encoded telemetry fix for INA219

README.md

@@ -51,7 +51,7 @@ ____________________________________________________
 <br />
 
 # Timeline (Versions):
-- 2025-12-01 APRSPacketLib updates, AHT20 sensor added.
+- 2025-12-01 APRSPacketLib updates, AHT20 sensor added, INA219 support added.
 - 2025-10-15 APRS Bridge for TNC added.
 - 2025-10-13 Rx and Tx Frequencies are now with fully configurable.
 - 2025-10-13 Startup Delay to allow the Router/Modem to start WiFiAP before connecting.

common_settings.ini

@@ -2,26 +2,25 @@
 build_flags =
 	-Werror -Wall
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
-	-DRADIOLIB_EXCLUDE_CC1101=1
+	-D RADIOLIB_EXCLUDE_CC1101=1
-	-DRADIOLIB_EXCLUDE_NRF24=1
+	-D RADIOLIB_EXCLUDE_RF69=1
-	-DRADIOLIB_EXCLUDE_RF69=1
+	-D RADIOLIB_EXCLUDE_RFM2X=1
-	-DRADIOLIB_EXCLUDE_SX1231=1
+	-D RADIOLIB_EXCLUDE_SX1231=1
-	-DRADIOLIB_EXCLUDE_SX1233=1
+	-D RADIOLIB_EXCLUDE_SX1233=1
-	-DRADIOLIB_EXCLUDE_SI443X=1
+	-D RADIOLIB_EXCLUDE_SI443X=1
-	-DRADIOLIB_EXCLUDE_RFM2X=1
+	-D RADIOLIB_EXCLUDE_NRF24=1
-	-DRADIOLIB_EXCLUDE_AFSK=1
+	-D RADIOLIB_EXCLUDE_AFSK=1
-	-DRADIOLIB_EXCLUDE_BELL=1
+	-D RADIOLIB_EXCLUDE_APRS=1
-	-DRADIOLIB_EXCLUDE_HELLSCHREIBER=1
+	-D RADIOLIB_EXCLUDE_AX25=1
-	-DRADIOLIB_EXCLUDE_MORSE=1
+	-D RADIOLIB_EXCLUDE_BELL=1
-	-DRADIOLIB_EXCLUDE_RTTY=1
+	-D RADIOLIB_EXCLUDE_FSK4=1
-	-DRADIOLIB_EXCLUDE_SSTV=1
+	-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-	-DRADIOLIB_EXCLUDE_AX25=1
+	-D RADIOLIB_EXCLUDE_LORAWAN=1
-	-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
+	-D RADIOLIB_EXCLUDE_MORSE=1
-	-DRADIOLIB_EXCLUDE_BELL=1
+	-D RADIOLIB_EXCLUDE_PAGER=1
-	-DRADIOLIB_EXCLUDE_PAGER=1
+	-D RADIOLIB_EXCLUDE_DIRECT_RECEIVE=1
-	-DRADIOLIB_EXCLUDE_FSK4=1
+	-D RADIOLIB_EXCLUDE_RTTY=1
-	-DRADIOLIB_EXCLUDE_APRS=1
+	-D RADIOLIB_EXCLUDE_SSTV=1
-	-DRADIOLIB_EXCLUDE_LORAWAN=1
 	-I variants/${PIOENV}
 lib_deps =
 	adafruit/Adafruit Unified Sensor @ 1.1.14
@@ -29,6 +28,7 @@ lib_deps =
 	adafruit/Adafruit BME280 Library @ 2.2.4
 	adafruit/Adafruit BMP280 Library @ 2.6.8
 	adafruit/Adafruit BME680 Library @ 2.0.4
+	adafruit/Adafruit INA219 @ 1.2.3
 	adafruit/Adafruit Si7021 Library @ 1.5.3
 	arduino-libraries/NTPClient @ 3.2.1
 	ayushsharma82/ElegantOTA @ 3.1.5

data/igate_conf.json

@@ -61,11 +61,12 @@
         "monitorInternalVoltage": false,
         "internalSleepVoltage": 2.9,
         "sendExternalVoltage": false,
-        "externalVoltagePin": 34,
         "monitorExternalVoltage": false,
         "externalSleepVoltage": 10.9,
+        "useExternalI2CSensor": false,
         "voltageDividerR1": 100.0,
         "voltageDividerR2": 27.0,
+        "externalVoltagePin": 34,
         "sendVoltageAsTelemetry": false
 	},
     "wxsensor": {

data_embed/index.html

@@ -1196,7 +1196,20 @@
                                                 >Send External Voltage</label
                                             >
                                         </div>
-                                        <div class="form-check form-switch mt-5">
+                                        <div class="form-check form-switch">
+                                            <input
+                                                type="checkbox"
+                                                name="battery.useExternalI2CSensor"
+                                                id="battery.useExternalI2CSensor"
+                                                class="form-check-input"
+                                            />
+                                            <label
+                                                for="battery.useExternalI2CSensor"
+                                                class="form-label"
+                                                >Use External I2C Voltage Sensor</label
+                                            >
+                                        </div>
+                                        <div class="form-check form-switch">
                                             <input
                                                 type="checkbox"
                                                 name="battery.monitorExternalVoltage"
@@ -2009,6 +2022,7 @@
                                             name="remoteManagement.managers"
                                             id="remoteManagement.managers"
                                             class="form-control"
+                                            oninput="this.value = this.value.toUpperCase();"
                                         />
                                     </div>
                                 </div>

data_embed/script.js

@@ -168,13 +168,16 @@ function loadSettings(settings) {
     MonitorInternalSleepVoltage.disabled    = !MonitorInternalVoltageCheckbox.checked;
 
     document.getElementById("battery.sendExternalVoltage").checked      = settings.battery.sendExternalVoltage;
+    document.getElementById("battery.useExternalI2CSensor").checked     = settings.battery.useExternalI2CSensor;
     document.getElementById("battery.externalVoltagePin").value         = settings.battery.externalVoltagePin;
     document.getElementById("battery.voltageDividerR1").value           = settings.battery.voltageDividerR1.toFixed(1);
     document.getElementById("battery.voltageDividerR2").value           = settings.battery.voltageDividerR2.toFixed(1);
     SendExternalVoltageCheckbox.checked     = settings.battery.sendExternalVoltage;
-    ExternalVoltagePin.disabled             = !SendExternalVoltageCheckbox.checked;
+    UseExternalI2CSensorCheckbox.disabled   = !SendExternalVoltageCheckbox.checked;
-    ExternalVoltageDividerR1.disabled       = !SendExternalVoltageCheckbox.checked;
+    ExternalVoltagePin.disabled             = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
-    ExternalVoltageDividerR2.disabled       = !SendExternalVoltageCheckbox.checked;
+    ExternalVoltageDividerR1.disabled       = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR2.disabled       = !SendExternalVoltageCheckbox.checked || UseExternalI2CSensorCheckbox.checked;
+
 
     document.getElementById("battery.monitorExternalVoltage").checked   = settings.battery.monitorExternalVoltage;
     document.getElementById("battery.externalSleepVoltage").value       = settings.battery.externalSleepVoltage.toFixed(1);
@@ -218,12 +221,12 @@ function loadSettings(settings) {
     document.getElementById("mqtt.port").value                          = settings.mqtt.port;
     document.getElementById("mqtt.beaconOverMqtt").checked              = settings.mqtt.beaconOverMqtt;
     MqttCheckbox.checked        = settings.mqtt.active;
-    MqttServer.disabled         = !MqttCheckbox.check;
+    MqttServer.disabled         = !MqttCheckbox.checked;
-    MqttTopic.disabled          = !MqttCheckbox.check;
+    MqttTopic.disabled          = !MqttCheckbox.checked;
-    MqttUsername.disabled       = !MqttCheckbox.check;
+    MqttUsername.disabled       = !MqttCheckbox.checked;
-    MqttPassword.disabled       = !MqttCheckbox.check;
+    MqttPassword.disabled       = !MqttCheckbox.checked;
-    MqttPort.disabled           = !MqttCheckbox.check;
+    MqttPort.disabled           = !MqttCheckbox.checked;
-    MqttBeaconOverMqtt.disabled = !MqttCheckbox.check;
+    MqttBeaconOverMqtt.disabled = !MqttCheckbox.checked;
 
     // Reboot
     document.getElementById("other.rebootMode").checked                 = settings.other.rebootMode;
@@ -360,13 +363,21 @@ MonitorExternalVoltageCheckbox.addEventListener("change", function () {
     MonitorExternalSleepVoltage.disabled    = !this.checked;
 });
 const SendExternalVoltageCheckbox           = document.querySelector('input[name="battery.sendExternalVoltage"]');
+const UseExternalI2CSensorCheckbox          = document.querySelector('input[name="battery.useExternalI2CSensor"]');
 const ExternalVoltagePin                    = document.querySelector('input[name="battery.externalVoltagePin"]');
 const ExternalVoltageDividerR1              = document.querySelector('input[name="battery.voltageDividerR1"]');
 const ExternalVoltageDividerR2              = document.querySelector('input[name="battery.voltageDividerR2"]');
 SendExternalVoltageCheckbox.addEventListener("change", function () {
-    ExternalVoltagePin.disabled             = !this.checked;
+    UseExternalI2CSensorCheckbox.disabled   = !this.checked;
-    ExternalVoltageDividerR1.disabled       = !this.checked;
+    ExternalVoltagePin.disabled             = !this.checked || UseExternalI2CSensorCheckbox.checked;
-    ExternalVoltageDividerR2.disabled       = !this.checked;
+    ExternalVoltageDividerR1.disabled       = !this.checked || UseExternalI2CSensorCheckbox.checked;
+    ExternalVoltageDividerR2.disabled       = !this.checked || UseExternalI2CSensorCheckbox.checked;
+});
+
+UseExternalI2CSensorCheckbox.addEventListener("change", function () {
+    ExternalVoltagePin.disabled             = this.checked;
+    ExternalVoltageDividerR1.disabled       = this.checked;
+    ExternalVoltageDividerR2.disabled       = this.checked;
 });
 
 // Telemetry Switches

include/configuration.h

@@ -102,6 +102,7 @@ public:
     int     externalVoltagePin;
     bool    monitorExternalVoltage;
     float   externalSleepVoltage;
+    bool    useExternalI2CSensor;
     float   voltageDividerR1;
     float   voltageDividerR2;
     bool    sendVoltageAsTelemetry;

src/battery_utils.cpp

@@ -16,7 +16,7 @@
  * along with LoRa APRS iGate. If not, see <https://www.gnu.org/licenses/>.
  */
 
-#include <Arduino.h>
+#include <Adafruit_INA219.h>
 #include "battery_utils.h"
 #include "configuration.h"
 #include "board_pinout.h"
@@ -37,6 +37,10 @@ float   multiplyCorrection              = 0.035;
 
 float   voltageDividerTransformation    = 0.0;
 
+uint8_t externalI2CSensorAddress        = 0x00;
+int     externalI2CSensorType           = 0; // 0 = None | 1 = INA219
+
+Adafruit_INA219     ina219;
 
 
 #ifdef HAS_ADC_CALIBRATION
@@ -98,6 +102,30 @@ namespace BATTERY_Utils {
         #endif
     }
 
+    void getI2CVoltageSensorAddress() {
+        uint8_t err, addr;
+        for(addr = 1; addr < 0x7F; addr++) {
+            #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
+                Wire1.beginTransmission(addr);
+                err = Wire1.endTransmission();
+            #else
+                Wire.beginTransmission(addr);
+                err = Wire.endTransmission();
+            #endif
+            delay(5);
+            if (err == 0) {
+                if (addr == 0x40) { // INA219
+                    externalI2CSensorAddress = addr;
+                }
+            }
+        }
+    }
+
+    bool detectINA219(uint8_t addr) {
+        ina219 = Adafruit_INA219(addr);
+        return ina219.begin();
+    }
+
     void setup() {
         if ((Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) && Config.battery.voltageDividerR2 != 0) voltageDividerTransformation = (Config.battery.voltageDividerR1 + Config.battery.voltageDividerR2) / Config.battery.voltageDividerR2;
 
@@ -107,6 +135,14 @@ namespace BATTERY_Utils {
                 adcCalibration();
             }
         #endif
+
+        getI2CVoltageSensorAddress();
+        if (externalI2CSensorAddress != 0x00) {
+            if (detectINA219(externalI2CSensorAddress)) {
+                Serial.println("INA219 sensor found");
+                externalI2CSensorType = 1;  // INA219
+            }
+        }
     }
 
     float checkInternalVoltage() { 
@@ -177,37 +213,49 @@ namespace BATTERY_Utils {
     }
 
     float checkExternalVoltage() {
-        int sample;
+        if (externalI2CSensorType == 0) {
-        int sampleSum = 0;
+            int sample;
-        for (int i = 0; i < 100; i++) {
+            int sampleSum = 0;
-            #ifdef HAS_ADC_CALIBRATION
+            for (int i = 0; i < 100; i++) {
-                if (calibrationEnable){
+                #ifdef HAS_ADC_CALIBRATION
-                    sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
+                    if (calibrationEnable){
-                } else {
+                        sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
+                    } else {
+                        sample = analogRead(Config.battery.externalVoltagePin);
+                    }
+                #else
                     sample = analogRead(Config.battery.externalVoltagePin);
+                #endif
+                sampleSum += sample;
+                delayMicroseconds(50);
+            }
+
+            float extVoltage;
+            #ifdef HAS_ADC_CALIBRATION
+                if (calibrationEnable) {
+                    extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100.0, &adc_chars) * voltageDividerTransformation; // in mV
+                    extVoltage /= 1000.0;
+                } else {
+                    extVoltage = ((((sampleSum/100.0)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
                 }
             #else
-                sample = analogRead(Config.battery.externalVoltagePin);
+                extVoltage = ((((sampleSum/100.0)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
             #endif
-            sampleSum += sample;
+            
-            delayMicroseconds(50);
+            return extVoltage; // raw voltage without mapping
-        }
 
-        float extVoltage;
+            // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
-        #ifdef HAS_ADC_CALIBRATION
+        } else if (externalI2CSensorType == 1) { // INA219
-            if (calibrationEnable){
+            int sampleSum = 0;
-                extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars) * voltageDividerTransformation; // in mV
+            for (int i = 0; i < 100; i++) {
-                extVoltage /= 1000;
+                sampleSum += ina219.getBusVoltage_V() * 1000.0;
-            } else {
+                delayMicroseconds(50);
-                extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
             }
-        #else
+            float extVoltage = sampleSum/100.0;
-            extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
+            return extVoltage/1000.0;
-        #endif
+        } else {
-        
+            return 0.0;
-        return extVoltage; // raw voltage without mapping
+        }
-
-        // return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
     }
 
     void startupBatteryHealth() {

src/configuration.cpp

@@ -111,11 +111,12 @@ bool Configuration::writeFile() {
         data["battery"]["internalSleepVoltage"]     = battery.internalSleepVoltage;
 
         data["battery"]["sendExternalVoltage"]      = battery.sendExternalVoltage;
-        data["battery"]["externalVoltagePin"]       = battery.externalVoltagePin;
         data["battery"]["monitorExternalVoltage"]   = battery.monitorExternalVoltage;
         data["battery"]["externalSleepVoltage"]     = battery.externalSleepVoltage;
+        data["battery"]["useExternalI2CSensor"]     = battery.useExternalI2CSensor;
         data["battery"]["voltageDividerR1"]         = battery.voltageDividerR1;
         data["battery"]["voltageDividerR2"]         = battery.voltageDividerR2;
+        data["battery"]["externalVoltagePin"]       = battery.externalVoltagePin;
 
         data["battery"]["sendVoltageAsTelemetry"]   = battery.sendVoltageAsTelemetry;
 
@@ -297,21 +298,23 @@ bool Configuration::readFile() {
             !data["battery"].containsKey("monitorInternalVoltage") ||
             !data["battery"].containsKey("internalSleepVoltage") ||
             !data["battery"].containsKey("sendExternalVoltage") ||
-            !data["battery"].containsKey("externalVoltagePin") ||
             !data["battery"].containsKey("monitorExternalVoltage") ||
             !data["battery"].containsKey("externalSleepVoltage") ||
+            !data["battery"].containsKey("useExternalI2CSensor") ||
             !data["battery"].containsKey("voltageDividerR1") ||
             !data["battery"].containsKey("voltageDividerR2") ||
+            !data["battery"].containsKey("externalVoltagePin") ||
             !data["battery"].containsKey("sendVoltageAsTelemetry")) needsRewrite = true;
         battery.sendInternalVoltage     = data["battery"]["sendInternalVoltage"] | false;
         battery.monitorInternalVoltage  = data["battery"]["monitorInternalVoltage"] | false;
         battery.internalSleepVoltage    = data["battery"]["internalSleepVoltage"] | 2.9;
         battery.sendExternalVoltage     = data["battery"]["sendExternalVoltage"] | false;
-        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"] | 34;
         battery.monitorExternalVoltage  = data["battery"]["monitorExternalVoltage"] | false;
         battery.externalSleepVoltage    = data["battery"]["externalSleepVoltage"] | 10.9;
+        battery.useExternalI2CSensor    = data["battery"]["useExternalI2CSensor"] | false;
         battery.voltageDividerR1        = data["battery"]["voltageDividerR1"] | 100.0;
         battery.voltageDividerR2        = data["battery"]["voltageDividerR2"] | 27.0;
+        battery.externalVoltagePin      = data["battery"]["externalVoltagePin"] | 34;
         battery.sendVoltageAsTelemetry  = data["battery"]["sendVoltageAsTelemetry"] | false;
 
         if (!data["wxsensor"].containsKey("active") ||
@@ -479,11 +482,12 @@ void Configuration::setDefaultValues() {
     battery.internalSleepVoltage    = 2.9;
 
     battery.sendExternalVoltage     = false;
-    battery.externalVoltagePin      = 34;
     battery.monitorExternalVoltage  = false;
     battery.externalSleepVoltage    = 10.9;
+    battery.useExternalI2CSensor    = false;
     battery.voltageDividerR1        = 100.0;
     battery.voltageDividerR2        = 27.0;
+    battery.externalVoltagePin      = 34;
 
     battery.sendVoltageAsTelemetry  = false;
 

src/lora_utils.cpp

@@ -93,6 +93,16 @@ namespace LoRa_Utils {
         #if defined(HAS_SX1278) || defined(HAS_SX1276)
             radio.setDio0Action(setFlag, RISING);
         #endif
+
+        /*#ifdef SX126X_DIO3_TCXO_VOLTAGE
+            if (radio.setTCXO(float(SX126X_DIO3_TCXO_VOLTAGE)) == RADIOLIB_ERR_NONE) {
+                Utils::println("Set LoRa Module TCXO Voltage to:" + String(SX126X_DIO3_TCXO_VOLTAGE));
+            } else {
+                Utils::println("Set LoRa Module TCXO Voltage failed! State: " + String(state));
+                while (true);
+        }
+         #endif*/
+         
         radio.setSpreadingFactor(Config.loramodule.rxSpreadingFactor);
         radio.setCodingRate(Config.loramodule.rxCodingRate4);
         float signalBandwidth = Config.loramodule.rxSignalBandwidth/1000;
@@ -103,6 +113,11 @@ namespace LoRa_Utils {
             radio.setRfSwitchPins(RADIO_RXEN, RADIO_TXEN);
         #endif
 
+        /*#ifdef SX126X_DIO2_AS_RF_SWITCH
+        radio.setRfSwitchPins(RADIO_RXEN, RADIOLIB_NC);
+        radio.setDio2AsRfSwitch(true);
+        #endif*/
+
         #ifdef HAS_1W_LORA  // Ebyte E22 400M30S (SX1268) / 900M30S (SX1262) / Ebyte E220 400M30S (LLCC68)
             state = radio.setOutputPower(Config.loramodule.power); // max value 20dB for 1W modules as they have Low Noise Amp
             radio.setCurrentLimit(140); // to be validated (100 , 120, 140)?

src/telemetry_utils.cpp

@@ -122,7 +122,7 @@ namespace TELEMETRY_Utils {
         telemetryCounter++;
         if (telemetryCounter == 1000) telemetryCounter = 0;
         if (Config.battery.sendInternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkInternalVoltage(), false, 0);
-        if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkExternalVoltage(), false, 1);
+        if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(BATTERY_Utils::checkExternalVoltage(), false, Config.battery.useExternalI2CSensor ? 0 : 1);
         telemetry += "|";
         return telemetry;
     }

src/web_utils.cpp

@@ -228,6 +228,9 @@ namespace WEB_Utils {
         }
 
         Config.battery.sendExternalVoltage          = request->hasParam("battery.sendExternalVoltage", true);
+        if (Config.battery.sendExternalVoltage) {
+            Config.battery.useExternalI2CSensor     = request->hasParam("battery.useExternalI2CSensor", true);
+        }
         if (Config.battery.sendExternalVoltage) {
             Config.battery.externalVoltagePin       = getParamIntSafe("battery.externalVoltagePin", Config.battery.externalVoltagePin);
             Config.battery.voltageDividerR1         = getParamFloatSafe("battery.voltageDividerR1", Config.battery.voltageDividerR1);

src/wifi_utils.cpp

@@ -132,7 +132,7 @@ namespace WIFI_Utils {
             digitalWrite(INTERNAL_LED_PIN,LOW);
         #endif
         if (WiFi.status() == WL_CONNECTED) {
-            Serial.print("Connected as ");
+            Serial.print("\nConnected as ");
             Serial.print(WiFi.localIP());
             Serial.print(" / MAC Address: ");
             Serial.println(WiFi.macAddress());

src/wx_utils.cpp

@@ -270,21 +270,25 @@ namespace WX_Utils {
                 newPress    = 0;
                 break;
             case 5: // SHTC3
-                #ifdef LIGHTGATEWAY_PLUS_1_0
+                {
-                    sensors_event_t humidity, temp;
+                    #ifdef LIGHTGATEWAY_PLUS_1_0
-                    shtc3.getEvent(&humidity, &temp);
+                        sensors_event_t humidity, temp;
-                    newTemp     = temp.temperature;
+                        shtc3.getEvent(&humidity, &temp);
-                    newHum      = humidity.relative_humidity;
+                        newTemp     = temp.temperature;
-                    newPress    = 0;
+                        newHum      = humidity.relative_humidity;
-                #endif
+                        newPress    = 0;
+                    #endif
+                }
                 break;
             case 6: // BMP280 + AHT20
-                bmp280.takeForcedMeasurement();
+                {
-                newTemp     = bmp280.readTemperature();
+                    bmp280.takeForcedMeasurement();
-                newPress    = (bmp280.readPressure() / 100.0F);
+                    newTemp     = bmp280.readTemperature();
-                sensors_event_t humidity, temp;
+                    newPress    = (bmp280.readPressure() / 100.0F);
-                aht20.getEvent(&humidity, &temp);
+                    sensors_event_t humidity, temp;
-                newHum      = humidity.relative_humidity;
+                    aht20.getEvent(&humidity, &temp);
+                    newHum      = humidity.relative_humidity;
+                }
                 break;
         }
 

variants/ESP32_C3_OctopusLab_LoRa/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_C3_OctopusLab_LoRa
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_1W_LoRa/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_1W_LoRa_915/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa_915
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_1W_LoRa_LLCC68/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
  	-D ESP32_DIY_1W_LoRa_LLCC68
 lib_deps =
  	${common.lib_deps}

variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_1W_LoRa_Mesh_V1_2
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_LoRa/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_LoRa_915/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_915
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_LoRa_A7670/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_A7670
 lib_deps =
 	${common.lib_deps}

variants/ESP32_DIY_LoRa_A7670_915/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32_DIY_LoRa_A7670_915
 lib_deps =
 	${common.lib_deps}

variants/LoRaHAM_V2/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LoRaHAM_V2
 lib_deps =
 	${common.lib_deps}

variants/OE5HWN_MeshCom/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D OE5HWN_MeshCom
 lib_deps =
 	${common.lib_deps}

variants/QRPLabs_LightGateway_1_0/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LIGHTGATEWAY_1_0
 lib_deps =
 	${common.lib_deps}

variants/QRPLabs_LightGateway_Plus_1_0/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D LIGHTGATEWAY_PLUS_1_0
 lib_deps =
 	${common.lib_deps}

variants/TROY_LoRa_APRS/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TROY_LoRa_APRS
 lib_deps =
 	${common.lib_deps}

variants/WEMOS-D1-R32-RA02/platformio.ini

@@ -2,6 +2,9 @@
 board = wemos_d1_uno32
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_D1_R32_RA02
 lib_deps =
 	${common.lib_deps}

variants/WEMOS-LOLIN32-OLED-DIY/platformio.ini

@@ -2,6 +2,9 @@
 board = lolin32
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_LOLIN32_OLED_DIY_LoRa
 lib_deps =
 	${common.lib_deps}

variants/WEMOS_S2_MINI_DIY_LoRa/platformio.ini

@@ -2,6 +2,9 @@
 board = lolin_s2_mini
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D WEMOS_S2_MINI_DIY_LoRa
 lib_deps =
 	${common.lib_deps}

variants/XIAO_ESP32S3_WIO_SX1262/platformio.ini

@@ -3,6 +3,9 @@ board = seeed_xiao_esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D XIAO_ESP32S3_LORA
 lib_deps =
 	${common.lib_deps}

variants/esp32c3_DIY_1W_LoRa/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32C3_DIY_1W_LoRa
 lib_deps =
 	${common.lib_deps}

variants/esp32c3_DIY_1W_LoRa_915/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D ESP32C3_DIY_1W_LoRa_915
 lib_deps =
 	${common.lib_deps}

variants/heltec-lora32-v2/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V2
 lib_deps =
 	${common.lib_deps}

variants/heltec_ht-ct62/platformio.ini

@@ -3,6 +3,9 @@ board = esp32-c3-devkitm-1
 board_build.mcu = esp32c3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_HTCT62
 lib_deps =
 	${common.lib_deps}

variants/heltec_wifi_lora_32_V3/platformio.ini

@@ -3,6 +3,9 @@ board = heltec_wifi_lora_32_V3
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V3
 lib_deps =
 	${common.lib_deps}

variants/heltec_wifi_lora_32_V3_2/platformio.ini

@@ -3,6 +3,9 @@ board = heltec_wifi_lora_32_V3
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_V3_2
 lib_deps =
 	${common.lib_deps}

variants/heltec_wireless_bridge/platformio.ini

@@ -2,6 +2,9 @@
 board = esp32dev
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WIRELESS_BRIDGE
 lib_deps =
 	${common.lib_deps}

variants/heltec_wireless_paper_v1/platformio.ini

@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WP_V1
 	-D WIRELESS_PAPER
 lib_deps =

variants/heltec_wireless_stick/platformio.ini

@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WS
 lib_deps =
 	${common.lib_deps}

variants/heltec_wireless_stick_lite_v3/platformio.ini

@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WSL_V3
 lib_deps =
 	${common.lib_deps}

variants/heltec_wireless_stick_lite_v3_display/platformio.ini

@@ -3,6 +3,9 @@ board = esp32-s3-devkitc-1
 board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D HELTEC_WSL_V3_DISPLAY
 lib_deps =
 	${common.lib_deps}

variants/heltec_wireless_tracker/platformio.ini

@@ -27,6 +27,9 @@ build_flags =
 	-D LOAD_FONT8
 	-D SPI_FREQUENCY=27000000
 	-D USE_HSPI_PORT
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43

variants/ttgo-lora32-v21/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_LORA32_V2_1
 lib_deps =
 	${common.lib_deps}

variants/ttgo-lora32-v21_915/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-lora32-v21
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_LORA32_V2_1_915
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1_2/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1_2_915/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2_915
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1_2_SX1262/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_2_SX1262
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1_915/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX126X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0_915
 lib_deps =
 	${common.lib_deps}

variants/ttgo-t-beam-v1_SX1268/platformio.ini

@@ -2,6 +2,9 @@
 board = ttgo-t-beam
 build_flags =
 	${common.build_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 	-D TTGO_T_BEAM_V1_0_SX1268
 lib_deps =
 	${common.lib_deps}

variants/ttgo_lora32_t3s3_v1_2/platformio.ini

@@ -5,6 +5,9 @@ board_upload.flash_size = 4MB
 build_flags =
     ${common.build_flags}
 	${common.usb_flags}
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
     -D TTGO_LORA32_T3S3_V1_2
 lib_deps =
 	${common.lib_deps}

variants/ttgo_t_beam_s3_SUPREME_v3/platformio.ini

@@ -4,6 +4,9 @@ board_build.mcu = esp32s3
 build_flags =
 	${common.build_flags}
 	${common.usb_flags}
+	-D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
     -D TTGO_T_Beam_S3_SUPREME_V3
 lib_deps =
   	${common.lib_deps}

variants/ttgo_t_deck_GPS/platformio.ini

@@ -44,6 +44,9 @@ build_flags =
     -D LOAD_FONT8
     -D SPI_FREQUENCY=40000000
     -D SPI_READ_FREQUENCY=16000000
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43

variants/ttgo_t_deck_plus/platformio.ini

@@ -44,6 +44,9 @@ build_flags =
     -D LOAD_FONT8
     -D SPI_FREQUENCY=40000000
     -D SPI_READ_FREQUENCY=16000000
+    -D RADIOLIB_EXCLUDE_LR11X0=1
+	-D RADIOLIB_EXCLUDE_SX127X=1
+	-D RADIOLIB_EXCLUDE_SX128X=1
 lib_deps =
 	${common.lib_deps}
 	bodmer/TFT_eSPI @ 2.5.43