version Date update

src/LoRa_APRS_iGate.cpp

@@ -67,7 +67,7 @@ ___________________________________________________________________*/
 #endif
 
 
-String              versionDate             = "2025-09-02";
+String              versionDate             = "2025-09-09";
 String              versionNumber           = "3.1";
 Configuration       Config;
 WiFiClient          aprsIsClient;

src/power_utils.cpp

@@ -296,18 +296,6 @@ namespace POWER_Utils {
             adc_ctrl_OFF();
         #endif
 
-        #if defined(HELTEC_WIRELESS_TRACKER)
-            Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
-        #endif
-
-        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(LIGHTGATEWAY_PLUS_1_0) || defined(TTGO_LORA32_T3S3_V1_2) || defined(HELTEC_V2)
-            Wire.begin(OLED_SDA, OLED_SCL);
-        #endif
-
-        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WP_V1) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
-            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
-        #endif
-
         #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
             pinMode(BOARD_POWERON, OUTPUT);
             digitalWrite(BOARD_POWERON, HIGH);
@@ -321,9 +309,20 @@ namespace POWER_Utils {
             digitalWrite(TFT_CS, HIGH);
 
             delay(500);
+        #endif
+
+        #ifdef USE_WIRE_WITH_OLED_PINS
+            Wire.begin(OLED_SDA, OLED_SCL);
+        #endif
+
+        #ifdef USE_WIRE_WITH_BOARD_I2C_PINS
             Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
         #endif
 
+        #ifdef USE_WIRE1_WITH_BOARD_I2C_PINS
+            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
+        #endif
+        
         delay(1000);
         BATTERY_Utils::setup();
         BATTERY_Utils::startupBatteryHealth();

src/tnc_utils.cpp

@@ -17,10 +17,12 @@
  */
 
 #include <WiFi.h>
+#include "ESPmDNS.h"
 #include "configuration.h"
 #include "station_utils.h"
 #include "kiss_protocol.h"
 #include "kiss_utils.h"
+#include "tnc_utils.h"
 #include "utils.h"
 
 
@@ -45,6 +47,17 @@ namespace TNC_Utils {
         if (Config.tnc.enableServer && Config.digi.ecoMode == 0) {
             tncServer.stop();
             tncServer.begin();
+            String host = "igate-" + Config.callsign;
+            if (!MDNS.begin(host.c_str())) {
+                Serial.println("Error Starting mDNS");
+                tncServer.stop();
+                return;
+            }
+            if (!MDNS.addService("tnc", "tcp", TNC_PORT)) {
+                Serial.println("Error: Could not add mDNS service");
+            }
+            Serial.println("TNC server started successfully");
+            Serial.println("mDNS Host: " + host + ".local");
         }
     }
 

src/wx_utils.cpp

@@ -71,6 +71,7 @@ namespace WX_Utils {
                 #endif
                 err = Wire.endTransmission();
             #endif
+            delay(5);
             if (err == 0) {
                 //Serial.println(addr); //this shows any connected board to I2C
                 if (addr == 0x76 || addr == 0x77) { // BME or BMP

variants/ESP32_C3_OctopusLab_LoRa/board_pinout.h

@@ -32,6 +32,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_NUM_3
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_1W_LoRa/board_pinout.h

@@ -34,6 +34,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_1W_LoRa_915/board_pinout.h

@@ -34,8 +34,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
-    #define HAS_DISPLAY    
+    #define HAS_DISPLAY
 
     #undef  OLED_SDA
     #undef  OLED_SCL

variants/ESP32_DIY_1W_LoRa_LLCC68/board_pinout.h

@@ -34,6 +34,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
     

variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h

@@ -34,6 +34,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_LoRa/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_LoRa_915/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_LoRa_A7670/board_pinout.h

@@ -28,6 +28,9 @@
     #define RADIO_RST_PIN           0
     #define RADIO_BUSY_PIN          32
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ESP32_DIY_LoRa_A7670_915/board_pinout.h

@@ -28,6 +28,9 @@
     #define RADIO_RST_PIN           0
     #define RADIO_BUSY_PIN          32
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display    
     #define HAS_DISPLAY
 

variants/OE5HWN_MeshCom/board_pinout.h

@@ -34,6 +34,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/QRPLabs_LightGateway_1_0/board_pinout.h

@@ -34,6 +34,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_5
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/QRPLabs_LightGateway_Plus_1_0/board_pinout.h

@@ -35,6 +35,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_5
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/TROY_LoRa_APRS/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN    RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN     GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/WEMOS-D1-R32-RA02/board_pinout.h

@@ -31,6 +31,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_12
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/WEMOS-LOLIN32-OLED-DIY/board_pinout.h

@@ -30,7 +30,10 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_25
 
-    //  Display    
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
+    //  Display
     #define HAS_DISPLAY
 
     #undef  OLED_SDA

variants/WEMOS_S2_MINI_DIY_LoRa/board_pinout.h

@@ -30,6 +30,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_38
 
+    //  I2C
+    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           11
+    #define BOARD_I2C_SCL           12
+
     //  Aditional Config
     #define INTERNAL_LED_PIN        15
 

variants/XIAO_ESP32S3_WIO_SX1262/board_pinout.h

@@ -36,5 +36,10 @@
 
     #define BUTTON_PIN          21
     #define INTERNAL_LED_PIN    48
-    
+
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+    #define OLED_SDA            5
+    #define OLED_SCL            6
+
 #endif

variants/heltec-lora32-v2/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/heltec_wifi_lora_32_V3/board_pinout.h

@@ -31,6 +31,12 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
     //  Display
     #define HAS_DISPLAY
 
@@ -48,7 +54,5 @@
     #define BATTERY_PIN             1
     #define VEXT_CTRL               36
     #define ADC_CTRL                37
-    #define BOARD_I2C_SDA           41
-    #define BOARD_I2C_SCL           42
 
 #endif

variants/heltec_wifi_lora_32_V3_2/board_pinout.h

@@ -31,6 +31,12 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
     //  Display
     #define HAS_DISPLAY
 
@@ -48,7 +54,5 @@
     #define BATTERY_PIN             1
     #define VEXT_CTRL               36
     #define ADC_CTRL                37
-    #define BOARD_I2C_SDA           41
-    #define BOARD_I2C_SCL           42
 
 #endif

variants/heltec_wireless_paper_v1/board_pinout.h

@@ -31,6 +31,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           37
+    #define BOARD_I2C_SCL           36
+
     //  Display
     #define HAS_DISPLAY
     #define HAS_EPAPER
@@ -46,7 +51,5 @@
     #define BATTERY_PIN             20
     #define ADC_CTRL                19
     #define VEXT_CTRL               45
-    #define BOARD_I2C_SDA           37
-    #define BOARD_I2C_SCL           36
 
 #endif

variants/heltec_wireless_stick/board_pinout.h

@@ -31,6 +31,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/heltec_wireless_stick_lite_v3/board_pinout.h

@@ -31,12 +31,15 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
     //  Aditional Config
     #define INTERNAL_LED_PIN        35
     #define BATTERY_PIN             1
     #define VEXT_CTRL               36
     #define ADC_CTRL                37
-    #define BOARD_I2C_SDA           41
-    #define BOARD_I2C_SCL           42
 
 #endif

variants/heltec_wireless_stick_lite_v3_display/board_pinout.h

@@ -31,6 +31,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
 
+    //  I2C
+    #define USE_WIRE1_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           41
+    #define BOARD_I2C_SCL           42
+
     //  Display
     #define HAS_DISPLAY
     #define OLED_RST                -1      // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -40,7 +45,5 @@
     #define BATTERY_PIN             1
     #define VEXT_CTRL               36
     #define ADC_CTRL                37
-    #define BOARD_I2C_SDA           41
-    #define BOARD_I2C_SCL           42
 
 #endif

variants/heltec_wireless_tracker/board_pinout.h

@@ -30,6 +30,11 @@
     #define RADIO_BUSY_PIN          13      // SX1262 BUSY
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_14
+
+    //  I2C
+    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           7
+    #define BOARD_I2C_SCL           6
     
     //  Display
     #define HAS_DISPLAY
@@ -40,8 +45,6 @@
     #define BATTERY_PIN             1    
     #define ADC_CTRL                2   // HELTEC Wireless Tracker ADC_CTRL = HIGH powers the voltage divider to read BatteryPin. Only on V05 = V1.1
     #define VEXT_CTRL               3   // To turn on GPS and TFT
-    #define BOARD_I2C_SDA           7
-    #define BOARD_I2C_SCL           6
 
     //  GPS
     #define HAS_GPS

variants/ttgo-lora32-v21/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 
@@ -43,7 +46,7 @@
 
     //  Aditional Config
     #define INTERNAL_LED_PIN        25      // Green Led
-    #define BATTERY_PIN             35   
+    #define BATTERY_PIN             35
-	#define HAS_ADC_CALIBRATION    
+	#define HAS_ADC_CALIBRATION
 
 #endif

variants/ttgo-lora32-v21_915/board_pinout.h

@@ -30,6 +30,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_BUSY_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_26
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ttgo_lora32_t3s3_v1_2/board_pinout.h

@@ -31,6 +31,9 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_33
 
+    //  I2C
+    #define USE_WIRE_WITH_OLED_PINS
+
     //  Display
     #define HAS_DISPLAY
 

variants/ttgo_t_deck_GPS/board_pinout.h

@@ -31,6 +31,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_45
 
+    //  I2C
+    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           18
+    #define BOARD_I2C_SCL           8
+
     //  Display
     #define HAS_DISPLAY
     #define HAS_TFT
@@ -50,7 +55,4 @@
     #define BOARD_SDCARD_CS         39
     #define BOARD_BL_PIN            42
 
-    #define BOARD_I2C_SDA           18
-    #define BOARD_I2C_SCL           8
-
 #endif

variants/ttgo_t_deck_plus/board_pinout.h

@@ -31,6 +31,11 @@
     #define RADIO_WAKEUP_PIN        RADIO_DIO1_PIN
     #define GPIO_WAKEUP_PIN         GPIO_SEL_45
 
+    //  I2C
+    #define USE_WIRE_WITH_BOARD_I2C_PINS
+    #define BOARD_I2C_SDA           18
+    #define BOARD_I2C_SCL           8
+
     //  Display
     #define HAS_DISPLAY
     #define HAS_TFT
@@ -51,7 +56,4 @@
     #define BOARD_SDCARD_CS         39
     #define BOARD_BL_PIN            42
 
-    #define BOARD_I2C_SDA           18
-    #define BOARD_I2C_SCL           8
-
 #endif