update SENSOR BUS

src/battery_utils.cpp

@@ -105,9 +105,9 @@ namespace BATTERY_Utils {
     void getI2CVoltageSensorAddress() {
         uint8_t err, addr;
         for(addr = 1; addr < 0x7F; addr++) {
-            #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+            #ifdef SENSOR_I2C_BUS
-                Wire1.beginTransmission(addr);
+                SENSOR_I2C_BUS.beginTransmission(addr);
-                err = Wire1.endTransmission();
+                err = SENSOR_I2C_BUS.endTransmission();
             #else
                 Wire.beginTransmission(addr);
                 err = Wire.endTransmission();

src/power_utils.cpp

@@ -49,40 +49,23 @@ extern bool             stationCallsignIsValid;
 
 namespace POWER_Utils {
 
-    #ifdef VEXT_CTRL
+    #ifdef ADC_CTRL_PIN
-        void vext_ctrl_ON() {
-            #if VEXT_CTRL_INVERTED == 1
-                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? HIGH : LOW);
-            #else
-                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? LOW : HIGH);
-            #endif
-        }
-
-        void vext_ctrl_OFF() {
-            #if VEXT_CTRL_INVERTED == 1
-                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? LOW : HIGH);
-            #else
-                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? HIGH : LOW);
-            #endif
-        }
-    #endif
-
-
-    #ifdef ADC_CTRL
         void adc_ctrl_ON() {
-            #if ADC_CTRL_INVERTED == 1
+            digitalWrite(ADC_CTRL_PIN, ADC_CTRL_ON_STATE);
-                digitalWrite(ADC_CTRL, LOW);
-            #else
-                digitalWrite(ADC_CTRL, HIGH);
-            #endif
         }
 
         void adc_ctrl_OFF() {
-            #if ADC_CTRL_INVERTED == 1
+            digitalWrite(ADC_CTRL_PIN, !ADC_CTRL_ON_STATE);
-                digitalWrite(ADC_CTRL, HIGH);
+        }
-            #else
-                digitalWrite(ADC_CTRL, LOW);
     #endif
+
+    #ifdef VEXT_CTRL_PIN
+        void vext_ctrl_ON() {
+            digitalWrite(VEXT_CTRL_PIN, Config.digi.ecoMode == 1 ? !VEXT_CTRL_ON_STATE : VEXT_CTRL_ON_STATE);
+        }
+
+        void vext_ctrl_OFF() {
+            digitalWrite(VEXT_CTRL_PIN, Config.digi.ecoMode == 1 ? VEXT_CTRL_ON_STATE : !VEXT_CTRL_ON_STATE);
         }
     #endif
 
@@ -313,12 +296,8 @@ namespace POWER_Utils {
             Wire.begin(OLED_SDA, OLED_SCL);
         #endif
 
-        #ifdef USE_WIRE_WITH_BOARD_I2C_PINS
+        #ifdef SENSOR_I2C_BUS
-            Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
+            SENSOR_I2C_BUS.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
-        #endif
-
-        #ifdef USE_WIRE1_WITH_BOARD_I2C_PINS
-            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
         delay(1000);

src/wx_utils.cpp

@@ -61,9 +61,9 @@ namespace WX_Utils {
     void getWxModuleAddres() {
         uint8_t err, addr;
         for(addr = 1; addr < 0x7F; addr++) {
-            #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+            #ifdef SENSOR_I2C_BUS
-                Wire1.beginTransmission(addr);
+                SENSOR_I2C_BUS.beginTransmission(addr);
-                err = Wire1.endTransmission();
+                err = SENSOR_I2C_BUS.endTransmission();
             #else
                 Wire.beginTransmission(addr);
                 #ifdef LIGHTGATEWAY_PLUS_1_0

variants/WEMOS_S2_MINI_DIY_LoRa/board_pinout.h

@@ -31,7 +31,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_38
 
     //  I2C
-    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire
     #define BOARD_I2C_SDA           11
     #define BOARD_I2C_SCL           12
 

variants/XIAO_ESP32S3_WIO_SX1262/board_pinout.h

@@ -39,8 +39,8 @@
     #define INTERNAL_LED_PIN    48
 
     //  I2C
-    #define USE_WIRE_WITH_OLED_PINS
+    #define SENSOR_I2C_BUS      Wire
-    #define OLED_SDA            5
+    #define BOARD_I2C_SDA       5
-    #define OLED_SCL            6
+    #define BOARD_I2C_SCL       6
 
 #endif

variants/heltec-lora32-v2/board_pinout.h

@@ -48,7 +48,8 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        25
     #define BATTERY_PIN             37
-    #define ADC_CTRL                21
+
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_PIN            21
+    #define ADC_CTRL_ON_STATE       LOW
 
 #endif

variants/heltec-lora32-v2_915/board_pinout.h

@@ -48,7 +48,8 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        25
     #define BATTERY_PIN             37
+
     #define ADC_CTRL                21
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_ON_STATE       LOW
 
 #endif

variants/heltec_vision_master_e290/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           39
     #define BOARD_I2C_SCL           38
 
@@ -50,9 +50,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        45
     #define BATTERY_PIN             7
-    #define ADC_CTRL                46
+
-    #define ADC_CTRL_INVERTED       0
+    #define ADC_CTRL_PIN            46
-    #define VEXT_CTRL               18
+    #define ADC_CTRL_ON_STATE       HIGH
-    #define VEXT_CTRL_INVERTED      0
+    #define VEXT_CTRL_PIN           18
+    #define VEXT_CTRL_ON_STATE      HIGH
 
 #endif

variants/heltec_wifi_lora_32_V3/board_pinout.h

@@ -34,7 +34,7 @@
 
     //  I2C
     #define USE_WIRE_WITH_OLED_PINS
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42
 
@@ -53,9 +53,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define VEXT_CTRL               36
+
-    #define VEXT_CTRL_INVERTED      0
+    #define ADC_CTRL_PIN            37
-    #define ADC_CTRL                37
+    #define ADC_CTRL_ON_STATE       LOW
-    #define ADC_CTRL_INVERTED       1
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      HIGH
 
 #endif

variants/heltec_wifi_lora_32_V3_2/board_pinout.h

@@ -34,7 +34,7 @@
 
     //  I2C
     #define USE_WIRE_WITH_OLED_PINS
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42
 
@@ -53,9 +53,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define VEXT_CTRL               36
+
-    #define VEXT_CTRL_INVERTED      1
+    #define ADC_CTRL_PIN            37
-    #define ADC_CTRL                37
+    #define ADC_CTRL_ON_STATE       HIGH
-    #define ADC_CTRL_INVERTED       0
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      LOW
 
 #endif

variants/heltec_wifi_lora_32_V4/board_pinout.h

@@ -34,7 +34,7 @@
 
     //  I2C
     #define USE_WIRE_WITH_OLED_PINS
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42
 
@@ -53,10 +53,11 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define VEXT_CTRL               36
+
-    #define VEXT_CTRL_INVERTED      1
+    #define ADC_CTRL_PIN            37
-    #define ADC_CTRL                37
+    #define ADC_CTRL_ON_STATE       HIGH
-    #define ADC_CTRL_INVERTED       0
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      LOW
 
     //  GPS   ??
     #define VGNS_CTRL               34  // cambiar nombre para prender GPS ?

variants/heltec_wireless_paper_v1/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           37
     #define BOARD_I2C_SCL           36
 
@@ -50,9 +50,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        18
     #define BATTERY_PIN             20
-    #define ADC_CTRL                19
+
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_PIN            19
-    #define VEXT_CTRL               45
+    #define ADC_CTRL_ON_STATE       LOW
-    #define VEXT_CTRL_INVERTED      1
+    #define VEXT_CTRL_PIN           45
+    #define VEXT_CTRL_ON_STATE      LOW
 
 #endif

variants/heltec_wireless_paper_v1_2/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           37
     #define BOARD_I2C_SCL           36
 
@@ -50,9 +50,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        18
     #define BATTERY_PIN             20
-    #define ADC_CTRL                19
+
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_PIN            19
-    #define VEXT_CTRL               45
+    #define ADC_CTRL_ON_STATE       LOW
-    #define VEXT_CTRL_INVERTED      1
+    #define VEXT_CTRL_PIN           45
+    #define VEXT_CTRL_ON_STATE      LOW
 
 #endif

variants/heltec_wireless_stick/board_pinout.h

@@ -50,9 +50,11 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define ADC_CTRL                37
+
-    #define VEXT_CTRL               36
+    #define ADC_CTRL_PIN            37
-    #define VEXT_CTRL_INVERTED      1
+    #define ADC_CTRL_ON_STATE       LOW
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      LOW
 
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42

variants/heltec_wireless_stick_lite_v3/board_pinout.h

@@ -33,16 +33,17 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define ADC_CTRL                37
+
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_PIN            37
-    #define VEXT_CTRL               36
+    #define ADC_CTRL_ON_STATE       LOW
-    #define VEXT_CTRL_INVERTED      1
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      LOW
 
 #endif

variants/heltec_wireless_stick_lite_v3_display/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire1
     #define BOARD_I2C_SDA           41
     #define BOARD_I2C_SCL           42
 
@@ -44,9 +44,10 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
-    #define ADC_CTRL                37
+
-    #define ADC_CTRL_INVERTED       1
+    #define ADC_CTRL_PIN            37
-    #define VEXT_CTRL               36
+    #define ADC_CTRL_ON_STATE       LOW
-    #define VEXT_CTRL_INVERTED      1
+    #define VEXT_CTRL_PIN           36
+    #define VEXT_CTRL_ON_STATE      LOW
 
 #endif

variants/heltec_wireless_tracker/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
     //  I2C
-    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire
     #define BOARD_I2C_SDA           7
     #define BOARD_I2C_SCL           6
 
@@ -44,10 +44,11 @@
     //  Aditional Config
     #define INTERNAL_LED_PIN        18
     #define BATTERY_PIN             1
-    #define VEXT_CTRL               3   // To turn on GPS and TFT
+
-    #define VEXT_CTRL_INVERTED      0
+    #define ADC_CTRL_PIN            2   // HELTEC Wireless Tracker ADC_CTRL = HIGH powers the voltage divider to read BatteryPin. Only on V05 = V1.1
-    #define ADC_CTRL                2   // HELTEC Wireless Tracker ADC_CTRL = HIGH powers the voltage divider to read BatteryPin. Only on V05 = V1.1
+    #define ADC_CTRL_ON_STATE       HIGH
-    #define ADC_CTRL_INVERTED       0
+    #define VEXT_CTRL_PIN           3   // To turn on GPS and TFT
+    #define VEXT_CTRL_ON_STATE      HIGH
 
     //  GPS
     #define HAS_GPS

variants/ttgo_t_deck_GPS/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_45
 
     //  I2C
-    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire
     #define BOARD_I2C_SDA           18
     #define BOARD_I2C_SCL           8
 

variants/ttgo_t_deck_plus/board_pinout.h

@@ -33,7 +33,7 @@
     #define GPIO_WAKEUP_PIN         GPIO_SEL_45
 
     //  I2C
-    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define SENSOR_I2C_BUS          Wire
     #define BOARD_I2C_SDA           18
     #define BOARD_I2C_SCL           8