adam/Meck
1
0
Fork 0
mirror of https://github.com/pelgraine/Meck.git synced 2026-06-16 16:05:05 +02:00
Code Issues Packages Projects Releases Wiki Activity
Files
dev
Meck/variants/lilygo_tdeck_max/platformio.ini
T
pelgraine c72253eb7b update firmware version and build date
2026-06-10 23:16:32 +10:00

247 lines
8.2 KiB
INI
Raw Permalink Blame History

; =============================================================================
; T-Deck Pro MAX V0.1 — Meck Build Environments
;
; Hardware: ESP32-S3 + XL9555 I/O expander + combined 4G (A7682E) + Audio (ES8311)
;
; Key differences from LilyGo_TDeck_Pro (V1.1):
; - Peripheral power controlled via XL9555 (not direct GPIO)
; - 4G modem and ES8311 audio coexist (no longer mutually exclusive)
; - ES8311 I2C codec replaces PCM5102A (different I2S pins, needs I2C config)
; - Several GPIO reassignments (see variant.h for full map)
; - 1500 mAh battery (was 1400)
; - Working e-ink front-light on IO41
;
; WHAT WORKS OUT OF THE BOX:
; LoRa mesh, keyboard, e-ink display, GPS, touchscreen, battery management,
; SD card, text reader, notes, contacts, channels, settings, discovery,
; last heard, repeater admin, web reader (WiFi builds), OTA update.
;
; NEEDS ADAPTATION (future work):
; - HAS_4G_MODEM: ModemManager uses direct GPIO for MODEM_POWER_EN/PWRKEY
; which are XL9555-routed on MAX. Needs board.modemPowerOn() etc.
; - MECK_AUDIO_VARIANT: ES8311 needs I2C codec init (PCM5102A didn't).
; I2S pins are different. AudiobookPlayerScreen needs ES8311 driver.
; - Combined 4G+audio: existing #ifdef guards treat them as mutually
; exclusive. Needs restructuring for coexistence.
; =============================================================================
; ---------------------------------------------------------------------------
; Base environment for T-Deck Pro MAX
; ---------------------------------------------------------------------------
[LilyGo_TDeck_Pro_Max]
extends = esp32_base
extra_scripts = post:merge_firmware.py
board = t-deck_pro_max
board_build.flash_mode = qio
board_build.f_flash = 80000000L
board_build.arduino.memory_type = qio_qspi
board_upload.flash_size = 16MB
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
; Include MAX variant first (for variant.h, target.h, TDeckProMaxBoard.h)
; then V1.1 variant (for TDeckBoard.h, which TDeckProMaxBoard inherits from)
-I variants/lilygo_tdeck_max
-I variants/LilyGo_TDeck_Pro
; Both defines needed: LilyGo_TDeck_Pro for existing UI code guards,
; LilyGo_TDeck_Pro_Max for MAX-specific code paths
-D LilyGo_TDeck_Pro
-D LilyGo_TDeck_Pro_Max
-D HAS_XL9555=1
-D HAS_GPS=1
-D BOARD_HAS_PSRAM=1
-D CORE_DEBUG_LEVEL=1
-D FORMAT_SPIFFS_IF_FAILED=1
-D FORMAT_LITTLEFS_IF_FAILED=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_DIO2_AS_RF_SWITCH
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D SX126X_DIO3_TCXO_VOLTAGE=2.4f
; LoRa SPI pins (direct GPIO — unchanged from V1.1)
-D P_LORA_DIO_1=5
-D P_LORA_NSS=3
-D P_LORA_RESET=4
-D P_LORA_BUSY=6
-D P_LORA_SCLK=36
-D P_LORA_MISO=47
-D P_LORA_MOSI=33
; P_LORA_EN deliberately NOT defined — LoRa power via XL9555 in board.begin()
; GPS pins (direct GPIO — changed from V1.1!)
-D ENV_INCLUDE_GPS=1
-D ENV_SKIP_GPS_DETECT=1
-D PIN_GPS_RX=2
-D PIN_GPS_TX=16
-D GPS_BAUD_RATE=38400
; Sensor exclusions (same as V1.1)
-D ENV_INCLUDE_AHTX0=0
-D ENV_INCLUDE_BME280=0
-D ENV_INCLUDE_BMP280=0
-D ENV_INCLUDE_SHTC3=0
-D ENV_INCLUDE_SHT4X=0
-D ENV_INCLUDE_LPS22HB=0
-D ENV_INCLUDE_INA3221=0
-D ENV_INCLUDE_INA219=0
-D ENV_INCLUDE_INA226=0
-D ENV_INCLUDE_INA260=0
-D ENV_INCLUDE_MLX90614=0
-D ENV_INCLUDE_VL53L0X=0
-D ENV_INCLUDE_BME680=0
-D ENV_INCLUDE_BMP085=0
; E-ink display (pin changes from V1.1: RST=9, BL=41)
-D USE_EINK
-D DISPLAY_CLASS=GxEPDDisplay
-D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
-D EINK_WIDTH=240
-D EINK_HEIGHT=320
-D EINK_CS=34
-D EINK_DC=35
-D EINK_RST=9
-D EINK_BUSY=37
-D EINK_SCLK=36
-D EINK_MOSI=33
-D EINK_BL=41
-D EINK_NOT_HIBERNATE=1
; Battery (1500 mAh on MAX, was 1400 on V1.1)
-D HAS_BQ27220=1
-D AUTO_SHUTDOWN_MILLIVOLTS=2800
; Display rendering parameters
-D EINK_LIMIT_FASTREFRESH=10
-D EINK_LIMIT_GHOSTING_PX=2000
-D DISPLAY_ROTATION=0
-D EINK_ROTATION=0
-D EINK_SCALE_X=1.875f
-D EINK_SCALE_Y=2.5f
-D EINK_X_OFFSET=2
-D EINK_Y_OFFSET=5
; Legacy display pin aliases (for GxEPDDisplay.cpp)
-D PIN_DISPLAY_CS=34
-D PIN_DISPLAY_DC=35
-D PIN_DISPLAY_RST=9
-D PIN_DISPLAY_BUSY=37
-D PIN_DISPLAY_SCLK=36
-D PIN_DISPLAY_MISO=-1
-D PIN_DISPLAY_MOSI=33
; -D PIN_DISPLAY_BL=41
-D PIN_USER_BTN=0
; Touch (INT is direct GPIO; RST is XL9555, handled by board class)
-D HAS_TOUCHSCREEN=1
-D CST328_PIN_INT=12
-D CST328_PIN_RST=-1
-D ARDUINO_LOOP_STACK_SIZE=32768
-D HAS_MECK_FONTS
; Audio: ES8311 I2C codec (MAX). Enables the audio variant code paths and
; the native ES8311 init. 4G modem stays disabled until audio is solid.
-D MECK_AUDIO_VARIANT=1
-D HAS_ES8311_AUDIO=1
build_src_filter = ${esp32_base.build_src_filter}
; Include MAX variant (target.cpp + TDeckProMaxBoard.cpp)
+<../variants/lilygo_tdeck_max>
+<helpers/sensors/*.cpp>
; Vendored HynTouch CST328 drivers are C (enum |= is C-only) -- compile the
; .c files in ui-new (the base .cpp globs in each env do not match .c).
+<../examples/companion_radio/ui-new/*.c>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
zinggjm/GxEPD2@^1.5.9
adafruit/Adafruit GFX Library@^1.11.0
bitbank2/PNGdec@^1.0.1
lewisxhe/SensorLib@^0.2.0
https://github.com/sh123/esp32_codec2_arduino.git
WebServer
DNSServer
Update
; ===========================================================================
; Meck MAX builds — LoRa mesh works out of the box on all variants.
; 4G modem and ES8311 audio need adaptation before they can be enabled.
; ===========================================================================
; MAX + BLE companion (standard BLE phone bridging)
; Both 4G + audio hardware present but not yet enabled in firmware.
; BLE_PIN_CODE limit: MAX_CONTACTS=500 (BLE protocol ceiling).
[env:meck_max_ble]
extends = LilyGo_TDeck_Pro_Max
build_flags =
${LilyGo_TDeck_Pro_Max.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D OFFLINE_QUEUE_SIZE=256
-D MECK_WEB_READER=1
-D HAS_4G_MODEM=1
-D MECK_OTA_UPDATE=1
-D FIRMWARE_VERSION='"Meck v1.12.1.MAX"'
build_src_filter = ${LilyGo_TDeck_Pro_Max.build_src_filter}
+<helpers/esp32/*.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/GxEPDDisplay.cpp>
lib_deps =
${LilyGo_TDeck_Pro_Max.lib_deps}
densaugeo/base64 @ ~1.4.0
bitbank2/JPEGDEC
bitbank2/PNGdec
; MAX + WiFi companion (WiFi app bridging — no BLE, higher contact limit)
; WiFi credentials loaded from SD card (/web/wifi.cfg).
; Connect via MeshCore web app, meshcore.js, or Python CLI.
[env:meck_max_wifi]
extends = LilyGo_TDeck_Pro_Max
build_flags =
${LilyGo_TDeck_Pro_Max.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D MECK_WIFI_COMPANION=1
-D TCP_PORT=5000
-D WIFI_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
-D MECK_WEB_READER=1
-D MECK_OTA_UPDATE=1
-D HAS_4G_MODEM=1
-D FIRMWARE_VERSION='"Meck v1.12.1.MAX.WiFi"'
build_src_filter = ${LilyGo_TDeck_Pro_Max.build_src_filter}
+<helpers/esp32/*.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/GxEPDDisplay.cpp>
lib_deps =
${LilyGo_TDeck_Pro_Max.lib_deps}
densaugeo/base64 @ ~1.4.0
bitbank2/JPEGDEC
bitbank2/PNGdec
; MAX standalone (no BLE/WiFi — maximum battery life, LoRa mesh only)
; Contacts in PSRAM (2000 capacity). OTA enabled (WiFi AP on demand).
[env:meck_max_standalone]
extends = LilyGo_TDeck_Pro_Max
build_flags =
${LilyGo_TDeck_Pro_Max.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=2000
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=1
-D MECK_OTA_UPDATE=1
-D HAS_4G_MODEM=1
-D MECK_WEB_READER=1
-D FIRMWARE_VERSION='"Meck v1.12.1.MAX.SA"'
build_src_filter = ${LilyGo_TDeck_Pro_Max.build_src_filter}
+<helpers/esp32/*.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ui/GxEPDDisplay.cpp>
lib_deps =
${LilyGo_TDeck_Pro_Max.lib_deps}
densaugeo/base64 @ ~1.4.0
bitbank2/JPEGDEC
bitbank2/PNGdec
Reference in New Issue View Git Blame Copy Permalink