* and the JSON string to save that has been thus far created. Returns
- * a JSON string to be inserted into a json object
+ * a JSON string to be inserted into a json object
* (i.e. '"param": [ 0, 1, 2]')
*
string:sName - name of callback
*
@@ -11111,12 +13414,12 @@
* @default []
*/
"aoStateSave": [],
-
+
/**
- * Array of callback functions for state loading. Each array element is an
+ * Array of callback functions for state loading. Each array element is an
* object with the following parameters:
*
- *
function:fn - function to call. Takes two parameters, oSettings
+ *
function:fn - function to call. Takes two parameters, oSettings
* and the object stored. May return false to cancel state loading
*
string:sName - name of callback
*
@@ -11124,14 +13427,21 @@
* @default []
*/
"aoStateLoad": [],
-
+
/**
- * State that was loaded from the cookie. Useful for back reference
+ * State that was saved. Useful for back reference
+ * @type object
+ * @default null
+ */
+ "oSavedState": null,
+
+ /**
+ * State that was loaded. Useful for back reference
* @type object
* @default null
*/
"oLoadedState": null,
-
+
/**
* Source url for AJAX data for the table.
* Note that this parameter will be set by the initialisation routine. To
@@ -11140,33 +13450,47 @@
* @default null
*/
"sAjaxSource": null,
-
+
/**
* Property from a given object from which to read the table data from. This
- * can be an empty string (when not server-side processing), in which case
+ * can be an empty string (when not server-side processing), in which case
* it is assumed an an array is given directly.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
* @type string
*/
"sAjaxDataProp": null,
-
+
/**
* Note if draw should be blocked while getting data
* @type boolean
* @default true
*/
"bAjaxDataGet": true,
-
+
/**
- * The last jQuery XHR object that was used for server-side data gathering.
- * This can be used for working with the XHR information in one of the
+ * The last jQuery XHR object that was used for server-side data gathering.
+ * This can be used for working with the XHR information in one of the
* callbacks
* @type object
* @default null
*/
"jqXHR": null,
-
+
+ /**
+ * JSON returned from the server in the last Ajax request
+ * @type object
+ * @default undefined
+ */
+ "json": undefined,
+
+ /**
+ * Data submitted as part of the last Ajax request
+ * @type object
+ * @default undefined
+ */
+ "oAjaxData": undefined,
+
/**
* Function to get the server-side data.
* Note that this parameter will be set by the initialisation routine. To
@@ -11174,24 +13498,24 @@
* @type function
*/
"fnServerData": null,
-
+
/**
- * Functions which are called prior to sending an Ajax request so extra
+ * Functions which are called prior to sending an Ajax request so extra
* parameters can easily be sent to the server
* @type array
* @default []
*/
"aoServerParams": [],
-
+
/**
- * Send the XHR HTTP method - GET or POST (could be PUT or DELETE if
+ * Send the XHR HTTP method - GET or POST (could be PUT or DELETE if
* required).
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
* @type string
*/
"sServerMethod": null,
-
+
/**
* Format numbers for display.
* Note that this parameter will be set by the initialisation routine. To
@@ -11199,7 +13523,7 @@
* @type function
*/
"fnFormatNumber": null,
-
+
/**
* List of options that can be used for the user selectable length menu.
* Note that this parameter will be set by the initialisation routine. To
@@ -11208,7 +13532,7 @@
* @default []
*/
"aLengthMenu": null,
-
+
/**
* Counter for the draws that the table does. Also used as a tracker for
* server-side processing
@@ -11216,21 +13540,21 @@
* @default 0
*/
"iDraw": 0,
-
+
/**
* Indicate if a redraw is being done - useful for Ajax
* @type boolean
* @default false
*/
"bDrawing": false,
-
+
/**
* Draw index (iDraw) of the last error when parsing the returned data
* @type int
* @default -1
*/
"iDrawError": -1,
-
+
/**
* Paging display length
* @type int
@@ -11245,15 +13569,6 @@
*/
"_iDisplayStart": 0,
- /**
- * Paging end point - aiDisplay index. Use fnDisplayEnd rather than
- * this property to get the end point
- * @type int
- * @default 10
- * @private
- */
- "_iDisplayEnd": 10,
-
/**
* Server-side processing - number of records in the result set
* (i.e. before filtering), Use fnRecordsTotal rather than
@@ -11275,7 +13590,7 @@
* @private
*/
"_iRecordsDisplay": 0,
-
+
/**
* Flag to indicate if jQuery UI marking and classes should be used.
* Note that this parameter will be set by the initialisation routine. To
@@ -11283,16 +13598,16 @@
* @type boolean
*/
"bJUI": null,
-
+
/**
* The classes to use for the table
* @type object
* @default {}
*/
"oClasses": {},
-
+
/**
- * Flag attached to the settings object so you can check in the draw
+ * Flag attached to the settings object so you can check in the draw
* callback if filtering has been done in the draw. Deprecated in favour of
* events.
* @type boolean
@@ -11300,9 +13615,9 @@
* @deprecated
*/
"bFiltered": false,
-
+
/**
- * Flag attached to the settings object so you can check in the draw
+ * Flag attached to the settings object so you can check in the draw
* callback if sorting has been done in the draw. Deprecated in favour of
* events.
* @type boolean
@@ -11310,24 +13625,24 @@
* @deprecated
*/
"bSorted": false,
-
+
/**
- * Indicate that if multiple rows are in the header and there is more than
- * one unique cell per column, if the top one (true) or bottom one (false)
+ * Indicate that if multiple rows are in the header and there is more than
+ * one unique cell per column, if the top one (true) or bottom one (false)
* should be used for sorting / title by DataTables.
* Note that this parameter will be set by the initialisation routine. To
* set a default use {@link DataTable.defaults}.
* @type boolean
*/
"bSortCellsTop": null,
-
+
/**
* Initialisation object that is used for the table
* @type object
* @default null
*/
"oInit": null,
-
+
/**
* Destroy callback functions - for plug-ins to attach themselves to the
* destroy so they can clean up markup and events.
@@ -11336,59 +13651,62 @@
*/
"aoDestroyCallback": [],
-
+
/**
* Get the number of records in the current record set, before filtering
* @type function
*/
"fnRecordsTotal": function ()
{
- if ( this.oFeatures.bServerSide ) {
- return parseInt(this._iRecordsTotal, 10);
- } else {
- return this.aiDisplayMaster.length;
- }
+ return _fnDataSource( this ) == 'ssp' ?
+ this._iRecordsTotal * 1 :
+ this.aiDisplayMaster.length;
},
-
+
/**
* Get the number of records in the current record set, after filtering
* @type function
*/
"fnRecordsDisplay": function ()
{
- if ( this.oFeatures.bServerSide ) {
- return parseInt(this._iRecordsDisplay, 10);
- } else {
- return this.aiDisplay.length;
- }
+ return _fnDataSource( this ) == 'ssp' ?
+ this._iRecordsDisplay * 1 :
+ this.aiDisplay.length;
},
-
+
/**
- * Set the display end point - aiDisplay index
+ * Get the display end point - aiDisplay index
* @type function
- * @todo Should do away with _iDisplayEnd and calculate it on-the-fly here
*/
"fnDisplayEnd": function ()
{
- if ( this.oFeatures.bServerSide ) {
- if ( this.oFeatures.bPaginate === false || this._iDisplayLength == -1 ) {
- return this._iDisplayStart+this.aiDisplay.length;
- } else {
- return Math.min( this._iDisplayStart+this._iDisplayLength,
- this._iRecordsDisplay );
- }
- } else {
- return this._iDisplayEnd;
+ var
+ len = this._iDisplayLength,
+ start = this._iDisplayStart,
+ calc = start + len,
+ records = this.aiDisplay.length,
+ features = this.oFeatures,
+ paginate = features.bPaginate;
+
+ if ( features.bServerSide ) {
+ return paginate === false || len === -1 ?
+ start + records :
+ Math.min( start+len, this._iRecordsDisplay );
+ }
+ else {
+ return ! paginate || calc>records || len===-1 ?
+ records :
+ calc;
}
},
-
+
/**
* The DataTables object for this table
* @type object
* @default null
*/
"oInstance": null,
-
+
/**
* Unique identifier for each instance of the DataTables object. If there
* is an ID on the table node, then it takes that value, otherwise an
@@ -11412,47 +13730,604 @@
/**
* DIV container for the footer scrolling table if scrolling
*/
- "nScrollFoot": null
+ "nScrollFoot": null,
+
+ /**
+ * Last applied sort
+ * @type array
+ * @default []
+ */
+ "aLastSort": [],
+
+ /**
+ * Stored plug-in instances
+ * @type object
+ * @default {}
+ */
+ "oPlugins": {},
+
+ /**
+ * Function used to get a row's id from the row's data
+ * @type function
+ * @default null
+ */
+ "rowIdFn": null,
+
+ /**
+ * Data location where to store a row's id
+ * @type string
+ * @default null
+ */
+ "rowId": null
};
/**
- * Extension object for DataTables that is used to provide all extension options.
- *
- * Note that the DataTable.ext object is available through
- * jQuery.fn.dataTable.ext where it may be accessed and manipulated. It is
- * also aliased to jQuery.fn.dataTableExt for historic reasons.
+ * Extension object for DataTables that is used to provide all extension
+ * options.
+ *
+ * Note that the `DataTable.ext` object is available through
+ * `jQuery.fn.dataTable.ext` where it may be accessed and manipulated. It is
+ * also aliased to `jQuery.fn.dataTableExt` for historic reasons.
* @namespace
* @extends DataTable.models.ext
*/
- DataTable.ext = $.extend( true, {}, DataTable.models.ext );
- $.extend( DataTable.ext.oStdClasses, {
+
+ /**
+ * DataTables extensions
+ *
+ * This namespace acts as a collection area for plug-ins that can be used to
+ * extend DataTables capabilities. Indeed many of the build in methods
+ * use this method to provide their own capabilities (sorting methods for
+ * example).
+ *
+ * Note that this namespace is aliased to `jQuery.fn.dataTableExt` for legacy
+ * reasons
+ *
+ * @namespace
+ */
+ DataTable.ext = _ext = {
+ /**
+ * Buttons. For use with the Buttons extension for DataTables. This is
+ * defined here so other extensions can define buttons regardless of load
+ * order. It is _not_ used by DataTables core.
+ *
+ * @type object
+ * @default {}
+ */
+ buttons: {},
+
+
+ /**
+ * Element class names
+ *
+ * @type object
+ * @default {}
+ */
+ classes: {},
+
+
+ /**
+ * DataTables build type (expanded by the download builder)
+ *
+ * @type string
+ */
+ builder: "-source-",
+
+
+ /**
+ * Error reporting.
+ *
+ * How should DataTables report an error. Can take the value 'alert',
+ * 'throw', 'none' or a function.
+ *
+ * @type string|function
+ * @default alert
+ */
+ errMode: "alert",
+
+
+ /**
+ * Feature plug-ins.
+ *
+ * This is an array of objects which describe the feature plug-ins that are
+ * available to DataTables. These feature plug-ins are then available for
+ * use through the `dom` initialisation option.
+ *
+ * Each feature plug-in is described by an object which must have the
+ * following properties:
+ *
+ * * `fnInit` - function that is used to initialise the plug-in,
+ * * `cFeature` - a character so the feature can be enabled by the `dom`
+ * instillation option. This is case sensitive.
+ *
+ * The `fnInit` function has the following input parameters:
+ *
+ * 1. `{object}` DataTables settings object: see
+ * {@link DataTable.models.oSettings}
+ *
+ * And the following return is expected:
+ *
+ * * {node|null} The element which contains your feature. Note that the
+ * return may also be void if your plug-in does not require to inject any
+ * DOM elements into DataTables control (`dom`) - for example this might
+ * be useful when developing a plug-in which allows table control via
+ * keyboard entry
+ *
+ * @type array
+ *
+ * @example
+ * $.fn.dataTable.ext.features.push( {
+ * "fnInit": function( oSettings ) {
+ * return new TableTools( { "oDTSettings": oSettings } );
+ * },
+ * "cFeature": "T"
+ * } );
+ */
+ feature: [],
+
+
+ /**
+ * Row searching.
+ *
+ * This method of searching is complimentary to the default type based
+ * searching, and a lot more comprehensive as it allows you complete control
+ * over the searching logic. Each element in this array is a function
+ * (parameters described below) that is called for every row in the table,
+ * and your logic decides if it should be included in the searching data set
+ * or not.
+ *
+ * Searching functions have the following input parameters:
+ *
+ * 1. `{object}` DataTables settings object: see
+ * {@link DataTable.models.oSettings}
+ * 2. `{array|object}` Data for the row to be processed (same as the
+ * original format that was passed in as the data source, or an array
+ * from a DOM data source
+ * 3. `{int}` Row index ({@link DataTable.models.oSettings.aoData}), which
+ * can be useful to retrieve the `TR` element if you need DOM interaction.
+ *
+ * And the following return is expected:
+ *
+ * * {boolean} Include the row in the searched result set (true) or not
+ * (false)
+ *
+ * Note that as with the main search ability in DataTables, technically this
+ * is "filtering", since it is subtractive. However, for consistency in
+ * naming we call it searching here.
+ *
+ * @type array
+ * @default []
+ *
+ * @example
+ * // The following example shows custom search being applied to the
+ * // fourth column (i.e. the data[3] index) based on two input values
+ * // from the end-user, matching the data in a certain range.
+ * $.fn.dataTable.ext.search.push(
+ * function( settings, data, dataIndex ) {
+ * var min = document.getElementById('min').value * 1;
+ * var max = document.getElementById('max').value * 1;
+ * var version = data[3] == "-" ? 0 : data[3]*1;
+ *
+ * if ( min == "" && max == "" ) {
+ * return true;
+ * }
+ * else if ( min == "" && version < max ) {
+ * return true;
+ * }
+ * else if ( min < version && "" == max ) {
+ * return true;
+ * }
+ * else if ( min < version && version < max ) {
+ * return true;
+ * }
+ * return false;
+ * }
+ * );
+ */
+ search: [],
+
+
+ /**
+ * Selector extensions
+ *
+ * The `selector` option can be used to extend the options available for the
+ * selector modifier options (`selector-modifier` object data type) that
+ * each of the three built in selector types offer (row, column and cell +
+ * their plural counterparts). For example the Select extension uses this
+ * mechanism to provide an option to select only rows, columns and cells
+ * that have been marked as selected by the end user (`{selected: true}`),
+ * which can be used in conjunction with the existing built in selector
+ * options.
+ *
+ * Each property is an array to which functions can be pushed. The functions
+ * take three attributes:
+ *
+ * * Settings object for the host table
+ * * Options object (`selector-modifier` object type)
+ * * Array of selected item indexes
+ *
+ * The return is an array of the resulting item indexes after the custom
+ * selector has been applied.
+ *
+ * @type object
+ */
+ selector: {
+ cell: [],
+ column: [],
+ row: []
+ },
+
+
+ /**
+ * Internal functions, exposed for used in plug-ins.
+ *
+ * Please note that you should not need to use the internal methods for
+ * anything other than a plug-in (and even then, try to avoid if possible).
+ * The internal function may change between releases.
+ *
+ * @type object
+ * @default {}
+ */
+ internal: {},
+
+
+ /**
+ * Legacy configuration options. Enable and disable legacy options that
+ * are available in DataTables.
+ *
+ * @type object
+ */
+ legacy: {
+ /**
+ * Enable / disable DataTables 1.9 compatible server-side processing
+ * requests
+ *
+ * @type boolean
+ * @default null
+ */
+ ajax: null
+ },
+
+
+ /**
+ * Pagination plug-in methods.
+ *
+ * Each entry in this object is a function and defines which buttons should
+ * be shown by the pagination rendering method that is used for the table:
+ * {@link DataTable.ext.renderer.pageButton}. The renderer addresses how the
+ * buttons are displayed in the document, while the functions here tell it
+ * what buttons to display. This is done by returning an array of button
+ * descriptions (what each button will do).
+ *
+ * Pagination types (the four built in options and any additional plug-in
+ * options defined here) can be used through the `paginationType`
+ * initialisation parameter.
+ *
+ * The functions defined take two parameters:
+ *
+ * 1. `{int} page` The current page index
+ * 2. `{int} pages` The number of pages in the table
+ *
+ * Each function is expected to return an array where each element of the
+ * array can be one of:
+ *
+ * * `first` - Jump to first page when activated
+ * * `last` - Jump to last page when activated
+ * * `previous` - Show previous page when activated
+ * * `next` - Show next page when activated
+ * * `{int}` - Show page of the index given
+ * * `{array}` - A nested array containing the above elements to add a
+ * containing 'DIV' element (might be useful for styling).
+ *
+ * Note that DataTables v1.9- used this object slightly differently whereby
+ * an object with two functions would be defined for each plug-in. That
+ * ability is still supported by DataTables 1.10+ to provide backwards
+ * compatibility, but this option of use is now decremented and no longer
+ * documented in DataTables 1.10+.
+ *
+ * @type object
+ * @default {}
+ *
+ * @example
+ * // Show previous, next and current page buttons only
+ * $.fn.dataTableExt.oPagination.current = function ( page, pages ) {
+ * return [ 'previous', page, 'next' ];
+ * };
+ */
+ pager: {},
+
+
+ renderer: {
+ pageButton: {},
+ header: {}
+ },
+
+
+ /**
+ * Ordering plug-ins - custom data source
+ *
+ * The extension options for ordering of data available here is complimentary
+ * to the default type based ordering that DataTables typically uses. It
+ * allows much greater control over the the data that is being used to
+ * order a column, but is necessarily therefore more complex.
+ *
+ * This type of ordering is useful if you want to do ordering based on data
+ * live from the DOM (for example the contents of an 'input' element) rather
+ * than just the static string that DataTables knows of.
+ *
+ * The way these plug-ins work is that you create an array of the values you
+ * wish to be ordering for the column in question and then return that
+ * array. The data in the array much be in the index order of the rows in
+ * the table (not the currently ordering order!). Which order data gathering
+ * function is run here depends on the `dt-init columns.orderDataType`
+ * parameter that is used for the column (if any).
+ *
+ * The functions defined take two parameters:
+ *
+ * 1. `{object}` DataTables settings object: see
+ * {@link DataTable.models.oSettings}
+ * 2. `{int}` Target column index
+ *
+ * Each function is expected to return an array:
+ *
+ * * `{array}` Data for the column to be ordering upon
+ *
+ * @type array
+ *
+ * @example
+ * // Ordering using `input` node values
+ * $.fn.dataTable.ext.order['dom-text'] = function ( settings, col )
+ * {
+ * return this.api().column( col, {order:'index'} ).nodes().map( function ( td, i ) {
+ * return $('input', td).val();
+ * } );
+ * }
+ */
+ order: {},
+
+
+ /**
+ * Type based plug-ins.
+ *
+ * Each column in DataTables has a type assigned to it, either by automatic
+ * detection or by direct assignment using the `type` option for the column.
+ * The type of a column will effect how it is ordering and search (plug-ins
+ * can also make use of the column type if required).
+ *
+ * @namespace
+ */
+ type: {
+ /**
+ * Type detection functions.
+ *
+ * The functions defined in this object are used to automatically detect
+ * a column's type, making initialisation of DataTables super easy, even
+ * when complex data is in the table.
+ *
+ * The functions defined take two parameters:
+ *
+ * 1. `{*}` Data from the column cell to be analysed
+ * 2. `{settings}` DataTables settings object. This can be used to
+ * perform context specific type detection - for example detection
+ * based on language settings such as using a comma for a decimal
+ * place. Generally speaking the options from the settings will not
+ * be required
+ *
+ * Each function is expected to return:
+ *
+ * * `{string|null}` Data type detected, or null if unknown (and thus
+ * pass it on to the other type detection functions.
+ *
+ * @type array
+ *
+ * @example
+ * // Currency type detection plug-in:
+ * $.fn.dataTable.ext.type.detect.push(
+ * function ( data, settings ) {
+ * // Check the numeric part
+ * if ( ! $.isNumeric( data.substring(1) ) ) {
+ * return null;
+ * }
+ *
+ * // Check prefixed by currency
+ * if ( data.charAt(0) == '$' || data.charAt(0) == '£' ) {
+ * return 'currency';
+ * }
+ * return null;
+ * }
+ * );
+ */
+ detect: [],
+
+
+ /**
+ * Type based search formatting.
+ *
+ * The type based searching functions can be used to pre-format the
+ * data to be search on. For example, it can be used to strip HTML
+ * tags or to de-format telephone numbers for numeric only searching.
+ *
+ * Note that is a search is not defined for a column of a given type,
+ * no search formatting will be performed.
+ *
+ * Pre-processing of searching data plug-ins - When you assign the sType
+ * for a column (or have it automatically detected for you by DataTables
+ * or a type detection plug-in), you will typically be using this for
+ * custom sorting, but it can also be used to provide custom searching
+ * by allowing you to pre-processing the data and returning the data in
+ * the format that should be searched upon. This is done by adding
+ * functions this object with a parameter name which matches the sType
+ * for that target column. This is the corollary of afnSortData
+ * for searching data.
+ *
+ * The functions defined take a single parameter:
+ *
+ * 1. `{*}` Data from the column cell to be prepared for searching
+ *
+ * Each function is expected to return:
+ *
+ * * `{string|null}` Formatted string that will be used for the searching.
+ *
+ * @type object
+ * @default {}
+ *
+ * @example
+ * $.fn.dataTable.ext.type.search['title-numeric'] = function ( d ) {
+ * return d.replace(/\n/g," ").replace( /<.*?>/g, "" );
+ * }
+ */
+ search: {},
+
+
+ /**
+ * Type based ordering.
+ *
+ * The column type tells DataTables what ordering to apply to the table
+ * when a column is sorted upon. The order for each type that is defined,
+ * is defined by the functions available in this object.
+ *
+ * Each ordering option can be described by three properties added to
+ * this object:
+ *
+ * * `{type}-pre` - Pre-formatting function
+ * * `{type}-asc` - Ascending order function
+ * * `{type}-desc` - Descending order function
+ *
+ * All three can be used together, only `{type}-pre` or only
+ * `{type}-asc` and `{type}-desc` together. It is generally recommended
+ * that only `{type}-pre` is used, as this provides the optimal
+ * implementation in terms of speed, although the others are provided
+ * for compatibility with existing Javascript sort functions.
+ *
+ * `{type}-pre`: Functions defined take a single parameter:
+ *
+ * 1. `{*}` Data from the column cell to be prepared for ordering
+ *
+ * And return:
+ *
+ * * `{*}` Data to be sorted upon
+ *
+ * `{type}-asc` and `{type}-desc`: Functions are typical Javascript sort
+ * functions, taking two parameters:
+ *
+ * 1. `{*}` Data to compare to the second parameter
+ * 2. `{*}` Data to compare to the first parameter
+ *
+ * And returning:
+ *
+ * * `{*}` Ordering match: <0 if first parameter should be sorted lower
+ * than the second parameter, ===0 if the two parameters are equal and
+ * >0 if the first parameter should be sorted height than the second
+ * parameter.
+ *
+ * @type object
+ * @default {}
+ *
+ * @example
+ * // Numeric ordering of formatted numbers with a pre-formatter
+ * $.extend( $.fn.dataTable.ext.type.order, {
+ * "string-pre": function(x) {
+ * a = (a === "-" || a === "") ? 0 : a.replace( /[^\d\-\.]/g, "" );
+ * return parseFloat( a );
+ * }
+ * } );
+ *
+ * @example
+ * // Case-sensitive string ordering, with no pre-formatting method
+ * $.extend( $.fn.dataTable.ext.order, {
+ * "string-case-asc": function(x,y) {
+ * return ((x < y) ? -1 : ((x > y) ? 1 : 0));
+ * },
+ * "string-case-desc": function(x,y) {
+ * return ((x < y) ? 1 : ((x > y) ? -1 : 0));
+ * }
+ * } );
+ */
+ order: {}
+ },
+
+ /**
+ * Unique DataTables instance counter
+ *
+ * @type int
+ * @private
+ */
+ _unique: 0,
+
+
+ //
+ // Depreciated
+ // The following properties are retained for backwards compatiblity only.
+ // The should not be used in new projects and will be removed in a future
+ // version
+ //
+
+ /**
+ * Version check function.
+ * @type function
+ * @depreciated Since 1.10
+ */
+ fnVersionCheck: DataTable.fnVersionCheck,
+
+
+ /**
+ * Index for what 'this' index API functions should use
+ * @type int
+ * @deprecated Since v1.10
+ */
+ iApiIndex: 0,
+
+
+ /**
+ * jQuery UI class container
+ * @type object
+ * @deprecated Since v1.10
+ */
+ oJUIClasses: {},
+
+
+ /**
+ * Software version
+ * @type string
+ * @deprecated Since v1.10
+ */
+ sVersion: DataTable.version
+ };
+
+
+ //
+ // Backwards compatibility. Alias to pre 1.10 Hungarian notation counter parts
+ //
+ $.extend( _ext, {
+ afnFiltering: _ext.search,
+ aTypes: _ext.type.detect,
+ ofnSearch: _ext.type.search,
+ oSort: _ext.type.order,
+ afnSortData: _ext.order,
+ aoFeatures: _ext.feature,
+ oApi: _ext.internal,
+ oStdClasses: _ext.classes,
+ oPagination: _ext.pager
+ } );
+
+
+ $.extend( DataTable.ext.classes, {
"sTable": "dataTable",
+ "sNoFooter": "no-footer",
- /* Two buttons buttons */
- "sPagePrevEnabled": "paginate_enabled_previous",
- "sPagePrevDisabled": "paginate_disabled_previous",
- "sPageNextEnabled": "paginate_enabled_next",
- "sPageNextDisabled": "paginate_disabled_next",
- "sPageJUINext": "",
- "sPageJUIPrev": "",
-
- /* Full numbers paging buttons */
+ /* Paging buttons */
"sPageButton": "paginate_button",
- "sPageButtonActive": "paginate_active",
- "sPageButtonStaticDisabled": "paginate_button paginate_button_disabled",
- "sPageFirst": "first",
- "sPagePrevious": "previous",
- "sPageNext": "next",
- "sPageLast": "last",
-
+ "sPageButtonActive": "current",
+ "sPageButtonDisabled": "disabled",
+
/* Striping classes */
"sStripeOdd": "odd",
"sStripeEven": "even",
-
+
/* Empty row */
"sRowEmpty": "dataTables_empty",
-
+
/* Features */
"sWrapper": "dataTables_wrapper",
"sFilter": "dataTables_filter",
@@ -11460,7 +14335,7 @@
"sPaging": "dataTables_paginate paging_", /* Note that the type is postfixed */
"sLength": "dataTables_length",
"sProcessing": "dataTables_processing",
-
+
/* Sorting */
"sSortAsc": "sorting_asc",
"sSortDesc": "sorting_desc",
@@ -11469,14 +14344,13 @@
"sSortableDesc": "sorting_desc_disabled",
"sSortableNone": "sorting_disabled",
"sSortColumn": "sorting_", /* Note that an int is postfixed for the sorting order */
- "sSortJUIAsc": "",
- "sSortJUIDesc": "",
- "sSortJUI": "",
- "sSortJUIAscAllowed": "",
- "sSortJUIDescAllowed": "",
- "sSortJUIWrapper": "",
- "sSortIcon": "",
-
+
+ /* Filtering */
+ "sFilterInput": "",
+
+ /* Page length */
+ "sLengthSelect": "",
+
/* Scrolling */
"sScrollWrapper": "dataTables_scroll",
"sScrollHead": "dataTables_scrollHead",
@@ -11484,518 +14358,765 @@
"sScrollBody": "dataTables_scrollBody",
"sScrollFoot": "dataTables_scrollFoot",
"sScrollFootInner": "dataTables_scrollFootInner",
-
+
/* Misc */
+ "sHeaderTH": "",
"sFooterTH": "",
+
+ // Deprecated
+ "sSortJUIAsc": "",
+ "sSortJUIDesc": "",
+ "sSortJUI": "",
+ "sSortJUIAscAllowed": "",
+ "sSortJUIDescAllowed": "",
+ "sSortJUIWrapper": "",
+ "sSortIcon": "",
"sJUIHeader": "",
"sJUIFooter": ""
} );
- $.extend( DataTable.ext.oJUIClasses, DataTable.ext.oStdClasses, {
- /* Two buttons buttons */
- "sPagePrevEnabled": "fg-button ui-button ui-state-default ui-corner-left",
- "sPagePrevDisabled": "fg-button ui-button ui-state-default ui-corner-left ui-state-disabled",
- "sPageNextEnabled": "fg-button ui-button ui-state-default ui-corner-right",
- "sPageNextDisabled": "fg-button ui-button ui-state-default ui-corner-right ui-state-disabled",
- "sPageJUINext": "ui-icon ui-icon-circle-arrow-e",
- "sPageJUIPrev": "ui-icon ui-icon-circle-arrow-w",
-
+ (function() {
+
+ // Reused strings for better compression. Closure compiler appears to have a
+ // weird edge case where it is trying to expand strings rather than use the
+ // variable version. This results in about 200 bytes being added, for very
+ // little preference benefit since it this run on script load only.
+ var _empty = '';
+ _empty = '';
+
+ var _stateDefault = _empty + 'ui-state-default';
+ var _sortIcon = _empty + 'css_right ui-icon ui-icon-';
+ var _headerFooter = _empty + 'fg-toolbar ui-toolbar ui-widget-header ui-helper-clearfix';
+
+ $.extend( DataTable.ext.oJUIClasses, DataTable.ext.classes, {
/* Full numbers paging buttons */
- "sPageButton": "fg-button ui-button ui-state-default",
- "sPageButtonActive": "fg-button ui-button ui-state-default ui-state-disabled",
- "sPageButtonStaticDisabled": "fg-button ui-button ui-state-default ui-state-disabled",
- "sPageFirst": "first ui-corner-tl ui-corner-bl",
- "sPageLast": "last ui-corner-tr ui-corner-br",
-
+ "sPageButton": "fg-button ui-button "+_stateDefault,
+ "sPageButtonActive": "ui-state-disabled",
+ "sPageButtonDisabled": "ui-state-disabled",
+
/* Features */
"sPaging": "dataTables_paginate fg-buttonset ui-buttonset fg-buttonset-multi "+
"ui-buttonset-multi paging_", /* Note that the type is postfixed */
-
+
/* Sorting */
- "sSortAsc": "ui-state-default",
- "sSortDesc": "ui-state-default",
- "sSortable": "ui-state-default",
- "sSortableAsc": "ui-state-default",
- "sSortableDesc": "ui-state-default",
- "sSortableNone": "ui-state-default",
- "sSortJUIAsc": "css_right ui-icon ui-icon-triangle-1-n",
- "sSortJUIDesc": "css_right ui-icon ui-icon-triangle-1-s",
- "sSortJUI": "css_right ui-icon ui-icon-carat-2-n-s",
- "sSortJUIAscAllowed": "css_right ui-icon ui-icon-carat-1-n",
- "sSortJUIDescAllowed": "css_right ui-icon ui-icon-carat-1-s",
- "sSortJUIWrapper": "DataTables_sort_wrapper",
- "sSortIcon": "DataTables_sort_icon",
-
+ "sSortAsc": _stateDefault+" sorting_asc",
+ "sSortDesc": _stateDefault+" sorting_desc",
+ "sSortable": _stateDefault+" sorting",
+ "sSortableAsc": _stateDefault+" sorting_asc_disabled",
+ "sSortableDesc": _stateDefault+" sorting_desc_disabled",
+ "sSortableNone": _stateDefault+" sorting_disabled",
+ "sSortJUIAsc": _sortIcon+"triangle-1-n",
+ "sSortJUIDesc": _sortIcon+"triangle-1-s",
+ "sSortJUI": _sortIcon+"carat-2-n-s",
+ "sSortJUIAscAllowed": _sortIcon+"carat-1-n",
+ "sSortJUIDescAllowed": _sortIcon+"carat-1-s",
+ "sSortJUIWrapper": "DataTables_sort_wrapper",
+ "sSortIcon": "DataTables_sort_icon",
+
/* Scrolling */
- "sScrollHead": "dataTables_scrollHead ui-state-default",
- "sScrollFoot": "dataTables_scrollFoot ui-state-default",
-
+ "sScrollHead": "dataTables_scrollHead "+_stateDefault,
+ "sScrollFoot": "dataTables_scrollFoot "+_stateDefault,
+
/* Misc */
- "sFooterTH": "ui-state-default",
- "sJUIHeader": "fg-toolbar ui-toolbar ui-widget-header ui-corner-tl ui-corner-tr ui-helper-clearfix",
- "sJUIFooter": "fg-toolbar ui-toolbar ui-widget-header ui-corner-bl ui-corner-br ui-helper-clearfix"
+ "sHeaderTH": _stateDefault,
+ "sFooterTH": _stateDefault,
+ "sJUIHeader": _headerFooter+" ui-corner-tl ui-corner-tr",
+ "sJUIFooter": _headerFooter+" ui-corner-bl ui-corner-br"
} );
- /*
- * Variable: oPagination
- * Purpose:
- * Scope: jQuery.fn.dataTableExt
- */
- $.extend( DataTable.ext.oPagination, {
- /*
- * Variable: two_button
- * Purpose: Standard two button (forward/back) pagination
- * Scope: jQuery.fn.dataTableExt.oPagination
- */
- "two_button": {
- /*
- * Function: oPagination.two_button.fnInit
- * Purpose: Initialise dom elements required for pagination with forward/back buttons only
- * Returns: -
- * Inputs: object:oSettings - dataTables settings object
- * node:nPaging - the DIV which contains this pagination control
- * function:fnCallbackDraw - draw function which must be called on update
- */
- "fnInit": function ( oSettings, nPaging, fnCallbackDraw )
- {
- var oLang = oSettings.oLanguage.oPaginate;
- var oClasses = oSettings.oClasses;
- var fnClickHandler = function ( e ) {
- if ( oSettings.oApi._fnPageChange( oSettings, e.data.action ) )
- {
- fnCallbackDraw( oSettings );
- }
- };
+ }());
- var sAppend = (!oSettings.bJUI) ?
- ''+oLang.sPrevious+''+
- ''+oLang.sNext+''
- :
- ''+
- '';
- $(nPaging).append( sAppend );
-
- var els = $('a', nPaging);
- var nPrevious = els[0],
- nNext = els[1];
-
- oSettings.oApi._fnBindAction( nPrevious, {action: "previous"}, fnClickHandler );
- oSettings.oApi._fnBindAction( nNext, {action: "next"}, fnClickHandler );
-
- /* ID the first elements only */
- if ( !oSettings.aanFeatures.p )
- {
- nPaging.id = oSettings.sTableId+'_paginate';
- nPrevious.id = oSettings.sTableId+'_previous';
- nNext.id = oSettings.sTableId+'_next';
- nPrevious.setAttribute('aria-controls', oSettings.sTableId);
- nNext.setAttribute('aria-controls', oSettings.sTableId);
- }
- },
-
- /*
- * Function: oPagination.two_button.fnUpdate
- * Purpose: Update the two button pagination at the end of the draw
- * Returns: -
- * Inputs: object:oSettings - dataTables settings object
- * function:fnCallbackDraw - draw function to call on page change
- */
- "fnUpdate": function ( oSettings, fnCallbackDraw )
- {
- if ( !oSettings.aanFeatures.p )
- {
- return;
- }
-
- var oClasses = oSettings.oClasses;
- var an = oSettings.aanFeatures.p;
- var nNode;
- /* Loop over each instance of the pager */
- for ( var i=0, iLen=an.length ; i= pages - 1 - half ) {
+ numbers = _range( pages-(buttons-2), pages );
+ numbers.splice( 0, 0, 'ellipsis' ); // no unshift in ie6
+ numbers.splice( 0, 0, 0 );
+ }
+ else {
+ numbers = _range( page-half+2, page+half-1 );
+ numbers.push( 'ellipsis' );
+ numbers.push( pages-1 );
+ numbers.splice( 0, 0, 'ellipsis' );
+ numbers.splice( 0, 0, 0 );
+ }
+
+ numbers.DT_el = 'span';
+ return numbers;
+ }
+
+
+ $.extend( extPagination, {
+ simple: function ( page, pages ) {
+ return [ 'previous', 'next' ];
},
-
-
- /*
- * Variable: iFullNumbersShowPages
- * Purpose: Change the number of pages which can be seen
- * Scope: jQuery.fn.dataTableExt.oPagination
- */
- "iFullNumbersShowPages": 5,
-
- /*
- * Variable: full_numbers
- * Purpose: Full numbers pagination
- * Scope: jQuery.fn.dataTableExt.oPagination
- */
- "full_numbers": {
- /*
- * Function: oPagination.full_numbers.fnInit
- * Purpose: Initialise dom elements required for pagination with a list of the pages
- * Returns: -
- * Inputs: object:oSettings - dataTables settings object
- * node:nPaging - the DIV which contains this pagination control
- * function:fnCallbackDraw - draw function which must be called on update
- */
- "fnInit": function ( oSettings, nPaging, fnCallbackDraw )
- {
- var oLang = oSettings.oLanguage.oPaginate;
- var oClasses = oSettings.oClasses;
- var fnClickHandler = function ( e ) {
- if ( oSettings.oApi._fnPageChange( oSettings, e.data.action ) )
- {
- fnCallbackDraw( oSettings );
+
+ full: function ( page, pages ) {
+ return [ 'first', 'previous', 'next', 'last' ];
+ },
+
+ numbers: function ( page, pages ) {
+ return [ _numbers(page, pages) ];
+ },
+
+ simple_numbers: function ( page, pages ) {
+ return [ 'previous', _numbers(page, pages), 'next' ];
+ },
+
+ full_numbers: function ( page, pages ) {
+ return [ 'first', 'previous', _numbers(page, pages), 'next', 'last' ];
+ },
+
+ // For testing and plug-ins to use
+ _numbers: _numbers,
+
+ // Number of number buttons (including ellipsis) to show. _Must be odd!_
+ numbers_length: 7
+ } );
+
+
+ $.extend( true, DataTable.ext.renderer, {
+ pageButton: {
+ _: function ( settings, host, idx, buttons, page, pages ) {
+ var classes = settings.oClasses;
+ var lang = settings.oLanguage.oPaginate;
+ var aria = settings.oLanguage.oAria.paginate || {};
+ var btnDisplay, btnClass, counter=0;
+
+ var attach = function( container, buttons ) {
+ var i, ien, node, button;
+ var clickHandler = function ( e ) {
+ _fnPageChange( settings, e.data.action, true );
+ };
+
+ for ( i=0, ien=buttons.length ; i' )
+ .appendTo( container );
+ attach( inner, button );
+ }
+ else {
+ btnDisplay = null;
+ btnClass = '';
+
+ switch ( button ) {
+ case 'ellipsis':
+ container.append('…');
+ break;
+
+ case 'first':
+ btnDisplay = lang.sFirst;
+ btnClass = button + (page > 0 ?
+ '' : ' '+classes.sPageButtonDisabled);
+ break;
+
+ case 'previous':
+ btnDisplay = lang.sPrevious;
+ btnClass = button + (page > 0 ?
+ '' : ' '+classes.sPageButtonDisabled);
+ break;
+
+ case 'next':
+ btnDisplay = lang.sNext;
+ btnClass = button + (page < pages-1 ?
+ '' : ' '+classes.sPageButtonDisabled);
+ break;
+
+ case 'last':
+ btnDisplay = lang.sLast;
+ btnClass = button + (page < pages-1 ?
+ '' : ' '+classes.sPageButtonDisabled);
+ break;
+
+ default:
+ btnDisplay = button + 1;
+ btnClass = page === button ?
+ classes.sPageButtonActive : '';
+ break;
+ }
+
+ if ( btnDisplay !== null ) {
+ node = $('', {
+ 'class': classes.sPageButton+' '+btnClass,
+ 'aria-controls': settings.sTableId,
+ 'aria-label': aria[ button ],
+ 'data-dt-idx': counter,
+ 'tabindex': settings.iTabIndex,
+ 'id': idx === 0 && typeof button === 'string' ?
+ settings.sTableId +'_'+ button :
+ null
+ } )
+ .html( btnDisplay )
+ .appendTo( container );
+
+ _fnBindAction(
+ node, {action: button}, clickHandler
+ );
+
+ counter++;
+ }
+ }
}
};
- $(nPaging).append(
- ''+oLang.sFirst+''+
- ''+oLang.sPrevious+''+
- ''+
- ''+oLang.sNext+''+
- ''+oLang.sLast+''
- );
- var els = $('a', nPaging);
- var nFirst = els[0],
- nPrev = els[1],
- nNext = els[2],
- nLast = els[3];
-
- oSettings.oApi._fnBindAction( nFirst, {action: "first"}, fnClickHandler );
- oSettings.oApi._fnBindAction( nPrev, {action: "previous"}, fnClickHandler );
- oSettings.oApi._fnBindAction( nNext, {action: "next"}, fnClickHandler );
- oSettings.oApi._fnBindAction( nLast, {action: "last"}, fnClickHandler );
-
- /* ID the first elements only */
- if ( !oSettings.aanFeatures.p )
- {
- nPaging.id = oSettings.sTableId+'_paginate';
- nFirst.id =oSettings.sTableId+'_first';
- nPrev.id =oSettings.sTableId+'_previous';
- nNext.id =oSettings.sTableId+'_next';
- nLast.id =oSettings.sTableId+'_last';
- }
- },
-
- /*
- * Function: oPagination.full_numbers.fnUpdate
- * Purpose: Update the list of page buttons shows
- * Returns: -
- * Inputs: object:oSettings - dataTables settings object
- * function:fnCallbackDraw - draw function to call on page change
- */
- "fnUpdate": function ( oSettings, fnCallbackDraw )
- {
- if ( !oSettings.aanFeatures.p )
- {
- return;
- }
-
- var iPageCount = DataTable.ext.oPagination.iFullNumbersShowPages;
- var iPageCountHalf = Math.floor(iPageCount / 2);
- var iPages = Math.ceil((oSettings.fnRecordsDisplay()) / oSettings._iDisplayLength);
- var iCurrentPage = Math.ceil(oSettings._iDisplayStart / oSettings._iDisplayLength) + 1;
- var sList = "";
- var iStartButton, iEndButton, i, iLen;
- var oClasses = oSettings.oClasses;
- var anButtons, anStatic, nPaginateList, nNode;
- var an = oSettings.aanFeatures.p;
- var fnBind = function (j) {
- oSettings.oApi._fnBindAction( this, {"page": j+iStartButton-1}, function(e) {
- /* Use the information in the element to jump to the required page */
- oSettings.oApi._fnPageChange( oSettings, e.data.page );
- fnCallbackDraw( oSettings );
- e.preventDefault();
- } );
- };
-
- /* Pages calculation */
- if ( oSettings._iDisplayLength === -1 )
- {
- iStartButton = 1;
- iEndButton = 1;
- iCurrentPage = 1;
- }
- else if (iPages < iPageCount)
- {
- iStartButton = 1;
- iEndButton = iPages;
- }
- else if (iCurrentPage <= iPageCountHalf)
- {
- iStartButton = 1;
- iEndButton = iPageCount;
- }
- else if (iCurrentPage >= (iPages - iPageCountHalf))
- {
- iStartButton = iPages - iPageCount + 1;
- iEndButton = iPages;
- }
- else
- {
- iStartButton = iCurrentPage - Math.ceil(iPageCount / 2) + 1;
- iEndButton = iStartButton + iPageCount - 1;
- }
+ // IE9 throws an 'unknown error' if document.activeElement is used
+ // inside an iframe or frame. Try / catch the error. Not good for
+ // accessibility, but neither are frames.
+ var activeEl;
-
- /* Build the dynamic list */
- for ( i=iStartButton ; i<=iEndButton ; i++ )
- {
- sList += (iCurrentPage !== i) ?
- ''+oSettings.fnFormatNumber(i)+'' :
- ''+oSettings.fnFormatNumber(i)+'';
+ try {
+ // Because this approach is destroying and recreating the paging
+ // elements, focus is lost on the select button which is bad for
+ // accessibility. So we want to restore focus once the draw has
+ // completed
+ activeEl = $(host).find(document.activeElement).data('dt-idx');
}
-
- /* Loop over each instance of the pager */
- for ( i=0, iLen=an.length ; i y) ? 1 : 0));
- },
-
- "string-desc": function ( x, y )
- {
- return ((x < y) ? 1 : ((x > y) ? -1 : 0));
- },
-
-
- /*
- * html sorting (ignore html tags)
- */
- "html-pre": function ( a )
- {
- return a.replace( /<.*?>/g, "" ).toLowerCase();
- },
-
- "html-asc": function ( x, y )
- {
- return ((x < y) ? -1 : ((x > y) ? 1 : 0));
- },
-
- "html-desc": function ( x, y )
- {
- return ((x < y) ? 1 : ((x > y) ? -1 : 0));
- },
-
-
- /*
- * date sorting
- */
- "date-pre": function ( a )
- {
- var x = Date.parse( a );
-
- if ( isNaN(x) || x==="" )
- {
- x = Date.parse( "01/01/1970 00:00:00" );
- }
- return x;
- },
-
- "date-asc": function ( x, y )
- {
- return x - y;
- },
-
- "date-desc": function ( x, y )
- {
- return y - x;
- },
-
-
- /*
- * numerical sorting
- */
- "numeric-pre": function ( a )
- {
- return (a=="-" || a==="") ? 0 : a*1;
- },
-
- "numeric-asc": function ( x, y )
- {
- return x - y;
- },
-
- "numeric-desc": function ( x, y )
- {
- return y - x;
- }
- } );
- $.extend( DataTable.ext.aTypes, [
- /*
- * Function: -
- * Purpose: Check to see if a string is numeric
- * Returns: string:'numeric' or null
- * Inputs: mixed:sText - string to check
- */
- function ( sData )
+ // Built in type detection. See model.ext.aTypes for information about
+ // what is required from this methods.
+ $.extend( DataTable.ext.type.detect, [
+ // Plain numbers - first since V8 detects some plain numbers as dates
+ // e.g. Date.parse('55') (but not all, e.g. Date.parse('22')...).
+ function ( d, settings )
{
- /* Allow zero length strings as a number */
- if ( typeof sData === 'number' )
- {
- return 'numeric';
- }
- else if ( typeof sData !== 'string' )
- {
+ var decimal = settings.oLanguage.sDecimal;
+ return _isNumber( d, decimal ) ? 'num'+decimal : null;
+ },
+
+ // Dates (only those recognised by the browser's Date.parse)
+ function ( d, settings )
+ {
+ // V8 will remove any unknown characters at the start and end of the
+ // expression, leading to false matches such as `$245.12` or `10%` being
+ // a valid date. See forum thread 18941 for detail.
+ if ( d && !(d instanceof Date) && ( ! _re_date_start.test(d) || ! _re_date_end.test(d) ) ) {
return null;
}
-
- var sValidFirstChars = "0123456789-";
- var sValidChars = "0123456789.";
- var Char;
- var bDecimal = false;
-
- /* Check for a valid first char (no period and allow negatives) */
- Char = sData.charAt(0);
- if (sValidFirstChars.indexOf(Char) == -1)
- {
- return null;
- }
-
- /* Check all the other characters are valid */
- for ( var i=1 ; i') != -1 )
- {
- return 'html';
- }
- return null;
+ var decimal = settings.oLanguage.sDecimal;
+ return _htmlNumeric( d, decimal ) ? 'html-num'+decimal : null;
+ },
+
+ // HTML numeric, formatted
+ function ( d, settings )
+ {
+ var decimal = settings.oLanguage.sDecimal;
+ return _htmlNumeric( d, decimal, true ) ? 'html-num-fmt'+decimal : null;
+ },
+
+ // HTML (this is strict checking - there must be html)
+ function ( d, settings )
+ {
+ return _empty( d ) || (typeof d === 'string' && d.indexOf('<') !== -1) ?
+ 'html' : null;
}
] );
+
+
+ // Filter formatting functions. See model.ext.ofnSearch for information about
+ // what is required from these methods.
+ //
+ // Note that additional search methods are added for the html numbers and
+ // html formatted numbers by `_addNumericSort()` when we know what the decimal
+ // place is
+
+
+ $.extend( DataTable.ext.type.search, {
+ html: function ( data ) {
+ return _empty(data) ?
+ data :
+ typeof data === 'string' ?
+ data
+ .replace( _re_new_lines, " " )
+ .replace( _re_html, "" ) :
+ '';
+ },
+
+ string: function ( data ) {
+ return _empty(data) ?
+ data :
+ typeof data === 'string' ?
+ data.replace( _re_new_lines, " " ) :
+ data;
+ }
+ } );
+
+
+
+ var __numericReplace = function ( d, decimalPlace, re1, re2 ) {
+ if ( d !== 0 && (!d || d === '-') ) {
+ return -Infinity;
+ }
+
+ // If a decimal place other than `.` is used, it needs to be given to the
+ // function so we can detect it and replace with a `.` which is the only
+ // decimal place Javascript recognises - it is not locale aware.
+ if ( decimalPlace ) {
+ d = _numToDecimal( d, decimalPlace );
+ }
+
+ if ( d.replace ) {
+ if ( re1 ) {
+ d = d.replace( re1, '' );
+ }
+
+ if ( re2 ) {
+ d = d.replace( re2, '' );
+ }
+ }
+
+ return d * 1;
+ };
+
+
+ // Add the numeric 'deformatting' functions for sorting and search. This is done
+ // in a function to provide an easy ability for the language options to add
+ // additional methods if a non-period decimal place is used.
+ function _addNumericSort ( decimalPlace ) {
+ $.each(
+ {
+ // Plain numbers
+ "num": function ( d ) {
+ return __numericReplace( d, decimalPlace );
+ },
+
+ // Formatted numbers
+ "num-fmt": function ( d ) {
+ return __numericReplace( d, decimalPlace, _re_formatted_numeric );
+ },
+
+ // HTML numeric
+ "html-num": function ( d ) {
+ return __numericReplace( d, decimalPlace, _re_html );
+ },
+
+ // HTML numeric, formatted
+ "html-num-fmt": function ( d ) {
+ return __numericReplace( d, decimalPlace, _re_html, _re_formatted_numeric );
+ }
+ },
+ function ( key, fn ) {
+ // Add the ordering method
+ _ext.type.order[ key+decimalPlace+'-pre' ] = fn;
+
+ // For HTML types add a search formatter that will strip the HTML
+ if ( key.match(/^html\-/) ) {
+ _ext.type.search[ key+decimalPlace ] = _ext.type.search.html;
+ }
+ }
+ );
+ }
+
+
+ // Default sort methods
+ $.extend( _ext.type.order, {
+ // Dates
+ "date-pre": function ( d ) {
+ return Date.parse( d ) || 0;
+ },
+
+ // html
+ "html-pre": function ( a ) {
+ return _empty(a) ?
+ '' :
+ a.replace ?
+ a.replace( /<.*?>/g, "" ).toLowerCase() :
+ a+'';
+ },
+
+ // string
+ "string-pre": function ( a ) {
+ // This is a little complex, but faster than always calling toString,
+ // http://jsperf.com/tostring-v-check
+ return _empty(a) ?
+ '' :
+ typeof a === 'string' ?
+ a.toLowerCase() :
+ ! a.toString ?
+ '' :
+ a.toString();
+ },
+
+ // string-asc and -desc are retained only for compatibility with the old
+ // sort methods
+ "string-asc": function ( x, y ) {
+ return ((x < y) ? -1 : ((x > y) ? 1 : 0));
+ },
+
+ "string-desc": function ( x, y ) {
+ return ((x < y) ? 1 : ((x > y) ? -1 : 0));
+ }
+ } );
+
+
+ // Numeric sorting types - order doesn't matter here
+ _addNumericSort( '' );
+
+
+ $.extend( true, DataTable.ext.renderer, {
+ header: {
+ _: function ( settings, cell, column, classes ) {
+ // No additional mark-up required
+ // Attach a sort listener to update on sort - note that using the
+ // `DT` namespace will allow the event to be removed automatically
+ // on destroy, while the `dt` namespaced event is the one we are
+ // listening for
+ $(settings.nTable).on( 'order.dt.DT', function ( e, ctx, sorting, columns ) {
+ if ( settings !== ctx ) { // need to check this this is the host
+ return; // table, not a nested one
+ }
+
+ var colIdx = column.idx;
+
+ cell
+ .removeClass(
+ column.sSortingClass +' '+
+ classes.sSortAsc +' '+
+ classes.sSortDesc
+ )
+ .addClass( columns[ colIdx ] == 'asc' ?
+ classes.sSortAsc : columns[ colIdx ] == 'desc' ?
+ classes.sSortDesc :
+ column.sSortingClass
+ );
+ } );
+ },
+
+ jqueryui: function ( settings, cell, column, classes ) {
+ $('')
+ .addClass( classes.sSortJUIWrapper )
+ .append( cell.contents() )
+ .append( $('')
+ .addClass( classes.sSortIcon+' '+column.sSortingClassJUI )
+ )
+ .appendTo( cell );
+
+ // Attach a sort listener to update on sort
+ $(settings.nTable).on( 'order.dt.DT', function ( e, ctx, sorting, columns ) {
+ if ( settings !== ctx ) {
+ return;
+ }
+
+ var colIdx = column.idx;
+
+ cell
+ .removeClass( classes.sSortAsc +" "+classes.sSortDesc )
+ .addClass( columns[ colIdx ] == 'asc' ?
+ classes.sSortAsc : columns[ colIdx ] == 'desc' ?
+ classes.sSortDesc :
+ column.sSortingClass
+ );
+
+ cell
+ .find( 'span.'+classes.sSortIcon )
+ .removeClass(
+ classes.sSortJUIAsc +" "+
+ classes.sSortJUIDesc +" "+
+ classes.sSortJUI +" "+
+ classes.sSortJUIAscAllowed +" "+
+ classes.sSortJUIDescAllowed
+ )
+ .addClass( columns[ colIdx ] == 'asc' ?
+ classes.sSortJUIAsc : columns[ colIdx ] == 'desc' ?
+ classes.sSortJUIDesc :
+ column.sSortingClassJUI
+ );
+ } );
+ }
+ }
+ } );
+
+ /*
+ * Public helper functions. These aren't used internally by DataTables, or
+ * called by any of the options passed into DataTables, but they can be used
+ * externally by developers working with DataTables. They are helper functions
+ * to make working with DataTables a little bit easier.
+ */
+
+ var __htmlEscapeEntities = function ( d ) {
+ return typeof d === 'string' ?
+ d.replace(//g, '>').replace(/"/g, '"') :
+ d;
+ };
+
+ /**
+ * Helpers for `columns.render`.
+ *
+ * The options defined here can be used with the `columns.render` initialisation
+ * option to provide a display renderer. The following functions are defined:
+ *
+ * * `number` - Will format numeric data (defined by `columns.data`) for
+ * display, retaining the original unformatted data for sorting and filtering.
+ * It takes 5 parameters:
+ * * `string` - Thousands grouping separator
+ * * `string` - Decimal point indicator
+ * * `integer` - Number of decimal points to show
+ * * `string` (optional) - Prefix.
+ * * `string` (optional) - Postfix (/suffix).
+ * * `text` - Escape HTML to help prevent XSS attacks. It has no optional
+ * parameters.
+ *
+ * @example
+ * // Column definition using the number renderer
+ * {
+ * data: "salary",
+ * render: $.fn.dataTable.render.number( '\'', '.', 0, '$' )
+ * }
+ *
+ * @namespace
+ */
+ DataTable.render = {
+ number: function ( thousands, decimal, precision, prefix, postfix ) {
+ return {
+ display: function ( d ) {
+ if ( typeof d !== 'number' && typeof d !== 'string' ) {
+ return d;
+ }
+
+ var negative = d < 0 ? '-' : '';
+ var flo = parseFloat( d );
+
+ // If NaN then there isn't much formatting that we can do - just
+ // return immediately, escaping any HTML (this was supposed to
+ // be a number after all)
+ if ( isNaN( flo ) ) {
+ return __htmlEscapeEntities( d );
+ }
+
+ d = Math.abs( flo );
+
+ var intPart = parseInt( d, 10 );
+ var floatPart = precision ?
+ decimal+(d - intPart).toFixed( precision ).substring( 2 ):
+ '';
+
+ return negative + (prefix||'') +
+ intPart.toString().replace(
+ /\B(?=(\d{3})+(?!\d))/g, thousands
+ ) +
+ floatPart +
+ (postfix||'');
+ }
+ };
+ },
+
+ text: function () {
+ return {
+ display: __htmlEscapeEntities
+ };
+ }
+ };
+
+
+ /*
+ * This is really a good bit rubbish this method of exposing the internal methods
+ * publicly... - To be fixed in 2.0 using methods on the prototype
+ */
+
+
+ /**
+ * Create a wrapper function for exporting an internal functions to an external API.
+ * @param {string} fn API function name
+ * @returns {function} wrapped function
+ * @memberof DataTable#internal
+ */
+ function _fnExternApiFunc (fn)
+ {
+ return function() {
+ var args = [_fnSettingsFromNode( this[DataTable.ext.iApiIndex] )].concat(
+ Array.prototype.slice.call(arguments)
+ );
+ return DataTable.ext.internal[fn].apply( this, args );
+ };
+ }
+
+
+ /**
+ * Reference to internal functions for use by plug-in developers. Note that
+ * these methods are references to internal functions and are considered to be
+ * private. If you use these methods, be aware that they are liable to change
+ * between versions.
+ * @namespace
+ */
+ $.extend( DataTable.ext.internal, {
+ _fnExternApiFunc: _fnExternApiFunc,
+ _fnBuildAjax: _fnBuildAjax,
+ _fnAjaxUpdate: _fnAjaxUpdate,
+ _fnAjaxParameters: _fnAjaxParameters,
+ _fnAjaxUpdateDraw: _fnAjaxUpdateDraw,
+ _fnAjaxDataSrc: _fnAjaxDataSrc,
+ _fnAddColumn: _fnAddColumn,
+ _fnColumnOptions: _fnColumnOptions,
+ _fnAdjustColumnSizing: _fnAdjustColumnSizing,
+ _fnVisibleToColumnIndex: _fnVisibleToColumnIndex,
+ _fnColumnIndexToVisible: _fnColumnIndexToVisible,
+ _fnVisbleColumns: _fnVisbleColumns,
+ _fnGetColumns: _fnGetColumns,
+ _fnColumnTypes: _fnColumnTypes,
+ _fnApplyColumnDefs: _fnApplyColumnDefs,
+ _fnHungarianMap: _fnHungarianMap,
+ _fnCamelToHungarian: _fnCamelToHungarian,
+ _fnLanguageCompat: _fnLanguageCompat,
+ _fnBrowserDetect: _fnBrowserDetect,
+ _fnAddData: _fnAddData,
+ _fnAddTr: _fnAddTr,
+ _fnNodeToDataIndex: _fnNodeToDataIndex,
+ _fnNodeToColumnIndex: _fnNodeToColumnIndex,
+ _fnGetCellData: _fnGetCellData,
+ _fnSetCellData: _fnSetCellData,
+ _fnSplitObjNotation: _fnSplitObjNotation,
+ _fnGetObjectDataFn: _fnGetObjectDataFn,
+ _fnSetObjectDataFn: _fnSetObjectDataFn,
+ _fnGetDataMaster: _fnGetDataMaster,
+ _fnClearTable: _fnClearTable,
+ _fnDeleteIndex: _fnDeleteIndex,
+ _fnInvalidate: _fnInvalidate,
+ _fnGetRowElements: _fnGetRowElements,
+ _fnCreateTr: _fnCreateTr,
+ _fnBuildHead: _fnBuildHead,
+ _fnDrawHead: _fnDrawHead,
+ _fnDraw: _fnDraw,
+ _fnReDraw: _fnReDraw,
+ _fnAddOptionsHtml: _fnAddOptionsHtml,
+ _fnDetectHeader: _fnDetectHeader,
+ _fnGetUniqueThs: _fnGetUniqueThs,
+ _fnFeatureHtmlFilter: _fnFeatureHtmlFilter,
+ _fnFilterComplete: _fnFilterComplete,
+ _fnFilterCustom: _fnFilterCustom,
+ _fnFilterColumn: _fnFilterColumn,
+ _fnFilter: _fnFilter,
+ _fnFilterCreateSearch: _fnFilterCreateSearch,
+ _fnEscapeRegex: _fnEscapeRegex,
+ _fnFilterData: _fnFilterData,
+ _fnFeatureHtmlInfo: _fnFeatureHtmlInfo,
+ _fnUpdateInfo: _fnUpdateInfo,
+ _fnInfoMacros: _fnInfoMacros,
+ _fnInitialise: _fnInitialise,
+ _fnInitComplete: _fnInitComplete,
+ _fnLengthChange: _fnLengthChange,
+ _fnFeatureHtmlLength: _fnFeatureHtmlLength,
+ _fnFeatureHtmlPaginate: _fnFeatureHtmlPaginate,
+ _fnPageChange: _fnPageChange,
+ _fnFeatureHtmlProcessing: _fnFeatureHtmlProcessing,
+ _fnProcessingDisplay: _fnProcessingDisplay,
+ _fnFeatureHtmlTable: _fnFeatureHtmlTable,
+ _fnScrollDraw: _fnScrollDraw,
+ _fnApplyToChildren: _fnApplyToChildren,
+ _fnCalculateColumnWidths: _fnCalculateColumnWidths,
+ _fnThrottle: _fnThrottle,
+ _fnConvertToWidth: _fnConvertToWidth,
+ _fnGetWidestNode: _fnGetWidestNode,
+ _fnGetMaxLenString: _fnGetMaxLenString,
+ _fnStringToCss: _fnStringToCss,
+ _fnSortFlatten: _fnSortFlatten,
+ _fnSort: _fnSort,
+ _fnSortAria: _fnSortAria,
+ _fnSortListener: _fnSortListener,
+ _fnSortAttachListener: _fnSortAttachListener,
+ _fnSortingClasses: _fnSortingClasses,
+ _fnSortData: _fnSortData,
+ _fnSaveState: _fnSaveState,
+ _fnLoadState: _fnLoadState,
+ _fnSettingsFromNode: _fnSettingsFromNode,
+ _fnLog: _fnLog,
+ _fnMap: _fnMap,
+ _fnBindAction: _fnBindAction,
+ _fnCallbackReg: _fnCallbackReg,
+ _fnCallbackFire: _fnCallbackFire,
+ _fnLengthOverflow: _fnLengthOverflow,
+ _fnRenderer: _fnRenderer,
+ _fnDataSource: _fnDataSource,
+ _fnRowAttributes: _fnRowAttributes,
+ _fnCalculateEnd: function () {} // Used by a lot of plug-ins, but redundant
+ // in 1.10, so this dead-end function is
+ // added to prevent errors
+ } );
+
- // jQuery aliases
- $.fn.DataTable = DataTable;
+ // jQuery access
$.fn.dataTable = DataTable;
+
+ // Provide access to the host jQuery object (circular reference)
+ DataTable.$ = $;
+
+ // Legacy aliases
$.fn.dataTableSettings = DataTable.settings;
$.fn.dataTableExt = DataTable.ext;
+ // With a capital `D` we return a DataTables API instance rather than a
+ // jQuery object
+ $.fn.DataTable = function ( opts ) {
+ return $(this).dataTable( opts ).api();
+ };
+
+ // All properties that are available to $.fn.dataTable should also be
+ // available on $.fn.DataTable
+ $.each( DataTable, function ( prop, val ) {
+ $.fn.DataTable[ prop ] = val;
+ } );
+
// Information about events fired by DataTables - for documentation.
/**
- * Draw event, fired whenever the table is redrawn on the page, at the same point as
- * fnDrawCallback. This may be useful for binding events or performing calculations when
- * the table is altered at all.
- * @name DataTable#draw
+ * Draw event, fired whenever the table is redrawn on the page, at the same
+ * point as fnDrawCallback. This may be useful for binding events or
+ * performing calculations when the table is altered at all.
+ * @name DataTable#draw.dt
* @event
* @param {event} e jQuery event object
* @param {object} o DataTables settings object {@link DataTable.models.oSettings}
*/
/**
- * Filter event, fired when the filtering applied to the table (using the build in global
- * global filter, or column filters) is altered.
- * @name DataTable#filter
+ * Search event, fired when the searching applied to the table (using the
+ * built-in global search, or column filters) is altered.
+ * @name DataTable#search.dt
* @event
* @param {event} e jQuery event object
* @param {object} o DataTables settings object {@link DataTable.models.oSettings}
@@ -12003,24 +15124,24 @@
/**
* Page change event, fired when the paging of the table is altered.
- * @name DataTable#page
+ * @name DataTable#page.dt
* @event
* @param {event} e jQuery event object
* @param {object} o DataTables settings object {@link DataTable.models.oSettings}
*/
/**
- * Sort event, fired when the sorting applied to the table is altered.
- * @name DataTable#sort
+ * Order event, fired when the ordering applied to the table is altered.
+ * @name DataTable#order.dt
* @event
* @param {event} e jQuery event object
* @param {object} o DataTables settings object {@link DataTable.models.oSettings}
*/
/**
- * DataTables initialisation complete event, fired when the table is fully drawn,
- * including Ajax data loaded, if Ajax data is required.
- * @name DataTable#init
+ * DataTables initialisation complete event, fired when the table is fully
+ * drawn, including Ajax data loaded, if Ajax data is required.
+ * @name DataTable#init.dt
* @event
* @param {event} e jQuery event object
* @param {object} oSettings DataTables settings object
@@ -12029,11 +15150,11 @@
*/
/**
- * State save event, fired when the table has changed state a new state save is required.
- * This method allows modification of the state saving object prior to actually doing the
- * save, including addition or other state properties (for plug-ins) or modification
- * of a DataTables core property.
- * @name DataTable#stateSaveParams
+ * State save event, fired when the table has changed state a new state save
+ * is required. This event allows modification of the state saving object
+ * prior to actually doing the save, including addition or other state
+ * properties (for plug-ins) or modification of a DataTables core property.
+ * @name DataTable#stateSaveParams.dt
* @event
* @param {event} e jQuery event object
* @param {object} oSettings DataTables settings object
@@ -12041,10 +15162,11 @@
*/
/**
- * State load event, fired when the table is loading state from the stored data, but
- * prior to the settings object being modified by the saved state - allowing modification
- * of the saved state is required or loading of state for a plug-in.
- * @name DataTable#stateLoadParams
+ * State load event, fired when the table is loading state from the stored
+ * data, but prior to the settings object being modified by the saved state
+ * - allowing modification of the saved state is required or loading of
+ * state for a plug-in.
+ * @name DataTable#stateLoadParams.dt
* @event
* @param {event} e jQuery event object
* @param {object} oSettings DataTables settings object
@@ -12052,9 +15174,9 @@
*/
/**
- * State loaded event, fired when state has been loaded from stored data and the settings
- * object has been modified by the loaded data.
- * @name DataTable#stateLoaded
+ * State loaded event, fired when state has been loaded from stored data and
+ * the settings object has been modified by the loaded data.
+ * @name DataTable#stateLoaded.dt
* @event
* @param {event} e jQuery event object
* @param {object} oSettings DataTables settings object
@@ -12062,10 +15184,11 @@
*/
/**
- * Processing event, fired when DataTables is doing some kind of processing (be it,
- * sort, filter or anything else). Can be used to indicate to the end user that
- * there is something happening, or that something has finished.
- * @name DataTable#processing
+ * Processing event, fired when DataTables is doing some kind of processing
+ * (be it, order, searcg or anything else). It can be used to indicate to
+ * the end user that there is something happening, or that something has
+ * finished.
+ * @name DataTable#processing.dt
* @event
* @param {event} e jQuery event object
* @param {object} oSettings DataTables settings object
@@ -12073,27 +15196,73 @@
*/
/**
- * Ajax (XHR) event, fired whenever an Ajax request is completed from a request to
- * made to the server for new data (note that this trigger is called in fnServerData,
- * if you override fnServerData and which to use this event, you need to trigger it in
- * you success function).
- * @name DataTable#xhr
+ * Ajax (XHR) event, fired whenever an Ajax request is completed from a
+ * request to made to the server for new data. This event is called before
+ * DataTables processed the returned data, so it can also be used to pre-
+ * process the data returned from the server, if needed.
+ *
+ * Note that this trigger is called in `fnServerData`, if you override
+ * `fnServerData` and which to use this event, you need to trigger it in you
+ * success function.
+ * @name DataTable#xhr.dt
* @event
* @param {event} e jQuery event object
* @param {object} o DataTables settings object {@link DataTable.models.oSettings}
* @param {object} json JSON returned from the server
+ *
+ * @example
+ * // Use a custom property returned from the server in another DOM element
+ * $('#table').dataTable().on('xhr.dt', function (e, settings, json) {
+ * $('#status').html( json.status );
+ * } );
+ *
+ * @example
+ * // Pre-process the data returned from the server
+ * $('#table').dataTable().on('xhr.dt', function (e, settings, json) {
+ * for ( var i=0, ien=json.aaData.length ; i