Delete manual/LoRa_APRS_iGate_CA2RXU_Firmware_Manual.pdf

README.md

@@ -32,7 +32,7 @@ ____________________________________________________
 
 - T-Deck Plus (and also regular T-Deck with/without GPS).
 
-- HELTEC V2, V3, V3.2, T114, Wireless Stick, Wireless Stick Lite, HT-CT62, Wireless Tracker, Wireless Paper.
+- HELTEC V2, V3, V3.2, T114, Wireless Stick, Wireless Stick Lite V3/V3.2, HT-CT62, Wireless Tracker, Wireless Paper.
 
 - RAK Wireless 4631 + 19007(or 19003)
 
@@ -51,9 +51,12 @@ ____________________________________________________
 <br />
 
 # Timeline (Versions):
-
+- 2025-10-15 APRS Bridge for TNC added.
+- 2025-10-13 Rx and Tx Frequencies are now with fully configurable.
+- 2025-10-13 Startup Delay to allow the Router/Modem to start WiFiAP before connecting.
+- 2025-10-12 Choose to send Beacon on Rx or Tx frequency.
 - 2025-10-11 User defined NTP server and send beacon over MQTT added.
-- 2025-10-10 Changed Wiki into a pdf manual.
+- 2025-10-10 Converted the Wiki into a PDF manual.
 - 2025-09-26 Heltec Wireless Bridge support added.
 - 2025-09-09 MQTT added (pub+sub), Status defined by Op now and many fixes more.
 - 2025-06-20 Digipeaters now with updated EcoMode (Board Sleeps until packet Rx reducing current consumption to almost 10% at idle).

data/igate_conf.json

@@ -17,6 +17,7 @@
         "path": "WIDE1-1",
         "sendViaAPRSIS": false,
         "sendViaRF": false,
+        "beaconFreq": 1,
         "statusActive": false,
         "statusPacket": "",
         "gpsActive": false,
@@ -35,18 +36,20 @@
     "blacklist": "",
     "digi": {
         "mode": 0,
-        "ecoMode": 0,
+        "ecoMode": 0
-        "beaconOnRxFreq": false
     },
     "lora": {
-        "txFreq": 433775000,
+        "rxActive": true,
         "rxFreq": 433775000,
-        "spreadingFactor": 12,
+        "rxSpreadingFactor": 12,
-        "signalBandwidth": 125000,
+        "rxCodingRate4": 5,
-        "codingRate4": 5,
+        "rxSignalBandwidth": 125000,
-        "power": 20,
         "txActive": false,
-        "rxActive": true
+        "txFreq": 433775000,
+        "txSpreadingFactor": 12,
+        "txCodingRate4": 5,
+        "txSignalBandwidth": 125000,
+        "power": 20
     },
     "display": {
         "alwaysOn": true,
@@ -79,7 +82,8 @@
     "tnc": {
         "enableServer": false,
         "enableSerial": false,
-        "acceptOwn": false
+        "acceptOwn": false,
+        "aprsBrigdeActive": false
     },
     "mqtt": {
         "active": false,

data_embed/script.js

@@ -119,7 +119,11 @@ function loadSettings(settings) {
     document.getElementById("beacon.interval").value                    = settings.beacon.interval;
     document.getElementById("other.rememberStationTime").value          = settings.other.rememberStationTime;   
     document.getElementById("beacon.sendViaAPRSIS").checked             = settings.beacon.sendViaAPRSIS;
+
     document.getElementById("beacon.sendViaRF").checked                 = settings.beacon.sendViaRF;
+    document.getElementById("beacon.beaconFreq").value                  = settings.beacon.beaconFreq;
+    BeaconingViaRFCheckbox.checked  = settings.beacon.sendViaRF;
+    BeaconingFrequency.disabled     = !BeaconingViaRFCheckbox.checked;
 
     document.getElementById("beacon.statusActive").checked              = settings.beacon.statusActive;
     document.getElementById("beacon.statusPacket").value                = settings.beacon.statusPacket;
@@ -135,16 +139,18 @@ function loadSettings(settings) {
     // Digi
     document.getElementById("digi.mode").value                          = settings.digi.mode;
     document.getElementById("digi.ecoMode").value                       = settings.digi.ecoMode;
-    document.getElementById("digi.beaconOnRxFreq").value                = settings.digi.beaconOnRxFreq;
 
     // LoRa
-    document.getElementById("lora.txFreq").value                        = settings.lora.txFreq;
-    document.getElementById("lora.rxFreq").value                        = settings.lora.rxFreq;
-    document.getElementById("lora.txActive").checked                    = settings.lora.txActive;
     document.getElementById("lora.rxActive").checked                    = settings.lora.rxActive;
-    document.getElementById("lora.spreadingFactor").value               = settings.lora.spreadingFactor;
+    document.getElementById("lora.rxFreq").value                        = settings.lora.rxFreq;
-    document.getElementById("lora.signalBandwidth").value               = settings.lora.signalBandwidth;
+    document.getElementById("lora.rxSpreadingFactor").value             = settings.lora.rxSpreadingFactor;
-    document.getElementById("lora.codingRate4").value                   = settings.lora.codingRate4;
+    document.getElementById("lora.rxCodingRate4").value                 = settings.lora.rxCodingRate4;
+    document.getElementById("lora.rxSignalBandwidth").value             = settings.lora.rxSignalBandwidth;
+    document.getElementById("lora.txActive").checked                    = settings.lora.txActive;
+    document.getElementById("lora.txFreq").value                        = settings.lora.txFreq;
+    document.getElementById("lora.txSpreadingFactor").value             = settings.lora.txSpreadingFactor;
+    document.getElementById("lora.txCodingRate4").value                 = settings.lora.txCodingRate4;
+    document.getElementById("lora.txSignalBandwidth").value             = settings.lora.txSignalBandwidth;    
     document.getElementById("lora.power").value                         = settings.lora.power;
 
     // Display
@@ -200,6 +206,7 @@ function loadSettings(settings) {
         document.getElementById("tnc.enableServer").checked             = settings.tnc.enableServer;
         document.getElementById("tnc.enableSerial").checked             = settings.tnc.enableSerial;
         document.getElementById("tnc.acceptOwn").checked                = settings.tnc.acceptOwn;
+        document.getElementById("tnc.aprsBridgeActive").checked         = settings.tnc.aprsBridgeActive;
     }
 
     // MQTT
@@ -209,7 +216,7 @@ function loadSettings(settings) {
     document.getElementById("mqtt.username").value                      = settings.mqtt.username;
     document.getElementById("mqtt.password").value                      = settings.mqtt.password;
     document.getElementById("mqtt.port").value                          = settings.mqtt.port;
-    document.getElementById("mqtt.beaconOverMqtt").value                = settings.mqtt.beaconOverMqtt;
+    document.getElementById("mqtt.beaconOverMqtt").checked              = settings.mqtt.beaconOverMqtt;
     MqttCheckbox.checked        = settings.mqtt.active;
     MqttServer.disabled         = !MqttCheckbox.check;
     MqttTopic.disabled          = !MqttCheckbox.check;
@@ -252,7 +259,6 @@ function loadSettings(settings) {
     document.getElementById("other.backupDigiMode").checked             = settings.other.backupDigiMode;
 
     updateImage();
-    refreshSpeedStandard();
 }
 
 function showToast(message) {
@@ -304,6 +310,12 @@ function updateImage() {
     }
 }
 
+// Beaconing Switches
+const BeaconingViaRFCheckbox    = document.querySelector('input[name="beacon.sendViaRF"]');
+const BeaconingFrequency        = document.querySelector('select[name="beacon.beaconFreq"]');
+BeaconingViaRFCheckbox.addEventListener("change", function() {
+    BeaconingFrequency.disabled = !this.checked;
+});
 
 // Status Switch
 const StatusCheckbox            = document.querySelector('input[name="beacon.statusActive"]');
@@ -458,65 +470,6 @@ document
         updateImage();
     });
 
-const speedStandards = {
-    300: [125, 5, 12],
-    244: [125, 6, 12],
-    209: [125, 7, 12],
-    183: [125, 8, 12],
-    610: [125, 8, 10],
-    1200: [125, 7, 9],
-};
-
-function refreshSpeedStandard() {
-    const bw = Number(document.getElementById("lora.signalBandwidth").value);
-    const cr4 = Number(document.getElementById("lora.codingRate4").value);
-    const sf = Number(document.getElementById("lora.spreadingFactor").value);
-
-    let found = false;
-
-    for (const speed in speedStandards) {
-        const standard = speedStandards[speed];
-
-        if (standard[0] !== bw / 1000) continue;
-        if (standard[1] !== cr4) continue;
-        if (standard[2] !== sf) continue;
-
-        document.getElementById("action.speed").value = speed;
-        found = true;
-
-        break;
-    }
-
-    if (!found) {
-        document.getElementById("action.speed").value = "";
-    }
-}
-
-document
-    .getElementById("lora.signalBandwidth")
-    .addEventListener("focusout", refreshSpeedStandard);
-document
-    .getElementById("lora.codingRate4")
-    .addEventListener("focusout", refreshSpeedStandard);
-document
-    .getElementById("lora.spreadingFactor")
-    .addEventListener("focusout", refreshSpeedStandard);
-
-document.getElementById("action.speed").addEventListener("change", function () {
-    const speed = document.getElementById("action.speed").value;
-
-    if (speed !== "") {
-        const value = speedStandards[Number(speed)];
-
-        const bw = value[0];
-        const cr4 = value[1];
-        const sf = value[2];
-
-        document.getElementById("lora.signalBandwidth").value = bw * 1000;
-        document.getElementById("lora.codingRate4").value = cr4;
-        document.getElementById("lora.spreadingFactor").value = sf;
-    }
-});
 
 const form = document.querySelector("form");
 

include/configuration.h

@@ -45,12 +45,13 @@ public:
     String  overlay;
     String  symbol;
     String  path;    
-    bool    sendViaRF;
     bool    sendViaAPRSIS;
-    bool    gpsActive;
+    bool    sendViaRF;
-    bool    gpsAmbiguity;
+    int     beaconFreq;
     bool    statusActive;
     String  statusPacket;
+    bool    gpsActive;
+    bool    gpsAmbiguity;    
 };
 
 class APRS_IS {
@@ -67,19 +68,21 @@ public:
 class DIGI {
 public:
     int     mode;
-    int     ecoMode;        // 0 = Not Active | 1 = Ultra EcoMode | 2 = Not Active (WiFi OFF, Serial ON)
+    int     ecoMode;        // 0 = Not Active | 1 = Ultra EcoMode | 2 = Not Active (WiFi OFF, Serial ON)  
-    bool    beaconOnRxFreq;
 };
 
 class LoraModule {
 public:
-    long    txFreq;
-    long    rxFreq;
-    bool    txActive;
     bool    rxActive;
-    int     spreadingFactor;
+    long    rxFreq;
-    long    signalBandwidth;
+    int     rxSpreadingFactor;
-    int     codingRate4;
+    int     rxCodingRate4;
+    long    rxSignalBandwidth;    
+    bool    txActive;
+    long    txFreq;
+    int     txSpreadingFactor;
+    int     txCodingRate4;
+    long    txSignalBandwidth;
     int     power;
 };
 
@@ -124,6 +127,7 @@ public:
     bool    enableServer;
     bool    enableSerial;
     bool    acceptOwn;
+    bool    aprsBridgeActive;
 };
 
 class OTA {

include/tnc_utils.h

@@ -27,8 +27,8 @@ namespace TNC_Utils {
     void setup();
     void loop();
 
-    void sendToClients(const String& packet);
+    void sendToClients(const String& packet, bool stripBytes = false);
-    void sendToSerial(const String& packet);
+    void sendToSerial(const String& packet, bool stripBytes = false);
 
 }
 

src/LoRa_APRS_iGate.cpp

@@ -33,7 +33,7 @@
                 ╚═╝ ╚═════╝ ╚═╝  ╚═╝   ╚═╝   ╚══════╝
 
 
-                       Ricardo Guzman - CA2RXU 
+                       Ricardo Guzman - CA2RXU
            https://github.com/richonguzman/LoRa_APRS_iGate
              (donations : http://paypal.me/richonguzman)
 ___________________________________________________________________*/
@@ -67,8 +67,8 @@ ___________________________________________________________________*/
 #endif
 
 
-String              versionDate             = "2025-10-12";
+String              versionDate             = "2025-10-21";
-String              versionNumber           = "3.1.3";
+String              versionNumber           = "3.1.4";
 Configuration       Config;
 WiFiClient          aprsIsClient;
 WiFiClient          mqttClient;
@@ -192,9 +192,9 @@ void loop() {
                 DIGI_Utils::processLoRaPacket(packet); // Send received packet to Digi
             }
 
-            if (Config.tnc.enableServer) TNC_Utils::sendToClients(packet);  // Send received packet to TNC KISS
+            if (Config.tnc.enableServer) TNC_Utils::sendToClients(packet, true);    // Send received packet to TNC KISS
-            if (Config.tnc.enableSerial) TNC_Utils::sendToSerial(packet);   // Send received packet to Serial KISS
+            if (Config.tnc.enableSerial) TNC_Utils::sendToSerial(packet, true);     // Send received packet to Serial KISS
-            if (Config.mqtt.active) MQTT_Utils::sendToMqtt(packet);         // Send received packet to MQTT
+            if (Config.mqtt.active) MQTT_Utils::sendToMqtt(packet);                 // Send received packet to MQTT
         }
 
         if (Config.aprs_is.active) APRS_IS_Utils::listenAPRSIS();           // listen received packet from APRSIS

src/aprs_is_utils.cpp

@@ -25,6 +25,7 @@
 #include "query_utils.h"
 #include "A7670_utils.h"
 #include "digi_utils.h"
+#include "tnc_utils.h"
 #include "display.h"
 #include "utils.h"
 
@@ -367,6 +368,10 @@ namespace APRS_IS_Utils {
                     Serial.println(" ---> Rejected (Time): No Tx");
                 }
             }
+            if (Config.tnc.aprsBridgeActive) {
+                if (Config.tnc.enableServer) TNC_Utils::sendToClients(packet);  // Send received packet to TNC KISS
+                if (Config.tnc.enableSerial) TNC_Utils::sendToSerial(packet);   // Send received packet to Serial KISS
+            }
         }
     }
 

src/configuration.cpp

@@ -68,9 +68,11 @@ bool Configuration::writeFile() {
         data["beacon"]["longitude"]                 = beacon.longitude;
         data["beacon"]["overlay"]                   = beacon.overlay;
         data["beacon"]["symbol"]                    = beacon.symbol;
+        data["beacon"]["path"]                      = beacon.path;
+
         data["beacon"]["sendViaAPRSIS"]             = beacon.sendViaAPRSIS;
         data["beacon"]["sendViaRF"]                 = beacon.sendViaRF;
-        data["beacon"]["path"]                      = beacon.path;
+        data["beacon"]["beaconFreq"]                = beacon.beaconFreq;
 
         data["beacon"]["statusActive"]              = beacon.statusActive;
         data["beacon"]["statusPacket"]              = beacon.statusPacket;
@@ -87,16 +89,18 @@ bool Configuration::writeFile() {
         #if defined(HAS_A7670)
             if (digi.ecoMode == 1) data["digi"]["ecoMode"] = 2;
         #endif
-        data["digi"]["beaconOnRxFreq"]              = digi.beaconOnRxFreq;
 
-        data["lora"]["rxFreq"]                      = loramodule.rxFreq;
-        data["lora"]["txFreq"]                      = loramodule.txFreq;
-        data["lora"]["spreadingFactor"]             = loramodule.spreadingFactor;
-        data["lora"]["signalBandwidth"]             = loramodule.signalBandwidth;
-        data["lora"]["codingRate4"]                 = loramodule.codingRate4;
-        data["lora"]["power"]                       = loramodule.power;
-        data["lora"]["txActive"]                    = loramodule.txActive;
         data["lora"]["rxActive"]                    = loramodule.rxActive;
+        data["lora"]["rxFreq"]                      = loramodule.rxFreq;
+        data["lora"]["rxSpreadingFactor"]           = loramodule.rxSpreadingFactor;
+        data["lora"]["rxCodingRate4"]               = loramodule.rxCodingRate4;
+        data["lora"]["rxSignalBandwidth"]           = loramodule.rxSignalBandwidth;
+        data["lora"]["txActive"]                    = loramodule.txActive;      
+        data["lora"]["txFreq"]                      = loramodule.txFreq;
+        data["lora"]["txSpreadingFactor"]           = loramodule.txSpreadingFactor;
+        data["lora"]["txCodingRate4"]               = loramodule.txCodingRate4;
+        data["lora"]["txSignalBandwidth"]           = loramodule.txSignalBandwidth;        
+        data["lora"]["power"]                       = loramodule.power;        
 
         data["display"]["alwaysOn"]                 = display.alwaysOn;
         data["display"]["timeout"]                  = display.timeout;
@@ -127,6 +131,7 @@ bool Configuration::writeFile() {
         data["tnc"]["enableServer"]                 = tnc.enableServer;
         data["tnc"]["enableSerial"]                 = tnc.enableSerial;
         data["tnc"]["acceptOwn"]                    = tnc.acceptOwn;
+        data["tnc"]["aprsBridgeActive"]             = tnc.aprsBridgeActive;
 
         data["mqtt"]["active"]                      = mqtt.active;
         data["mqtt"]["server"]                      = mqtt.server;
@@ -223,6 +228,7 @@ bool Configuration::readFile() {
             !data["beacon"].containsKey("path") ||
             !data["beacon"].containsKey("sendViaAPRSIS") ||
             !data["beacon"].containsKey("sendViaRF") ||
+            !data["beacon"].containsKey("beaconFreq") ||
             !data["beacon"].containsKey("statusActive") ||
             !data["beacon"].containsKey("statusPacket") ||
             !data["beacon"].containsKey("gpsActive") ||
@@ -236,6 +242,7 @@ bool Configuration::readFile() {
         beacon.path                     = data["beacon"]["path"] | "WIDE1-1";
         beacon.sendViaAPRSIS            = data["beacon"]["sendViaAPRSIS"] | false;
         beacon.sendViaRF                = data["beacon"]["sendViaRF"] | false;
+        beacon.beaconFreq               = data["beacon"]["beaconFreq"] | 1;
         beacon.statusActive             = data["beacon"]["statusActive"] | false;
         beacon.statusPacket             = data["beacon"]["statusPacket"] | "";
         beacon.gpsActive                = data["beacon"]["gpsActive"] | false;
@@ -248,34 +255,37 @@ bool Configuration::readFile() {
         blacklist                       = data["blacklist"] | "station callsign";
 
         if (!data["digi"].containsKey("mode") ||
-            !data["digi"].containsKey("ecoMode") ||
+            !data["digi"].containsKey("ecoMode")) needsRewrite = true;
-            !data["digi"].containsKey("beaconOnRxFreq")) needsRewrite = true;
         digi.mode                       = data["digi"]["mode"] | 0;
         digi.ecoMode                    = data["digi"]["ecoMode"] | 0;
         if (digi.ecoMode == 1) shouldSleepStop = false;
-        digi.beaconOnRxFreq             = data["digi"]["beaconOnRxFreq"] | false;
-
         #if defined(HAS_A7670)
             if (digi.ecoMode == 1) digi.ecoMode = 2;
         #endif
 
-        if (!data["lora"].containsKey("txFreq") ||
+        if (!data["lora"].containsKey("rxActive") ||
             !data["lora"].containsKey("rxFreq") ||
-            !data["lora"].containsKey("spreadingFactor") ||
+            !data["lora"].containsKey("rxSpreadingFactor") ||
-            !data["lora"].containsKey("signalBandwidth") ||
+            !data["lora"].containsKey("rxCodingRate4") ||
-            !data["lora"].containsKey("codingRate4") ||
+            !data["lora"].containsKey("rxSignalBandwidth") ||
-            !data["lora"].containsKey("power") ||
             !data["lora"].containsKey("txActive") ||
-            !data["lora"].containsKey("rxActive")) needsRewrite = true;
+            !data["lora"].containsKey("txFreq") ||
-        loramodule.txFreq               = data["lora"]["txFreq"] | 433775000;
+            !data["lora"].containsKey("txSpreadingFactor") ||
+            !data["lora"].containsKey("txCodingRate4") ||
+            !data["lora"].containsKey("txSignalBandwidth") ||
+            !data["lora"].containsKey("power")) needsRewrite = true;
+        loramodule.rxActive             = data["lora"]["rxActive"] | true;
         loramodule.rxFreq               = data["lora"]["rxFreq"] | 433775000;
-        loramodule.spreadingFactor      = data["lora"]["spreadingFactor"] | 12;
+        loramodule.rxSpreadingFactor    = data["lora"]["rxSpreadingFactor"] | 12;
-        loramodule.signalBandwidth      = data["lora"]["signalBandwidth"] | 125000;
+        loramodule.rxCodingRate4        = data["lora"]["rxCodingRate4"] | 5;
-        loramodule.codingRate4          = data["lora"]["codingRate4"] | 5;
+        loramodule.rxSignalBandwidth    = data["lora"]["rxSignalBandwidth"] | 125000;        
-        loramodule.power                = data["lora"]["power"] | 20;
         loramodule.txActive             = data["lora"]["txActive"] | false;
-        loramodule.rxActive             = data["lora"]["rxActive"] | false;
+        loramodule.txFreq               = data["lora"]["txFreq"] | 433775000;
-
+        loramodule.txSpreadingFactor    = data["lora"]["txSpreadingFactor"] | 12;
+        loramodule.txCodingRate4        = data["lora"]["txCodingRate4"] | 5;
+        loramodule.txSignalBandwidth    = data["lora"]["txSignalBandwidth"] | 125000;
+        loramodule.power                = data["lora"]["power"] | 20;
+        
         if (!data["display"].containsKey("alwaysOn") ||
             !data["display"].containsKey("timeout") ||
             !data["display"].containsKey("turn180")) needsRewrite = true;
@@ -322,10 +332,12 @@ bool Configuration::readFile() {
 
         if (!data["tnc"].containsKey("enableServer") ||
             !data["tnc"].containsKey("enableSerial") ||
-            !data["tnc"].containsKey("acceptOwn")) needsRewrite = true;
+            !data["tnc"].containsKey("acceptOwn") ||
+            !data["tnc"].containsKey("aprsBridgeActive")) needsRewrite = true;
         tnc.enableServer                = data["tnc"]["enableServer"] | false;
         tnc.enableSerial                = data["tnc"]["enableSerial"] | false;
         tnc.acceptOwn                   = data["tnc"]["acceptOwn"] | false;
+        tnc.aprsBridgeActive            = data["tnc"]["aprsBridgeActive"] | false;
 
         if (!data["mqtt"].containsKey("active") ||
             !data["mqtt"].containsKey("server") ||
@@ -427,10 +439,12 @@ void Configuration::setDefaultValues() {
     beacon.interval                 = 15;
     beacon.overlay                  = "L";
     beacon.symbol                   = "a";
-    beacon.sendViaAPRSIS            = true;
-    beacon.sendViaRF                = false;
     beacon.path                     = "WIDE1-1";
 
+    beacon.sendViaAPRSIS            = true;
+    beacon.sendViaRF                = false;
+    beacon.beaconFreq               = 1;
+    
     beacon.statusActive             = false;
     beacon.statusPacket             = "";    
 
@@ -443,16 +457,18 @@ void Configuration::setDefaultValues() {
 
     digi.mode                       = 0;
     digi.ecoMode                    = 0;
-    digi.beaconOnRxFreq             = false;
 
-    loramodule.txFreq               = 433775000;
-    loramodule.rxFreq               = 433775000;
-    loramodule.spreadingFactor      = 12;
-    loramodule.signalBandwidth      = 125000;
-    loramodule.codingRate4          = 5;
-    loramodule.power                = 20;
-    loramodule.txActive             = false;
     loramodule.rxActive             = true;
+    loramodule.rxFreq               = 433775000;
+    loramodule.rxSpreadingFactor    = 12;
+    loramodule.rxCodingRate4        = 5;
+    loramodule.rxSignalBandwidth    = 125000;
+    loramodule.txActive             = false;
+    loramodule.txFreq               = 433775000;
+    loramodule.txSpreadingFactor    = 12;
+    loramodule.txCodingRate4        = 5;
+    loramodule.txSignalBandwidth    = 125000;
+    loramodule.power                = 20;
 
     display.alwaysOn                = true;
     display.timeout                 = 4;
@@ -483,6 +499,7 @@ void Configuration::setDefaultValues() {
     tnc.enableServer                = false;
     tnc.enableSerial                = false;
     tnc.acceptOwn                   = false;
+    tnc.aprsBridgeActive            = false;
 
     mqtt.active                     = false;
     mqtt.server                     = "";
@@ -512,7 +529,7 @@ void Configuration::setDefaultValues() {
 
     backupDigiMode                  = false;
 
-    Serial.println("All is Written!");
+    Serial.println("New Data Created... All is Written!");
 }
 
 Configuration::Configuration() {

src/display.cpp

@@ -96,6 +96,7 @@ void displaySetup() {
             #ifdef HAS_EPAPER
                 display.landscape();
                 display.printCenter("LoRa APRS iGate Initialising...");
+                if (Config.display.turn180) display.setRotation(2);
                 display.update();
             #else
                 #ifdef OLED_DISPLAY_HAS_RST_PIN

src/lora_utils.cpp

@@ -93,10 +93,10 @@ namespace LoRa_Utils {
         #if defined(HAS_SX1278) || defined(HAS_SX1276)
             radio.setDio0Action(setFlag, RISING);
         #endif
-        radio.setSpreadingFactor(Config.loramodule.spreadingFactor);
+        radio.setSpreadingFactor(Config.loramodule.rxSpreadingFactor);
-        float signalBandwidth = Config.loramodule.signalBandwidth/1000;
+        radio.setCodingRate(Config.loramodule.rxCodingRate4);
-        radio.setBandwidth(signalBandwidth);
+        float signalBandwidth = Config.loramodule.rxSignalBandwidth/1000;
-        radio.setCodingRate(Config.loramodule.codingRate4);
+        radio.setBandwidth(signalBandwidth);        
         radio.setCRC(true);
 
         #if (defined(RADIO_RXEN) && defined(RADIO_TXEN))    // QRP Labs LightGateway has 400M22S (SX1268)
@@ -129,22 +129,28 @@ namespace LoRa_Utils {
     }
 
     void changeFreqTx() {
-        delay(500);
+        delay(300);
         float freq = (float)Config.loramodule.txFreq / 1000000;
         radio.setFrequency(freq);
+        radio.setSpreadingFactor(Config.loramodule.txSpreadingFactor);
+        radio.setCodingRate(Config.loramodule.txCodingRate4);
+        radio.setBandwidth(Config.loramodule.txSignalBandwidth);
     }
 
     void changeFreqRx() {
-        delay(500);
+        delay(300);
         float freq = (float)Config.loramodule.rxFreq / 1000000;
         radio.setFrequency(freq);
+        radio.setSpreadingFactor(Config.loramodule.rxSpreadingFactor);
+        radio.setCodingRate(Config.loramodule.rxCodingRate4);
+        radio.setBandwidth(Config.loramodule.rxSignalBandwidth);
     }
 
     void sendNewPacket(const String& newPacket) {
         if (!Config.loramodule.txActive) return;
 
         if (Config.loramodule.txFreq != Config.loramodule.rxFreq) {
-            if (!packetIsBeacon || (packetIsBeacon && !Config.digi.beaconOnRxFreq)) {
+            if (!packetIsBeacon || (packetIsBeacon && Config.beacon.beaconFreq == 1)) {
                 changeFreqTx();
             }
         }
@@ -168,7 +174,7 @@ namespace LoRa_Utils {
             if (Config.digi.ecoMode != 1) digitalWrite(INTERNAL_LED_PIN, LOW);      // disabled in Ultra Eco Mode
         #endif
         if (Config.loramodule.txFreq != Config.loramodule.rxFreq) {
-            if (!packetIsBeacon || (packetIsBeacon && !Config.digi.beaconOnRxFreq)) {
+            if (!packetIsBeacon || (packetIsBeacon && Config.beacon.beaconFreq == 1)) {
                 changeFreqRx();
             }
         }

src/ntp_utils.cpp

@@ -27,7 +27,7 @@
 extern      Configuration  Config;
 
 WiFiUDP     ntpUDP;
-NTPClient   timeClient(ntpUDP, Config.ntp.server.c_str(), 0, 15 * 60 * 1000);  // Update interval 15 min
+NTPClient*  timeClient;
 
 
 namespace NTP_Utils {
@@ -35,17 +35,17 @@ namespace NTP_Utils {
     void setup() {
         if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0 && Config.callsign != "NOCALL-10") {
             int gmt = Config.ntp.gmtCorrection * 3600;
-            timeClient.setTimeOffset(gmt);
+            timeClient = new NTPClient(ntpUDP, Config.ntp.server.c_str(), gmt, 15 * 60 * 1000); // Update interval 15 min
-            timeClient.begin();
+            timeClient->begin();
         }
     }
 
     void update() {
-        if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0 && Config.callsign != "NOCALL-10") timeClient.update();
+        if (WiFi.status() == WL_CONNECTED && Config.digi.ecoMode == 0 && Config.callsign != "NOCALL-10") timeClient->update();
     }
 
     String getFormatedTime() {
-        if (Config.digi.ecoMode == 0) return timeClient.getFormattedTime();
+        if (Config.digi.ecoMode == 0) return timeClient->getFormattedTime();
         return "DigiEcoMode Active";
     }
 

src/tnc_utils.cpp

@@ -21,12 +21,15 @@
 #include "configuration.h"
 #include "station_utils.h"
 #include "kiss_protocol.h"
+#include "aprs_is_utils.h"
 #include "kiss_utils.h"
 #include "tnc_utils.h"
 #include "utils.h"
 
 
-extern Configuration        Config;
+extern Configuration    Config;
+extern WiFiClient       aprsIsClient;
+extern bool             passcodeValid;
 
 #define MAX_CLIENTS 4
 #define INPUT_BUFFER_SIZE (2 + MAX_CLIENTS)
@@ -94,7 +97,8 @@ namespace TNC_Utils {
                 String sender = frame.substring(0,frame.indexOf(">"));
 
                 if (Config.tnc.acceptOwn || sender != Config.callsign) {
-                    STATION_Utils::addToOutputPacketBuffer(frame);
+                    if (Config.loramodule.txActive) STATION_Utils::addToOutputPacketBuffer(frame);
+                    if (Config.tnc.aprsBridgeActive && Config.aprs_is.active && passcodeValid && aprsIsClient.connected()) APRS_IS_Utils::upload(frame);
                 } else {
                     Utils::println("Ignored own frame from KISS");
                 }
@@ -131,8 +135,8 @@ namespace TNC_Utils {
         }
     }
 
-    void sendToClients(const String& packet) {
+    void sendToClients(const String& packet, bool stripBytes) {
-        String cleanPacket = packet.substring(3);
+        String cleanPacket = stripBytes ? packet.substring(3): packet;
 
         const String kissEncoded = encodeKISS(cleanPacket);
 
@@ -152,8 +156,8 @@ namespace TNC_Utils {
         Utils::println(cleanPacket);
     }
 
-    void sendToSerial(const String& packet) {
+    void sendToSerial(const String& packet, bool stripBytes) {
-        String cleanPacket = packet.substring(3);
+        String cleanPacket = stripBytes ? packet.substring(3): packet;
         Serial.print(encodeKISS(cleanPacket));
         Serial.flush();
     }

src/utils.cpp

@@ -88,7 +88,7 @@ namespace Utils {
         if (statusAfterBoot && !Config.beacon.sendViaAPRSIS && Config.beacon.sendViaRF) {
             status.concat(":>");
             status.concat(Config.beacon.statusPacket);
-            STATION_Utils::addToOutputPacketBuffer(status);
+            STATION_Utils::addToOutputPacketBuffer(status, true);   // treated also as beacon on Tx Freq
             statusAfterBoot = false;
         }
     }
@@ -284,6 +284,7 @@ namespace Utils {
             Serial.println("Tx Freq less than 125kHz from Rx Freq ---> NOT VALID");
             displayShow("Tx Freq is less than ", "125kHz from Rx Freq", "device will autofix", "and then reboot", 1000);
             Config.loramodule.txFreq = Config.loramodule.rxFreq; // Inform about that but then change the TX QRG to RX QRG and reset the device
+            Config.beacon.beaconFreq = 1;   // return to LoRa Tx Beacon Freq
             Config.writeFile();
             ESP.restart();
         }

src/web_utils.cpp

@@ -177,6 +177,7 @@ namespace WEB_Utils {
         Config.beacon.interval              = getParamIntSafe("beacon.interval", Config.beacon.interval);
         Config.beacon.sendViaAPRSIS         = request->hasParam("beacon.sendViaAPRSIS", true);
         Config.beacon.sendViaRF             = request->hasParam("beacon.sendViaRF", true);
+        Config.beacon.beaconFreq            = getParamIntSafe("beacon.beaconFreq", Config.beacon.beaconFreq);
         Config.beacon.latitude              = getParamDoubleSafe("beacon.latitude", Config.beacon.latitude);
         Config.beacon.longitude             = getParamDoubleSafe("beacon.longitude", Config.beacon.longitude);
         Config.beacon.comment               = getParamStringSafe("beacon.comment", Config.beacon.comment);
@@ -198,16 +199,19 @@ namespace WEB_Utils {
 
         Config.digi.mode                    = getParamIntSafe("digi.mode", Config.digi.mode);
         Config.digi.ecoMode                 = getParamIntSafe("digi.ecoMode", Config.digi.ecoMode);
-        Config.digi.beaconOnRxFreq          = request->hasParam("digi.beaconOnRxFreq", true);
+        
 
-        Config.loramodule.txFreq            = getParamIntSafe("lora.txFreq", Config.loramodule.txFreq);
-        Config.loramodule.rxFreq            = getParamIntSafe("lora.rxFreq", Config.loramodule.rxFreq);
-        Config.loramodule.spreadingFactor   = getParamIntSafe("lora.spreadingFactor", Config.loramodule.spreadingFactor);
-        Config.loramodule.signalBandwidth   = getParamIntSafe("lora.signalBandwidth", Config.loramodule.signalBandwidth);
-        Config.loramodule.codingRate4       = getParamIntSafe("lora.codingRate4", Config.loramodule.codingRate4);
-        Config.loramodule.power             = getParamIntSafe("lora.power", Config.loramodule.power);
-        Config.loramodule.txActive          = request->hasParam("lora.txActive", true);
         Config.loramodule.rxActive          = request->hasParam("lora.rxActive", true);
+        Config.loramodule.rxFreq            = getParamIntSafe("lora.rxFreq", Config.loramodule.rxFreq);
+        Config.loramodule.rxSpreadingFactor = getParamIntSafe("lora.rxSpreadingFactor", Config.loramodule.rxSpreadingFactor);
+        Config.loramodule.rxCodingRate4     = getParamIntSafe("lora.rxCodingRate4", Config.loramodule.rxCodingRate4);
+        Config.loramodule.rxSignalBandwidth = getParamIntSafe("lora.rxSignalBandwidth", Config.loramodule.rxSignalBandwidth);
+        Config.loramodule.txActive          = request->hasParam("lora.txActive", true);
+        Config.loramodule.txFreq            = getParamIntSafe("lora.txFreq", Config.loramodule.txFreq);
+        Config.loramodule.txSpreadingFactor = getParamIntSafe("lora.txSpreadingFactor", Config.loramodule.txSpreadingFactor);
+        Config.loramodule.txCodingRate4     = getParamIntSafe("lora.txCodingRate4", Config.loramodule.txCodingRate4);
+        Config.loramodule.txSignalBandwidth = getParamIntSafe("lora.txSignalBandwidth", Config.loramodule.txSignalBandwidth);
+        Config.loramodule.power             = getParamIntSafe("lora.power", Config.loramodule.power);
 
 
         Config.display.alwaysOn             = request->hasParam("display.alwaysOn", true);
@@ -255,6 +259,7 @@ namespace WEB_Utils {
         Config.tnc.enableServer             = request->hasParam("tnc.enableServer", true);
         Config.tnc.enableSerial             = request->hasParam("tnc.enableSerial", true);
         Config.tnc.acceptOwn                = request->hasParam("tnc.acceptOwn", true);
+        Config.tnc.aprsBridgeActive         = request->hasParam("tnc.aprsBridgeActive", true);
 
 
         Config.mqtt.active                  = request->hasParam("mqtt.active", true);