Refactor header files - includes should only declare, not define

include/LiLyGo.h

@@ -1,166 +0,0 @@
-
-// Define for our code
-#define RST_OLED UNUSED_PIN
-#define LED BOARD_LED
-
-#include "RadioLib.h"
-// make sure the power off button works when using RADIOLIB_OR_HALT
-// (See RadioLib_convenience.h)
-#define RADIOLIB_DO_DURING_HALT heltec_delay(10)
-#include "RadioLib_convenience.h"
-#ifdef HELTEC_NO_DISPLAY
-#define HELTEC_NO_DISPLAY_INSTANCE
-#else
-#define DISPLAY_WIDTH 128
-#define DISPLAY_HEIGHT 64
-// #include "OLEDDisplayUi.h"
-// #include "SH1106Wire.h"
-// #include "SSD1306Brzo.h"
-#include "SSD1306Wire.h"
-
-#endif
-#define ARDUINO_heltec_wifi_32_lora_V3
-#ifndef HELTEC_NO_RADIO_INSTANCE
-#ifndef ARDUINO_heltec_wifi_32_lora_V3
-// Assume MISO and MOSI being wrong when not using Heltec's board definition
-// and use hspi to make it work anyway. See heltec_setup() for the actual SPI setup.
-#include <SPI.h>
-SPIClass *hspi = new SPIClass(2);
-SX1262 radio = new Module(SS, DIO1, RST_LoRa, BUSY_LoRa, *hspi);
-#else // ARDUINO_heltec_wifi_32_lora_V3
-#ifdef USING_SX1280PA
-SX1280 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
-#endif // end USING_SX1280PA
-#ifdef USING_SX1262
-// Default SPI on pins from pins_arduino.h
-SX1262 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
-#endif // end USING_SX1262
-#ifdef USING_LR1121
-// Default SPI on pins from pins_arduino.h
-LR1121 radio = new Module(RADIO_CS_PIN, RADIO_DIO9_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
-#endif // end USING_LR1121
-#ifdef USING_SX1276
-// Default SPI on pins from pins_arduino.h
-SX1276 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
-#endif // end USING_SX1276
-#endif // end ARDUINO_heltec_wifi_32_lora_V3
-#endif // end HELTEC_NO_RADIO_INSTANCE
-
-void heltec_led(int led) {}
-
-void heltec_deep_sleep() {}
-
-void heltec_delay(int millisec) { delay(millisec); }
-
-#ifndef HELTEC_NO_DISPLAY_INSTANCE
-/**
- * @class PrintSplitter
- * @brief A class that splits the output of the Print class to two different
- *        Print objects.
- *
- * The PrintSplitter class is used to split the output of the Print class to two
- * different Print objects. It overrides the write() function to write the data
- * to both Print objects.
- */
-class PrintSplitter : public Print
-{
-  public:
-    PrintSplitter(Print &_a, Print &_b) : a(_a), b(_b) {}
-    size_t write(uint8_t c)
-    {
-        a.write(c);
-        return b.write(c);
-    }
-    size_t write(const char *str)
-    {
-        a.write(str);
-        return b.write(str);
-    }
-
-  private:
-    Print &a;
-    Print &b;
-};
-
-#ifdef HELTEC_WIRELESS_STICK
-#define DISPLAY_GEOMETRY GEOMETRY_64_32
-#else
-#define DISPLAY_GEOMETRY GEOMETRY_128_64
-#endif
-#define SCREEN_ADDRESS 0x3C
-
-SSD1306Wire display(SCREEN_ADDRESS, I2C_SDA, I2C_SCL, DISPLAY_GEOMETRY);
-// SH1106Wire display(0x3c, I2C_SDA, I2C_SCL, DISPLAY_GEOMETRY);
-PrintSplitter both(Serial, display);
-#else
-Print &both = Serial;
-#endif
-// some fake pin
-#ifdef T3_V1_6_SX1276
-#define BUTTON_PIN 22
-#endif
-#define BUTTON BUTTON_PIN
-#include "HotButton.h"
-HotButton button(BUTTON);
-
-void heltec_loop()
-{
-#ifndef DT3_V1_6_SX1276
-    button.update();
-#endif
-}
-
-// This file contains a binary patch for the SX1262
-#include "modules/SX126x/patches/SX126x_patch_scan.h"
-
-void heltec_display_power(bool on)
-{
-#ifndef HELTEC_NO_DISPLAY_INSTANCE
-    if (on)
-    {
-#ifdef HELTEC_WIRELESS_STICK
-        // They hooked the display to "external" power, and didn't tell anyone
-        heltec_ve(true);
-        delay(5);
-#endif
-        pinMode(RST_OLED, OUTPUT);
-        digitalWrite(RST_OLED, HIGH);
-        delay(1);
-        digitalWrite(RST_OLED, LOW);
-        delay(20);
-        digitalWrite(RST_OLED, HIGH);
-    }
-    else
-    {
-#ifdef HELTEC_WIRELESS_STICK
-        heltec_ve(false);
-#else
-        display.displayOff();
-#endif
-    }
-#endif
-}
-void heltec_setup()
-{
-    Serial.begin(115200);
-    Serial.println("LILYGO BOARD");
-
-#if defined(ARDUINO_ARCH_ESP32)
-    SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
-#elif defined(ARDUINO_ARCH_STM32)
-    SPI.setMISO(RADIO_MISO_PIN);
-    SPI.setMOSI(RADIO_MOSI_PIN);
-    SPI.setSCLK(RADIO_SCLK_PIN);
-    SPI.begin();
-#endif
-
-#ifndef ARDUINO_heltec_wifi_32_lora_V3
-    hspi->begin(SCK, MISO, MOSI, SS);
-#endif
-#ifndef HELTEC_NO_DISPLAY_INSTANCE
-    heltec_display_power(true);
-    display.init();
-    // display.setContrast(200);
-    display.flipScreenVertically();
-#endif
-}